Relations between in vitro cytotoxicity and crosslinked dermal sheep collagens

The cross-linking and protective effect of artemisinin and its derivatives on collagen fibers of demineralized dentin surface

OBJECTIVE

To investigate the cross-linking and protective effect of artemisinin (ART), dihydroartemisinin (DHA), and artesunate (AST) on collagen fibers of demineralized dentin surface.

METHODS

Molecular docking was used to predict potential interactions of ART, DHA, and AST with dentin type I collagen. Human third molars without caries were completely demineralized and treated with different solutions for 1 min. The molecular interactions and cross-linking degree of ART and its derivatives with dentin collagen were evaluated by FTIR spectroscopy, total extractable protein content, and a ninhydrin assay. Scanning electron microscopy, hydroxyproline release, and ultimate microtensile strength tests (μUTS) were employed to confirm the mechanical properties and anti-collagenase degradation properties of dentin collagen fibers.

RESULTS

ART, DHA, and AST combined with dentin type I collagen mainly through hydrogen bonding and hydrophobic interactions, and the cross-linking reaction sites were mainly C=O and CN functional groups. Compared to the control group, ART and its derivatives significantly increased the degree of cross-linking. Additionally, significant increases were observed in resistance to enzymatic digestion and mechanical properties of the artemisinin and its derivatives group.

CONCLUSION

ART, DHA, and AST could cross-link with demineralized dentin collagen, through improving the mechanical properties and anti-collagenase degradation properties.

CLINICAL SIGNIFICANCE

The study endorses the potential use of ART and its derivatives as a prospective collagen cross-linking agent for degradation-resistant and long-period dentin bonding in composite resin restorations.

Bioactive Components and Their Activities from Different Parts of Citrus aurantifolia (Christm.) Swingle for Food Development

Citrus aurantifolia is part of the Rutaceae family and belongs to the genus Citrus. It is widely used in food, the chemical industry, and pharmaceuticals because it has a unique flavor and odor. It is nutrient-rich and is beneficial as an antibacterial, anticancer, antioxidant, anti-inflammatory, and insecticide. Secondary metabolites present in C. aurantifolia are what give rise to biological action. Flavonoids, terpenoids, phenolics, limonoids, alkaloids, and essential oils are among the secondary metabolites/phytochemicals discovered in C. aurantifolia. Every portion of the plant's C. aurantifolia has a different composition of secondary metabolites. Environmental conditions such as light and temperature affect the oxidative stability of the secondary metabolites from C. aurantifolia. The oxidative stability has been increased by using microencapsulation. The advantages of microencapsulation are control of the release, solubilization, and protection of the bioactive component. Therefore, the chemical makeup and biological functions of the various plant components of C. aurantifolia must be investigated. The aim of this review is to discuss the bioactive components of C. aurantifolia such as essential oils, flavonoids, terpenoids, phenolic, limonoids, and alkaloids obtained from different parts of the plants and their biological activities such as being antibacterial, antioxidant, anticancer, an insecticide, and anti-inflammatory. In addition, various extraction techniques of the compounds out of different parts of the plant matrix as well as the microencapsulation of the bioactive components in food are also provided.

Influence of Crosslinking Methods on Biomimetically Mineralized Collagen Matrices for Bone-like Biomaterials

To assist in bone defect repair, ideal bone regeneration scaffolds should exhibit good osteoconductivity and osteoinductivity, but for load-bearing applications, they should also have mechanical properties that emulate those of native bone. The use of biomimetic processing methods for the mineralization of collagen fibrils has resulted in interpenetrating composites that mimic the nanostructure of native bone; however, closely matching the mechanical properties of bone on a larger scale is something that is still yet to be achieved. In this study, four different collagen crosslinking methods (EDC-NHS, quercetin, methacrylated collagen, and riboflavin) are compared and combined with biomimetic mineralization via the polymer-induced liquid-precursor (PILP) process, to obtain bone-like collagen-hydroxyapatite composites. Densified fibrillar collagen scaffolds were fabricated, crosslinked, and biomimetically mineralized using the PILP process, and the effect of each crosslinking method on the degree of mineralization, tensile strength, and modulus of the mineralized scaffolds were analyzed and compared. Improved modulus and tensile strength values were obtained using EDC-NHS and riboflavin crosslinking methods, while quercetin and methacrylated collagen resulted in little to no increase in mechanical properties. Decreased mineral contents appear to be necessary for retaining tensile strength, suggesting that mineral content should be kept below a percolation threshold to optimize properties of these interpenetrating nanocomposites. This work supports the premise that a combination of collagen crosslinking and biomimetic mineralization methods may provide solutions for fabricating robust bone-like composites on a larger scale.

[Modern prerequisites for creating a collagen-based artificial analogue of the corneal stroma]

Despite the fact that various collagen biomaterials have been actively used in ophthalmology for more than 30 years, the problem of creating a material that could replace the donor cornea have not been solved. Recent advances in the field of tissue engineering and regenerative medicine have shifted the focus of approaches to solving the problem of creating an artificial cornea towards laying conditions for the restoration of its specific layers through mechanisms of its own cellular regeneration. In this regard, extracellular matrices based on collagen are gaining popularity. This review discusses general limitations and advantages of collagen for creating an artificial cornea.

Soft Hydrogel Inspired by Elastomeric Proteins

Elastin polypeptides based on -VPGVG- repeated motifs are widely used in the production of biomaterials because they are stimuli-responsive systems. On the other hand, glycine-rich sequences, mainly present in tropoelastin terminal domains, are responsible for the elastin self-assembly. In a previous study, we have recombinantly expressed a chimeric polypeptide, named resilin, elastin, and collagen (REC), inspired by glycine-rich motifs of elastin and containing resilin and collagen sequences as well. Herein, a three-block polypeptide, named (REC)₃, was expressed starting from the previous monomer gene by introducing key modifications in the sequence. The choice was mandatory because the uneven distribution of the cross-linking sites in the monomer precluded the hydrogel production. In this work, the cross-linked polypeptide appeared as a soft hydrogel, as assessed by rheology, and the linear un-cross-linked trimer self-aggregated more rapidly than the REC monomer. The absence of cell-adhesive sequences did not affect cell viability, while it was functional to the production of a material presenting antiadhesive properties useful in the integration of synthetic devices in the body and preventing the invasion of cells.

Collagen crosslinking: effect on structure, mechanics and fibrosis progression

Biophysical properties of extracellular matrix (ECM), such as matrix stiffness, viscoelasticity and matrix fibrous structure, are emerging as important factors that regulate progression of fibrosis and other chronic diseases. The biophysical properties of the ECM can be rapidly and profoundly regulated by crosslinking reactions in enzymatic or non-enzymatic manners, which further alter the cellular responses and drive disease progression. In-depth understandings of crosslinking reactions will be helpful to reveal the underlying mechanisms of fibrosis progression and put forward new therapeutic targets, whereas related reviews are still devoid. Here, we focus on the main crosslinking mechanisms that commonly exist in a plethora of chronic diseases (e.g. fibrosis, cancer, osteoarthritis) and summarize current understandings including the biochemical reaction, the effect on ECM properties, the influence on cellular behaviors, and related studies in disease model establishment. Potential pharmaceutical interventions targeting the crosslinking process and relevant clinical studies are also introduced. Limitations of pharmaceutical development may be due to the lack of systemic investigations related to the influence on crosslinking mechanism from micro to macro level, which are discussed in the last section. We also propose the unclarified questions regarding crosslinking mechanisms and potential challenges in crosslinking-targeted therapeutics development.

Decellularized xenografts in regenerative medicine: From processing to clinical application

Decellularized xenografts are an inherent component of regenerative medicine. Their preserved structure, mechanical integrity and biofunctional composition have well established them in reparative medicine for a diverse range of clinical indications. Nonetheless, their performance is highly influenced by their source (ie species, age, tissue) and processing (ie decellularization, crosslinking, sterilization and preservation), which govern their final characteristics and determine their success or failure for a specific clinical target. In this review, we provide an overview of the different sources and processing methods used in decellularized xenografts fabrication and discuss their effect on the clinical performance of commercially available decellularized xenografts.

Antibacterial efficacy of quaternized chitosan/poly (vinyl alcohol) nanofiber membrane crosslinked with blocked diisocyanate

N-[(2-hydroxyl-3-trimethylammonium) propyl] chitosan chloride (HTCC), which is a type of chitosan derivative with quaternary ammonium groups, possesses a higher antibacterial activity as compared to the pristine chitosan. The nanofiber membranes made of HTCC are attractive for applications demanding for antibacterial function. However, the hydrophilic nature of HTCC makes it unsuitable for electrospinning of nanofibers. Hence, biodegradable polyvinyl alcohol (PVA) was proposed as an additive to improve the electrospinnability of HTCC. In this work, PVA/HTCC nanofiber membrane was crosslinked with the blocked diisocyanate (BI) to enhance the stability of nanofiber membrane in water. Microbiological assessments showed that the PVA/HTCC/BI nanofiber membranes possessed a good antibacterial efficacy (∼100 %) against E. coli. Moreover, the biocompatibility of PVA/HTCC/BI nanofiber membrane was proven by the cytotoxicity test on mouse fibroblasts. These promising results indicated that the PVA/HTCC/BI nanofiber membrane can be a promising material for food packaging and as a potential wound dressing for skin regeneration.

A tough act to follow: collagen hydrogel modifications to improve mechanical and growth factor loading capabilities

Collagen hydrogels are among ​the most well-studied platforms for drug delivery and in situ tissue engineering, thanks to their low cost, low immunogenicity, versatility, biocompatibility, and similarity to the natural extracellular matrix (ECM). Despite collagen being largely responsible for the tensile properties of native connective tissues, collagen hydrogels have relatively low mechanical properties in the absence of covalent cross-linking. This is particularly problematic when attempting to regenerate stiffer and stronger native tissues such as bone. Furthermore, in contrast to hydrogels based on ECM proteins such as fibronectin, collagen hydrogels do not have any growth factor (GF)-specific binding sites and often cannot sequester physiological (small) amounts of the protein. GF binding and in situ presentation are properties that can aid significantly in the tissue regeneration process by dictating cell fate without causing adverse effects such as malignant tumorigenic tissue growth. To alleviate these issues, researchers have developed several strategies to increase the mechanical properties of collagen hydrogels using physical or chemical modifications. This can expand the applicability of collagen hydrogels to tissues subject to a continuous load. GF delivery has also been explored, mathematically and experimentally, through the development of direct loading, chemical cross-linking, electrostatic interaction, and other carrier systems. This comprehensive article explores the ways in which these parameters, mechanical properties and GF delivery, have been optimized in collagen hydrogel systems ​and examines their in vitro or in vivo biological effect. This article can, therefore, be a useful tool to streamline future studies in the field, by pointing researchers into the appropriate direction according to their collagen hydrogel design requirements.

Novel Modification of Collagen: Realizing Desired Water Solubility and Thermostability in a Conflict-Free Way

Because of poor water solubility and low thermostability, the application of collagen is limited seriously in fields such as injectable biomaterials and cosmetics. In order to overcome the two drawbacks simultaneously, a novel bifunctional modifier based on the esterification of polyacrylic acid (PAA) with N-hydroxysuccinimide (NHS) was prepared. The esterification degree of PAA-NHS esters was increased upon increasing the NHS dose, which was confirmed by Fourier-transform infrared (FTIR) and nuclear magnetic resonance spectrascopy. FTIR results indicated that the triple helix of the modified collagens remained integrated, whereas the molecular weight became larger, as reflected by the sodium dodecyl sulfate-polyacrylamide gel electrophoresis pattern. The modified collagens displayed excellent water solubility under neutral condition, owing to lower isoelectric point (3.1-4.3) than that of native collagen (7.1). Meanwhile, denaturation temperatures of the modified collagens were increased by 4.8-5.9 °C after modification. The modified collagen displayed hierarchical microstructures, as reflected by field-emission scanning electron microscopy, while atomic force microscopy further revealed a "fishing net-like" network in the nanoscale, reflecting a unique aggregation behavior of collagen macromolecules after modification. As a whole, the PAA-NHS ester as a bifunctional modifier endowed collagen with desired water solubility and thermostability in a conflict-free manner, which was beneficial to the process and application of the water-soluble collagen.

Preparation and characterization of functionalized heparin-loaded poly-Ɛ-caprolactone fibrous mats to prevent infection with human papillomaviruses

In this study, heparin-loaded poly-ɛ-caprolactone (PCL) fibrous mats were prepared and characterized based on their physical, cytotoxic, thermal, and biological properties. The main objective of the work described here was to test the hypothesis that incorporation of heparin into a PCL carrier could serve as bio-compatible material capable of inhibiting Human Papillomavirus (HPV) infection. The idea of firmly anchoring heparin to capture soluble virus, vs. a slow heparin release to inhibit a virus in solution was tested. Thus, one material was produced via conventional heparin matrix encapsulation and electrohydrodynamic fiber processing in one step. A second type of material was obtained via heparin crosslinking. This was achieved by running a carbodiimide/N-hydroxysuccinimide (EDC/NHS) coupling reaction on preformed PCL fibers. In vitro HPV16 L1 protein binding capacity studies were performed. Infectivity assays were done using HPV16 pseudoviruses (PsVs) carrying a GFP plasmid to directly test the ability of the fibrous mats to prevent internalization of HPV PsVs. The crosslinked heparin material presented a dissociation constant (K_d) value comparable to those found in the literature for different heparin-protein L1 peptide interactions. Both materials significantly reduced internalization of HPV PsVs, with a reduction of 94% of PsVs internalization when matrix encapsulated heparin-loaded material was present. Differences in performance between the two proposed structures are discussed.

Bioactive scaffolds based on elastin-like materials for wound healing

Wound healing is a complex process that, in healthy tissues, starts immediately after the injury. Even though it is a natural well-orchestrated process, large trauma wounds, or injuries caused by acids or other chemicals, usually produce a non-elastic deformed tissue that not only have biological reduced properties but a clear aesthetic effect. One of the main drawbacks of the scaffolds used for wound dressing is the lack of elasticity, driving to non-elastic and contracted tissues. In the last decades, elastin based materials have gained in importance as biomaterials for tissue engineering applications due to their good cyto- and bio-compatibility, their ease handling and design, production and modification. Synthetic elastin or elastin like-peptides (ELPs) are the two main families of biomaterials that try to mimic the outstanding properties of natural elastin, elasticity amongst others; although there are no in vivo studies that clearly support that these two families of elastin based materials improve the elasticity of the artificial scaffolds and of the regenerated skin. Within the next pages a review of the different forms (coacervates, fibres, hydrogels and biofunctionalized surfaces) in which these two families of biomaterials can be processed to be applied in the wound healing field have been done. Here, we explore the mechanical and biological properties of these scaffolds as well as the different in vivo approaches in which these scaffolds have been used.

Tissue Regenerating Capacity of Carbodiimide-Crosslinked Dermal Sheep Collagen during Repair of the Abdominal Wall

In future, the function of collagen-based biomaterials as temporary scaffolds for the generation of new tissue may be emphasized. In this study the function of dermal sheep collagen (DSC) crosslinked with carbodiimide (ENDSC) as repair material for abdominal wall defects in rats was compared with that of commercial hexamethylenediisocyanate-crosslinked HDSC. The results indicate that early after implantation both ENDSC and HDSC functioned well as a matrix for cellular ingrowth. However during further implantation HDSC soon degraded resulting in herniations, while ENDSC showed a delay in the degradation time of at least 20 weeks. ENDSC thereby enabled collagen new-formation and functioned as a guidance for muscle overgrowth. These results are very promising concerning the problem of the ongoing foreign body reaction with continuing risk of implant rejection observed in clinical practice with non-degradable materials.

Enhanced Biological Response of AVS-Functionalized Ti-6Al-4V Alloy through Covalent Immobilization of Collagen

This study presents the development of an efficient procedure for covalently immobilizing collagen molecules on AVS-functionalized Ti-6Al-4V samples, and the assessment of the survival and proliferation of cells cultured on these substrates. Activated Vapor Silanization (AVS) is a versatile functionalization technique that allows obtaining a high density of active amine groups on the surface. A procedure is presented to covalently bind collagen to the functional layer using EDC/NHS as cross-linker. The covalently bound collagen proteins are characterized by fluorescence microscopy and atomic force microscopy and their stability is tested. The effect of the cross-linker concentration on the process is assessed. The concentration of the cross-linker is optimized and a reliable cleaning protocol is developed for the removal of the excess of carbodiimide from the samples. The results demonstrate that the covalent immobilization of collagen type I on Ti-6Al-4V substrates, using the optimized protocol, increases the number of viable cells present on the material. Consequently, AVS in combination with the carbodiimide chemistry appears as a robust method for the immobilization of proteins and, for the first time, it is shown that it can be used to enhance the biological response to the material.

Fluorescence studies on the aggregation behaviors of collagen modified with NHS-activated poly(γ-glutamic acid)

The poly(γ-glutamic acid)-NHS (γ-PGA-NHS) esters were used to endow collagen with both of excellent water-solubility and thermal stability via cross-linking reaction between γ-PGA-NHS and collagen. In the present work, the effect of γ-PGA-NHS on the aggregation of collagen molecules was studied by fluorescence techniques. The fluorescence emission spectra of pyrene in collagen solutions and the intrinsic fluorescence emission spectra of collagen suggested different effects of γ-PGA-NHS on collagen molecules: inhibiting aggregation below critical aggregation concentration (CAC) and promoting aggregation above CAC. The two-dimensional (2D) fluorescence correlation spectra indicated that the intermolecular hydrogen bonding and cross-linking between γ-PGA-NHS and collagen would influence the aggregation of collagen molecules. By the ultra-sensitive differential scanning calorimeter (VP-DSC), it was found that the main denaturational transition temperature (T_m2) of modified collagen increased, while its calorimetric enthalpy changes (ΔH₂) decreased compared to those of native collagen, further indicating that the modification of γ-PGA-NHS influenced the aggregation of collagen molecules. The study provide useful information for the utilizing and or the processing of water-soluble collagen in aqueous solution in the fields such as cosmetics, health care products, tissue engineering and biomedical materials, etc.

Ice as a Green-Structure-Directing Agent in the Synthesis of Macroporous MWCNTs and Chondroitin Sulphate Composites

The incorporation of multi-walled carbon nanotubes (MWCNTs) into chondroitin sulphate-based scaffolds and the effect on the structural, mechanical, conductive, and thermal properties of the resulting scaffolds is investigated. Three-dimensional hierarchical materials are prepared upon the application of the ice segregation-induced self-assembly (ISISA) process. The use of ice as structure-directing agents avoids chemicals typically used for this purpose (e.g., surfactants, block copolymers, etc.), hence, emphasising the green features of this soft-templating approach. We determine the critical parameters that control the morphology of the scaffolds formed upon ice-templating (i.e., MWCNTs type, freezing conditions, polymer and MWCNT concentration). MWCNTs are surface functionalized by acidic treatment. MWCNT functionalization is characterized by Raman, Fourier transfer infrared (FTIR) and X-ray Photoelectron (XPS) spectroscopies. Scanning electron microscopy (SEM) analysis and porosity studies reveal that MWCNT content modifies the morphology of the macroporous structure, which decreases by increasing MWCNT concentration. Differences in scaffold morphology should be translated into their conductivity and mechanical properties. As a general trend, the Young's modulus and the electrical conductivity of the scaffolds increase with the MWCNT content. Preliminary biocompatibility tests with human osteoblast-like cells also reveal the capability of these structures to support cell growth.

Neural stem/progenitor cells on collagen with anchored basic fibroblast growth factor as potential natural nerve conduits for facial nerve regeneration

Introducing neural stem/progenitor cells (NS/PCs) for repairing facial nerve injuries could be an alternative strategy for nerve gap reconstruction. However, the lack of success associated with current methods of applying NS/PCs to neurological disease is due to poor engraftment following transplantation into the host tissue. In this work, we developed rat-tail collagen-based nerve conduits to repair lengthy facial nerve defects, promoting NS/PC proliferation in the natural nerve conduits with anchored bFGF to improve the therapeutic effects of cell transplantation. In vitro studies showed that heparinized collagen prevented leakage of bFGF and NS/PCs expended in the rat-tail collagen gel with the anchored bFGF. The natural nerve conduits were implanted to connect 8-mm facial nerve defects in rats. The repair outcomes including vibrissae movements, electrophysiological tests, immunohistochemistry and remyelination analysis of regenerated nerve were evaluated. At 12weeks after implantation, only natural nerve conduits treated group showed Hoechst labeled NS/PCs. Besides, the natural nerve conduit significantly promoted functional recovery and nerve growth, which was similar to those of the gold standard, an autograft. The animal experiment results suggesting that the natural nerve conduits were valuable for facial nerve reconstruction.

STATEMENT OF SIGNIFICANCE

Neural stem/progenitor cells (NS/PCs) were beneficial for the treatment of nervous system diseases. However, after transplantation, the beneficial was limited because the number of living NS/PCs decreased rapidly due to insufficient signaling molecules, such as growth factors, in the microenvironments surrounding transplanted cells. In the present study, we constructed collagen-based nerve conduit with anchored bFGF to achieve higher numbers of NS/PCs for repairing facial nerve injury. Compared with other methods involving neutral salt treatment or dialysis, the fabrication method of collagen scaffolds was simple, low-cost and safe, requiring a relatively short time to prepare. At 12weeks after transplantation, the functional and histological results of natural nerve conduits treated group showed significant similarities to the gold standard method of nerve autografting.

Advances in the design and higher-order assembly of collagen mimetic peptides for regenerative medicine

Regenerative medicine makes use of cell-supporting biomaterials to replace lost or damaged tissue. Collagen holds great potential in this regard caused by its biocompatibility and structural versatility. While natural collagen has shown promise for regenerative medicine, collagen mimetic peptides (CMPs) have emerged that allow far higher degrees of customization and ease of preparation. A wide range of two and three-dimensional assemblies have been generated from CMPs, many of which accommodate cellular adhesion and encapsulation, through careful sequence design and the exploitation of electrostatic and hydrophobic forces. But the methodology that has generated the greatest plethora of viable biomaterials is metal-promoted assembly of CMP triple helices-a rapid process that occurs under physiological conditions. Architectures generated in this manner promote cell growth, enable directed attachment of bioactive cargo, and produce living tissue.

Collagen membranes crosslinked by β-cyclodextrin polyrotaxane monoaldehyde with good biocompatibilities and repair capabilities for cornea repair

Better mechanical properties; suturability; corneal regeneration.

A clinically relevant in vivo model for the assessment of scaffold efficacy in abdominal wall reconstruction

An animal model that allows for assessment of the degree of stretching or contraction of the implant area and the in vivo degradation properties of biological meshes is required to evaluate their performance in vivo. Adult New Zealand rabbits underwent full thickness subtotal unilateral rectus abdominis muscle excision and were reconstructed with the non-biodegradable Peri-Guard^®, Prolene^® or biodegradable Surgisis^® meshes. Following 8 weeks of recovery, the anterior abdominal wall tissue samples were collected for measurement of the implant dimensions. The Peri-Guard and Prolene meshes showed a slight and obvious shrinkage, respectively, whereas the Surgisis mesh showed stretching, resulting in hernia formation. Surgisis meshes showed in vivo biodegradation and increased collagen formation. This surgical rabbit model for abdominal wall defects is advantageous for evaluating the in vivo behaviour of surgical meshes. Implant area stretching and shrinkage were detected corresponding to mesh properties, and histological analysis and stereological methods supported these findings.

Riboflavin-induced photo-crosslinking of collagen hydrogel and its application in meniscus tissue engineering

A meniscus tear is a common knee injury, but its regeneration remains a clinical challenge. Recently, collagen-based scaffolds have been applied in meniscus tissue engineering. Despite its prevalence, application of natural collagen scaffold in clinical setting is limited due to its extremely low stiffness and rapid degradation. The purpose of the present study was to increase the mechanical properties and delay degradation rate of a collagen-based scaffold by photo-crosslinking using riboflavin (RF) and UV exposure. RF is a biocompatible vitamin B2 that showed minimal cytotoxicity compared to conventionally utilized photo-initiator. Furthermore, collagen photo-crosslinking with RF improved mechanical properties and delayed enzyme-triggered degradation of collagen scaffolds. RF-induced photo-crosslinked collagen scaffolds encapsulated with fibrochondrocytes resulted in reduced scaffold contraction and enhanced gene expression levels for the collagen II and aggrecan. Additionally, hyaluronic acid (HA) incorporation into photo-crosslinked collagen scaffold showed an increase in its retention. Based on these results, we demonstrate that photo-crosslinked collagen-HA hydrogels can be potentially applied in the scaffold-based meniscus tissue engineering.

Collagen: a network for regenerative medicine

The basic building block of the extra-cellular matrix in native tissue is collagen. As a structural protein, collagen has an inherent biocompatibility making it an ideal material for regenerative medicine. Cellular response, mediated by integrins, is dictated by the structure and chemistry of the collagen fibers. Fiber formation, via fibrillogenesis, can be controlled in vitro by several factors: pH, ionic strength, and collagen structure. After formation, fibers are stabilized via cross-linking. The final bioactivity of collagen scaffolds is a result of both processes. By considering each step of fabrication, scaffolds can be tailored for the specific needs of each tissue, improving their therapeutic potential.

Porous Poly (DL-Lactic Acid) Modified Chitosan-Gelatin Scaffolds for Tissue Engineering

Chitosan-gelatin (Cs-Gel) scaffolds are modified with poly (DL-lactic acid) (PDLLA) dichloromethane solution of different concentrations (0.1, 0.5, and 1.0%) and immersed in water after the evaporation of the solvent. The swollen scaffolds are freeze dried. The concentration of PDLLA has significant effects on both the physicomechanical properties and the cytocompatibility. Data reveal that only the 0.1% concentration could increase the tensile strength fourfold in comparison with the pristine Cs-Gel scaffold, while maintaining the human fibroblast adhesion, migration, and proliferation just like the Cs-Gel scaffold.

In Vitro Enzymatic Degradation of Tissue Grafts and Collagen Biomaterials by Matrix Metalloproteinases: Improving the Collagenase Assay

Matrix metalloproteinase-1 and -8 are active during the wound healing and remodelling processes, degrading native extracellular matrix and implantable devices. However, traditional in vitro assays utilize primarily matrix metalloproteinase-1 to mimic the in vivo degradation microenvironment. Herein, we assessed the influence of various concentrations of matrix metalloproteinase- 1 and 8 (50, 100, and 200 U/mL) as a function of pH (5.5 and 7.4) and time (3, 6, 9, 12, and 24 h) on the degradation profile of three tissue grafts (chemically cross-linked Permacol, nonchemically cross-linked Permacol and nonchemically cross-linked Strattice) and a collagen biomaterial (nonchemically cross-linked collagen sponge). Chemically cross-linked and nonchemically cross-linked Permacol samples exhibited the highest resistance to enzymatic degradation, while nonchemically cross-linked collagen sponges exhibited the least resistance to enzymatic degradation. Qualitative and quantitative degradation analysis of all samples revealed a similar degradation profile over time, independently of the matrix metalloproteinase used and its respective concentration and pH. These data indicate that matrix metalloproteinase-1 and matrix metalloproteinase-8 exhibit similar degradation profile in vitro, suggesting that matrix metalloproteinase-8 should be used for collagenase assay.

Review of various treatment options and potential therapies for osteonecrosis of the femoral head

Size and location of the lesion, subchondral collapse occurrence, and articular cartilage involvement are general disease progression criteria for direct osteonecrosis of the femoral head (ONFH) classifications. Treatment options for ONFH are usually based on individual factors and lesion characteristics. Although spontaneous repair of ONFH occurs in some cases, untreated ONFH is unlikely to escape the fate of subchondral collapse and usually ends up with total hip arthroplasty. Operations to preserve the femoral head, e.g., core decompression and bone grafting, are usually recommended in younger patients. They are helpful to relieve pain and improve function in the affected femoral head without subchondral collapse, however, poor prognosis after surgical procedures remains the major problem for ONFH. Pharmacological and physical therapies only work in the early stage of ONFH and have also been recommended as a supplement or prevention treatment for osteonecrosis. Following advances in basic science, many new insights focus on bone tissue engineering to optimize therapies and facilitate prognosis of ONFH. In this review, disease classifications, current treatment options, potential therapies, and the relevant translational barriers are reviewed in the context of clinical application and preclinical exploration, which would provide guidance for preferable treatment options and translation into novel therapies.

Bioabsorbable fish scale for the internal fixation of fracture: a preliminary study

Fish scales, which consist of type I collagen and hydroxyapatite (HA), were used to fabricate a bioabsorbable bone pin in this study. Fresh fish scales were decellularized and characterized to provide higher biocompatibility. The mechanical properties of fish scales were tested, and the microstructure of an acellular fish scale was examined. The growth curve of a myoblastic cell line (C2C12), which was cultured on the acellular fish scales, implied biocompatibility in vitro, and the morphology of the cells cultured on the scales was observed using scanning electron microscopy (SEM). A bone pin made of decellularized fish scales was used for the internal fixation of femur fractures in New Zealand rabbits. Periodic X-ray evaluations were obtained, and histologic examinations were performed postoperatively. The present results show good cell growth on decellularized fish scales, implying great biocompatibility in vitro. Using SEM, the cell morphology revealed great adhesion on a native, layered collagen structure. The Young's modulus was 332 ± 50.4 MPa and the tensile strength was 34.4 ± 6.9 MPa for the decellularized fish scales. Animal studies revealed that a fish-scale-derived bone pin improved the healing of bone fractures and degraded with time. After an 8-week implantation, the bone pin integrated with the adjacent tissue, and new extracellular matrix was synthesized around the implant. Our results proved that fish-scale-derived bone pins are a promising implant material for bone healing and clinical applications.

In situ crosslinking of electrospun gelatin for improved fiber morphology retention and tunable degradation

In situ crosslinking provides a method to crosslink gelatin during electrospinning enabling tunable degradation rates and displaying improved fiber morphology retention after implantation.

Induction of endometrial mesenchymal stem cells into tissue-forming cells suitable for fascial repair

Pelvic organ prolapse is a major hidden burden affecting almost one in four women. It is treated by reconstructive surgery, often augmented with synthetic mesh. To overcome the growing concerns of using current synthetic meshes coupled with the high risk of reoperation, a tissue engineering strategy has been developed, adopting a novel source of mesenchymal stem cells. These cells are derived from the highly regenerative endometrial lining of the uterus (eMSCs) and will be delivered in vivo using a new gelatin-coated polyamide scaffold. In this study, gelatin properties were optimized by altering the gelatin concentration and extent of crosslinking to produce the desired gelation and degradation rate in culture. Following cell seeding of uncoated polyamide (PA) and gelatin-coated meshes (PA+G), the growth rate of eMSCs on the PA+G scaffolds was more than that on the PA alone, without compromising cell shape. eMSCs cultured on the PA+G scaffold retained their phenotype, as demonstrated by W5C5/SUSD2 (eMSC-specific marker) immunocytochemistry. Additionally, eMSCs were induced to differentiate into smooth muscle cells (SMC), as shown by immunofluorescence for smooth muscle protein 22 and smooth muscle myosin heavy chain. eMSCs also differentiated into fibroblast-like cells when treated with connective tissue growth factor with enhanced detection of Tenascin-C and collagen type I as well as new tissue formation, as seen by Masson's trichrome. In summary, it was demonstrated that the PA+G scaffold is an appropriate platform for eMSC delivery, proliferation and differentiation into SMC and fibroblasts, with good biocompatibility and the capacity to regenerate neo-tissue.

Cartilaginous extracellular matrix-modified chitosan hydrogels for cartilage tissue engineering

Cartilaginous extracellular matrix (ECM) components such as type-II collagen (Col II) and chondroitin sulfate (CS) play a crucial role in chondrogenesis. However, direct clinical use of natural Col II or CS as scaffolds for cartilage tissue engineering is limited by their instability and rapid enzymatic degradation. Here, we investigate the incorporation of Col II and CS into injectable chitosan hydrogels designed to gel upon initiation by exposure to visible blue light (VBL) in the presence of riboflavin. Unmodified chitosan hydrogel supported proliferation and deposition of cartilaginous ECM by encapsulated chondrocytes and mesenchymal stem cells. The incorporation of native Col II or CS into chitosan hydrogels further increased chondrogenesis. The incorporation of Col II, in particular, was found to be responsible for the enhanced cellular condensation and chondrogenesis observed in modified hydrogels. This was mediated by integrin α10 binding to Col II, increasing cell-matrix adhesion. These findings demonstrate the potential of cartilage ECM-modified chitosan hydrogels as biomaterials to promote cartilage regeneration.

Tailoring the properties of gelatin films for drug delivery applications: influence of the chemical cross-linking method

Two types of chemically cross-linked gelatin films were prepared and characterized. The first type of films was cross-linked with 1-ethyl-3-(3-dimethyl aminopropyl)carbodiimide hydrochloride (EDC) under heterogeneous conditions and are named Gel-E. In the second type of films, gelatin was previously functionalized with methacrylamide side groups by the reaction with methacrylic anhydride and for that is named Gel-MA. The modified gelatin was subsequently cross-linked by a photoinitiated radical polymerization. These films were characterized relatively to their degree of cross-linking, buffer uptake capacity, resistance to hydrolytic and proteolytic degradation, and mechanical and thermal properties. Results show that the employed cross-linking method, together with the degree cross-linking, dictate the final properties of the films. Gel-E films have significant lower buffer uptake capacities and higher resistance to collagenase digestion when compared to Gel-MA films. Additionally, Gel-E films exhibit higher values of stress at break and lower strains at break. Moreover, the films properties could be modified by varying the extent of the chemical cross-linking, which in turn could be controlled by varying the concentration of EDC, for the first type of films (Gel-E), or by using gelatins with different degrees of functionalization, in the case of the second type of films (Gel-MA).

Functionalization of electrospun poly(ε-caprolactone) scaffold with heparin and vascular endothelial growth factors for potential application as vascular grafts

In this study, a heparin-conjugated poly(ε-caprolactone) electrospun fiber was constructed to develop a functional scaffold for controlled release of vascular endothelial growth factors. The immobilization of vascular endothelial growth factor was achieved through affinity binding between heparin and vascular endothelial growth factor molecules. The sustained release of vascular endothelial growth factor from the scaffold was followed for up to 15 days. The endothelial cell adhesion and proliferation assay demonstrated that immobilized vascular endothelial growth factor maintained its activity. The blood compatibility of the scaffold was evaluated by activated partial thromboplastin time, platelet adhesion test, and arteriovenous shunt, and the functionalized scaffold showed improved anticoagulation properties. The biocompatibility was evaluated by subcutaneous implantation. Results showed that this vascular endothelial growth factor–releasing scaffold stimulated neovascularization with minimum immunological rejection compared to the unmodified poly(ε-caprolactone) scaffold. The present study demonstrated a new strategy of building bioactive scaffolds for the development of small-diameter vascular graft.

Polypropylene mesh and the host response

The use of polypropylene (PP) mesh for pelvic floor repair has been increasing dramatically over the past decade; however, tissue response in humans has not been extensively studied. This review discusses PP mesh and postimplantation host tissue response. Emphasis is placed on studies investigating the relationship between individual mesh properties and specific responses. There is an immediate inflammatory response after PP mesh implantation that lays the framework for tissue ingrowth and subsequent mesh integration. This response varies based on physical properties of individual mesh, such as pore size, weight, coatings, bacterial colonization, and biofilm production.

Novel soy protein wound dressings with controlled antibiotic release: mechanical and physical properties

Naturally derived materials are becoming widely used in the biomedical field. Soy protein has advantages over various types of natural proteins employed for biomedical applications due to its low price, non-animal origin and relatively long storage time and stability. In the current study soy protein isolate (SPI) was investigated as a matrix for wound dressing applications. The antibiotic drug gentamicin was incorporated into the matrix for local controlled release and, thus, protection against bacterial infection. Homogeneous yellowish films were cast from aqueous solutions. After cross-linking they combined high tensile strength and Young's modulus with the desired ductility. The plasticizer type, cross-linking agent and method of cross-linking were found to strongly affect the tensile properties of the SPI films. Selected SPI films were tested for relevant physical properties and the gentamicin release profile. The cross-linking method affected the degree of water uptake and the weight loss profile. The water vapor transmission rate of the films was in the desired range for wound dressings (∼2300 g m(-2) day(-1)) and was not affected by the cross-linking method. The gentamicin release profile exhibited a moderate burst effect followed by a decreasing release rate which was maintained for at least 4 weeks. Diffusion was the dominant release mechanism of gentamicin from cross-linked SPI films. Appropriate selection of the process parameters yielded SPI wound dressings with the desired mechanical and physical properties and drug release behavior to protect against bacterial infection. These unique structures are thus potentially useful as burn and ulcer dressings.