Two-Dimensional Materials for High-Energy Solid-State Asymmetric Pseudocapacitors with High Mass Loadings

Vertical growth of compact and large-area MoS2 nanosheet arrays on Ti3C2Tx for efficient bifunctional electrochemical energy storage and hydrogen evolution

The developments in hydrogen evolution reaction (HER) and supercapacitor technologies for electrochemical energy storage and conversion have received considerable attention. Although MoS2 is electrochemically active for both HER and supercapacitors, limited active sites, slow ionic transport, and poor conductivity lead to its poor capacitance and electrocatalytic activity. Herein, hierarchical Ti3C2Tx/MoS2/Ti3C2Tx@CC (TMT@CC) composites were well-designed as electrodes for both HER and supercapacitors. Flexible TMT@CC electrodes with an area as large as ∼ 80 cm2 and optimal mass-loading of 17.9 mg cm-2 were achieved. The inner layer Ti3C2Tx in the composites provides ideal nucleation sites for the growth of MoS2 arrays, and the outermost Ti3C2Tx effectively anchors the vertically arrayed MoS2. The hierarchically vertical structure provides strong interfacial coupling and shortens ion diffusion paths, leading to high stability and fast ion/electron transport kinetics. Due to such a synergistic effect, the flexible binder-free TMT@CC electrodes exhibited high areal capacitance (5.06 F cm-2 at 5 mA cm-2) for supercapacitors and low overpotential (119 mV versus RHE at 10 mA cm-2) for HER catalyst. Furthermore, a high energy density of 0.125 mWh cm-2 at a power density of 1.5 mW cm-2 has been achieved from the TMT@CC-based symmetric supercapacitor. Our strategy can be expanded to other vertically arrayed hierarchical structures as electrode materials of efficient HER and supercapacitors.

Designing of two dimensional lanthanum cobalt hydroxide engineered high performance supercapacitor for longer stability under redox active electrolyte

Redox active electrolyte supercapacitors differ significantly from the conventional electrolytes based storage devices but face a long term stability issue which requires a different approach while designing the systems. Here, we show the change in layered double hydroxides (LDHs) systems with rare earth elements (lanthanum) can drastically influence the stability of two dimensional LDH systems in redox electrolyte. We find that the choice of rare earth element (lanthanum) having magnetic properties and higher thermal and chemical stability has a profound effect on the stability of La-Co LDHs electrode in redox electrolyte. The fabricated hybrid device with rare earth based positive electrode and carbon as negative electrode having redox electrolyte leads to long stable high volumetric/gravimetric capacity at high discharge rate, demonstrates the importance of considering the rare earth elements while designing the LDH systems for redox active supercapacitor development.

An electrochemically reduced ultra-high mass loading three-dimensional carbon nanofiber network: a high energy density symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V

Commercial supercapacitors need a high mass loading of more than 10 mg cm^-2 and a high working potential window to resolve the low energy density concern. Herein, we have demonstrated a thick, ultrahigh mass loading (35 mg cm^-2) and wide cell voltage electrochemically reduced layer-by-layer three-dimensional carbon nanofiber network (LBL 3D-CNF) electrode via electrospinning, sodium borohydride treatment, carbonization, and electro-reduction techniques. During the electro-reduction technique, Na⁺ is adsorbed onto the various defect sites of LBL 3D-CNFs, which properly inhibits the formation of the intermediate HER (hydrogen evolution reaction) product, leading to a wide cell voltage, whereas the LBL 3D-CNF network evokes an opportunity for storing a greater number of charges, resulting in excellent electrochemical performances. A symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V is constructed and demonstrated. The as-constructed device can deliver an areal energy output of 1922 μW h cm^-2 at a power density of 3979 W kg^-1 equal to a gravimetric energy density of 27 W h kg^-1, and an outstanding cyclic durability of 97.4% after 20 000 GCD cycles. These record-breaking performances would make our device one of the most promising candidates from an industrial point of view.

Porous Carbon Nanosheets Armoring 3D Current Collectors toward Ultrahigh Mass Loading for High-Energy-Density All-Solid-State Supercapacitors

The in situ growth of active materials on 3D current collectors (such as Ni foams) presents facile and efficient access to high-performance supercapacitors. However, the low surface area of current collectors limits the mass loading, microstructure, and capacitive performance of active materials thereon. Herein, we develop a novel surface modification with hierarchical N-rich carbon nanosheets on Ni foams via a simple sol-gel method. At the same time, its favorable effects on mass loading and utilization are demonstrated using NiCoMn-carbonate hydroxide (NCM) as a model active material. Specifically, the carbon modification greatly boosts the current collector's specific surface area and enables the growth of dense NCM nanoneedles with controllable mass loading ranging from 5.2 to 23.1 mg cm-2. Meanwhile, the correlation between mass loading and utilization is systematically studied, which shows the well-maintained energy storage efficiency due to the conducive surface modification. As a result, excellent performance with the ultrahigh area-specific capacity of 19.36 F cm-2 at 2 mA cm-2 in the three-electrode configuration and remarkable area-specific energy density of 1352 μW h cm-2 in the solid-state asymmetric device can be achieved, demonstrating a prospective pathway toward facile and effective current collector designs for high-energy/power-density supercapacitors.

Emergence of Ni-Based Chalcogenides (S and Se) for Clean Energy Conversion and Storage

Nickel chalcogenide (S and Se) based nanostructures intrigued scientists for some time as materials for energy conversion and storage systems. Interest in these materials is due to their good electrochemical stability, eco-friendly nature, and low cost. The present review compiles recent progress in the area of nickel-(S and Se)-based materials by providing a comprehensive summary of their structural and chemical features and performance. Improving properties of the materials, such as electrical conductivity and surface characteristics (surface area and morphology), through strategies like nano-structuring and hybridization, are systematically discussed. The interaction of the materials with electrolytes, other electro-active materials, and inactive components are analyzed to understand their effects on the performance of energy conversion and storage devices. Finally, outstanding challenges and possible solutions are briefly presented with some perspectives toward the future development of these materials for energy-oriented devices with high performance.

High mass loading flower-like MnO2 on NiCo2O4 deposited graphene/nickel foam as high-performance electrodes for asymmetric supercapacitors

The implementation of high mass loading MnO₂ on electrochemical electrodes of supercapacitors is currently challenging due to the poor electrical conductivity and elongated electron/ion transport distance. In this paper, a NiCo₂O₄/MnO₂ heterostructure was built on the surface of three-dimensional graphene/nickel foam (GNF) by a hydrothermal method. The petal structured NiCo₂O₄ loaded on graphene played a wonderful role as a supporting framework, which provided more space for the growth of high mass loading MnO₂ microflowers, thereby increasing the utilization rate of the active material MnO₂. The GNF@NiCo₂O₄/MnO₂ composite was used as a positive electrode and achieved a high areal capacitance of 1630.5 mF cm^-2 at 2 mA cm^-2 in the neutral Na₂SO₄ solution. The asymmetric supercapacitor assembled with the GNF@NiCo₂O₄/MnO₂ positive electrode and activated carbon negative electrode possessed a wide voltage window (2.1 V) and splendid energy density (45.9 Wh kg^-1), which was attributed to the satisfactory electroactive area, low resistance, quick mass diffusion and ion transport caused by high mass loading MnO₂.

Quaternary Cu2FeSnS4/PVP/rGO Composite for Supercapacitor Applications

Electrochemical energy storage is a current research area to address energy challenges of the modern world. The Cu2FeSnS4/PVP/rGO-decorated nanocomposite using PVP as the surface ligand was explored in a simple one-step solvothermal route, for studying their electrochemical behavior by designing asymmetric hybrid supercapacitor devices. The full cell three-electrode arrangements delivered 748 C/g (62.36 mA h/g) at 5 mV/s employing CV and 328 F/g (45.55 mA h/g) at 0.5 A/g employing GCD for the Cu2FeSnS4/PVP/rGO electrode. The half-cell two-electrode device can endow with 73 W h/kg and 749 W/kg at 1 A/g energy and power density. Furthermore, two Cu2FeSnS4/PVP/rGO//AC asymmetric devices connected in series for illuminating a commercial red LED more than 1 min were explored. This work focuses the potential use of transition-metal chalcogenide composite and introduces a new material for designing high-performance supercapacitor applications.

Bottom-up Approach for Designing Cobalt Tungstate Nanospheres through Sulfur Amendment for High-Performance Hybrid Supercapacitors

Nanofabrication of heteroatom-doped metal oxides into a well-defined architecture via a "bottom-up" approach is crucial to overcome the boundaries of the metal oxides for energy storage systems. In the present work, this issue was addressed by developing sulfur-doped bimetallic cobalt tungstate (CoWO₄ ) porous nanospheres for efficient hybrid supercapacitors via a single-step, ascendable bottom-up approach. The combined experimental and kinetics studies revealed enhanced electrical conductivity, porosity, and openness for ion migration after amendments of the CoWO₄ via sulfur doping. As a result, the sulfur-doped CoWO₄ nanospheres exhibited a specific capacity of 248.5 mA h g^-1 with outstanding rate capability and cycling stability. The assembled hybrid supercapacitor cell with sulfur-doped CoWO₄ nanospheres and activated carbon electrodes could be driven reversibly in a voltage of 1.6 V and exhibited a specific capacitance of 177.25 F g^-1 calculated at 1.33 A g^-1 with a specific energy of 63.41 Wh kg^-1 at 1000 W kg^-1 specific power. In addition, the hybrid supercapacitor delivered 94.85 % initial capacitance over 10000 charge-discharge cycles. The excellent supercapacitive performance of sulfur-doped CoWO₄ nanospheres may be credited to the sulfur doping and bottom-up fabrication of the electrode materials.

True Meaning of Pseudocapacitors and Their Performance Metrics: Asymmetric versus Hybrid Supercapacitors

The development of pseudocapacitive materials for energy-oriented applications has stimulated considerable interest in recent years due to their high energy-storing capacity with high power outputs. Nevertheless, the utilization of nanosized active materials in batteries leads to fast redox kinetics due to the improved surface area and short diffusion pathways, which shifts their electrochemical signatures from battery-like to the pseudocapacitive-like behavior. As a result, it becomes challenging to distinguish "pseudocapacitive" and "battery" materials. Such misconceptions have further impacted on the final device configurations. This Review is an earnest effort to clarify the confusion between the battery and pseudocapacitive materials by providing their true meanings and correct performance metrics. A method to distinguish battery-type and pseudocapacitive materials using the electrochemical signatures and quantitative kinetics analysis is outlined. Taking solid-state supercapacitors (SSCs, only polymer gel electrolytes) as an example, the distinction between asymmetric and hybrid supercapacitors is discussed. The state-of-the-art progress in the engineering of active materials is summarized, which will guide for the development of real-pseudocapacitive energy storage systems.

Asymmetric Pseudocapacitors Based on Interfacial Engineering of Vanadium Nitride Hybrids

Vanadium nitride (VN) shows promising electrochemical properties as an energy storage devices electrode, specifically in supercapacitors. However, the pseudocapacitive charge storage in aqueous electrolytes shows mediocre performance. Herein, we judiciously demonstrate an impressive pseudocapacitor performance by hybridizing VN nanowires with pseudocapacitive 2D-layered MoS2 nanosheets. Arising from the interfacial engineering and pseudocapacitive synergistic effect between the VN and MoS2, the areal capacitance of VN/MoS2 hybrid reaches 3187.30 mF cm-2, which is sevenfold higher than the pristine VN (447.28 mF cm-2) at a current density of 2.0 mA cm-2. In addition, an asymmetric pseudocapacitor assembled based on VN/MoS2 anode and TiN coated with MnO2 (TiN/MnO2) cathode achieves a remarkable volumetric capacitance of 4.52 F cm-3 and energy density of 2.24 mWh cm-3 at a current density of 6.0 mA cm-2. This work opens a new opportunity for the development of high-performance electrodes in unfavorable electrolytes towards designing high areal-capacitance electrode materials for supercapacitors and beyond.

Transition metal sulfide-laminated copper wire for flexible hybrid supercapacitor

The CV profiles of transition metal sulphide electrodes on a Cu-wire (a), and (b) capacitive (light to dark: blue and red) and diffusion-controlled (dark: blue and red) contributions of the hybrid Cu@CoS/NiCo₂S₄ and Cu@ZnCo₂S₄ electrodes.