Applications of silica supports in affinity chromatography

Precursor carboxy-silica for functionalization with interactive ligands. III. Carbodiimide assisted preparation of immobilized lectin stationary phases for high performance lectin affinity chromatography of sub-glycoproteomics from cancer and disease free human sera

In this study, a precursor carboxy-silica support was demonstrated in the immobilization of two different lectins, namely concanavalin A (Con A) and wheat germ agglutinin (WGA) for use in high performance lectin affinity chromatography (LAC) for the selective capturing and enrichment of glycoproteins from healthy/disease free and cancer human sera. The lectin columns thus obtained (i.e., Con A- and WGA-columns) showed no nonspecific interactions toward some chosen standard glycoproteins and non-glycoproteins. Both columns were shown in sub-glycoproteomics enrichment from human sera including disease free and adenocarcinoma cancer sera. The collected fractions were subjected to LC-MS/MS for identification of the captured glycoproteins, whereby the total number of identified proteins using Con A column from disease-free and cancer sera were 164 and 188, respectively while 133 and 103 proteins were identified in the fractions captured by the WGA column from disease-free and cancer sera samples, respectively. Differentially expressed proteins (DEPs) between the disease free and cancer sera in both the Con A and WGA column fractions were identified via the plot of the abundance vs. the protein ratio whereby the binary logarithm of average intensities of cancer and disease free sera were plotted against the binary logarithm of cancer/disease free sera ratios. The proteins that exhibit log 2 (cancer/healthy) ratio values greater than +2 and less than -2 in both categories are considered as DEPs. Furthermore, for visualization of the data arrangement, Q-Q scatterplot were also used whereby the binary logarithm of cancer serum was plotted against the binary logarithm of disease-free serum for both Con A and WGA. For Con A column, 28 up-regulated and 10 down regulated proteins were identified with a total of 38 DEPs while only two being non-glycoproteins. Furthermore, the up-regulated, and down regulated proteins recorded for WGA column are 14 and 6, respectively, totaling 20 proteins including 3 non-glycoproteins. Some of the non-specific binding to lectin are most likely due to protein-protein interactions.

Protein Attachment Mechanism for Improved Functionalization of Affinity Monolith Chromatography (AMC)

This work aims at understanding the attachment mechanisms and stability of proteins on a chromatography medium to develop more efficient functionalization methodologies, which can be exploited in affinity chromatography. In particular, the study was focused on the understanding of the attachment mechanisms of bovine serum albumin (BSA), used as a ligand model, and protein G on novel amine-modified alumina monoliths as a stationary phase. Protein G was used to develop a column for antibody purification. The results showed that, at lower protein concentrations (i.e., 0.5 to 1.0 mg·mL⁻¹), protein attachment follows a 1st-order kinetics compatible with the presence of covalent binding between the monolith and the protein. At higher protein concentrations (i.e., up to 10 mg·mL⁻¹), the data preferably fit a 2nd-order kinetics. Such a change reflects a different mechanism in the protein attachment which, at higher concentrations, seems to be governed by physical adsorption resulting in a multilayered protein formation, due to the presence of ligand aggregates. The threshold condition for the prevalence of physical adsorption of BSA was found at a concentration higher than 1.0 mg·mL⁻¹. Based on this result, protein concentrations of 0.7 and 1.0 mg·mL⁻¹ were used for the functionalization of monoliths with protein G, allowing a maximum attachment of 1.43 mg of protein G/g of monolith. This column was then used for IgG binding–elution experiments, which resulted in an antibody attachment of 73.5% and, subsequently, elution of 86%, in acidic conditions. This proved the potential of the amine-functionalized monoliths for application in affinity chromatography.

Affinity monolith chromatography: A review of general principles and recent developments

Affinity monolith chromatography (AMC) is a liquid chromatographic technique that utilizes a monolithic support with a biological ligand or related binding agent to isolate, enrich, or detect a target analyte in a complex matrix. The target-specific interaction exhibited by the binding agents makes AMC attractive for the separation or detection of a wide range of compounds. This article will review the basic principles of AMC and recent developments in this field. The supports used in AMC will be discussed, including organic, inorganic, hybrid, carbohydrate, and cryogel monoliths. Schemes for attaching binding agents to these monoliths will be examined as well, such as covalent immobilization, biospecific adsorption, entrapment, molecular imprinting, and coordination methods. An overview will then be given of binding agents that have recently been used in AMC, along with their applications. These applications will include bioaffinity chromatography, immunoaffinity chromatography, immobilized metal-ion affinity chromatography, and dye-ligand or biomimetic affinity chromatography. The use of AMC in chiral separations and biointeraction studies will also be discussed.

Recent Advances in Lectin-Based Affinity Sorbents for Protein Glycosylation Studies

Glycosylation is one of the most significant post-translational modifications occurring to proteins, since it affects some of their basic properties, such as their half-life or biological activity. The developments in analytical methodologies has greatly contributed to a more comprehensive understanding of the quantitative and qualitative characteristics of the glycosylation state of proteins. Despite those advances, the difficulty of a full characterization of glycosylation still remains, mainly due to the complexity of the glycoprotein and/or glycopeptide mixture especially when they are present in complex biological samples. For this reason, various techniques that allow a prior selective enrichment of exclusively glycosylated proteins or glycopeptides have been developed in the past and are coupled either on- or off- line with separation and detection methods. One of the most commonly implemented enrichment methods includes the use of lectin proteins immobilized on various solid supports. Lectins are a group of different, naturally occurring proteins that share a common characteristic, which concerns their affinity for specific sugar moieties of glycoproteins. This review presents the different formats and conditions for the use of lectins in affinity chromatography and in solid phase extraction, including their use in dispersive mode, along with the recent progress made on either commercial or home-made lectin-based affinity sorbents, which can lead to a fast and automated glycosylation analysis.

Characterization of drug binding with alpha1-acid glycoprotein in clinical samples using ultrafast affinity extraction

Many drugs bind to serum transport proteins, which can affect both drug distribution and activity in the body. α₁-Acid glycoprotein (AGP) is a key transport protein for basic and neutral drugs. Both elevated levels and altered glycosylation patterns of AGP have been seen in clinical conditions such as systemic lupus erythematosus (SLE). This study developed, optimized, and used the method of ultrafast affinity extraction (UAE) to examine whether these changes in AGP are associated with changes in the binding by some drugs to this transport protein. This approach used affinity microcolumns to capture and measure, in serum, the free fractions of several drugs known to bind AGP. These measurements were made with pooled normal control serum and serum samples from individuals with SLE. Immunoaffinity chromatography was used to obtain the content of AGP and HSA in these samples, and CE was used to examine the glycoform pattern for AGP in each serum sample. The free drug fractions measured for normal control serum ranged from 3.5 to 29.1%, in agreement with the results of ultrafiltration, and provided binding constants of ~10⁵-10⁶ M^-1 for the given drugs with AGP at 37⁰C. Analysis of a screening set of SLE serum samples by UAE gave decreased free fractions (relative change, 12-55%) vs normal serum when spiked with the same types and amounts of drugs. These changes were related in some cases to AGP content, with some SLE samples having AGP levels 1.3- to 2.1-fold above the upper end of the normal range. In other cases, the changes in free fractions appeared to be linked to alterations in the glycoforms and binding constants of AGP, with some affinities differing by 1.2- to 1.5-fold vs normal AGP. This approach can be employed with other solute-protein systems and to investigate binding by other drugs or transport proteins directly in clinical samples.

Screening and identification of bioactive components resistant to metallo-beta-lactamase from Schisandra chinensis (Turcz.) Baill. by metalloenzyme-immobilized affinity chromatography

The screening and identification of bioactive components, which are effectively resistant to metallo-beta-lactamase (MβL), were studied in the alcohol extract of Schisandra chinensis (Turcz.) Baill. by metalloenzyme-immobilized affinity chromatography. Taking bizinc metalloenzyme beta-lactamase II from Bacillus cereus (Bc II) and monozinc metalloenzyme CphA from aeromonas hydrophila (CphA) as examples, we studied the feasibility of this scheme based on the construction of metalloenzyme-immobilized chromatographic model. It was found that the Bc II- and CphA-immobilized chromatographic column could be used not only to explore the interaction between the MβL and their specific ligands, but also to screen the bioactive components from traditional Chinese medicine. The Bc II-and CphA-immobilized columns were used to screen the bioactive components from the alcohol extract of Schisandra chinensis (Turcz.) Baill. Time-of-flight tandem mass spectrometry analysis and molecular docking revealed that isobutyl 3-O-sulfo-β-D-galactopyranoside is the effective bioactive components that could bind with metalloenzyme Bc II. It is believed that our current work may provide a methodological reference for screening MβL inhibitors from traditional Chinese medicine.

Recent trends in sorbents for bioaffinity chromatography

Isolation or enrichment of biological molecules from complex biological samples is mostly a prerequisite in proteomics, genomics, and glycomics. Different techniques have been used to advance the efficiency of the purification of biological molecules. Bioaffinity chromatography is one of the most powerful technique that plays an important role in the isolation of target biological molecules by the specific interactions with ligands that are immobilized on different support materials. This review examines the recent developments in bioaffinity chromatography particularly over the past 5 years in the literature. Also properties of supports, immobilization techniques, types of binding agents, and methods used in bioaffinity chromatography applications are summarized.

Affinity chromatography: A review of trends and developments over the past 50 years

The field of affinity chromatography, which employs a biologically-related agent as the stationary phase, has seen significant growth since the modern era of this method began in 1968. This review examines the major developments and trends that have occurred in this technique over the past five decades. The basic principles and history of this area are first discussed. This is followed by an overview of the various supports, immobilization strategies, and types of binding agents that have been used in this field. The general types of applications and fields of use that have appeared for affinity chromatography are also considered. A survey of the literature is used to identify major trends in these topics and important areas of use for affinity chromatography in the separation, analysis, or characterization of chemicals and biochemicals.

Kinetic Analysis by Affinity Chromatography

Important information on chemical processes in living systems can be obtained by the rates at which these biological interactions occur. This review will discuss several techniques based on traditional and high-performance affinity chromatography that may be used to examine the kinetics of biological reactions. These methods include band-broadening measurements, techniques for peak fitting, split-peak analysis, peak decay studies, and ultrafast affinity extraction. The general principles and theory of each method, as applied to the determination of rate constants, will be discussed. The applications of each approach, along with its advantages and limitations, will also be considered.

Development of boronic acid-functionalized mesoporous silica-coated core/shell magnetic microspheres with large pores for endotoxin removal

Endotoxins are found almost everywhere and possess high toxicity in vivo and in vitro. Here we design a novel boronate affinity material, called boronic acid-functionalized mesoporous silica-coated core/shell magnetic microspheres (Fe₃O₄@nSiO₂@mSiO₂-BA) with large pores (pore size > 20 nm) based on the chemical structure and physical properties of endotoxins, for facile and highly efficient removal of endotoxins. Dual modes for endotoxin removal were proposed and confirmed in this work: the endotoxin aggregates with size < 20 nm were bound with boronic acid ligands chemically modified on the inner and outer surface of the large pores of Fe₃O₄@nSiO₂@mSiO₂-BA microspheres; while the larger endotoxin micelles (size >20 nm) were absorbed on the outer surface of the prepared material based on boronate affinity. Transmission electron microscopy (TEM), X-ray diffraction (XRD), nitrogen adsorption/desorption isotherms and Fourier transform infrared (FT-IR) spectroscopy confirm that Fe₃O₄@nSiO₂@mSiO₂-BA microspheres possess core/shell structure, uniform diameter (520 nm), high surface area (205.57 m²/g), large mesopores (21.8 nm) and boronic acid ligands. The purification procedures of Fe₃O₄@nSiO₂@mSiO₂-BA microspheres for endotoxin were optimized, and 50 mM NH₄HCO₃ (pH 8.0) and 0.05 M fructose were selected as loading/washing, elution buffers, respectively. The binding capacity of Fe₃O₄@nSiO₂@mSiO₂-BA microspheres for endotoxin was calculated to be 60.84 EU/g under the optimized conditions. Finally, the established analytical method was applied to remove endotoxins from plasmid DNA. After endotoxin removal, the endotoxin content in plasmid DNA was reduced from 0.0026 to 0.0006 EU/mL for two-fold concentration, and from 0.0088 to 0.0022 EU/mL for five-fold concentration after binding, respectively. Additional advantages of the prepared boronate affinity material include excellent stability, reusability/repeatability, and low cost. Boronate affinity materials with large pores could thus prove to be powerful adsorbents for endotoxin removal and the potential applications in the aspects of biological research, pharmaceutical industry, and life health.

Affinity monolith chromatography: A review of general principles and applications

Affinity monolith chromatography, or AMC, is a liquid chromatographic method in which the support is a monolith and the stationary phase is a biological-binding agent or related mimic. AMC has become popular for the isolation of biochemicals, for the measurement of various analytes, and for studying biological interactions. This review will examine the principles and applications of AMC. The materials that have been used to prepare AMC columns will be discussed, which have included various organic polymers, silica, agarose, and cryogels. Immobilization schemes that have been used in AMC will also be considered. Various binding agents and applications that have been reported for AMC will then be described. These applications will include the use of AMC for bioaffinity chromatography, immunoaffinity chromatography, dye-ligand affinity chromatography, and immobilized metal-ion affinity chromatography. The use of AMC with chiral stationary phases and as a tool to characterize biological interactions will also be examined.

Chromatographic studies of drug interactions with alpha1-acid glycoprotein by ultrafast affinity extraction and peak profiling

Interactions with serum proteins such as alpha₁-acid glycoprotein (AGP) can have a significant effect on the behavior and pharmacokinetics of drugs. Ultrafast affinity extraction and peak profiling were used with AGP microcolumns to examine these processes for several model drugs (i.e., chlorpromazine, disopyramide, imipramine, lidocaine, propranolol and verapamil). The association equilibrium constants measured for these drugs with soluble AGP by ultrafast affinity extraction were in the general range of 10⁴-10⁶M^-1 at pH 7.4 and 37°C and gave good agreement with literature values. Some of these values were dependent on the relative drug and protein concentrations that were present when using a single-site binding model; these results suggested a more complex mixed-mode interaction was actually present, which was also then used to analyze the data. The apparent dissociation rate constants that were obtained by ultrafast affinity extraction when using a single-site model varied from 0.14 to 7.0s^-1 and were dependent on the relative drug and protein concentrations. Lower apparent dissociation rate constants were obtained by this approach as the relative amount of drug versus protein was decreased, with the results approaching those measured by peak profiling at low drug concentrations. This information should be useful in better understanding how these and other drugs interact with AGP in the circulation. In addition, the chromatographic approaches that were optimized and used in this report to examine these systems can be adapted for the analysis of other solute-protein interactions of biomedical interest.

Immobilization of NTPDase-1 from Trypanosoma cruzi and Development of an Online Label-Free Assay

The use of IMERs (Immobilized Enzyme Reactors) as a stationary phase coupled to high performance chromatographic systems is an interesting approach in the screening of new ligands. In addition, IMERs offer many advantages over techniques that employ enzymes in solution. The enzyme nucleoside triphosphate diphosphohydrolase (NTPDase-1) from Trypanosoma cruzi acts as a pathogen infection facilitator, so it is a good target in the search for inhibitors. In this paper, immobilization of NTPDase-1 afforded ICERs (Immobilized Capillary Enzyme Reactors). A liquid chromatography method was developed and validated to monitor the ICER activity. The conditions for the application of these bioreactors were investigated, and excellent results were obtained. The enzyme was successfully immobilized, as attested by the catalytic activity detected in the TcNTPDase-1-ICER chromatographic system. Kinetic studies on the substrate ATP gave K_M of 0.317 ± 0.044 mmol·L^-1, which still presented high affinity compared to in solution. Besides that, the ICER was stable for 32 days, enough time to investigate samples of possible inhibitors, including especially the compound Suramin, that inhibited 51% the enzyme activity at 100 µmol·L^-1, which is in accordance with the data for the enzyme in solution.

Analytical methods for kinetic studies of biological interactions: A review

The rates at which biological interactions occur can provide important information concerning the mechanism and behavior of these processes in living systems. This review discusses several analytical methods that can be used to examine the kinetics of biological interactions. These techniques include common or traditional methods such as stopped-flow analysis and surface plasmon resonance spectroscopy, as well as alternative methods based on affinity chromatography and capillary electrophoresis. The general principles and theory behind these approaches are examined, and it is shown how each technique can be utilized to provide information on the kinetics of biological interactions. Examples of applications are also given for each method. In addition, a discussion is provided on the relative advantages or potential limitations of each technique regarding its use in kinetic studies.

3,3'-Diamino-N-methyldipropylamine as a versatile affinity ligand

Currently, in biomedicine and biotechnology fields, there is a growing need to develop and produce biomolecules with a high degree of purity. To accomplish this goal, new purification methods are being developed looking for higher performance, efficiency, selectivity, and cost-effectiveness. Affinity chromatography is considered one of the most highly selective methods for biomolecules purification. The purpose of this work is to explore a new type of a structurally simple ligand immobilized onto an agarose matrix to be used in affinity chromatography. The ligand in this study, 3,3'-diamino-N-methyldipropylamine has shown low toxicity and low cost of preparation. Moreover, the ability of the ligand to be used in affinity chromatography to purify proteins and nucleic acids was verified. An increasing sodium chloride gradient, using salt concentrations up to 500 mM, was suitable to accomplish the purification of these biomolecules, meaning that the new support allows the recovery of target biomolecules under mild conditions. Thus, the 3,3'-diamino-N-methyldipropylamine ligand is shown to be a useful and versatile tool in chromatographic experiments, with very good results either for proteins or supercoiled plasmid isoform purification.

Analysis of biomolecular interactions using affinity microcolumns: a review

Affinity chromatography has become an important tool for characterizing biomolecular interactions. The use of affinity microcolumns, which contain immobilized binding agents and have volumes in the mid-to-low microliter range, has received particular attention in recent years. Potential advantages of affinity microcolumns include the many analysis and detection formats that can be used with these columns, as well as the need for only small amounts of supports and immobilized binding agents. This review examines how affinity microcolumns have been used to examine biomolecular interactions. Both capillary-based microcolumns and short microcolumns are considered. The use of affinity microcolumns with zonal elution and frontal analysis methods are discussed. The techniques of peak decay analysis, ultrafast affinity extraction, split-peak analysis, and band-broadening studies are also explored. The principles of these methods are examined and various applications are provided to illustrate the use of these methods with affinity microcolumns. It is shown how these techniques can be utilized to provide information on the binding strength and kinetics of an interaction, as well as on the number and types of binding sites. It is further demonstrated how information on competition or displacement effects can be obtained by these methods.

Kinetic approach for the purification of nucleotides with magnetic separation

The isolation of β-nicotinamide adenine dinucleotide is of great importance since it is widely used in different scientific and technologic fields such as biofuel cells, sensor technology, and hydrogen production. In order to isolate β-nicotinamide adenine dinucleotide, first 3-aminophenyboronic acid functionalized magnetic nanoparticles were prepared to serve as a magnetic solid support and subsequently they were used for reversible adsorption/desorption of β-nicotinamide adenine dinucleotide in a batch fashion. The loading capacity of the 3-aminophenyboronic acid functionalized nanoparticles for β-nicotinamide adenine dinucleotide adsorption was 13.0 μmol/g. Adsorption kinetic and isotherm studies showed that the adsorption process followed a pseudo-second-order kinetic model and the experimental data can be represented using Langmuir isotherm model. The 3-aminophenyboronic acid functionalized magnetic nanoparticles were proposed as an alternative support for the β-nicotinamide adenine dinucleotide purification. The results elucidated the significance of magnetic separation as a fast, relatively simple, and low-cost technique. Furthermore, the magnetic supports can be reused at least five times for purification processes.

Affinity monolith chromatography: a review of principles and recent analytical applications

Affinity monolith chromatography (AMC) is a type of liquid chromatography that uses a monolithic support and a biologically related binding agent as a stationary phase. AMC is a powerful method for the selective separation, analysis, or study of specific target compounds in a sample. This review discusses the basic principles of AMC and recent developments and applications of this method, with particular emphasis being given to work that has appeared in the last 5 years. Various materials that have been used to prepare columns for AMC are examined, including organic monoliths, silica monoliths, agarose monoliths, and cryogels. These supports have been used in AMC for formats that have ranged from traditional columns to disks, microcolumns, and capillaries. Many binding agents have also been employed in AMC, such as antibodies, enzymes, proteins, lectins, immobilized metal ions, and dyes. Some applications that have been reported with these binding agents in AMC are bioaffinity chromatography, immunoaffinity chromatography or immunoextraction, immobilized-metal-ion affinity chromatography, dye-ligand affinity chromatography, chiral separations, and biointeraction studies. Examples are presented from fields that include analytical chemistry, pharmaceutical analysis, clinical testing, and biotechnology. Current trends and possible directions in AMC are also discussed.

Using lectins to harvest the plasma/serum glycoproteome

Aberrant protein glycosylation has been shown to be associated with disease processes and identification of disease-specific glycoproteins and glycosylation changes may serve as potential diagnostic and therapeutic biomarkers. However despite recent advances in proteomic-based biomarker discovery, this knowledge has not yet translated into an extensive mining of the glycoproteome for potential biomarkers. The major challenge for a comprehensive glycoproteomics analysis arises primarily from the enormous complexity and the large dynamic range in protein constituent in biological samples. Methods that specifically target glycoproteins are therefore necessary to facilitate their selective enrichment prior to their identification by MS-based analysis. The use of lectins, with selective affinities for specific carbohydrate epitopes, to enrich glycoprotein fractions coupled with modern MS, have greatly enhanced the identification of the glycoproteome. On account of their ability to specifically bind cell surface carbohydrates lectins have, during the recent past, found extensive applications in elucidation of the architecture and dynamics of cell surface carbohydrates, glycoconjugate purification, and structural characterization. Combined with complementary depletion and MS technologies, lectin affinity chromatography is becoming the most widely employed method of choice for biomarker discovery in cancer and other diseases.

Positively charged mini-protein Zbasic2 as a highly efficient silica binding module: opportunities for enzyme immobilization on unmodified silica supports

Silica is a highly attractive support material for protein immobilization in a wide range of biotechnological and biomedical-analytical applications. Without suitable derivatization, however, the silica surface is not generally usable for attachment of proteins. We show here that Z(basic2) (a three α-helix bundle mini-protein of 7 kDa size that exposes clustered positive charges from multiple arginine residues on one side) functions as highly efficient silica binding module (SBM), allowing chimeras of target protein with SBM to become very tightly attached to underivatized glass at physiological pH conditions. We used two enzymes, d-amino acid oxidase and sucrose phosphorylase, to demonstrate direct immobilization of Z(basic2) protein from complex biological samples with extremely high selectivity. Immobilized enzymes displayed full biological activity, suggesting that their binding to the glass surface had occurred in a preferred orientation via the SBM. We also show that charge complementarity was the main principle of affinity between SBM and glass surface, and Z(basic2) proteins were bound in a very strong, yet fully reversible manner, presumably through multipoint noncovalent interactions. Z(basic2) proteins were immobilized on porous glass in a loading of 30 mg protein/g support or higher, showing that attachment via the SBM combines excellent binding selectivity with a technically useful binding capacity. Therefore, Z(basic2) and silica constitute a fully orthogonal pair of binding module and insoluble support for oriented protein immobilization, and this opens up new opportunities for the application of silica-based materials in the development of supported heterogeneous biocatalysts.

Amine-functionalized SBA-15 with uniform morphology and well-defined mesostructure for highly sensitive chemosensors to detect formaldehyde vapor

Amine-functionalized SBA-15 with uniform morphology and well-defined mesostructure was prepared using a postgrafting route. The morphology, mesostructure, and functionality of the materials were characterized by scanning electron microscopy, transmission electron microscopy, small-angle X-ray scattering, nitrogen adsorption-desorption, Fourier transform infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy techniques. The results show that hexagonal lamelliform SBA-15 with a uniform particle size and short vertical channels plays two significant roles in uniformly dispersing amine-functionalizing groups and effectively adjusting the loadings of the functional groups within the mesopore channels. To confirm the potential application of the hybrids in gas sensors, using amine-functionalized SBA-15 as a sensing material and a quartz crystal microbalance as a transducer, a parts per billion level formaldehyde sensor with high sensitivity (response time about 11 s, recovery time about 15 s) and good chemoselectivity was achieved. This material holds great potential in the area of rapid, sensitive, and highly convenient formaldehyde detection.

Pharmaceutical and biomedical applications of affinity chromatography: recent trends and developments

Affinity chromatography is a separation technique that has become increasingly important in work with biological samples and pharmaceutical agents. This method is based on the use of a biologically related agent as a stationary phase to selectively retain analytes or to study biological interactions. This review discusses the basic principles behind affinity chromatography and examines recent developments that have occurred in the use of this method for biomedical and pharmaceutical analysis. Techniques based on traditional affinity supports are discussed, but an emphasis is placed on methods in which affinity columns are used as part of HPLC systems or in combination with other analytical methods. General formats for affinity chromatography that are considered include step elution schemes, weak affinity chromatography, affinity extraction and affinity depletion. Specific separation techniques that are examined include lectin affinity chromatography, boronate affinity chromatography, immunoaffinity chromatography, and immobilized metal ion affinity chromatography. Approaches for the study of biological interactions by affinity chromatography are also presented, such as the measurement of equilibrium constants, rate constants, or competition and displacement effects. In addition, related developments in the use of immobilized enzyme reactors, molecularly imprinted polymers, dye ligands and aptamers are briefly considered.

A quantitative LC-MS/MS method for comparative analysis of capture-antibody affinity toward protein antigens

A mass spectrometry-based antibody selection procedure was developed to evaluate optimal 'capture' monoclonal antibodies that can be used in a variety of analytical measurement applications. The isotope-dilution liquid chromatography-tandem mass spectrometry (ID LC-MS/MS) methodology is based on the use of multiple-reaction monitoring of tryptic peptide fragments derived from protein antigens. A panel of monoclonal antibodies (mAb) was evaluated based on a quantitative determination of relative binding affinity to human cardiac troponin I following immunoprecipitation. Dissociation constants (K(d)) were determined for 'bound mAb-antigen' vs. 'unbound antigen' using non-linear regression analysis. Relative quantification of both antigen and antibody was based on the use of stable isotope-labeled synthetic peptides as internal standards. Optimal 'capture' mAbs were determined through evaluation of relative K(d) constants of all monitored peptide transitions. A panel of six pre-screened candidate capture mAbs was concluded to consist of two subsets of mAbs, each with statistically equivalent K(d) constants as determined using NIST Standard Reference Material (SRM) 2921 - Human Cardiac Troponin Complex. This ID LC-MS/MS method is shown to be capable of quantitatively differentiating mAbs based on relative binding affinities. Selection of optimal capture mAbs can be applied toward a number of analytical applications which require metrological traceability and unbiased quantification.

CHROMATOGRAPHIC ANALYSIS OF DRUG INTERACTIONS IN THE SERUM PROTEOME

The binding of drugs with serum proteins and binding agents such as human serum albumin, α1-acid glycoprotein, and lipoproteins is an important process in determining the activity and fate of many pharmaceuticals in the body. A variety of techniques have been used to study drug interactions with serum proteins, but there is still a need for faster or better methods for such work. High-performance liquid chromatography (HPLC) is one tool that has been utilized in many formats for these types of measurements. Advantages of using HPLC for this application include its speed and precision, its ability to be automated, its good limits of detection, and its compatibility with a wide range of assay formats and detectors. This review will discuss various approaches in which HPLC can be employed for the study of drug-protein interactions. These techniques include the use of soluble proteins in zonal elution and frontal analysis methods or vacancy techniques such as the Hummel-Dreyer method. Zonal elution and frontal analysis methods that make use of immobilized proteins and high-performance affinity chromatography will also be presented. A variety of applications will be examined, ranging from the determination of free drug fractions to the measurement of the strength or rate of a drug-protein interaction. Newer developments that will be discussed include recent work in the creation of novel mathematical approaches for HPLC studies of drug-protein binding, the use of HPLC methods for the high-throughput screening of drug-protein binding, and the creation and use of affinity monoliths or affinity microcolumns for examining drug-protein systems.

Immunoaffinity chromatography: an introduction to applications and recent developments

Immunoaffinity chromatography (IAC) combines the use of LC with the specific binding of antibodies or related agents. The resulting method can be used in assays for a particular target or for purification and concentration of analytes prior to further examination by another technique. This review discusses the history and principles of IAC and the various formats that can be used with this method. An overview is given of the general properties of antibodies and of antibody-production methods. The supports and immobilization methods used with antibodies in IAC and the selection of application and elution conditions for IAC are also discussed. Several applications of IAC are considered, including its use in purification, immunodepletion, direct sample analysis, chromatographic immunoassays and combined analysis methods. Recent developments include the use of IAC with CE or MS, ultrafast immunoextraction methods and the use of immunoaffinity columns in microanalytical systems.

Bioaffinity chromatography on monolithic supports

Affinity chromatography on monolithic supports is a powerful analytical chemical platform because it allows for fast analyses, small sample volumes, strong enrichment of trace biomarkers and applications in microchips. In this review, the recent research using monolithic materials in the field of bioaffinity chromatography (including immunochromatography) is summarized and discussed. After giving an introduction into affinity chromatography, information on different biomolecules (antibodies, enzymes, lectins, aptamers) that can act as ligands in bioaffinity chromatography is presented. Subsequently, the history of monoliths, their advantages, preparation and formats (disks, capillaries and microchips) as well as ligand immobilization techniques are mentioned. Finally, analytical and preparative applications of bioaffinity chromatography on monoliths are presented. During the last four years 37 papers appeared. Protein A and G are still most often used as ligands for the enrichment of immunoglobulins. Antibodies and lectins remain popular for the analysis of mainly smaller molecules and saccharides, respectively. The highly porous cryogels modified with ligands are applied for the sorting of different cells or bacteria. New is the application of aptamers and phages as ligands on monoliths. Convective interaction media (epoxy CIM disks) are currently the most used format in monolithic bioaffinity chromatography.

Analysis of drug-protein binding by ultrafast affinity chromatography using immobilized human serum albumin

Human serum albumin (HSA) was explored for use as a stationary phase and ligand in affinity microcolumns for the ultrafast extraction of free drug fractions and the use of this information for the analysis of drug-protein binding. Warfarin, imipramine, and ibuprofen were used as model analytes in this study. It was found that greater than 95% extraction of all these drugs could be achieved in as little as 250 ms on HSA microcolumns. The retained drug fraction was then eluted from the same column under isocratic conditions, giving elution in less than 40 s when working at 4.5 mL/min. The chromatographic behavior of this system gave a good fit with that predicted by computer simulations based on a reversible, saturable model for the binding of an injected drug with immobilized HSA. The free fractions measured by this method were found to be comparable to those determined by ultrafiltration, and equilibrium constants estimated by this approach gave good agreement with literature values. Advantages of this method include its speed and the relatively low cost of microcolumns that contain HSA. The ability of HSA to bind many types of drugs also creates the possibility of using the same affinity microcolumn to study and measure the free fractions for a variety of pharmaceutical agents. These properties make this technique appealing for use in drug-binding studies and in the high-throughput screening of new drug candidates.

Biointeraction analysis by high-performance affinity chromatography: Kinetic studies of immobilized antibodies

A system based on high-performance affinity chromatography was developed for characterizing the binding, elution and regeneration kinetics of immobilized antibodies and immunoaffinity supports. This information was provided by using a combination of frontal analysis, split-peak analysis and peak decay analysis to determine the rate constants for antibody-antigen interactions under typical sample application and elution conditions. This technique was tested using immunoaffinity supports that contained monoclonal antibodies for 2,4-dichlorophenoxyacetic acid (2,4-D). Association equilibrium constants measured by frontal analysis for 2,4-D and related compounds with the immobilized antibodies were 1.7-12x10(6)M(-1) at pH 7.0 and 25 degrees C. Split-peak analysis gave association rate constants of 1.4-12x10(5)M(-1)s(-1) and calculated dissociation rate constants of 0.01-0.4s(-1) under the application conditions. Elution at pH 2.5 for the analytes from the antibodies was examined by peak decay analysis and gave dissociation rate constants of 0.056-0.17s(-1). A comparison of frontal analysis results after various periods of column regeneration allowed the rate of antibody regeneration to be examined, with the results giving a first-order regeneration rate constant of 2.4x10(-4)s(-1). This combined approach and the information it provides should be useful in the design and optimization of immunoaffinity chromatography and other analytical methods that employ immobilized antibodies. The methods described are not limited to the particular analytes and antibodies employed in this study but should be useful in characterizing other targets, ligands and supports.