Oxygen Vacancy-rich Ni/NiO@NC Nanosheets with Schottky Heterointerface for Efficient Urea Oxidation Reaction

Ni3Fe/NiFe2O4 heterojunction engineering and vanadium promoter synergetically accelerating urea degradation

Urea oxidation reaction (UOR) is significant in reducing hydrogen production energy consumption and treating urea wastewater, necessitating the development of efficient UOR electrocatalysts. Herein, we develop a vanadium (V)-doped Ni3Fe/NiFe2O4 heterojunction (V-Ni3Fe/NiFe2O4), wherein the combined effect of V doping and the heterojunction architecture improve the material's conductivity, facilitate electron transfer, and optimize the electronic structure of active sites. Consequently, the V-Ni3Fe/NiFe2O4 electrocatalyst requires a potential of only 1.48 V to achieve a current density of 100 mA·cm-2 and achieves ∼78 % urea degradation within 3 h. Density functional theory calculations reveal that V doping increases the density of states near the Fermi level of Ni3Fe/NiFe2O4, thereby enhancing the electron transfer capability. Moreover, the formation of the heterojunction structure improves urea adsorption and lowers the energy barrier for the UOR. This study offers valuable insights for the rational design of heterojunction-based UOR electrocatalysts.

Accelerating the reaction kinetics of Ni1-xO/Ni(OH)2/NF by defect engineering for urea-assisted water splitting

Developing electrocatalysts with fast reaction kinetics for the urea oxidation reaction (UOR) in the field of sustainable hydrogen production through urea-assisted water splitting remains challenging. Here, Ni1-xO/Ni(OH)2 supported on nickel foam (Ni1-xO/Ni(OH)2/NF) is prepared via a defect engineering strategy by combining Zn doping and acid etching. The doped Zn species are partially removed, facilitating the formation of NiOOH during acid etching. Residual Zn species modulate the electronic structure of nickel sites, which intrinsically accelerate the reaction kinetics of Ni1-xO/Ni(OH)2/NF. Ni1-xO/Ni(OH)2/NF exhibits excellent performance for the UOR with a low potential of 1.346 V versus the reversible hydrogen electrode to attain 100 mA cm-2, fast reaction kinetics (18.7 mV dec-1), and excellent stability in an alkaline electrolyte. The enhanced reaction kinetics of Ni1-xO/Ni(OH)2/NF are clearly elucidated by operando electrochemical impedance spectroscopy and in situ Raman spectroscopy. Our study offers an effective approach for designing promising Ni-based UOR catalysts for the practical application of urea-assisted water splitting.

Constructing Built-in-Electric Field for Boosting Electrocatalytic Water Splitting

Electrocatalytic water splitting shows great potential for producing clean and green hydrogen, but it is hindered by slow reaction kinetics. Advanced electrocatalysts are needed to lower the energy barriers. The establishment of built-in electric fields (BIEF) in heterointerfaces has been found to be beneficial for speeding up electron transfer, increasing electrical conductivity, adjusting the local reaction environment, and optimizing the chemisorption energy with intermediates. Engineering and modifying the BIEF in heterojunctions offer significant opportunities to enhance the electronic properties of catalysts, thus improving the reaction kinetics. This comprehensive review focuses on the latest advances in BIEF engineering in heterojunction catalysts for efficient water electrolysis. It highlights the fundamentals, engineering, modification, characterization, and application of BIEF in electrocatalytic water splitting. The review also discusses the challenges and future prospects of BIEF engineering. Overall, this review provides a thorough examination of BIEF engineering for the next generation of water electrolysis devices.

3D NiCoW Metallic Compound Nano-Network Structure Catalytic Material for Urea Oxidation

Urea shows promise as an alternative substrate to water oxidation in electrolyzers, and replacing OER with the Urea Oxidation Reaction (UOR, theoretical potential of 0.37 V vs. RHE) can significantly increase hydrogen production efficiency. Additionally, the decomposition of urea can help reduce environmental pollution. This paper improves the inherent activity of catalytic materials through morphology and electronic modulation by incorporating tungsten (W), which accelerates electron transfer, enhances the electronic structure of neighboring atoms to create a synergistic effect, and regulates the adsorption process of active sites and intermediates. NiCoW catalytic materials with an ultra-thin nanosheet structure were prepared using an ultrasonic-assisted NaBH4 reduction method. The results show that during the OER process, NiCoW catalytic materials have a potential of only 1.53 V at a current density of 10 mA/cm2, while the UOR process under the same conditions requires a lower potential of 1.31 V, demonstrating superior catalytic performance. In a mixed electrolyte of 1 M KOH and 0.5 M urea, overall water splitting also shows excellent performance. Therefore, the designed NiCoW electrocatalyst, with its high catalytic activity, provides valuable insights for enhancing the efficiency of water electrolysis for hydrogen production and holds practical research significance.

Interface engineering in Ni(OH)2/NiOOH heterojunction to enhance energy-efficient hydrogen production via urea electrolysis

Electrochemical urea electrolysis has merged as a promising alternative to conventional water splitting methods for hydrogen fuel production due to its cost-effectiveness and superior energy efficiency. The utilization of heterostructures has been proposed as a viable strategy to improve the efficiency of the urea oxidation reaction (UOR) by augmenting the quantity of active sites and optimizing the electronic structure. In this study, a Ni(OH)2/NiOOH heterojunction, referred to as H-Ni, was synthesized via a straightforward hydrothermal synthesis method. The notable performance of H-Ni in UOR is ascribed to the synergistic interaction between Ni(OH)2 and NiOOH, which constitute the principal components of the catalyst. Density functional theory (DFT) calculations reveal that the H-Ni composite is capable of modulating the d-band center, thereby enhancing the adsorption and desorption of reaction intermediates and decreasing the Gibbs free energy (ΔG) associated with the rate-determining step (RDS) of the UOR. Experimental results from catalytic performance tests indicate that the H-Ni-140 catalyst attains a current density of 10 mA·cm-2 in a 1.0 M KOH electrolyte containing 0.33 M urea at a relatively low potential of 1.341 V versus reversible hydrogen electrode (RHE), thereby highlighting its superior electrocatalytic performance. Furthermore, the catalyst requires only a cell voltage of 1.78 V to achieve a current density of 100 mA·cm-2, which is approximately 120 mV lower than that required for water electrolysis. This work presents a straightforward methodology for the cost-effective development of heterojunction catalysts.

Ni─Co─O─S Derived Catalysts on Hierarchical N-doped Carbon Supports with Strong Interfacial Interactions for Improved Hybrid Water Splitting Performance

Simultaneously improving electrochemical activity and stability is a long-term goal for water splitting. Herein, hierarchical N-doped carbon nanotubes on carbon nanowires derived from PPy are grown on carbon cloth, serving as a support for NiCo oxides/sulfides. The hierarchical electrodes annealed in N2 or H2/N2 display improved intrinsic activity and stability for hydrogen evolution reaction (HER) and glucose oxidation reaction. Compared with Pt/C||Ir/C in alkaline media, the glucose electrolysis assembled with electrodes exhibits a cell voltage of 1.38 V at 10 mA cm-2, durability for >12 h at 50 mA cm-2, and resistance to glucose/gluconic acid poisoning. In addition, electrocatalysts can also be applied in ethanol oxidation reactions. Systematic characterizations reveal the strong interactions between NiCo and N-doped carbon support-induced partial charge transfer at the interface and regulate the local electronic structure of active sites. Density functional theory calculations demonstrate that the synergistic effect between N-doped carbon supports, metallic NiCo, and NiCo oxides/sulfides optimize the adsorption energy of H2O and the H* free energy for HER. The energy barrier of the dehydrogenation of glucose effectively decreased. This work will attract attention to the role of metal-support interactions in enhancing the intrinsic activity and stability of electrocatalysts.

Revealing the Electro-oxidation Mechanism of 5-Aminotetrazole on Nickel-Based Oxides and Synthesizing 5,5'-Azotetrazolate Salts

With the gradual expansion of the application of organic electromechanical synthesis in the field of energetic materials, it is necessary to explore deeply the mechanisms behind the organic electromechanical oxidation of energetic materials in order to develop efficient electrocatalysts. Electrochemical synthesis of 5,5'-azotetrazolate (ZT) salts is not only environmentally friendly and efficient but also can replace oxygen evolution reaction (OER) combined with hydrogen production, significantly reducing the battery voltage of overall water splitting (OWS) and achieving low energy consumption hydrogen production. Here, we prepared the Co-modified nickel-based oxide electrodes (Ni3-xCoO4/carbon cloth (CC), x = 1, 2) as a medium to reveal the oxidative coupling mechanism of 5-aminotetrazole (5-AT). Experimental and theoretical calculations verified that Ni-catalyzed oxidative coupling of 5-AT is a proton-coupled electron transfer (PCET) process, including electron transfer of electrocatalytic intermediates (Ni2+-O + OH- = Ni3+-O(OH) + e-) and spontaneous dehydrogenation process (Ni3+-O(OH) + X-H = Ni2+-O + X•). The Ni3+-O(OH) is an extremely fast nonreducing electron transfer center that serves as a chemical oxidant to directly abstract hydrogen atoms from the 5-AT. Simultaneously, the synergistic effect of Co doping on the electric cloud around Ni causes the upshift of the d-band centers, which is conducive to the easier adsorption of OH*, forming the generation of active intermediate Ni3+-O(OH). Thus, Ni2CoO4/CC has higher Faraday efficiency (FE) and yield for the oxidation reaction of 5-AT, with a yield of approximately 72.3% after electrolysis at 1.7 V vs reversible hydrogen electrode (RHE).

Recent progress of Ni-based nanomaterials for the electrocatalytic oxygen evolution reaction at large current density

The precise design and development of high-performing oxygen evolution reaction (OER) for the production of industrial hydrogen gas through water electrolysis has been a widely studied topic. A profound understanding of the nature of electrocatalytic processes reveals that Ni-based catalysts are highly active toward OER that can stably operate at a high current density for a long period of time. Given the current gap between research and applications in industrial water electrolysis, we have completed a systematic review by constructively discussing the recent progress of Ni-based catalysts for electrocatalytic OER at a large current density, with special focus on the morphology and composition regulation of Ni-based electrocatalysts for achieving extraordinary OER performance. This review will facilitate future research toward rationally designing next-generation OER electrocatalysts that can meet industrial demands, thereby promoting new sustainable solutions for energy shortage and environment issues.

Self-supporting hierarchical Co3O4-nanowires@NiO-nanosheets core-shell nanostructure on carbon foam to form efficient bifunctional electrocatalyst for overall water splitting

Designing cost-effective and robust bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is highly desired in hydrogen production from overall water splitting, but still suffers great challenges due to the sluggish catalytic OER/HER kinetics. In this paper, a surface/defect engineering strategy is developed to synthesize three-dimensional (3D) carbon foam (CF)-supported unique hierarchical Co3O4 nanowires@NiO nanosheets core-shell nanostructured catalyst (NiO@Co3O4/CF) with rich oxygen-vacancies as a novel bifunctional catalyst for alkaline water splitting electrolysis. Benefited from the synergy of the 3D hierarchical core-shell structure and rich oxygen vacancies, the as-obtained NiO@Co3O4/CF shows both excellent OER (η200 = 325 mV, η500 = 374 mV) and HER (η10 = 104 mV) activities with low Tafel slopes (64.26 mV dec-1 for OER and 109.14 mV dec-1 for HER, respectively) and outstanding stability. A simple overall water splitting electrolysis cell assembled by this bifunctional NiO@Co3O4/CF as both OER and HER catalysts requires only a cell voltage of 1.53 V to obtain the current density of 10 mA cm-2 and displays a long-term stability. This work has successfully developed an approach for rational design and novel synthesis of metal oxide hybrids as bifunctional electrocatalysts with high activity and stability for overall water splitting.

Heteroatom Doping Promoting CoP for Driving Water Splitting

CoP nanomaterials have been extensively regarded as one of the most promising electrocatalysts for overall water splitting due to their unique bifunctionality. Although the great promise for future applications, some important issues should also be addressed. Heteroatom doping has been widely acknowledged as a potential strategy for improving the electrocatalytic performance of CoP and narrowing the gap between experimental study and industrial applications. Recent years have witnessed the rapid development of heteroatom-doped CoP electrocatalysts for water splitting. Aiming to provide guidance for the future development of more effective CoP-based electrocatalysts, we herein organize a comprehensive review of this interesting field, with the special focus on the effects of heteroatom doping on the catalytic performance of CoP. Additionally, many heteroatom-doped CoP electrocatalysts for water splitting are also discussed, and the structure-activity relationship is also manifested. Finally, a systematic conclusion and outlook is well organized to provide direction for the future development of this interesting field.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

A universal approach to dual-metal-atom catalytic sites confined in carbon dots for various target reactions

Here, a molecular-design and carbon dot-confinement coupling strategy through the pyrolysis of bimetallic complex of diethylenetriamine pentaacetic acid under low-temperature is proposed as a universal approach to dual-metal-atom sites in carbon dots (DMASs-CDs). CDs as the "carbon islands" could block the migration of DMASs across "islands" to achieve dynamic stability. More than twenty DMASs-CDs with specific compositions of DMASs (pairwise combinations among Fe, Co, Ni, Mn, Zn, Cu, and Mo) have been synthesized successfully. Thereafter, high intrinsic activity is observed for the probe reaction of urea oxidation on NiMn-CDs. In situ and ex situ spectroscopic characterization and first-principle calculations unveil that the synergistic effect in NiMn-DMASs could stretch the urea molecule and weaken the N-H bond, endowing NiMn-CDs with a low energy barrier for urea dehydrogenation. Moreover, DMASs-CDs for various target electrochemical reactions, including but not limited to urea oxidation, are realized by optimizing the specific DMAS combination in CDs.

Surface Engineering over Metal-Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co-phytate coordination complex on the Ni-based metal-organic framework (MOF) nanosheet array (CC/Ni-BDC@Co-PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co-PA modification over Ni-BDC can manipulate the electronic state of Ni sites, and in situ evolved charge-redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co-PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO3 2- approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni-BDC@Co-PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm-2 , a small Tafel slope of 45 mV dec-1 , and strong durability, comparable to the best Ni-based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF-based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal-PA complex.

In-Site Grown NiFeOOH Nanosheets Foam Directly as Robust Electrocatalyst for Efficient Urea Oxidation Application

In this work, a series of morphology-controlled NiFeOOH nanosheets were directly developed through a one-step mild in-situ acid-etching hydrothermal process. Benefiting from the ultrathin interwoven geometric structure and most favorable electron transport structure, the NiFeOOH nanosheets synthesized under 120 °C (denoted as NiFe_120) exhibited the optimal electrochemical performance for urea oxidation reaction (UOR). An overpotential of merely 1.4 V was required to drive the current density of 100 mA cm-2 , and the electrochemical activity remains no change even after 5000 cycles' accelerated degradation test. Moreover, the assembled urea electrolysis set by using the NiFe_120 as bifunctional catalysts presented a reduced potential of 1.573 V at 10 mA cm-2 , which was much lower than that of overall water splitting. We believe this work will lay a foundation for developing high-performance urea oxidation catalysts for the large-scale production of hydrogen and purification of urea-rich sewage.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

Unconventional Phase Synergies with Doping Engineering Over Ni Electrocatalyst Featuring Regulated Electronic State for Accelerated Urea Oxidation

Exploring high-performing Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy technologies yet remains a daunting challenge. In this study, a synergistic anomalous hcp phase and heteroatom doping engineering over metallic Ni are found to enhance the UOR. A metal-organic framework-mediated approach is proposed to construct Ni nanoparticles (NPs) with designated crystal phase embedded in N-doped carbon (fcc-Ni/NC and hcp-Ni/NC). Significant crystal phase-dependent catalytic activity for the UOR is observed; hcp-Ni/NC, featuring unusual hcp phase, outperforms fcc-Ni/NC with conventional fcc phase. Moreover, incorporating foreign Mn species in hcp-Ni/NC can further dramatically promote UOR, making it among the best UOR catalysts reported to date. From experimental results and DFT calculations, the specific nanoarchitecture, involving an anomalous hcp phase together with Mn doping engineering, endows hcp-MnNi/NC with abundant exposed active sites, facile charge transfer, and more significantly, optimized electronic state, giving rise to enriched Ni³⁺ active species and oxygen vacancies on the catalyst surface during electrocatalysis. These features collectively contribute to the enhanced UOR activity. This work highlights a potent design strategy to develop advanced catalysts with regulated electronic state through synergistic crystal phase and doping engineering.

Heterogeneous Ni-MoN nanosheet-assembled microspheres for urea-assisted hydrogen production

Electrocatalytic water splitting is a promising technology for sustainable hydrogen (H₂) production; however, it is restricted by the kinetically sluggish anodic oxygen evolution reaction (OER). Replacing OER with urea oxidation reaction (UOR) with low thermodynamic potential can simultaneously improve the energy efficiency of H₂ production and purify urea-containing wastewater. Here we report a facile assembly-calcination two-step method to synthesize heterogeneous Ni-MoN nanosheet-assembled microspheres (Ni-MoN NAMs). The nanosheet-assembled structure and the synergistic metallic Ni-MoN heterogeneous interface endow the Ni-MoN NAMs with good OER (1.52 V@10 mA cm^-2), UOR (1.28 V@10 mA cm^-2), and hydrogen evolution reaction (HER, 0.16 V@10 mA cm^-2) activity. The two-electrode urea electrolysis cell with Ni-MoN NAMs as both the cathode and anode requires an extremely low cell voltage of 1.41 V to afford 20 mA cm^-2, which is 0.3 V lower than that of the water electrolyzer, paving the way for energy-saving H₂ production.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Amorphous chromium oxide confined Ni/NiO nanoparticles-assembled nanosheets for highly efficient and stable overall urea splitting

Applications of urea oxidation reaction (UOR) in various sustainable energy-conversion systems are greatly hindered by its slow kinetics. Herein, we demonstrate an in-situ confined synthesis method that produces amorphous chromium oxide confined Ni/NiO nanoparticles-assembled nanosheets (Ni/NiO@CrOx) with fast reaction kinetics towards UOR. The confinement effect of the in-situ generated CrOx overlay contributes to ultrafine Ni/NiO nanoparticles, bringing about rich Ni/NiO and NiO/CrOx interfaces. In-situ Raman and electrochemical characterization show that both CrOx and metallic Ni can promote the formation of the NiOOH species and the electron transfer, leading to high intrinsic activity and fast reaction kinetics. At 1.40 V vs. reversible hydrogen electrode, the Ni/NiO@CrOx delivers a current density of 275 mA cm-2, which is about 2.6 and 6.1 times as large as those of the NiO@CrOx and NiO, respectively. In addition, the protective effect of the CrOx overlay leads to robust working stability towards UOR. Further, the Ni/NiO@CrOx nanosheets are used as bifunctional catalysts for overall urea splitting, and a small electrolysis cell voltage of 1.44 V is needed to reach the benchmark current density of 10 mA cm-2.

Ni2P Nanoparticle-Inserted Porous Layered NiO Hetero-Structured Nanosheets as a Durable Catalyst for the Electro-Oxidation of Urea

The electro-oxidation of urea (EOU) is a remarkable but challenging sustainable technology, which largely needs a reduced electro-chemical potential, that demonstrates the ability to remove a notable harmful material from wastewater and/or transform the excretory product of humans into treasure. In this work, an Ni₂P-nanoparticle-integrated porous nickel oxide (NiO) hetero-structured nanosheet (Ni₂P@NiO/NiF) catalyst was synthesized through in situ acid etching and a gas-phase phosphating process. The as-synthesized Ni₂P@NiO/NiF catalyst sample was then used to enhance the electro-oxidation reaction of urea with a higher urea oxidation response (50 mA cm^-2 at 1.31 V vs. RHE) and low onset oxidation potential (1.31 V). The enhanced activity of the Ni₂P@NiO/NiF catalyst was mainly attributed to effective electron transport after Ni₂P nanoparticle insertion through a substantial improvement in active sites due to a larger electrochemical surface area, and a faster diffusion of ions occurred via the interactive sites at the interface of Ni₂P and NiO; thus, the structural reliability was retained, which was further evidenced by the low charge transfer resistance. Further, the Ni₂P nanoparticle insertion process into the NiO hetero-structured nanosheets effectively enabled a synergetic effect when compared to the counter of the Ni₂P/NiF and NiO/NiF catalysts. Finally, we demonstrate that the as-synthesized Ni₂P@NiO/NiF catalyst could be a promising electrode for the EOU in urea-rich wastewater and human urine samples for environmental safety management. Overall, the Ni₂P@NiO/NiF catalyst electrode combines the advantages of the Ni₂P catalyst, NiO nanosheet network, and NiF current collector for enhanced EOU performance, which is highly valuable in catalyst development for environmental safety applications.

High-Entropy Oxide Derived from Metal-Organic Framework as a Bifunctional Electrocatalyst for Efficient Urea Oxidation and Oxygen Evolution Reactions

High-entropy oxides (HEOs) offer unique features through a combination of incompatible metal cations to a single crystalline lattice. Owing to their special characteristics such as abundant cation compositions, high entropy stabilization, chemical and thermal stability, and lattice distortion effect, they have drawn ever-increasing attention for various applications. However, very few studies have been reported for catalytic application, and developing HEOs with large surface areas for efficient catalytic application is still in infancy. Herein, we design nanostructured HEO of (FeNiCoCrCu)₃O₄ using metal-organic frameworks (MOFs) as sacrificial templates to achieve a large surface area, high density of exposed active sites, and more oxygen vacancies. Single-crystalline phase HEOs with surface area as large as 206 m² g^-1 are produced and further applied as bifunctional electrocatalysts for the urea oxidation reaction (UOR) and oxygen evolution reaction (OER). Benefiting from enhanced oxygen vacancies and a large surface area with abundant exposed active sites, the optimized HEO exhibited excellent electrocatalytic activity toward UOR with a very low potential of 1.35 V at the current density of 10 mA cm^-2 and showed long-term stability for 36 h operation, making a significant catalytic performance over previously reported HEOs. Moreover, the HEO demonstrated an efficient catalytic performance toward OER with a low overpotential of 270 mV at 10 mA cm^-2 and low Tafel slope of 49 mV dec^-1. The excellent catalytic activity is ascribed to the starting MOF precursor and favorable high-entropy effect.

In situ construction of Fe3O4@FeOOH for efficient electrocatalytic urea oxidation

Substituting water oxidation half of water splitting with anodic oxidation of urea can reduce the cost of H₂ production and provide an avenue for treating urea-rich wastewater. However, developing an efficient and stable electrocatalyst is necessary to overcome the indolent kinetics of the urea oxidation reaction (UOR). Accordingly, we have used the Schikorr reaction to deposit Fe₃O₄ particles on the nickel foam (Fe₃O₄/NF). Results from the various analysis indicated that under the operational conditions, Fe₃O₄ underwent surface reconstruction to produce a heterolayered structure wherein a catalytically active FeOOH layer encased a conducting Fe₃O₄. Fe₃O₄/NF outperformed RuO₂ as a UOR catalyst and delivered a current density of 10 50 and 100 mA cm^-2 at low applied potentials of 1.38 1.42 and 1.46 V, respectively, with a Tafel slope of 28 mV dec^-1. At the applied potential of 1.4 V, Fe₃O₄/NF demonstrated a turnover frequency (TOF) of 2.8 × 10^-3 s^-1, highlighting its superior intrinsic activity. In addition, a symmetrical urea electrolyzer constructed using Fe₃O₄/NF produced the current density of 10 mA cm^-2 at a cell voltage of 1.54 V.

Development of Electrolyzer Using NiCo(OH)2 Layered Double Hydroxide Catalyst for Efficient Water Oxidation Reaction

Over the past decade, layered double hydroxides (LDH) have been the subject of extensive investigations owing to their remarkable water splitting catalytic activity. Stability and porosity are several of the features of LDH which help them to serve as efficient oxygen evolution reaction (OER) catalysts. Based on these considerations, we synthesized NiCo(OH)₂ LDH and probed its OER electrocatalytic performance. The synthesized catalyst was subjected to X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy for structural analysis and investigation of its surface morphology, surface composition, and oxidation states. The LDH-NiCo(OH)₂ was anchored over the FTO surface and the fabricated electrode was found to exhibit a much lower OER onset potential of 265 mV, a much higher current density of 300 mAcm⁻² and a smaller Tafel slope of 41 mVdec⁻¹. Moreover, the designed catalyst was found to be stable up to 2500 repeated voltametric scans. These figures of merit regarding the structure and performance of the designed LDH are expected to provide useful insights into the fundamental understanding of the OER catalysts and their mechanisms of action, thus enabling the more rational design of cost effective and highly efficient electrocatalysts for use in water splitting.

Heterostructured Bi-Cu2S nanocrystals for efficient CO2 electroreduction to formate

The electrochemical CO₂ reduction reaction (ECO₂RR) driven by renewable electricity holds promise to store intermittent energy in chemical bonds, while producing value-added chemicals and fuels sustainably. Unfortunately, it remains a grand challenge to simultaneously achieve a high faradaic efficiency (FE), a low overpotential, and a high current density of the ECO₂RR. Herein, we report the synthesis of heterostructured Bi-Cu₂S nanocrystals via a one-pot solution-phase method. The epitaxial growth of Cu₂S on Bi leads to abundant interfacial sites and the resultant heterostructured Bi-Cu₂S nanocrystals enable highly efficient ECO₂RR with a largely reduced overpotential (240 mV lower than that of Bi), a near-unity FE (>98%) for formate production, and a high partial current density (2.4- and 5.2-fold higher J_HCOO^- than Cu₂S and Bi at -1.0 V vs. reversible hydrogen electrode, RHE). Density functional theory (DFT) calculations show that the electron transfer from Bi to Cu₂S at the interface leads to the preferential stabilization of the formate-evolution intermediate (*OCHO).

Efficient heterogeneous Ni/Ni2P catalyst for urea-assisted water electrolysis

The built-in electrophilic/nucleophilic domain promoted the favorable adsorption of urea molecules on the surface/interface of heterogeneous Ni/Ni2P for urea oxidation.

Lanthanum-incorporated β-Ni(OH)2 nanoarrays for robust urea electro-oxidation

Lanthanum-incorporated β-Ni(OH)₂ nanosheets display superior catalytic behavior and stability for urea electro-oxidation, which originates from the optimized electronic structure, the downshift of the d-band center and the increased number of exposed active sites.

Boron-modulated surface of hollow nickel framework for improved hydrogen evolution

A hollow Ni framework (HNF) is designed and prepared to utilize the exterior and interior surface active sites of a Ni-based binder-free and support-free electrode. Furthermore, the more efficient Ni-B active sites are then in situ introduced on the surface of HNF. This micro/nano structure engineering, together with the surface boron modulation, results in a synergistically enhanced catalytic effect for the HER performance.

Coaxial Ni-S@N-Doped Carbon Nanofibers Derived Hierarchical Electrodes for Efficient H2 Production via Urea Electrolysis

Electrochemical water splitting into hydrogen is a promising strategy for hydrogen production powered by solar energy. However, the cell voltage of an electrolyzer is still too high for practical application, which is mainly limited by the sluggish oxygen evolution reaction process. To this end, hybrid water electrolyzers have drawn tremendous attention. Herein, coaxial Ni/Ni₃S₂@N-doped nanofibers are directly grown on nickel foam (NF), which is highly active for hydrogen evolution reaction. Meanwhile, the Ni₃S₂@N-doped nanofibers on NF prepared in an Ar atmosphere display superior urea oxidation reaction performance to previously reported catalysts. The cell voltage is about 1.50 V in urea electrolysis to deliver a current density of 20 mA cm^-2, lower than that of a traditional water electrolyzer (1.82 V). The current density is around 77% relative to its initial value of 20 mA cm^-2 after 20 h, superior to Pt/C|Ir/C-based urea electrolysis (14%). It is found that the synergistic effect between metallic Ni and Ni₃S₂, as well as the interfacial effect between metal centers and N-doped carbon, favors the initial dissociation of H₂O and the adsorption/desorption of H* with thermal neutral Gibbs free energy. Meanwhile, the in-situ generated NiOOH on the outer surface of Ni₃S₂ possessed lower electrochemical activation energy for urea decomposition. Meanwhile, the abundant oxygen vacancies in electrodes could expose more active sites for the adsorption of intermediates, including H* and OOH*. It is also found that the hierarchical nanostructure of densely packed nanowires provides ideal electronic and ionic transport paths for fast electrocatalytic kinetics. The present work indicated that the modulation of compositions and hierarchical nanostructure is effective to prepare efficient catalysts for H₂ production via urea electrolysis.