Challenges of influencing cellular morphology by morphology engineering techniques and mechanical induced stress on filamentous pellet systems-A critical review

Quantification and modeling of macroparticle-induced mechanical stress for varying shake flask cultivation conditions

In biotechnological processes, filamentous microorganisms are known for their broad product spectrum and complex cellular morphology. Product formation and cellular morphology are often closely linked, requiring a well-defined level of mechanical stress to achieve high product concentrations. Macroparticles were added to shake flask cultures of the filamentous actinomycete Lentzea aerocolonigenes to find these optimal cultivation conditions. However, there is currently no model concept for the dependence of the strength and frequency of the bead-induced stress on the process parameters. Therefore, shake flask simulations were performed for combinations of bead size, bead concentration, bead density and shaking frequency. Contact analysis showed that the highest shear stresses were caused by bead-bottom contacts. Based on this, a newly generated characteristic parameter, the stress area ratio (SAR), was defined, which relates the bead wall shear and normal stresses to the total shear area. Comparison of the SAR with previous cultivation results revealed an optimum pattern for product concentration and mean product-to-biomass related yield coefficient. Thus, this model is a suitable tool for future optimization, comparison and scaling up of shear-sensitive microorganism cultivation. Finally, the simulation results were validated using high-speed recordings of the bead motion on the bottom of the shake flask.

Insights into the mechanism of mycelium transformation of Streptomyces toxytricini into pellet

Formation of the mycelial pellet in submerged cultivation of Streptomycetes is unwanted in industrial fermentation processes as it imposes mass transfer limitations, changes in the rheology of a medium, and affects the production of secondary metabolites. Though detailed information is not available about the factors involved in regulating mycelial morphology, it is studied that culture conditions and the genetic information of strain play a crucial role. Moreover, the proteomic study has revealed the involvement of low molecular weight proteins such as; DivIVA, FilP, ParA, Scy, and SsgA proteins in apical growth and branching of hyphae, which results in the establishment of the mycelial network. The present study proposes the mechanism of pellet formation of Streptomyces toxytricini (NRRL B-5426) with the help of microscopic and proteomic analysis. The microscopic analysis revealed that growing hyphae contain a bud-like structure behind the apical tip, which follows a certain organized path of growth and branching, which was further converted into the pellet when shake flask to the shake flask inoculation was performed. Proteomic analysis revealed the production of low molecular weight proteins ranging between 20 and 95 kDa, which are involved in apical growth and hyphae branching and can possibly participate in the regulation of pellet morphology.

The phenomenon of strain degeneration in biotechnologically relevant fungi

Fungi are widely exploited for large-scale production in the biotechnological industry to produce a diverse range of substances due to their versatility and relative ease of growing on various substrates. The occurrence of a phenomenon-the so-called fungal strain degeneration-leads to the spontaneous loss or decline of production capacity and results in an economic loss on a tremendous scale. Some of the most commonly applied genera of fungi in the biotechnical industry, such as Aspergillus, Trichoderma, and Penicillium, are threatened by this phenomenon. Although fungal degeneration has been known for almost a century, the phenomenon and its underlying mechanisms still need to be understood. The proposed mechanisms causing fungi to degenerate can be of genetic or epigenetic origin. Other factors, such as culture conditions, stress, or aging, were also reported to have an influence. This mini-review addresses the topic of fungal degeneration by describing examples of productivity losses in biotechnical processes using Aspergillus niger, Aspergillus oryzae, Trichoderma reesei, and Penicillium chrysogenum. Further, potential reasons, circumvention, and prevention methods are discussed. This is the first mini-review which provides a comprehensive overview on this phenomenon in biotechnologically used fungi, and it also includes a collection of strategies that can be useful to minimize economic losses which can arise from strain degeneration. KEY POINTS: • Spontaneous loss of productivity is evident in many fungi used in biotechnology. • The properties and mechanisms underlying this phenomenon are very versatile. • Only studying these underlying mechanisms enables the design of a tailored solution.

Genome-guided approaches and evaluation of the strategies to influence bioprocessing assisted morphological engineering of Streptomyces cell factories

Streptomyces genera serve as adaptable cell factories for secondary metabolites with various and distinctive chemical structures that are relevant to the pharmaceutical industry. Streptomyces' complex life cycle necessitated a variety of tactics to enhance metabolite production. Identification of metabolic pathways, secondary metabolite clusters, and their controls have all been accomplished using genomic methods. Besides this, bioprocess parameters were also optimized for the regulation of morphology. Kinase families were identified as key checkpoints in the metabolic manipulation (DivIVA, Scy, FilP, matAB, and AfsK) and morphology engineering of Streptomyces. This review illustrates the role of different physiological variables during fermentation in the bioeconomy coupled with genome-based molecular characterization of biomolecules responsible for secondary metabolite production at different developmental stages of the Streptomyces life cycle.

Intensification of bioprocesses with filamentous microorganisms

Many industrial biotechnological processes use filamentous microorganisms to produce platform chemicals, proteins, enzymes and natural products. Product formation is directly linked to their cellular morphology ranging from dispersed mycelia over loose clumps to compact pellets. Therefore, the adjustment and control of the filamentous cellular morphology pose major challenges for bioprocess engineering. Depending on the filamentous strain and desired product, optimal morphological shapes for achieving high product concentrations vary. However, there are currently no overarching strain- or product-related correlations to improve process understanding of filamentous production systems. The present book chapter summarizes the extensive work conducted in recent years in the field of improving product formation and thus intensifying biotechnological processes with filamentous microorganisms. The goal is to provide prospective scientists with an extensive overview of this scientifically diverse, highly interesting field of study. In the course of this, multiple examples and ideas shall facilitate the combination of their acquired expertise with promising areas of future research. Therefore, this overview describes the interdependence between filamentous cellular morphology and product formation. Moreover, the currently most frequently used experimental techniques for morphological structure elucidation will be discussed in detail. Developed strategies of morphology engineering to increase product formation by tailoring and controlling cellular morphology and thus to intensify processes with filamentous microorganisms will be comprehensively presented and discussed.

Morphology engineering for novel antibiotics: Effect of glass microparticles and soy lecithin on rebeccamycin production and cellular morphology of filamentous actinomycete Lentzea aerocolonigenes

Lentzea aerocolonigenes, as an actinomycete, is a natural producer of the antibiotic and antitumoral drug rebeccamycin. Due to the filamentous cellular morphology handling in cultivations is challenging; therefore, morphology engineering techniques are mandatory to enhance productivity. One promising approach described in the literature is the addition of mineral particles in the micrometer range to precisely adjust cellular morphology and the corresponding product synthesis (microparticle-enhanced cultivation, MPEC). Glass microparticles are introduced in this study as a novel supplementation type for bioprocess intensification in filamentous organisms. Several investigations were conducted to screen for an optimal particle setup, including particle size and concentration regarding their impact and effects on enhanced productivity, microparticle incorporation behavior into the biopellets, the viability of pellets, and morphological changes. Glass microparticles (10 g·L^-1) with a median diameter of 7.9 µm, for instance, induced an up to fourfold increase in product synthesis accompanied by overall enhanced viability of biomass. Furthermore, structural elucidations showed that biopellets isolated from MPEC tend to have lower hyphal density than unsupplemented control pellets. In this context, oxygen microprofiling was conducted to better understand how internal structural changes interwind with oxygen supply into the pellets. Here, the resulting oxygen profiles are of a contradictive trend of steeper oxygen consumption with increasing glass microparticle supplementation. Eventually, MPEC was combined with another promising cultivation strategy, the supplementation of soy lecithin (7.5 g·L^-1), to further increase the cultivation performance. A combination of both techniques in an optimized setup resulted in a rebeccamycin concentration of 213 mg·L^-1 after 10 days of cultivation, the highest value published so far for microparticle-supplemented shake flask cultivations of L. aerocolonigenes.

Optimization of l-malic acid production from acetate with Aspergillus oryzae DSM 1863 using a pH-coupled feeding strategy

Background

Malic acid, a dicarboxylic acid mainly used in the food industry, is currently produced from fossil resources. The utilization of low-cost substrates derived from biomass could render microbial processes economic. Such feedstocks, like lignocellulosic hydrolysates or condensates of fast pyrolysis, can contain high concentrations of acetic acid. Acetate is a suitable substrate for l-malic acid production with the filamentous fungus Aspergillus oryzae DSM 1863, but concentrations obtained so far are low. An advantage of this carbon source is that it can be used for pH control and simultaneous substrate supply in the form of acetic acid. In this study, we therefore aimed to enhance l-malate production from acetate with A. oryzae by applying a pH-coupled feeding strategy.

Results

In 2.5-L bioreactor fermentations, several feeding strategies were evaluated. Using a pH-coupled feed consisting of 10 M acetic acid, the malic acid concentration was increased about 5.3-fold compared to the batch process without pH control, resulting in a maximum titer of 29.53 ± 1.82 g/L after 264 h. However, it was not possible to keep both the pH and the substrate concentration constant during this fermentation. By using 10 M acetic acid set to a pH of 4.5, or with the repeated addition of NaOH, the substrate concentration could be maintained within a constant range, but these strategies did not prove beneficial as lower maximum titers and yields were obtained. Since cessation of malic acid production was observed in later fermentation stages despite carbon availability, a possible product inhibition was evaluated in shake flask cultivations. In these experiments, malate and succinate, which is a major by-product during malic acid production, were added at concentrations of up to 50 g/L, and it was found that A. oryzae is capable of organic acid production even at high product concentrations.

Conclusions

This study demonstrates that a suitable feeding strategy is necessary for efficient malic acid production from acetate. It illustrates the potential of acetate as carbon source for microbial production of the organic acid and provides useful insights which can serve as basis for further optimization.

Enhancement of functional activity and biosynthesis of exopolysaccharides in Monascus purpureus by genistein treatments

The exopolysaccharides (EPS) produced by the edible medicinal fungus Monascus purpureus (EMP) become the center of growing interest due to their techno-functional properties and their numerous applications in the food industries; however, the low EPS yields limit its application. In this study, the effect of genistein supplementation on the production, rheological and antioxidant properties of EPS by M. purpureus and its biosynthesis mechanism were explored. The results indicated that the addition of genistein (3 g/L) generated a 110% and 59% increase in the maximum mycelial biomass and EPS yield, respectively. The genistein supplementation group (G-EMP) had higher molar percentages of Xyl and Man, and significantly decreased molecule weight and particle size of EPS, which resulted in stronger antioxidant effect and cell growth promotion. Rheological analysis showed that both EMP and G-EMP demonstrated pseudoplastic fluid behavior and G-EMP exhibited strong gel-like elastic behavior (G' > G"). Furthermore, genistein not only facilitated the production of EPS by regulating cell membrane permeability, enhancing cellular respiratory metabolism and monosaccharide precursor synthesis pathways, and enhancing antioxidant enzyme activity to reduce oxidative stress damage, but also affected the composition of the monosaccharides by increasing enzyme activity in the underlying synthesis pathways. These findings expand the application of M. purpureus resources and provide a paradigm for future study of the structural and functional characteristics of EPS.

•

Genistein (3 g/L) significantly stimulate yield of biomass and exopolysaccharides (EPS) from M. purpureus.

•

The physicochemical and rheological properties of EPS were significantly changed.

•

Their antioxidant and cytoprotective effect were compared.

•

A possible mechanism for the response of genistein to increase EPS yield is proposed.

Co-cultivation of filamentous microorganisms in the presence of aluminum oxide microparticles

Abstract

In the present work, the approaches of submerged co-cultivation and microparticle-enhanced cultivation (MPEC) were combined and evaluated over the course of three case studies. The filamentous fungus Aspergillus terreus was co-cultivated with Penicillium rubens, Streptomyces rimosus, or Cerrena unicolor in shake flasks with or without the addition of aluminum oxide microparticles. The influence of microparticles on the production of lovastatin, penicillin G, oxytetracycline, and laccase in co-cultures was compared with the effects recorded for the corresponding monocultures. In addition, the quantitative analyses of morphological parameters, sugars consumption, and by-products formation were performed. The study demonstrated that the influence of microparticles on the production of a given molecule in mono- and co-culture may differ considerably, e.g., the biosynthesis of oxytetracycline was shown to be inhibited due to the presence of aluminum oxide in “A. terreus vs. S. rimosus” co-cultivation variants but not in S. rimosus monocultures. The differences were also observed regarding the morphological characteristics, e.g., the microparticles-induced changes of projected area in the co-cultures and the corresponding monocultures were not always comparable. In addition, the study showed the importance of medium composition on the outcomes of MPEC, as exemplified by lovastatin production in A. terreus monocultures. Finally, the co-cultures of A. terreus with a white-rot fungus C. unicolor were described here for the first time.

Key points

• Aluminum oxide affects secondary metabolites production in submerged co-cultures.

• Mono- and co-cultures are differently impacted by the addition of aluminum oxide.

• Effect of aluminum oxide on metabolites production depends on medium composition.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-022-12087-7.

A review on mycelial pellets as biological carriers: Wastewater treatment and recovery for resource and energy

Mycelial pellets, a new environment friendly biological carrier, have received wide attention from researchers due to porosity, stability and unique biocompatibility. In this article, the theoretical basis and mechanism of mycelial pellets as a biological carrier were analyzed from the properties of mycelial pellets and the interaction between mycelial pellets and other microorganisms. This article aims to collate and present the current application and development trend of mycelial pellets as biological carriers in wastewater treatment, resource and energy recovery, especially the symbiotic particle system formed by mycelial pellets and microalgae is an important way to break through the technical bottleneck of biodiesel recovery from wastewater. This review also analyzes the research hotspots and trends of mycelial pellets as carriers in recent years, discusses the challenges faced by this technology, and puts forward corresponding solutions.

Biosynthesis and polyketide oxidation of Monascus red pigments in an integrated fermentation system with microparticles and surfactants

Monascus red pigments are widely used in the food industry, mainly as intracellular red pigments. The low yields of extracellular red pigments (ERPs) make them unsuitable for large-scale industrial production. Herein, a novel integrated fermentation system (IFS) consisting of sodium starch octenyl succinate and Triton X-100 was explored for increasing yield, resulting in an ERP yield of 126.7 U/mL, 82.6% higher production than controls (69.4 U/mL). Major ERP components in control fermentations were monascopyridine A and monascopyridine B, but dehydro derivatives, rubropunctamine and monascorubramine, predominated in the test fermentations, presumably due to polyketide oxidation induced by Triton X-100. Improvement of hyphal morphology, membrane permeability, respiratory activity, and gene expression for red pigment biosynthesis is likely to be critical to increase yield and change the compositions. This study provides an effective strategy to accelerate the biosynthesis and secretion of Monascus pigments.

Optimization of the production process for the anticancer lead compound illudin M: improving titers in shake-flasks

BACKGROUND

The fungal sesquiterpenes Illudin M and S are important base molecules for the development of new anticancer agents due to their strong activity against some resistant tumor cell lines. Due to nonspecific toxicity of the natural compounds, improvement of the pharmacophore is required. A semisynthetic derivative of illudin S (Irofulven) entered phase II clinical trials for the treatment of castration-resistant metastatic prostate cancer. Several semisynthetic illudin M derivatives showed increased in vitro selectivity and improved therapeutic index against certain tumor cell lines, encouraging further investigation. This requires a sustainable supply of the natural compound, which is produced by Basidiomycota of the genus Omphalotus. We aimed to develop a robust biotechnological process to deliver illudin M in quantities sufficient to support medicinal chemistry studies and future preclinical and clinical development. In this study, we report the initial steps towards this goal.

RESULTS

After establishing analytical workflows, different culture media and commercially available Omphalotus strains were screened for the production of illudin M.Omphalotus nidiformis cultivated in a medium containing corn steep solids reached ~ 38 mg L-1 setting the starting point for optimization. Improved seed preparation in combination with a simplified medium (glucose 13.5 g L-1; corn steep solids 7.0 g L- 1; Dox broth modified 35 mL), reduced cultivation time and enhanced titers significantly (~ 400 mg L-1). Based on a reproducible cultivation method, a feeding strategy was developed considering potential biosynthetic bottlenecks. Acetate and glucose were fed at 96 h (8.0 g L-1) and 120 h (6.0 g L-1) respectively, which resulted in final illudin M titer of ~ 940 mg L-1 after eight days. This is a 25 fold increase compared to the initial titer.

CONCLUSION

After strict standardization of seed-preparation and cultivation parameters, a combination of experimental design, empirical trials and additional supply of limiting biosynthetic precursors, led to a highly reproducible process in shake flasks with high titers of illudin M. These findings are the base for further work towards a scalable biotechnological process for a stable illudin M supply.

From spores to fungal pellets: a new high throughput image analysis highlights the structural development of Aspergillus niger

Many filamentous fungi are exploited as cell factories in biotechnology. Cultivated under industrially relevant submerged conditions, filamentous fungi can adopt different macromorphologies ranging from dispersed mycelia over loose clumps to pellets. Central to the development of a pellet morphology is the agglomeration of spores after inoculation followed by spore germination and outgrowth into a pellet population which is usually very heterogeneous. As the dynamics underlying population heterogeneity are not yet fully understood, we present here a new high-throughput image analysis pipeline based on stereomicroscopy to comprehensively assess the developmental program starting from germination up to pellet formation. To demonstrate the potential of this pipeline, we used data from 44 sampling times harvested during a 48 h submerged batch cultivation of the fungal cell factory Aspergillus niger. The analysis of up to 1700 spore agglomerates and 1500 pellets per sampling time allowed the precise tracking of the morphological development of the overall culture. The data gained were used to calculate size distributions and area fractions of spores, spore agglomerates, spore agglomerates within pellets, pellets, and dispersed mycelia. This approach eventually enables the quantification of culture heterogeneities and pellet breakage. This article is protected by copyright. All rights reserved.

Stimulating mechanism of corn oil on biomass and polysaccharide production of Pleurotus tuber-regium mycelium

Hyperbranched polysaccharides (HBPSs) are the main components in cell wall and exopolysaccharide (EPS) of Pleurotus tuber-regium. To enhance the yield of these macromolecules, corn oil at 4% addition exhibited the best effect for production of mycelial biomass at 20.49 g/L and EPS at 0.59 g/L, which was 2.56 folds and 1.90 folds of the control, respectively. The treated hyphae were much thicker with smooth surface, while its cell wall content (43.81 ± 0.02%) was 1.96 times of the control (22.34 ± 0.01%). Moreover, a large number of lipid droplets could be visualized under the view of confocal laser scanning microscopy (CLSM). RNA-seq analysis revealed that corn oil could enter the cells and result in the up-regulation of genes on cell morphology and membrane permeability, as well as the down-regulation on expression level of polysaccharide hydrolase and genes involved in the MAPK pathway, all of which probably contribute to the increase of polysaccharides production.

Characterization of Bioactivities and Biosynthesis of Angucycline/Angucyclinone Derivatives Derived from Gephyromycinifex aptenodytis gen. nov., sp. nov

Strain NJES-13^T is the type strain and currently the only species of the newly established actinobacteria genera Aptenodytes in the family Dermatophilaceae isolated from the gut microbiota of the Antarctic emperor penguin. This strain demonstrated excellent bioflocculation activity with bacteria-derived exopolysaccharides (EPSs). Moreover, it produced bioactive angucycline/angucyclinone derivatives (ADs) and contained one type III polyketide synthase (T3PKS), thus demonstrating great potential to produce novel bioactive compounds. However, the low productivity of the potential new AD metabolite was the main obstacle for its chemical structure elucidation. In this study, to increase the concentration of targeted metabolites, the influence of cellular morphology on AD metabolism in strain NJES-13^T was determined using glass bead-enhanced fermentation. Based on the cellular ultra-structural observation driven by bacterial EPSs, and quantitative analysis of the targeted metabolites, the successful increasing of the productivity of three AD metabolites was achieved. Afterward, a new frigocyclinone analogue was isolated and then identified as 2-hydroxy-frigocyclinone, as well as two other known ADs named 2-hydroxy-tetrangomycin (2-HT) and gephyromycin (GPM). Three AD metabolites were found to demonstrate different bioactivities. Both C-2 hydroxyl substitutes, 2-hydroxy-tetrangomycin and 2-hydroxy-frigocyclinone, exhibited variable inhibitory activities against Staphylococcus aureus, Bacillus subtilis and Candida albicans. Moreover, the newly identified 2-hydroxy-frigocyclinone also showed significant cytotoxicity against three tested human-derived cancerous cell lines (HL-60, Bel-7402 and A549), with all obtained IC₅₀ values less than 10 µM. Based on the genetic analysis after genomic mining, the plausible biogenetic pathway of the three bioactive ADs in strain NJES-13^T was also proposed.

Effects and interactions of metal oxides in microparticle-enhanced cultivation of filamentous microorganisms

Filamentous microorganisms are used as molecular factories in industrial biotechnology. In 2007, a new approach to improve productivity in submerged cultivation was introduced: microparticle-enhanced cultivation (MPEC). Since then, numerous studies have investigated the influence of microparticles on the cultivation. Most studies considered MPEC a morphology engineering approach, in which altered morphology results in increased productivity. But sometimes similar morphological changes lead to decreased productivity, suggesting that this hypothesis is not a sufficient explanation for the effects of microparticles. Effects of surface chemistry on particles were paid little attention, as particles were often considered chemically-inert and bioinert. However, metal oxide particles strongly interact with their environment. This review links morphological, physical, and chemical properties of microparticles with effects on culture broth, filamentous morphology, and molecular biology. More precisely, surface chemistry effects of metal oxide particles lead to ion leaching, adsorption of enzymes, and generation of reactive oxygen species. Therefore, microparticles interfere with gene regulation, metabolism, and activity of enzymes. To enhance the understanding of microparticle-based morphology engineering, further interactions between particles and cells are elaborated. The presented description of phenomena occurring in MPEC eases the targeted choice of microparticles, and thus, contributes to improving the productivity of microbial cultivation technology.

Enhanced Oxytetracycline Production by Streptomyces rimosus in Submerged Co-Cultures with Streptomyces noursei

In the present study, Streptomyces rimosus was confronted with Streptomyces noursei, Penicillium rubens, Aspergillus niger, Chaetomium globosum, or Mucor racemosus in two-species submerged co-cultures in shake flasks with the goal of evaluating the oxytetracycline production and morphological development. The co-culture of S. rimosus with S. noursei exhibited stimulation in oxytetracycline biosynthesis compared with the S. rimosus monoculture, whereas the presence of M. racemosus resulted in a delay in antibiotic production. Different strategies of initiating the “S. rimosus + S. noursei” co-cultures were tested. The improvement in terms of oxytetracycline titers was recorded in the cases where S. noursei was co-inoculated with S. rimosus in the form of spores. As the observed morphological changes were not unique to the co-culture involving S. noursei, there was no evidence that the improvement of oxytetracycline levels could be attributed mainly to morphology-related characteristics.

Sodium starch octenyl succinate facilitated the production of water-soluble yellow pigments in Monascus ruber fermentation

Natural water-soluble Monascus pigments (WSMPs) have been in increasing demand but have not been able to achieve industrial production due to the low production rate. This study aimed to improve the biosynthesis and secretion of extracellular yellow pigments (EYPs) through submerged fermentation with Monascus ruber CGMCC 10,910 supplemented with sodium starch octenyl succinate (OSA-SNa). The results demonstrated that the yield was 69.68% and 48.89% higher than that without OSA-SNa in conventional fermentation (CF) and extractive fermentation (EF), respectively. The mainly increased EYP components were Y3 and Y4 in CF, but they were mainly Y1 and Y2 as well as secreted intracellular pigments, including Y5, Y6, O1, and O2, in EF. Scanning electron microscopy analysis revealed that the mycelium presented an uneven surface profile with obvious wrinkles and small fragments with OSA-SNa. It was found that a higher unsaturated/saturated fatty acids ratio in the cell membrane resulted in increased permeability and facilitated the export of intracellular yellow pigments into the broth with OSA-SNa treatment. In addition, a higher NAD⁺/NADH ratio and glucose-6-phosphate dehydrogenase activity provided a reducing condition for yellow pigment biosynthesis. Gene expression analysis showed that the expression levels of the key genes for yellow pigment biosynthesis were significantly upregulated by OSA-SNa. This study provides an effective strategy to promote the production of WSMPs by microparticle-enhanced cultivation using OSA-SNa. KEY POINTS: • OSA-SNa addition facilitated the production of Monascus yellow pigments. • Mycelial morphology and membrane permeability were affected by OSA-SNa. • The key gene expression of yellow pigments was upregulated.

Understanding and controlling filamentous growth of fungal cell factories: novel tools and opportunities for targeted morphology engineering

Filamentous fungal cell factories are efficient producers of platform chemicals, proteins, enzymes and natural products. Stirred-tank bioreactors up to a scale of several hundred m³ are commonly used for their cultivation. Fungal hyphae self-assemble into various cellular macromorphologies ranging from dispersed mycelia, loose clumps, to compact pellets. Development of these macromorphologies is so far unpredictable but strongly impacts productivities of fungal bioprocesses. Depending on the strain and the desired product, the morphological forms vary, but no strain- or product-related correlations currently exist to improve process understanding of fungal production systems. However, novel genomic, genetic, metabolic, imaging and modelling tools have recently been established that will provide fundamental new insights into filamentous fungal growth and how it is balanced with product formation. In this primer, these tools will be highlighted and their revolutionary impact on rational morphology engineering and bioprocess control will be discussed.

Microparticles enhance the formation of seven major classes of natural products in native and metabolically engineered actinobacteria through accelerated morphological development

Actinobacteria provide a rich spectrum of bioactive natural products and therefore display an invaluable source towards commercially valuable pharmaceuticals and agrochemicals. Here, we studied the use of inorganic talc microparticles (hydrous magnesium silicate, 3MgO·4SiO₂ ·H₂ O, 10 µm) as a general supplement to enhance natural product formation in this important class of bacteria. Added to cultures of recombinant Streptomyces lividans, talc enhanced production of the macrocyclic peptide antibiotic bottromycin A2 and its methylated derivative Met-bottromycin A2 up to 109 mg L^-1 , the highest titer reported so far. Hereby, the microparticles fundamentally affected metabolism. With 10 g L^-1 talc, S. lividans grew to 40% smaller pellets and, using RNA sequencing, revealed accelerated morphogenesis and aging, indicated by early upregulation of developmental regulator genes such as ssgA, ssgB, wblA, sigN, and bldN. Furthermore, the microparticles re-balanced the expression of individual bottromycin cluster genes, resulting in a higher macrocyclization efficiency at the level of BotAH and correspondingly lower levels of non-cyclized shunt by-products, driving the production of mature bottromycin. Testing a variety of Streptomyces species, talc addition resulted in up to 13-fold higher titers for the RiPPs bottromycin and cinnamycin, the alkaloid undecylprodigiosin, the polyketide pamamycin, the tetracycline-type oxytetracycline, and the anthramycin-analogs usabamycins. Moreover, talc addition boosted production in other actinobacteria, outside of the genus of Streptomyces: vancomycin (Amycolatopsis japonicum DSM 44213), teicoplanin (Actinoplanes teichomyceticus ATCC 31121), and the angucyclinone-type antibiotic simocyclinone (Kitasatospora sp.). For teicoplanin, the microparticles were even crucial to activate production. Taken together, the use of talc was beneficial in 75% of all tested cases and optimized natural and heterologous hosts forming the substance of interest with clusters under native and synthetic control. Given its simplicity and broad benefits, microparticle-supplementation appears as an enabling technology in natural product research of these most important microbes.