One-Step Reductive Amination of 5-Hydroxymethylfurfural into 2,5-Bis(aminomethyl)furan over Raney Ni

Direct Reductive Amination of HMF to 5-(Aminomethyl)-2-furanmethanol Using Supported Iridium-based Catalysts

In this work, partial reductive amination of 5-hydroxymethylfurfural (HMF) with gaseous ammonia over iridium supported on γ-Al2O3, TiO2, SiO2 and carbon has been studied. The influence of the support and pressure was investigated in the valorization under mild conditions of HMF to 5-(aminomethyl)-2-furanmethanol (AMFM). The catalysts were characterized by TEM, SEM-EDS, N2 sorption Isotherms, TGA, CO-Chemisorption, TPR, XRD, NH3-TPD, ICP-AES and XPS. The maximum activity and high rates were obtained for all catalytic systems. At 50 minutes of the reaction the Ir/C catalyst achieved 93 % of conversion and exhibited the highest yield and selectivity of 92 % and 99 % respectively, to the desired product 5-(aminomethyl)-2-furanmethanol. The main properties that influence activity and selectivity are related to the amount of iridium on the surface and catalyst acidity. After the third cycle, 63 % and 59 % of selectivity and yield to AMFM respectively at 93 % of conversion were obtained.

Biocatalysis enables the scalable conversion of biobased furans into various furfurylamines

Biobased furans have emerged as chemical building blocks for the development of materials because of their diverse scaffolds and as they can be directly prepared from sugars. However, selective, efficient, and cost-effective scalable conversion of biobased furans remains elusive. Here, we report a robust transaminase (TA) from Shimia marina (SMTA) that enables the scalable amination of biobased furanaldehydes with high activity and broad substrate specificity. Crystallographic and mutagenesis analyses provide mechanistic insights and a structural basis for understanding SMTA, which enables a higher substrate conversion. The enzymatic cascade process established in this study allows one-pot synthesis of 2,5-bis(aminomethyl)furan (BAMF) and 5-(aminomethyl)furan-2-carboxylic acid from 5-hydroxymethylfurfural. The biosynthesis of various furfurylamines, including a one-pot cascade reaction for BAMF generation using whole cells, demonstrates their practical application in the pharmaceutical and polymer industries.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.

Catalytic Reductive Amination of Aromatic Aldehydes on Co-Containing Composites

The performance of a series of cobalt-based composites in catalytic amination of aromatic aldehydes by amines in the presence of hydrogen as well as hydrogenation of quinoline was studied. The composites were prepared by pyrolysis of CoII acetate, organic precursor (imidazole, 1,10-phenantroline, 1,2-diaminobenzene or melamine) deposited on aerosil (SiO2). These composites contained nanoparticles of metallic Co together with N-doped carboneous particles. Quantitative yields of the target amine in a reaction of p-methoxybenzaldehyde with n-butylamine were obtained at p(H2) = 150 bar, T = 150 °C for all composites. It was found that amination of p-methoxybenzaldehyde with n-butylamine and benzylamine at p(H2) = 100 bar, T = 100 °C led to the formation of the corresponding amines with the yields of 72–96%. In the case of diisopropylamine, amination did not occur, and p-methoxybenzyl alcohol was the sole or the major reaction product. Reaction of p-chlorobenzaldehyde with n-butylamine on the Co-containing composites at p(H2) = 100 bar, T = 100 °C resulted in the formation of N-butyl-N-p-chlorobenzylamine in 60–89% yields. Among the considered materials, the composite prepared by decomposition of CoII complex with 1,2-diaminobenzene on aerosil showed the highest yields of the target products and the best selectivity in all studied reactions.

Recent Catalytic Advances on the Sustainable Production of Primary Furanic Amines from the One-Pot Reductive Amination of 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (5-HMF) represents a well-known class of lignocellulosic biomass-derived platform molecules. With the presence of many reactive functional groups in the structure, this versatile building block could be valorized into many value-added products. Among well-established catalytic transformations in biorefinery, the reductive amination is of particular interest to provide valuable N-containing compounds. Specifically, the reductive amination of 5-HMF with ammonia (NH₃ ) and molecular hydrogen (H₂ ) offers a straightforward and sustainable access to primary furanic amines [i. e., 5-hydroxymethyl-2-furfuryl amine (HMFA) and 2,5-bis(aminomethyl)furan (BAMF)], which display far-reaching utilities in pharmaceutical, chemical, and polymer industries. In the presence of heterogeneous catalysts contanining monometals (Ni, Co, Ru, Pd, Pt, and Rh) or bimetals (Ni-Cu and Ni-Mn), this elegant pathway enables a high-yielding and chemoselective production of HMFA/BAMF compared to other synthetic routes. This Review aims to present an up-to-date highlight on the supported metal-catalyzed reductive amination of 5-HMF with elaborate studies on the role of metal, solid support, and reaction parameters. Besides, the recyclability/adaptability of catalysts as well as the reaction mechanism are also provided to give valuable insights into this potential 5-HMF valorization strategy.

Bio-based monomers for amide-containing sustainable polymers

The field of sustainable polymers from renewable feedstocks is a fast-reviving field after the decades-long domination of petroleum-based polymers. Amide-containing polymers exhibit a wide range of properties depending on the type of amide (primary, secondary, and tertiary), amide density, and other molecular structural parameters (co-existing groups, molecular weight, and topology). Engineering amide groups into sustainable polymers via the "monomer approach" is an industrially proven strategy, while bio-based monomers are of enormous importance to bridge the gap between renewable sources and amide-containing sustainable polymers (AmSPs). This feature article aims at conceptualizing the monomer-design philosophy behind most of the reported AmSPs and is organized by discussing di-functional monomers for step-growth polymerization, cyclic monomers for ring-opening polymerization and amide-containing monomers for chain-growth polymerization. We also give a perspective on AmSPs with respect to monomer design and performance enhancement.

Novel Challenges on the Catalytic Synthesis of 5-Hydroxymethylfurfural (HMF) from Real Feedstocks

The depletion of fossil resources makes the transition towards renewable ones more urgent. For this purpose, the synthesis of strategic platform-chemicals, such as 5-hydroxymethylfurfural (HMF), represents a fundamental challenge for the development of a feasible bio-refinery. HMF perfectly deals with this necessity, because it can be obtained from the hexose fraction of biomass. Thanks to its high reactivity, it can be exploited for the synthesis of renewable monomers, solvents, and bio-fuels. Sustainable HMF synthesis requires the use of waste biomasses, rather than model compounds such as monosaccharides or polysaccharides, making its production more economically advantageous from an industrial perspective. However, the production of HMF from real feedstocks generally suffers from scarce selectivity, due to their complex chemical composition and HMF instability. On this basis, different strategies have been adopted to maximize the HMF yield. Under this perspective, the properties of the catalytic system, as well as the choice of a suitable solvent and the addition of an eventual pretreatment of the biomass, represent key aspects of the optimization of HMF synthesis. On this basis, the present review summarizes and critically discusses the most recent and attractive strategies for HMF production from real feedstocks, focusing on the smartest catalytic systems and the overall sustainability of the adopted reaction conditions.

A Diamine-Oriented Biorefinery Concept Using Ammonia and Raney Ni as a Multifaceted Catalyst

Diamines are important industrial chemicals. In this paper we outline the feasibility of lignocellulose as a source of diol-containing molecules. We also illustrate the possibility of turning these diols into their diamines in good to excellent yields. Central to these transformations is the use of commercially available Raney Ni. For diol formation, the Raney Ni engages in hydrogenation and often also demethoxylation, that way funneling multiple components to one single molecule. For diamine formation, Raney Ni catalyzes hydrogen-borrowing mediated diamination in the presence of NH₃.

Significant Enhancement of 5-Hydroxymethylfural Productivity from D-Fructose with SG(SiO2) in Betaine:Glycerol–Water for Efficient Synthesis of Biobased 5-(Hydroxymethyl)furfurylamine

5-Hydroxymethyl-2-furfurylamine (5-HMFA) as an important 5-HMF derivative has been widely utilized in the manufacture of diuretics, antihypertensive drugs, preservatives and curing agents. In this work, an efficient chemoenzymatic route was constructed for producing 5-(hydroxymethyl)furfurylamine (5-HMFA) from biobased D-fructose in deep eutectic solvent Betaine:Glycerol–water. The introduction of Betaine:Glycerol could greatly promote the dehydration of D-fructose to 5-HMF and inhibit the secondary decomposition reactions of 5-HMF, compared with a single aqueous phase. D-Fructose (200 mM) could be catalyzed to 5-HMF (183.4 mM) at 91.7% yield by SG(SiO2) (3 wt%) after 90 min in Betaine:Glycerol (20 wt%), and at 150 °C. E. coli AT exhibited excellent bio-transamination activity to aminate 5-HMF into 5-HMFA at 35 °C and pH 7.5. After 24 h, D-fructose-derived 5-HMF (165.4 mM) was converted to 5-HMFA (155.7 mM) in 94.1% yield with D-Ala (D-Ala-to-5-HMF molar ratio 15:1) in Betaine:Glycerol (20 wt%) without removal of SG(SiO2), achieving a productivity of 0.61 g 5-HMFA/(g substrate D-fructose). Chemoenzymatic valorization of D-fructose with SG(SiO2) and E. coli AT was established for sustainable production of 5-HMFA, which has potential application.

Ambient-Temperature Reductive Amination of 5-Hydroxymethylfurfural Over Al2 O3 -Supported Carbon-Doped Nickel Catalyst

An efficient catalytic system for the conversion of 5-hydroxymethylfurfural (HMF) into N-containing compounds over low-cost non-noble-metal catalysts is preferable, but it is challenging to reach high conversion and selectivity under mild conditions. Herein, an Al₂ O₃ -supported carbon-doped Ni catalyst was obtained via the direct pyrolysis-reduction of a mixture of Ni₃ (BTC)₂  ⋅ 12H₂ O and Al₂ O₃ , generating stable Ni⁰ species due to the presence of carbon residue. A high yield of 96 % was observed in the reductive amination of HMF into 5-hydroxymethyl furfurylamine (HMFA) with ammonia and hydrogen at ambient temperature. The catalyst was recyclable and could be applied to the ambient-temperature synthesis of HMF-based secondary/tertiary amines and other biomass-derived amines from the carbonyl compounds. The significant performance was attributable to the synergistic effect of Ni⁰ species and acidic property of the support Al₂ O₃ , which promoted the selective ammonolysis of the imine intermediate while inhibiting the potential side reaction of over-hydrogenation.

Reductive Amination of 5-Hydroxymethylfurfural to 2,5-Bis(aminomethyl)furan over Alumina-Supported Ni-Based Catalytic Systems

Mono- and bimetallic Ni-based catalysts were prepared by screening 6 supports and 14 secondary metals for reductive amination of 5-hydroxymethylfurfural (5-HMF) into 2,5-bis(aminomethyl)furan (BAMF), among which γ-Al₂ O₃ and Mn were the best candidates. By further optimization of the reaction conditions at 0.4 g catalyst loading for 0.5 g substrate of 5-HMF and 160 °C of reaction temperature, 10Ni/γ-Al₂ O₃ and 10NiMn(4 : 1)/γ-Al₂ O₃ achieved the highest BAMF yields of 86.3 and 82.1 %, respectively. Although the BAMF yield values were comparable with that over Raney Ni, the turnover frequencies based on the initial BAMF yield and unit weight of Ni for 10NiMn(4 : 1)/γ-Al₂ O₃ , 10Ni/γ-Al₂ O₃ , and Raney Ni were calculated as 0.41, 0.09, and 0.04 h^-1 , respectively. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy showed that the existence of MnO_x well dispersed on the γ-Al₂ O₃ support and its electron transfer effect with Ni particles on the surface of the support contributed to the high efficiency and better recyclability for the five-time reused 10NiMn(4 : 1)/γ-Al₂ O₃ catalyst.

Recent Advances in Reductive Upgrading of 5-Hydroxymethylfurfural via Heterogeneous Thermocatalysis

The catalytic conversion of 5-hydroxymethylfufural (HMF), one of the vital platform chemicals in biomass upgrading, holds great promise for producing highly valuable chemicals through sustainable routes, thereby alleviating the dependence on fossil feedstocks and reducing CO₂ emissions. The reductive upgrading (hydrogenation, hydrogenolysis, ring-opening, ring-rearrangement, amination, etc.) of HMF has exhibited great potential to produce monomers, liquid fuel additives, and other valuable chemicals. Thermocatalytic conversion has a significant advantage over photocatalysis and electrocatalysis in productivity. In this Review, the recent achievements of thermo-reductive transformation of HMF to various chemicals using heterogeneous catalytic systems are presented, including the catalytic systems (catalyst and solvent), reaction conditions, (reaction temperature, pressure, etc.), and reaction mechanisms. The current challenges and future opportunities are discussed as well, aiming at guiding the catalyst design and practical scalable productions.

Insight into the dehydration of high-concentration fructose to 5-hydroxymethylfurfural in oxygen-containing polar aprotic solvents

A high 5-HMF yield of 85.4% was achieved in polar aprotic oxygen-containing solvent with strong electrophilic maleic acid by quenching DHH.