Oxygen diffusivity of biologic and synthetic scaffold materials for tissue engineering

Metalloproteinases are involved in the regulation of prenatal tooth morphogenesis

During development, tooth germs undergo various morphological changes resulting from interactions between the oral epithelium and ectomesenchyme. These processes are influenced by the extracellular matrix, the composition of which, along with cell adhesion and signaling, is regulated by metalloproteinases. Notably, these include matrix metalloproteinases (MMPs), a disintegrin and metalloproteinases (ADAMs), and a disintegrin and metalloproteinases with thrombospondin motifs (ADAMTSs). Our analysis of previously published scRNAseq datasets highlight that these metalloproteinases show dynamic expression patterns during tooth development, with expression in a wide range of cell types, suggesting multiple roles in tooth morphogenesis. To investigate this, Marimastat, a broad-spectrum inhibitor of MMPs, ADAMs, and ADAMTSs, was applied to ex vivo cultures of mouse molar tooth germs. The treated samples exhibited significant changes in tooth germ size and morphology, including an overall reduction in size and an inversion of the typical bell shape. The cervical loop failed to extend, and the central area of the inner enamel epithelium protruded. Marimastat treatment also disrupted proliferation, cell polarization, and organization compared with control tooth germs. In addition, a decrease in laminin expression was observed, leading to a disruption in continuity of the basement membrane at the epithelial-mesenchymal junction. Elevated hypoxia-inducible factor 1-alpha gene (Hif-1α) expression correlated with a disruption to blood vessel development around the tooth germs. These results reveal the crucial role of metalloproteinases in tooth growth, shape, cervical loop elongation, and the regulation of blood vessel formation during prenatal tooth development.NEW & NOTEWORTHY Inhibition of metalloproteinases during tooth development had a wide-ranging impact on molar growth affecting proliferation, cell migration, and vascularization, highlighting the diverse role of these proteins in controlling development.

Colonic oxygen microbubbles augment systemic oxygenation and CO2 removal in a porcine smoke inhalation model of severe hypoxia

Inhalation injury can lead to pulmonary complications resulting in the development of respiratory distress and severe hypoxia. Respiratory distress is one of the major causes of death in critically ill patients with a reported mortality rate of up to 45%. The present study focuses on the effect of oxygen microbubble (OMB) infusion via the colon in a porcine model of smoke inhalation-induced lung injury. Juvenile female Duroc pigs (n = 6 colonic OMB, n = 6 no treatment) ranging from 39 to 51 kg in weight were exposed to smoke under general anesthesia for 2 h. Animals developed severe hypoxia 48 h after smoke inhalation as reflected by reduction in SpO₂ to 66.3 ± 13.1% and PaO₂ to 45.3 ± 7.6 mmHg, as well as bilateral diffuse infiltrates demonstrated on chest X-ray. Colonic OMB infusion (75-100 mL/kg dose) resulted in significant improvements in systemic oxygenation as demonstrated by an increase in PaO₂ of 13.2 ± 4.7 mmHg and SpO₂ of 15.2 ± 10.0% out to 2.5 h, compared to no-treatment control animals that experienced a decline in PaO₂ of 8.2 ± 7.9 mmHg and SpO₂ of 12.9 ± 18.7% over the same timeframe. Likewise, colonic OMB decreased PaCO₂ and PmvCO₂ by 19.7 ± 7.6 mmHg and 7.6 ± 6.7 mmHg, respectively, compared to controls that experienced increases in PaCO₂ and PmvCO₂ of 17.9 ± 11.7 mmHg and 18.3 ± 11.2 mmHg. We conclude that colonic delivery of OMB therapy has potential to treat patients experiencing severe hypoxemic respiratory failure.

Oxygen therapy alternatives in COVID-19: From classical to nanomedicine

Around 10-15% of COVID-19 patients affected by the Delta and the Omicron variants exhibit acute respiratory insufficiency and require intensive care unit admission to receive advanced respiratory support. However, the current ventilation methods display several limitations, including lung injury, dysphagia, respiratory muscle atrophy, and hemorrhage. Furthermore, most of the ventilatory techniques currently offered require highly trained professionals and oxygen cylinders, which may attain short supply owing to the high demand and misuse. Therefore, the search for new alternatives for oxygen therapeutics has become extremely important for maintaining gas exchange in patients affected by COVID-19. This review highlights and suggest new alternatives based on micro and nanostructures capable of supplying oxygen and/or enabling hematosis during moderate or acute COVID-19 cases.

Tissue Engineering and Stem Cell Therapy in Pediatric Urology

The rapidly expanding field of tissue engineering along with stem cell therapy has a promising future in pediatric urological conditions. The initial struggle seemed difficult in renal regeneration but a functional biounit has been developed. Urine excretion has been demonstrated successfully from stem cell-generated embryonic kidneys. Three-dimensional (3D) stem cell-derived organoids are the new paradigm in research. Techniques to regenerate bladder tissue have reached the clinic, and the urethra is close behind. 3D bioprinted urethras would soon be available. Artificial germ cells produced from mouse pluripotent stem cells have been shown to give rise to live progeny. Myoblast and fibroblast therapy has been safely and effectively used for urinary incontinence. Stress urinary incontinence has been clinically treated with muscle-derived stem cells. Skeletal muscle-derived stem cells have been shown to get converted into smooth muscle cells when implanted into the corpora cavernosa in animal models. This review encompasses the various experimental and clinical developments in this field that can benefit pediatric urological conditions with the contemporary developments in the field.

Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering

When adipose tissue (AT) is impaired by trauma or disease, AT engineering could provide a shelf-ready structural and functional restoration as alternative to current clinical treatments, which mainly aim at aesthetic replacement. Yet, the lack of an efficient vascular network within the scaffolds represents a major limitation to their translation application in patients. Here, we propose the use of microstructured crosslinked gelatin hydrogels with an embedded prevascular channel as scaffolding materials for AT engineering. The scaffolds are fabricated using - simultaneously - alginate-based microbeads and 3D printed filaments as sacrificial material encapsulated in gelatin at the point of material fabrication and removed post-crosslinking. This method yields the formation of microstructures that resemble the micro-architecture of physiological human fat tissue and of microvessels that can facilitate vascularization through anastomosis with patients' own blood vessels. The cytocompatible method used to prepare the gelatin scaffolds showed structural stability over time while allowing for cell infiltration and protease-based remodeling/degradation. Scaffolds' mechanical properties were also designed to mimic the one of natural breast adipose tissue, a key parameter for AT regeneration. Scaffold's embedded channel (∅ = 300-400 µm) allowed for cell infiltration and enabled blood flow in vitro when an anastomosis with a rat blood artery was performed using surgical glue. In vitro tests with human mesenchymal stem cells (hMSC) showed colonization of the porous structure of the gelatin hydrogels, differentiation into adipocytes and accumulation of lipid droplets, as shown by Oil Red O staining. STATEMENT OF SIGNIFICANCE: The potential clinical use of scaffolds for adipose tissue (AT) regeneration is currently limited by an unmet simultaneous achievement of adequate structural/morphological properties together with a promoted scaffold vascularization. Sacrificial materials, currently used either to obtain a tissue-mimicking structure or hollow channels to promote scaffold' vascularization, are powerful versatile tools for the fabrication of scaffolds with desired features. However, an integrated approach by means of sacrificial templates aiming at simultaneously achieving an adequate AT-mimicking structure and hollow channels for vascularization is missing. Here, we prove the suitability of crosslinked gelatin scaffolds obtained by using sacrificial alginate microbeads and 3D printed strands to achieve proper features and hollow channels useful for scaffolds vascularization.

Tissue engineering in pediatric urology - a critical appraisal

Tissue engineering is defined as the combination of biomaterials and bioengineering principles together with cell transplantation or directed growth of host cells to develop a biological replacement tissue or organ that can be a substitute for normal tissue both in structure and function. Despite early promising preclinical studies, clinical translation of tissue engineering in pediatric urology into humans has been unsuccessful both for cell-seeded and acellular scaffolds. This can be ascribed to various factors, including the use of only non-diseased models that inaccurately describe the structural and functional modifications of diseased tissue. The paper addresses potential future strategies to overcome the limitations experienced in clinical applications so far. This includes the use of stem cells of various origins (mesenchymal stem cells, hematopoietic stem/progenitor cells, urine-derived stem cells, and progenitor cells of the urothelium) as well as the need for a deeper understanding of signaling pathways and directing tissue ingrowth and differentiation through the concept of dynamic reciprocity. The development of smart scaffolds that release trophic factors in a set and timely manner will probably improve regeneration. Modulation of innate immune response as a major contributor to tissue regeneration outcome is also addressed. It is unlikely that only one of these strategies alone will lead to clinically applicable tissue engineering strategies in pediatric urology. In the meanwhile, the fundamental new insights into regenerative processes already obtained in the attempts of tissue engineering of the lower urogenital tract remain our greatest gain.

Decellularized and matured esophageal scaffold for circumferential esophagus replacement: Proof of concept in a pig model

Surgical resection of the esophagus requires sacrificing a long portion of it. Its replacement by the demanding gastric pull-up or colonic interposition techniques may be avoided by using short biologic scaffolds composed of decellularized matrix (DM). The aim of this study was to prepare, characterize, and assess the in vivo remodeling of DM and its clinical impact in a preclinical model. A dynamic chemical and enzymatic decellularization protocol of porcine esophagus was set up and optimized. The resulting DM was mechanically and biologically characterized by DNA quantification, histology, and histomorphometry techniques. Then, in vitro and in vivo tests were performed, such as DM recellularization with human or porcine adipose-derived stem cells, or porcine stromal vascular fraction, and maturation in rat omentum. Finally, the DM, matured or not, was implanted as a 5-cm-long esophagus substitute in an esophagectomized pig model. The developed protocol for esophageal DM fulfilled previously established criteria of decellularization and resulted in a scaffold that maintained important biologic components and an ultrastructure consistent with a basement membrane complex. In vivo implantation was compatible with life without major clinical complications. The DM's scaffold in vitro characteristics and in vivo implantation showed a pattern of constructive remodeling mimicking major native esophageal characteristics.

Engineering a Cell Home for Stem Cell Homing and Accommodation

Distilling complexity to advance regenerative medicine from laboratory animals to humans, in situ regeneration will continue to evolve using biomaterial strategies to drive endogenous cells within the human body for therapeutic purposes; this approach avoids the need for delivering ex vivo-expanded cellular materials. Ensuring the recruitment of a significant number of reparative cells from an endogenous source to the site of interest is the first step toward achieving success. Subsequently, making the "cell home" cell-friendly by recapitulating the natural extracellular matrix (ECM) in terms of its chemistry, structure, dynamics, and function, and targeting specific aspects of the native stem cell niche (e.g., cell-ECM and cell-cell interactions) to program and steer the fates of those recruited stem cells play equally crucial roles in yielding a therapeutically regenerative solution. This review addresses the key aspects of material-guided cell homing and the engineering of novel biomaterials with desirable ECM composition, surface topography, biochemistry, and mechanical properties that can present both biochemical and physical cues required for in situ tissue regeneration. This growing body of knowledge will likely become a design basis for the development of regenerative biomaterials for, but not limited to, future in situ tissue engineering and regeneration.

Silk Fibroin as Edible Coating for Perishable Food Preservation

The regeneration of structural biopolymers into micelles or nanoparticles suspended in water has enabled the design of new materials with unique and compelling properties that can serve at the interface between the biotic and the abiotic worlds. In this study, we leveraged silk fibroin quintessential properties (i.e. polymorphism, conformability and hydrophobicity) to design a water-based protein suspension that self-assembles on the surface of food upon dip coating. The water-based post-processing control of the protein polymorphism enables the modulation of the diffusion of gases through the silk fibroin thin membranes (e.g. O₂ and CO₂ diffusion, water vapour permeability), which is a key parameter to manage food freshness. In particular, an increased beta-sheet content corresponds to a reduction in oxygen diffusion through silk fibroin thin films. By using the dip coating of strawberries and bananas as proof of principle, we have shown that the formation of micrometre-thin silk fibroin membranes around the fruits helps the management of postharvest physiology of the fruits. Thus, silk fibroin coatings enhance fruits’ shelf life at room conditions by reducing cell respiration rate and water evaporation. The water-based processing and edible nature of silk fibroin makes this approach a promising alternative for food preservation with a naturally derived material.

Tailored freestanding multilayered membranes based on chitosan and alginate

Engineering metabolically demanding tissues requires the supply of nutrients, oxygen, and removal of metabolic byproducts, as well as adequate mechanical properties. In this work, we propose the development of chitosan (CHIT)/alginate (ALG) freestanding membranes fabricated by layer-by-layer (LbL) assembly. CHIT/ALG membranes were cross-linked with genipin at a concentration of 1 mg·mL(-1) or 5 mg·mL(-1). Mass transport properties of glucose and oxygen were evaluated on the freestanding membranes. The diffusion of glucose and oxygen decreases with increasing cross-linking concentration. Mechanical properties were also evaluated in physiological-simulated conditions. Increasing cross-linking density leads to an increase of storage modulus, Young modulus, and ultimate tensile strength, but to a decrease in the maximum hydrostatic pressure. The in vitro biological performance demonstrates that cross-linked films are more favorable for cell adhesion. This work demonstrates the versatility and feasibility of LbL assembly to generate nanostructured constructs with tunable permeability, mechanical, and biological properties.

Mass transfer analysis of growth and substance metabolism of NSCs cultured in collagen-based scaffold in vitro

The aim of this study is to analyze the growth and substance metabolism of neural stem cells (NSCs) cultured in biological collagen-based scaffolds. Mass transfer and metabolism model of glucose, lactic acid, and dissolved oxygen (DO) were established and solved on MATLAB platform to obtain the concentration distributions of DO, glucose, and lactic acid in culture system, respectively. Calculation results showed that the DO influenced their normal growth and metabolism of NSCs mostly in the in vitro culture within collagen-based scaffolds. This study also confirmed that 2-mm thickness of collagen scaffold was capable of in vitro cultivation and growth of NSCs with an inoculating density of 1 × 10(6) cells/mL.

Native extracellular matrix: a new scaffolding platform for repair of damaged muscle

Effective clinical treatments for volumetric muscle loss resulting from traumatic injury or resection of a large amount of muscle mass are not available to date. Tissue engineering may represent an alternative treatment approach. Decellularization of tissues and whole organs is a recently introduced platform technology for creating scaffolding materials for tissue engineering and regenerative medicine. The muscle stem cell niche is composed of a three-dimensional architecture of fibrous proteins, proteoglycans, and glycosaminoglycans, synthesized by the resident cells that form an intricate extracellular matrix (ECM) network in equilibrium with the surrounding cells and growth factors. A consistent body of evidence indicates that ECM proteins regulate stem cell differentiation and renewal and are highly relevant to tissue engineering applications. The ECM also provides a supportive medium for blood or lymphatic vessels and for nerves. Thus, the ECM is the nature's ideal biological scaffold material. ECM-based bioscaffolds can be recellularized to create potentially functional constructs as a regenerative medicine strategy for organ replacement or tissue repopulation. This article reviews current strategies for the repair of damaged muscle using bioscaffolds obtained from animal ECM by decellularization of small intestinal submucosa (SIS), urinary bladder mucosa (UB), and skeletal muscle, and proposes some innovative approaches for the application of such strategies in the clinical setting.

Evaluation of the Effective Diffusivity of a Freeform Fabricated Scaffold Using Computational Simulation

In scaffold-based tissue engineering, sufficient oxygen and nutrient supply into cells within a scaffold is essential to increase cell viability and the proliferation rate. Generally, oxygen and nutrients reach the cells through the media by diffusion in vitro or in vivo, assuming there is no convection flow through a scaffold with small-sized pores. The scaffold diffusion rate depends mainly on the scaffold pore architecture. Thus, understanding the effect of scaffold pore architecture on the diffusion mechanism is necessary to design an efficient scaffold model. This study proposes a computational method to estimate diffusivity using the finite element analysis (FEA). This method can be applied to evaluate and analyze the effective diffusivity of a freeform fabricated 3D scaffold. The diffusion application module of commercial FEA software was used to calculate the spatial oxygen concentration gradient in a scaffold model medium. The effective diffusivities of each scaffold could be calculated from the oxygen concentration data, which revealed that the scaffold pore architecture influences its effective diffusivity. The proposed method has been verified experimentally and can be applied to design pore architectures with efficient diffusion by increasing our understanding of how the diffusion rate within a scaffold is affected by its pore architecture.

Nonsteady state oxygen transport in engineered tissue: implications for design

Engineered tissue constructs are limited in size, and thus clinical relevance, when diffusion is the primary mode of oxygen transport. Understanding the extent of oxygen diffusion and cellular consumption is necessary for the design of engineered tissues, particularly those intended for implantation into hypoxic wound sites. This study presents a combined experimental and computation model to predict design constraints for cellularized fibrin tissues subjected to a step change in the oxygen concentration to simulate transplantation. Nonsteady state analysis of oxygen diffusion and consumption was used to estimate the diffusion coefficient of oxygen (mean±SD, 1.7×10(-9)±8.4×10(-11) m(2)/s) in fibrin hydrogels as well as the Michaelis-Menten parameters, Vmax (1.3×10(-17)±9.2×10(-19) mol·cell(-1)·s(-1)), and Km (8.0×10(-3)±3.5×0(-3) mol/m(3)), of normal human lung fibroblasts. Nondimensionalization of the governing diffusion-reaction equation enabled the creation of a single dimensionless parameter, the Thiele modulus (φ), which encompasses the combined effects of oxygen diffusion, consumption, and tissue dimensions. Tissue thickness is the design parameter with the most pronounced influence on the distribution of oxygen within the system. Additionally, tissues designed such that φ<1 achieve a near spatially uniform and adequate oxygen concentration following the step change. Understanding and optimizing the Thiele modulus will improve the design of engineered tissue implants.

Small intestinal submucosa segments as matrix for tissue engineering: review

Tissue engineering (TE) is an emerging interdisciplinary field aiming at the restoration or improvement of impaired tissue function. A combination of cells, scaffold materials, engineering methods, and biochemical and physiological factors is employed to generate the desired tissue substitute. Scaffolds often play a pivotal role in the engineering process supporting a three-dimensional tissue formation. The ideal scaffold should mimic the native extracellular environment providing mechanical and biological properties to allow cell attachment, migration, and differentiation, as well as remodeling by the host organism. The scaffold should be nonimmunogenic and should ideally be resorbed by the host over time, leaving behind only the regenerated tissue. More than 40 years ago, a preparation of the small intestine was introduced for the replacement of vascular structures. Since then the small intestinal submucosa (SIS) has gained a lot of interest in TE and subsequent clinical applications, as this material exhibits key features of a highly supportive scaffold. This review will focus on the general properties of the SIS and its applications in therapeutical approaches as well as in generating tissue substitutes in vitro. Furthermore, the main problem of TE, which is the insufficient nourishment of cells within three-dimensional, artificial tissues exceeding certain dimensions is addressed. To solve this issue the implementation of another small intestine-derived preparation, the biological vascularized matrix (BioVaM), could be a feasible option. The BioVaM comprises in addition to SIS the arterial and venous mesenteric pedicles and exhibits thereby a perfusable vessel bed that is preserved after decellularization.

Design and development of tissue engineered lung: Progress and challenges

Before we can realize our long term goal of engineering lung tissue worthy of clinical applications, advances in the identification and utilization of cell sources, development of standardized procedures for differentiation of cells, production of matrix tailored to meet the needs of the lung and design of methods or techniques of applying the engineered tissues into the injured lung environment will need to occur. Design of better biomaterials with the capacity to guide stem cell behavior and facilitate lung lineage choice as well as seamlessly integrate with living lung tissue will be achieved through advances in the development of decellularized matrices and new understandings related to the influence of extracellular matrix on cell behavior and function. We have strong hopes that recent developments in the engineering of conducting airway from decellularized trachea will lead to similar breakthroughs in the engineering of distal lung components in the future.

Diffusion of rhodamine B and bovine serum albumin in fibrin gels seeded with primary endothelial cells

Scaffolds with adequate mass transport properties are needed in many tissue engineering applications. Fibrin is considered a good biological material to fabricate such scaffolds. However, very little is known about mass transport in fibrin. Therefore, a method based on the analysis of fluorescence intensity for measuring the apparent diffusion coefficient of rhodamine B and fluorescein-labelled bovine serum albumin (FITC-BSA) is described. The experiments are performed in fibrin gels with and without human umbilical vein endothelial cells (HUVEC). The apparent diffusion coefficients of rhodamine B and FITC-BSA in fibrin (fibrinogen concentration of 4 mg/mL) with different cell densities are reported. A LIVE/DEAD(®) assay is performed to confirm the viability of HUVEC seeded at high densities. Diffusion coefficients for rhodamine B remain more or less constant up to 5×10(5) cells/mL and correlate well with literature values measured by other methods in water systems. This indicates that the presence of HUVEC in the fibrin gels (up to 5×10(5) cells/mL) has almost no effect on the diffusion coefficients. Higher cell densities (>5×10(5) cells/mL) result in a decrease of the diffusion coefficients. Diffusion coefficients of rhodamine B and FITC-BSA obtained by this method agree with diffusion coefficients in water predicted by the Stokes-Einstein equation. The experimental design used in this study can be applied to measure diffusion coefficients in different types of gels seeded or not with living cells.

The realistic prediction of oxygen transport in a tissue-engineered scaffold by introducing time-varying effective diffusion coefficients

An adequate oxygen supply is one of the most important factors needed in order to regenerate or engineer thick tissues or complex organs. To devise a method for maximizing the amount of oxygen available to cells, it is necessary to understand and to realistically predict oxygen transport within an engineered tissue. In this study, we focused on the fact that oxygen transport through a tissue-engineered scaffold may vary with time as cells proliferate. To confirm this viewpoint, effective oxygen diffusion coefficients (D(e)(,)(s)) of scaffolds were deduced from experimental measurements and simulations of oxygen-concentration profiles were performed using these D(e)(,)(s) values in a two-dimensional (2-D) perfusion model. The results of this study indicate that higher porosity, hydraulic permeability and interconnectivity of scaffolds with no cells are responsible for the prominent diffusion capability quantified using D(e)(,)(s). On the other hand, the D(e)(,)(s) of scaffolds with cells has a negative linear relationship with cell density. Cell proliferation with time leads to a significant decrease in oxygen concentration in the 2-D perfusion model. This result demonstrates the gradual restriction of oxygen transport in a porous scaffold during cell culture. Therefore, the realistic prediction of oxygen transport using a time-varying D(e)(,)(s) will provide an appropriate basis for designing optimal transport networks within a thick scaffold.

Engineering a stem cell house into a home

In the body, tissue homeostasis is established and maintained by resident tissue-specific adult stem cells (aSCs). Through preservation of bidirectional communications with the surrounding niche and integration of biophysical and biochemical cues, aSCs actively direct the regeneration of aged, injured and diseased tissues. Currently, the ability to guide the behavior and fate of aSCs in the body or in culture after prospective isolation is hindered by our poor comprehension of niche composition and the regulation it imposes. Two-and three-dimensional biomaterials approaches permit systematic analysis of putative niche elements as well as screening approaches to identify novel regulatory mechanisms governing stem cell fate. The marriage of stem cell biology with creative bioengineering technology has the potential to expand our basic understanding of stem cell regulation imposed by the niche and to develop novel regenerative medicine applications.

Development of a decellularized lung bioreactor system for bioengineering the lung: the matrix reloaded

We developed a decellularized murine lung matrix bioreactor system that could be used to evaluate the potential of stem cells to regenerate lung tissue. Lungs from 2-3-month-old C57BL/6 female mice were excised en bloc with the trachea and heart, and decellularized with sequential solutions of distilled water, detergents, NaCl, and porcine pancreatic DNase. The remaining matrix was cannulated and suspended in small airway growth medium, attached to a ventilator to simulate normal, murine breathing-induced stretch. After 7 days in an incubator, lung matrices were analyzed histologically. Scanning electron microscopy and histochemical staining demonstrated that the pulmonary matrix was intact and that the geographic placement of the proximal and distal airways, alveoli and vessels, and the basement membrane of these structures all remained intact. Decellularization was confirmed by the absence of nuclear 4',6-diamidino-2-phenylindole staining and negative polymerase chain reaction for genomic DNA. Collagen content was maintained at normal levels. Elastin, laminin, and glycosaminglycans were also present, although at lower levels compared to nondecellularized lungs. The decellularized lung matrix bioreactor was capable of supporting growth of fetal alveolar type II cells. Analysis of day 7 cryosections of fetal-cell-injected lung matrices showed pro-Sp-C, cytokeratin 18, and 4',6-diamidino-2-phenylindole-positive cells lining alveolar areas that appeared to be attached to the matrix. These data illustrate the potential of using decellularized lungs as a natural three-dimensional bioengineering matrix as well as provide a model for the study of lung regeneration from pulmonary stem cells.

Surface characterization of extracellular matrix scaffolds

Extracellular matrix (ECM) scaffolds prepared from different tissue sources or using different methods have been demonstrated to have distinctive effects upon cell adhesion patterns and the ability to support and maintain differentiated phenotypes. It is unknown whether the molecular composition or the ultrastructure of the ECM plays a greater role in determining the phenotype of the cells with which it comes into contact. However, when implanted, the topology and ligand landscape of the material will determine the host molecules that bind and the type and behavior of cells that mediate the host response. Therefore, a comprehensive understanding of surface characteristics is essential in the design of scaffolds for specific clinical applications. The surface characteristics of ECM scaffolds derived from porcine urinary bladder, small intestine, and liver as well as the effects of two commonly used methods of chemical cross-linking upon UBM were investigated. Electron microscopy and time of flight secondary ion mass spectroscopy were used to examine the surface characteristics of the scaffolds. The results show that ECM scaffolds have unique morphologic and structural properties which are dependant on the organ or tissue from which the scaffold is harvested. Furthermore, the results show that the surface characteristics of an ECM scaffold are changed through chemical cross-linking.