1
|
van Minnen BS, van Tienen TG. The Current State of Meniscus Replacements. Curr Rev Musculoskelet Med 2024:10.1007/s12178-024-09902-1. [PMID: 38744802 DOI: 10.1007/s12178-024-09902-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Accepted: 04/29/2024] [Indexed: 05/16/2024]
Abstract
PURPOSE OF REVIEW The field of meniscus replacement is changing continuously, with new devices emerging and others disappearing from the market. With the current tendency to preserve the knee joint, meniscus implants may become more relevant than ever. The purpose of this review is to provide an overview of the current state of partial and total meniscus replacements that have been developed beyond the academic phase. The available clinical and pre-clinical data is evaluated, and omissions are identified. RECENT FINDINGS Recent systematic reviews have shown a lack of homogenous clinical data on the CMI and Actifit meniscal scaffolds, especially regarding long-term performance without concomitant surgical interventions. Clinical studies on the medial total meniscus prostheses NUsurface and Artimis are ongoing, with the NUsurface being several years ahead. New techniques for meniscus replacement are rapidly developing, including the Artimis lateral meniscus prosthesis and the MeniscoFix 3D-printed scaffold. All evaluated clinical studies point towards improved clinical outcomes after implantation of partial and total meniscus replacements. Long-term data on survival and performance is of low quality for CMI and Actifit and is unavailable yet for NUsurface and Artimis. It is of major importance that future research focuses on optimizing fixation methods and identifying the optimal treatment strategy for each patient group. New techniques for total and partial replacement of the medial and lateral meniscus will be followed with interest.
Collapse
Affiliation(s)
- B S van Minnen
- Orthopaedic Research Lab, Radboud University Medical Centre, Radboud Institute for Health Sciences, P.O. Box 9101, 6500 HB, Nijmegen, The Netherlands.
- ATRO Medical BV, Liessentstraat 9A, 5405 AH, Uden, The Netherlands.
| | - T G van Tienen
- Orthopaedic Research Lab, Radboud University Medical Centre, Radboud Institute for Health Sciences, P.O. Box 9101, 6500 HB, Nijmegen, The Netherlands
- ATRO Medical BV, Liessentstraat 9A, 5405 AH, Uden, The Netherlands
| |
Collapse
|
2
|
Lopez SG, Kim J, Estroff LA, Bonassar LJ. Removal of GAGs Regulates Mechanical Properties, Collagen Fiber Formation, and Alignment in Tissue Engineered Meniscus. ACS Biomater Sci Eng 2023; 9:1608-1619. [PMID: 36802372 DOI: 10.1021/acsbiomaterials.3c00136] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/23/2023]
Abstract
The complex fibrillar architecture of native meniscus is essential for proper function and difficult to recapitulate in vitro. In the native meniscus, proteoglycan content is low during the development of collagen fibers and progressively increases with aging. In vitro, fibrochondrocytes produce glycosaminoglycans (GAGs) early in culture, in contrast to native tissue, where they are deposited after collagen fibers have formed. This difference in the timing of GAG production hinders the formation of a mature fiber network in such in vitro models. In this study, we removed GAGs from collagen gel-based tissue engineered constructs using chondroitinase ABC (cABC) and evaluated the effect on the formation and alignment of collagen fibers and the subsequent effect on tensile and compressive mechanical properties. Removal of GAGs during maturation of in vitro constructs improved collagen fiber alignment in tissue engineered meniscus constructs. Additionally, removal of GAGs during maturation improved fiber alignment without compromising compressive strength, and this removal improved not only fiber alignment and formation but also tensile properties. The increased fiber organization in cABC-treated groups also appeared to influence the size, shape, and location of defects in these constructs, suggesting that treatment may prevent the propagation of large defects under loading. This data gives another method of modulating the ECM for improved collagen fiber formation and mechanical properties in tissue engineered constructs.
Collapse
Affiliation(s)
- Serafina G Lopez
- Meinig School of Biomedical Engineering, Cornell University, Ithaca, New York 14853, United States
| | - Jongkil Kim
- Meinig School of Biomedical Engineering, Cornell University, Ithaca, New York 14853, United States
| | - Lara A Estroff
- Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States
- Kavli Institute for Nanoscale Science at Cornell, Cornell University, Ithaca, New York 14853, United States
| | - Lawrence J Bonassar
- Meinig School of Biomedical Engineering, Cornell University, Ithaca, New York 14853, United States
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, New York 14853, United States
| |
Collapse
|
3
|
Zhou YF, Zhang D, Yan WT, Lian K, Zhang ZZ. Meniscus Regeneration With Multipotent Stromal Cell Therapies. Front Bioeng Biotechnol 2022; 10:796408. [PMID: 35237572 PMCID: PMC8883323 DOI: 10.3389/fbioe.2022.796408] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2021] [Accepted: 01/11/2022] [Indexed: 12/20/2022] Open
Abstract
Meniscus is a semilunar wedge-shaped structure with fibrocartilaginous tissue, which plays an essential role in preventing the deterioration and degeneration of articular cartilage. Lesions or degenerations of it can lead to the change of biomechanical properties in the joints, which ultimately accelerate the degeneration of articular cartilage. Even with the manual intervention, lesions in the avascular region are difficult to be healed. Recent development in regenerative medicine of multipotent stromal cells (MSCs) has been investigated for the significant therapeutic potential in the repair of meniscal injuries. In this review, we provide a summary of the sources of MSCs involved in repairing and regenerative techniques, as well as the discussion of the avenues to utilizing these cells in MSC therapies. Finally, current progress on biomaterial implants was reviewed.
Collapse
Affiliation(s)
- Yun-Feng Zhou
- Department of Orthopedics, Xiangyang No.1 People’s Hospital, Hubei University of Medicine, Xiangyang, China
- Department of Orthopedics, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
| | - Di Zhang
- Department of Obstetrics-Gynecology, Xiangyang No.1 People’s Hospital, Hubei University of Medicine, Xiangyang, China
| | - Wan-Ting Yan
- Department of Orthopedics, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
- School of Medicine, Sun Yat-sen University, Shenzhen, China
| | - Kai Lian
- Department of Orthopedics, Xiangyang No.1 People’s Hospital, Hubei University of Medicine, Xiangyang, China
- *Correspondence: Zheng-Zheng Zhang, ; Kai Lian,
| | - Zheng-Zheng Zhang
- Department of Orthopedics, Sun Yat-sen Memorial Hospital, Sun Yat-sen University, Guangzhou, China
- *Correspondence: Zheng-Zheng Zhang, ; Kai Lian,
| |
Collapse
|
4
|
Wang X, Ding Y, Li H, Mo X, Wu J. Advances in electrospun scaffolds for meniscus tissue engineering and regeneration. J Biomed Mater Res B Appl Biomater 2021; 110:923-949. [PMID: 34619021 DOI: 10.1002/jbm.b.34952] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2020] [Revised: 07/14/2021] [Accepted: 09/22/2021] [Indexed: 01/14/2023]
Abstract
The meniscus plays a critical role in maintaining the homeostasis, biomechanics, and structural stability of the knee joint. Unfortunately, it is predisposed to damages either from sports-related trauma or age-related degeneration. The meniscus has an inherently limited capacity for tissue regeneration. Self-healing of injured adult menisci only occurs in the peripheral vascularized portion, while the spontaneous repair of the inner avascular region seems never happens. Repair, replacement, and regeneration of menisci through tissue engineering strategies are promising to address this problem. Recently, many scaffolds for meniscus tissue engineering have been proposed for both experimental and preclinical investigations. Electrospinning is a feasible and versatile technique to produce nano- to micro-scale fibers that mimic the microarchitecture of native extracellular matrix and is an effective approach to prepare nanofibrous scaffolds for constructing engineered meniscus. Electrospun scaffolds are reported to be capable of inducing colonization of meniscus cells by modulating local extracellular density and stimulating endogenous regeneration by driving reprogramming of meniscus wound microenvironment. Electrospun nanofibrous scaffolds with tunable mechanical properties, controllable anisotropy, and various porosities have shown promises for meniscus repair and regeneration and will undoubtedly inspire more efforts in exploring effective therapeutic approaches towards clinical applications. In this article, we review the current advances in the use of electrospun nanofibrous scaffolds for meniscus tissue engineering and repair and discuss prospects for future studies.
Collapse
Affiliation(s)
- Xiaoyu Wang
- Key Laboratory of Science and Technology of Eco-Textile & Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Yangfan Ding
- Key Laboratory of Science and Technology of Eco-Textile & Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Haiyan Li
- Key Laboratory of Science and Technology of Eco-Textile & Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Xiumei Mo
- Key Laboratory of Science and Technology of Eco-Textile & Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Jinglei Wu
- Key Laboratory of Science and Technology of Eco-Textile & Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China.,Department of Plastic and Reconstructive Surgery, Shanghai Key Laboratory of Tissue Engineering, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, China
| |
Collapse
|
5
|
Miles CE, Lima MR, Buevich F, Gwin C, Sanjeeva Murthy N, Kohn J. Comprehensive hydrolytic degradation study of a new poly(ester-amide) used for total meniscus replacement. Polym Degrad Stab 2021. [DOI: 10.1016/j.polymdegradstab.2021.109617] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
6
|
Kim J, Boys AJ, Estroff LA, Bonassar LJ. Combining TGF-β1 and Mechanical Anchoring to Enhance Collagen Fiber Formation and Alignment in Tissue-Engineered Menisci. ACS Biomater Sci Eng 2021; 7:1608-1620. [PMID: 33606521 DOI: 10.1021/acsbiomaterials.0c01791] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Abstract
Recapitulating the collagen fiber structure of native menisci is one of the major challenges in the development of tissue-engineered menisci. Native collagen fibers are developed by the complex interplay of biochemical and biomechanical signals. In this study, we optimized glucose and transforming growth factor-β1 (TGF-β1) concentrations in combination with mechanical anchoring to balance contributions of proteoglycan synthesis and contractile behavior in collagen fiber assembly. Glucose had a profound effect on the final dimensions of collagen-based constructs. TGF-β1 influenced construct contraction rate and glycosaminoglycan (GAG) production with two half-maximal effective concentration (EC50) ranges, which are 0.23 to 0.28 and 0.53 to 1.71 ng/mL, respectively. At concentrations less than the EC50, for the GAG production and contraction rate, TGF-β1 treatment resulted in less organized collagen fibers. At concentrations greater than the EC50, TGF-β1 led to dense, disorganized collagen fibers. Between the two EC50 values, collagen fiber diameter and length increased. The effects of TGF-β1 on fiber development were enhanced by mechanical anchoring, leading to peaks in fiber diameter, length, and alignment index. Fiber diameter and length increased from 7.9 ± 1.4 and 148.7 ± 16.4 to 17.5 ± 2.1 and 262.0 ± 13.0 μm, respectively. The alignment index reached 1.31, comparable to that of native tissue, 1.40. These enhancements in fiber architecture resulted in significant increases in tensile modulus and ultimate tensile stress (UTS) by 1.6- and 1.4-fold. Correlation analysis showed that tensile modulus and UTS strongly correlated with collagen fiber length, diameter, and alignment, while compressive modulus correlated with GAG content. These outcomes highlight the need for optimization of both biochemical and biomechanical cues in the culture environment for enhancing fiber development within tissue-engineered constructs.
Collapse
Affiliation(s)
- Jongkil Kim
- Meinig of Biomedical Engineering, Cornell University, 237 Tower Road, Ithaca, New York 14853, United States
| | - Alexander J Boys
- Department of Materials Science and Engineering, Cornell University, 126 Hollister Drive, Ithaca, New York 14853, United States
| | - Lara A Estroff
- Department of Materials Science and Engineering, Cornell University, 126 Hollister Drive, Ithaca, New York 14853, United States.,Kavli Institute at Cornell for Nanoscale Science, Cornell University, 245 East Avenue, Ithaca, New York 14853, United States
| | - Lawrence J Bonassar
- Meinig of Biomedical Engineering, Cornell University, 237 Tower Road, Ithaca, New York 14853, United States.,Sibley School of Mechanical and Aerospace Engineering, Cornell University, 313 Campus Road, Ithaca, New York 14853, United States
| |
Collapse
|
7
|
Inyang AO, Vaughan CL. Functional Characteristics and Mechanical Performance of PCU Composites for Knee Meniscus Replacement. MATERIALS 2020; 13:ma13081886. [PMID: 32316407 PMCID: PMC7215399 DOI: 10.3390/ma13081886] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/27/2020] [Revised: 03/28/2020] [Accepted: 03/30/2020] [Indexed: 12/14/2022]
Abstract
The potential use of fiber-reinforced based polycarbonate-urethanes (PCUs) as candidate meniscal substitutes was investigated in this study. Mechanical test pieces were designed and fabricated using a compression molding technique. Ultra-High Molecular Weight Polyethylene (UHMWPE) fibers were impregnated into PCU matrices, and their mechanical and microstructural properties evaluated. In particular, the tensile moduli of the PCUs were found unsuitable, since they were comparatively lower than that of the meniscus, and may not be able to replicate the inherent role of the meniscus effectively. However, the inclusion of fibers produced a substantial increment in the tensile modulus, to a value within a close range measured for meniscus tissues. Increments of up to 227% were calculated with a PCU fiber reinforcement composite. The embedded fibers in the PCU composites enhanced the fracture mechanisms by preventing the brittle failure and plastic deformation exhibited in fractured PCUs. The behavior of the composites in compression varied with respect to the PCU matrix materials. The mechanical characteristics demonstrated by the developed PCU composites suggest that fiber reinforcements have a considerable potential to duplicate the distinct and multifaceted biomechanical roles of the meniscus.
Collapse
|
8
|
McCorry MC, Kim J, Springer NL, Sandy J, Plaas A, Bonassar LJ. Regulation of proteoglycan production by varying glucose concentrations controls fiber formation in tissue engineered menisci. Acta Biomater 2019; 100:173-183. [PMID: 31546030 DOI: 10.1016/j.actbio.2019.09.026] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2019] [Revised: 08/30/2019] [Accepted: 09/17/2019] [Indexed: 12/11/2022]
Abstract
Fibrillar collagens are highly prevalent in the extracellular matrix of all connective tissues and therefore commonly used as a biomaterial in tissue engineering applications. In the native environment, collagen fibers are arranged in a complex hierarchical structure that is often difficult to recreate in a tissue engineered construct. Small leucine rich proteoglycans as well as hyaluronan binding proteoglycans, aggrecan and versican, have been implicated in regulating fiber formation. In this study, we modified proteoglycan production in vitro by altering culture medium glucose concentrations (4500, 1000, 500, 250, and 125 mg/L), and evaluated its effect on the formation of collagen fibers inside tissue engineered meniscal constructs. Reduction of extracellular glucose resulted in a dose dependent decrease in total sulfated glycosaminoglycan (GAG) production, but minimal decreases of decorin and biglycan. However, fibromodulin doubled in production between 125 and 4500 mg/L glucose concentration. A peak in fiber formation was observed at 500 mg/L glucose concentration and corresponded with reductions in total GAG production. Fiber formation reduction at 125 and 250 mg/L glucose concentrations are likely due to changes in metabolic activity associated with a limited supply of glucose. These results point to proteoglycan production as a means to manipulate fiber architecture in tissue engineered constructs. STATEMENT OF SIGNIFICANCE: Fibrillar collagens are highly prevalent in the extracellular matrix of all connective tissues; however achieving appropriate assembly and organization of collagen fibers in engineered connective tissues is a persistent challenge. Proteoglycans have been implicated in regulating collagen fiber organization both in vivo and in vitro, however little is known about methods to control proteoglycan production and the subsequent fiber organization in tissue engineered menisci. Here, we show that media glucose content can be optimized to control proteoglycan production and collagen fiber assembly, with optimal collagen fiber assembly occurring at sub-physiologic levels of glucose.
Collapse
|
9
|
Vadodaria K, Kulkarni A, Santhini E, Vasudevan P. Materials and structures used in meniscus repair and regeneration: a review. Biomedicine (Taipei) 2019; 9:2. [PMID: 30794149 PMCID: PMC6385612 DOI: 10.1051/bmdcn/2019090102] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2018] [Accepted: 12/19/2018] [Indexed: 12/13/2022] Open
Abstract
Meniscus is a vital functional unit in knee joint. It acts as a lubricating structure, a nutrient transporting structure, as well as shock absorber during jumping, twisting and running and offers stability within the knee joint. It helps in load distribution, in bearing the tensile hoop stresses and balancing by providing a cushion effect between hard surfaces of two bones. Meniscus may be injured in sports, dancing, accident or any over stressed condition. Any meniscal lesion can lead to a gradual development of osteoarthritis or erosion of bone contact surface due to disturbed load and contact stress distribution caused by injury/pain. Once injured, the possibilities of self-repair are rare in avascular region of meniscus, due to lack of blood supply in avascular region. Meniscus has vascular and avascular regions in structure. Majority of the meniscus parts turn avascular with increase in age. Purpose of this review is to highlight advances in meniscus repair with special focus on tissue engineering using textile/fiber based scaffolds, as well as the recent technical advances in scaffolds for meniscus recon- struction/ regeneration treatment.
Collapse
Affiliation(s)
- Ketankumar Vadodaria
- Centre of Excellence for Medical Textiles, The South India Textile Research Association, Coimbatore, Tamilnadu, India
| | - Abhilash Kulkarni
- Centre of Excellence for Medical Textiles, The South India Textile Research Association, Coimbatore, Tamilnadu, India
| | - E Santhini
- Centre of Excellence for Medical Textiles, The South India Textile Research Association, Coimbatore, Tamilnadu, India
| | - Prakash Vasudevan
- Centre of Excellence for Medical Textiles, The South India Textile Research Association, Coimbatore, Tamilnadu, India
| |
Collapse
|
10
|
Ghodbane SA, Patel JM, Brzezinski A, Lu TM, Gatt CJ, Dunn MG. Biomechanical characterization of a novel collagen-hyaluronan infused 3D-printed polymeric device for partial meniscus replacement. J Biomed Mater Res B Appl Biomater 2019; 107:2457-2465. [PMID: 30775847 DOI: 10.1002/jbm.b.34336] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2018] [Revised: 12/08/2018] [Accepted: 01/26/2019] [Indexed: 12/21/2022]
Abstract
The menisci transmit load by increasing the contact area and decreasing peak contact stresses on the articular surfaces. Meniscal lesions are among the most common orthopedic injuries, and resulting meniscectomies are associated with adverse polycaprolactone contact mechanics changes and, ultimately, an increased likelihood of osteoarthritis. Meniscus scaffolds were fabricated by 3D-printing a network of circumferential and radial filaments of resorbable polymer (poly(desaminotyrosyl-tyrosine dodecyl ester dodecanoate)) and infused with collagen-hyaluronan. The scaffold demonstrated an instantaneous compressive modulus (1.66 ± 0.44 MPa) comparable to native meniscus (1.52 ± 0.59 MPa). The scaffold aggregate modulus (1.33 ± 0.51 MPa) was within 2% of the native value (1.31 ± 0.36 MPa). In tension, the scaffold displayed a comparable stiffness to native tissue (127.6-97.1 N/mm) and an ultimate load of 33% of the native value. Suture pull-out load of scaffolds (83.1 ± 10.0 N) was within 10% of native values (91.5 ± 15.4 N). Contact stress analysis demonstrated the scaffold reduced peak contact stress by 60-67% and increased contact area by 38%, relative to partial meniscectomy. This is the first meniscal scaffold to match both the axial compressive properties and the circumferential tensile stiffness of the native meniscus. The improvement of joint contact mechanics, relative to partial meniscectomy alone, motivates further investigation using a large animal model. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2457-2465, 2019.
Collapse
Affiliation(s)
- Salim A Ghodbane
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers, The State University of New Jersey, Piscataway, New Jersey, USA
| | - Jay M Patel
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers, The State University of New Jersey, Piscataway, New Jersey, USA
| | - Andrzej Brzezinski
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA
| | - Tyler M Lu
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA
| | - Charles J Gatt
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers, The State University of New Jersey, Piscataway, New Jersey, USA
| | - Michael G Dunn
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences - Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers, The State University of New Jersey, Piscataway, New Jersey, USA
| |
Collapse
|
11
|
Stein SEC, von Luebken F, Warnecke D, Gentilini C, Skaer N, Walker R, Kessler O, Ignatius A, Duerselen L. The challenge of implant integration in partial meniscal replacement: an experimental study on a silk fibroin scaffold in sheep. Knee Surg Sports Traumatol Arthrosc 2019; 27:369-380. [PMID: 30264241 PMCID: PMC6394547 DOI: 10.1007/s00167-018-5160-7] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/07/2018] [Accepted: 09/24/2018] [Indexed: 02/03/2023]
Abstract
PURPOSE To restore meniscal function after excessive tissue damage, a silk fibroin implant for partial meniscal replacement was developed and investigated in an earlier sheep model. After 6 months implantation, it showed promising results in terms of chondroprotection and biocompatibility. To improve surgical fixation, the material was subjected to optimisation and a fibre mesh was integrated into the porous matrix. The aim of the study was the evaluation of this second generation of silk fibroin implants in a sheep model. METHODS Nine adult merino sheep received subtotal meniscal replacement using the silk fibroin scaffold. In nine additional animals, the defect was left untreated. Sham surgery was performed in another group of nine animals. After 6 months of implantation macroscopic, biomechanical and histological evaluations of the scaffold, meniscus, and articular cartilage were conducted. RESULTS Macroscopic evaluation revealed no signs of inflammation of the operated knee joint and most implants were located in the defect. However, there was no solid connection to the remaining peripheral meniscal rim and three devices showed a radial rupture at the middle zone. The equilibrium modulus of the scaffold increased after 6 months implantation time as identified by biomechanical testing (before implantation 0.6 ± 0.3 MPa; after implantation: 0.8 ± 0.3 MPa). Macroscopically and histologically visible softening and fibrillation of the articular cartilage in the meniscectomy- and implant group were confirmed biomechanically by indentation testing of the tibial cartilage. CONCLUSIONS In the current study, biocompatibility of the silk fibroin scaffold was reconfirmed. The initial mechanical properties of the silk fibroin implant resembled native meniscal tissue. However, stiffness of the scaffold increased considerably after implantation. This might have prevented integration of the device and chondroprotection of the underlying cartilage. Furthermore, the increased stiffness of the material is likely responsible for the partial destruction of some implants. Clinically, we learn that an inappropriate replacement device might lead to similar cartilage damage as seen after meniscectomy. Given the poor acceptance of the clinically available partial meniscal replacement devices, it can be speculated that development of a total meniscal replacement device might be the less challenging option.
Collapse
Affiliation(s)
- Svenja Emmi Catherine Stein
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstraße 14, 89081 Ulm, Germany
| | - Falk von Luebken
- Department of Trauma and Orthopaedic Surgery, Hospital of the German Armed Forces Ulm, Oberer Eselsberg 40, 89081 Ulm, Germany
| | - Daniela Warnecke
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstraße 14, 89081 Ulm, Germany
| | - Cristina Gentilini
- Orthox Ltd., 66 Innovation Drive, Milton Park, Abingdon, Oxfordshire OX14 4RQ UK
| | - Nick Skaer
- Orthox Ltd., 66 Innovation Drive, Milton Park, Abingdon, Oxfordshire OX14 4RQ UK
| | - Robert Walker
- Orthox Ltd., 66 Innovation Drive, Milton Park, Abingdon, Oxfordshire OX14 4RQ UK
| | - Oliver Kessler
- Centre of Orthopaedics and Sports, Albisriederstraße 243 A, 8047 Zurich, Switzerland
| | - Anita Ignatius
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstraße 14, 89081 Ulm, Germany
| | - Lutz Duerselen
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstraße 14, 89081 Ulm, Germany
| |
Collapse
|
12
|
Patel JM, Ghodbane SA, Brzezinski A, Gatt CJ, Dunn MG. Tissue-Engineered Total Meniscus Replacement With a Fiber-Reinforced Scaffold in a 2-Year Ovine Model. Am J Sports Med 2018; 46:1844-1856. [PMID: 29953287 DOI: 10.1177/0363546517752668] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
BACKGROUND Meniscus injuries and associated meniscectomies cause patients long-term pain and discomfort and can lead to joint deterioration. PURPOSE To evaluate a collagen-hyaluronan sponge reinforced with synthetic resorbable polymer fiber for total meniscus reconstruction in a long-term ovine model. STUDY DESIGN Controlled laboratory study. METHODS Eleven skeletally mature sheep were implanted with the total meniscus scaffold. At 2 years, explants were evaluated biologically (radial/circumferential histology, immunofluorescence) and mechanically (compression, tension), and articular surfaces were examined for damage. RESULTS The fiber-reinforced scaffold induced formation of functional neomeniscus tissue that was intact in 8 of 11 animals. The implant was remodeled into organized circumferentially aligned collagen bundles to resist meniscus hoop stresses. Moreover, type II collagen and proteoglycan deposition near the inner margin suggested a direct response to compressive stresses and confirmed fibrocartilage formation. Cartilage damage was observed, but end-stage (severe) joint deterioration associated with meniscectomy was avoided, even with limitations regarding the ovine surgical procedure and postoperative care. CONCLUSION A fiber-reinforced total meniscus replacement device induces formation of functional neomeniscus tissue that has the potential to prevent catastrophic joint deterioration associated with meniscectomy. CLINICAL RELEVANCE An off-the-shelf meniscus device that can be remodeled into functional tissue and thus prevent or delay the onset of osteoarthritis could address a widespread clinical need after meniscus injury.
Collapse
Affiliation(s)
- Jay M Patel
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA.,McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania, USA
| | - Salim A Ghodbane
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Andrzej Brzezinski
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA
| | - Charles J Gatt
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Michael G Dunn
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| |
Collapse
|
13
|
Patel JM, Brzezinski A, Raole DA, Dunn MG, Gatt CJ. Interference Screw Versus Suture Endobutton Fixation of a Fiber-Reinforced Meniscus Replacement Device in a Human Cadaveric Knee Model. Am J Sports Med 2018; 46:2133-2141. [PMID: 29847143 DOI: 10.1177/0363546518773737] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
BACKGROUND Meniscal lesions represent one of the most common intra-articular knee injuries. Meniscus replacement devices are needed to restore load distribution and knee stability after meniscectomy. Fixation of these devices is crucial to the generation of hoop stresses and the distribution of loads in the joint. PURPOSE To evaluate 2 different fixation techniques (suture endobutton and interference screw) for implantation of a novel meniscus device. STUDY DESIGN Controlled laboratory study. METHODS In 7 human cadaveric knees (aged 17-61 years), 1 anterior and 2 potential posterior tunnel locations were investigated, and both fixation techniques were tested in each tunnel. The native meniscus roots, devices fixed with a suture endobutton, and devices fixed with an interference screw were gripped with cryoclamps, and tibias were drilled and loaded into a custom jig. Samples were preloaded, preconditioned, loaded for 500 cycles (50-150 N), and tested in tension until failure. RESULTS For all 3 tunnels, suture fixation resulted in greater elongation (54.1%-150.7% greater; P < .05) during cyclic loading than interference screw fixation, which approximated the native roots. Both fixation techniques displayed ultimate tensile loads in the same range as native roots. However, stiffness of the suture fixation groups (36.5-41.6 N/mm) was only 28% to 37% of that of the interference screw fixation groups (98.7-131.6 N/mm), which had values approaching those of the native roots (anterior: 175.4 ± 24.2 N/mm; posterior: 157.6 ± 22.9 N/mm). CONCLUSION Interference screw fixation was found to be superior to suture fixation with regard to elongation and stiffness, a finding that should be considered in the design and implantation of novel meniscus replacement devices. CLINICAL RELEVANCE With the emergence of various devices for total meniscus replacement, the establishment of fixation strategies is crucial for the generation of tensile hoop stresses and the efficacy of these approaches.
Collapse
Affiliation(s)
- Jay M Patel
- Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, Rutgers Biomedical and Health Sciences, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers University, Piscataway, New Jersey, USA.,McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania, USA
| | - Andrzej Brzezinski
- Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, Rutgers Biomedical and Health Sciences, New Brunswick, New Jersey, USA
| | - Deep A Raole
- Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, Rutgers Biomedical and Health Sciences, New Brunswick, New Jersey, USA
| | - Michael G Dunn
- Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, Rutgers Biomedical and Health Sciences, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers University, Piscataway, New Jersey, USA
| | - Charles J Gatt
- Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, Rutgers Biomedical and Health Sciences, New Brunswick, New Jersey, USA.,Department of Biomedical Engineering, Rutgers University, Piscataway, New Jersey, USA
| |
Collapse
|
14
|
Warnecke D, Stein S, Haffner-Luntzer M, de Roy L, Skaer N, Walker R, Kessler O, Ignatius A, Dürselen L. Biomechanical, structural and biological characterisation of a new silk fibroin scaffold for meniscal repair. J Mech Behav Biomed Mater 2018; 86:314-324. [PMID: 30006280 PMCID: PMC6079190 DOI: 10.1016/j.jmbbm.2018.06.041] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2018] [Revised: 06/18/2018] [Accepted: 06/26/2018] [Indexed: 11/20/2022]
Abstract
Meniscal injury is typically treated surgically via partial meniscectomy, which has been shown to cause cartilage degeneration in the long-term. Consequently, research has focused on meniscal prevention and replacement. However, none of the materials or implants developed for meniscal replacement have yet achieved widespread acceptance or demonstrated conclusive chondroprotective efficacy. A redesigned silk fibroin scaffold, which already displayed promising results regarding biocompatibility and cartilage protection in a previous study, was characterised in terms of its biomechanical, structural and biological functionality to serve as a potential material for permanent partial meniscal replacement. Therefore, different quasi-static but also dynamic compression tests were performed. However, the determined compressive stiffness (0.56 ± 0.31 MPa and 0.30 ± 0.12 MPa in relaxation and creep configuration, respectively) was higher in comparison to the native meniscal tissue, which could potentially disturb permanent integration into the host tissue. Nevertheless, µ-CT analysis met the postulated requirements for partial meniscal replacement materials in terms of the microstructural parameters, like mean pore size (215.6 ± 10.9 µm) and total porosity (80.1 ± 4.3%). Additionally, the biocompatibility was reconfirmed during cell culture experiments. The current study provides comprehensive mechanical and biological data for the characterisation of this potential replacement material. Although some further optimisation of the silk fibroin scaffold may be advantageous, the silk fibroin scaffold showed sufficient biomechanical competence to support loads already in the early postoperative phase.
Collapse
Affiliation(s)
- Daniela Warnecke
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany.
| | - Svenja Stein
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany
| | - Melanie Haffner-Luntzer
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany
| | - Luisa de Roy
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany
| | | | | | - Oliver Kessler
- Centre of Orthopaedics and Sports, Zurich, Switzerland; University Medical Centre, Clinic for Orthopaedic Surgery, Magdeburg, Germany
| | - Anita Ignatius
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany
| | - Lutz Dürselen
- Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Helmholtzstr. 14, 89081 Ulm, Germany
| |
Collapse
|
15
|
Majd SE, Rizqy AI, Kaper HJ, Schmidt TA, Kuijer R, Sharma PK. An in vitro study of cartilage-meniscus tribology to understand the changes caused by a meniscus implant. Colloids Surf B Biointerfaces 2017; 155:294-303. [PMID: 28437755 DOI: 10.1016/j.colsurfb.2017.04.034] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/07/2016] [Revised: 04/12/2017] [Accepted: 04/13/2017] [Indexed: 10/19/2022]
Abstract
Active lifestyles increase the risk of meniscal injury. A permanent meniscus implant of polycarbonate urethane (PCU) is a promising treatment to postpone/prevent total knee arthroplasty. Study of the changes in articular cartilage tribology in the presence of PCU is essential in developing the optimum meniscus implant. Therefore, a cartilage-meniscus reciprocating, sliding model was developed in vitro, mimicking the stance and swing phases of the gait cycle. The meniscus was further replaced with PCU and surface-modified PCUs (with C18 chains, mono-functional polydimethylsiloxane groups and mono-functional polytetrafluoroethylene groups) to study the changes. The coefficient of friction (COF) was calculated, and cartilage wear was determined and quantified histologically. The cartilage-meniscus sliding resulted in low COF during both stance and swing (0.01< COF <0.12) and low wear of cartilage (scores <1). The cartilage-PCU sliding, during stance, revealed similar low COFs. But during swing, the COFs were high (average ∼1, maximum 1.6), indicating a breakdown in interstitial fluid pressurization lubrication and non-effective activation of the boundary lubrication. This may lead to wear of cartilage in long term. However, under the tested conditions the wear of cartilage against PCUs was not higher than its wear against meniscus, and the cartilage was occasionally damaged. The COF decreased with increasing the contact pressure (as-per a power equation) up to 1MPa. The changes in the surface modification of PCU did not affect PCU's tribological performance.
Collapse
Affiliation(s)
- Sara Ehsani Majd
- University of Groningen, University Medical Centre Groningen, Department of Biomedical Engineering, Antonius Deusinglaan 1, 9713AV Groningen, The Netherlands
| | - Aditya Iman Rizqy
- University of Groningen, University Medical Centre Groningen, Department of Biomedical Engineering, Antonius Deusinglaan 1, 9713AV Groningen, The Netherlands
| | - Hans J Kaper
- University of Groningen, University Medical Centre Groningen, Department of Biomedical Engineering, Antonius Deusinglaan 1, 9713AV Groningen, The Netherlands
| | - Tannin A Schmidt
- Faculty of Kinesiology, University of Calgary, Calgary, AB, Canada
| | - Roel Kuijer
- University of Groningen, University Medical Centre Groningen, Department of Biomedical Engineering, Antonius Deusinglaan 1, 9713AV Groningen, The Netherlands
| | - Prashant K Sharma
- University of Groningen, University Medical Centre Groningen, Department of Biomedical Engineering, Antonius Deusinglaan 1, 9713AV Groningen, The Netherlands.
| |
Collapse
|
16
|
Anisotropy in the viscoelastic response of knee meniscus cartilage. J Appl Biomater Funct Mater 2017; 15:e77-e83. [PMID: 27647392 DOI: 10.5301/jabfm.5000319] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 05/30/2016] [Indexed: 12/15/2022] Open
Abstract
BACKGROUND The knee meniscus is instrumental to stability, shock absorption, load transmission and stress distribution within the knee joint. Such functions are mechanically demanding, and replacement constructs used in meniscus repair often fail because of a poor match with the surrounding tissue. This study focused on the native structure-mechanics relationships and on their anisotropic behavior in meniscus, to define the target biomechanical viscoelastic properties required by scaffolds upon loading. METHODS To show regional orientation of the collagen fibers and their viscoelastic behavior, bovine lateral menisci were characterized by second harmonic generation microscopy and through time-dependent mechanical tests. Furthermore, their dynamic viscoelastic response was analyzed over a wide range of frequencies. RESULTS AND CONCLUSIONS Multilevel characterization aims to expand the biomimetic approach from the structure itself, to include the mechanical characteristics that give the meniscus its peculiar properties, thus providing tools for the design of novel, effective scaffolds. An example of modeling of anisotropic open-cell porous material tailored to fulfill the measured requirements is presented, leading to a definition of additional parameters for a better understanding of the load transmission mechanism and for better scaffold functionality.
Collapse
|
17
|
Sun J, Vijayavenkataraman S, Liu H. An Overview of Scaffold Design and Fabrication Technology for Engineered Knee Meniscus. MATERIALS (BASEL, SWITZERLAND) 2017; 10:E29. [PMID: 28772388 PMCID: PMC5344568 DOI: 10.3390/ma10010029] [Citation(s) in RCA: 51] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/29/2016] [Revised: 12/14/2016] [Accepted: 12/15/2016] [Indexed: 02/07/2023]
Abstract
Current surgical treatments for meniscal tears suffer from subsequent degeneration of knee joints, limited donor organs and inconsistent post-treatment results. Three clinical scaffolds (Menaflex CMI, Actifit® scaffold and NUsurface® Meniscus Implant) are available on the market, but additional data are needed to properly evaluate their safety and effectiveness. Thus, many scaffold-based research activities have been done to develop new materials, structures and fabrication technologies to mimic native meniscus for cell attachment and subsequent tissue development, and restore functionalities of injured meniscus for long-term effects. This study begins with a synopsis of relevant structural features of meniscus and goes on to describe the critical considerations. Promising advances made in the field of meniscal scaffolding technology, in terms of biocompatible materials, fabrication methods, structure design and their impact on mechanical and biological properties are discussed in detail. Among all the scaffolding technologies, additive manufacturing (AM) is very promising because of its ability to precisely control fiber diameter, orientation, and pore network micro-architecture to mimic the native meniscus microenvironment.
Collapse
Affiliation(s)
- Jie Sun
- Department of Industrial Design, Xi'an Jiaotong-Liverpool University, Suzhou 215123, China.
- National University of Singapore (Suzhou) Research Insititute, Suzhou 215123, China.
| | | | - Hang Liu
- National University of Singapore (Suzhou) Research Insititute, Suzhou 215123, China.
| |
Collapse
|
18
|
Patel JM, Merriam AR, Kohn J, Gatt CJ, Dunn MG. Negative Outcomes of Poly(l-Lactic Acid) Fiber-Reinforced Scaffolds in an Ovine Total Meniscus Replacement Model. Tissue Eng Part A 2016; 22:1116-25. [DOI: 10.1089/ten.tea.2016.0143] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023] Open
Affiliation(s)
- Jay M. Patel
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences–Robert Wood Johnson Medical School, New Brunswick, New Jersey
- Department of Biomedical Engineering, Rutgers–The State University of New Jersey, Piscataway, New Jersey
| | - Aaron R. Merriam
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences–Robert Wood Johnson Medical School, New Brunswick, New Jersey
- Department of Biomedical Engineering, Rutgers–The State University of New Jersey, Piscataway, New Jersey
| | - Joachim Kohn
- Department of Biomedical Engineering, Rutgers–The State University of New Jersey, Piscataway, New Jersey
- New Jersey Center for Biomaterials, Rutgers–The State University of New Jersey, Piscataway, New Jersey
| | - Charles J. Gatt
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences–Robert Wood Johnson Medical School, New Brunswick, New Jersey
- Department of Biomedical Engineering, Rutgers–The State University of New Jersey, Piscataway, New Jersey
| | - Michael G. Dunn
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences–Robert Wood Johnson Medical School, New Brunswick, New Jersey
- Department of Biomedical Engineering, Rutgers–The State University of New Jersey, Piscataway, New Jersey
| |
Collapse
|
19
|
Puetzer JL, Bonassar LJ. Physiologically Distributed Loading Patterns Drive the Formation of Zonally Organized Collagen Structures in Tissue-Engineered Meniscus. Tissue Eng Part A 2016; 22:907-16. [PMID: 27245484 DOI: 10.1089/ten.tea.2015.0519] [Citation(s) in RCA: 44] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023] Open
Abstract
The meniscus is a dense fibrocartilage tissue that withstands the complex loads of the knee via a unique organization of collagen fibers. Attempts to condition engineered menisci with compression or tensile loading alone have failed to reproduce complex structure on the microscale or anatomic scale. Here we show that axial loading of anatomically shaped tissue-engineered meniscus constructs produced spatial distributions of local strain similar to those seen in the meniscus when the knee is loaded at full extension. Such loading drove formation of tissue with large organized collagen fibers, levels of mechanical anisotropy, and compressive moduli that match native tissue. Loading accelerated the development of native-sized and aligned circumferential and radial collagen fibers. These loading patterns contained both tensile and compressive components that enhanced the major biochemical and functional properties of the meniscus, with loading significantly improved glycosaminoglycan (GAG) accumulation 200-250%, collagen accumulation 40-55%, equilibrium modulus 1000-1800%, and tensile moduli 500-1200% (radial and circumferential). Furthermore, this study demonstrates local changes in mechanical environment drive heterogeneous tissue development and organization within individual constructs, highlighting the importance of recapitulating native loading environments. Loaded menisci developed cartilage-like tissue with rounded cells, a dense collagen matrix, and increased GAG accumulation in the more compressively loaded horns, and fibrous collagen-rich tissue in the more tensile loaded outer 2/3, similar to native menisci. Loaded constructs reached a level of organization not seen in any previous engineered menisci and demonstrate great promise as meniscal replacements.
Collapse
Affiliation(s)
- Jennifer L Puetzer
- 1 Meinig School of Biomedical Engineering, Cornell University , Ithaca, New York.,2 Departments of Materials and Bioengineering, Imperial College London, London, United Kingdom
| | - Lawrence J Bonassar
- 1 Meinig School of Biomedical Engineering, Cornell University , Ithaca, New York.,3 Sibley School of Mechanical and Aerospace Engineering, Cornell University , Ithaca, New York
| |
Collapse
|
20
|
Patel JM, Merriam AR, Culp BM, Gatt CJ, Dunn MG. One-Year Outcomes of Total Meniscus Reconstruction Using a Novel Fiber-Reinforced Scaffold in an Ovine Model. Am J Sports Med 2016; 44:898-907. [PMID: 26842311 DOI: 10.1177/0363546515624913] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
BACKGROUND Meniscus injuries and resulting meniscectomies lead to joint deterioration, causing pain, discomfort, and instability. Tissue-engineered devices to replace the meniscus have not shown consistent success with regard to function, mechanical integrity, or protection of cartilage. PURPOSE To evaluate a novel resorbable polymer fiber-reinforced meniscus reconstruction scaffold in an ovine model for 52 weeks and assess its integrity, tensile and compressive mechanics, cell phenotypes, matrix organization and content, and protection of the articular cartilage surfaces. STUDY DESIGN Controlled laboratory study. METHODS Eight skeletally mature ewes were implanted with the fiber-reinforced scaffold after total meniscectomy, and 2 additional animals had untreated total meniscectomies. Animals were sacrificed at 52 weeks, and the explants and articular surfaces were analyzed macroscopically. Explants were characterized by ultimate tensile testing, confined compression creep testing, and biochemical, histological, and immunohistochemical analyses. Cartilage damage was characterized using the Mankin score on histologic slides from both the femur and tibia. RESULTS One sheep was removed from the study because of a torn extensor tendon; the remaining 7 explants remained fully intact and incorporated into the bone tunnels. All explants exhibited functional tensile loads, tensile stiffnesses, and compressive moduli. Fibrocartilagenous repair with both types 1 and 2 collagen were observed, with areas of matrix organization and biochemical content similar to native tissue. Narrowing in the body region was observed in 5 of 7 explants. Mankin scores showed less cartilage damage in the explant group (femoral condyle: 3.43 ± 0.79, tibial plateau: 3.50 ± 1.63) than in the meniscectomy group (femoral condyle: 8.50 ± 3.54, tibial plateau: 6.75 ± 2.47) and were comparable with Mankin scores at the previously reported 16- and 32-week time points. CONCLUSION A resorbable fiber-reinforced meniscus scaffold supports formation of functional neomeniscus tissue, with the potential to prevent joint degeneration that typically occurs after total meniscectomy. Further studies with improvements to the initial mechanics of the scaffold and testing for longer time periods are warranted. CLINICAL RELEVANCE Meniscectomy is an extremely common orthopaedic procedure, and few options currently exist for the treatment of significant loss of meniscus tissue. Successful development of a tissue-engineered meniscus scaffold could substantially reduce the incidence of postmeniscectomy joint degeneration and the subsequent procedures used for its treatment.
Collapse
Affiliation(s)
- Jay M Patel
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Aaron R Merriam
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Brian M Culp
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA
| | - Charles J Gatt
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Michael G Dunn
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| |
Collapse
|
21
|
Merriam AR, Patel JM, Culp BM, Gatt CJ, Dunn MG. Successful Total Meniscus Reconstruction Using a Novel Fiber-Reinforced Scaffold: A 16- and 32-Week Study in an Ovine Model. Am J Sports Med 2015; 43:2528-37. [PMID: 26297520 DOI: 10.1177/0363546515595065] [Citation(s) in RCA: 41] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
BACKGROUND Meniscus injuries in the United States result in an estimated 850,000 surgical procedures each year. Although meniscectomies are the most commonly performed orthopaedic surgery, little advancement has been made in meniscus replacement and regeneration, and there is currently no total meniscus replacement device approved by the Food and Drug Administration. HYPOTHESIS A novel fiber-reinforced meniscus scaffold can be used as a functional total meniscus replacement. STUDY DESIGN Controlled laboratory study. METHODS A tyrosine-derived, polymer fiber-reinforced collagen sponge meniscus scaffold was evaluated mechanically (tensile and compressive testing) and histologically after 16 and 32 weeks of implantation in an ovine total meniscectomy model (N = 20; 16 implants plus 4 meniscectomies, divided equally over the 2 time periods). The extent of cartilage damage was also measured on tibial plateaus by use of toluidine blue surface staining and on femoral condyles by use of Mankin scores on histological slides. RESULTS Scaffolds induced formation of neomeniscus tissue that remained intact and functional, with breaking loads approximating 250 N at both 16 and 32 weeks compared with 552 N for native menisci. Tensile stiffness values (99 and 74 N/mm at 16 and 32 weeks, respectively) were also comparable with those of the native meniscus (147 N/mm). The compressive modulus of the neomeniscus tissue (0.33 MPa at both 16 and 32 weeks) was significantly increased compared with unimplanted (time 0) scaffolds (0.15 MPa). There was histological evidence of extensive tissue ingrowth and extracellular matrix deposition, with immunohistochemical evidence of types I and II collagen. Based on significantly decreased surface damage scores as well as Mankin scores, the scaffold implants provided greater protection of articular cartilage compared with the untreated total meniscectomy. CONCLUSION This novel fiber-reinforced meniscus scaffold can act as a functional meniscus replacement, with mechanical properties similar to those of the native meniscus, while protecting the articular cartilage of the knee from the extensive damage after a total meniscectomy. CLINICAL RELEVANCE This meniscus replacement scaffold has the potential to improve surgical treatment and provide better long-term outcomes for those suffering from severe meniscus damage.
Collapse
Affiliation(s)
- Aaron R Merriam
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Jay M Patel
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Brian M Culp
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA
| | - Charles J Gatt
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| | - Michael G Dunn
- Department of Orthopaedic Surgery, Rutgers Biomedical and Health Sciences-Robert Wood Johnson Medical School, New Brunswick, New Jersey, USA Department of Biomedical Engineering, Rutgers-The State University of New Jersey, Piscataway, New Jersey, USA
| |
Collapse
|
22
|
Induction of fiber alignment and mechanical anisotropy in tissue engineered menisci with mechanical anchoring. J Biomech 2015; 48:1436-43. [DOI: 10.1016/j.jbiomech.2015.02.033] [Citation(s) in RCA: 49] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2015] [Accepted: 02/15/2015] [Indexed: 11/21/2022]
|
23
|
Moran CJ, Busilacchi A, Lee CA, Athanasiou KA, Verdonk PC. Biological augmentation and tissue engineering approaches in meniscus surgery. Arthroscopy 2015; 31:944-55. [PMID: 25687715 DOI: 10.1016/j.arthro.2014.11.044] [Citation(s) in RCA: 64] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/18/2014] [Revised: 11/19/2014] [Accepted: 11/19/2014] [Indexed: 02/02/2023]
Abstract
PURPOSE The purpose of this review was to evaluate the role of biological augmentation and tissue engineering strategies in meniscus surgery. Although clinical (human), preclinical (animal), and in vitro tissue engineering studies are included here, we have placed additional focus on addressing preclinical and clinical studies reported during the 5-year period used in this review in a systematic fashion while also providing a summary review of some important in vitro tissue engineering findings in the field over the past decade. METHODS A search was performed on PubMed for original works published from 2009 to March 31, 2014 using the term "meniscus" with all the following terms: "scaffolds," "constructs," "cells," "growth factors," "implant," "tissue engineering," and "regenerative medicine." Inclusion criteria were the following: English-language articles and original clinical, preclinical (in vivo), and in vitro studies of tissue engineering and regenerative medicine application in knee meniscus lesions published from 2009 to March 31, 2014. RESULTS Three clinical studies and 18 preclinical studies were identified along with 68 tissue engineering in vitro studies. These reports show the increasing promise of biological augmentation and tissue engineering strategies in meniscus surgery. The role of stem cell and growth factor therapy appears to be particularly useful. A review of in vitro tissue engineering studies found a large number of scaffold types to be of promise for meniscus replacement. Limitations include a relatively low number of clinical or preclinical in vivo studies, in addition to the fact there is as yet no report in the literature of a tissue-engineered meniscus construct used clinically. Neither does the literature provide clarity on the optimal meniscus scaffold type or biological augmentation with which meniscus repair or replacement would be best addressed in the future. There is increasing focus on the role of mechanobiology and biomechanical and biochemical cues in this process, however, and it is hoped that this may lead to improvements in this strategy. CONCLUSIONS There appears to be significant potential for biological augmentation and tissue engineering strategies in meniscus surgery to enhance options for repair and replacement. However, there are still relatively few clinical studies being reported in this regard. There is a strong need for improved translational activities and infrastructure to link the large amounts of in vitro and preclinical biological and tissue engineering data to clinical application. LEVEL OF EVIDENCE Level IV, systematic review of Level I-IV studies.
Collapse
Affiliation(s)
- Cathal J Moran
- Sports Surgery Clinic and Trinity College Dublin, Dublin, Ireland.
| | - Alberto Busilacchi
- Clinical Orthopaedics, Università Politecnica delle Marche, Ancona, Italy
| | - Cassandra A Lee
- Departments of Orthopaedic Surgery & Biomedical Engineering, University of California, Davis, California, U.S.A
| | - Kyriacos A Athanasiou
- Departments of Orthopaedic Surgery & Biomedical Engineering, University of California, Davis, California, U.S.A
| | | |
Collapse
|
24
|
Engineering meniscus structure and function via multi-layered mesenchymal stem cell-seeded nanofibrous scaffolds. J Biomech 2015; 48:1412-9. [PMID: 25817333 DOI: 10.1016/j.jbiomech.2015.02.036] [Citation(s) in RCA: 47] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2015] [Accepted: 02/15/2015] [Indexed: 11/22/2022]
Abstract
Despite advances in tissue engineering for the knee meniscus, it remains a challenge to match the complex macroscopic and microscopic structural features of native tissue, including the circumferentially and radially aligned collagen bundles essential for mechanical function. To mimic this structural hierarchy, this study developed multi-lamellar mesenchymal stem cell (MSC)-seeded nanofibrous constructs. Bovine MSCs were seeded onto nanofibrous scaffolds comprised of poly(ε-caprolactone) with fibers aligned in a single direction (0° or 90° to the scaffold long axis) or circumferentially aligned (C). Multi-layer groups (0°/0°/0°, 90°/90°/90°, 0°/90°/0°, 90°/0°/90°, and C/C/C) were created and cultured for a total of 6 weeks under conditions favoring fibrocartilaginous tissue formation. Tensile testing showed that 0° and C single layer constructs had stiffness values several fold higher than 90° constructs. For multi-layer groups, the stiffness of 0°/0°/0° constructs was higher than all other groups, while 90°/90°/90° constructs had the lowest values. Data for collagen content showed a general positive interactive effect for multi-layers relative to single layer constructs, while a positive interaction for stiffness was found only for the C/C/C group. Collagen content and cell infiltration occurred independent of scaffold alignment, and newly formed collagenous matrix followed the scaffold fiber direction. Structural hierarchies within multi-lamellar constructs dictated biomechanical properties, and only the C/C/C constructs with non-orthogonal alignment within layers featured positive mechanical reinforcement as a consequence of the layered construction. These multi-layer constructs may serve as functional substitutes for the meniscus as well as test beds to understand the complex mechanical principles that enable meniscus function.
Collapse
|
25
|
Sayin E, Baran ET, Hasirci V. Protein-based materials in load-bearing tissue-engineering applications. Regen Med 2014; 9:687-701. [DOI: 10.2217/rme.14.52] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Proteins such as collagen and elastin are robust molecules that constitute nanocomponents in the hierarchically organized ultrastructures of bone and tendon as well as in some of the soft tissues that have load-bearing functions. In the present paper, the macromolecular structure and function of the proteins are reviewed and the potential of mammalian and non-mammalian proteins in the engineering of load-bearing tissue substitutes are discussed. Chimeric proteins have become an important structural biomaterial source and their potential in tissue engineering is highlighted. Processing of proteins challenge investigators and in this review rapid prototyping and microfabrication are proposed as methods for obtaining precisely defined custom-built tissue engineered structures with intrinsic microarchitecture.
Collapse
Affiliation(s)
- Esen Sayin
- METU, Department of Biotechnology, Ankara, Turkey
- BIOMATEN, METU Center of Excellence in Biomaterials & Tissue Engineering, Ankara 06800, Turkey
| | - Erkan Türker Baran
- BIOMATEN, METU Center of Excellence in Biomaterials & Tissue Engineering, Ankara 06800, Turkey
| | - Vasif Hasirci
- METU, Department of Biotechnology, Ankara, Turkey
- BIOMATEN, METU Center of Excellence in Biomaterials & Tissue Engineering, Ankara 06800, Turkey
- METU, Departments of Biological Sciences, Ankara, Turkey
| |
Collapse
|
26
|
Vrancken ACT, Crijns SPM, Ploegmakers MJM, O'Kane C, van Tienen TG, Janssen D, Buma P, Verdonschot N. 3D geometry analysis of the medial meniscus--a statistical shape modeling approach. J Anat 2014; 225:395-402. [PMID: 25052030 DOI: 10.1111/joa.12223] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 07/04/2014] [Indexed: 11/28/2022] Open
Abstract
The geometry-dependent functioning of the meniscus indicates that detailed knowledge on 3D meniscus geometry and its inter-subject variation is essential to design well functioning anatomically shaped meniscus replacements. Therefore, the aim of this study was to quantify 3D meniscus geometry and to determine whether variation in medial meniscus geometry is size- or shape-driven. Also we performed a cluster analysis to identify distinct morphological groups of medial menisci and assessed whether meniscal geometry is gender-dependent. A statistical shape model was created, containing the meniscus geometries of 35 subjects (20 females, 15 males) that were obtained from MR images. A principal component analysis was performed to determine the most important modes of geometry variation and the characteristic changes per principal component were evaluated. Each meniscus from the original dataset was then reconstructed as a linear combination of principal components. This allowed the comparison of male and female menisci, and a cluster analysis to determine distinct morphological meniscus groups. Of the variation in medial meniscus geometry, 53.8% was found to be due to primarily size-related differences and 29.6% due to shape differences. Shape changes were most prominent in the cross-sectional plane, rather than in the transverse plane. Significant differences between male and female menisci were only found for principal component 1, which predominantly reflected size differences. The cluster analysis resulted in four clusters, yet these clusters represented two statistically different meniscal shapes, as differences between cluster 1, 2 and 4 were only present for principal component 1. This study illustrates that differences in meniscal geometry cannot be explained by scaling only, but that different meniscal shapes can be distinguished. Functional analysis, e.g. through finite element modeling, is required to assess whether these distinct shapes actually influence the biomechanical performance of the meniscus.
Collapse
Affiliation(s)
- A C T Vrancken
- Orthopaedic Research Lab, Radboud University Medical Center, Nijmegen, The Netherlands
| | | | | | | | | | | | | | | |
Collapse
|
27
|
Bonnevie ED, Puetzer JL, Bonassar LJ. Enhanced boundary lubrication properties of engineered menisci by lubricin localization with insulin-like growth factor I treatment. J Biomech 2014; 47:2183-8. [DOI: 10.1016/j.jbiomech.2013.10.028] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2013] [Revised: 10/11/2013] [Accepted: 10/12/2013] [Indexed: 10/26/2022]
|
28
|
Abstract
Over the past 2 decades there has been a profound shift in our perception of the role of the meniscus in the knee joint. Orthopaedic opinion now favors salvaging and restoring the damaged meniscus where possible. Basic science is characterizing its form (anatomy) and functionality (biological and biomechanical) in an attempt to understand the effect of meniscal injury and repair on the knee joint as a whole. The meniscus is a complex tissue and has warranted extensive basic science, translational, and clinical research to identify techniques to augment healing and even replace the meniscus. The application of quantitative magnetic resonance image sequencing to the meniscus and articular cartilage of the affected compartment promises to add a quantifiable outcome measure to the body of clinical evidence that supports restoration of the meniscus. This article discusses the recent advances and outcomes in the pursuit of meniscal restoration with particular focus on the use of augmentation strategies in meniscal repair, meniscal imaging, and translational strategies.
Collapse
Affiliation(s)
- Ian D Hutchinson
- Ian Hutchinson, Laboratory for Tissue Engineering Regeneration & Repair, Hospital for Special Surgery, 535 East 70th Street, New York, NY 10021. (
| | | | | | | | | |
Collapse
|
29
|
Rongen JJ, van Tienen TG, van Bochove B, Grijpma DW, Buma P. Biomaterials in search of a meniscus substitute. Biomaterials 2014; 35:3527-40. [DOI: 10.1016/j.biomaterials.2014.01.017] [Citation(s) in RCA: 79] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2013] [Accepted: 01/08/2014] [Indexed: 11/24/2022]
|
30
|
Higashioka MM, Chen JA, Hu JC, Athanasiou KA. Building an anisotropic meniscus with zonal variations. Tissue Eng Part A 2013; 20:294-302. [PMID: 23931258 DOI: 10.1089/ten.tea.2013.0098] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Abstract
Toward addressing the difficult problems of knee meniscus regeneration, a self-assembling process has been used to re-create the native morphology and matrix properties. A significant problem in such attempts is the recapitulation of the distinct zones of the meniscus, the inner, more cartilaginous and the outer, more fibrocartilaginous zones. In this study, an anisotropic and zonally variant meniscus was produced by self-assembly of the inner meniscus (100% chondrocytes) followed by cell seeding the outer meniscus (coculture of chondrocytes and meniscus cells). After 4 weeks in culture, the engineered, inner meniscus exhibited a 42% increase in both instantaneous and relaxation moduli and a 62% increase in GAG/DW, as compared to the outer meniscus. In contrast, the circumferential tensile modulus and collagen/DW of the outer zone was 101% and 129% higher, respectively, than the values measured for the inner zone. Furthermore, there was no difference in the radial tensile modulus between the control and zonal engineered menisci, suggesting that the inner and outer zones of the engineered zonal menisci successfully integrated. These data demonstrate that not only can biomechanical and biochemical properties be engineered to differ by the zone, but they can also recapitulate the anisotropic behavior of the knee meniscus.
Collapse
Affiliation(s)
- Michael M Higashioka
- 1 Department of Biomedical Engineering, University of California Davis , Davis, California
| | | | | | | |
Collapse
|
31
|
Hasan J, Fisher J, Ingham E. Current strategies in meniscal regeneration. J Biomed Mater Res B Appl Biomater 2013; 102:619-34. [PMID: 24030973 DOI: 10.1002/jbm.b.33030] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2013] [Revised: 07/13/2013] [Accepted: 08/18/2013] [Indexed: 12/26/2022]
Abstract
The meniscus plays an important role in the biomechanics and tribology of the knee joint. Damage to or disease of the meniscus is now recognized to predispose to the development of osteoarthritis. Treatment of meniscal injury through arthroscopic surgery has become one of the most common orthopedic surgical procedures, and in the United States this can represent 10 to 20% of procedures related to the knee. The meniscus has a limited healing capacity constrained to the vascularized periphery and therefore, surgical repair of the avascular regions is not always feasible. Replacement and repair of the meniscus to treat injuries is being investigated using tissue engineering strategies. Promising as these approaches may be, there are, however, major barriers to overcome before translation to the clinic.
Collapse
Affiliation(s)
- Jahid Hasan
- Institute of Medical and Biological Engineering, Schools of Biomedical Sciences and Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, UK
| | | | | |
Collapse
|
32
|
Puetzer JL, Bonassar LJ. High density type I collagen gels for tissue engineering of whole menisci. Acta Biomater 2013; 9:7787-95. [PMID: 23669622 DOI: 10.1016/j.actbio.2013.05.002] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2012] [Revised: 04/25/2013] [Accepted: 05/01/2013] [Indexed: 02/07/2023]
Abstract
This study investigates the potential of high density type I collagen gels as an injectable scaffold for tissue engineering of whole menisci, and compares these results with previous strategies using alginate as an injectable scaffold. Bovine meniscal fibrochondrocytes were mixed with collagen and injected into micro-computed tomography-based molds to create 10 and 20mgml(-1) menisci that were cultured for up to 4weeks and compared with cultured alginate menisci. Contraction, histological, confocal microscopy, biochemical and mechanical analysis were performed to determine tissue development. After 4weeks culture, collagen menisci had preserved their shape and significantly improved their biochemical and mechanical properties. Both 10 and 20mgml(-1) menisci maintained their DNA content while significantly improving the glycosaminoglycan and collagen content, at values significantly higher than the alginate controls. Collagen menisci matched the alginate control in terms of the equilibrium modulus, and developed a 3- to 6-fold higher tensile modulus than alginate by 4weeks. Further fibrochondrocytes were able to reorganize the collagen gels into a more fibrous appearance similar to native menisci.
Collapse
Affiliation(s)
- Jennifer L Puetzer
- Department of Biomedical Engineering, Cornell University, Ithaca, NY 14853, USA
| | | |
Collapse
|
33
|
Puetzer JL, Brown BN, Ballyns JJ, Bonassar LJ. The effect of IGF-I on anatomically shaped tissue-engineered menisci. Tissue Eng Part A 2013; 19:1443-50. [PMID: 23360441 DOI: 10.1089/ten.tea.2012.0645] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
This study investigates the effect of insulin-like growth factor (IGF)-I on the development of anatomically-shaped alginate menisci seeded with meniscal fibrochondrocytes. To accomplish this, bovine meniscal fibrochondrocytes were seeded into 2% w/v alginate, crosslinked with calcium sulfate, and injected into anatomical molds derived from microcomputed tomography scans. The meniscal constructs were then cultured for up to 4 weeks with or without 100 ng/mL IGF-I supplemented in the media. Histological, immunohistological, biochemical, and mechanical analyses were performed to characterize tissue development, accumulation and localization of extracellular matrix, and mechanical properties. After 4 weeks of culture, IGF-I treatment significantly improved mechanical and biochemical properties, while maintaining DNA content, with a 26-fold increase in glycosaminoglycan (GAG) content and 10-fold increase in collagen content compared to 0-week controls, and a 3-fold increase in the equilibrium modulus at 2 weeks compared to controls. IGF-I-treated menisci had ∼60% of the GAG content of native tissue and the compressive equilibrium modulus matched native properties by 2 weeks of culture. Further, IGF-I-treated menisci developed a distinct surface layer similar to native tissue with elongated cells and collagen fibers aligned parallel to the surface, the presence of types I and II collagen, and accumulation of lubricin. This study demonstrates that IGF-I treatment can greatly increase the mechanical and biochemical properties of engineered tissues and aid in the development of a distinct surface zone similar to the superficial zone of native menisci.
Collapse
Affiliation(s)
- Jennifer L Puetzer
- Department of Biomedical Engineering, Cornell University, Ithaca, New York 14853, USA
| | | | | | | |
Collapse
|
34
|
Fisher MB, Henning EA, Söegaard N, Esterhai JL, Mauck RL. Organized nanofibrous scaffolds that mimic the macroscopic and microscopic architecture of the knee meniscus. Acta Biomater 2013; 9:4496-504. [PMID: 23085562 PMCID: PMC3508287 DOI: 10.1016/j.actbio.2012.10.018] [Citation(s) in RCA: 56] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2012] [Revised: 10/10/2012] [Accepted: 10/11/2012] [Indexed: 10/27/2022]
Abstract
The menisci are crescent-shaped fibrocartilaginous tissues whose structural organization consists of dense collagen bundles that are locally aligned but show a continuous change in macroscopic directionality. This circumferential patterning is necessary for load transmission across the knee joint and is a key design parameter for tissue engineered constructs. To address this issue we developed a novel electrospinning method to produce scaffolds composed of circumferentially aligned (CircAl) nanofibers, quantified their structure and mechanics, and compared them with traditional linearly aligned (LinAl) scaffolds. Fibers were locally oriented in CircAl scaffolds, but their orientation varied considerably as a function of position (P<0.05). LinAl fibers did not change in orientation over a similar length scale (P>0.05). Cell seeding of CircAl scaffolds resulted in a similar cellular directionality. Mechanical analysis of CircAl scaffolds revealed significant interactions between scaffold length and region (P<0.05), with the tensile modulus near the edge of the scaffolds decreasing with increasing scaffold length. No such differences were detected in LinAl specimens (P>0.05). Simulation of the fiber deposition process produced "theoretical" fiber populations that matched the fiber organization and mechanical properties observed experimentally. These novel scaffolds, with spatially varying local orientations and mechanics, will enable the formation of functional anatomic meniscus constructs.
Collapse
Affiliation(s)
- Matthew B. Fisher
- McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
- Philadelphia Veterans Administration Medical Center, Philadelphia, PA 19104, USA
| | - Elizabeth A. Henning
- McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
- Philadelphia Veterans Administration Medical Center, Philadelphia, PA 19104, USA
| | - Nicole Söegaard
- McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - John L. Esterhai
- McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
- Philadelphia Veterans Administration Medical Center, Philadelphia, PA 19104, USA
| | - Robert L. Mauck
- McKay Orthopaedic Research Laboratory, Department of Orthopaedic Surgery, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
- Philadelphia Veterans Administration Medical Center, Philadelphia, PA 19104, USA
| |
Collapse
|
35
|
Vrancken ACT, Buma P, van Tienen TG. Synthetic meniscus replacement: a review. INTERNATIONAL ORTHOPAEDICS 2012; 37:291-9. [PMID: 23100123 DOI: 10.1007/s00264-012-1682-7] [Citation(s) in RCA: 62] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2012] [Accepted: 10/03/2012] [Indexed: 10/27/2022]
Abstract
The number of meniscus-related operations continues to rise due to the ageing and more active population. Irreparable meniscal lesions generally require (partial) meniscectomy. Although a majority of the patients benefit from pain relief and functional improvement post-meniscectomy, some remain symptomatic. As an alternative to a meniscal allograft, which is only indicated for the severely damaged meniscus, most patients can nowadays be treated by implantation of a synthetic meniscal substitute. Currently three of these implants, two partial and one total replacement, are clinically available and several others are in the stage of preclinical testing. Grossly, two types of meniscal substitutes can be distinguished: porous, resorbable implants that stimulate tissue regeneration and solid, non-resorbable implants that permanently replace the whole meniscus. Although the implantation of a porous meniscus replacement generally seems promising and improves clinical outcome measures to some degree, their superiority to partial meniscectomy still needs to be proven. The evaluation of new prostheses being developed requires a wider focus than has been adopted so far. Upon selection of the appropriate materials, preclinical evaluation of such implants should comprise a combination of (in vitro) biomechanical and (in vivo) biological tests, while up to now the focus has mainly been on biological aspects. Obviously, well-defined randomised controlled trials are necessary to support clinical performance of new implants. Since the use of a meniscus replacement requires an additional costly implant and surgery compared to meniscectomy only, the clinical outcome of new products should be proven to surpass the results of the conventional therapies available.
Collapse
Affiliation(s)
- Anne Christiane Theodora Vrancken
- Orthopaedic Research Lab, Radboud University Nijmegen Medical Centre, Huispost 357, PO Box 9101, 6500 HB, Nijmegen, The Netherlands.
| | | | | |
Collapse
|