Non-Woven Fibrous Materials with Antibacterial Properties Prepared by Tailored Attachment of Quaternized Chitosan to Electrospun Mats from Maleic Anhydride Copolymer

Biodegradable trimethyl chitosan nanofiber mats by electrospinning as bioabsorbable dressings for wound closure and healing

The paper aimed to prepare quaternary chitosan-based nanofibers as bioabsorbable wound dressings. To this aim, fully biodegradable chitosan/N,N,N-trimethyl chitosan (TMC) nanofibers were designed and prepared via electrospinning, using poly(ethylene glycol) as sacrificial additive. The new biomaterials were structurally and morphologically characterized by FTIR and NMR spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy, and their properties required for wound dressings application were investigated and discussed in detail. Thus, the nanofiber behavior was investigated by swelling, dynamic vapor sorption, and in vitro biodegradation in media mimicking the wound exudate. The mechanical properties were analysed from the stress-strain curves, the bioadhesivity from the texture analysis and the mucoadhesivity from the Zeta potential and transmittance measurements. The antimicrobial activity was assessed against S. aureus and E. coli strains, and the biocompatibility was tested in vitro on normal human dermal fibroblasts, and in vivo on rats. The application of the fiber mats with the best balance of properties as dressings on deep burn wound models in rats showed wound closure and active healing, with fully restoration of epithelia. It was concluded that the combination of chitosan with TMC into nanofibers provides new potential bioabsorbable wound dressing, opening new perspectives in regenerative medicine.

Quaternized chitosan (nano)fibers: A journey from preparation to high performance applications

The industrial production of chitosan, initiated over 50 years ago, has transformed its application across diverse industries, agriculture, and medicine. To enhance its properties, numerous chitosan derivatives have been synthesized. The quaternization of chitosan has proven beneficial, as it not only enhances its properties but also imparts water solubility, expanding its potential for a wider range of applications. Specifically, the utilization of quaternized chitosan-based nanofibers has leveraged the synergistic benefits of quaternized chitosan (including hydrophilicity, bioadhesiveness, antimicrobial, antioxidant, hemostatic, and antiviral activities, as well as ionic conductivity) in combination with the distinctive characteristics of nanofibers (such as a high aspect ratio and 3D architecture). This combination has permitted numerous possibilities, spanning from wound dressings, air and water filters, drug delivery scaffolds, antimicrobial textiles, to energy storage systems and alkaline fuel cells. In this comprehensive review, we examine the preparation methods, properties, and applications of various composite fibers containing quaternized chitosan. The advantages and disadvantages of each method and composition are meticulously summarized, while relevant diagrams and figures illustrate the key findings.

Photoinitiating Systems Based on Anthraquinone Derivatives: Synthesis of Antifouling and Biocide Coatings

Photoinitiating systems combining 2,6-diaminoanthraquinone (AQD), iodonium salt (Iod), and benzyl alcohol derivatives have been developed to efficiently initiate the cationic polymerization of epoxy monomers upon light exposure. Electron spin resonance spin-trapping (ESR ST) experiments, fluorescence investigations, and steady-state photolysis have demonstrated that a dye-sensitized reaction occurs between AQD and the benzyl alcohol derivatives through a hydrogen abstraction mechanism upon light illumination, followed by reduction of Iod. The in situ liberation of protic acids promotes the cationic photopolymerization of epoxy monomers concomitantly with hydrolysis and condensation of the reactive methoxysilanes of an organic-inorganic precursor, for example, 3-glycidyloxypropyltrimethoxysilane (GPTMS). Nanoindentation experiments and scratch resistance tests proved that the resulting GPTMS coatings exhibit very good resistance to brittle fracture and excellent adherence to stainless-steel substrates. Interestingly, antibacterial tests of the GPTMS coatings showed efficient antifouling and biocide properties against E. coli and S. aureus.

Mechanism of Action of Electrospun Chitosan-Based Nanofibers against Meat Spoilage and Pathogenic Bacteria

This study investigates the antibacterial mechanism of action of electrospun chitosan-based nanofibers (CNFs), against Escherichia coli, Salmonella enterica serovar Typhimurium, Staphylococcus aureus and Listeria innocua, bacteria frequently involved in food contamination and spoilage. CNFs were prepared by electrospinning of chitosan and poly(ethylene oxide) (PEO) blends. The in vitro antibacterial activity of CNFs was evaluated and the susceptibility/resistance of the selected bacteria toward CNFs was examined. Strain susceptibility was evaluated in terms of bacterial type, cell surface hydrophobicity, and charge density, as well as pathogenicity. The efficiency of CNFs on the preservation and shelf life extension of fresh red meat was also assessed. Our results demonstrate that the antibacterial action of CNFs depends on the protonation of their amino groups, regardless of bacterial type and their mechanism of action was bactericidal rather than bacteriostatic. Results also indicate that bacterial susceptibility was not Gram-dependent but strain-dependent, with non-virulent bacteria showing higher susceptibility at a reduction rate of 99.9%. The susceptibility order was: E. coli > L. innocua > S. aureus > S. Typhimurium. Finally, an extension of one week of the shelf life of fresh meat was successfully achieved. These results are promising and of great utility for the potential use of CNFs as bioactive food packaging materials in the food industry, and more specifically in meat quality preservation.

Eosin-mediated synthesis of polymer coatings combining photodynamic inactivation and antimicrobial properties

Eosin-derived coatings exhibiting photodynamic bacterial inactivation and antibacterial properties.

Development of photoactivable glycerol-based coatings containing quercetin for antibacterial applications

Synthesis of antibacterial coatings derived from glycerol and quercetin for the inhibition of bacteria proliferation.

Photoinduced curcumin derivative-coatings with antibacterial properties

Synthesis of antibacterial coatings derived from epoxidized soybean oil and curcumin for the efficient inhibition of bacteria proliferation.

Release and antibacterial activity of allyl isothiocyanate/β-cyclodextrin complex encapsulated in electrospun nanofibers

Allyl isothiocyanate (AITC) is known as an efficient antibacterial agent but it has a very high volatility. Herein, AITC and AITC/β-cyclodextrin (CD)-inclusion complex (IC) incorporated in polyvinyl alcohol (PVA) nanofibers were produced via electrospinning. SEM images elucidated that incorporation of AITC and AITC/β-CD-IC into polymer matrix did not affect the bead-free fiber morphology of PVA nanofibers. (1)H-NMR and headspace GC-MS analyses revealed that very low amount of AITC was remained in PVA/AITC-NF because of the rapid evaporation of AITC during the electrospinning process. Nevertheless, much higher amount of AITC was preserved in the PVA/AITC/β-CD-IC-NF due to the CD inclusion complexation. The sustained release of AITC from nanofibers was evaluated at 30°C, 50°C and 75°C via headspace GC-MS. When compared to PVA/AITC-NF, PVA/AITC/β-CD-IC-NF has shown higher antibacterial activity against Escherichia coli and Staphylococcus aureus due to the presence of higher amount of AITC in this sample which was preserved by CD-IC.

Emulsion electrospinning as an approach to fabricate PLGA/chitosan nanofibers for biomedical applications

Novel nanofibers from blends of polylactic-co-glycolic acid (PLGA) and chitosan have been produced through an emulsion electrospinning process. The spinning solution employed polyvinyl alcohol (PVA) as the emulsifier. PVA was extracted from the electrospun nanofibers, resulting in a final scaffold consisting of a blend of PLGA and chitosan. The fraction of chitosan in the final electrospun mat was adjusted from 0 to 33%. Analyses by scanning and transmission electron microscopy show uniform nanofibers with homogenous distribution of PLGA and chitosan in their cross section. Infrared spectroscopy verifies that electrospun mats contain both PLGA and chitosan. Moreover, contact angle measurements show that the electrospun PLGA/chitosan mats are more hydrophilic than electrospun mats of pure PLGA. Tensile strengths of 4.94 MPa and 4.21 MPa for PLGA/chitosan in dry and wet conditions, respectively, illustrate that the polyblend mats of PLGA/chitosan are strong enough for many biomedical applications. Cell culture studies suggest that PLGA/chitosan nanofibers promote fibroblast attachment and proliferation compared to PLGA membranes. It can be assumed that the nanofibrous composite scaffold of PLGA/chitosan could be potentially used for skin tissue reconstruction.

Versatile photochemical surface modification of biopolyester microfibrous scaffolds with photogenerated silver nanoparticles for antibacterial activity

A straightforward and versatile method for immobilizing macromolecules and silver nanoparticles on the surface of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) electrospun fibers is developed with the objective of designing a new functional material having significant antibacterial activity. The approach relies on a two-step procedure: UV photografting of poly(methacrylic acid) (PMAA) on the surface of PHBHV fibers according to a "grafting from" method, and complexation of in situ photogenerated silver nanoparticles (Ag NPs) by carboxyl groups from tethered PMAA chains. The photografting process is conducted through a photoinduced free-radical process employing a ketone-based photoinitiator in aqueous medium. Under appropriate conditions, the photogenerated radicals abstract hydrogen atoms from the PHBHV backbone, thus initiating the UV-mediated photopolymerization of MAA from the PHBHV microfibrous surface. The photochemical mechanism of the ketone photolysis is entirely described by the electron spin resonance/spin-trapping technique, and the modified PHBHV microfibrous scaffold is extensively characterized by ATR-FTIR spectroscopy, water contact-angle measurements, and mercury intrusion porosimetry. In a second step, the in situ synthesis of Ag NPs within the microfibrous scaffold is implemented by photoreduction reaction in the presence of both a silver precursor and a photosensitizer. The photoinduced formation of Ag NPs is confirmed by UV spectrophotometry and XPS analysis. SEM and TEM experiments confirm the formation and dispersion of Ag NPs on the surface of the modified fibers. Finally, a primary investigation is conducted to support the antibacterial activity of the new functionalized biomaterial against Staphylococcus aureus and Escherichia coli.