Experimental investigation of interfaces in hydroxyapatite/polyacrylic acid/polycaprolactone composites using photoacoustic FTIR spectroscopy

Nanofibrous Biomaterial-Based Passive Cooling Paint Structurally Linked by Alkane-Oleate Interactions

Passive radiative cooling materials, which provide cooling without consuming electricity, are widely recognized as an important technology for reducing greenhouse gas emissions and delivering thermal comfort to less industrialized communities. Optimizing thermal and optical properties is of primary importance for these materials, but for real-world utilization, ease of application and scalability also require significant emphasis. In this work, we embed the biomaterial hydroxyapatite, in the form of nanoscale fibers, within an oil-based medium to achieve passive cooling from an easy-to-apply paint-like solution. The chemical structure and bonding behaviors of this mixture are studied in detail using FTIR, providing transferable conclusions for pigment-like passive cooling solutions. By reflecting 95% of solar energy and emitting 92% of its radiative output through the atmospheric transparency window, this composite material realizes an average subambient cooling performance of 3.7 °C in outdoor conditions under a mean solar irradiance of 800 W m-2. The inflammability of the material provides enhanced durability as well as unique opportunities for recycling which promote circular economic practices. Finally, the surface structure can be easily altered to tune bonding behaviors and hydrophobicity, making it an ideal passive cooling coating candidate for outdoor applications.

Three-Dimensional Printing of Curcumin-Loaded Biodegradable and Flexible Scaffold for Intracranial Therapy of Glioblastoma Multiforme

A novel drug delivery system preventing Glioblastoma multiforme (GBM) recurrence after resection surgery is imperatively required to overcome the mechanical limitation of the current local drug delivery system and to offer personalised treatment options for GBM patients. In this study, 3D printed biodegradable flexible porous scaffolds were developed via Fused Deposition Modelling (FDM) three-dimensional (3D) printing technology for the local delivery of curcumin. The flexible porous scaffolds were 3D printed with various geometries containing 1, 3, 5, and 7% (w/w) of curcumin, respectively, using curcumin-loaded polycaprolactone (PCL) filaments. The scaffolds were characterised by a series of characterisation studies and in vitro studies were also performed including drug release study, scaffold degradation study, and cytotoxicity study. The curcumin-loaded PCL scaffolds displayed versatile spatiotemporal characteristics. The polymeric scaffolds obtained great mechanical flexibility with a low tensile modulus of less than 2 MPa, and 4 to 7-fold ultimate tensile strain, which can avoid the mechanical mismatch problem of commercially available GLIADEL wafer with a further improvement in surgical margin coverage. In vitro release profiles have demonstrated the sustained release patterns of curcumin with adjustable release amounts and durations up to 77 h. MTT study has demonstrated the great cytotoxic effect of curcumin-loaded scaffolds against the U87 human GBM cell line. Therefore, 3D printed curcumin-loaded scaffold has great promise to provide better GBM treatment options with its mechanical flexibility and customisability to match individual needs, preventing post-surgery GBM recurrence and eventually prolonging the life expectancy of GBM patients.

Preparation and structure of SiOCN fibres derived from cyclic silazane/poly-acrylic acid hybrid precursor

Ceramic matrix composite (CMC) materials have been considered a desired solution for lightweight and high-temperature applications. Simultaneously, among all different CMC reinforcements, polymer-derived ceramic (PDC) fibres have gained attention for the intrinsic thermal stability and mechanical strength with simple and cost-effective synthesis techniques. Here, carbon-rich SiOCN fibres were synthesized via hand-drawing and polymer pyrolysis of a hybrid precursor of 1,3,5,7-tetramethyl-1,3,5,7-tetravinylcyclotetrasilazane (TTCSZ) and poly-acrylic acid (PAA). The type of silazane reported in this work is considered as a major precursor for SiCN; however, it is unspinnable, due to its unfavourable physical properties (low viscosity) and chemical structure (cyclic rather than linear structure). The introduction of PAA to TTCSZ to create a hybrid precursor remarkably improved the spinnability of the silazane and should be widely applicable to other unspinnable PDC pre-ceramic polymers. Investigations on the structural and compositional development of the fibres were mainly conducted via Raman spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, nuclear magnetic resonance and thermo-gravimetric analysis to determine spinnability, free carbon content, cross-linking and pyrolysis behaviour of the fibres, respectively.

Biphasic organo-bioceramic fibrous composite as a biomimetic extracellular matrix for bone tissue regeneration

In bone tissue engineering, the organo-ceramic composite, electrospun polycaprolactone/hydroxyapatite (PCL/HA) scaffold has the potential to support cell proliferation, migration, differentiation, and homeostasis. Here, we report the effect of PCL/HA scaffold in tissue regeneration using human mesenchymal stem cells (hMSCs). We characterized the scaffold by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM) and assessed its biocompatibility. PCL/HA composite is superior as a scaffold compared to PCL alone. Furthermore, increasing HA content (5-10%) was more efficacious in supporting cell-scaffold attachment, expression of ECM molecules and proliferation. These results suggest that PCL/HA is useful as a scaffold for tissue regeneration.

Identification of Chinese medicinal fungus Cordyceps sinensis by depth-profiling mid-infrared photoacoustic spectroscopy

With increased demand for Cordyceps sinensis it needs rapid methods to meet the challenge of identification raised in quality control. In this study Cordyceps sinensis from four typical natural habitats in China was characterized by depth-profiling Fourier transform infrared photoacoustic spectroscopy. Results demonstrated that Cordyceps sinensis samples resulted in typical photoacoustic spectral appearance, but heterogeneity was sensed in the whole sample; due to the heterogeneity Cordyceps sinensis was represented by spectra of four groups including head, body, tail and leaf under a moving mirror velocity of 0.30cms^-1. The spectra of the four groups were used as input of a probabilistic neural network (PNN) to identify the source of Cordyceps sinensis, and all the samples were correctly identified by the PNN model. Therefore, depth-profiling Fourier transform infrared photoacoustic spectroscopy provides novel and unique technique to identify Cordyceps sinensis, which shows great potential in quality control of Cordyceps sinensis.

Polymeric nanoparticles modified with fatty acids encapsulating betamethasone for anti-inflammatory treatment

Topical glucocorticosteroids were incorporated into nanocarrier-based formulations, to overcome side effects of conventional formulations and to achieve maximum skin deposition. Nanoparticulate carriers have the potential to prolong the anti-inflammatory effect and provide higher local concentration of drugs, offering a better solution for treating dermatological conditions and improving patient compliance. Nanoparticles were formulated with poly-ϵ-caprolactone as the polymeric core along with stearic acid as the fatty acid, for incorporation of betamethasone-21-acetate. Oleic acid was applied as the coating fatty acid. Improvement of the drug efficacy, and reduction in drug degradation with time in the encapsulated form was examined, while administering it locally through controlled release. Nanoparticles were spherical with mean size of 300 nm and negatively charged surface. Encapsulation efficiency was 90%. Physicochemical stability in aqueous media of the empty and loaded nanoparticles was evaluated for six months. Drug degradation was reduced compared to free drug, after encapsulation into nanoparticles, avoiding the potency decline and promoting a controlled drug release over one month. Fourier transform infrared spectroscopy and thermal analysis confirmed drug entrapment, while cytotoxicity studies performed in vitro on human keratinocytes, Saccharomyces cerevisiae models and Artemia salina, showed a dose-response relationship for nanoparticles and free drug. In all models, drug loaded nanoparticles had a greater inhibitory effect. Nanoparticles increased drug permeation into lipid membranes in vitro. Preliminary safety and permeation studies conducted on rats, showed betamethasone-21-acetate in serum after 48 h application of a gel containing nanoparticles. No skin reactions were observed. In conclusion, the developed nanoparticles may be applied as topical treatment, after encapsulation of betamethasone-21-acetate, as nanoparticles promote prolonged drug release, increase drug stability in aqueous media, reducing drug degradation, and increase drug permeability through lipid membranes.

Photoacoustic FTIR spectroscopic study of undisturbed human cortical bone

Chemical pretreatment has been the prevailing sample preparation procedure for infrared (IR) spectroscopic studies on bone. However, experiments have indicated that chemical pretreatment can potentially affect the interactions between the components. Typically the IR techniques have involved transmission experiments. Here we report experimental studies using photoacoustic Fourier transform infrared spectroscopy (PA-FTIR). As a nondestructive technique, PA-FTIR can detect absorbance spectrum from a sample at controllable sampling depth and with little or no sample preparation. Additionally, the coupling inert gas, helium, which is utilized in the PA-FTIR system, can inhibit bacteria growth of bone by displacing oxygen. Therefore, we used this technique to study the undisturbed human cortical bone. It is found that photoacoustic mode (linear-scan, LS-PA-FTIR) can obtain basically similar spectra of bone as compared to the traditional transmission mode, but it seems more sensitive to amide III and ν(2) carbonate bands. The ν(3) phosphate band is indicative of detailed mineral structure and symmetry of native bone. The PA-FTIR depth profiling experiments on human cortical bone also indicate the influence of water on OH band and the cutting effects on amide I and mineral bands. Our results indicate that phosphate ion geometry appears less symmetric in its undisturbed state as detected by the PA-FTIR as compared to higher symmetry observed using transmission techniques on disturbed samples. Moreover, the PA-FTIR spectra indicate a band at 1747 cm(-1) possibly resulting from CO stretching of lipids, cholesterol esters, and triglycerides from the arteries. Comparison of the spectra in transverse and longitudinal cross-sections demonstrates that, the surface area of the longitudinal section bone appears to have more organic matrix exposed and with higher mineral stoichiometry.

Bone nodules on chitosan-polygalacturonic acid-hydroxyapatite nanocomposite films mimic hierarchy of natural bone

The ultimate goal of bone tissue engineering is to develop bony tissues on tissue engineered constructs that mimic the native bone. Nanoscale characterization of in vitro generated bony tissues on engineered scaffolds is essential to understanding both the physical and mechanical characteristics of the engineered bone. Bone nodule formation, a typical early indicator of bone formation was observed on chitosan-polygalacturonic acid-hydroxyapatite (Chi-PgA-HAP) nanocomposite films without the use of differentiating media. Thus, the Chi-PgA-HAP substrates designed are osteoinductive and provide an appropriate microenvironment for cell organization and tissue regeneration. Imaging using atomic force microscopy revealed several levels of hierarchical structures of bone in the bone nodules, consisting of mineralized collagen fibers, fibrils and mineral deposits in extrafibrillar spaces. The nanoscale elastic properties of the collagen and mineral crystals were found to be in close agreement with the experimental and simulations results on natural bone reported in the literature. Fourier transform infrared spectroscopy experiments indicate the presence of collagen and biological apatite in bone nodules exhibiting the characteristics of newly precipitated, immature bone. Collectively, our structural, chemical, and mechanical analyses support the conclusion that synthetic bone nodules mimic the hierarchy of natural bone.

In Situ Swelling Behavior of Chitosan-Polygalacturonic Acid/Hydroxyapatite Nanocomposites in Cell Culture Media

The molecular and mechanical characteristics of in situ degradation behavior of chitosan-polygalacturonic acid/hydroxyapatite (Chi-PgA-HAP) nanocomposite films is investigated using Fourier Transform Infrared spectroscopy (FTIR), Atomic Force Microscopy (AFM), and modulus mapping techniques for up to 48 days of soaking in cell culture media. The surface molecular structure of media-soaked samples changes over the course of 48 days of soaking, as indicated by significant changes in phosphate vibrations (1200–900 ) indicating apatite formation. Chitosan-Polygalacturonic acid polyelectrolyte complexes (PECs) govern structural integrity of Chi-PgA-HAP nanocomposites and FTIR spectra indicate that PECs remain intact until 48 days of soaking. In situ AFM experiments on media-soaked samples indicate that soaking results in a change in topography and swelling proceeds differently at the initial soaking periods of about 8 days than for longer soaking. In situ modulus mapping experiments are done on soaked samples by probing 1–3 nm of surface indicating elastic moduli of 4 GPa resulting from proteins adsorbed on Chi-PgA-HAP nanocomposites. The elastic modulus decreases by 2 GPa over a long exposure to cell culture media (48 days). Thus, as water enters the Chi-PgA-HAP sample, surface molecular interactions in Chi-PgA-HAP structure occur that result in swelling, causing small changes in nanoscale mechanical properties.

Problem of hydroxyapatite dispersion in polymer matrices: a review

This review summarizes recent work on manufacturing biocomposites suitable for bone tissue engineering. There is a great need to engineer multi-phase (i.e. composite) materials that combine the advantages exhibited by each component of the material, with a structure and composition similar to that of natural bone. The discussion concentrates on the preparation of nanocomposites containing hydroxyapatite particles (one of the most widely used bioceramics materials) with polymer matrices. Special attention is paid to the preparation of nanocomposites with individual (non-aggregated) nanoparticles because this is a key problem in nanotechnology industrialization. Controlling the mixing between so two dissimilar phases is a critical challenge in the design of these inorganic-organic systems. Several approaches that may be applied to overcome this problem will be described in this review.

Effect of biopolymers on structure of hydroxyapatite and interfacial interactions in biomimetically synthesized hydroxyapatite/biopolymer nanocomposites

The interfacial interaction and effect of biopolymer on crystal structure of hydroxyapatite in biomimetically synthesized nanocomposites, chitosan/hydroxyapatite (ChiHAP50), polygalacturonic acid/hydroxyapatite (PgAHAP50), and chitosan/polygalacturonic acid/hydroxyapatite (ChiPgAHAP50) have been investigated using atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, and Rietveld analysis. AFM phase images show nano-sized hydroxyapatite particles uniformly distributed in biopolymer. FTIR spectra indicate that chitosan interacts with hydroxyapatite through NH(3)(+) groups, whereas in polygalacturonic acid/hydroxyapatite, dissociated carboxylate groups (COO(-)) form unidentate chelate with calcium atoms. A change in lattice parameters of hydroxyapatite in all nanocomposites is observed using Rietveld analysis. The increase in lattice parameters was most prominent along c-axis in ChiHAP50 and ChiPgAHAP50 nanocomposites, which was 0.388% and 0.319%, respectively. Comparison between particle sizes of hydroxyapatite, determined from AFM and Rietveld analysis, indicates presence of amorphous phase in hydroxyapatite particles, which is believed to be present at the interface of hydroxyapatite and biopolymer.

A mesoporous bioactive glass/polycaprolactone composite scaffold and its bioactivity behavior

Composite scaffolds of mesoporous bioactive glass (MBG)/polycaprolactone (PCL) and conventional bioactive glass (BG)/PCL were fabricated by a solvent casting-particulate leaching method, and the structure and properties of the composite scaffolds were characterized. The measurements of the water contact angles suggest that the incorporation of either MBG or BG into PCL can improve the hydrophilicity of the composites, and the former is more effective than the later. The bioactivity of the composite scaffold is evaluated by soaking the scaffolds in a simulated body fluid (SBF) and the results show that the MBG/PCL composite scaffolds can induce a dense and continuous layer of apatite after soaking in SBF for 3 weeks, as compared with the scattered and discrete apatite particles on the BG/PCL composite scaffolds. Such improvements (improvements of the hydrophilicity and apatite forming ability) should be helpful for the extensive applications of PCL scaffold in tissue engineering.

Bioactivity in in situ hydroxyapatite-polycaprolactone composites

In our previous work, hydroxyapatite (HAP) was synthesized under two conditions: one in the presence of polyacrylic acid (in situ HAP) and the other in the absence of polyacrylic acid (ex situ HAP). Composites of both HAPs with polycaprolactone (PCL) were investigated for their applicability as scaffolds for bone tissue engineering. In the current work, bioactivity of these composites has been investigated by soaking them in simulated body fluid for different intervals of time. Nucleation and growth mechanism of apatite on these composites has also been investigated. Fourier transform infrared spectroscopy study suggests that although apatite growth starts with an intermediate phase, it completely transforms to HAP after 4 days of soaking. Nanoindentation results suggest that the apatite growing on in situ HAP/PCL composites has much higher hardness and elastic modulus as compared to the apatite growing on ex situ HAP/PCL composites. The apatite grown on the ex situ composites has a net-like interconnected structure. The observed differences in mechanical properties and morphology of apatite have been described on the basis of nucleation mechanisms. The nucleation of apatite on the in situ HAP/PCL composites proceeds through the formation of a complex between Ca2+ and COO- groups; on the other hand, nucleation occurs because of dissolution reaction of apatite in ex situ HAP/PCL composites.