Synthesis of GO-SiO2/ZnO/Fe3O4 nano adsorbent for preconcentration of aflatoxins in food samples using SPE-HPLC-FLD method

This study demonstrates a new extraction method for determination of aflatoxins (AFs) in food samples by a GO-SiO2/ZnO/Fe3O4 nanocomposite as new and effective sorbent. The nanocomposite structure was confirmed by FT-IR, XRD, EDX, FE-SEM, TEM, and mapping techniques. Optimization of the extraction process was conducted by investigating pH, adsorbent amount, sample volume, and solvent volume using central composite design (CCD). The method showed good linearity for AFs B1, B2, G1, and G2 within specified ranges. Detection and quantification limits were 0.06-0.53 and 0.20-1.62 ng mL-1, respectively. The high performance liquid chromatography with fluorescence detector assisted by solid phase extraction (SPE-HPLC-FLD) method was applied to food samples, achieving recoveries of 70.15-97.08 %. Accuracy was confirmed through recovery measurements in spiked samples, with ranges of 70.15-97.85 % in wheat, 70.01-91.97 % in chickpeas, and 71.29-93.92 % in white pepper. Reusability and cost-effectiveness suggest its potential for preconcentration and determination of AFs in food samples.

Bio-nanoparticles sensor couple with smartphone digital image colorimetry and dispersive liquid-liquid microextraction for aflatoxin B1 detection

A novel nanobiosensor-based colorimetric method was developed by integrating ZnO nanoparticles functionalized with curcumin, dispersive liquid-liquid microextraction (DLLME), and smartphone digital image colorimetry for the sensitive detection of aflatoxin B1 (AFB1) in baby food samples. The unique combination of biologically-derived ZnO nanoparticles with curcumin created a sensing platform, while DLLME provided efficient pre-concentration of the target analyte. A custom-designed portable colorimetric box enabled standardized image capture and analysis using a smartphone camera and colorimetric software. Under optimized conditions using chloroform as the extraction solvent and acetonitrile as the disperser solvent, the method achieved a remarkable limit of detection of 0.09 μg/kg within linear concentration range of 0-1 μg/L. The calibration curves demonstrated excellent linearity (R2 > 0.9906) with high precision (RSD < 5.52%). The method was successfully validated using baby food samples, achieving high recoveries (89.8-94.2%). This innovative integration of nanobiosensing, microextraction, and smartphone technology offers a rapid, highly sensitive, and cost-effective platform for on-site AFB1 detection in food safety applications, particularly beneficial for resource-limited settings.

Simultaneous determination of multiple mycotoxins in corn and wheat by high efficiency extraction and purification based on polydopamine and ionic liquid bifunctional nanofiber mat

Due to the universality and harmfulness of mycotoxin co-contamination in cereals, it is of great significance to simultaneously monitor various mycotoxins co-polluted to ensure food safety and public health. In this work, a nanofiber mat modified by polydopamine and ionic liquid (PDA-IL-NFsM) was prepared and utilized as a solid-phase extraction (SPE) adsorbent for the simultaneous quantitative detection of multiple mycotoxins in corn and wheat. The PDA-IL-NFsM can form multiple retention mechanisms with the targets through hydrogen bond, π-π interaction, electrostatic or hydrophobic interaction, it shows favorable simultaneous adsorption performance (adsorption efficiency mostly higher than 88.27%) for fifteen mycotoxins in seven classes. Moreover, it can significantly reduce the matrix effect (lower than -13.69%), showing a good purification effect on the sample matrix. Based on the superior performance of PDA-IL-NFsM, a simple sample preparation method was established. The sample extract is simply diluted with water for SPE, and the eluent can be directly collected for ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) analysis. The detection limit can reach 0.04-4.21 μg kg^-1, the recovery was 80.09%-113.01%, and the relative standard deviations of intra-day and inter-day precision were 2.80%-14.81% and 0.68%-13.80% respectively. The results show that the proposed method has good sensitivity, accuracy and precision, and has practical application potential.

Dispersive micro solid phase extraction based ionic liquid functionalized ZnO nanoflowers couple with chromatographic methods for rapid determination of aflatoxins in wheat and peanut samples

Aflatoxins (AFs) contaminate agricultural products in a wide range of ways during their harvesting, storage and transport. Therefore, the detection of AFs has certain practical significance. Herein, a dispersive micro solid phase extraction (D-µSPE) technology was constructed based on 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]) fabricated ZnO nanoflowers for AFs extraction from food matrix before HPLC procedure. The key parameters affecting the extraction efficiency were studied. Under optimal experimental conditions, the method showed excellent linearity with high correlation coefficients (≥0.994). LOD and LOQ were 0.034 and 0.114 μg/kg for AFB1, 0.024 and 0.082 μg/kg for AFB2, 0.067 and 0.226 μg/kg for AFG1 and 0.025 and 0.084 μg/kg for AFG2. The recovery of actual samples spiked with analytes (at 5, 15 and 20 μg/kg) were from 93.8 to 105.1%. Overall, an accurate AFs analysis method was developed and could be applied to the determination of AFs in various food and agricultural products.

Deep eutectic solvent based ultrasound assisted emulsification microextraction for preconcentration and voltammetric determination of aflatoxin B1 in cereal samples

A new and simple deep eutectic solvent based ultrasound-assisted emulsification microextraction (DES-UAEME) procedure has been developed for preconcentration and voltammetric determination of aflatoxin B1 (AFB1) in cereal products. The method is based on the acetonitrile-based extraction of AFB1 from homogenized cereal samples followed by a DES-UAEME procedure for subsequent differential pulse voltammetry (DPV) determination in a microcell. A DES composed of choline chloride and urea (ChCl-Ur) was used as the extraction solvent and electrolyte for DPV detection. Various parameters affecting the extraction efficiency of AFB1 were evaluated and optimized. Under optimum conditions the calibration graph was linear in the range of 0.2-80.0 μg L^-1 (R² = 0.9966) and the limit of detection (3S_b) was estimated to be 0.05 μg L^-1. The intra-day and inter-day precision (RSD%) for determination of 5.0 μg L^-1 AFB1 were 3.4% and 3.9%, respectively. The proposed method was also successfully applied for preconcentration and determination of AFB1 in different cereal samples and good relative recoveries were obtained over a range of 94 to 104%.

Miniaturized vortex assisted-dispersive molecularly imprinted polymer micro-solid phase extraction and HPLC-MS/MS for assessing trace aflatoxins in cultured fish

A dispersive micro-solid phase extraction approach using a molecularly imprinted polymer as an adsorbent has been developed for pre-concentrating aflatoxins from cultured fish. Aflatoxins were first isolated from fish muscle and liver by an ultrasound assisted extraction procedure using a 60 : 40 acetonitrile/0.1 M KH2PO4 aqueous buffer (pH 6.0) mixture. Polymeric adsorbent beads were synthesized using 5,7-dimethoxycoumarin as a dummy template, methacrylic acid as a functional monomer, divinylbenzene as a crosslinker, and 2,2'-azobisisobutyronitrile as an initiator. Parameters affecting the steps of extraction procedure, including the sample (fish extract) pH, adsorption stirring speed and time, desorption stirring speed and time, elution solvent ratio, and polymer capacity, were investigated and optimized. The limit of detection was found to vary from 0.29 to 0.61 μg kg-1 for the several aflatoxins. The proposed method was shown to be accurate and precise. Intraday and inter-day relative standard deviations were lower than 20%, and intraday and inter-day analytical recoveries were within the 80-100% range. The prepared adsorbent in the dispersive micro-solid phase extraction format was re-usable, and the pre-concentration procedure was found to be simple, rapid and highly selective and sensitive to identify/quantify AFs in fish.

Detection of Aflatoxins in Different Matrices and Food-Chain Positions

Aflatoxins, produced mainly by filamentous fungi Aspergillus flavus and Aspergillus parasiticus, are one of the most carcinogenic compounds that have adverse health effects on both humans and animals consuming contaminated food and feed, respectively. Aflatoxin B1 (AFB1) and aflatoxin B2 (AFB2) as well as aflatoxin G1(AFG1) and aflatoxin G2 (AFG2) occur in the contaminated foods and feed. In the case of dairy ruminants, after the consumption of feed contaminated with aflatoxins, aflatoxin metabolites [aflatoxin M1 (AFM1) and aflatoxin M2 (AFM2)] may appear in milk. Because of the health risk and the official maximum limits of aflatoxins, there is a need for application of fast and accurate testing methods. At present, there are several analytical methods applied in practice for determination of aflatoxins. The aim of this review is to provide a guide that summarizes worldwide aflatoxin regulations and analytical methods for determination of aflatoxins in different food and feed matrices, that helps in the decision to choose the most appropriate method that meets the practical requirements of fast and sensitive control of their contamination. Analytical options are outlined from the simplest and fastest methods with the smallest instrument requirements, through separation methods, to the latest hyphenated techniques.

Rapid and Sensitive Detection of Aflatoxin B1, B2, G1 and G2 in Vegetable Oils Using Bare Fe3O4 as Magnetic Sorbents Coupled with High-Performance Liquid Chromatography with Fluorescence Detection

This paper reports a simple, sensitive and reliable method for the simultaneous detection of aflatoxin B1, B2, G1 and G2 in vegetable oils. Aflatoxins were extracted by magnetic solid phase extraction followed by high-performance liquid chromatography, then postcolumn photochemical derivatization and finally detected by fluorescence detector. Vegetable oil samples were first diluted with hexane and then commercial bare Fe3O4 nanoparticles were directly employed as sorbents to extract aflatoxins from complex vegetable oil samples, which significantly simplified the procedure of sample preparation and largely improved the sample analysis throughput. The effects of various parameters such as the amount of sorbent, loading, washing and eluting conditions were carefully optimized to improve the extraction efficiencies of aflatoxins. Under the optimal conditions, the limits of detection of four aflatoxins ranged from 0.01 μg/kg to 0.16 μg/kg, and squared regression coefficients (R2) >0.9990 were obtained within the linear range of 0.1-20 μg/kg (except for aflatoxin G2 with 0.5-20 μg/kg). Furthermore, the recoveries spiked at four concentration levels in a blank vegetable oil sample were from 82.6 to 106.2%, with inter- and intraday relative standard deviations <9.8%, indicating good accuracy and precision of the proposed method.

Rapid determination of aflatoxin B1 by an automated immunomagnetic bead purification sample pretreatment method combined with high-performance liquid chromatography

We aimed to establish an automated versatile sample preconcentration method based on the modified immunomagnetic beads, which was utilized to enrich for aflatoxin B1 from the matrices. The critical main parameters affecting the extraction efficiency, such as usage amount of immunomagnetic beads, reaction time, elution time, and blending way were investigated. Under the optimized conditions, the content of aflatoxin B1 was analyzed by high-performance liquid chromatography, the mobile phase consists of water-acetonitrile-methanol (42:18:10, v/v/v), and fluorescence detection was performed with excitation and emission wavelengths at 360 and 440 nm, respectively. Moreover, the performance of preconcentration method was compared with the conventional method based on the immunoaffinity column. The accuracy of two clean-up methods was within the error range. In addition, the stability and recyclability of the immunomagnetic beads was studied by recycling them five times. The results for the respective analysis in various samples demonstrated that the developed extraction platform provides a promising approach that is simple, rapid, sensitive, and easy to use.

Mycotoxin Determination in Animal Feed: An LC-FLD Method for Simultaneous Quantification of Aflatoxins, Ochratoxins and Zearelanone in This Matrix

Mycotoxins are toxic compounds for humans and animals that are produced by fungi. Mycotoxin contamination in feed is a global safety concern and effective control of these compounds in this matrix is needed. This study proposes a simple, cost-effective analytical method based on liquid chromatography coupled with a fluorescence detector, which is suitable for the routine monitoring of some of the most important mycotoxins in feed: aflatoxins (G2, G1, B2, and B1), zearalenone, and ochratoxins A and B. Mycotoxin extraction, chromatographic separation and quantification are carried out simultaneously for all mycotoxins. The extraction procedure is performed using acetonitrile, water and orthophosphoric acid (80:19:1). Purification of the extract is carried out using an OASIS PRIME HLB solid-phase extraction cartridge followed by a dispersive liquid-liquid microextraction procedure. Aflatoxins G1 and B1 are derivatized post-column (photochemical reactor at 254 nm) to increase their signal. The method has been validated in feed for pigs, cows, sheep, and poultry with very satisfactory results. The detection limits are 2 μg/kg for aflatoxins B1 and G1, 0.64 μg/kg for aflatoxins B2 and G2, 42 μg/kg for zearalenone, and 5 μg/kg for ochratoxins A and B. These values are low enough to allow for monitoring of these mycotoxins in feed. Global recovery values were between 73.6% and 88.0% for all toxins with a relative standard deviation (RSD) % < 7%. This methodology will facilitate laboratory control and analysis of mycotoxins in feed.

Integrated in-syringe magnetic sheet solid-phase extraction and dispersive liquid-liquid microextraction for determination of aflatoxins in fresh and moldy breads

BACKGROUND

Magnetic three-dimensional graphene-based nanoadsorbents have unique characteristics such as large surface area, good thermal and chemical stability, and high adsorption capacity that make them efficient materials in sorbent-based extraction techniques. In this study, four aflatoxins (AFs) were analyzed in bread samples using magnetic three-dimensional graphene as the adsorbent phase in dispersive micro solid-phase extraction.

RESULTS AND CONCLUSIONS

In-syringe magnetic sheet solid-phase extraction based on magnetic three-dimensional graphene in tandem with dispersive liquid-liquid microextraction was used for the extraction and preconcentration of the target AFs. The effect of significant parameters of the method was investigated and the optimum conditions were determined as follows: adsorbent dosage, 20 mg; desorption/disperser solvent (methanol) volume, 700 μL; desorption solvent flow rate, 0.7 mL min^-1 ; pH, neutral; salt (NaCl) concentration, 10% (w/v); extraction solvent (chloroform) volume, 250 μL; and centrifugation rate (and time), 4000 rpm (5 min). The limits of detection and quantification were in the ranges 0.043-0.083 and 0.14-0.28 μg kg^-1 , respectively. The extraction method was followed by the HPLC technique with fluorescence detection and applied to the determination of the AFs in four different Iranian fresh and moldy bread samples. The relative recoveries were in the range 84-107% with relative standard deviations of 3.9-8.6%. © 2019 Society of Chemical Industry.

Recent Development of Aptamer Sensors for the Quantification of Aflatoxin B1

Aflatoxin B1 (AFB1) is one of the most frequently-found mycotoxins in contaminated food. As the content of mycotoxins is particularly low in food, the development of probes to detect AFB1 in foods with high sensitivity and selectivity is an urgent social need for the evaluation of food quality. Numerous techniques have been developed to monitor AFB1. Nevertheless, most of them require cumbersome, labor-consuming, and sophisticated instruments, which have limited their application. An aptamer is a single, short nucleic acid sequence that is capable of recognizing different targets. Owing to their unique properties, aptamers have been considered as alternatives to antibodies. Aptasensors are considered to be an emerging strategy for the quantification of aflatoxin B1 with high selectivity and sensitivity. In this review, we summarize recent developments in colormetric, electrochemical, SERS, and fluorescent aptasensors for the quantification of AFB1. Finally, the perspectives and current challenges of aptasensors for AFB1 are outlined.

Prevalent Mycotoxins in Animal Feed: Occurrence and Analytical Methods

Today, we have been witnessing a steady tendency in the increase of global demand for maize, wheat, soybeans, and their products due to the steady growth and strengthening of the livestock industry. Thus, animal feed safety has gradually become more important, with mycotoxins representing one of the most significant hazards. Mycotoxins comprise different classes of secondary metabolites of molds. With regard to animal feed, aflatoxins, fumonisins, ochratoxins, trichothecenes, and zearalenone are the more prevalent ones. In this review, several constraints posed by these contaminants at economical and commercial levels will be discussed, along with the legislation established in the European Union to restrict mycotoxins levels in animal feed. In addition, the occurrence of legislated mycotoxins in raw materials and their by-products for the feeds of interest, as well as in the feeds, will be reviewed. Finally, an overview of the different sample pretreatment and detection techniques reported for mycotoxin analysis will be presented, the main weaknesses of current methods will be highlighted.

Multiple mycotoxins analysis in animal feed with LC-MS/MS: Comparison of extract dilution and immunoaffinity clean-up

The aim of this study was a performance comparison of two clean-up procedures (dilutions versus immunoaffinity columns) in the simultaneous determination of eight mycotoxins (aflatoxin B1, deoxynivalenol, fumonisin B1 & B2, ochratoxin A, toxin T-2 & HT-2 and zearalenone) in the animal feed. After extraction the analytes were separated on a Kinetex Biphenyl column with a gradient elution using methanol/0.01 M ammonium acetate as a mobile phase and analyzed with the LC-MS/MS technique. Both of the procedures were validated by analysis of a series of spiked feed samples (n = 6) at three different concentration levels. Better signal to noise ratios were observed for immunoaffinity clean-up. The recoveries of analyses were in the range 88-110% for the dilution procedure and 78-120% for the immunoaffinity clean-up. The dilution procedure was more precise (coefficient of variation of the within-laboratory reproducibility for it was 7.8-22.4% in comparison to 12-35.5% for the immunoaffinity clean-up. The results show that both procedures fulfilled the requirements for mycotoxin analysis and can be used successfully in multi-analyte determination. Although the dilution procedure shows better precision and trueness, the immunoaffinity clean-up procedure can have advantages in more complex feed samples thanks to lower matrix effect and limits of detections.