The limiting mobility of DNA sequencing fragments for both cross-linked and noncross-linked polymers in capillary electrophoresis: DNA sequencing at 1200 V cm-1

High speed capillary zone electrophoresis-mass spectrometry via an electrokinetically pumped sheath flow interface for rapid analysis of amino acids and a protein digest

While capillary zone electrophoresis (CZE) has been used to produce very rapid and efficient separations, coupling these high-speed separations with mass spectrometry (MS) has been challenging. Now, with much faster and sensitive mass spectrometers, it is possible to take full advantage of the CZE speed and reconstruct the fast migrating peaks. Here are three high-speed CZE-MS analyses via an electrokinetically pumped sheath-flow interface. The first separation demonstrates CZE-ESI-MS of an amino acid mixture with a 2-min separation, >50,000 theoretical plates, low micromolar concentration detection limits, and subfemtomole mass detection limits (LTQ XL mass spectrometer). The second separation with our recently improved third-generation CE-MS interface illustrates a 20 amino acid separation in ∼7min with an average over 200,000 plate counts, and results in almost-baseline resolution of structural isomers, leucine and isoleucine. The third separation is of a BSA digest with a reproducible CZE separation and mass spectrometry detection in 2min. CZE-MS/MS analysis of the BSA digest identified 31 peptides, produced 52% sequence coverage, and generated a peak capacity of ∼40 across the 1-min separation window (Q-Exactive mass spectrometer).

Electrophoretic separation of DNA in gels and nanostructures

The development of nanostructure devices has opened the door to new DNA separation techniques and fundamental investigations. With advanced nanotechnologies, artificial gels (e.g. nanopillar arrays, nanofilters) can be manufactured with controlled and ordered geometries. This contrast with gels, where the pores are disordered and the range of available pore sizes is limited by the level of cross-linking and the mechanical properties of the gel. In this review, we recall the theories developed for free-solution and gel electrophoresis (extended Ogston model, biased reptation and entropic trapping) and from this perspective, suggestions for future concepts for fast DNA separation using nanostructures will be given.

Capillary electrophoresis at the omics level: Towards systems biology

Emerging systems biology aims at integrating the enormous amount of existing omics data in order to better understand their functional relationships at a whole systems level. These huge datasets can be obtained through advances in high-throughput, sensitive, precise, and accurate analytical instrumentation and technological innovation. Separation sciences play an important role in revealing biological processes at various omic levels. From the perspective of systems biology, CE is a strong candidate for high-throughput, sensitive data generation which is capable of tackling the challenges in acquiring qualitative and quantitative knowledge through a system-level study. This review focuses on the applicability of CE to systems-based analytical data at the genomic, transcriptomic, proteomic, and metabolomic levels.

Copolymer solutions as separation media for DNA capillary electrophoresis

A review on copolymers used as DNA separation media in capillary electrophoresis is presented. Copolymers can combine the desirable properties of different monomers, yielding many attractive features, such as high sieving ability, low viscosity, self-assembly behavior and dynamic coating ability. Copolymers with different molecular architecture, including block copolymers, random copolymers, and graft copolymers, have been developed and tested as DNA separation media with unique and tailored properties that cannot be achieved easily by using only homopolymers.

DNA sequencing by capillary electrophoresis using copolymers of acrylamide and N,N-dimethylacrylamide

Copolymers of acrylamide (AM) and N,N-dimethylacrylamide (DMA) with AM to DMA molar ratios of 3:1, 2:1 and 1:1 and molecular weights of about 2.2 MDa were synthesized. The polymers were tested as separation media in DNA sequencing analysis by capillary electrophoresis (CE). The dynamic coating ability of polydimethylacrylamide (PDMA) and the hydrophilicity of polyacrylamide (PAM) have been successfully combined in these random copolymers. A separation efficiency of over 10 million theoretical plates per meter has been reached by using the bare capillaries without the additional polymer coating step. Under optimized separation conditions for longer read length DNA sequencing, the separation ability of the copolymers decreased with decreasing AM to DMA molar ratio from 3:1, 2:1 and 1:1. In comparison with PAM, the copolymer with a 3:1 AM:DMA ratio showed a higher separation efficiency. By using a 2.5% w/v copolymer with 3:1 AM:DMA ratio, one base resolution of 0.55 up to 699 bases and 0.30 up to 963 bases have been achieved in about 80 min at ambient temperatures.

Fast separation of DNA sequencing fragments in highly alkaline solutions of linear polyacrylamide using electrophoresis in bare silica capillaries

An optimized procedure for the fast separation of DNA sequencing fragments in short bare fused-silica capillaries filled with highly alkaline solutions of replaceable linear polyacrylamide is presented. High denaturing abilities of the separation media at pH values over 12 are the main reason for their applications in analyses of ssDNA fragments. Moreover, the alkaline solutions of polyacrylamide provide other advantageous properties: three times higher electrophoretic mobility of ssDNA fragments in comparison to those in urea, negligibly low electroosmotic flow in uncoated capillaries, and an adequate stability to a fast alkaline hydrolysis. The separation power of this procedure is enhanced strongly by using monocarboxy poly(ethylene glycol), a terminator for transient isotachophoresis, which eliminates the electromigration dispersion. A high separation efficiency of our system enables to reduce analysis time to several minutes by decreasing the effective lengths of capillaries to 7 cm. A special sample introduction by diffusion is successfully applied. The experimental results demonstrate a potential of the alkaline electrolytes for an implementation in diagnostic sequencing practice.

Improvement of base-calling in multilane automated DNA sequencing by use of electrophoretic calibration standards, data linearization, and trace alignment

We present a new method for the linearization and alignment of data traces generated by multilane automated DNA sequencing instruments. Application of this method to data generated with the Visible Genetics Open Gene DNA sequencing system (using MicroCel 700 gel cassettes, with a 25 cm separation distance) allows read lengths of > 1,000 nucleotides to be routinely obtained with high confidence and > 97% accuracy. This represents an increase of 10-15% in average read length, relative to data from this system that have not been processed in the fashion described herein. Most importantly, the linearization and alignment method allows usable sequence to be obtained from a fraction of 10-15% of data sets which, because of original trace misalignment problems, would otherwise have to be discarded. Our method involves adding electrophoretic calibration standards to the DNA sequencing fragments. The calibration standards are labeled with a dye that differs spectrally from the dye attached to the sequencing fragments. The calibration standards are identical in all the lanes. Analysis of the mobilities of the calibration standards allows correction for both systematic and random variation of electrophoretic properties between gel lanes. We have successfully used this method with two-dye and three-dye DNA sequencing instruments.

Fast DNA sequencing up to 1,000 bases by capillary electrophoresis using poly(N,N-dimethylacrylamide) as a separation medium

Poly(N,N-dimethylacrylamide) (PDMA) with a molecular mass of 5.2 x 10(6) g/mol has been synthesized and used in DNA sequencing analysis by capillary electrophoresis (CE). A systematic investigation is presented on the effects of different separation conditions, such as injection amount, capillary inner diameter, polymer concentration, effective separation length, electric field and temperature, on the resolution. DNA sequencing up to 800 bases with a resolution (R) limit of 0.5 (and 1,000 bases with a resolution limit of 0.3) and a migration time of 96 min was achieved by using 2.5% w/v polymer, 150 V/cm separation electric field, and 60 cm effective separation length at room temperature on a DNA sample prepared with FAM-labeled--21M13 forward primer on pGEM3Zf(+) and terminated with ddCTP. Ultrafast and fast DNA sequencing up to 420 and 590 bases (R > or = 0.5) were also achieved by using 3% w/v polymer and 40 cm effective separation length with a separation electric field of 525 and 300 V/cm, and a migration time of 12.5 and 31.5 min, respectively. PDMA has low viscosity, long shelf life and dynamic coating ability to the glass surface. The unique properties of PDMA make it a very good candidate as a separation medium for large-scale DNA sequencing by capillary array electrophoresis (CAE).

Gel electrophoretic mobility of single-stranded DNA: the two reptation field-dependent factors

The reptation model is the dominant theory in understanding the electrophoretic separation of single-stranded DNA molecules in gels or entangled polymer solutions. Recently, we showed that the Ogston and reptation regimes are separated by an entropic trapping regime at low field intensities. Here, we report the first comparison of the field-dependent part of the DNA mobility for both small and long reptating molecules. We show that both mobilities increase linearly with field intensity, with the mobility of the longer (comigrating) fragments increasing faster than that of the smaller ones. We compare our results to the predictions of the biased reptation model.

DNA sequencing by capillary array electrophoresis and microfabricated array systems

To comply with the current needs for high-speed DNA sequencing analysis, several instruments and innovative technologies have been introduced by several groups in recent years. This review article discusses and compares the issues regarding high-throughput DNA sequencing by electrophoretic methods in miniaturized systems, such as capillaries, capillary arrays, and microchannels. Initially, general features of several capillary array designs (including commercial ones) will be considered, followed by similar analyses with microfabricated array electrophoretic devices and how they can contribute to the success of large sequencing projects.

Separation of double-stranded and single-stranded DNA in polymer solutions: I. Mobility and separation mechanism

We have studied the separation of single-stranded and double-stranded DNA in a matrix of entangled, linear poly-N,N-dimethylacrylamide. Our results give better insight into the mechanisms involved during separations in polymer solutions. The dependence of different parameters on DNA size, electric field, pore size and the polymer chain length are evaluated and compared to theoretical predictions. Striking differences between experimental data and predicted scaling laws are found. Our data should help to optimize DNA separation in capillary electrophoresis and to improve existing models for DNA separation in porous matrices.

Analysis of the electrophoretic migration of DNA frayed wires

We analyzed the electrophoretic behaviour of the unusual multi-stranded DNA complexes, frayed wires, in polyacrylamide gels under non-denaturing conditions. Frayed wires arise from the association of several strands of a parent oligonucleotide that possesses long terminal runs of consecutive guanines. According to the structural model proposed for frayed wires, there are two distinct conformational domains, a guanine stem and single stranded arms displaced from the stem. The presence of the two domains affects the electrophoretic migration of the frayed wires, resulting in a greater retardation compared to that of double stranded DNA of the same molecular weight. The degree of retardation is determined by the relative length of the stem and the arms; the complexes with longer arms display a stronger dependence on the total molecular weight. Reptation plots (mobility x molecular weight vs. molecular weight) were used to study the electrophoretic behaviour of frayed wires that arise from the different parent oligonucleotides. The plots are unique for each type of frayed wire. The characteristic parameter, the position of the maximum of the reptation plot, depends on the type of the frayed wire as well as the total gel concentration. The plots become similar when we replot the mobility data taking into account only the single stranded arms of the frayed wires. The positions of the maximum and the overall shape are very close for the four types of frayed wires studied.

Separation techniques

The past two years have seen continued development of capillary electrophoresis methods. The separation performance of flowable sieving media now equals, and in some respects exceeds, that provided by gels. The application of microfabrication techniques to separation science is gaining pace. There is a continuing trend towards miniaturization and integration of separation with preparative or analytical steps. Innovative separation methods based on microfabrication technology include electrophoresis in purpose-designed molecular sieves, dielectric, trapping using microelectrodes, and force-free motion in Brownian ratchets.

Recent developments in DNA electrophoretic separations

DNA electrophoresis is now a fairly mature technology. Nevertheless, as we approach the 21st century, new ideas are frequently suggested that could lead to a revolution for DNA sequencing and mapping. Here, we review some of the novel concepts that have been studied since ca. 1990. Our review focuses on new separation mechanisms, new sieving matrices and recent conceptual advances.

DNA cycle sequencing of a common restriction fragment of Staphylococcus aureus bacteriophages by capillary electrophoresis using replaceable linear polyacrylamide

The nucleotide sequence of a part of a 4.9 kbp common restriction fragment isolated from Staphylococcus aureus bacteriophage (bacterial virus) 3A has been determined by capillary electrophoresis (CE). The fast separation of sequencing fragments in linear polyacrylamide solution at a temperature of 55 degrees C allowed the reading of more than 650 bases of sequence in 60 min. The single strand (ss)DNA fragments were prepared by cycle sequencing with fluorescently labeled dideoxy-terminators on the cloned bacteriophage DNA template. With respect to analysis speed, sequence read-length, low sample consumption and automation, CE offers a simple, labor-saving and inexpensive procedure for DNA sequencing. Operating the CE columns at elevated temperature proved to be a rapid procedure capable of extending sequence read-length. The resulting sequence of the common restriction fragment can be used for the preparation of specific primers and oligonucleotide hybridization probes for identification of Staphylococcus aureus bacteriophages and/or prophages belonging to the bacteriophage species 3A.

DNA sequencing by capillary electrophoresis

Capillary electrophoresis has been under development for DNA sequencing since 1990. This development has traveled down two parallel tracks. The first track studied the details of DNA separation by gel electrophoresis. Early work stressed rapid separations at high electric fields, which reached the extreme of a 3.5 min sequencing run at 1200 V/cm. While fast separations are useful in clinical resequencing applications for mutation detection, long read-length is important in genomic sequencing. Unfortunately, sequence read-length degrades as electric field and sequencing speed increases; this tradeoff between read-length and sequencing speed appears to be a fundamental result of the physics of DNA separations in a polymer. The longest sequence sequencing read-lengths have been obtained at modest electric fields, high temperature, and with low concentration noncrosslinked polymers. In parallel with our understanding of DNA separations, the second track of DNA sequencing development considered the design of large-scale capillary instruments, wherein hundreds of DNA samples can be sequenced in parallel. Real-world application of these very high throughput capillary electrophoresis systems will require significant investment in sample preparation technology.

Gel electrophoresis of DNA fragments in narrow-bore capillaries

In this work, we studied the behavior of electrophoretic columns, having an inner diameter (ID) of 2-10 microm, filled with a cross-linked polyacrylamide gel matrix. The usefulness of these columns for DNA sequencing is discussed. Evaluation of column performance included tests of gel stability and migration time reproducibility. Confocal laser-induced fluorescence (LIF)-detection was employed utilizing a 488 nm argon ion laser for separations of C- and T-terminated DNA Sanger fragments. Reducing the inner diameter of the column from 50 microm to 10 microm resulted in an approximately eightfold increase in lifetime, under conditions in which the columns were subjected to a field strength of 1000 V/cm. The 10 microm ID columns were utilized for separation of Sanger fragments, and adequate detection sensitivity was obtained by stacking of the fragments from a deionized sample solution. A linear algorithm for retention data synchronization between individual electropherograms was employed to provide a route towards a reliable automated base calling protocol.

Separation of DNA sequencing fragments up to 1000 bases by using poly(ethylene oxide)-filled capillary electrophoresis

We have demonstrated that DNA bases up to 1000 base pairs (bp) in a sequencing ladder can be separated using poly(ethylene oxide)-filled capillary electrophoresis (resolution of raw data = 0.5 at 966 bp). Separation performance of this sieving matrix has been tested under different experimental conditions. It was found that the electric field strength played a critical role in the onset of reptation and thus the separation efficiency. Optimized gel composition and concentration is required for good separation, but the total gel concentration should lie between 2.5 and 3.0%. We observed that the capillary length influences the number of theoretical plates and the maximum readable length of DNA. For sequencing up to 500 bp, relatively nonviscous solutions can be used, greatly facilitating the replacement of the sieving matrix in between runs.