Solid acids assisted matrix solid-phase dispersion microextraction of alkaloids by capillary electrophoresis coupled with quadrupole time-of-flight mass spectrometry

Simultaneous extraction and determination of alkaloids and organic acids in Uncariae Ramulas Cum Unicis by vortex-assisted matrix solid phase dispersion extraction coupled with UHPLC-MS/MS

A simple and efficient vortex-assisted matrix solid phase dispersion with a ultra-high-performance liquid chromatography-triple quadrupole mass spectrometer (VA-MSPD-UHPLC-MS/MS) was applied for simultaneous extraction and determination of seven alkaloids and three organic acids from Uncariae Ramulas Cum Unicis. The optimal extraction conditions of the target components were obtained by Box-Behnken design (BBD) combined with response surface methodology (RSM). The results of the method validation showed that this analytical method displayed good linearity with a correlation coefficient (r) no lower than 0.9990. The recoveries of ten active ingredients from Uncariae Ramulas Cum Unicis ranged from 95.9% to 103% (RSD ≤ 2.77%). The RSDs of intra-day and inter-day precisions were all below 2.97%. The present method exhibited not only lower solvent and sample usage, but also shorter sample processing and analysis time. Consequently, the developed VA-MSPD-UHPLC-MS/MS method could be successfully and effectively used for the extraction and analysis of ten active components from Uncariae Ramulas Cum Unicis.

A simple and sensitive preconcentration strategy by coupling salting-out assisted liquid-liquid extraction with online three-step stacking for the determination of potent anti-tumour compound vinblastine and its precursor in biological samples by capillary electrophoresis

A sensitive capillary electrophoresis strategy was developed by combining salting-out assisted liquid-liquid extraction and online three-step stacking to detect trace quantities of antitumour indole alkaloids in complex biological samples. The proposed strategy fully exploits these two technologies such that extraction, online stacking and separation are combined in a fast and efficient manner. First, salting-out assisted liquid-liquid extraction was used to extract three indole alkaloids (vinblastine sulfate, catharanthine sulfate and vindoline) from complex biomasses. An appropriate volume of acetonitrile (ACN) was mixed with a faecal aqueous solution to precipitate proteins. The mixed solution was vortexed, followed by the addition of ammonium sulfate ((NH₄)₂SO₄) to induce two-phase separation. Alkaloids were effectively extracted into the organic phase, which was then subjected to capillary electrophoresis (CE) analysis. The sensitivity of capillary electrophoresis was effectively improved by online three-step stacking. Good linearity of the calibration curve for each indole alkaloid was obtained in the concentration range of 0.1-1 μg/mL. Under optimal conditions, the sensitivity of ordinary injection was increased by up to 2366-fold, confirming the applicability of the proposed strategy for the sensitive determination of trace indole alkaloids in complex biological samples.

Traditional herbal medicine and nanomedicine: Converging disciplines to improve therapeutic efficacy and human health

Traditional herbal medicine (THM), an ancient science, is a gift from nature. For thousands of years, it has helped humans fight diseases and protect life, health, and reproduction. Nanomedicine, a newer discipline has evolved from exploitation of the unique nanoscale morphology and is widely used in diagnosis, imaging, drug delivery, and other biomedical fields. Although THM and nanomedicine differ greatly in time span and discipline dimensions, they are closely related and are even evolving toward integration and convergence. This review begins with the history and latest research progress of THM and nanomedicine, expounding their respective developmental trajectory. It then discusses the overlapping connectivity and relevance of the two fields, including nanoaggregates generated in herbal medicine decoctions, the application of nanotechnology in the delivery and treatment of natural active ingredients, and the influence of physiological regulatory capability of THM on the in vivo fate of nanoparticles. Finally, future development trends, challenges, and research directions are discussed.

Recent Applications of Capillary Electrophoresis in the Determination of Active Compounds in Medicinal Plants and Pharmaceutical Formulations

The present review summarizes scientific reports from between 2010 and 2019 on the use of capillary electrophoresis to quantify active constituents (i.e., phenolic compounds, coumarins, protoberberines, curcuminoids, iridoid glycosides, alkaloids, triterpene acids) in medicinal plants and herbal formulations. The present literature review is founded on PRISMA guidelines and selection criteria were formulated on the basis of PICOS (Population, Intervention, Comparison, Outcome, Study type). The scrutiny reveals capillary electrophoresis with ultraviolet detection as the most frequently used capillary electromigration technique for the selective separation and quantification of bioactive compounds. For the purpose of improvement of resolution and sensitivity, other detection methods are used (including mass spectrometry), modifiers to the background electrolyte are introduced and different extraction as well as pre-concentration techniques are employed. In conclusion, capillary electrophoresis is a powerful tool and for given applications it is comparable to high performance liquid chromatography. Short time of execution, high efficiency, versatility in separation modes and low consumption of solvents and sample make capillary electrophoresis an attractive and eco-friendly alternative to more expensive methods for the quality control of drugs or raw plant material without any relevant decrease in sensitivity.

Cucurbituril and zwitterionic surfactant-based matrix solid-phase dispersion microextraction to simultaneously determine terpenoids from Radix Curcumae

A rapid, efficient, and environmentally friendly matrix solid-phase dispersion microextraction was established to determine and quantify terpenoids in Radix Curcumae using ultra-high-performance liquid chromatography with a diode array detector. Various parameters affecting the extraction were investigated in detail, such as the grinding time, amount of adsorbent, type and concentration of elution solvent, and pH. The optimization of single-factor and response surface methodology was performed to confirm the best conditions in this procedure. The final optimized conditions were obtained by applying 70 mg of cucurbituril as adsorbent, 149 s as the optimum grinding time, and 228 mM of 3-(N,N-dimethylpalmitylammonio)propanesulfonate aqueous solution (pH 6.5) as the optimal elution solvent. The validated method showed a satisfactory linear range of 0.10-10 µg/mL for curdione and furanodiene, 0.01-10 µg/mL for isocurcumenol and germacrone, and 0.05-10 µg/mL for furanodienone, while the correlation coefficients ranged from 0.9945 to 0.9970. The recoveries of the investigated analytes at two spiked concentration levels (0.1 and 1.0 µg/mL) ranged from 96.53 to 104.60%. In addition, this method displayed acceptable reproducibility (relative standard deviation ≤ 3.66%). The results showed that the newly proposed matrix solid-phase dispersion microextraction method was successfully applied to analyze curdione, isocurcumenol, furanodienone, germacrone and furanodiene in Radix Curcumae samples.

Recent advances of green pretreatment techniques for quality control of natural products

A few advancing technologies for natural product analysis have been widely proposed, which focus on decreasing energy consumption and developing an environmentally sustainable manner. These green sample pretreatment and analysis methods following the green Analytical Chemistry (GAC) criteria have the advantage of improving the strategy of chemical analyses, promoting sustainable development to analytical laboratories, and reducing the negative effects of analysis experiments on the environment. A few minimized extraction methodologies have been proposed for replacing the traditional methods in the quality evaluation of natural products, mainly including solid-phase microextraction (SPME) and liquid phase microextraction (LPME). These procedures not only have no need for large numbers of samples and toxic reagent, but also spend a small amount of extraction and analytical time. This overview aims to list out the main green strategies on the application of quality evaluation and control for natural products in the past 3 years.