Contemporary sample stacking in analytical electrophoresis

In-line sample concentration in capillary electrophoresis by cyclodextrin to admicelle microextraction

Cyclodextrins (CDs) as a pseudophase in pseudophase-to-pseudophase microextraction (P2ME) in capillary zone electrophoresis (CZE) are proposed. In this P2ME mode called CD to admicelle ME, a long plug of dilute analyte solution prepared in cetyltrimethylammonium bromide (CTAB) at the critical micellar concentration was injected into the capillary. This formed CTAB admicelles at the interface between the solution and the negatively charged capillary surface, where the analytes were trapped. The injection of CD solution released the admicelles and the analytes from the capillary surface due to the formation of stable CD/CTAB inclusion complexes. The analytes are concentrated at the CD front during injection and voltage separation. Various neutral CDs were found to be effective for CD to admicelle ME. To implement this in-line sample concentration technique in CZE, CD concentration, sample injection time, and sample:CD solution injection ratio were optimized. The optimized conditions for five model anionic analytes, namely, 4-bromophenol, sulindac, sulfamethizole, 4-vinylbenzoic acid, and succinylsulfathiazole, were 20 mM α-CD in 20 mM sodium tetraborate (pH 9.2) solution, sample injection time of 370 s, and CD:sample injection ratio of 1:2. The sensitivity enhancement factors (SEFs) were between 112 and 168. The SEFs of sulindac and sulfamethizole in particular were similar to previously published off-line microextraction techniques, which are typically time-consuming. The calculated values of LOQ, intra-/inter-day (n = 6/n = 10, 3 days) repeatability, and linearity (R2) of CD to admicelle ME were 0.0125-0.05 µg/mL, 1.5-4.6%, 1.8-4.8%, and ≥0.999, respectively. Finally, the potential of CD to admicelle ME to the analysis of artificial urine samples was demonstrated.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Recent progress of sample stacking in capillary electrophoresis (2016-2018)

Electrophoretic sample stacking comprises a group of capillary electrophoretic techniques where trace analytes from the sample are concentrated into a short zone (stack). This paper is a continuation of our previous reviews on the topic and brings a survey of more than 120 papers published approximately since the second quarter of 2016 till the first quarter of 2018. It is organized according to the particular stacking principles and includes chapters on concentration adjustment (Kohlrausch) stacking, on stacking techniques based on pH changes, on stacking in electrokinetic chromatography and on other stacking techniques. Where available, explicit information is given about the procedure, electrolyte(s) used, detector employed and sensitivity reached. Not reviewed are papers on transient isotachophoresis which are covered by another review in this issue.

Recent progress of sample stacking in capillary electrophoresis (2014-2016)

The term "sample stacking" comprises a relatively broad spectrum of techniques that already form an almost inherent part of the methodology of CZE. Their principles are different but the effect is the same: concentration of a diluted analyte into a narrow zone and considerable increase of the method sensitivity. This review brings a survey of papers on electrophoretic sample stacking published approximately since the second quarter of 2014 till the first quarter of 2016. It is organized according to the principles of the stacking methods and includes chapters aimed at the concentration adjustment principle (Kohlrausch stacking), techniques based on pH changes, micellar methods, and other stacking techniques. Not reviewed are papers on transient ITP that are covered by another review in this issue.

Trace determination of tetracyclines in water samples by capillary zone electrophoresis combining off-line and on-line sample preconcentration

In this work, a sensitive and reliable method using capillary zone electrophoresis with UV detection has been developed for trace determination of tetracycline antibiotics in river, spring, and ground waters. A solid-phase extraction method using Oasis HLB was applied for off-line preconcentration and cleanup of water samples, in combination with an on-line preconcentration methodology named large volume sample stacking with polarity switching. Different parameters were optimized in order to obtain an adequate separation combined with the highest sensitivity, using 75 mM sodium carbonate (pH 10) and 1 mM EDTA as separation buffer, applying a voltage of 25 kV at 25°C. The samples were injected in water at 1 bar for 1 min, applying then -25 kV and starting the sample stacking. Sample matrix removal from the capillary was controlled by monitoring the electric current (when the 95% of the separation current is reached the stacking process is completed). The applied voltage was then switched from negative to a positive value of 25 kV in order to separate the compounds. Under optimum conditions, sensitivity enhancement factors ranged from 303 to 428 for the studied compounds. The combination of both off-line and on-line preconcentration procedures provided a total sensitivity enhancement factor about 20 000, obtaining detection limits from 67 to 167 ng/L. The precision (intra- and interday), expressed as %RSD was below 12%. Recoveries obtained from river, spring, and ground waters ranged from 87 to 96%. Thus, this procedure is suitable for monitoring these compounds in water samples.

Recent developments in capillary and microchip electroseparations of peptides (2011-2013)

The review presents a comprehensive survey of recent developments and applications of capillary and microchip electroseparation methods (zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography) for analysis, isolation, purification, and physicochemical and biochemical characterization of peptides. Advances in the investigation of electromigration properties of peptides, in the methodology of their analysis, including sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, as well as in detection of peptides, are presented. New developments in particular CE and CEC modes are reported and several types of their applications to peptide analysis are described: conventional qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC techniques to provide relevant physicochemical characteristics of peptides are demonstrated.

Separation of ketoprofen enantiomers at nanomolar concentration levels by micellar electrokinetic chromatography with on-line electrokinetic preconcentration

Abstract Separation of enantiomers represents an extremely important task in the field of analytical chemistry. This paper contributes to the field of the on-line preconcentration of enantiomers by developing a novel setup based on the electrokinetic accumulation of ketoprofen enantiomers on the pH boundary followed by enantioselective mobilization by a mixture of SDS, sulfated-β-cyclodextrin (S-β-CD), and trimethyl-β-cyclodextrin (TM-β-CD). Under the best conditions, where the injection electrolyte was composed of 50 mmol L−1 borate/NaOH pH 9.5 with 60% (v/v) methanol, the background electrolyte contained 50 mmol L−1 phosphate/NaOH pH 2.5, and the mobilization electrolyte consisted of 50 mmol L−1 phosphate/NaOH pH 2.5 with 4.0% (w/v) S-β-CD, 0.5% (w/v) TM-β-CD, and 20 mmol L−1 SDS, the determination of nanomolar concentration levels of ketoprofen enantiomers was successful by using micellar electrokinetic chromatography with a common UV detection. LODs were 2.5 nmol L−1 and 3.4 nmol L−1, which represent enhancement factors of 9921 and 8529, respectively. The method was also applied to the determination of ketoprofen enantiomers in waste water samples by using simple filtration as a clean-up step. Here, the recovery of ketoprofen enantiomers was 91% at the concentration level of 5×10−9 mol L−1. Graphical abstract

Differentiation of enantiomers by capillary electrophoresis

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.

Capillary electrophoretic enzyme assays

In the past years, capillary electrophoresis has become a frequently used technique for enzyme assays due to the high separation efficiency and versatility as well as small sample size and low consumption of chemicals. The capillary electrophoresis assays can be divided into two general categories: pre-capillary (or offline) assays and in-capillary (or online) assays. In pre-capillary assays, the incubation is performed offline and substrate(s) and product(s) are subsequently analyzed by capillary electrophoresis. In in-capillary assays enzyme reaction and separation of the analytes are performed inside the same capillary. In such assays the enzyme is either immobilized or in solution. The latter techniques is also referred to as electrophoretically mediated microanalysis (EMMA) indicating that the individual steps of the incubation as well as analysis are performed via electrophoretic phenomena. This chapter describes both techniques using the deacetylation of acetyl-lysine residues in model peptides by sirtuin enzymes as well as the hydrolysis of acetylthiocholine by acetylcholinesterase as examples.

Contribution of CE to the analysis of protein or peptide biomarkers

Biomarker analysis is pivotal for disease diagnosis and one important class of biomarkers is constituted by proteins and peptides. This review focuses on protein and peptide analyses from biological fluids performed by capillary electrophoresis. The various strategies that have been reported to prevent difficulties due to the handling of real samples are described. Innovative techniques to overcome the complexity of the sample, to prevent the adsorption of the analytes on the inner capillary wall, and to increase the sensibility of the analysis are summarized and illustrated by different applications. To fully illustrate the contribution of CE to the analysis of biomarkers from human sample, two detailed protocols are given: the analysis from CSF of five amyloid peptide, biomarkers of the Alzheimer disease, and the analysis of sialoforms of transferrin from human serum.

Contemporary sample stacking in analytical electrophoresis

Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).

Recent advances in enrichment techniques for trace analysis in capillary electrophoresis

CE is gaining great popularity as a well-established separation technique for many fields such as pharmaceutical research, clinical application, environmental monitoring, and food analysis, owing to its high resolving power, rapidity, and small amount of samples and reagents required. However, the sensitivity in CE analysis is still considered as being inferior to that in HPLC analysis. Diverse enrichment methods and techniques have been increasingly developed for overcoming this issue. In this review, we summarize the recent advances in enrichment techniques containing off-line preconcentration (sample preparation) and on-line concentration (sample stacking) to enhancing sensitivity in CE for trace analysis over the last 5 years. Some relatively new cleanup and preconcentration methods involving the use of dispersive liquid-liquid microextraction, supercritical fluid extraction, matrix solid-phase dispersion, etc., and the continued use and improvement of conventional SPE, have been comprehensively reviewed and proved effective preconcentration alternatives for liquid, semisolid, and solid samples. As for CE on-line stacking, we give an overview of field amplication, sweeping, pH regulation, and transient isotachophoresis, and the coupling of multiple modes. Moreover, some limitations and comparisons related to such methods/techniques are also discussed. Finally, the combined use of various enrichment techniques and some significant attempts are proposed to further promote analytical merits in CE.

Review of recent developments of on-line sample stacking techniques and their application in capillary electrophoresis

Capillary electrophoresis (CE) has become one of the most useful tools in separation science because of its high separation efficiency, low cost, versatility, ease of sample preparation and automation. However, some limitations of CE, such as poor concentration sensitivity due to its lower sample loading and shorter optical path length, limits its further applications in separation science. In order to solve this problem, various on-line sample preconcentration techniques such as transient isotachophoresis preconcentration, field-enhanced sample stacking, micelle to solvent stacking, micelle collapse, dynamic pH junction, sweeping, solid phase extraction, single drop microextraction and liquid phase microextraction have been combined with CE. Recent developments, applications and some variants together with different combinations of these techniques integrating in CE are reviewed here and our discussions will be confined to the past three years (2008–2011).

Recent approaches in sensitive enantioseparations by CE

The latest strategies and instrumental improvements for enhancing the detection sensitivity in chiral analysis by CE are reviewed in this work. Following the previous reviews by García-Ruiz et al. (Electrophoresis 2006, 27, 195-212) and Sánchez-Hernández et al. (Electrophoresis 2008, 29, 237-251; Electrophoresis 2010, 31, 28-43), this review includes those papers that were published during the period from June 2009 to May 2011. These works describe the use of offline and online sample treatment techniques, online sample preconcentration techniques based on electrophoretic principles, and alternative detection systems to UV-Vis to increase the detection sensitivity. The application of the above-mentioned strategies, either alone or combined, to improve the sensitivity in the enantiomeric analysis of a broad range of samples, such as pharmaceutical, biological, food and environmental samples, enables to decrease the limits of detection up to 10⁻¹² M. The use of microchips to achieve sensitive chiral separations is also discussed.