Nickel‐Catalyzed Asymmetric Hydrogenation of Hydrazones

Engineered Biocatalyst for Enantioselective Hydrazone Reduction

Enantioselective reduction of hydrazones provides a convergent and versatile route to synthesize hydrazine-containing motifs that are commonly found in pharmaceuticals and agrochemicals. However, current methods require the use of precious metals, costly chiral ligands, and/or forcing reaction conditions. Here, we report the development of a biocatalytic approach for enantioselective hydrazone reduction using engineered imine reductases. Following evaluation of an in-house panel of >400 IRED sequences, we identified a single IR361 I127F L179V variant that promotes reduction of Cbz-protected hydrazones. The introduction of additional two mutations via directed evolution afforded HRED1.1 that is 20-fold more active than the parent template and promotes reduction of a variety of protected hydrazones in high yields and selectivities (>99% e.e.), including in preparative scale biotransformations. Structural analysis of HRED1.1 provides insights into the origins of its unique hydrazone reductase activity. This study offers a powerful biocatalytic route to synthesize valuable chiral hydrazine products and further expands the impressive range of transformations accessible with engineered imine reductases.

Enantioselective Synthesis of Chiral β2-Amino Phosphorus Derivatives via Nickel-Catalyzed Asymmetric Hydrogenation

Compared with chiral β3-amino phosphorus compounds, which can be easily derived from natural optically pure α-amino acids, obtaining chiral β2-amino phosphorus derivatives remains a challenge. These derivatives, which cannot be derived from chiral natural amino acids, possess unique biological activities or potential catalytic activities. Herein, highly enantioselective hydrogenation for the preparation of chiral β2-amino phosphorus derivatives from E-β-enamido phosphorus compounds is reported by using a green and low-cost earth-abundant metal nickel catalyst (13 examples of 99% ee). In particular, this catalytic system provides the same enantiomer product from the E- and Z-alkene substrates, and the E/Z-substrate mixtures provide good results (up to 96% ee). The products can be diversely derivatized, and the derivatives exhibit good catalytic activities as novel chiral β2-aminophosphine ligands. Density functional theory calculations reveal that the weak attractive interactions between the nickel catalyst and the substrate are crucial for achieving perfect enantioselectivities. In addition, the different coordination modes between the E- or Z-substrates and the catalyst may result in the formation of the same enantiomer product.

Biocatalytic Synthesis of Ruxolitinib Intermediate via Engineered Imine Reductase

An enzyme catalyzed strategy for the synthesis of a chiral hydrazine from 3-cyclopentyl-3-oxopropanenitrile 5 and hydrazine hydrate 2 is presented. An imine reductase (IRED) from Streptosporangium roseum was identified to catalyze the reaction between 3-cyclopentyl-3-oxopropanenitrile 5 and hydrazine hydrate 2 to produce trace amounts of (R)-3-cyclopentyl-3-hydrazineylpropanenitrile 4. We employed a 2-fold approach to optimize the catalytic performance of this enzyme. First, a transition state analogue (TSA) model was constructed to illuminate the enzyme-substrate interactions. Subsequently, the Enzyme_design and Funclib methods were utilized to predict mutants for experimental evaluation. Through three rounds of site-directed mutagenesis, site saturation mutagenesis, and combinatorial mutagenesis, we obtained mutant M6 with a yield of 98% and an enantiomeric excess (ee) of 99%. This study presents an effective method for constructing a hydrazine derivative via IRED-catalyzed reductive amination of ketone and hydrazine. Furthermore, it provides a general approach for constructing suitable enzymes, starting from nonreactive enzymes and gradually enhancing their catalytic activity through active site modifications.

P-Stereogenic Phosphorus Ligands in Asymmetric Catalysis

Chiral phosphorus ligands play a crucial role in asymmetric catalysis for the efficient synthesis of useful optically active compounds. They are largely categorized into two classes: backbone chirality ligands and P-stereogenic phosphorus ligands. Most of the reported ligands belong to the former class. Privileged ones such as BINAP and DuPhos are frequently employed in a wide range of catalytic asymmetric transformations. In contrast, the latter class of P-stereogenic phosphorus ligands has remained a small family for many years mainly because of their synthetic difficulty. The late 1990s saw the emergence of novel P-stereogenic phosphorus ligands with their superior enantioinduction ability in Rh-catalyzed asymmetric hydrogenation reactions. Since then, numerous P-stereogenic phosphorus ligands have been synthesized and used in catalytic asymmetric reactions. This Review summarizes P-stereogenic phosphorus ligands reported thus far, including their stereochemical and electronic properties that afford high to excellent enantioselectivities. Examples of reactions that use this class of ligands are described together with their applications in the construction of key intermediates for the synthesis of optically active natural products and therapeutic agents. The literature covered dates back to 1968 up until December 2023, centering on studies published in the late 1990s and later years.

Syntheses, Characterization, and Multifaceted Coordination Chemistry of Hydrazonido Titanium Complexes

The reaction of hydrazones with bis(π-η5:σ-η1-pentafulvene)titanium complexes leads to both hydrazonido and hydrazido complexes depending on the interaction of the hydrazone with the fulvene ligand of the metal complex. The molecular structures mostly reveal κ2N,N side-on coordination of the hydrazonido ligand due to the deprotonation of the N-H bond by one of the fulvene moieties. Instead of deprotonation, the reaction of the bis(adamantylidene fulvene)titanium complexes with cinnamon aldehyde phenylhydrazone leads to κ1N coordination. By using donating groups in the backbone of the hydrazone ligands, there are exceptions to this coordination mode due to the insertion of the C═N double bond into the Ti-Cexo bond of the pentafulvene moiety. Using 2-pyridinecarboxaldehyde phenylhydrazone, a formal κ3N,N,N ligand system is formed by the coordination of the pyridine nitrogen atom to the metal center via consecutive N-H deprotonation and insertion. Finally, the use of salicylaldehyde phenylhydrazone ultimately produces a complex with the κ3N,N,O coordination mode by double deprotonation of the hydrazone N-H and O-H functions. Because of its slow conversion to the final product, the intermediate was isolated as an insertion product with consecutive O-H deprotonation, showing a κ2N,O coordination mode of the hydrazido ligand.

The Proton of Alcohols as Hydrogen Source in Diboron-Mediated Nickel-Catalyzed Asymmetric Transfer Hydrogenation of Cyclic N-Sulfonyl Imines

The proton of alcohols as the sole hydrogen source in diboron-mediated nickel-catalyzed asymmetric transfer hydrogenation of cyclic N-sulfonyl imines has been developed, providing the chiral cyclic sulfamidates in excellent enantioselectivities. The mechanistic investigations suggested that the proton of alcohols could be activated by tetrahydroxydiboron to form active nickel hydride species.

Enantioselective Synthesis of Chiral Cyclic Hydrazines by Ni-Catalyzed Asymmetric Hydrogenation

An efficient Ni-(S,S)-Ph-BPE complex that catalyzed asymmetric hydrogenation of cyclic N-acyl hydrazones has been developed to produce various chiral cyclic hydrazines in high yields with excellent enantioselectivities of up to >99% enantiomeric excess. Moreover, the hydrogenation can not only proceed smoothly on a gram scale under lower catalyst loading (S/C = 3000) without any decrease of enantioselectivity but can also be applied to the asymmetric synthesis of a RIP-1 kinase inhibitor.

Ni-Catalyzed Asymmetric Hydrogenation of α-Substituted α,β-Unsaturated Phosphine Oxides/Phosphonates/Phosphoric Acids

Efficient Ni/(S,S)-Ph-BPE-catalyzed asymmetric hydrogenation of α-substituted α,β-unsaturated phosphine oxides/phosphonates/phosphoric acids has been successfully developed, and a wide range of chiral α-substituted phosphines hydrogenation products were obtained in generally high yields with excellent enantioselective control (92%-99% yields, 84%->99% ee). This method features a cheap transition metal nickel catalytic system, high functional group tolerance, wide substrate scope generality, and excellent enantioselectivity. A plausible catalytic cycle was proposed for this asymmetric hydrogenation according to the results of deuterium-labeling experiments.

Precise Synthesis of Chiral Z-Allylamides by Cobalt-Catalyzed Asymmetric Sequential Hydrogenations

Asymmetric sequential hydrogenations of conjugated enynes have been developed using a Ph-BPE-Co^I catalyst for the precise synthesis of chiral Z-allylamides in high activity (up to 1000 substrate/catalyst (S/C)) and with excellent enantioselectivity (up to >99 % enantiomeric excess (ee)). Mechanism experiments and theoretical calculations support a cationic Co^I /Co^III redox catalytic cycle. The catalytic activity difference between cobalt complexes of Ph-BPE and QuinoxP* was explained by the process decomposition of rate-determining step in the second hydrogenation.

Nickel-Catalyzed Asymmetric Hydrogenation of α-Substituted Vinylphosphonates and Diarylvinylphosphine Oxides

Chiral α-substituted ethylphosphonate and ethylphosphine oxide compounds are widely used in drugs, pesticides, and ligands. However, their catalytic asymmetric synthesis is still rare. Of the only asymmetric hydrogenation methods available at present, all cases use rare metal catalysts. Herein, we report an efficient earth-abundant transition-metal nickel catalyzed asymmetric hydrogenation affording the corresponding chiral ethylphosphine products with up to 99 % yield, 96 % ee (enantiomeric excess) (99 % ee, after recrystallization) and 1000 S/C (substrate/catalyst); this is also the first study on the asymmetric hydrogenation of terminal olefins using a nickel catalyst under a hydrogen atmosphere. The catalytic mechanism was investigated via deuterium-labelling experiments and calculations which indicate that the two added hydrogen atoms of the products come from hydrogen gas. Additionally, it is believed that the reaction involves a Ni^II rather than Ni⁰ cyclic process based on the weak attractive interactions between the Ni catalyst and terminal olefin substrate.

The Origin of Stereoselectivity in the Hydrogenation of Oximes Catalyzed by Iridium Complexes: A DFT Mechanistic Study

Herein the reaction mechanism and the origin of stereoselectivity of asymmetric hydrogenation of oximes to hydroxylamines catalyzed by the cyclometalated iridium (III) complexes with chiral substituted single cyclopentadienyl ligands (Ir catalysts A1 and B1) under acidic condition were unveiled using DFT calculations. The catalytic cycle for this reaction consists of the dihydrogen activation step and the hydride transfer step. The calculated results indicate that the hydride transfer step is the chirality-determining step and the involvement of methanesulfonate anion (MsO^-) in this reaction is of importance in the asymmetric hydrogenation of oximes catalyzed by A1 and B1. The calculated energy barriers for the hydride transfer steps without an MsO^- anion are higher than those with an MsO^- anion. The differences in Gibbs free energies between TSA5-1fR/TSA5-1fS and TSB5-1fR/TSB5-1fS are 13.8/13.2 (ΔΔG^‡ = 0.6 kcal/mol) and 7.5/5.6 (ΔΔG^‡ = 1.9 kcal/mol) kcal/mol for the hydride transfer step of substrate protonated oximes with E configuration (E-2a-H⁺) with MsO^- anion to chiral hydroxylamines product R-3a/S-3a catalyzed by A1 and B1, respectively. According to the Curtin-Hammet principle, the major products are hydroxylamines S-3a for the reaction catalyzed by A1 and B1, which agrees well with the experimental results. This is due to the non-covalent interactions among the protonated substrate, MsO^- anion and catalytic species. The hydrogen bond could not only stabilize the catalytic species, but also change the preference of stereoselectivity of this reaction.

Proton-Promoted Nickel-Catalyzed Asymmetric Hydrogenation of Aliphatic Ketoacids

A robust and highly active homogeneous chiral nickel-phosphine complex for the asymmetric hydrogenation of aliphatic γ- and δ-ketoacids has been discovered. The hydrogenation could proceed smoothly in the presence of 0.0133 mol% catalyst loading (S/C=7500). The coordination chemistry and catalytic behavior of Ni(OTf)₂ with (S,S)-Ph-BPE were explored by ¹ H NMR and HRMS. The mechanistic studies revealed that a proton promoted the activation of the substrate C=O bond and controlled the stereoselectivity through hydrogen bonds. A series of chiral γ- and δ-alkyl substituted lactones were obtained in high yields with excellent enantioselectivities (up to 98 % yield and 99 % ee). In addition, this catalytic system also demonstrated that levulinic acid produced from a biomass feedstock was converted into chiral γ-valerolactone without loss of ee value.

Nickel-catalyzed enantioselective umpolung hydrogenation for stereoselective synthesis of β-amido esters

Nickel complexes ligated by strongly donating diphosphines catalyze enantioselective hydrogenation for the preparation of acyclic and cyclic β-amido esters. A combination of acetic acid and indium powder provides protons and electrons to form nickel hydrido complexes under umpolung hydrogenation conditions.

Evaluation of 3,3′-Triazolyl Biisoquinoline N,N′-Dioxide Catalysts for Asymmetric Hydrosilylation of Hydrazones with Trichlorosilane

A new class of axial-chiral biisoquinoline N,N′-dioxides was evaluated as catalysts for the enantioselective hydrosilylation of acyl hydrazones with trichlorosilane. While these catalysts provided poor to moderate reactivity and enantioselectivity, this study represents the first example of the organocatalytic asymmetric reduction of acyl hydrazones. In addition, the structures and energies of two possible diastereomeric catalyst–trichlorosilane complexes (2a–HSiCl₃) were analyzed using density functional theory calculations.