Vapochromic Platinum(II) Complexes: Crystal Engineering toward Intelligent Sensing Devices

Control of Pt···Pt interactions in Pt(II) complex crystals as luminescence sensors for the detection of external stimuli: recent achievements and perspectives

This review summarizes recent advances in the control of the luminescent chromic behavior of Pt(II) complex crystals, focusing on the design strategies of their molecular and packing structures. Square-planar Pt(II) complexes exhibit unique chromic luminescence owing to flexible Pt···Pt interactions, enabling their use as highly sensitive optical sensors to visualize external stimuli and environmental changes. However, the energy of the Pt···Pt interaction is relatively weak, making it difficult to precisely design and control the chromic luminescence based on the Pt···Pt interactions. This review discusses the challenging control of Pt···Pt interactions based on molecular assembly and presents design strategies using hydrogen bonding, halogen interactions, π-π stacking, and ion-pairing and counterion effects, with specific examples for each approach. Future research will focus on expanding analytical approaches, integrating these materials into sensing devices, and exploring synergies between chromic luminescence and other physical properties such as magnetism and conductivity. These advancements are expected to lead to innovative sensing technologies and significant breakthroughs in analytical chemistry and materials science.

Effect of the Substitution of the Mesityl Group with Other Bulky Substituents on the Luminescence Performance of [Pt(1,3-bis(4-Mesityl-pyridin-2-yl)-4,6-difluoro-benzene)Cl]

The synthesis and characterization of two new complexes, namely [Pt(bis(4-(4-(tert-butyl)phenyl)-pyridin-2-yl)-4,6-difluorobenzene)Cl] and [Pt(bis(4-(3,5-di-tert-butylphenyl)-pyridin-2-yl)-4,6-difluorobenzene)Cl], are reported. Both are highly luminescent in the blue region (Φlum = 0.89-0.95 at 478-480 nm), like the parent complex [Pt(1,3-bis(4-mesityl-pyridin-2-yl)-4,6-difluoro-benzene)Cl] in degassed diluted dichloromethane solution. An increase in concentration leads to the formation of bi-molecular emissive excited states, as evidenced by a growing structureless band that peaked at 690-697 nm. This formation is more facile for the complex with one tert-butyl group in para of the phenyl group. It appears that the introduction of two tert-butyls in positions 3 and 5 of the phenyl group hampers the neighboring of the monomeric species, although less efficiently than the introduction of methyls in positions 2 and 6.

Dynamic Luminescence Vapochromism of Pyridinium-Based Organic Salts

Organic vapochromic materials which undergo a drastic change in their photophysical properties upon exposure to vapors or gases are attracting growing scientific attention because of their low price and wide range of possible applications. In this work, luminescence vapochromism of carbazole-pyridinium-based organic salts with a general structure of (CzPy)X (CzPy+=2,3-di(9H-carbazol-9-yl)pyridinium ion; X=Cl, Br or I) is reported. It was found that (CzPy)X compounds form J-aggregates, which rearranged back to monomeric form upon exposure to methanol, ethanol, acetone, and water vapors. In contrast, acetonitrile was found to promote the J-aggregation in (CzPy)X compounds by occupying the voids in their crystal lattice and pushing cations closer together. It was further demonstrated that the efficiency of J-aggregation in (CzPy)X compounds depends on the size of the anion, which was employed to realize dynamic luminescence vapochromism, with vapochromic response times ranging from a couple of minutes in (CzPy)Cl to more than an hour in (CzPy)I. In addition, (CzPy)X compounds exhibited high melting points of about 250 °C and excellent thermal stability. (CzPy)Cl and (CzPy)Br have also shown good photoluminescence quantum yields at room temperature in a solid state.

Structural and Photophysical Differences in Crystalline Trigonal Planar Copper Iodide Complexes with 1,2-Bis(methylpyridin-2-yl)disilane Ligands

We synthesized trigonal planar Cu(I) iodide complexes with 1,2-bis(methylpyridin-2-yl)disilane ligands L1-L4 and investigated how the substitution position of the methyl group on the pyridine ring in σ-π conjugation affects their structure and physical properties. The structures were characterized by NMR, elemental analysis, and single-crystal X-ray diffraction. In the crystalline state, the methylpyridyl groups of CuIL1-CuIL3 were coordinated with Cu(I) in an anticlinal conformation relative to the Si-Si σ bond, whereas those of CuIL4 were coordinated with Cu(I) in a synperiplanar conformation relative to the Si-Si σ bond. The conformational difference in the crystalline state was influenced by the N-Cu-N bite angle and the emission wavelength. CuIL1-CuIL3 exhibited blue-green emission (λem: 476-494 nm), and CuIL4 exhibited green-yellow emission (λem: 512 nm) with high emission quantum yields (Φ: 0.59-0.86) in the crystalline state at 293 K. These Cu(I) complexes exhibited thermally activated delayed fluorescence from the S1 state at 293 K and phosphorescence from the T1 state at 77 K in the crystalline state. The optical properties in the crystalline state were discussed by DFT and TD-DFT calculations. These complexes also displayed aggregation-induced emission in THF-water solution (fw > 80%), although they did not show emission in dehydrated THF.

Thermo-responsive emission induced by different delocalized excited-states in isomorphous Pd(ii) and Pt(ii) one-dimensional chains

The self-assembly of d8 transition metal complexes is essential for the development of optoelectronic and sensing materials with superior photofunctional properties. However, detailed insight into the electronic delocalization of excited states across multiple molecules, particularly in comparing 5d8 (Pt(ii)) and 4d8 (Pd(ii)) systems, remains ambiguous but important. In this study, we have successfully evaluated the differences in the excited-state delocalization and thermal responses of self-assembled Pt(ii) and Pd(ii) complexes. Although the complexes presented herein, K[M(CN)2(dFppy)]·H2O (M = Pt or Pd, dFppy = 2-(4,6-difluorophenyl)pyridinate), are crystallographically isomorphous with similarly short metal⋯metal contacts, only the Pt(ii) complex exhibited thermal equilibria between delocalized excited states, resulting in a drastic thermochromic luminescence with a red-shift of greater than 100 nm. In contrast, the dimeric localized emission from the Pd(ii) complex showed a significant increase in the quantum yield upon cooling, approaching almost unity.

Exploring structural and optical properties of a new series of soft salts based on cyclometalated platinum complexes

A series of nine new soft salts based on two platinum(II) complexes, namely ([Pt(C^N)(CN)2]-[Pt(C^N)(en)]+) (en = ethane-1,2-diamine), has been developed and synthesized. Their photophysical properties in both solution and the solid state were described. All soft salt complexes exhibit phosphorescence emission with PLQY in the solid state up to 0.36. Most of these materials displayed aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) in water/DMSO solutions as the water ratio increased. Structure-property relationships were analyzed in relation to emission properties. The presence of the free nitrogen atoms in soft salt complexes with a C^N pyrimidine-based ligand allowed for reversible sensitivity to acidic vapors, resulting in the quenching of phosphorescence emission. Additionally, for selected soft salts, we described reversible vapochromism behaviour, making these new materials interesting for multi-detection purposes in anti-counterfeiting applications.

Inducing Platinophilic Interactions in [Pt(SCN)4]2- Salts by Cation Tuning

A series of simple [Pt(SCN)4]2- salts with a variety of cations was synthesized and characterized using X-ray crystallography to determine factors that could induce platinophilic interactions between [Pt(SCN)4]2- anions, including cation size and shape, charge, and ability to participate in hydrogen bonding. The salts [N(PPh3)2]2[Pt(SCN)4], [AsPh4]2[Pt(SCN)4], and [Co(1,10-phenanthroline)3][Pt(SCN)4] feature bulky, noncoordinating cations where the [Pt(SCN)4]2- anions are completely separated from each other, with no Pt-Pt interactions present. Salts containing the hydrogen-bonding cations [Co(NH3)6]2[Pt(SCN)4]3 and [Co(en)3]2[Pt(SCN)4]3 (en = 1,2-ethylenediamine) display close Pt-Pt distances, with both compounds exhibiting platinophilic interactions with distances of 3.373(2) and 3.539(8) Å, respectively, the first reported platinophilic interactions with the [Pt(SCN)4]2- unit. [Co(en)3]2[Pt(SCN)4]3 also presents intermolecular chalcogen S···S and Pt···S interactions, resulting in increased dimensionality while also assisting in assembling the platinophilic interaction. The compounds are emissive at 77 K in the solid state, exhibiting a d-d metal-centered transition regardless of whether or not any platinophilic interactions are present. Overall, hydrogen-bonding cations are most likely to promote close proximity of the Pt(II) metal centers and induce the formation of platinophilic interactions in [Pt(SCN)4]2-.

Ladder-like heteropolynuclear assemblies via cyanido bridges and platinum(II)-thallium(I) bonds: structural and photophysical properties

We describe the mononuclear anionic cyanido-pentafluorophenyl complexes, (NBu4)[Pt(C^N)(C6F5)(CN)] [C^N = 7,8-benzoquinolate (bzq) 1, 2-(2,4-difluorophenyl)pyridinate (dfppy) 2] and the heteropolynuclear derivatives [{Pt(C^N)(C6F5)(CN)}Tl] (C^N = bzq 3, dfppy 4). These complexes were synthesized via a two-step modular synthesis by reaction of the corresponding potassium salts K[Pt(C^N)(C6F5)(CN)], prepared in situ from [Pt(C^N)(C6F5)(DMSO)] and KCN in acetone/H2O, with TlPF6. The structures of {[Pt(bzq)(C6F5)(CN)Tl]·THF}n (3·THF)n and [{Pt(dfppy)(C6F5)(CN)}Tl]4·dioxane [4]4·dioxane, determined by X-ray crystallography, confirm the presence of Pt(II)-Tl(I) bonds [2.9795(6)-3.0736(3) Å], but in the dfppy complex, the incorporation of dioxane, causes a significant structural change. Thus, whereas [3·THF]n achieves a bent-ladder shape extended double chain Tl⋯[Pt⋯Tl]n⋯Pt supported by lateral bridging [Pt](μ-CN)[Tl] ligands, [4]4·dioxane is formed by discrete Pt4Tl4 rectangular aggregates stabilized by [Pt](μ-CN)[Tl] and Pt⋯Tl bonds, which are connected by dioxane bridging molecules through Tl⋯O(dioxane) additional contacts. Solid state emissions are redshifted compared with the mononuclear derivatives 1 and 2 and have been assigned, with the support of theoretical calculations on Pt4Tl4 models, to metal-metal'-to-ligand charge transfer (3MM'LCT [d/s σ*(Pt, Tl) → π*(C^N)]) for 3 and mixed 3MM'LCT/3IL for 4. In fluid THF solution, the complexes are not emissive. At 77 K, 3 and 4 exhibit bright emissions attributed to the formation of bimetallic [{Pt(C^N)(C6F5)(CN)}Tl(THF)x], and anionic [Pt(C^N)(C6F5)(CN)]- fragments. Furthermore, both 3 and 4 exhibit a reversible mechanochromism with a red shift of the emissions upon crushing, suggesting some degree of shortening of metal-metal separation. Finally, complex 3 shows solvatochromic behavior with color/luminescence changes by treatment with a drop of MeOH, CH2Cl2, THF or Et2O, with shifts from 583 in 3-MeOH to 639 nm in 3-THF. However, 4 only demonstrates a bathochromic response to MeOH.

Cyanido-bridged diplatinum(ii) complexes: ligand and solvent effect on aggregation and luminescence

The association of platinum(ii)-based luminophores, which is caused by metal⋯metal and π-π stacking interactions, has been actively exploited in supramolecular construction of photofunctional molecular materials. Herein, we describe a series of bimetallic complexes [{Pt(C^N^/*N)}2(CN)][BAr4F], containing cyanido-bridged cyclometalated Pt(ii) chromophore fragments (HC^N^N = 6-phenyl-2,2'-bipyridine, (benzyltriazolyl)-phenylpyridine, and pyrazolyl-phenylpyridine; HC^N*N = N-pentyl-6-phenyl-N-(pyridin-2-yl)pyridin-2-amine; ^/* denote five/six-membered metallocycles). These compounds are intensely phosphorescent at room temperature showing quantum yields up to 0.73 in solution and 0.62 in the solid state, which are generally higher than those of the mononuclear relatives [Pt(C^N^/*N)(CN)]. The complex cations bearing sterically unhindered -C^N^N ligands readily assemble in solution, reaching the tetrameric species [{Pt(C^N^N)}2(CN)]44+ as suggested by diffusion NMR spectroscopy. The size of the aggregates can be regulated by the concentration, temperature, and polarity of the solvent that allows to alter the emission from green to near-IR. In the solid state, the maximum of low-energy luminescence is shifted up to 912 nm. The results show that photophysical properties of discrete complexes and the intermolecular aggregation can be substantially enhanced by utilizing the rigid bimetallic units giving rise to novel dynamic light emitting Pt(ii) systems.

Advanced Soft Porous Organic Crystal with Multiple Gas-Induced Single-Crystal-to-Single-Crystal Transformations for Highly Selective Separation of Propylene and Propane

Soft porous organic crystals with stimuli-responsive single-crystal-to-single-crystal (SCSC) transformations are important tools for unraveling their structural transformations at the molecular level, which is of crucial importance for the rapid development of stimuli-responsive systems. Carefully balancing the crystallinity and flexibility of materials is the prerequisite to construct advanced organic crystals with SCSC, which remains challenging. Herein, a squaraine-based soft porous organic crystal (SPOC-SQ) with multiple gas-induced SCSC transformations and temperature-regulated gate-opening adsorption of various C1-C3 hydrocarbons is reported. SPOC-SQ is featured with both crystallinity and flexibility, which enable pertaining the single crystallinity of the purely organic framework during accommodating gas molecules and directly unveiling gas-framework interplays by SCXRD technique. Thanks to the excellent softness of SPOC-SQ crystals, multiple metastable single crystals are obtained after gas removals, which demonstrates a molecular-scale shape-memory effect. Benefiting from the single crystallinity, the molecule-level structural evolutions of the SPOC-SQ crystal framework during gas departure are uncovered. With the unique temperature-dependent gate-opening structural transformations, SPOC-SQ exhibits distinctly different absorption behaviors towards C3 H6 and C3 H8 , and highly efficient and selective separation of C3 H6 /C3 H8 (v/v, 50/50) is achieved at 273 K. Such advanced soft porous organic crystals are of both theoretical values and practical implications.

Responsive macrocyclic and supramolecular structures powered by platinum

Humankind's manipulation of platinum dates back more than two millennia to burial objects. Since then, its use has evolved from purely decorative purposes in jewelry to more functional applications such as in catalysts, pharmaceuticals, and bioimaging agents. Platinum offers a range of properties arguably unmatched by any other metal, including electroactivity, photoluminescence, chromic behaviour, catalysis, redox reactivity, photoreactivity, and stimuli-controlled intermetallic interactions. The vast body of knowledge generated by the exploration of these and other properties of platinum has recently merged with other areas of chemistry such as supramolecular and host-guest chemistry. This has shown us that platinum can incorporate its responsive character into supramolecular assemblies (e.g., macrocycles and polymers) to produce materials with tailorable functions and responses. In this Perspective Article, we cover some platinum-powered supramolecular structures reported by us and others, hoping to inspire new and exciting discoveries in the field.

Luminescent Platinum(II) Complexes with Terdentate N∧C∧C Ligands

The synthesis, structure, and luminescence of Pt(II) complexes of the type [Pt(N∧C∧C)(L)] are reported, where N∧C∧C is a terdentate ligand resulting from the cycloplatination of 2-(3,5-diphenoxyphenyl)pyridine or 2-(4,4″-dimethyl-[1,1':3',1″-terphenyl]-5'-yl)pyridine, and L represents a monodentate ancillary ligand, which can be γ-picoline, 4-pyridinecarboxaldehyde, PPh3, n-butyl or 2,6-dimethylphenyl isocyanide, CO, or the N-heterocyclic carbenes 1-butyl-3-methylimidazol-2-ylidene or 4-butyl-3-methyl-1-phenyl-1H-1,2,3-triazol-5-ylidene. Derivatives bearing CO, isocyanides, or carbenes showed the highest stabilities in solution, whereas the pyridine and PPh3 derivatives establish ligand-exchange equilibria in acetonitrile. Different supramolecular structures are observed in the solid state, which largely depend on the nature of the ancillary ligand. Isocyanides and CO favor π interactions between the aromatic rings, metallophilic Pt···Pt contacts, or a combination of both. In contrast, pyridine ligands may lead to bimolecular assemblies driven by C-H···O, C-H···Pt, or C-H/π hydrogen bonds. Luminescence was examined in fluid solution, poly(methyl methacrylate) matrices, and the solid state at 298 K, and in 2-methyltetrahydrofuran glasses at 77 K. The majority of derivatives show highly efficient emissions from 3ILCT/MLCT or 3ILCT/MLCT/LLCT excited states of monomeric species. The formation of excimers and different types of emissive aggregates are demonstrated, which lead to red-shifted emissions of different origins and characteristics depending on the involved noncovalent interactions.

Nickel(II) Analogues of Phosphorescent Platinum(II) Complexes with Picosecond Excited-State Decay

Square-planar NiII complexes are interesting as cheaper and more sustainable alternatives to PtII luminophores widely used in lighting and photocatalysis. We investigated the excited-state behavior of two NiII complexes, which are isostructural with two luminescent PtII complexes. The initially excited singlet metal-to-ligand charge transfer (1 MLCT) excited states in the NiII complexes decay to metal-centered (3 MC) excited states within less than 1 picosecond, followed by non-radiative relaxation of the 3 MC states to the electronic ground state within 9-21 ps. This contrasts with the population of an emissive triplet ligand-centered (3 LC) excited state upon excitation of the PtII analogues. Structural distortions of the NiII complexes are responsible for this discrepant behavior and lead to dark 3 MC states far lower in energy than the luminescent 3 LC states of PtII compounds. Our findings suggest that if these structural distortions could be restricted by more rigid coordination environments and stronger ligand fields, the excited-state relaxation in four-coordinate NiII complexes could be decelerated such that luminescent 3 LC or 3 MLCT excited states become accessible. These insights are relevant to make NiII fit for photophysical and photochemical applications that relied on PtII until now.

Pt(II) Complexes with Tetradentate C^N*N^C Luminophores: From Supramolecular Interactions to Temperature-Sensing Materials with Memory and Optical Readouts

A series of four regioisomeric Pt(II) complexes (PtLa-n and PtLb-n) bearing tetradentate luminophores as dianionic ligands were synthesized. Hence, both classes of cyclometallating chelators were decorated with three n-hexyl (n = 6) or n-dodecyl (n = 12) chains. The new compounds were unambiguously characterized by means of multiple NMR spectroscopies and mass spectrometry. Steady-state and time-resolved photoluminescence spectroscopy as well quantum chemical calculations show that the effect of the regioisomerism on the emission colour and on the deactivation rate constants can be correlated with the participation of the Pt atom on the excited state. The thermal properties of the complexes were studied by DSC, POM and temperature-dependent steady-state photoluminescence spectroscopy. Three of the four complexes (PtLa-12, PtLb-6 and PtLb-12) present an intriguing thermochromism resulting from the responsive metal-metal interactions involving adjacent monomeric units. Each material has different transition temperatures and memory capabilities, which can be tuned at the intermolecular level. Hence, dipole-dipole interactions between the luminophores and disruption of the crystalline packing by the alkyl groups are responsible for the final properties of the resulting materials.

Luminescence Color and Intensity Changes of Nitridorhenium(V) Complexes Induced by Protonation/Deprotonation on the Bidentate Azolylpyridine Ligands

Tricyanidonitridorhenium(V) complexes with azolylpyridines, namely, [ReN(CN)3(H-N2py)]- (1-H, H-N2py = 2-(3-pyrazolyl)pyridine) and [ReN(CN)3(L)]2- (2-a, L = 2-[1,2,3]-triazol-4-yl-pyridine anion (N3py-), and 3-a, that is, L = 2-(tetrazol-5-yl)-pyridine anion (N4py-)), were newly synthesized and characterized. The structures of the new complexes were determined by single-crystal X-ray analysis. The 1-H complex includes two geometrical isomers in which an isomer is the conformation with the pyridyl (py) and pyrazolyl (pyrz) moieties of H-N2py occupying the trans site to the nitrido (the ax site) and the trans site to the cyanido (the eq site), respectively, in a bidentate fashion; the other isomer is the py and pyrz moieties coordinated to the eq and ax sites. In 2-a and 3-a, the triazolyl (trz) and tetrazoly (tetrz) moieties in N3py- and N4py- occupy the eq site, and the py moieties in N3py- and N4py- coordinate to the ax site. The complex 1-H is deprotonated upon the addition of 1,8-diazabicyclo[5.4.0]undec-7-one or NaOH to produce [ReN(CN)3(N2py)]2- (1-a), and 2-a is protonated upon the addition of p-toluene sulfonic acid (TsOH) to give [ReN(CN)3(H-N3py)]- (2-H) in DMSO. The protonation reaction does not occur for 3-a with TsOH in DMSO. All the complexes show one-electron redox waves of the Re(VI)/Re(V) and azolylpyridine ligand-centered processes in 0.1 M (n-C4H9)4NPF6-DMSO. All the complexes exhibit photoluminescence in DMSO and in the crystalline phase at 296 K. The emissive excited states of the complexes in DMSO were assigned to MLCT with a spin triplet nature. The emission band shifts to shorter and longer wavelengths upon protonation and deprotonation of the coordinated azolylpyridines, respectively. The emission color and intensity changes of 2-H and 2-a in the presence of acidic and basic vapors were investigated.

Vapor-Induced Assembly of a Platinum(II) Complex Loaded on Layered Double Hydroxide Nanoparticles

Controlled self-assembly of PtII complexes is key to the development of optical and stimuli-responsive materials, but designing and precisely controlling them is still difficult owing to weak intermolecular interactions. Herein, we report the successful water-vapor-induced assembly of an anionic PtII complex [Pt(CN)2 (ppy)]- (Hppy=2-phenylpyridine) electrostatically loaded onto cationically charged layered double hydroxide (LDH) nanoparticles consisting of Mg2+ and Al3+ ions. When the PtII complexes were densely loaded onto the LDH nanoparticles, the assembly was maintained, even in dilute aqueous media. In the case of sparse loading, the PtII complexes were loaded discretely in the dry state; however, when water vapor was adsorbed, the increased mobility of the PtII complexes led to their assembly on the LDH nanoparticles. The presence of water vapor led to a drastic change in luminescence from green to orange.

Structural modifications to platinum(II) pincer complexes resulting in changes in their vapochromic and solvatochromic properties

There is a need to develop rapidly responsive chemical sensors for the detection of low concentrations of volatile organic solvents (VOCs). Platinum pincer complexes have shown promise as sensors because of their colours and vapochromic and solvatochromic properties, that may be related to the non-covalent interactions between the pincer complexes and the guest VOCs. Here we report an investigation into a series of Pt(II) complexes based on the 1,3-di(pyridine)benzene tridentate (N⁁C⁁N) skeleton with the formula [Pt(N⁁C(R)⁁N)(CN)] (R = C(O)Me 2, C(O)OEt 3, C(O)OPh 4) with the fourth coordination site occupied by a cyanide ligand. Solid-state samples of the complexes have been tested with a range of volatiles including methanol, ethanol, acetone, dichloromethane and water, and while 2 displays thermochromism, 3 and 4 display rapidly reversible vapochromism and solvatochromism. These results are correlated with X-ray powder and single crystal X-ray structural data including an assessment of the crystal packing and the void space in the crystalline space. The cyanide ligand and the R substituents are involved in hydrogen bonding that creates the voids within the structures and interact with the solvent molecules that influence the Pt⋯Pt separation in the crystalline state.

cis/trans-[Pt(C∧N)(C≡CR)(CNBut)] Isomers: Synthesis, Photophysical, DFT Studies, and Chemosensory Behavior

cis/trans Isomerism can be a crucial factor for photophysical properties. Here, we report the synthesis and optical properties of a series of trans- and cis-alkynyl/isocyanide cycloplatinated compounds [Pt(C^∧N)(C≡CR)(CNBu^t)] [R = C₆H₄-4-OMe 1, 3-C₄H₃S 2; C^∧N = 2-(2,4-difluorophenyl)pyridine (dfppy) (a), 4-(2-pyridyl)benzaldehyde (ppy-CHO) (b)]. The trans-forms do not isomerize thermally in MeCN solution to the cis forms, but upon photochemical irradiation in this medium at 298 K, a variable isomerization to the cis forms was observed. This behavior is in good agreement with the theoretically calculated energy values. The trans/cis configuration, the identity of the cyclometalated, and the alkynyl ligand influence on the absorption and emission properties of the complexes in solution, polystyrene (PS) films, and solid state are reported. All complexes are efficient triplet emitters in all media (except for trans-1a and trans-2a in CH₂Cl₂ solution at 298 K), with emission wavelengths depending mainly on the cyclometalated ligand in the region 473-490 nm (dfppy), 510-550 (ppy-CHO), and quantum yields (ϕ) ranging from 18.5 to 40.7% in PS films. The combined photophysical data and time-dependent density functional theory calculations (TD-DFT) at the excited-state T₁ geometry reveal triplet excited states of ³L'LCT (C≡CR → C^∧N)/³IL (C^∧N) character with minor ³MLCT contribution. The dfppy (a) complexes show a greater tendency to aggregate in rigid media than the ppy-CHO (b) and the cis with respect to the trans, showing red-shifted structureless bands of ³MMLCT and/or excimer-like nature. Interestingly, trans-1a,2a and cis-1a,2a undergo significant changes in the ultraviolet (UV) and emission spectra with Hg²⁺ ions enabling their use for sensing of Hg²⁺ ions in solution. This is clearly shown by the hypsochromic shift and substantial decrease of the low-energy absorption band and an increase of the intensity of the emission in the MeCN solution upon the addition of a solution of Hg(ClO₄)₂ (1:5 molar ratio). Job's plot analysis estimated a 1:1 stoichiometry in the complexation mode of Hg²⁺ by trans-2a. The binding constant (log K) calculated for this system from absorption titration data resulted to be 2.56, and the limit of the detection (LOD) was 6.54 × 10^-7 M.

Elastic and bright assembly-induced luminescent crystals of platinum(II) complexes with near-unity emission quantum yield

Molecular crystals of Pt(II) complexes with metallophilic interactions can provide bright assembly-induced luminescence with colour tunability. However, the brittleness of many of these crystals makes their application in flexible optical materials difficult. Herein, we have achieved the elastic deformation of crystals of polyhalogenated Pt(II) complexes exhibiting bright assembly-induced luminescence. A crystal of [Pt(bpic)(dFppy)] (Hbpic = 5-bromopicolinic acid, HdFppy = 2-(2,4-difluorophenyl)pyridine) and a co-crystal of [Pt(bpic)(dFppy)] and [Pt(bpic)(ppy)] (Hppy = 2-phenylpyridine) were found to exhibit significant elastic deformation due to their highly anisotropic interaction topologies. While the crystal of [Pt(bpic)(dFppy)] exhibited monomer-based ligand-centred ³ππ* emission with an emission quantum yield of 0.40, the co-crystal exhibited bright, triplet metal-metal-to-ligand charge transfer (³MMLCT) emission owing to Pt⋯Pt interactions, thereby achieving a significantly higher emission quantum yield of 0.94.

Organometallic Platinum(II) Photosensitisers that Demonstrate Ligand-Modulated Triplet-Triplet Annihilation Energy Upconversion Efficiencies

A series of 2-phenylquinoxaline ligands have been synthesised that introduce either CF3 or OCF3 electron-withdrawing groups at different positions of the phenyl ring. These ligands were investigated as cyclometalating reagents for platinum(II) to give neutral complexes of the form [Pt(C^N)(acac)] (in which C^N=cyclometalating ligand; acac=acetyl acetonate). X-ray crystallographic studies on three examples showed that the complexes adopt an approximate square planar geometry. All examples revealed strong Pt-Pt linear contacts of 3.2041(6), 3.2199(3) and 3.2586(2) Å. The highly coloured complexes display efficient visible absorption at 400-500 nm (ϵ ≈5000 M-1  cm-1 ) and orange red photoluminescent characteristics (λem =603-620 nm; Φem ≤37 %), which were subtly tuned by the ligand. Triplet emitting character was confirmed by microsecond luminescence lifetimes and the photogeneration of singlet oxygen with quantum efficiencies up to 57 %. Each complex was investigated as a photosensitiser for triplet-triplet annihilation energy upconversion using 9,10-diphenylanthracene as the annihilator species: a range of good upconversion efficiencies (ΦUC 5.9-14.1 %) were observed and shown to be strongly influenced by the ligand structure in each case.

Polymorphism and Mechanochromism in 2-Phenylbenzothiazole Cyclometalated PtII Complexes with Chelating N∧O Ligands

New cyclometalated Pt^II complexes with 2-phenylbenzothiazole (pbt) and two different picolinate ligands [Pt(pbt)(R-pic-κN,O)] (R = H (1), OH (2)) were prepared. In contrast to 1, the OH substituent group on 2 allows modulation of the packing in the solid state through donor-acceptor H-bonding interactions with the CH₂Cl₂ solvent. Thus, three pseudopolymorphs of 2 with different aggregation degrees were isolated, including yellow 2-Y, orange-red 2-R (2·0.5CH₂Cl₂) and black 2-B (2·0.75CH₂Cl₂) with emissions at 540, 656, and 740 nm, respectively, in the solid state at 298 K. 2-R and 2-B can be transformed to the pristine solid 2. Studies of their crystal structures show that 1 and 2-Y stack in columns with only π···π stacking interactions, whereas 2-R displays strong aggregated 1D infinite chains based on Pt···Pt and π···π stacking interactions, consistent with the colors and the photophysical properties, measured in several media. Interestingly, 1 and 2 exhibit reversible mechanochromic behavior with high contrast in the color and color emission upon mechanical grinding due to a phase transition between a crystalline and an amorphous state, as confirmed by powder X-ray diffraction (PXRD) studies. Theoretical calculations indicate that Pt···Pt contacts are more relevant in the trimers and tetramers than in the dimers, particularly in their T₁ states, associated with a change from a ³IL/³MLCT transition in the monomer to ³MM(L+L')CT in the oligomers. Noncovalent interaction (NCI) theoretical studies indicate that the π···π stacking among chelates also exerts a strong influence in the metal-metal-to-ligand charge transfer transition character.

Room-temperature luminescence from Pd(II) and Pt(II) complexes: from mechanochromic crystals to flexible polymer matrices

A series of Pd(II) (PdLOMe, PdLOHex) and Pt(II) (PtLOMe, PtLOHex) complexes bearing tetradentate ligands as dianionic luminophores were synthesized. Hence, the cyclometallating chelators were alternatively decorated with two n-hexyloxy (LOHex) or two methoxy (LOMe) moieties to promote crystallization and processability. The new compounds were unambiguously characterized by means of multiple NMR spectroscopies and mass spectrometry as well as by single crystal X-ray diffractometric analysis (PtLOMe and PdLOMe). Steady state and time-resolved photoluminescence spectroscopic studies were carried out in crystalline phases, in fluid solutions at room temperature, in frozen glassy matrices at 77 K and in a flexible polymeric matrix (PMMA). PtLOMe presents an intriguing mechanochromism resulting from the responsive metal-metal interactions involving adjacent monomeric units. Incorporation of the Pd(II) complexes into the polymeric matrix boosts their photophysical properties by stiffening of the coordination environment while reducing non-radiative deactivation pathways mediated by dissociative metal-centred states, which also become thermally inaccessible at 77 K.

Multistimuli-Responsive Properties of Aggregated Isocyanide Cycloplatinated(II) Complexes

Here, we describe the neutral cyclometalated tert-butylisocyanide Pt^II complexes, [Pt(C^∧N)Cl(CNBu^t)] 1, the double salts [Pt(C^∧N)(CNBu^t)₂][Pt(C^∧N)Cl₂] 2, and the cationic complexes [Pt(C^∧N)(CNBu^t)₂]ClO₄ 3 [C∧N = difluorophenylpyridine (dfppy, a), 4-(2-pyridyl)benzaldehyde (ppy-CHO, b)]. A comparative study of the pseudopolymorphs 1a, 1a·CHCl₃, 1b, 1b·0.5Toluene, 1b·0.5PhF, and 3a·0.25CH₂Cl₂ reveals strong aggregation through Pt···Pt and/or π···π stacking interactions to give a variety of distinctive one-dimensional (1D) infinite chains, which modulate the photoluminescent properties. This intermolecular long-range aggregate formation is the main origin of the photoluminescent behavior of 1a and 1b complexes, which exhibit highly sensitive and reversible responses to multiple external stimuli including different volatile organic compounds (VOCs), solvents, temperatures, and pressures, with distinct color and phosphorescent color switching from green to red. Furthermore, complex 1b undergoes supramolecular self-assembly via Pt···Pt and/or π···π interactions into a polymer thin polystyrene (PS) film 10 wt % in response to toluene vapors, and 3a exhibits vapochromic and vapoluminescent behavior. Theoretical simulations on the dimer, trimer, and tetramer models of 1a and 1b have been carried out to get insight into the photophysical properties in the aggregated solid state.

Spectroscopic Tracking of Salicylideneaniline Photocolored Crystals: An Attempt to Quantify Polymorph-Dependent Features toward Precise Structure-Function Correlation Analysis

Three polymorphs of salicylideneaniline (SA) were prepared, and their photochromic behavior was examined using a recently developed single-crystal microscopic UV-vis spectroscopy approach. This system enabled us to acquire absorption data during the bleaching process as a function of temperature and visible light intensity. First, we demonstrated that, in contrast to the generally accepted assumption, the bleaching curves were notably influenced by the degree of photosaturation at the initial stage. By modifying our kinetic model to include the term representing the initial degree of photosaturation, we successfully obtained the kinetic parameters intrinsic to each crystal structure. Second, we further analyzed the kinetic parameters to show that the bleaching process was accelerated by visible light irradiation to a significantly higher degree than by thermal relaxation. The two bleaching-prompting effects were quantitatively compared between two photochromic polymorphs, α₁ and α₂; the long life of the photoproduct in α₂ was attributed to efficient self-shielding from visible light irradiation enabled by its structural features. These results prompted us to reexamine the simple dualistic photochemical and thermal classification of photochromic systems and will provide a foundation for the precise structure-function analysis of crystalline materials, including SAs.

Synthesis and In Vitro Studies of Photoactivatable Semisquaraine-type Pt(II) Complexes

The synthesis, full characterization, photochemical properties, and cytotoxic activity toward cisplatin-resistant cancer cell lines of new semisquaraine-type Pt(II) complexes are presented. The synthesis of eight semisquaraine-type ligands has been carried out by means of an innovative, straightforward methodology. A thorough structural NMR and X-ray diffraction analysis of the new ligands and complexes has been done. Density functional theory calculations have allowed to assign the trans configuration of the platinum center. Through the structural modification of the ligands, it has been possible to synthesize some complexes, which have turned out to be photoactive at wavelengths that allow their activation in cell cultures and, importantly, two of them show remarkable solubility in biological media. Photodegradation processes have been studied in depth, including the structural identification of photoproducts, thus justifying the changes observed after irradiation. From biological assessment, complexes C7 and C8 have been demonstrated to behave as promising photoactivatable compounds in the assayed cancer cell lines. Upon photoactivation, both complexes are capable of inducing a higher cytotoxic effect on the tested cells compared with nonphotoactivated compounds. Among the observed results, it is remarkable to note that C7 showed a PI > 50 in HeLa cells, and C8 showed a PI > 40 in A2780 cells, being also effective over cisplatin-resistant A2780cis cells (PI = 7 and PI = 4, respectively). The mechanism of action of these complexes has been studied, revealing that these photoactivated platinum complexes would actually present a combined mode of action, a therapeutically potential advantage.

The synthesis, full characterization, photochemical properties, and cytotoxic activity toward cisplatin-resistant cancer cell lines of new semisquaraine-type Pt(II) complexes are presented. Eight semisquaraine-type ligands and their corresponding Pt(II) complexes have been studied. These complexes have turned out to be photoactive at wavelengths that allow their activation in cell cultures. Two of them display remarkable solubility in biological media showing a promising behavior as photoactivatable compounds against several cancer cell lines.

Reversible colour/luminescence colour changes of tetracyanoruthenium(II) complexes by sorption/desorption of water molecules in crystals

We report colour/luminescence colour changes of M[Ru(bpy)(CN)₄] crystal (M²⁺ = Ca²⁺, Sr²⁺, and Ba²⁺; bpy = 2,2'-bipyridine). The X-ray crystallographic study revealed that the crystals are constructed from linear-chains of {[Ru(bpy)(CN)₄][Ca(H₂O)₅]}_n, {[Ru(bpy)(CN)₄][Sr(H₂O)₆]}_n, and {[Ru(bpy)(CN)₄]₂[Ba(H₂O)₅]₂(μ-H₂O)₂}_n, respectively. Ru(II) complex linear chains and the hydrophilic channels composed of M²⁺ ion and water along them enable reversible water sorption/desorption without collapse of crystals responsible for the colour change. The emission spectra of Ca²⁺ and Sr²⁺ salts are remarkably shifted to the red side when the temperature was increased from 296 to 500 K, while Ba²⁺ salt shows a slight shift in the emission spectrum during the heating. The change in the interaction of M²⁺ ion to the equatorial CN ligand depending on the number of hydrated water molecules effectively contributes to the luminescence colour change for Ca²⁺ and Sr²⁺ salts. FT-IR spectra after heating at 473 K show the high-frequency shifts in the CN stretching mode for Sr²⁺ salt, while no remarkable peak shifts are observed for Ca²⁺ and Ba²⁺ salts. Thermogravimetry results indicate that heating over 470 K leads to the desorption of 5H₂O from all salts, resulting in {[Ru(bpy)(CN)₄][Ca]}_n, {[Ru(bpy)(CN)₄][Sr(H₂O)]}_n, and {[Ru(bpy)(CN)₄]₂[Ba]₂(μ-H₂O)₂}_n for linear chains. The change in the hydration structure for M²⁺ ions regulates the shift of CN stretching modes.

Vapochromism of iridium(III) bis-terpyridine complex based on modulation of halide-to-ligand charge transfer transition

We report, for the first time, a color change originating from the shift of halide-to-ligand charge transfer (XLCT) band of Ir(III) bis-terpyridine complex crystal in a response to sorption/desorption of...

Water's Role in Polymorphic Platinum(II) Complexes

Solvent plays a vital role in the recrystallization process and resulting crystallinity of materials. This role is of such importance that it can control the stability and utility of materials. In this work, the inclusion of a solvent in the crystalline lattice, specifically water, drastically affects the overall stability of two platinum polymorphs. [Pt(tpy)Cl]BF₄ (tpy = 2,2';6'2″-terpyridine) crystallizes in three forms, red (1R) and blue (1B) polymorphs and a yellow nonsolvated form (2). 1R is the more stable of the two polymorphs, whereas 1B loses crystallinity upon dehydration at ambient conditions resulting in the formation of 2. Close examination of the solid-state extended structures of the two polymorphs reveals that 1R has a lattice arrangement that is more conducive to stronger intermolecular interactions compared to 1B, thereby promoting greater stability. In addition, these two polymorphs exhibit unique vapochromic responses when exposed to various solvents.

Coordination-based vapochromic behavior of a luminescent Pt(ii) complex with potassium ions

Vapochromic Pt(ii) complexes that exhibit color and luminescence changes induced by the presence of vapor molecules have drawn considerable attention because of their potential use as vapor sensors. Generally, the vapochromic responsiveness of Pt(ii)-based complexes is difficult to envisage, because a typical molecular design facilitates the stabilization of a vapor-adsorbed form through weak intermolecular interactions. Herein, we investigate the vapochromic behavior of a Pt(ii) complex with potassium ions, which act as vapor coordination sites, by strongly stabilizing the vapor-adsorbed form. Upon exposure to N,N-dimethylacetamide and N,N-dimethylformamide vapors, the complex exhibits crystal structural transformation with luminescence spectral changes. Crystal structural analysis indicates that the vapor molecules are coordinated to the potassium ions after vapor exposure. This study suggests the possibility of inducing Pt(ii)-based vapochromic responsiveness through establishing potassium-ion-based vapor coordination sites.

A luminescent Pt(ii) complex with potassium ions was successfully synthesized and its coordination-based vapochromic behavior was investigated.

Vapochromic behaviour of a nickel(II)-quinonoid complex with dimensional changes between 1D and higher

The nickel(ii)-chloranilato complex {Ni(ca)(VM)2}n (H2ca = chloranilic acid, VM = coordinated vapour molecules, such as water) shows reversible vapochromism upon exposure to various vapours and subsequent drying by heating. In contrast to the Ni(ii)-quinonoid complex, [Ni(HLMe)2] (H2LMe = 4-methylamino-6-methyliminio-3-oxocyclohexa-1,4-dien-1-olate), which was reported to exhibit vapochromic spin-state switching between high and low spin states, the chloranilato complex does not change its spin state even after the removal of coordinated vapour molecules. X-ray absorption fine structure (XAFS) analysis revealed that the six-coordinate geometry of {Ni(ca)(VM)2}n was maintained even after the removal of vapour molecules, in contrast to the [Ni(HLMe)2] complex. The unique vapochromism that follows the dimensional change between 1D and higher is influenced by the relatively weaker ligand field of the chloranilate ligand.

Guest-Tunable Excited States in a Cyanide-Bridged Luminescent Coordination Polymer

The excited-state energy was tuned successfully by guest molecules in a cyanide-bridged luminescent coordination polymer (CP). Methanol or ethanol vapor reversibly and significantly changed the luminescent color of the CP between green and yellow (Δλ_em = 32 nm). These vapors did not significantly affect the environment around the luminophore in the ground state of the CP, whereas they modulated the excited states for the resulting bathochromic shift. The time-resolved photoluminescent spectra of the CP systems showed that solvent adsorption enhanced the energetic relaxation in the excited states. Furthermore, time-resolved infrared spectroscopy indicated that cyanide bridging in the CP became more flexible in the excited states than that in the ground state, highlighting the sensitivity of the excited states to external stimuli, such as the guest vapor. Overall, guest-tunable excited states will allow the more straightforward design of sensing materials by characterizing the transient excited states.

Structural Insights into the Vapochromic Behavior of Pt- and Pd-Based Compounds

Anionic complexes having vapochromic behavior are investigated: [K(H₂O)][M(ppy)(CN)₂], [K(H₂O)][M(bzq)(CN)₂], and [Li(H₂O)_n][Pt(bzq)(CN)₂], where ppy = 2-phenylpyridinate, bzq = 7,8-benzoquinolate, and M = Pt(II) or Pd(II). These hydrated potassium/lithium salts exhibit a change in color upon being heated to 380 K, and they transform back into the original color upon absorption of water molecules from the environment. The challenging characterization of their structure in the vapochromic transition has been carried out by combining several experimental techniques, despite the availability of partially ordered and/or impure crystalline material. Room-temperature single-crystal and powder X-ray diffraction investigation revealed that [K(H₂O)][Pt(ppy)(CN)₂] crystallizes in the Pbca space group and is isostructural to [K(H₂O)][Pd(ppy)(CN)₂]. Variable-temperature powder X-ray diffraction allowed the color transition to be related to changes in the diffraction pattern and the decrease in sample crystallinity. Water loss, monitored by thermogravimetric analysis, occurs in two stages, well separated for potassium Pt compounds and strongly overlapped for potassium Pd compounds. The local structure of potassium compounds was monitored by in situ pair distribution function (PDF) measurements, which highlighted changes in the intermolecular distances due to a rearrangement of the crystal packing upon vapochromic transition. A reaction coordinate describing the structural changes was extracted for each compound by multivariate analysis applied to PDF data. It contributed to the study of the kinetics of the structural changes related to the vapochromic transition, revealing its dependence on the transition metal ion. Instead, the ligand influences the critical temperature, higher for ppy than for bzq, and the inclination of the molecular planes with respect to the unit cell planes, higher for bzq than for ppy. The first stage of water loss triggers a unit cell contraction, determined by the increase in the b axis length and the decrease in the a (for ppy) or c (for bzq) axis lengths. Consequent interplane distance variations and in-plane roto-translations weaken the π-stacking of the room-temperature structure and modify the distances and angles of Pt(II)/Pd(II) chains. The curve describing the intermolecular Pt(II)/Pd(II) distances as a function of temperature, validated by X-ray absorption spectroscopy, was found to reproduce the coordinate reaction determined by the model-free analysis.

Cooperative phenomenon of vapochromism and proton conduction of luminescent Pt(ii) complexes for the visualisation of proton conductivity

The luminescent and proton conductive Pt(ii) complex [PtCl(tpy-o-py)]Cl and its HCl adduct [PtCl(tpy-o-pyH)]Cl₂ (o-Pt and o-Pt·HCl, respectively; tpy-o-py = 2,2':6',2''-terpyridine-6',2'''-pyridine) were synthesised and their crystal structures, vapochromic behaviour, and proton conduction, were investigated and compared to those of the para isomers [PtCl(tpy-p-py)]Cl and [PtCl(tpy-p-pyH)]Cl₂ (p-Pt and p-Pt·HCl, respectively; tpy-p-py = 2,2':6',2''-terpyridine-4',4'''-pyridine). X-ray structure analysis revealed that the intermolecular metallophilic (PtPt) interaction was negligible in o-Pt but effective in o-Pt·HCl. Reversible transformation between o-Pt and o-Pt·HCl coupled with significant colour and luminescence changes was achieved by four different external stimuli, namely: exposure of o-Pt to humid HCl gas to form o-Pt·HCl, heating, exposure to MeOH vapour, and finally drying in air to regenerate the original o-Pt. The intraligand π-π* orange emission observed for o-Pt exhibited negligible dependence on the relative humidity (RH). Conversely, o-Pt·HCl exhibited red metal-metal-to-ligand charge-transfer (MMLCT) phosphorescence at 725 nm, originating from effective intermolecular Pt-Pt interactions, and interesting vapochromic behaviour that was dependent on the RH. Notably, o-Pt·HCl presented higher conductivity than the p-Pt·HCl isomer at RH < 80%. This trend was reversed at RH values > 80%, probably owing to the second water-adsorption-induced transformation of p-Pt·HCl. The cooperative phenomenon between the proton conduction and vapochromic behaviour observed for both o-Pt·HCl and p-Pt·HCl should allow the visualisation of the proton-conducting pathway, without the need for a bulk electrode, via the absorption and emission colours at both macroscopic and microscopic levels.

Modulation of Metallophilic and π-π Interactions in Platinum Cyclometalated Luminophores with Halogen Bonding

Luminescent cyclometalated complexes [M(C^N^N)CN] (M=Pt, Pd; HC^N^N=pyridinyl- (M=Pt 1, Pd 5), benzyltriazolyl- (M=Pt 2), indazolyl- (M=Pt 3, Pd 6), pyrazolyl-phenylpyridine (M=Pt 4)) decorated with cyanide ligand, have been explored as nucleophilic building blocks for the construction of halogen-bonded (XB) adducts using IC₆ F₅ as an XB donor. The negative electrostatic potential of the CN group afforded CN⋅⋅⋅I noncovalent interactions for platinum complexes 1-3; the energies of XB contacts are comparable to those of metallophilic bonding according to QTAIM analysis. Embedding the chromophore units into XB adducts 1-3⋅⋅⋅IC₆ F₅ has little effect on the charge distribution, but strongly affects Pt⋅⋅⋅Pt bonding and π-stacking, which lead to excited states of MMLCT (metal-metal-to-ligand charge transfer) origin. The energies of these states and the photoemissive properties of the crystalline materials are primarily determined by the degree of aggregation of the luminophores via metal-metal interactions. The adduct formation depends on the nature of the metal and the structure of the metalated ligand, the variation of which can yield dynamic XB-supported systems, exemplified by thermally regulated transition 3↔3⋅⋅⋅IC₆ F₅ .

Cyclometalated Ir(III) complexes as potential electron acceptors for organic solar cells

Cyclometalated iridium(iii) complexes have been investigated as promising electron donor (D) materials in organic solar cells (OSCs) due to their unique octahedral configuration for optimized morphology and their significantly long lifetimes potentially for enhanced exciton dissociation. However, the application as electron acceptor (A) materials has never been reported. In order to fill this blank, herein, two cyclometalated heteroleptic Ir complexes, TRIr and 2TRIr, based on electron donating-accepting type organic ligands with different π-conjugation lengths are reported as electron acceptor materials in comparison with their corresponding main organic ligands. The two Ir complexes exhibit suitable HOMO/LUMO energy levels of -5.55/-3.47 eV and -5.44/-3.48 eV, which are ∼0.1 eV higher in the HOMO and ∼0.15 eV deeper in the LUMO than the TR and 2TR ligands, respectively. 2TRIr with extended ligand π-conjugation displays a poor triplet feature, while TRIr demonstrates obvious metal-to-ligand charge transfer (MLCT) transition absorption, with a triplet component photoluminescence (PL) lifetime of 85 ns in neat films. When blended with PBDB-T in bulk heterojunction (BHJ) OSCs, the power conversion efficiencies (PCEs) are 2-3 times higher than their relevant ligands, with values of 1.20% and 1.62% for TRIr and 2TRIr, and 0.58% and 0.47% for the TR and 2TR ligand-based devices, respectively. TRIr and 2TRIr based active layer blends exhibit poorer hole and electron mobilities, whereas compared with their relatively linear planar ligands, both of the two octahedral Ir complexes exhibit an optimized surface morphology for less bimolecular recombination and more efficient exciton dissociation, thus contributing to improved photovoltaic performance.

Elastic deformability and luminescence of crystals of polyhalogenated platinum(ii)–bipyridine complexes

A series of polyhalogenated platinum(ii)–bipyridine complexes showed solvent-of-crystallisation-dependent elastic flexibility and luminescence.