Determination of impurities and counterions of pharmaceuticals by capillary electromigration methods

Antimalarial analysis of pharmaceutical formulations and biological samples by capillary electrophoresis: the state of the art and applications

Malaria is a serious public health problem, being an endemic disease in 84 countries, mainly in Africa. This review explores the application of capillary electrophoresis (CE) techniques for analyzing antimalarial drugs, highlighting methods from 2000 to 2023 for the analysis of pharmaceutical formulations and human biological samples. The versatility, selectivity, high efficiency, cost-effectiveness, and high analytical frequency of CE techniques have become attractive choices for pharmaceutical analysis, focusing on quality control and impurity analysis applications. The evolution of achiral and chiral electromigration methods has been described based on the features of each mode of separation: capillary zone electrophoresis (CZE), micellar electrokinetic chromatography, microemulsion electrokinetic chromatography, and capillary electrochromatography. As expected, CZE is reported in most articles owing to its compatibility with drug properties and separation mode. However, it is necessary to perform other separation modes for a few drugs that are present in neutral form. After exhaustive research using different databases and statistical analyses, 27 articles using CE techniques for antimalarial drug analysis were found and are mentioned in this review.

In silico prediction and a systematic toxicology-based in vivo investigation uncovering the mechanism of aquatic toxicity caused by beta-lactam antibiotics

Recently, beta-lactam antibiotics have gained attention as significant contributors to public health and environmental issues due to their potential toxicity. Our study employed machine learning to develop a model for assessing the aquatic toxicity of beta-lactam antibiotics on zebrafish. Notably, aztreonam (AZT), a synthetic monobactam and a subclass of beta-lactam antibiotics, demonstrated developmental effects in zebrafish embryos comparable to cephalosporins, indicating a potential for toxicity. Using a systems toxicology-based approach, we identified apoptosis and metabolic disorders as the primary pathways affected by AZT and its impurity F exposure. During the administration of monobactams, we noted that ctsbb, nos2a, and dgat2, genes associated with apoptosis and the metabolic pathway, exhibited significant differential expression. Molecular docking studies were conducted to ascertain the binding affinity between monobactam compounds and their potential targets-Ctsbb, Nos2a, and Dgat2. Furthermore, our research revealed that monobactams influence pre-mRNA alternative splicing, resulting in disruptions in the expression of genes involved in hair cells, brain, spinal cord, and fin regeneration (e.g., krt4, krt5, krt17, cyt1). Notably, we observed a correlation between the levels of rpl3 and rps7 genes, both important ribosomal proteins, and the detected alternative splicing events. Overall, this study enhances our understanding of the toxicity of beta-lactam antibiotics in zebrafish by demonstrating the developmental effects of monobactams and uncovering the underlying mechanisms at the molecular level. It also identifies potential targets for further investigation into the mechanisms of toxicity and provides valuable insights for early assessment of biological toxicity associated with antibiotic pollutants.

Recent developments in capillary and microchip electroseparations of peptides (2021-mid-2023)

This review article brings a comprehensive survey of developments and applications of high-performance capillary and microchip electromigration methods (zone electrophoresis in a free solution or in sieving media, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, micropreparation, and physicochemical characterization of peptides in the period from 2021 up to ca. the middle of 2023. Progress in the study of electromigration properties of peptides and various aspects of their analysis, such as sample preparation, adsorption suppression, electroosmotic flow regulation, and detection, are presented. New developments in the particular capillary electromigration methods are demonstrated, and several types of their applications are reported. They cover qualitative and quantitative analysis of synthetic or isolated peptides and determination of peptides in complex biomatrices, peptide profiling of biofluids and tissues, and monitoring of chemical and enzymatic reactions and physicochemical changes of peptides. They include also amino acid and sequence analysis of peptides, peptide mapping of proteins, separation of stereoisomers of peptides, and their chiral analyses. In addition, micropreparative separations and physicochemical characterization of peptides and their interactions with other (bio)molecules by the above CE methods are described.

Capillary electrophoresis in the analysis of therapeutic peptides-A review

Therapeutic peptides are a growing class of innovative drugs with high efficiency and a low risk of adverse effects. These biomolecules fall within the molecular mass range between that of small molecules and proteins. However, their inherent instability and potential for degradation underscore the importance of reliable and effective analytical methods for pharmaceutical quality control, therapeutic drug monitoring, and compliance testing. Liquid chromatography-mass spectrometry (LC-MS) has long time been the "gold standard" conventional method for peptide analysis, but capillary electrophoresis (CE) is increasingly being recognized as a complementary and, in some cases, superior, highly efficient, green, and cost-effective alternative technique. CE can separate peptides composed of different amino acids owing to differences in their net charge and size, determining their migration behavior in an electric field. This review provides a comprehensive overview of therapeutic peptides that have been used in the clinical environment for the last 25 years. It describes the properties, classification, current trends in development, and clinical use of therapeutic peptides. From the analytical point of view, it discusses the challenges associated with the analysis of therapeutic peptides in pharmaceutical and biological matrices, as well as the evaluation of CE as a whole and the comparison with LC methods. The article also highlights the use of microchip electrophoresis, nonaqueous CE, and nonconventional hydrodynamically closed CE systems and their applications. Overall, the article emphasizes the importance of developing new CE-based analytical methods to ensure the high quality, safety, and efficacy of therapeutic peptides in clinical practice.

Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-β-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21-26 mM phosphate-borate buffer pH 9.50-9.77; 65.0 mM sodium dodecyl sulfate; 0.25-1.29% v/v n-butanol; 21-26 mM dimethyl-β-cyclodextrin; temperature, 22 °C; voltage, 23-29 kV. The method was validated and applied to ampoules drug products.

A full scale tracing study of "ghost peaks" encountered in impurity analysis of budesonide based on experimental operation inspection-LC/MS fingerprint- mechanism based stress studies integrated strategy

Budesonide is an active pharmaceutical ingredient used in various dosage forms of finished products for the treatment of asthma. During the process of drug development, unbiased analysis of related substances is of utmost significance for both pharmaceutical research and quality control purposes. In this work, official method documented in the United States Pharmacopoeia was selected to determine the related substances of budesonide considering the pros and cons of critical chromatographic parameters, compared to the European Pharmacopoeia. In doing so, several unpredictable interference peaks, namely "ghost peaks", were observed occasionally during analysis. A strategy which integrated information derived from experimental operation inspection, LC/MS fingerprint analysis and mechanism based stress studies was then proposed for comprehensively and quickly exploring those non-degradable and degradable peaks. Some ghost peaks were found to originate from nylon syringe filter, illumination and alkali borosilicate glass HPLC vials. Besides, degradation pathways under alkaline conditions were also unravelled through LC-MS qualitative analysis. Overall, an optimization of the analytical methodology based on the United States Pharmacopoeia for its application in impurity analysis of budesonide and corresponding formulations was carried out with design of experiments, by which "ghost peaks" could be suppressed or prevented. The results obtained herein are not only crucial to studies on budesonide's stability or degradation kinetics but also contribute to clarify the impurity research of other drugs. This article is protected by copyright. All rights reserved.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Determination of 13-cis-Retinoic Acid and Its Metabolites in Plasma by Micellar Electrokinetic Chromatography Using Cyclodextrin-Assisted Sweeping for Sample Preconcentration

The online preconcentration technique, cyclodextrin-assisted sweeping (CD-sweeping), coupled with micellar electrokinetic chromatography (MEKC) was established to determine 13-cis-retinoic acid (13-cis-RA), all-trans-retinoic acid (all-trans-RA) and 4-oxo-13-cis-retinoic acid (4-oxo-13-cis-RA) in human plasma. A CD-sweeping buffer (45 mM borate (pH 9.2), containing 80 mM sodium dodecyl sulfate (SDS) and 22 mM hydroxypropyl β-CD (HP-β-CD) was introduced into the capillary and, then, the sample dissolved in 70 mM borate (pH 9.2): methanol = 9:1 (v/v) was injected into capillary by pressure. The separation voltage was 23 kV. Compared to the conventional cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method, the new technique achieved 224-257-fold sensitivity enrichment of analytes. The limits of detection of 13-cis-RA, all-trans-RA were 1 ng/mL, whereas that of 4-oxo-13-cis-RA was 25 ng/mL in plasma. The linear ranges of 13-cis-RA, all-trans-RA were between 15 and 1000 ng/mL, whereas that of 4-oxo-13-cis-RA was between 75 and 1500 ng/mL. The coefficient of correlation between the concentration of analytes and peak area ratio of analytes and internal standard (2, 4-dihydroxy-benzophenone) for intra-day (n = 3) and inter-day (n = 5) analyses were both greater than 0.999. The optimized experimental conditions were successfully applied to determine 13-cis-retinoic acid and its metabolites in plasma samples from a patient during the administration of 13-cis-RA for treating acne.

Application of capillary electrophoresis-nano-electrospray ionization-mass spectrometry for the determination of N-nitrosodimethylamine in pharmaceuticals

After a presence of highly hepatotoxic and potentially carcinogenic N-nitrosodimethylamine was detected in certain lots of sartan, ranitidine, metformin, and other pharmaceuticals, local regulatory authorities issued recalls of suspected products, and concerns of the pharmacotherapy safety were widely discussed. Since then, testing of a representative sample of each produced lot of these pharmaceuticals is required as a part of quality control processes. Hence, an interface-free CE-nanoESI system coupled with MS detection was employed for the development of a simple and economical method for quantitative detection of this contaminant in the valsartan drug substances and finished formulations used as model matrices. In this arrangement, a fused-silica capillary was used as both a separation column and a nanoESI emitter providing high ionization efficiency and sensitivity. The optimized procedure was found to have sufficient selectivity, linearity, accuracy, and precision. The established LOD and LOQ values were 0.3 and 1.0 ng/mL, respectively. The practical applicability of the method was tested by analyses of commercially available Valsacor^® tablets. The results obtained prove that the developed procedure represents a promising alternative to currently available GC- and LC-based methods. Furthermore, after an adjustment of the separation conditions, the CE-nanoESI/MS system can be conceptually used for the determination of NDMA in other suspected pharmaceuticals.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020)

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

A capillary electrophoresis method for the determination of the linagliptin enantiomeric impurity

Linagliptin is a highly specific, long-acting inhibitor that is used as an orally administrable agent for type-2 diabetes treatment. Because only the R-enantiomer is of clinical use, we developed a capillary electrophoresis method for the determination of the enantiomeric impurity of this compound. Carboxymethyl-β-cyclodextrin was selected as the chiral selector for the separation of linagliptin enantiomers. Design of experiments and desirability functions were used for the analytical optimization, which was focused on understanding and improving the electrophoretic process. The effects of significant parameters (background electrolyte concentration and pH, cyclodextrin concentration, temperature, and voltage) were thoroughly investigated. The complete separation of linagliptin and its enantiomeric impurity with baseline resolution was achieved within 10 min on an uncoated fused-silica capillary (50 μm inner diameter, 365 μm outer diameter, 64.5/56 cm in total/ effective length) maintained at 25°C, under an applied voltage of 28.0 kV. The background electrolyte contained 70 mM sodium acetate and 4.7 mM carboxymethyl-β-cyclodextrin, and the pH was adjusted to 6.10. The method was validated, and a limit of quantitation of 0.05% for the impurity was estimated.

Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review

Capillary electrophoresis represents a promising technique in the field of pharmaceutical analysis. The presented review provides a summary of capillary electrophoretic methods suitable for routine quality control analyses of small molecule drugs published since 2015. In total, more than 80 discussed methods are sorted into three main sections according to the applied electroseparation modes (capillary zone electrophoresis, electrokinetic chromatography, and micellar, microemulsion, and liposome-electrokinetic chromatography) and further subsections according to the applied detection techniques (UV, capacitively coupled contactless conductivity detection, and mass spectrometry). Key parameters of the procedures are summarized in four concise tables. The presented applications cover analyses of active pharmaceutical ingredients and their related substances such as degradation products or enantiomeric impurities. The contribution of reported results to the current knowledge of separation science and general aspects of the practical applications of capillary electrophoretic methods are also discussed.

Derivatization-free determination of aminoglycosides by CZE-UV in pharmaceutical formulations

Aminoglycosides are a relevant class of antibiotics widely used by medics and veterinaries. There are a variety of reasons that make their determination relevant, such as quality control, environment and food contamination assessment, drug-release studies, among others. The lack of a chromophore makes aminoglycoside spectrophotometric detection particularly challenging, often requiring derivatization. In this work, an indirect detection method, making use of imidazole as a probe, applying CZE was successfully tested. It did not require derivatization, which simplified the sample preparation. Suitable figures of merit were obtained; recoveries between 95 and 105%, adequate repeatability and precision, correlation coefficients (r) above 0.998, and limits of detection (LODs) of 3.2 and 11 mg/L for gentamicin and paromomycin, respectively. As a proof-of-concept, it was also applied in a simple controlled release experiment that was well fitted using the Hill equation.

Optimization of a sensitive and robust strategy for micellar electrokinetic chromatographic analysis of sofosbuvir in combination with its co-formulated hepatitis C antiviral drugs

Based on our previous work with "pseudostationary-ion exchanger sweeping", we use this strategy to develop a sensitive, reliable and robust method for the analysis of the newly-FDA approved hepatitis C antiviral drugs namely; sofosbuvir (SOV), daclatasvir (DAC), ledipasvir (LED) and velpatasvir (VEP) in their pure forms and co-formulated pharmaceutical dosage forms using micellar electrokinetic chromatography (MEKC) as a separation method. For the first time, a successful separation of all the investigated compounds was achieved in less than 8 min using a basic background electrolyte (BGE) composed of 25 mmol L^-1 SDS + 20% (v/v) ACN (acetonitrile) in 10 mmol L^-1 disodium tetraborate buffer (final apparent pH is 9.90). A special focus was given to optimize the composition of the sample matrix to maintain the solubility of the analytes within the sample zone while gaining additional benefits regarding analyte zone focusing. It was found that replacing phosphoric acid (as a sample matrix) with a zwitterionic/isoelectric buffering compound (L-glutamic acid) has a substantial positive impact on the obtained enrichment efficiency. The interplay of other enrichment principles such as the retention factor gradient effect (RFGE) is also discussed. A full validation study is performed based on the pharmacopeial and ICH guidelines. The obtained limits of detection and quantitation are as low as 0.63 and 1.3 μg mL^-1; respectively for SOV and DAC and 1.3 and 2.5 μg mL^-1; respectively for LED and VEP using UV-DAD as a detection method. The selectivity of the developed method for determination of the studied compounds in their pharmaceutical dosage forms or in the presence of ribavirin (RIB) or elbasvir (ELB), which are other prescribed medications in the treatment regimen of patients with hepatitis C virus infection, is demonstrated. It is shown that with acidic sample matrix and basic BGE, an efficient and precise approach was designed in which analyte adsorption on the capillary wall was minimized while keeping repeatable peak height, peak area and migration time together with the highest possible enrichment efficiency.

Capillary electrophoresis for the investigation of two novel aminoalkanol derivatives of 1,7-diethyl-8,9-diphenyl-4-azatricyclo[5.2.1.02,6] dec-8-ene-3,5,10-trione as potential anticancer drugs in water solution and serum

A simple, rapid, capillary zone electrophoresis method was developed and validated for the analysis of two novel aminoalkanol derivatives (I) and (II) of 1,7-diethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0^2,6 ]dec-8-ene-3,5,10-trione, which were found in earlier studies as potential anticancer drugs. Samples were analyzed to demonstrate the specificity and stability indicating ability of the developed method. The samples were extracted using n-hexane-ethyl acetate mixture in the ratio of 90:10. Electrophoretic separation was performed on a eCAP fused silica capillary (37 cm length, 50 µm inside diameter) with a 50 mM tetraborate buffer as a background electrolyte adjusted to pH = 2.5. The separation time of (I) and (II) was achieved within 7 min. In addition, analysis of the two compounds in the serum was conducted. Limits of detection of (I) and (II) by UV absorbance at 200 nm were achieved in the range of 87.4-92.1 ng/mL. The sufficient recovery was observed in the range of 90.3-99.8%. The quantification limits for the compounds (I) and (II) were in the range of 279.71-291.03 ng/mL, respectively. The method has been successfully applied to the analysis of compounds (I) and (II) in serum samples.

Application of the Principles of Green Chemistry for the Development of a New and Sensitive Method for Analysis of Ertapenem Sodium by Capillary Electrophoresis

An innovative method is validated for the analysis of ertapenem sodium by capillary electrophoresis using potassium phosphate buffer 10 mM pH 7 and 15 kV voltage, in the concentration range of 70 to 120 μg mL⁻¹. Ertapenem had a migration time of 3.15 minutes and the linearity curve was y = 2281.7 x - 24495 with a R² = 0.9994. Thus, we propose a routine analysis method that meets the principles of green analytical chemistry for the routine analysis of ertapenem sodium by capillary electrophoresis.

Determination of the stereoisomers in aqueous medium and serum and validation studies of racemic aminoalkanol derivatives of 1,7-dimethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0(2,6) ]dec-8-ene-3,5,10-trione, potential new anticancer drugs, by capillary electrophoresis

A new method for the determination of the stereoisomers, in aqueous medium and serum, of the racemic aminoalkanol derivatives I and II of 1,7-dimethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0(2,6) ]dec-8-ene-3,5,10-trione, which were found in earlier studies to be potential anticancer drugs, was developed and validated. The optimized conditions included 25 mM phosphate buffer adjusted to pH 2.5, containing γ-cyclodextrin at a concentration of 5% m/v, as background electrolyte, an applied voltage of +10 kV, and a temperature of 25°C. Separations were carried out using a fused-silica capillary. The developed method of determining the enantiomers of compounds I(S), I(R) and II(S), II(R) was characterized by the following parameters: a detection time within 10.8 min, a detection limit in the range of 141.2-141.7 ng/mL using the UV absorption detection at 200 nm. Good linearity (R(2) = 0.9989-0.9998) was achieved within the range of concentrations studied. A very good extraction yield of 95.4-99.7% was achieved, and recoveries were carried out from both aqueous solutions and matrix serum. The repeatability of the method for peak areas with an accuracy of the determined concentrations of the analytes in the range of 1.43-1.89%, and limits of quantitation in the range of 432.4-436.3 ng/mL were achieved.

Recent developments in capillary and microchip electroseparations of peptides (2015-mid 2017)

The review brings a comprehensive overview of recent developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) to analysis, microscale isolation, purification, and physicochemical and biochemical characterization of peptides in the years 2015, 2016, and ca. up to the middle of 2017. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis (sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, and detection) are described. New developments in particular CE and CEC methods are presented and several types of their applications to peptide analysis are reported: qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC methods to provide important physicochemical characteristics of peptides are demonstrated.

Two Synthetic Methods for Preparation of Chiral Stationary Phases Using Crystalline Degradation Products of Vancomycin: Column Performance for Enantioseparation of Acidic and Basic Drugs

Two chiral stationary phases (CSPs) based on crystalline degradation products (CDPs) of vancomycin by using different synthetic methods were prepared and compared. Crystalline degradation products of vancomycin were produced by hydrolytic loss of ammonia from vancomycin molecules. Performances of two chiral columns prepared with these degradation products were investigated using several acidic and basic drugs as model analytes. Retention and resolution of these analytes on the prepared columns, as two main parameters, in enantioseparation were studied. The results demonstrated that the stationary phase preparation procedure has a significant effect on the column performance. The resolving powers of prepared columns for enantiomers resolution were changed with the variation in vancomycin-CDP coverage on the silica support. Elemental analysis was used to monitor the surface coverage of silica support by vancomycin-CDP. The results showed that both columns can be successfully applied to chiral separation studies.

Determination of the stereoisomeric impurities of sitafloxacin by capillary electrophoresis with dual chiral additives

Because of the bioactivity against the human topoisomerase II, the stereoisomeric impurities of sitafloxacin should be controlled in the process of manufactory. In the present work, a capillary electrophoresis (CE) method was developed and validated for simultaneous determination of three stereoisomeric impurities of sitafloxacin. The separation with high resolution not only for the separation of enantiomers, but also for the separation of diastereoisomers was achieved by using a background electrolyte composed of dual chiral selectors, namely γ-cyclodextrin (γ-CD) and Cu²⁺-d-phenylalanine (D-Phe) complex. The combination of two chiral selectors is indispensable to gain a high separation selectivity due to the cooperativity effect of different chiral discrimination modes: inclusion complexation (γ-CD) and ligand exchange (Cu²⁺-d-Phe). The concentrations of γ-CD, Cu²⁺ and D-Phe were found to be critical to the separation. Because two chiral selectors were involved in the enantiomer separation system, multiple factors and their interaction should be simultaneously optimized by using the response surface methodology (RSM) with a face centred central composite design (FCCD). The obtained optimized separation conditions were as follows: 15mmol/L dipotassium hydrogenphosphate solution (pH 4.5) containing 15mmol/L D-Phe, 20mmol/L CuSO₄ and 20mmol/L γ-CD, separation voltage 15kV. The method was then validated and the robustness of the method was tested. Under the optimized conditions, as low as 0.1% (m/m) stereoisomeric impurities of sitafloxacin can be determined by the method.

Fast determination of codeine, orphenadrine, promethazine, scopolamine, tramadol, and paracetamol in pharmaceutical formulations by capillary electrophoresis

Paracetamol is an active ingredient commonly found in pharmaceutical formulations in combination with one of the following compounds: codeine, orphenadrine, promethazine, scopolamine, and tramadol. In this work, we propose a unique analytical method for determination of these active ingredients in pharmaceutical samples. The method is based on capillary electrophoresis with capacitively coupled contactless conductivity detection. The separation was achieved on a fused silica capillary (50 cm total length, 40 cm effective length, and 50 μm id) using an optimized background electrolyte composed of 20 mmol/L β-alanine/4 mmol/L sodium chloride/4 μmol/L sodium hydroxide (pH 9.6). Each sample can be analyzed in a single run (≤2 min) and the limits of detection were 2.5, 0.62, 0.63, 2.5, 15, and 1.6 μmol/L for scopolamine, tramadol, orphenadrine, promethazine, codeine, and paracetamol, respectively. Recovery values for spiked samples were between 94 and 104%.

Use of various β-cyclodextrin derivatives as chiral selectors for the enantiomeric separation of ofloxacin and its five related substances by capillary electrophoresis

A capillary electrophoretic method for the enantioseparation of ofloxacin and its five related substances (potential impurities, indicated as impurities B-F) was developed using β-cyclodextrin derivatives as chiral selectors. To our knowledge, there are no previous studies about using capillary electrophoresis for the separation of impurities B-D. Six β-cyclodextrin derivatives including cationic (piperidine- and cyclohexylamine-), neutral (dimethyl- and hydroxypropyl-), and anionic (carboxymethyl- and sulfated-) β-cyclodextrin derivatives were tested and operational parameters such as buffer pH and concentration of β-cyclodextrin derivatives were investigated. The best resolutions were all obtained with anionic β-cyclodextrin derivatives: ofloxacin, impurities C-F could be best resolved with carboxymethyl-β-cyclodextrin at satisfactory resolutions of 8.27, 9.98, 5.92, 8.49 and 6.78, respectively, while for impurity B, a particularly impressive resolution value, up to 21.38, was observed using sulfated-β-cyclodextrin. The enhancement of enantioseparation observed for the tested analytes using anionic β-cyclodextrin derivatives might be due to some favorable interaction between selectors and analytes. Given the fact that the selection of chiral selector depends on the structures of analytes, with the help of structural similarities and differences of the analytes, the structure-separation relationship was further discussed.

Application of an Untargeted Chemometric Strategy in the Impurity Profiling of Pharmaceuticals: An Example of Amisulpride

The untargeted chemometric methodology for the impurity profiling of amisulpride pharmaceutical formulations was successfully applied and developed. For this purpose a fast, accurate and specific analytical method was elaborated with the use of ultra high pressure liquid chromatography coupled with high resolution hybrid electrospray ionization quadrupole time of flight mass spectrometer in a fast polarity switching mode. All the obtained chromatographic profiles were aligned and a multivariate chemometric analysis including principal component analysis and partial least square (PLS) was performed. The developed PLS-DA pattern recognition model allowed the identification of all the analyzed pharmaceutical formulations of amisulpride as well as their manufacturers. Additionally, six impurities of amisulpride were identified by the use of MS/MS fragmentation and one of them was found as the main impurity (Imp-1) and can be regarded as the primary impurity "marker" for the analyzed formulations. Furthermore, one new impurity of amisulpride was found and its chemical structure was proposed (4-amino-5-(ethylsulfinyl)-2-methoxy-N-[(1-ethylpyrrolidin-2-yl)methyl]benzamide).

Capillary Electrophoresis Separation of Monoclonal Antibody Isoforms Using a Neutral Capillary

Biotherapeutic proteins, such as monoclonal antibodies (mAbs), are feasible alternatives for the treatment of chronic-degenerative diseases. The biological activity of these proteins depends on their physicochemical properties. The use of high-performance techniques like chromatography and capillary electrophoresis has been described for the analysis of physicochemical heterogeneity of mAbs. Nowadays, capillary zone electrophoresis (CZE) technique constitutes one of the most resolutive and sensitive assays for the analysis of biomolecules. Besides, the electro-driven separation in CZE is governed by extensive properties of matter and offers the advantage of analyzing proteins close to their native state. However, the successful implementation of this technique for routine analysis depends on the skills of the analyst at the critical steps during sample and system preparation. The purpose of this tutorial is to detail the steps to succeed in the CZE analysis of mAbs. Further, this protocol can be used for the development and improvement of skills of the personnel involved in protein analytical chemistry laboratories.

Dual-opposite injection capillary electrophoresis: Principles and misconceptions

Dual-opposite injection capillary electrophoresis (DOI-CE) is a separation technique that utilizes both ends of the capillary for sample introduction. The electroosmotic flow (EOF) is suppressed to allow all ions to reach the detector quickly. Depending on the individual electrophoretic mobilities of the analytes of interest and the effective length that each analyte travels to the detection window, the elution order of analytes in a DOI-CE separation can vary widely. This review discusses the principles, applications, and limitations of dual-opposite injection capillary electrophoresis. Common misconceptions regarding DOI-CE are clarified.

Analysis of proteins and peptides by electromigration methods in microchips

This review presents the developments and applications of microchip electromigration methods in the separation and analysis of peptides and proteins in the period 2011-mid-2016. The developments in sample preparation and preconcentration, microchannel material, and surface treatment are described. Separations by various microchip electromigration methods (zone electrophoresis in free and sieving media, affinity electrophoresis, isotachophoresis, isoelectric focusing, electrokinetic chromatography, and electrochromatography) are demonstrated. Advances in detection methods are reported and novel applications in the areas of proteomics and peptidomics, quality control of peptide and protein pharmaceuticals, analysis of proteins and peptides in biomatrices, and determination of physicochemical parameters are shown.