Microcomputed tomography imaging in a rat model of delayed union/non-union fracture

A new method for segmentation and analysis of bone callus in rodent fracture models using micro-CT

Fracture burden has created a need to better understand bone repair processes under different pathophysiological states. Evaluation of structural and material properties of the mineralized callus, which is integral to restoring biomechanical stability is, therefore, vital. Microcomputed tomography (micro-CT) can facilitate noninvasive imaging of fracture repair, however, current methods for callus segmentation are only semiautomated, restricted to defined regions, time/labor intensive, and prone to user variation. Herein, we share a new automatic method for segmenting callus in micro-CT tomograms that will allow for objective, quantitative analysis of the bone fracture microarchitecture. Fractured and nonfractured mouse femurs were scanned and processed by both manual and automated segmentation of fracture callus from cortical bone after which microarchitectural parameters were analyzed. All segmentation and analysis steps were performed using CTAn (Bruker) with automatic segmentation performed using the software's image-processing plugins. Results showed automatic segmentation reliably and consistently segmented callus from cortical bone, demonstrating good agreement with manual methods with low bias: tissue volume (TV): -0.320 mm3 , bone volume (BV): 0.0358 mm3 , and bone volume/tissue volume (BV/TV): -3.52%, and was faster and eliminated user-bias and variation. Method scalability and translatability across rodent models were verified in scans of fractured rat femora showing good agreement with manual methods with low bias: TV: -3.654 mm3 , BV: 0.830 mm3 , and BV/TV: 7.81%. Together, these data validate a new automated method for segmentation of callus and cortical bone in micro-CT tomograms that we share as a fast, reliable, and less user-dependent tool for application to study bone callus in fracture, and potentially elsewhere.

Animal models of impaired long bone healing and tissue engineering- and cell-based in vivo interventions

Bone healing after injury typically follows a systematic process and occurs spontaneously under appropriate physiological conditions. However, impaired long bone healing is still quite common and may require surgical intervention. Various complications can result in different forms of impaired bone healing including nonunion, critical-size defects, or stress fractures. While a nonunion may occur due to impaired biological signaling and/or mechanical instability, a critical-size defect exhibits extensive bone loss that will not spontaneously heal. Comparatively, a stress fracture occurs from repetitive forces and results in a non-healing crack or break in the bone. Clinical standards of treatment vary between these bone defects due to their pathological differences. The use of appropriate animal models for modeling healing defects is critical to improve current treatment methods and develop novel rescue therapies. This review provides an overview of these clinical bone healing impairments and current animal models available to study the defects in vivo. The techniques used to create these models are compared, along with the outcomes, to clarify limitations and future objectives. Finally, rescue techniques focused on tissue engineering and cell-based therapies currently applied in animal models are specifically discussed to analyze their ability to initiate healing at the defect site, providing information regarding potential future therapies. In summary, this review focuses on the current animal models of nonunion, critical-size defects, and stress fractures, as well as interventions that have been tested in vivo to provide an overview of the clinical potential and future directions for improving bone healing.

Development of a novel atrophic non-union model in rabbits: A preliminary study

Background and aim

The currently available atrophic non-union models rely on wide segmental excision of bone diaphysis to impede the process of healing but lack resemblance to the clinical scenario. The present study focused on developing an in vivo model of atrophic non-union fracture in rabbit radius that can replicate the clinical scenario.

Materials and methods

The atrophic non-union fracture model was developed by creating a 10 mm segmental bone defect in the radial diaphysis of five adult New Zealand White rabbits. The periosteum (2 mm) of the cut bone ends was cauterized using electrocautery to induce atrophy. Atrophic non-union was confirmed using radiographic and histologic evaluations on 30th postoperative day.

Results

The radiographic signs of healing were completely absent in all the rabbits on 30th postoperative day, indicating inert bone ends. Histological findings further confirmed the presence of inert bone ends, indicating the development of atrophic non-union.

Conclusion

The combination of the segmental bone defect, electrocautery induced thermal damage of bone end periosteum, and delayed treatment can induce the development of atrophic non-union fracture model in rabbits that can replicate the clinical scenario.

•

In vivo model of atrophic non-union fracture in rabbit radius was developed that can replicate the clinical scenario.

•

Radiographic and histological findings confirmed the presence of inert bone ends.

•

Combination of segmental bone defect, electrocautery induced thermal damage, and delayed treatment can induce atrophic non-union fracture.

Robust method to create a standardized and reproducible atrophic non-union model in a rat femur

Objective

No evidence exists about which biological approach is more reliable for creating non-union model. We investigated how to create a reproducible atrophic non-union model in a rat femur.

Methods

We compared three groups: simple osteotomy (group A), partial periosteum cauterization (group B), and extensive periosteum and bone marrow resection (group C).

Results

All samples in group C demonstrated atrophic non-union in radiological, histological, and biomechanical analyses, however half of the samples in group B showed fracture healing at week 16.

Conclusion

Extensive resection of periosteum and bone marrow is important for a reproducible atrophic non-union model in a rat femur.

Development of a novel murine delayed secondary fracture healing in vivo model using periosteal cauterization

INTRODUCTION

Delayed union and nonunion development remain a major clinical problematic complication during fracture healing, with partially unclear pathophysiology. Incidences range from 5 to 40% in high-risk patients, such as patients with periosteal damage. The periosteum is essential in adequate fracture healing, especially during soft callus formation. In this study, we hypothesize that inducing periosteal damage in a murine bone healing model will result in a novel delayed union model.

MATERIALS AND METHODS

A mid-shaft femoral non-critically sized osteotomy was created in skeletally mature C57BL/6 mice and stabilized with a bridging plate. In half of the mice, a thin band of periosteum adjacent to the osteotomy was cauterized. Over 42 days of healing, radiographic, biomechanical, micro-computed tomography and histological analysis was performed to assess the degree of fracture healing.

RESULTS

Analysis showed complete secondary fracture healing in the control group without periosteal injury. Whereas the periosteal injury group demonstrated less than half as much maximum callus volume (p < 0.05) and bridging, recovery of stiffness and temporal expression of callus growth and remodelling was delayed by 7-15 days.

CONCLUSION

This paper introduces a novel mouse model of delayed union without a critically sized defect and with standardized biomechanical conditions, which enables further investigation into the molecular biological, biomechanical, and biochemical processes involved in (delayed) fracture healing and nonunion development. This model provides a continuum between normal fracture healing and the development of nonunions.

Fully automated segmentation of callus by micro-CT compared to biomechanics

Background

A high percentage of closed femur fractures have slight comminution. Using micro-CT (μCT), multiple fragment segmentation is much more difficult than segmentation of unfractured or osteotomied bone. Manual or semi-automated segmentation has been performed to date. However, such segmentation is extremely laborious, time-consuming and error-prone. Our aim was to therefore apply a fully automated segmentation algorithm to determine μCT parameters and examine their association with biomechanics.

Methods

The femura of 64 rats taken after randomised inhibitory or neutral medication, in terms of the effect on fracture healing, and controls were closed fractured after a Kirschner wire was inserted. After 21 days, μCT and biomechanical parameters were determined by a fully automated method and correlated (Pearson’s correlation).

Results

The fully automated segmentation algorithm automatically detected bone and simultaneously separated cortical bone from callus without requiring ROI selection for each single bony structure. We found an association of structural callus parameters obtained by μCT to the biomechanical properties. However, results were only explicable by additionally considering the callus location.

Conclusions

A large number of slightly comminuted fractures in combination with therapies that influence the callus qualitatively and/or quantitatively considerably affects the association between μCT and biomechanics. In the future, contrast-enhanced μCT imaging of the callus cartilage might provide more information to improve the non-destructive and non-invasive prediction of callus mechanical properties. As studies evaluating such important drugs increase, fully automated segmentation appears to be clinically important.

Comparative study of the effect of PTH (1-84) and strontium ranelate in an experimental model of atrophic nonunion

This study aimed to set up an experimental model of long bone atrophic nonunion and to explore the potential role of PTH-1-84 (PTH 1-84) and strontium ranelate (SrR). A model of atrophic nonunion was created in Sprague-Dawley rats at the femoral midshaft level. The animals were randomised into four groups. Group A1: control rodents, fracture without bone gap; Group A2: rodents with subtraction osteotomy (non-union model control) treated with saline; Group B: rodents with subtraction osteotomy treated with human-PTH (PTH 1-84); and Group C: rodents with subtraction osteotomy treated with strontium ranelate (SrR). The groups were followed for 12 weeks. X-rays were be obtained at weeks 1, 6 and 12. After sacrificing the animals, we proceeded to the biomechanical study and four point bending tests to evaluate the resistance of the callus and histological study. In second phase, the expression of genes related to osteoblast function was analysed by reverse transcription-quantitative PCR in rats subjected to substraction osteotomy and treated for 2 weeks. The animals were randomised into three groups: Group A2: rodents treated with saline; Group B: rodents treated with PTH 1-84 and Group C: rodents treated with SrR.

RESULTS

No significant histological differences were found between animals subjected to subtraction osteotomy and treated with either saline or PTH (p=0.628), but significant difference existed between animals receiving saline or SrR (p=0.005). There were no significant differences in X-ray score between the saline and PTH groups at either 6 or 12 weeks (p=0.33 and 0.36, respectively). On the other hand, better X-ray scores were found in the SrR group (p=0.047 and 0.006 in comparison with saline, at 6 and 12 weeks, respectively). In line with this, biomechanical tests revealed improved results in the SrR group. Gene expression analysis revealed a slightly decreased levels of DKK1, a Wnt pathway inhibitor, in rats treated with SrR.

CONCLUSIONS

SrR increases has a beneficial effect in this atrophic non-union model in rats. This suggests that it might have a role may have important implications for the potential clinical role in the treatment of fracture nonunion.

Adjustable stiffness, external fixator for the rat femur osteotomy and segmental bone defect models

The mechanical environment around the healing of broken bone is very important as it determines the way the fracture will heal. Over the past decade there has been great clinical interest in improving bone healing by altering the mechanical environment through the fixation stability around the lesion. One constraint of preclinical animal research in this area is the lack of experimental control over the local mechanical environment within a large segmental defect as well as osteotomies as they heal. In this paper we report on the design and use of an external fixator to study the healing of large segmental bone defects or osteotomies. This device not only allows for controlled axial stiffness on the bone lesion as it heals, but it also enables the change of stiffness during the healing process in vivo. The conducted experiments have shown that the fixators were able to maintain a 5 mm femoral defect gap in rats in vivo during unrestricted cage activity for at least 8 weeks. Likewise, we observed no distortion or infections, including pin infections during the entire healing period. These results demonstrate that our newly developed external fixator was able to achieve reproducible and standardized stabilization, and the alteration of the mechanical environment of in vivo rat large bone defects and various size osteotomies. This confirms that the external fixation device is well suited for preclinical research investigations using a rat model in the field of bone regeneration and repair.

The optimal carrier for BMP-2: a comparison of collagen versus fibrin matrix

INTRODUCTION

The aim of our study was to investigate in vitro and in a new in vivo rat model for impaired bone healing whether a low dose BMP-2 preparation in fibrin would be equivalent or better than the combination of collagen and a high dose of BMP-2 which is currently in clinical use.

MATERIALS AND METHODS

In a 14 day period we compared the in vitro release kinetics of an absorbable collagen sponge (ACS) with 72 μg rhBMP-2 in the BMPC group and fibrin matrix with 10 μg rhBMP-2 in the BMPF group. In our in vivo experiment a critical sized osteotomy was performed in the rat femur, which was filled with a spacer, inhibiting bone formation for a period of 4 weeks. In a second operation this spacer was removed and the test item was applied into the defect. We compared the BMPF and BMPC groups with the ACS alone, FIBRIN alone and the EMPTY (4w/8w) control groups. 4 and 8 weeks after the second operation, specimens were analysed by X-ray and μCT imaging. Mechanically stable femurs were biomechanically evaluated.

RESULTS

Cumulative BMP-2 release was five times higher in the BMPF group than in the BMPC group during the observation period. μCT analysis revealed that both the extent of bone union and the bone volume were significantly higher in the group with a lower dose of BMP-2 in fibrin matrix than in the groups without BMP-2 treatment. However there was no statistically significant difference between the BMPF and BMPC groups.

CONCLUSION

We conclude that fibrin matrix is an excellent carrier for BMP-2 and that it provides equivalent results with a sevenfold lower dose of BMP-2 compared with ACS.

In vivo models of bone repair

This review is aimed at clinicians appraising preclinical trauma studies and researchers investigating compromised bone healing or novel treatments for fractures. It categorises the clinical scenarios of poor healing of fractures and attempts to match them with the appropriate animal models in the literature.

We performed an extensive literature search of animal models of long bone fracture repair/nonunion and grouped the resulting studies according to the clinical scenario they were attempting to reflect; we then scrutinised them for their reliability and accuracy in reproducing that clinical scenario.

Models for normal fracture repair (primary and secondary), delayed union, nonunion (atrophic and hypertrophic), segmental defects and fractures at risk of impaired healing were identified. Their accuracy in reflecting the clinical scenario ranged greatly and the reliability of reproducing the scenario ranged from 100% to 40%.

It is vital to know the limitations and success of each model when considering its application.

Local BMP-2 application can rescue the delayed osteotomy healing in a rat model

Delayed healing is still a severe complication in the clinic. The aim of the present study was to investigate the effect of locally delivered BMP-2 incorporated in a poly(d,l-lactide) (PDLLA) implant coating in a rat model with delayed tibial healing. The healing delay in this model is not caused by mechanical instability or additional tissue manipulation and presents therefore a common and challenging clinical situation of impaired healing. Radiological, histological and biomechanical evaluations were performed at days 5, 10, 28, 42, and 84 after tibial osteotomy. The control group showed a delayed healing without complete bridging and without reaching the biomechanical stability of the contralateral tibiae after 84 days. The mechanical stability of the BMP-treated tibiae showed a significant increase at days 28 and 42 compared to the control group and exceeded the stability of the intact contralateral tibiae. Less cartilage was detected at day 28 and the mineralisation was significantly enhanced at day 42 due to the local BMP application. Looking at the early healing phase (day 10) a reduced vascularisation was seen in the BMP group. This reflects the situation seen during normal healing, whereas the delayed healing in the present model had an increased vascularisation. The present study clearly demonstrates that local BMP-2 application can stimulate delayed healing in a clinically relevant animal model.

In vivo photoacoustic imaging of osteosarcoma in a rat model

Osteosarcoma is one of the most common primary malignant tumors of the bone and the second leading cause of cancer-related deaths in the pediatric age group. Confirmed diagnosis and prompt treatment of osteosarcoma are critical for effective prognosis. In this study, we investigate the application of photoacoustic imaging (PAI) for the detection of osteosarcoma in an animal model. Cross-section images of a normal rat leg and a tumorous rat leg were successfully reconstructed in vivo. Morphological changes and the development of the implanted osteosarcoma were accurately mapped with time-dependent photoacoustic images. Furthermore, we evaluate the use of gold nanorods as contrast agents for imaging osteosarcoma with PAI. This is the first study that uses PAI to detect osteosarcoma in vivo, and the results suggest that PAI has the potential clinical application for detecting osteosarcoma in the early stage.

Mechanical characterization of external fixator stiffness for a rat femoral fracture model

Clinical and experimental studies have shown that several mechanical factors influence the fracture healing process. One such factor, interfragmentary movement, is affected by loading and the stiffness of the fixation device. This study evaluated the stiffness of different external fixation devices for a rat femoral fracture model, using in vitro and analytical methods. The contribution to the stiffness of the fixation construct was dominated by the flexibility of the pins in relation to their offset, diameter, and material properties. The axial stiffness increased with decreasing offset and increasing pin diameter. Titanium pins resulted in significantly lower axial stiffness compared to stainless steel pins of the same design. The fixator body material and fixator length had a less pronounced influence on fixation stiffness. Mechanically characterized external fixation devices will allow in vivo study of the fracture healing process utilizing pre-calculated fracture fixation stiffness. These characterized fixation devices will allow controlled manipulation of the axial and shear interfragmentary movement to achieve a flexible fixation resulting in callus formation compared to a more rigid fixation limiting callus formation in a rat femoral fracture model.

muCT-based measurement of cortical bone graft-to-host union

Evaluation of structural bone grafts risk of failure requires noninvasive quantitative predictors of functional strength. We hypothesized that a quantitative graft-to-host union biometric would correlate significantly with biomechanical properties as a surrogate for the risk of fracture. To test this, we developed a novel algorithm to compute the union between host callus and graft, which was termed the union ratio. We compared the union ratio of live autografts to devitalized allografts implanted into the mid-diaphysis of mouse femurs for 6 and 9 wk. Surprisingly, the autograft union ratio decreased from 0.228 +/- 0.029 at 6 wk to 0.15 +/- 0.011 at 9 wk (p < 0.05) and did not correlate with the torsional properties of the autografts. The allograft union ratio was 0.105 +/- 0.023 at 6 wk but increased to 0.224 +/- 0.029 at 9 wk (p < 0.05). As a single variable, the union ratio correlated significantly with ultimate torque (R (2) = 0.58) and torsional rigidity (R (2) = 0.51) of the allografts. Multivariable regression analyses of allografts that included the union ratio, the graft bone volume, the maximum and minimum polar moment of inertia, and their first-order interaction terms with the union ratio as independent variables resulted in significant correlations with the ultimate torque and torsional rigidity (adjusted R (2) = 0.80 and 0.89, respectively). These results suggest that, unlike live autografts, the union between the devitalized allograft and host contributes significantly to the strength of grafted bone. The union ratio has important clinical implications as a novel biometric for noninvasive assessment of functional strength and failure risk.