Simultaneous determination of florfenicol with its metabolite based on modified quick, easy, cheap, effective, rugged, and safe sample pretreatment and evaluation of their degradation behavior in agricultural soils

Study on the Direct and Indirect Photolysis of Antibacterial Florfenicol in Water Using DFT/TDDFT Method and Comparison of Its Reactivity with Hydroxyl Radical under the Effect of Metal Ions

Florfenicol (FLO) is a widely used antibacterial drug, which is often detected in the environment. In this paper, the photolysis mechanism of FLO in water was investigated using density functional theory (DFT) and time-dependent density functional theory (TDDFT). The focus of the study is to elucidate the direct photolysis mechanism of FLO in the water environment and the indirect photolysis of free radicals (·OH, ·NO3, and ·SO4-) as active species. The effect of metal ions Ca2+/Mg2+/Zn2+ on the indirect photolysis was also investigated. The results show that the direct photolysis of FLO involves C-C/C-N/C-S bond cleavage, the C5-S7 bond cleavage is most likely to occur, and the C17-C18 cleavage reaction is not easy to occur during the direct photodegradation of FLO. The indirect photolysis of FLO is more likely to occur in the environment than direct photolysis. The main indirect photolysis involves OH-addition, NO3-addition, and SO4-addition on benzene ring. The order of difficulty in the indirect photolysis with ·OH is C2 > C3 > C4 > C5 > C6 > C1, Ca2+ can promote the indirect photolysis with ·OH, and Mg2+/Zn2+ has a dual effect on the indirect photolysis with ·OH. In other words, Mg2+ and Zn2+ can inhibit or promote the indirect photolysis with ·OH. These studies provide important information for theoretical research on the environmental behavior and degradation mechanism of drug molecules.

Screening of Single-Stranded DNA Aptamer Specific for Florfenicol and Application in Detection of Food Safety

In this work, the single-stranded DNA (ssDNA) aptamers specific to florfenicol (FF) and having a high binding affinity were prepared using the magnetic bead-based systematic evolution of ligands by the exponential enrichment technique (MB-SELEX). After 10 rounds of the MB-SELEX screening, aptamers that can simultaneously recognize FF and its metabolite florfenicol amine (FFA) were obtained. The aptamer with the lowest dissociation constant (Kd) was truncated and optimized based on a secondary structure analysis. The optimal aptamer selected was Apt-14t, with a length of 43 nt, and its dissociation constant was 4.66 ± 0.75 nM, which was about 7 times higher than that of the full-length sequence. The potential binding sites and interactions with FF were demonstrated by molecular docking simulations. In addition, a colorimetric strategy for nanogold aptamers was constructed. The linear detection range of this method was 0.00128–500 ng/mL and the actual detection limit was 0.00128 ng/mL. Using this strategy to detect florfenicol in actual milk and eggs samples, the spiked recoveries were 88.9–123.1% and 84.0–112.2%, respectively, and the relative standard deviation was less than 5.6%, showing high accuracy.

Novel and simple analytical method for simultaneous determination of sulfonamide, quinolone, tetracycline, macrolide, and chloramphenicol antibiotics in soil

The multiclass determination of antibiotic residues in the soil is challenging because of its complex physicochemical properties. In this study, a simple analytical method was developed to simultaneously extract and determine 58 antibiotics from the soil. A novel acidity-regulated extraction-partition-concentration protocol was established for the simultaneous extraction of five classes (23 sulfonamides, 18 quinolones, five tetracyclines, eight macrolides, and four chloramphenicols) of antibiotics from the soil. Compared to traditional methods, the sample preparation efficiency was significantly improved by four times (45 min vs. 230 min) by optimizing the extraction method and omitting the time-consuming solid-phase extraction (SPE) procedure. The ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was optimized to determine the 58 antibiotics in a single run by applying positive/negative switching acquisition mode in less than 10 min with the baseline separation of sulfameter and sulfamethoxypyridazine. Suitable recoveries, ranging between 60 and 120%, were obtained for most antibiotics, with RSD <20%. The limits of quantification (LOQ) of the method were 2 μg/kg and 5 μg/kg. Thus, this study provides a simple, reliable, and economical method for accurately and rapidly determining a multiclass of antibiotics in the soil.

Single and ternary competitive adsorption-desorption and degradation of amphenicol antibiotics in three agricultural soils

The widespread usage of veterinary antibiotics results in antibiotic contamination and increases environmental risks. This study was evaluated the single and ternary competitive adsorption-desorption and degradation of three amphenicol antibiotics (AMs): chloramphenicol (CAP), thiamphenicol (TAP), and florfenicol (FF) in three agricultural soils. The adsorption capacity of amphenicol antibiotics in the soil was weak, and the K_f value was in the range of 0.15-3.59 μg^1-1/nL^1/n kg^-1. In the single adsorption-desorption experiment, the ranked order of adsorption capacity was TAP > FF > CAP. However, in the ternary competitive adsorption experiment, the order was changed to be CAP > FF > TAP. The degradation of AMs in soils was performed at various conditions. All AMs were vulnerable to microbial degradation in soils. A higher initial concentration would reduce the degradation rate and enhance the persistence of AMs in soil. The degradation of AMs was positively influenced by changes in soil moisture content and culture temperatures up to 30 °C and decreased at higher temperatures. An equation was used to predict the leachability of AMs in soils and assess their risk to the water environment. The weak adsorption capacity and poor persistence of FF indicated that it may have a strong effect on groundwater based on the equation. It is imperative to further assess the biological impacts of FF at environmentally relevant concentrations given its mobility and extensive use in the livestock industry.

Elucidating degradation mechanisms of florfenicol in soil by stable-isotope assisted nontarget screening

Antibiotics in soil environments are a growing concern. Identifying transformation products is key to elucidating degradation pathways and mechanisms of antibiotics and other organic micropollutants. The primary challenge of transformation product identification is the interference of matrices. In this study, stable-isotope assisted nontarget screening was used to identify biodegradation products of florfenicol in soil. A total of 74 candidates were prioritized from thousands of mass features observed by a tiered peak filtering approach. Moreover, with the support of in silico prediction tools, the structures of 12 transformation products were elucidated, and 9 of them were reported for the first time. A biodegradation map of florfenicol consisting of amide hydrolysis, dechlorination, dehydration, defluorination, and sulfone reduction was established based on these identified products. A total of 8 products were also found in 6 field soil samples with manure application. Because of the structural similarity to florfenicol, some transformation products might still keep antimicrobial activity toward a variety of bacterial species. The strategies demonstrated in this study provide a basis for efficient identification of transformation products of other organic micropollutants in a variety of environmental matrices. The results also shed light on the degradation mechanisms, risk assessments, and regulations of these compounds.

Pressurized Liquid Extraction (PLE) and QuEChERS evaluation for the analysis of antibiotics in agricultural soils

Vinasse, a liquid waste which originates from the production of ethanol fuel from sugarcane, has been widely used as soil amendment in Brazil. An important concern that arises from vinasse reuse is the dissemination of antibiotics to the environment through crop soils. This work evaluated the performance of Pressurized Liquid Extraction (PLE) and QuEChERS (quick, easy, cheap, effective, rugged and safe) to extract several multiple-class antibiotics, such as cephalosporins, fluoroquinolones, ionophores, lincosamides, macrolides, quinolones, streptogramin, sulfonamides, tetracyclines and others, from agricultural soils. The performance of several parameters was evaluated for both PLE and QuEChERS, such as the extraction temperature (for PLE), solvents composition, pH and the addition of EDTA. Both methods were able to extract most target antibiotics. However, QuEChERS showed higher recoveries for macrolides and nitroimidazoles, while PLE was more suitable for fluoroquinolones and ionophores (i.e. monensin). The use of citrate-phosphate buffer at pH 7.0, in combination with methanol for PLE and with acetonitrile for QuEChERS, provided the highest antibiotic recoveries for both methods. The use of EDTA did not increase antibiotic recovery rates for QuEChERS, while the temperature had almost no influence on the extraction efficiency in PLE.•Citrate-phosphate buffer at pH 7.0 provided higher antibiotic recoveries for QuEChERS and PLE.•The combination buffer-methanol provided higher recoveries for PLE.•QuEChERS and PLE methods were able to extract most of the target antibiotics.

Research and Technological Advances Regarding the Study of the Spread of Antimicrobial Resistance Genes and Antimicrobial-Resistant Bacteria Related to Animal Husbandry

The extensive use of antimicrobials in animal farms poses serious safety hazards to both the environment and public health, and this trend is likely to continue. Antimicrobial resistance genes (ARGs) are a class of emerging pollutants that are difficult to remove once introduced. Understanding the environmental transfer of antimicrobial-resistant bacteria (ARB) and ARGs is pivotal for creating control measures. In this review, we summarize the research progress on the spread and detection of ARB and ARG pollution related to animal husbandry. Molecular methods such as high-throughput sequencing have greatly enriched the information about ARB communities. However, it remains challenging to delineate mechanisms regarding ARG induction, transmission, and tempo-spatial changes in the whole process, from animal husbandry to multiple ecosystems. As a result, future research should be more focused on the mechanisms of ARG induction, transmission, and control. We also expect that future research will rely more heavily on metagenomic -analysis, metatranscriptomic sequencing, and multi-omics technologies

Development of a single-run analytical method for the detection of ten multiclass emerging contaminants in agricultural soil using an acetate-buffered QuEChERS method coupled with LC-MS/MS

This study was undertaken to develop and validate a single multiresidue method for the monitoring of ten multiclass emerging contaminants, viz. ceftiofur, clopidol, florfenicol, monensin, salinomycin, sulfamethazine, sulfathiazole, sulfamethoxazole, tiamulin, and tylosin in agricultural soil. Samples were extracted using an acetate-buffered, modified quick, easy, cheap, effective, rugged, and safe method followed by liquid chromatography with tandem mass spectrometric analysis in positive ion mode. Separation on an Eclipse Plus C₁₈ column was conducted in gradient elution mode using a mobile phase of methanol (A) and distilled water (B), each containing 0.1% formic acid and 5 mM ammonium formate. The linearity of the matrix-matched calibrations, expressed as determination coefficients, was good, with R² ≥ 0.9908. The limits of quantification were in the range 0.05-10 μg/kg. Blank soil samples spiked with 4 × and 20 × the limit of quantification provided recovery rates of 60.2-120.3% (except sulfamethoxazole spiked at 4 × the limit of quantification, which gave 131.9%) with a relative standard deviation < 13% (except clopidol spiked at 20 × the limit of quantification, which gave 25.2%). This method was successfully applied to the monitoring of 51 field-incurred agricultural loamy-sand soil samples collected from 17 provincial areas throughout the Korean Peninsula. The detected and quantified drugs were clopidol (≤ 4.8 μg/kg), sulfathiazole (≤ 7.7 μg/kg), sulfamethazine (≤ 6.6 μg/kg), tiamulin (≤ 10.0 μg/kg), and tylosin (≤ 5.3 μg/kg). The developed method is simple and versatile, and can be used to monitor various classes of veterinary drugs in soil.

Prevalence and Abundance of Florfenicol and Linezolid Resistance Genes in Soils Adjacent to Swine Feedlots

Florfenicol is extensively used in livestock to prevent or cure bacterial infections. However, it is not known whether the administration of florfenicol has resulted in the emergence and dissemination of florfenicol resistance genes (FRGs, including fexA, fexB, cfr, optrA, floR, and pexA) in microbial populations in surrounding farm environments. Here we collected soil samples for the detection of FRGs and the residue of florfenicol from six swine farms with the record of florfenicol usage. Quantitative polymerase chain reaction and metagenomic sequencing revealed a significantly higher relative abundance of FRGs in the soils adjacent to the three swine farms where florfenicol was heavily used compared with the other sites. Meanwhile, the detectable levels of florfenicol were also identified in soils from two of these three farms using ultra-performance liquid chromatography tandem mass spectrometry. It appears that amount of florfenicol used on swine farms and the spreading of soils with swine waste could promote the prevalence and abundance of FRGs, including the linezolid resistance genes cfr and optrA, in adjacent soils, and agricultural application of swine manure with florfenicol may have caused a residual level of florfenicol in the soils.