Magnetically enhanced insulin release in diabetic rats

Supramolecular interaction in the action of drug delivery systems

Complex diseases and diverse clinical needs necessitate drug delivery systems (DDSs), yet the current performance of DDSs is far from ideal. Supramolecular interactions play a pivotal role in various aspects of drug delivery, encompassing biocompatibility, drug loading, stability, crossing biological barriers, targeting, and controlled release. Nevertheless, despite having some understanding of the role of supramolecular interactions in drug delivery, their incorporation is frequently overlooked in the design and development of DDSs. This perspective provides a brief analysis of the involved supramolecular interactions in the action of drug delivery, with a primary emphasis on the DDSs employed in the clinic, mainly liposomes and polymers, and recognized phenomena in research, such as the protein corona. The supramolecular interactions implicated in various aspects of drug delivery systems, including biocompatibility, drug loading, stability, spatiotemporal distribution, and controlled release, were individually analyzed and discussed. This perspective aims to trigger a comprehensive and systematic consideration of supramolecular interactions in the further development of DDSs. Supramolecular interactions embody the true essence of the interplay between the majority of DDSs and biological systems.

A Detailed Review on Synthesis, Functionalization, Application, Challenges, and Current Status of Magnetic Nanoparticles in the Field of Drug Delivery and Gene Delivery System

For progression of health care system, it has always been a challenge to the researchers for formulation to a type of advanced drug delivery system which will have less toxicity, targeted delivery and will be highly biodegradable. Nano science or nanotechnology has been validated to be a successful method as of targeting the drug to its active site be due to its special physicochemical properties and size thereby reducing the dose of administration, increasing bioavailability, and also reducing toxicity. Magnetic nanoparticles recently in few decades have proved as an effective advanced drug delivery system for its elevated magnetic responsiveness, biocompatibility, elevated targeted drug delivery effectiveness, etc. The drug can be easily targeted to active site by application of external magnetic field. Among the various elements, nanoparticles prepared with magnetically active iron oxide or other iron-based spinel oxide nanoparticles are widely used due to its high electrical resistivity, mechanical hardness, chemical stability, etc. Owing to their easy execution towards drug delivery application, extensive research has been carried out in this area. This review paper has summarized all recent modifications of iron-based magnetically active nanoparticle based drug delivery system along with their synthesis, characterization, and applications.

Magneto-Mechanically Triggered Thick Films for Drug Delivery Micropumps

Given the demanding use of controlled drug delivery systems, our attention was focused on developing a magnetic film that can be triggered in the presence of a magnetic field for both drug delivery and the actuating mechanism in micropump biomedical microelectromechanical systems (BioMEMS). Magnetic alginate films were fabricated in three steps: the co-precipitation of iron salts in an alkaline environment to obtain magnetite nanoparticles (Fe₃O₄), the mixing of the obtained nanoparticles with a sodium alginate solution containing glycerol as a plasticizer and folic acid as an active substance, and finally the casting of the final solution in a Petri dish followed by cross-linking with calcium chloride solution. Magnetite nanoparticles were incorporated in the alginate matrix because of the well-established biocompatibility of both materials, a property that would make the film convenient for implantable BioMEMS devices. The obtained film was analyzed in terms of its magnetic, structural, and morphological properties. To demonstrate the hypothesis that the magnetic field can be used to trigger drug release from the films, we studied the release profile in an aqueous medium (pH = 8) using a NdFeB magnet as a triggering factor.

Engineered Magnetic Nanocomposites to Modulate Cellular Function

Magnetic nanoparticles (MNPs) have various applications in biomedicine, including imaging, drug delivery and release, genetic modification, cell guidance, and patterning. By combining MNPs with polymers, magnetic nanocomposites (MNCs) with diverse morphologies (core-shell particles, matrix-dispersed particles, microspheres, etc.) can be generated. These MNCs retain the ability of MNPs to be controlled remotely using external magnetic fields. While the effects of these biomaterials on the cell biology are still poorly understood, such information can help the biophysical modulation of various cellular functions, including proliferation, adhesion, and differentiation. After recalling the basic properties of MNPs and polymers, and describing their coassembly into nanocomposites, this review focuses on how polymeric MNCs can be used in several ways to affect cell behavior. A special emphasis is given to 3D cell culture models and transplantable grafts, which are used for regenerative medicine, underlining the impact of MNCs in regulating stem cell differentiation and engineering living tissues. Recent advances in the use of MNCs for tissue regeneration are critically discussed, particularly with regard to their prospective involvement in human therapy and in the construction of advanced functional materials such as magnetically operated biomedical robots.

Review of Recent Advances and Their Improvement in the Effectiveness of Hydrogel-Based Targeted Drug Delivery: A Hope for Treating Cancer

Using hydrogels for delivering cancer therapeutics is advantageous in pharmaceutical usage as they have an edge over traditional delivery, which is tainted due to the risk of toxicity that it imbues. Hydrogel usage leads to the development of a more controlled drug release system owing to its amenability for structural metamorphosis, its higher porosity to seat the drug molecules, and its ability to shield the drug from denaturation. The thing that makes its utility even more enhanced is that they make themselves more recognizable to the body tissues and hence can stay inside the body for a longer time, enhancing the efficiency of the delivery, which otherwise is negatively affected since the drug is identified by the human immunity as a foreign substance, and thus, an attack of the immunity begins on the drug injected. A variety of hydrogels such as thermosensitive, pH-sensitive, and magnetism-responsive hydrogels have been included and their potential usage in drug delivery has been discussed in this review that aims to present recent studies on hydrogels that respond to alterations under a variety of circumstances in "reducing" situations that mimic the microenvironment of cancerous cells.

Physically Switchable Antimicrobial Surfaces and Coatings: General Concept and Recent Achievements

Bacterial environmental colonization and subsequent biofilm formation on surfaces represents a significant and alarming problem in various fields, ranging from contamination of medical devices up to safe food packaging. Therefore, the development of surfaces resistant to bacterial colonization is a challenging and actively solved task. In this field, the current promising direction is the design and creation of nanostructured smart surfaces with on-demand activated amicrobial protection. Various surface activation methods have been described recently. In this review article, we focused on the "physical" activation of nanostructured surfaces. In the first part of the review, we briefly describe the basic principles and common approaches of external stimulus application and surface activation, including the temperature-, light-, electric- or magnetic-field-based surface triggering, as well as mechanically induced surface antimicrobial protection. In the latter part, the recent achievements in the field of smart antimicrobial surfaces with physical activation are discussed, with special attention on multiresponsive or multifunctional physically activated coatings. In particular, we mainly discussed the multistimuli surface triggering, which ensures a better degree of surface properties control, as well as simultaneous utilization of several strategies for surface protection, based on a principally different mechanism of antimicrobial action. We also mentioned several recent trends, including the development of the to-detect and to-kill hybrid approach, which ensures the surface activation in a right place at a right time.

Effects of DC Magnetic Fields on Magnetoliposomes

The potential use of magnetic nanoparticles (MNPs) in biomedicine as magnetic resonance, drug delivery, imagenology, hyperthermia, biosensors, and biological separation has been studied in different laboratories. One of the challenges on MNP elaboration for biological applications is the size, biocompatibility, heat efficiency, stabilization in physiological conditions, and surface coating. Magnetoliposome (ML), a lipid bilayer of phospholipids encapsulating MNPs, is a system used to reduce toxicity. Encapsulated MNPs can be used as a potential drug and a gene delivery system, and in the presence of magnetic fields, MLs can be accumulated in a target tissue by a strong gradient magnetic field. Here, we present a study of the effects of DC magnetic fields on encapsulated MNPs inside liposomes. Despite their widespread applications in biotechnology and environmental, biomedical, and materials science, the effects of magnetic fields on MLs are unclear. We use a modified coprecipitation method to synthesize superparamagnetic nanoparticles (SNPs) in aqueous solutions. The SNPs are encapsulated inside phospholipid liposomes to study the interaction between phospholipids and SNPs. Material characterization of SNPs reveals round-shaped nanoparticles with an average size of 12 nm, mainly magnetite. MLs were prepared by the rehydration method. After formation, we found two types of MLs: one type is tense with SNPs encapsulated and the other is a floppy vesicle that does not show the presence of SNPs. To study the response of MLs to an applied DC magnetic field, we used a homemade chamber. Digitalized images show encapsulated SNPs assembled in chain formation when a DC magnetic field is applied. When the magnetic field is switched off, it completely disperses SNPs. Floppy MLs deform along the direction of the external applied magnetic field. Solving the relevant magnetostatic equations, we present a theoretical model to explain the ML deformations by analyzing the forces exerted by the magnetic field over the surface of the spheroidal liposome. Tangential magnetic forces acting on the ML surface result in a press force deforming MLs. The type of deformations will depend on the magnetic properties of the mediums inside and outside the MLs. The model predicts a coexistence region of oblate-prolate deformation in the zone where χ = 1. We can understand the chain formation in terms of a dipole-dipole interaction of SNP.

Role of insulin/glucagon ratio and cell redox state in the hyperglycaemia induced by exposure to a 60-Hz magnetic field in rats

The exposure to extremely low-frequency electromagnetic fields (EMFs) could adversely affect the endocrine system and cellular proliferative response. Nonetheless, the use of 60-Hz EMFs in the form of magneto-therapy exerts beneficial actions on human health but can also induce hyperglycaemia. Therefore, the present study was aimed to search for metabolic responses of fed or fasted male rats to a single EMF exposure. We performed a 15 min-single exposure to 60-Hz (3.8 mT, intensity) EMF, and determined serum levels of glucose, lipids, and indicators of cellular redox state and energy parameters. A single exposure to a 60-Hz EMF induced hyperglycaemia in both animal groups, and an attenuated second serum insulin peak. The 60-Hz EMF also decreased free fatty acids and lactate serum levels, oppositely increasing pyruvate and acetoacetate levels. Significant increases in blood glucose level and rat’s glucose metabolism were related to a more oxidized cellular redox state and variations in insulin and glucagon secretion. The 60-Hz EMF’s effects were not modified in animals previously subjected to chronic EMFs exposure (14 days). In conclusion, increased serum glucose levels and glucose metabolism induced by a single 60-Hz EMF exposure were closely related to the cellular redox state and the insulin/glucagon ratio.

Protective Effects of Moderate Intensity Static Magnetic Fields on Diabetic Mice

The purpose of this study was to investigate the effects of moderate-intensity static magnetic field (SMF) on diabetic mice. We studied the effects of SMF on blood glucose of normal mice by starch tolerance and glucose tolerance tests. Then, we evaluated the effects of SMF on blood glucose of diabetic mice by establishing alloxan-induced type 1 diabetic mice and high-fat diet + streptozotocin (STZ)-induced type 2 diabetic mice. The results showed that different magnetic field intensities and blank control did not affect the blood glucose of normal mice. After starch and glucose administration, different magnetic fields could improve the glucose tolerance of normal mice, and this was obvious in the 600 mT group. In the experiment of type 1 diabetic mice induced by alloxan, the results showed that different magnetic field intensities could improve the starch tolerance of mice, and that in the 400 mT group was obvious. In the experiment of type 2 diabetic mice induced by a high-fat diet + STZ, the 400 mT group could reduce food intake and water consumption in the later period. The 600 mT group could improve the starch tolerance of mice. The 400 and 600 mT groups could reduce fasting blood glucose. At the same time, total cholesterol and triglyceride decreased in different magnetic field intensities, and the 600 mT group could significantly increase the serum insulin content of mice. In summary, the results of this study suggest that SMF has a protective role in diabetic mice. Bioelectromagnetics. © 2020 Bioelectromagnetics Society.

Physical triggering strategies for drug delivery

Physically triggered systems hold promise for improving drug delivery by enhancing the controllability of drug accumulation and release, lowering non-specific toxicity, and facilitating clinical translation. Several external physical stimuli including ultrasound, light, electric fields and magnetic fields have been used to control drug delivery and they share some common features such as spatial targeting, spatiotemporal control, and minimal invasiveness. At the same time, they possess several distinctive features in terms of interactions with biological entities and/or the extent of stimulus response. Here, we review the key advances of such systems with a focus on discussing their physical mechanisms, the design rationales, and translational challenges.

Magnetic Nanoparticles in Cancer Therapy and Diagnosis

There is urgency for the development of nanomaterials that can meet emerging biomedical needs. Magnetic nanoparticles (MNPs) offer high magnetic moments and surface-area-to-volume ratios that make them attractive for hyperthermia therapy of cancer and targeted drug delivery. Additionally, they can function as contrast agents for magnetic resonance imaging (MRI) and can improve the sensitivity of biosensors and diagnostic tools. Recent advancements in nanotechnology have resulted in the realization of the next generation of MNPs suitable for these and other biomedical applications. This review discusses methods utilized for the fabrication and engineering of MNPs. Recent progress in the use of MNPs for hyperthermia therapy, controlling drug release, MRI, and biosensing is also critically reviewed. Finally, challenges in the field and potential opportunities for the use of MNPs toward improving their properties are discussed.

Magnetic Stimulus Responsive DDS Based on Chitosan Microbeads Embedded with Magnetic Nanoparticles

In this paper, we have presented a novel Drug Delivery Substrate (DDS) that that is responsive to external stimuli of high-frequency alternating magnetic fields. The DDS is constituted of chitosan crosslinked with PEGDMA (polyethylene glycol dimethacrylate), loaded with Fe₃O₄ magnetic nanoparticles and vancomycin. In another experiment, a 19-hour elution was observed where three magnetic stimuli of 25 mT, 109.9 kHz were given for 60 min to the test samples. The stimuli were separated by several hours. After excitation span, it was observed that the stimulated samples released a significantly higher amount of vancomycin by as much as 21% compared to non-stimulated samples. In another study, preliminary results showing the effect of different PEGDMA chain lengths have been discussed. These results show evidence of a smart, controllable DDS that allows modulation of its normal passive antibiotic elution by applying external stimuli per personalized needs.

Microfluidic Synthesis of Vinblastine-Loaded Multifunctional Particles for Magnetically Responsive Controlled Drug Release

Vinblastine (VBL) is a major chemotherapeutic drug; however, in some cases, it may cause severe side effects in patients with cancer. Designing a novel VBL pharmaceutical formulation is a crucial and emerging concern among researchers for reducing the use of VBL. This study developed a stimuli-responsive controlled VBL drug release system from magnetically sensitive chitosan capsules. A magnetically responsive controlled drug release system was designed by embedding superparamagnetic iron oxide (SPIO) nanoparticles (NPs) in a chitosan matrix and an external magnet. In addition, droplet microfluidics, which is a novel technique for producing polymer spheres, was used for manufacturing monodispersed chitosan microparticles. The prepared VBL and SPIO NPs-loaded chitosan microparticles were characterized and analyzed using Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, a superconducting quantum interference device, and a biocompatibility test. The drug encapsulation efficiency was 67%-69%. The in vitro drug release test indicated that the VBL could be 100% released from chitosan composite particles in 80-130 min under magnetic stimulation. The pulsatile magnetically triggered tests showed individual and distinctive controlled release patterns. Thus, the timing and dose of VBL release was controllable by an external magnet. The results presume that using a magnetically responsive controlled drug release system offers a valuable opportunity for VBL drug delivery, where the delivery system is an active participant, rather than a passive vehicle, in the optimization of cancer treatment. The proposed actively targeted magnetic drug delivery system offers many advantages over conventional drug delivery systems by improving the precision and timing of drug release, easy operation, and higher compliance for pharmaceutical applications.

Strategies for improving diabetic therapy via alternative administration routes that involve stimuli-responsive insulin-delivering systems

The encapsulation of insulin in micro- or nanodelivery systems may eliminate the need for frequent subcutaneous injections, improving the quality of life of diabetic patients. Formulations for oral, intranasal, pulmonary, subcutaneous, and transdermal administration have been developed. The use of stimuli-responsive polymeric carriers that can release the encapsulated drug in response to changes of the environmental stimuli or external activation enables the design of less invasive or non-invasive systems for smart insulin delivery from depots in the body. This article will look at strategies for the development of responsive delivery systems and the future meeting of the demands of new modes of insulin delivery.

Chemical modification of proteins with photocleavable groups

In this work, we describe methods for synthesizing and incorporating a wide range of photocleavable groups into proteins. These are based on the di-methoxyl nitro phenyl ethyl (DMNPE) group. Using a common ketone starting material, we have modified the DMNPE core with different peptides and small molecules. We describe how these can be incorporated into DMNPE either by solution or solid phase methods. In addition, we show how the ketone group can be effectively converted into a hydrazone group and ultimately into a diazo. The potential pitfall of azine formation is also delineated, as are the strategies for avoiding this side product. We then show how these modified diazo groups can then be reacted with the carboxyl groups of the protein to make the final ester product. Finally, we show how the ultimate product can be purified, and the products identified using 280 and 345nm ratios, as well as ESI-MS characterization. The combined methods should allow the incorporation of many possible photocleavable groups into a range of proteins, and allow the ultimate properties of the modified protein to be subsequently toggled with light.

Tough Magnetic Chitosan Hydrogel Nanocomposites for Remotely Stimulated Drug Release

As one of important biomaterials for localized drug delivery system, chitosan hydrogel still suffer several challenges, including poor mechanical properties, passive drug release behavior and lack of remote stimuli response. To address these challenges, a facile in situ hybridization method was reported for fabricate tough magnetic chitosan hydrogel (MCH), which remotely switched drug release from passive release to pulsatile release under a low frequency alternating magnetic field (LAMF). The in situ hybridization method avoided the aggregation of magnetic nanoparticles (MNPs) in hydrogel, which simultaneously brings 416% and 265% increase in strength and elastic modulus, respectively. The mechanical property enhancement was contributed by the physical crosslinking of in situ synthesized MNPs. When a LAMF with 15 min ON-15 min OFF cycles was applied to MCH, the fraction release showed zigzag shape and pulsatile release behavior with quick response. The cumulative release and fraction release of drug from MCH were improved by 67.2% and 31.9%, respectively. MTT results and cell morphology indicated that the MCH have excellent biocompatibility and no acute adverse effect on MG-63 cells. The developed tough MCH system holds great potential for applications in smart drug release system with noninvasive characteristics and magnetic field stimulated drug release behavior.

Pulsatile Chemotherapeutic Delivery Profiles Using Magnetically Responsive Hydrogels

Pulsatile chemotherapeutic delivery profiles may provide a number advantages by maximizing the anticancer toxicity of chemotherapeutics, reducing off-target side effects, and combating adaptive resistance. While these temporally dynamic deliveries have shown some promise, they have yet to be clinically deployed from implantable hydrogels, whose localized deliveries could further enhance therapeutic outcomes. Here, several pulsatile chemotherapeutic delivery profiles were tested on melanoma cell survival in vitro and compared to constant (flatline) delivery profiles of the same integrated dose. Results indicated that pulsatile delivery profiles were more efficient at killing melanoma cells than flatline deliveries. Furthermore, results suggested that parameters like the duration of drug “on” periods (pulse width), delivery rates during those periods (pulse heights), and the number/frequency of pulses could be used to optimize delivery profiles. Optimization of pulsatile profiles at tumor sites in vivo would require hydrogel materials capable of producing a wide variety of pulsatile profiles (e.g., of different pulse heights, pulse widths, and pulse numbers). This work goes on to demonstrate that magnetically responsive, biphasic ferrogels are capable of producing pulsatile mitoxantrone delivery profiles similar to those tested in vitro. Pulse parameters such as the timing and rate of delivery during “on” periods could be remotely regulated through the use of simple, hand-held magnets. The timing of pulses was controlled simply by deciding when and for how long to magnetically stimulate. The rate of release during pulse “on” periods was a function of the magnetic stimulation frequency. These findings add to the growing evidence that pulsatile chemotherapeutic delivery profiles may be therapeutically beneficial and suggest that magnetically responsive hydrogels could provide useful tools for optimizing and clinically deploying pulsatile chemotherapeutic delivery profiles.

Advances in Biomaterials for Drug Delivery

Advances in biomaterials for drug delivery are enabling significant progress in biology and medicine. Multidisciplinary collaborations between physical scientists, engineers, biologists, and clinicians generate innovative strategies and materials to treat a range of diseases. Specifically, recent advances include major breakthroughs in materials for cancer immunotherapy, autoimmune diseases, and genome editing. Here, strategies for the design and implementation of biomaterials for drug delivery are reviewed. A brief history of the biomaterials field is first established, and then commentary on RNA delivery, responsive materials development, and immunomodulation are provided. Current challenges associated with these areas as well as opportunities to address long-standing problems in biology and medicine are discussed throughout.

Responsive triggering systems for delivery in chronic wound healing

Non-communicable diseases including cancer, cardiovascular disease, diabetes, and neuropathy are chronic in nature. Treatment of these diseases with traditional delivery systems is limited due to lack of site-specificity, non-spatiotemporal release and insufficient doses. Numerous responsive delivery systems which respond to both physiological and external stimuli have been reported in the literature. However, effective strategies incorporating a multifactorial approach are required to control these complex wounds. This can be achieved by fabricating spatiotemporal release systems, multimodal systems or dual/multi-stimuli responsive delivery systems loaded with one or more bioactive components. Critically, these next generation stimuli responsive delivery systems that are at present not feasible are required to treat chronic wounds. This review provides a critical assessment of recent developments in the field of responsive delivery systems, highlighting their limitations and providing a perspective on how these challenges can be overcome.

Improved magnetic regulation of delivery profiles from ferrogels

While providing the ability to magnetically enhance delivery rates, ferrogels have not been able to produce the various types of regulated delivery profiles likely needed to direct complex biological processes. For example, magnetically triggered release after prolonged periods of payload retention have not been demonstrated and little has been accomplished towards remotely controlling release rate through alterations in the magnetic signal. Also, strategies do not exist for magnetically coordinating multi-drug sequences. The purpose of this study was to develop these capabilities through improved ferrogel design and investigating how alterations in the magnetic signal impact release characteristics. Results show that delivery rate can be remotely regulated using the frequency of magnetic stimulation. When using an optimized biphasic ferrogel design, stimulation at optimized frequencies enabled magnetically triggered deliveries after a delay of 5 days that were 690- to 1950-fold higher than unstimulated baseline values. Also, a sequence of two payloads was produced by allowing one payload to initially diffuse out of the ferrogel, followed by magnetically triggered release of a different payload on day 5. Finally, it was demonstrated that two payloads could be sequentially triggered for release by first stimulating at a frequency tuned to preferentially release one payload (after 24 h), followed by stimulation at a different frequency tuned to preferentially release the other payload (After 4 days). The strategies developed here may expand the utility of ferrogels in clinical scenarios where the timing and sequence of biological events can be tuned to optimize therapeutic outcome.

Synthesis, Functionalization, and Design of Magnetic Nanoparticles for Theranostic Applications

In order to translate nanotechnology into medical practice, magnetic nanoparticles (MNPs) have been presented as a class of non-invasive nanomaterials for numerous biomedical applications. In particular, MNPs have opened a door for simultaneous diagnosis and brisk treatment of diseases in the form of theranostic agents. This review highlights the recent advances in preparation and utilization of MNPs from the synthesis and functionalization steps to the final design consideration in evading the body immune system for therapeutic and diagnostic applications with addressing the most recent examples of the literature in each section. This study provides a conceptual framework of a wide range of synthetic routes classified mainly as wet chemistry, state-of-the-art microfluidic reactors, and biogenic routes, along with the most popular coating materials to stabilize resultant MNPs. Additionally, key aspects of prolonging the half-life of MNPs via overcoming the sequential biological barriers are covered through unraveling the biophysical interactions at the bio-nano interface and giving a set of criteria to efficiently modulate MNPs' physicochemical properties. Furthermore, concepts of passive and active targeting for successful cell internalization, by respectively exploiting the unique properties of cancers and novel targeting ligands are described in detail. Finally, this study extensively covers the recent developments in magnetic drug targeting and hyperthermia as therapeutic applications of MNPs. In addition, multi-modal imaging via fusion of magnetic resonance imaging, and also innovative magnetic particle imaging with other imaging techniques for early diagnosis of diseases are extensively provided.

Magnetic stimulus responsive vancomycin drug delivery system based on chitosan microbeads embedded with magnetic nanoparticles

Local antibiotic delivery can overcome some of the shortcomings of systemic therapy, such as low local concentrations and delivery to avascular sites. A localized drug delivery system (DDS), ideally, could also use external stimuli to modulate the normal drug release profile from the DDS to provide efficacious drug administration and flexibility to healthcare providers. To achieve this objective, chitosan microbeads embedded with magnetic nanoparticles were loaded with the antibiotic vancomycin and stimulated by a high frequency alternating magnetic field. Three such stimulation sessions separated by 1.5 h were applied to each test sample. The chromatographic analysis of the supernatant from these stimulated samples showed more than approximately 200% higher release of vancomycin from the DDS after the stimulation periods compared to nonstimulated samples. A 16-day long term elution study was also conducted where the DDS was allowed to elute drug through normal diffusion over a period of 11 days and stimulated on day 12 and day 15, when vancomycin level had dropped below therapeutic levels. Magnetic stimulation boosted elution of test groups above minimum inhibitory concentration (MIC), as compared to control groups (with no stimulation) which remained below MIC. The drug release from test groups in the intervals where no stimulation was given showed similar elution behavior to control groups. These results indicate promising possibilities of controlled drug release using magnetic excitation from a biopolymer-based DDS. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2169-2176, 2018.

Magnetic Nanotransducers in Biomedicine

Owing to their abilities to identify diseased conditions, to modulate biological processes, and to control cellular activities, magnetic nanoparticles have become one of the most popular nanomaterials in the biomedical field. Targeted drug delivery, controlled drug release, hyperthermia treatment, imaging, and stimulation of several biological entities are just some of the several tasks that can be accomplished by taking advantage of magnetic nanoparticles in tandem with magnetic fields. The huge interest towards this class of nanomaterials arises from the possibility to physically drive their spatiotemporal localization inside the body, and to deliver an externally applied stimulation at a target site. They in fact behave as actual nanotransducers, converting energy stemming from the external magnetic field into heat and mechanical forces, which act as signals for therapeutic processes such as hyperthermia and controlled drug release. Magnetic nanoparticles are a noninvasive tool that enables the remote activation of biological processes, besides behaving as formidable tracers for different imaging modalities, thus allowing to simultaneously carry out diagnosis and therapy. In view of all this, owing to their multifunctional and multitasking nature, magnetic nanoparticles are already one of the most important nanotechnological protagonists in medicine and biology, enabling an actual theranostic approach in many pathological conditions. In this Concept, we first provide a brief introduction on some physical properties of magnetic materials and on important features that determine the physical properties of magnetic nanoparticles. Thereafter, we will consider some major biomedical applications: hyperthermia, drug delivery/release, and nanoparticle-mediated control of biological processes, even at subcellular level.

Repetitive on-demand drug release from polymeric matrices containing a macroscopic spherical iron core

A system for multiple on-demand drug release has been prepared that can be activated with an alternating magnetic field as external trigger. The core/shell samples have been developed based on a macroscopic spherical iron core coated with a thermoresponsive polymer, poly(styrene-stat-butyl methacrylate), containing ibuprofen as a model drug. During exposure of the samples to the magnetic field (ON state), the release rate of ibuprofen is significantly increased, up to 35 times the release rate without the magnetic field (OFF state). Using one sample or two samples in line with the magnetic field does not influence the ON/OFF ratio of the system, showing the possibility of using multiple samples to increase and tune the drug dose. Increasing the concentration of ibuprofen in the polymer layer is shown to increase the release rate in both the ON and OFF states. Increasing the size of the iron core and, consequently, decreasing the polymer thickness, was found to only increase the release rate during exposure resulting in higher ON/OFF ratios. The developed on demand drug delivery systems represents a promising development towards on demand drug delivery implants.

REFLECTIONS ON CAREER GOALS

During my chemical engineering studies, it was only during my master thesis work that I decided to continue with PhD research as I really enjoyed doing original research. When coming to the end of my PhD research under supervision of Prof. Ulrich S. Schubert, I developed the ambition to pursue an academic career. Fortunately, I got the opportunity to stay with Prof. Schubert as project leader for the Dutch Polymer Institute (DPI). Within this position, I supervised ten researchers and was able to start developing my independent research lines. Despite that I now advise students to not stay in the same laboratory, this first position allowed me to gain some initial independence and to publish a large number of papers that has been a great benefit in my further career. After two and a half years I needed a new challenge that I found by taking up a part-time position at a start-up company in Eindhoven, Dolphys Medical BV, while I also continued as part-time group leader for the DPI. As senior product developer, I was in charge of the research and learned to focus on the application rather than scientific curiosity. This experience made me realize that I prefer the freedom to do academic blue sky research and decided to fully go for an academic position. After personal discussions with some prominent professors in the Netherlands, I applied for a postdoc fellowship in the Netherlands with Prof. Roeland Nolte as well as a Humboldt fellowship in Germany with Prof. Martin Möller, which I both got. As a result, I went one year 'abroad' to Aachen and returned to Nijmegen where I intended to start my independent career. However, another opportunity came along. Via my personal network I was informed that I would make a good chance if I applied for a new professor scheme in Ghent. So I applied and the rest is history. Picture of the Supramolecular Chemistry Group (2017).

Carrageenan Based Bionanocomposites as Drug Delivery Tool with Special Emphasis on the Influence of Ferromagnetic Nanoparticles

Over the past few years, considerable attention has been focused on carrageenan based bionanocomposites due to their multifaceted properties like biodegradability, biocompatibility, and nontoxicity. Moreover, these composites can be tailored according to the desired purpose by using different nanofillers. The role of ferromagnetic nanoparticles in drug delivery is also discussed here in detail. Moreover, this article also presents a short review of recent research on the different types of the carrageenan based bionanocomposites and applications.

Photovoltaic surfaces enable clonal myoblastic cell release using visible light as external stimulation

Many new biomedical approaches to treating disease require the supply of cells delivered to an injured or diseased organ either individually, collectively as aggregates or sheets, or encapsulated with a scaffold. The collection of cells is accomplished by using enzymatic digestion witch suffer from the need to remove the enzymes after digestion. In addition, enzymatic methods are not applicable for all cells, cell aggregates, cell sheets or 3D structures. The objective of this study was to investigate the release of cultured cells from silicon based Photovoltaic (PV) surfaces using a light source as external stimulation. C2C12 myoblasts were cultured on the negative surface of a PV device and upon confluence they were exposed to light. The amount of released cells was quantified as a function light exposure. It was found that light exposure at 25,000 lux for one hour caused equivalent cell release from the PV surface than trypsination. The released cells are viable and can be re-cultured if needed. This mechanism may offer an alternative method to release excitable cells without using an enzymatic agent. This may be important for cell therapy if larger cell structures such as sheets need to be collected.

Magnetic nanoparticles and nanocomposites for remote controlled therapies

This review highlights the state-of-the-art in the application of magnetic nanoparticles (MNPs) and their composites for remote controlled therapies. Novel macro- to nano-scale systems that utilize remote controlled drug release due to actuation of MNPs by static or alternating magnetic fields and magnetic field guidance of MNPs for drug delivery applications are summarized. Recent advances in controlled energy release for thermal therapy and nanoscale energy therapy are addressed as well. Additionally, studies that utilize MNP-based thermal therapy in combination with other treatments such as chemotherapy or radiation to enhance the efficacy of the conventional treatment are discussed.

Iron oxide nanoparticles for magnetically-guided and magnetically-responsive drug delivery

In this review, we discuss the recent advances in and problems with the use of magnetically-guided and magnetically-responsive nanoparticles in drug delivery and magnetofection. In magnetically-guided nanoparticles, a constant external magnetic field is used to transport magnetic nanoparticles loaded with drugs to a specific site within the body or to increase the transfection capacity. Magnetofection is the delivery of nucleic acids under the influence of a magnetic field acting on nucleic acid vectors that are associated with magnetic nanoparticles. In magnetically-responsive nanoparticles, magnetic nanoparticles are encapsulated or embedded in a larger colloidal structure that carries a drug. In this last case, an alternating magnetic field can modify the structure of the colloid, thereby providing spatial and temporal control over drug release.

Spatial regulation of controlled bioactive factor delivery for bone tissue engineering

Limitations of current treatment options for critical size bone defects create a significant clinical need for tissue engineered bone strategies. This review describes how control over the spatiotemporal delivery of growth factors, nucleic acids, and drugs and small molecules may aid in recapitulating signals present in bone development and healing, regenerating interfaces of bone with other connective tissues, and enhancing vascularization of tissue engineered bone. State-of-the-art technologies used to create spatially controlled patterns of bioactive factors on the surfaces of materials, to build up 3D materials with patterns of signal presentation within their bulk, and to pattern bioactive factor delivery after scaffold fabrication are presented, highlighting their applications in bone tissue engineering. As these techniques improve in areas such as spatial resolution and speed of patterning, they will continue to grow in value as model systems for understanding cell responses to spatially regulated bioactive factor signal presentation in vitro, and as strategies to investigate the capacity of the defined spatial arrangement of these signals to drive bone regeneration in vivo.

Synthesis and Characterization of Gelatin-Based Magnetic Hydrogels

A simple preparation of thermoreversible gelatin-based ferrogels in water provides a constant structure defined by the crosslinking degree for gelatin contents between 6 and 18 wt%. The possibility of varying magnetite nanoparticle concentration between 20 and 70 wt% is also reported. Simulation studies hint at the suitability of collagen to bind iron and hydroxide ions, suggesting that collagen acts as a nucleation seed to iron hydroxide aggregation, and thus the intergrowth of collagen and magnetite nanoparticles already at the precursor stage. The detailed structure of the individual ferrogel components is characterized by small-angle neutron scattering (SANS) using contrast matching. The magnetite structure characterization is supplemented by small-angle X-ray scattering and microscopy only visualizing magnetite. SANS shows an unchanged gelatin structure of average mesh size larger than the nanoparticles with respect to gel concentration while the magnetite nanoparticles size of around 10 nm seems to be limited by the gel mesh size. Swelling measurements underline that magnetite acts as additional crosslinker and therefore varying the magnetic and mechanical properties of the ferrogels. Overall, the simple and variable synthesis protocol, the cheap and easy accessibility of the components as well as the biocompatibility of the gelatin-based materials suggest them for a number of applications including actuators.

Biocomputing, Biosensing and Bioactuation Based on Enzyme Biocatalyzed Reactions

The focus of this review paper is on the design and implementation of smart ‘Sense-and-Treat’ systems using enzyme-biocatalytic systems. These systems were used to perform biomolecular computing and they were functionally integrated with signal responsive materials aiming towards their biomedical use. Electrode interfaces, functionalized with signal-responsive materials, find applications in biocomputing, biosensing, and, specifically, triggered release of bioactive substances. ‘Sense-and-Treat’ systems require multiple components working together, including biosensors, actuators, and filters, in order to achieve closed-loop and autonomous operation. In general, biochemical logic networks were developed to process single biochemical or chemical inputs as well as multiple inputs, responding to nonphysiological (for concept demonstration purposes) and physiological signals (for injury detection or diagnosis). Actuation of drug-mimicking release was performed using the responsive material iron-cross-linked alginate with entrapped biomolecular species, responding to physical, chemical or biochemical signals.

Magnetic composite biomaterials for tissue engineering

We overview the latest developments of polymeric/ceramic scaffolds and hydrogels that contain magnetic particles for the improvement of tissue engineering strategies.

Microscale polymer bottles corked with a phase-change material for temperature-controlled release

Keep your wine chilled! Microscale polystyrene (PS) bottles are loaded with dye molecules and then corked with a phase-change material (PCM). When the temperature is raised beyond its melting point, the PCM quickly melts and triggers an instant release of the encapsulated dye. The release profiles can be manipulated by using a binary mixture of PCMs with different melting points.

Intravenous magnetic nanoparticle cancer hyperthermia

Magnetic nanoparticles heated by an alternating magnetic field could be used to treat cancers, either alone or in combination with radiotherapy or chemotherapy. However, direct intratumoral injections suffer from tumor incongruence and invasiveness, typically leaving undertreated regions, which lead to cancer regrowth. Intravenous injection more faithfully loads tumors, but, so far, it has been difficult achieving the necessary concentration in tumors before systemic toxicity occurs. Here, we describe use of a magnetic nanoparticle that, with a well-tolerated intravenous dose, achieved a tumor concentration of 1.9 mg Fe/g tumor in a subcutaneous squamous cell carcinoma mouse model, with a tumor to non-tumor ratio > 16. With an applied field of 38 kA/m at 980 kHz, tumors could be heated to 60°C in 2 minutes, durably ablating them with millimeter (mm) precision, leaving surrounding tissue intact.

Magnetic-responsive Nanoparticles for Drug Delivery

Controlled drug release, especially stimuli-responsive drug-delivery systems, has received great attention worldwide. Compared to other triggering agents that require a physical or chemical contact, magnetic field permits a non-contact, remotely manageable control of the site and rate of the release, which is highly advantageous for clinical applications. Magnetic nanoparticles display some excellent advantages, such as magnetic-guiding, magnetic resonance image (MRI), hyperthermia and magnetic-triggered drug release upon a simple “on” and “off” magnetic switch mode. Therefore, magnetic-sensitive drug nanocarriers can be considered as a new biomedical nanoplatform for disease diagnosis and therapy. In this chapter, the physical basis of the effects of the magnetic field on magnetic nanocolloid solutions, the synthesis of magnetic nanoparticles and of nanostructures containing the magnetic nanoparticles (e.g. micelles, polymersomes, organic and inorganic networks) is described, and some relevant applications, including in vivo tests, for drug delivery in cancer, epilepsy and gene therapy, among others, are discussed.

Magnetic field activated lipid-polymer hybrid nanoparticles for stimuli-responsive drug release

Stimuli-responsive nanoparticles (SRNPs) offer the potential of enhancing the therapeutic efficacy and minimizing the side-effects of chemotherapeutics by controllably releasing the encapsulated drug at the target site. Currently controlled drug release through external activation remains a major challenge during the delivery of therapeutic agents. Here we report a lipid-polymer hybrid nanoparticle system containing magnetic beads for stimuli-responsive drug release using a remote radio frequency (RF) magnetic field. These hybrid nanoparticles show long-term stability in terms of particle size and polydispersity index in phosphate-buffered saline (PBS). Controllable loading of camptothecin (CPT) and Fe(3)O(4) in the hybrid nanoparticles was demonstrated. RF-controlled drug release from these nanoparticles was observed. In addition, cellular uptake of the SRNPs into MT2 mouse breast cancer cells was examined. Using CPT as a model anticancer drug the nanoparticles showed a significant reduction in MT2 mouse breast cancer cell growth in vitro in the presence of a remote RF field. The ease of preparation, stability, and controllable drug release are the strengths of the platform and provide the opportunity to improve cancer chemotherapy.

Materials for diabetes therapeutics

This review is focused on the materials and methods used to fabricate closed-loop systems for type 1 diabetes therapy. Herein, we give a brief overview of current methods used for patient care and discuss two types of possible treatments and the materials used for these therapies-(i) artificial pancreases, comprised of insulin producing cells embedded in a polymeric biomaterial, and (ii) totally synthetic pancreases formulated by integrating continuous glucose monitors with controlled insulin release through degradable polymers and glucose-responsive polymer systems. Both the artificial and the completely synthetic pancreas have two major design requirements: the device must be both biocompatible and be permeable to small molecules and proteins, such as insulin. Several polymers and fabrication methods of artificial pancreases are discussed: microencapsulation, conformal coatings, and planar sheets. We also review the two components of a completely synthetic pancreas. Several types of glucose sensing systems (including materials used for electrochemical, optical, and chemical sensing platforms) are discussed, in addition to various polymer-based release systems (including ethylene-vinyl acetate, polyanhydrides, and phenylboronic acid containing hydrogels).

Fabrication and characterization of RF nanoantenna on a nanoliter-scale 3D microcontainer

We report the design and fabrication of a nanoantenna structure on the surface of a 3D nanoliter-scale container for the development of communicable nanoliter-scale chemical delivery systems. The porous container was self-assembled, after which the nanoantenna was fabricated on the top of the microcontainer using focused ion beam (FIB) ion-induced metal deposition. The nanoantenna was structured as a rectangular metal coil composed of platinum (Pt) nanowires (70 nm in width). The response of the nanoantenna structure was simulated using finite element software and showed a strong resonant feature at 10.8 GHz, which was confirmed by high frequency measurements.

Multifunctional composite core-shell nanoparticles

In this review paper, the state-of-the-art knowledge of the core-shell multifunctional nanoparticles (MNPs), especially with unique physiochemical properties, is presented. The synthesis methods were summarized from the aspects of both the advantages and the demerits. The core includes the inexpensive and easily oxidized metals and the noble shells include the relatively noble metals, carbon, silica, other oxides, and polymers. The properties including magnetic, optical, anti-corrosion and the surface chemistry of the NPs are thoroughly reviewed. The current status of the applications is reviewed with the detailed examples including the catalysis, giant magnetoresistance (GMR) sensing, electromagnetic interface shielding or microwave absorption, biomedical drug delivery, and the environmental remediation.

Magnetic nanomaterials for hyperthermia-based therapy and controlled drug delivery

Previous attempts to review the literature on magnetic nanomaterials for hyperthermia-based therapy focused primarily on magnetic fluid hyperthermia (MFH) using mono metallic/metal oxide nanoparticles. The term "hyperthermia" in the literature was also confined only to include use of heat for therapeutic applications. Recently, there have been a number of publications demonstrating magnetic nanoparticle-based hyperthermia to generate local heat resulting in the release of drugs either bound to the magnetic nanoparticle or encapsulated within polymeric matrices. In this review article, we present a case for broadening the meaning of the term "hyperthermia" by including thermotherapy as well as magnetically modulated controlled drug delivery. We provide a classification for controlled drug delivery using hyperthermia: Hyperthermia-based controlled drug delivery through bond breaking (DBB) and hyperthermia-based controlled drug delivery through enhanced permeability (DEP). The review also covers, for the first time, core-shell type magnetic nanomaterials, especially nanoshells prepared using layer-by-layer self-assembly, for the application of hyperthermia-based therapy and controlled drug delivery. The highlight of the review article is to portray potential opportunities for the combination of hyperthermia-based therapy and controlled drug release paradigms--towards successful application in personalized medicine.