HAp@GO drug delivery vehicle with dual-stimuli-triggered drug release property and efficient synergistic therapy function against cancer

Preparation and characterization of mesoporous HA coating with paclitaxel loaded lignin nanospheres on titanium surface

Background

Primary malignant bone tumor is a disease that can lead to death. The usually applied clinical treatment strategy is surgical resection of the primary tumor. However, tumor cells are difficult to clean up, easy to make the tumor recurrence, and the bone defect caused by surgical resection also hindered the postoperative recovery.

Materials and methods

Herein, in this work, mesoporous hydroxyapatite (HA) coating with petal-structure was prepared on titanium (Ti) implant surfaces by micro-arc oxidation (MAO) to accelerate the bone growth, and then paclitaxel (PTX) loaded lignin nanospheres were deposited into the HA coatings to get a sustained release for killing residual tumor cells.

Results

The results showed that many gaps and holes of micro-scale were formed in the petal-structured HA coatings, they worked as traps for the PTX loaded nanospheres to enhance the deposited amount and immobilization stability, playing good role of drug loading platform. The encapsulation of PTX by lignin ensured a lower release rate and a higher sustaining release time when compared with the PTX without encapsulation. In addition, the HA coating with PTX loaded lignin nanospheres showed higher killing effect to tumor cells than to osteoblast.

Conclusion

The mesoporous HA coating with paclitaxel loaded lignin nanospheres endowed the titanium surface with good biological property and tumor cell-killing effect, so the obtained Ti-based material had a highly hopeful application as the localized implant for therapy of primary malignant bone tumor.

5-Fluorouracil adsorption on graphene oxide-amine modified graphene oxide/hydroxyapatite composite for drug delivery applications: Optimization and release kinetics studies

The present study focused on investigation of graphene oxide/hydroxyapatite (GO/HAp) and amine modified graphene oxide/hydroxyapatite (GO-NH2/HAp) composites as potential drug carrier agents for 5-Fluorouracil (5-FU). Incorporation of 5-Fluorouracil drug was performed via adsorption through π-π interactions and electrostatic attractions. Modification of graphene oxide was performed for the production of amine modified graphene oxide/hydroxyapatite composite with the intention of enhancing adsorption performance. The X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA) and zeta potential/particle size analysis were performed for particle characterization while Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analysis were used to analyze detailed morphological properties. Experimental design studies were followed out in order to determine the effect of adsorption parameters including graphene oxide amount, pH and initial drug concentration on 5-Fluorouracil adsorption behavior. Adsorption isotherms of both composites with unmodified and modified GO were best fitted to Freundlich model with R2 values of 0.9616 and 0.9682 respectively. The maximum adsorption capacities (qm) were calculated as 47.3 mg/g and 18.4 for graphene oxide/hydroxyapatite and amine modified graphene oxide/hydroxyapatite composites respectively at pH 2.0. The highest adsorption percentage was obtained for amine modified graphene oxide/hydroxyapatite composite as 40.87 % at pH 2.0 condition. In vitro release kinetic studies revealed that compliance with Higuchi and Korsmeyer-Peppas kinetic models were observed for graphene oxide/hydroxyapatite, whereas zero order and Korsmeyer-Peppas kinetic models pointed out as the well-fitted model for amine modified graphene oxide/hydroxyapatite composite. The release period of 5-FU drug from all composites were continued up to 8-10 h in physiological conditions (pH 7.4, 37 °C) indicating an achieved controlled release. Based on the overall findings, graphene oxide/hydroxyapatite and amine modified graphene oxide/hydroxyapatite composites could be suggested as a potential drug delivery agent for 5-FU in clinical applications.

Preparation and Properties of GO/ZnO/nHAp Composite Microsphere Bone Regeneration Material

The purpose of this study is to explore the possibility of using graphene-zinc oxide-hydroxyapatite (GO/ZnO/nHAp) composite microspheres as bone regeneration materials by making use of the complementary advantages of nanocomposites, so as to provide reference for the clinical application of preventing and solving bacterial infection after implantation of synthetic materials. Firstly, GO/ZnO composites and hydroxyapatite nanoparticles were synthesized using the hydrothermal method, and then GO/ZnO/nHAp composite microspheres were prepared via high-temperature sintering. The graphene-zinc oxide-calcium phosphate composite microspheres were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), energy dispersion spectroscopy (EDS), water contact angle measurement, degradation and pH determination, and differential thermal analysis (DiamondTG/DTA). The biocompatibility, osteogenic activity, and antibacterial activity of GO/ZnO/nHAp composite microspheres were further studied. The results of the cell experiment and antibacterial experiment showed that 0.5% and 1% GO-ZnO-nHAp composite microspheres not only had good biocompatibility and osteogenic ability but also inhibited Escherichia coli and Staphylococcus aureus by more than 45% and 70%. Therefore, GO/ZnO/nHAp composite microspheres have good physical and chemical properties and show good osteogenic induction and antibacterial activity, and this material has the possibility of being used as a bone regeneration material.

Hydroxyapatite microspheres used as a drug delivery system for gliosarcoma strain 9l/Lacz treatment by photodynamic therapy protocols

BACKGROUND

Hydroxyapatite (HAp) presents similarities with the human bone structure and presents properties such as biodegradability, biocompatibility, and osteoconductivity, which favors its use in prostheses implants and enables its use as a vehicle for the delivery of photosensitizers (PS) from systems of release (DDS) for photodynamic therapy applications Methods: In this work was to synthesized hydroxyapatite microspheres (meHAp), encapsulated with chloroaluminium phthalocyanine (ClAlPc), for DDS. meHAp was synthesized using vaterite as a template. The drug was encapsulated by mixing meHAp and a 50.0 mg.mL-1 ClAlPc solution. Photochemical, photophysical, and photobiological studies characterized the system.

RESULTS

The images from the SEM analysis showed the spherical form of the particles. All spectroscopic results showed excellent photophysical parameters of the drug studied when served in the meHAp system. The incorporation efficiency was 57.8 %. The trypan blue exclusion test results showed a significant reduction (p < 0.05) in cell viability for the groups treated with PDT at all concentrations above 250 μg.mL-1. In 9 L/lacZ gliosarcoma cells, PDT mediated at concentrations from 250 to 62.5 µg.mL-1 reduced cell viability by more than 98 %. In the cell internalization study, it was possible to observe the internalization of phthalocyanines at 37 °C, with the accumulation of PS in the cytoplasm and inside the nucleus in the two tested concentrations.

CONCLUSIONS

From all the results presented throughout the article, the meHAp system shows promise for use as a modified release system (DSD) in photodynamic therapy.

Recent advances on hyperthermia therapy applications of carbon-based nanocomposites

Generally, hyperthermia is referred to the composites capability to increase local temperature in such a way that the generated heat would lead to cancerous or bacteria cells destruction, with minimum damage to normal tissue cells. Many different materials have been utilized for hyperthermia application via different heat generating methods. Carbon-based nanomaterials consisting of graphene oxide (GO), carbon nanotube (CNT), carbon dot (CD) and carbon quantum dot (CQD), nanodiamond (ND), fullerene and carbon fiber (CF), have been studied significantly for different applications including hyperthermia due to their biocompatibility, biodegradability, chemical and physical stability, thermal and electrical conductivity and in some cases photothermal conversion. Therefore, in this comprehensive review, a structure-based view on carbon nanomaterials application in hyperthermia therapy of cancer and bacteria via various methods such as optical, magnetic, ultrasonic and radiofrequency-induced hyperthermia is presented.

Review article laser-induced hyperthermia on graphene oxide composites

BACKGROUND

Hyperthermia-based therapies have shown great potential for clinical applications such as for the antitumor and antipathogenic activities. Within all strategies, the so-called photothermal therapy proposes to induce the hyperthermia by the remote laser radiation on a photothermal conversion agent, in contact with the target tissue.

METHODS

This paper reviews the most relevant in vitro and in vivo studies focused on NIR laser-induced hyperthermia due to photoexcitation of graphene oxide (GO) and reduced graphene oxide (rGO). Relevant parameters such as the amount of GO/rGO, the influence of the laser wavelength and power density are considered. Moreover, the required temperature and exposure time for each antitumor/antipathogenic case are collected and unified in a thermal dose parameter: the CEM43.

RESULTS

The calculated CEM43 thermal doses revealed a great variability for the same type of tumor/strain. In order to detect potential tendencies, the values were classified into four ranges, varying from CEM43 < 60 min to CEM43 ≥ 1 year. Thus, a preference for moderate thermal doses of CEM43 < 1 year was detected in antitumor activity, with temperatures ≤ 50 °C and exposure time ≤ 15 min. In case of the antipathogenic studies, the most used thermal dose was higher, CEM43 ≥ 1 year, with ablative hyperthermia (> 60ºC).

CONCLUSIONS

The ability of GO/rGO as effective photothermal conversion agents to promote a controlled hyperthermia is proven. The variability found for the CEM43 thermal doses on the reviewed studies reveals the potentiality to evaluate, for each application, the use of lower temperatures, by modulating time and/or repetitions in the doses.

Hydroxyapatite-based carriers for tumor targeting therapy

At present, targeted drug delivery is regarded as the most effective means of tumor treatment, overcoming the lack of conventional chemotherapeutics that are difficult to reach or enter into cancer cells. Hydroxyapatite (HAP) is the main component of biological hard tissue, which can be regarded as a suitable drug carrier due to its biocompatibility, nontoxicity, biodegradation, and absorbability. This review focuses on the cutting edge of HAP as a drug carrier in targeted drug delivery systems. HAP-based carriers can be obtained by doping, modification, and combination, which benefit to improve the loading efficiency of drugs and the response sensitivity of the microenvironment in the synthesis process. The drug adsorbed or in situ loaded on HAP-based carriers can achieve targeted drug delivery and precise treatment through the guidance of the in vivo microenvironment and the stimulation of the in vitro response. In addition, HAP-based drug carriers can improve the cellular uptake rate of drugs to achieve a higher treatment effect. These advantages revealed the promising potential of HAP-based carriers from the perspective of targeted drug delivery for tumor treatment.

Graphene family in cancer therapy: recent progress in cancer gene/drug delivery applications

In the past few years, the development in the construction and architecture of graphene based nanocomplexes has dramatically accelerated the use of nano-graphene for therapeutic and diagnostic purposes, fostering a new area of nano-cancer therapy. To be specific, nano-graphene is increasingly used in cancer therapy, where diagnosis and treatment are coupled to deal with the clinical difficulties and challenges of this lethal disease. As a distinct family of nanomaterials, graphene derivatives exhibit outstanding structural, mechanical, electrical, optical, and thermal capabilities. Concurrently, they can transport a wide variety of synthetic agents, including medicines and biomolecules, such as nucleic acid sequences (DNA and RNA). Herewith, we first provide an overview of the most effective functionalizing agents for graphene derivatives and afterward discuss the significant improvements in the gene and drug delivery composites based on graphene.

Fabrication and properties of multi-functional polydopamine coated Cu/F-codoped hydroxyapatite hollow microspheres as drug carriers

Due to its excellent bone conductivity and drug adsorption as well as pH-responsive drug release property, hydroxyapatite (HAp) is widely used as a drug carrier in bone repair field. Here, we report for the first time a novel multi-functional polydopamine (PDA) coated Cu/F-codoped HAp (Cu/F-HAp-PDA) hollow microspheres. Both Cu²⁺ and F^- were successfully doped into the lattice of HAp and uniformly distributed in the shell of hollow microspheres through a one-step hydrothermal synthesis. Then PDA was coated homogeneously on the outer layer of Cu/F-HAp hollow microspheres. Both Cu/F-HAp and Cu/F-HAp-PDA samples displayed high drug loading efficiency and pH responsive drug release behavior. Moreover, the obtained Cu/F-HAp-PDA hollow microspheres exhibited excellent photothermal conversion efficiency and photothermal stability. The molecular dynamics simulations showed that PDA and HAp can form mutual binding mainly through Ca-O bonding, while doxorubicin (DOX) is mainly bound to PDA molecules through hydrogen bonding and π-π stacking interaction.

Graphene oxide reinforced SrHAP composite as a drug carrier in bone regeneration

Strontium substituted HAP (SrHAP), with a 10 mol% substitution, was mineralized on increasing weight percentages of graphene oxide (2, 4 and 6). The GS composites were comprehensively characterized for drug delivery in bone reconstruction. The formation of SrHAP was verified by XRD and FT-IR results. The apatite crystallization was influenced by graphene oxide content and strontium. The EDS results confirmed the presence of strontium and HR-SEM depicted rod shape apatite, of length between 58 and 135 nm, uniformly embedded on graphene oxide. The reinforcement of graphene oxide increased the surface area, porosity, microhardness (upto 0.59 GPa), protein adsorption (upto 18.16 μg/mg), water uptake and degradation properties. Also, the increase in graphene oxide fraction significantly enhanced the curcumin encapsulation efficiency (upto 80.16%) and the drug release was considerably retarded over SrHAP. The in vitro studies using human osteoblast-like MG-63 cells demonstrated that curcumin-loaded composite was biocompatible and promoted proliferation, differentiation and matrix mineralization. The results highlight the combinational therapy of osteogenic ion (strontium) and osteogenic drug (curcumin) as a promising platform in bone tissue engineering.

Graphene and graphene oxide with anticancer applications: Challenges and future perspectives

Graphene-based materials have shown immense pertinence for sensing/imaging, gene/drug delivery, cancer therapy/diagnosis, and tissue engineering/regenerative medicine. Indeed, the large surface area, ease of functionalization, high drug loading capacity, and reactive oxygen species induction potentials have rendered graphene- (G-) and graphene oxide (GO)-based (nano)structures promising candidates for cancer therapy applications. Various techniques namely liquid-phase exfoliation, Hummer's method, chemical vapor deposition, chemically reduced GO, mechanical cleavage of graphite, arc discharge of graphite, and thermal fusion have been deployed for the production of G-based materials. Additionally, important criteria such as biocompatibility, bio-toxicity, dispersibility, immunological compatibility, and inflammatory reactions of G-based structures need to be systematically assessed for additional clinical and biomedical appliances. Furthermore, surface properties (e.g., lateral dimension, charge, corona influence, surface structure, and oxygen content), concentration, detection strategies, and cell types are vital for anticancer activities of these structures. Notably, the efficient accumulation of anticancer drugs in tumor targets/tissues, controlled cellular uptake properties, tumor-targeted drug release behavior, and selective toxicity toward the cells are crucial criteria that need to be met for developing future anticancer G-based nanosystems. Herein, important challenges and future perspectives of cancer therapy using G- and GO-based nanosystems have been highlighted, and the recent advancements are deliberated.

Au Catalyzing Control Release NO in vivo and Tumor Growth-Inhibiting Effect in Chemo-Photothermal Combination Therapy

INTRODUCTION

Aim to obtain a NO donor that can control released NO in vivo with the high efficacy of tumor suppression and targeting, a nanoplatform consisting of FA-Fe3O4@mSiO2-Au/DOX was constructed.

METHODS

In vitro, the nanoplatform catalyzed NO's release with the maximum value of 4.91 μM within 60 min at 43°C pH=5.0, which was increased by 1.14 times when the temperature was 37°C. In vivo, 11.7 μg Au in the tumor tissue was found to catalyze S-nitrosoglutathione continuously, and 54 μM NO was checked out in the urine.

RESULTS AND DISCUSSION

The high concentration of NO was found to increase the apoptotic rate and to reduce tumor proliferation. In the chemo-photothermal combination therapy, the tumor inhibition rate was increased up to 94.3%, and Au's contribution from catalyzing NO release NO was 8.17%.

Carbon-based nanomaterials for targeted cancer nanotherapy: recent trends and future prospects

Carbon-based nanomaterials are becoming attractive materials due to their unique structural dimensions and promising mechanical, electrical, thermal, optical and chemical characteristics. Carbon nanotubes, graphene, graphene oxide, carbon and graphene quantum dots have numerous applications in diverse areas, including biosensing, drug/gene delivery, tissue engineering, imaging, regenerative medicine, diagnosis, and cancer therapy. Cancer remains one of the major health problems all over the world, and several therapeutic approaches are focussed on designing targeted anticancer drug delivery nanosystems by applying benign and less hazardous resources with high biocompatibility, ease of functionalization, remarkable targeted therapy issues, and low adverse effects. This review highlights the recent development on these carbon based-nanomaterials in the field of targeted cancer therapy and discusses their possible and promising diagnostic and therapeutic applications for the treatment of cancers.

Recent advances in graphene-family nanomaterials for effective drug delivery and phototherapy

INTRODUCTION

Owing to the unique properties of graphene, including large specific surface area, excellent thermal conductivity, and optical absorption, graphene-family nanomaterials (GFNs) have attracted extensive attention in biomedical applications, particularly in drug delivery and phototherapy.

AREAS COVERED

In this review, we point out several challenges involved in the clinical application of GFNs. Then, we provide an overview of the most recent publications about GFNs in biomedical applications, including diverse strategies for improving the biocompatibility, specific targeting and stimuli-responsiveness of GFNs for drug delivery, codelivery of drug and gene, photothermal therapy, photodynamic therapy, and multimodal combination therapy.

EXPERT OPINION

Although the application of GFNs is still in the preclinical stage, rational modification of GFNs with functional elements or making full use of GFNs-based multimodal combination therapy might show great potential in biomedicine for clinical application.

Facile synthesis of biocompatible L-cysteine-modified MoS2 nanospheres with high photothermal conversion efficiency for photothermal therapy of tumor

Photothermal therapy (PTT) can take advantage of the photothermal effects of photothermal agents to acquire the energy from laser irradiation and convert it into heat. This can intensively elevate the temperature of the surrounding environment to directly destroy the cancer cells. It is expected that PAs with strong absorption in near infrared (NIR) range might possess the ideal tissue-transparent feature and minimal damage to surrounding healthy tissues, beneficial to the practical application. Herein, well-dispersed L-cysteine modified MoS₂ (MoS₂-Cys) nanospheres with the average diameter of about 422 nm and strong NIR adsorption were successfully synthesized through a facile method. The as-prepared MoS₂-Cys nanospheres are composed of nanosheets with the average thickness of about 13.7 nm. The photothermal conversion efficiency of the as-prepared MoS₂-Cys nanospheres with the very low concentration of 50 μg/mL was determined to be 35% when exposed to 808 NIR laser at the power density of 0.8 W/cm², much higher than those of the previous reports with same dose and power density. MoS₂-Cys nanospheres possessed the good photothermal ablation effect to significantly inhibit the growth of tumor in vivo. Furthermore, MoS₂-Cys nanospheres did not exhibit detectable side effects, suggesting their good in vitro and in vivo biocompatibility.

Magnetic targeting cobalt nanowire-based multifunctional therapeutic system for anticancer treatment and angiogenesis

In order to improve the anticancer therapeutic efficacy and postoperative recovery efficacy, the novel anticancer therapeutic system should have the ability to promote angiogenesis after anticancer therapy besides the excellent anticancer therapeutic efficacy. We present herein a magnetic targeting multifunctional anticancer therapeutic system based on cobalt nanowires (CoNWs) for anticancer therapy and angiogenesis. Magnetic characterization shows that the CoNWs can be concentrated in desired locations under the external magnetic field, which is favorable for anticancer target therapy. Besides, drug loading/release characterization reveals that the CoNWs interact with doxorubicin (DOX) by electrostatic interaction, and accordingly form a composite which can release DOX with temperature increase under near-infrared light (NIR) treatment. And anticancer test reveals that the nanowires loaded with the DOX (CoNWs-DOX) can produce an effective chemo-photothermal synergistic therapeutic effect against murine breast cancer cell lines (4T1) and human osteosarcoma cell lines (MG63) under NIR treatment. Furthermore, angiogenesis assessment reveals that the released cobalt ion from the nanowires can significantly enhance the angiogenesis efficacy after cancer treatment. These results suggest that the constructed anticancer therapeutic system provides a promising multifunctional platform for cancer treatment and postoperative recovery.

Tumor microenvironment and NIR laser dual-responsive release of berberine 9-O-pyrazole alkyl derivative loaded in graphene oxide nanosheets for chemo-photothermal synergetic cancer therapy

A berberine 9-O-pyrazole alkyl derivative, a chemical compound (called B3) previously synthesized by our group, shows anti-cancer activity. However, B3 lacks targeting cytotoxicity to cancer cells, leading to obvious toxic side effects on normal cells. To solve this problem, here, we prepared a drug delivery system, namely, AS1411-GO/B3 for tumor targeting, in which nano-graphene oxide (GO) sheets were employed as the drug carrier, and the aptamer AS1411 was conjugated onto GO for tumor targeting. GO also had a photothermal effect, which helped the release of B3 from GO as well as the thermal cytotoxicity to cells. We found that the release of B3 could respond to acid conditions, indicating that the tumor intracellular environment could promote the release of B3, thus allowing it to perform chemotherapy effects. This system could also release B3 in response to photothermal heating, moreover, combined photothermal therapy and chemotherapy to improve the anticancer activity was achieved. This AS1411-GO/B3 platform with chemo-photothermal synergetic therapy provides a very promising treatment for tumors.

Multifunctional Surface with Enhanced Angiogenesis for Improving Long-Term Osteogenic Fixation of Poly(ether ether ketone) Implants

Poly(ether ether ketone) (PEEK) is a biocompatible polymer, but the lack of angiogenesis makes the long-term osteogenic fixation of PEEK implants challenging, which has hampered their wider application in orthopedics. Herein, we develop a multifunctional micro-/nanostructured surface presenting hydroxyapatite (HA) nanoflowers and nickel hydroxide (Ni(OH)₂) nanoparticles on PEEK implants (sPEEK-Ni-HA) to tackle the problem. The results show that the reasonable release of Ni²⁺ from sPEEK-Ni-HA significantly facilitates the migration, tube formation, and angiogenic gene expression of human umbilical vein endothelial cells (HUVECs). In addition to angiogenesis, the sPEEK-Ni-HA displays enhanced cytocompatibility and osteogenicity in terms of cell proliferation, spreading, alkaline phosphatase activity, matrix mineralization, and osteogenesis-related gene secretion, exceeding pure and other multifunctional sPEEK samples. Importantly, in vivo evaluations employing a rabbit femoral condyle implantation model confirm that such dual decoration of Ni elements and HA nanoflowers boosts bone remodeling/osseointegration, which dramatically promotes the in vivo osteogenic fixation of implants. Therefore, this work not only sheds light on the significance of angiogenesis on the osteogenic fixation of an implant but also presents a facile strategy to empower bioinert PEEK with a well-orchestrated feature of angiogenesis and osteogenesis.