Xylan-based nanoparticles: prodrugs for ibuprofen release

Recent Advances in Biomedical Applications of Mannans and Xylans

Plant-based phytochemicals, including flavonoids, alkaloids, tannins, saponins, and other metabolites, have attracted considerable attention due to their central role in synthesizing nanomaterials with various biomedical applications. Hemicelluloses are the second most abundant among naturally occurring heteropolymers, accounting for one-third of all plant constituents. In particular, xylans, mannans, and arabinoxylans are structured polysaccharides derived from hemicellulose. Mannans and xylans are characterized by their linear configuration of β-1,4-linked mannose and xylose units, respectively. At the same time, arabinoxylan is a copolymer of arabinose and xylose found predominantly in secondary cell walls of seeds, dicotyledons, grasses, and cereal tissues. Their widespread use in tissue engineering, drug delivery, and gene delivery is based on their properties, such as cell adhesiveness, cost-effectiveness, high biocompatibility, biodegradability, and low immunogenicity. Moreover, it can be easily functionalized, which expands their potential applications and provides them with structural diversity. This review comprehensively addresses recent advances in the field of biomedical applications. It explores the potential prospects for exploiting the capabilities of mannans and xylans in drug delivery, gene delivery, and tissue engineering.

Size-controlled synthesis of xylan micro / nanoparticles by self-assembly of alkali-extracted xylan

Valorization of underutilized biobased feedstocks like hetero-polysaccharides is critical for the development of the biorefinery concept. Towards this goal, highly uniform xylan micro/nanoparticles with a particle size ranging from 400 nm to 2.5 μm in diameter were synthesized by a facile self-assembly method in aqueous solutions. Initial concentration of the insoluble xylan suspension was utilized to control the particle size. The method utilized supersaturated aqueous suspensions formed at standard autoclaving conditions without any other chemical treatments to create the resulting particles as solutions cooled to room temperature. Processing parameters of the xylan micro/nanoparticles were systematically studied and correlated with both the morphology and size of xylan particles. By adjusting the crowding of the supersaturated solutions, highly uniform dispersions of xylan particles were synthesized of defined size. The xylan micro/nanoparticles prepared by self-assembly have a quasi-hexagonal shape, like a tile, and depending upon solution concentrations xylan nanoparticles with a thickness of <100 nm were achieved at high concentrations. Based on the usefulness of polysaccharide nanoparticles, like cellulose nanocrystals, these particles have potential for unique structures for hydrogels, aerogels, drug delivery, and photonic materials. This study highlights the formation of a diffraction grating film for visible light with these size-controlled particles.

Carboxymethyl-Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles for Drug Delivery: Influence of the Coating Thickness on the Particle Properties

Carboxymethyl-dextran (CMD)-coated iron oxide nanoparticles (IONs) are of great interest in nanomedicine, especially for applications in drug delivery. To develop a magnetically controlled drug delivery system, many factors must be considered, including the composition, surface properties, size and agglomeration, magnetization, cytocompatibility, and drug activity. This study reveals how the CMD coating thickness can influence these particle properties. ION@CMD are synthesized by co-precipitation. A higher quantity of CMD leads to a thicker coating and a reduced superparamagnetic core size with decreasing magnetization. Above 12.5−25.0 g L−1 of CMD, the particles are colloidally stable. All the particles show hydrodynamic diameters < 100 nm and a good cell viability in contact with smooth muscle cells, fulfilling two of the most critical characteristics of drug delivery systems. New insights into the significant impact of agglomeration on the magnetophoretic behavior are shown. Remarkable drug loadings (62%) with the antimicrobial peptide lasioglossin and an excellent efficiency (82.3%) were obtained by covalent coupling with the EDC/NHS (N-ethyl-N′-(3-(dimethylamino)propyl)carbodiimide/N-hydroxysuccinimide) method in comparison with the adsorption method (24% drug loading, 28% efficiency). The systems showed high antimicrobial activity with a minimal inhibitory concentration of 1.13 µM (adsorption) and 1.70 µM (covalent). This system successfully combines an antimicrobial peptide with a magnetically controllable drug carrier.

Herb Polysaccharide-Based Drug Delivery System: Fabrication, Properties, and Applications for Immunotherapy

Herb polysaccharides (HPS) have been studied extensively for their healthcare applications. Though the toxicity was not fully clarified, HPS were widely accepted for their biodegradability and biocompatibility. In addition, as carbohydrate polymers with a unique chemical composition, molecular weight, and functional group profile, HPS can be conjugated, cross-linked, and functionally modified. Thus, they are great candidates for the fabrication of drug delivery systems (DDS). HPS-based DDS (HPS-DDS) can bypass phagocytosis by the reticuloendothelial system, prevent the degradation of biomolecules, and increase the bioavailability of small molecules, thus exerting therapeutic effects. In this review, we focus on the application of HPS as components of immunoregulatory DDS. We summarize the principles governing the fabrication of HPS-DDS, including nanoparticles, micelles, liposomes, microemulsions, hydrogels, and microneedles. In addition, we discuss the role of HPS in DDS for immunotherapy. This comprehensive review provides valuable insights that could guide the design of effective HPS-DDS.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

The Food-Materials Nexus: Next Generation Bioplastics and Advanced Materials from Agri-Food Residues

The most recent strategies available for upcycling agri-food losses and waste (FLW) into functional bioplastics and advanced materials are reviewed and the valorization of food residuals are put in perspective, adding to the water-food-energy nexus. Low value or underutilized biomass, biocolloids, water-soluble biopolymers, polymerizable monomers, and nutrients are introduced as feasible building blocks for biotechnological conversion into bioplastics. The latter are demonstrated for their incorporation in multifunctional packaging, biomedical devices, sensors, actuators, and energy conversion and storage devices, contributing to the valorization efforts within the future circular bioeconomy. Strategies are introduced to effectively synthesize, deconstruct and reassemble or engineer FLW-derived monomeric, polymeric, and colloidal building blocks. Multifunctional bioplastics are introduced considering the structural, chemical, physical as well as the accessibility of FLW precursors. Processing techniques are analyzed within the fields of polymer chemistry and physics. The prospects of FLW streams and biomass surplus, considering their availability, interactions with water and thermal stability, are critically discussed in a near-future scenario that is expected to lead to next-generation bioplastics and advanced materials.

Reactive Nanoparticles Derived from Polysaccharide Phenyl Carbonates

Polysaccharide (PS) based nanoparticles (NP) are of great interest for biomedical applications. A key challenge in this regard is the functionalization of these nanomaterials. The aim of the present work was the development of reactive PS-NP that can be coupled with an amino group containing compounds under mild aqueous conditions. A series of cellulose phenyl carbonates (CPC) and xylan phenyl carbonates (XPC) with variable degrees of substitution (DS) was obtained by homogeneous synthesis. The preparation of PS-NP by self-assembling of these hydrophobic derivatives was studied comprehensively. While CPC mostly formed macroscopic aggregates, XPC formed well-defined spherical NP with diameters around 100 to 200 nm that showed a pronounced long-term stability in water against both particle aggregation as well as cleavage of phenyl carbonate moieties. Using an amino group functionalized dye it was demonstrated that the novel XPC-NP are reactive towards amines. A simple coupling procedure was established that enables direct functionalization of the reactive NP in an aqueous dispersion. Finally, it was demonstrated that dye functionalized XPC-NP are non-cytotoxic and can be employed in advanced biomedical applications.

A Review of Lignocellulosic-Derived Nanoparticles for Drug Delivery Applications: Lignin Nanoparticles, Xylan Nanoparticles, and Cellulose Nanocrystals

Due to their biocompatibility, biodegradability, and non-toxicity, lignocellulosic-derived nanoparticles are very potential materials for drug carriers in drug delivery applications. There are three main lignocellulosic-derived nanoparticles discussed in this review. First, lignin nanoparticles (LNPs) are an amphiphilic nanoparticle which has versatile interactions toward hydrophilic or hydrophobic drugs. The synthesis methods of LNPs play an important role in this amphiphilic characteristic. Second, xylan nanoparticles (XNPs) are a hemicellulose-derived nanoparticle, where additional pretreatment is needed to obtain a high purity xylan before the synthesis of XNPs. This process is quite long and challenging, but XNPs have a lot of potential as a drug carrier due to their stronger interactions with various drugs. Third, cellulose nanocrystals (CNCs) are a widely exploited nanoparticle, especially in drug delivery applications. CNCs have low cytotoxicity, therefore they are suitable for use as a drug carrier. The research possibilities for these three nanoparticles are still wide and there is potential in drug delivery applications, especially for enhancing their characteristics with further surface modifications adjusted to the drugs.

Fungicide-loaded and biodegradable xylan-based nanocarriers

The delivery of agrochemicals is typically achieved by the spraying of fossil-based polymer dispersions, which might accumulate in the soil and increase microplastic pollution. A potentially sustainable alternative is the use of biodegradable nano- or micro-formulations based on biopolymers, which can be degraded selectively by fungal enzymes to release encapsulated agrochemicals. To date, no hemicellulose nanocarriers for drug delivery in plants have been reported. Xylan is a renewable and abundant feedstock occurring naturally in high amounts in hemicellulose - a major component of the plant cell wall. Herein, xylan from corncobs was used to produce the first fungicide-loaded xylan-based nanocarriers by interfacial polyaddition in an inverse miniemulsion using toluene diisocyanate (TDI) as a crosslinking agent. The nanocarriers were redispersed in water and the aqueous dispersions were proven to be active in vitro against several pathogenic fungi, which are responsible for fungal plant diseases in horticulture or agriculture. Besides, empty xylan-based nanocarriers stimulated the growth of fungal mycelium, which indicated the degradation of xylan in the presence of the fungi, and underlined the degradation as a trigger to release a loaded agrochemical. This first example of crosslinked xylan-based nanocarriers expands the library of biodegradable and biobased nanocarriers for agrochemical release and might play a crucial role for future formulations in plant protection.

Plant celluloses, hemicelluloses, lignins, and volatile oils for the synthesis of nanoparticles and nanostructured materials

A huge variety of plants are harvested worldwide and their different constituents can be converted into a broad range of bionanomaterials. In parallel, much research effort in materials science and engineering is focused on the formation of nanoparticles and nanostructured materials originating from agricultural residues. Cellulose (40-50%), hemicellulose (20-40%), and lignin (20-30%) represent major plant ingredients and many techniques have been described that separate the main plant components for the synthesis of nanocelluloses, nano-hemicelluloses, and nanolignins with divergent and controllable properties. The minor components, such as essential oils, could also be used to produce non-toxic metal and metal oxide nanoparticles with high bioavailability, biocompatibility, and/or bioactivity. This review describes the chemical structure, the physical and chemical properties of plant cell constituents, different techniques for the synthesis of nanocelluloses, nanohemicelluloses, and nanolignins from various lignocellulose sources and agricultural residues, and the extraction of volatile oils from plants as well as their use in metal and metal oxide nanoparticle production and emulsion preparation. Furthermore, details about the formation of activated carbon nanomaterials by thermal treatment of lignocellulose materials, a few examples of mineral extraction from agriculture waste for nanoparticle fabrication, and the emerging applications of plant-based nanomaterials in different fields, such as biotechnology and medicine, environment protection, environmental remediation, or energy production and storage, are also included. This review also briefly discusses the recent developments and challenges of obtaining nanomaterials from plant residues, and the issues surrounding toxicity and regulation.

Correlation of D-xylose with severity and morbidity-related factors of COVID-19 and possible therapeutic use of D-xylose and antibiotics for COVID-19

The SARS-Cov-2 pandemic that currently affects the entire world has been shown to be especially dangerous in the elderly (≥65 years) and in smokers, with notably strong comorbidity in patients already suffering from chronic diseases, such as Type 2 diabetes, cancers, chronic respiratory diseases, obesity, and hypertension. Inflammation of the lungs is the main factor leading to respiratory distress in patients with chronic respiratory disease and in patients with severe COVID-19. Several studies have shown that inflammation of the lungs in general and Type 2 diabetes are accompanied by the degradation of glycosaminoglycans (GAGs), especially heparan sulfate (HS). Several studies have also shown the importance of countering the degradation of HS in lung infections and Type 2 diabetes. D-xylose, which is the initiating element for different sulfate GAG chains (especially HS), has shown regeneration properties for GAGs. D-xylose and xylitol have demonstrated anti-inflammatory, antiglycemic, antiviral, and antibacterial properties in lung infections, alone or in combination with antibiotics. Considering the existing research on COVID-19 and related to D-xylose/xylitol, this review offers a perspective on why the association between D-xylose and antibiotics may contribute to significantly reducing the duration of treatment of COVID-19 patients and why some anti-inflammatory drugs may increase the severity of COVID-19. A strong correlation with scurvy, based on gender, age, ethnicity, smoking status, and obesity status, is also reviewed. Related to this, the effects of treatment with plants such as Artemisia are also addressed. CHEMICAL COMPOUNDS: D-xylose; xylitol; l-ascorbic Acid; D-glucuronic acid; N-acetylglucosamine; D-N-acetylglucosamine; N-acetylgalactosamine; galactose.

Biocompatible sulfated valproic acid-coupled polysaccharide-based nanocarriers with HDAC inhibitory activity

The development of bio-based nanoparticles (NPs) as drug containers is of increasing interest to circumvent several obstacles in drug therapy such as rapid drug metabolization, short serum half-life, and unspecific side effects. The histone deacetylase inhibitor valproic acid (VPA) is known for its anti-inflammatory as well as for its anti-cancer activity. Here, recently developed VPA-loaded NPs based on cellulose- and dextran VPA esters were modified with sulfuric acid half ester moieties to improve intracellular drug release. The NPs show rapid cellular uptake, are non-toxic in vitro and in vivo, and able to induce histone H3 hyperacetylation. Thus, they represent a potent drug delivery system for the application in a variety of treatment settings, such as inflammation, sepsis and defined cancer types. In addition, the flexible NP-system offers a broad range of further options for modification, e.g. for targeting strategies and multi-drug approaches.

Fabrication and characterization of lignin-xylan hybrid nanospheres as pesticide carriers with enzyme-mediated release property

Lignin nanospheres (LNPs) are an emerging high-value material platform to realize lignin valorization. The modification or introduction of new functions to LNPs is of great significance to expand its downstream applications. This work evaluated the technical feasibility of preparing lignin-xylan hybrid nanospheres (LXNPs) through a simple solution-based self-assembly process, with the goal of achieving the application as pesticide carriers for enzyme-mediated controlled release. Hybrid LXNPs with various weigh ratios (lignin to xylan, 3 : 1, 1 : 1, 1 : 3) were obtained using deep eutectic solvent-extracted condensed lignin and water-insoluble xylan fragments, which exhibited a nanosphere size of about 166-210 nm with considerable stability in the pH range of 4-10. LXNPs with lignin to xylan ratios of 3 : 1 and 1 : 1 showed well-defined core-shell structures with enriched hydroxyl groups on the surface. It was proposed that lignin could anchor xylan fragments through van der Waals force and hydrophobic interactions between lignin phenylpropanes and xylan molecular backbones, thus facilitating the self-assembly process for the formation of this specific spherical structure. The resulting hydrophobic LXNPs core enabled the facile encapsulation of the biological pesticide avermectin (AVM) with 57.9-67.0% efficiency using one-pot synthesis. When these AVM-encapsulated LXNPs were subjected to enzymatic hydrolysis using xylanase, considerable AVM release of 44.8-55.1% was achieved after 16 h, in comparison to the 4.1% release only for those without xylanase. This work showed the high promise of fabricating hybrid LXNPs through the self-assembly process and also provided a universal nanosphere carrier for drug encapsulation and subsequent enzyme-mediated controlled release.

Development of chia seed (Salvia hispanica) mucilage films plasticized with polyol mixtures: Mechanical and barrier properties

Food packaging is one of the main contributors to the high rates of environmental contamination; therefore, interest has emerged on the use of biopolymers as alternative materials to replace conventional food packaging. Chia seed (Salvia hispanica) is recognized by having a high content of a polysaccharide called mucilage. The aim of this study was to evaluate the feasibility using of chia seed mucilage (CSM) and a polyol mixture containing glycerol and sorbitol for the development of films. CSM films with higher sorbitol content showed superior tensile strength (3.23 N/mm²) and lower water vapor permeability (1.3*10^-9 g/m*s*Pa), but had poor flexibility compared to other treatments. Conversely, high glycerol content showed high elongation at break (67.55%) and solubility (22.75%), but poor water vapor permeability and tensile strength. Film formulations were optimized implementing a factorial design according to response surface methodology. Raman spectra analysis showed shifts from 854 to 872 cm^-1 and 1061 to 1076 cm^-1, β (CCO) modes, indicating an increase in hydrogen bonding, responsible for the high tensile strength and decreased water vapor permeability observed in this study. The optimum conditions of polyol concentration were 1.3 g of glycerol and 2.0 g of sorbitol per g of CSM. Based on these results, chia seed mucilage can successfully be used to develop biofilms with potential to be used in drug delivery and edible food coating applications.

Nanoparticles Based on Hydrophobic Polysaccharide Derivatives-Formation Principles, Characterization Techniques, and Biomedical Applications

Polysaccharide (PS) nanoparticles (NP) are fascinating materials that combine huge application potential with the unique beneficial features of natural biopolymers. Different types of PS-NP can be distinguished depending on the basic preparation principles (top-down vs bottom-up vs coating of nanomaterials) and the material from which they are obtained (native PS vs chemically modified PS derivatives vs nanocomposites). This review provides a comprehensive overview of an approach towards PS-NP that has gained rapidly increasing interest within the last decade; the nanoself-assembling of hydrophobic PS derivatives. This facile process is easy to perform and offers a broad structural diversity in terms of the PS backbone and the additional functionalities that can be introduced. Fundamental principles of different NP preparation techniques along with useful characterization methods are presented in this work. A comprehensive summary of PS-NP prepared by different techniques and with various PS backbones and types/amounts of hydrophobic substituents is given. The intention is to demonstrate how different parameters determine the size, size distribution, and zeta-potential of the particles. Moreover, application trends in biomedical areas are highlighted in which tailored functional PS-NP are evaluated and constantly developed further.

Photodynamic Therapy Activity of New Porphyrin-Xylan-Coated Silica Nanoparticles in Human Colorectal Cancer

Photodynamic therapy (PDT) using porphyrins has been approved for treatment of several solid tumors due to the generation of cytotoxic reactive oxygen species (ROS). However, low physiological solubility and lack of selectivity towards tumor sites are the main limitations of their clinical use. Nanoparticles are able to spontaneously accumulate in solid tumors through an enhanced permeability and retention (EPR) effect due to leaky vasculature, poor lymphatic drainage, and increased vessel permeability. Herein, we proved the added value of nanoparticle vectorization on anticancer efficacy and tumor-targeting by 5-(4-hydroxyphenyl)-10,15,20-triphenylporphyrin (TPPOH). Using 80 nm silica nanoparticles (SNPs) coated with xylan-TPPOH conjugate (TPPOH-X), we first showed very significant phototoxic effects of TPPOH-X SNPs mediated by post-PDT ROS generation and stronger cell uptake in human colorectal cancer cell lines compared to free TPPOH. Additionally, we demonstrated apoptotic cell death induced by TPPOH-X SNPs-PDT and the interest of autophagy inhibition to increase anticancer efficacy. Finally, we highlighted in vivo, without toxicity, elevated anticancer efficacy of TPPOH-X SNPs through improvement of tumor-targeting compared to a free TPPOH protocol. Our work demonstrated for the first time the strong anticancer efficacy of TPPOH in vitro and in vivo and the merit of SNPs vectorization.

Diffusion and Relaxometry to Study Carbohydrates Dissolved in Ionic Liquids

Solutions of xylan and xylose in 1-ethyl-3-methylimidazolium acetate [C2mim] [OAc], a room temperature ionic liquid, were examined across a range of temperatures (20°C–70 °C) using: NMR spectroscopy; diffusion; low-field (20 MHz) spin–lattice and spin–spin relaxation times; and rheological measurements through the zero shear rate viscosity. The addition of xylose and xylan affect the mobility of the ions, with a decrease occurring when the carbohydrate concentration is increased. The ratio of the diffusion coefficients for the anion to the cation remained constant upon the addition of both xylan and xylose, showing that the anion and cation were equally affected by the presence of the carbohydrate. The translational diffusion motion of the ions in the xylose solutions were similar in value to published results for cellobiose, which we explain in terms of the number of available carbohydrate OH groups that the ions are interacting with. We observe from the various NMR results that the dissolving mechanism of xylan in [C2mim] [OAc] is similar to that for cellulose.

Preparation and Application of Phosphorylated Xylan as a Flocculant for Cationic Ethyl Violet Dye

In this study, phosphorylated birchwood xylan was produced under alkali conditions using trisodium trimetaphosphate. Three single-factor experiments were used to explore the influences of time, temperature, and the molar ratio of trisodium trimetaphosphate to xylan on the degree of substitution (DS) and charge density of xylan. The response surface methodology was used to explore the interaction of these three factors. Phosphorylated xylan with a maximum DS of 0.79 and a charge density of -3.40 mmol/g was produced under the optimal conditions of 80 °C, 4 h, and a molar ratio of xylan/sodium trimetaphosphate (STMP) of 1/3. Fourier transform infrared (FTIR), ascorbic acid method analyses, and inductively coupled plasma⁻atomic emission spectrometer (ICP-AES) analyses confirmed that the phosphate groups were successfully attached to xylan. Thermogravimetric analysis confirmed that phosphorylated xylan was less stable than birchwood xylan. Furthermore, the phosphorylated xylan was applied as a flocculant for removing ethyl violet dye from a simulated dye solution. The results indicated that more than 95% of the dye was removed from the solution. The theoretical and experimental values of charge neutralization for the dye removal were close to one another, confirming that charge neutralization was the main mechanism for the interaction of dye and phosphorylated xylan. The impacts of salts on the flocculation efficiency of phosphorylated xylan were also analyzed.

Tailored Approaches in Drug Development and Diagnostics: From Molecular Design to Biological Model Systems

Approaches to increase the efficiency in developing drugs and diagnostics tools, including new drug delivery and diagnostic technologies, are needed for improved diagnosis and treatment of major diseases and health problems such as cancer, inflammatory diseases, chronic wounds, and antibiotic resistance. Development within several areas of research ranging from computational sciences, material sciences, bioengineering to biomedical sciences and bioimaging is needed to realize innovative drug development and diagnostic (DDD) approaches. Here, an overview of recent progresses within key areas that can provide customizable solutions to improve processes and the approaches taken within DDD is provided. Due to the broadness of the area, unfortunately all relevant aspects such as pharmacokinetics of bioactive molecules and delivery systems cannot be covered. Tailored approaches within (i) bioinformatics and computer-aided drug design, (ii) nanotechnology, (iii) novel materials and technologies for drug delivery and diagnostic systems, and (iv) disease models to predict safety and efficacy of medicines under development are focused on. Current developments and challenges ahead are discussed. The broad scope reflects the multidisciplinary nature of the field of DDD and aims to highlight the convergence of biological, pharmaceutical, and medical disciplines needed to meet the societal challenges of the 21st century.

Structural and thermal analysis of a hyper-branched exopolysaccharide produced by submerged fermentation of mushroom mycelium

An exopolysaccharide (PTR-EPS1) purified from the culture medium of the mycelial fermentation of Pleurotus tuber-regium had a weight-average molecular mass of 173.6 kDa and a radius of 55.6 nm.

Novel thiol- amine- and amino acid functional xylan derivatives synthesized by thiol-ene reaction

In the present work, novel thioether xylans were synthesized via a simple procedure using water as solvent. First, allyl groups were introduced on the backbone of xylan by etherification of allyl chloride in aqueous alkaline conditions at 40°C, providing degree of substitution (DS) values up to 0.49. On the second step, the allyl groups were reacted with thioacetic acid, cysteamine hydrochloride or cysteine providing novel thiol-, amine- or amino acid functionalized xylans. The presented modular approach offers broad possibilities for developing new polysaccharide based materials. The thioacetic acid - ene reaction is reported for the first time for polysaccharide modification, yielding a protected thiol that can be stored at atmospheric conditions and can be deprotected by simple hydrolysis just prior to use, providing a versatile water soluble polythiol. The free thiol-groups were utilized for hydrogel formation through thiol-thiol oxidative coupling, allowing good control over the hydrogel shape, such as 3D hydrogel scaffolds and cross-linked foams. Further, the thiol-containing xylan was used to modify filter paper surface by a simple dipping method, which provides a novel and convenient way for introducing thiol-functionality on paper surface.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update for 2009-2010

This review is the sixth update of the original article published in 1999 on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2010. General aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, arrays and fragmentation are covered in the first part of the review and applications to various structural typed constitutes the remainder. The main groups of compound that are discussed in this section are oligo and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals. Many of these applications are presented in tabular form. Also discussed are medical and industrial applications of the technique, studies of enzyme reactions and applications to chemical synthesis.

Thermoresponsive xylan hydrogels via copper-catalyzed azide-alkyne cycloaddition

In the present work, hydrogels of birch wood xylan and thermoresponsive poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEG-PPG-PEG) were prepared using copper catalyzed alkyne-azide cycloaddition (CuAAC) in aqueous reaction conditions. First, reactive azide groups were introduced on the backbone of xylan by etherification of 1-azido-2,3-epoxypropane in alkaline water/isopropanol-mixture at ambient temperature, providing degree of substitution (DS) values up to 0.28. On the second step, the azide groups were reacted with propargyl bifunctional PEG-PPG-PEG utilizing CuAAC, leading to formation of crosslinked hydrogels. The novel xylan derivatives were characterized with liquid and solid state nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FT-IR) and elemental analysis (EA). The temperature controlled swelling behavior of the developed hydrogels was evaluated in the range of 7-70 °C by water absorption and compressive stress-strain measurements, which showed a reduction in water content and change in stiffness with increasing temperature. The morphology of the hydrogels at different temperatures was studied by scanning electron microscopy (SEM), which showed a reduction in pore size with increasing temperature.

Studies on the fibre surfaces modified with xylan polyelectrolytes

Xylan was isolated from birch wood chips by using pressurized hot water extraction (PHWE). The extracted xylan was chemically modified yielding three different xylan derivatives (XDs): xylan sulfate (XS), carboxymethyl xylan (CMX) and xylan-4-[N,N,N-trimethylammonium]butyrate chloride (XTMAB). The structure and molecular weight of XDs was determined by using NMR spectroscopy and size exclusion chromatography (SEC). The potential utilization of xylan polyelectrolytes for modifying fibre surfaces was assessed by sorption experiments using bleached pine Kraft pulp as substrate. Polyelectrolyte titration method was chosen for estimating the amount of sorbed XDs onto the fibres. The cationic xylan derivative XTMAB had a strong interaction with fibres while the anionic derivatives did not show any sorption. X-ray photoelectron spectroscopy (XPS) and time of flight secondary ion mass spectrometry (ToF-SIMS) were selected as advanced surface analyses for studying the amount of surface anionic groups and the surface distribution of the XTMAB. XPS and polyelectrolyte titration results suggested that the XTMAB is sorbed onto the fibre surfaces. ToF-SIMS imaging showed that XTMAB was evenly distributed on fibre surfaces.