Molecular design, structures, and activity of antimicrobial peptide-mimetic polymers

Near-infrared-guided NO generator for combined NO/photothermal/chemodynamic therapy of bacterial infections

Nitric oxide (NO)-based gas therapy approaches are promising in the treatment of infections; however, these strategies are hindered by poor delivery to the target site, which leads to unsatisfactory effects. In this study, we developed a NO-controlled platform (SCM@HA) via NO-generating mesoporous silica nanoparticles co-doped with sodium nitroprusside and copper sulphide to control NO production under near-infrared (NIR)-laser irradiation. Irradiation with an 808 nm NIR laser rapidly triggered the release of NO from the particles to actualise gas therapy. Photothermal therapy (PTT) also increased the local microenvironment temperature, and the close relationship between chemodynamic therapy (CDT) and temperature suggests that the increasing temperature facilitates in its working. The hydroxyl radicals generated by CDT can destroy the structure of bacteria in acidic environments. The germicidal activity of the nanoparticles was determined by the combined action of PTT, CDT, and NO-based gas therapy. The nanoparticles showed bactericidal activity in vitro against bacterial strains Staphylococcus aureus (S. aureus) and Salmonella typhimurium (S. typhimurium). Finally, the anti-infective efficacy in vivo in S. aureus-infected mouse model was demonstrated. Thus, the synergistic antimicrobial effects of NO-generating silica nanoparticles have good potential for the non-antibiotic treatment of bacterial infections in wounds. STATEMENT OF SIGNIFICANCE: Bacterial infections and resistance are challenging health threats. Therefore, the development of an antibiotic-independent method is essential for the treatment of wound bacterial infections. In this study, NO-generating nanoparticles loaded with sodium nitroprusside in copper sulphide-doped mesoporous silica were prepared to control the long-term release of NO using near-infrared laser, which has good efficacy of PTT and CDT. The bactericidal effects of as-prepared nanoparticles against S. aureus and S. typhimurium have been well elucidated. This study proposes a feasible method in the field of NO-based therapy, thus paving the way that will benefit for the treatment of bacterial infections in wounds.

Biodegradable Block Poly(ester amine)s with Pendant Hydroxyl Groups for Biomedical Applications

The article presents the results of the synthesis and characteristics of the amphiphilic block terpolymers, built of a hydrophilic polyesteramine block, and hydrophobic blocks made of lactidyl and glycolidyl units. These terpolymers were obtained during the copolymerization of L-lactide with glycolide carried out in the presence of previously produced macroinitiators with protected amine and hydroxyl groups. The terpolymers were prepared to produce a biodegradable and biocompatible material containing active hydroxyl and/or amino groups, with strong antibacterial properties and high surface wettability by water. The control of the reaction course, the process of deprotection of functional groups, and the properties of the obtained terpolymers were made based on 1H NMR, FTIR, GPC, and DSC tests. Terpolymers differed in the content of amino and hydroxyl groups. The values of average molecular mass oscillated from about 5000 g/mol to less than 15,000 g/mol. Depending on the length of the hydrophilic block and its composition, the value of the contact angle ranged from 50° to 20°. The terpolymers containing amino groups, capable of forming strong intra- and intermolecular bonds, show a high degree of crystallinity. The endotherm responsible for the melting of L-lactidyl semicrystalline regions appeared in the range from about 90 °C to close to 170 °C, with a heat of fusion from about 15 J/mol to over 60 J/mol.

Development of lipidated polycarbonates with broad-spectrum antimicrobial activity

Antimicrobial resistance is a global challenge owing to the lack of discovering effective antibiotic agents. Antimicrobial polymers containing the cationic groups and hydrophobic groups which mimic natural host-defense peptides (HDPs) show great promise in combating bacteria. Herein, we report the synthesis of lipidated polycarbonates bearing primary amino groups and hydrophobic moieties (including both the terminal long alkyl chain and hydrophobic groups in the sequences) by ring-opening polymerization. The hydrophobic/hydrophilic group ratios were adjusted deliberately and the lengths of the alkyl chains at the end of the polymers were modified to achieve the optimized combination for the lead polymers, which exhibited potent and broad-spectrum bactericidal activity against a panel of Gram-positive and Gram-negative bacteria. The polymers only showed very limited hemolytic activity, demonstrating their excellent selectivity. Comprehensive analyses using biochemical and biophysical assays revealed the strong interaction between the polymers and bacteria membranes. Moreover, the polymers also showed strong biofilm inhibition activity and did not readily induce antibiotic resistance. Our results suggest that lipidated polycarbonates could be a new class of antimicrobial agents.

On-Demand Changeable Theranostic Hydrogels and Visual Imaging-Guided Antibacterial Photodynamic Therapy to Promote Wound Healing

Antibacterial wound dressings are confronted with the challenges in real-time imaging of infected wounds and effective removal of bacterial debris after sterilization to promote the healing process. Herein, injectable theranostic hydrogels were constructed from antimicrobial peptide ε-polylysine (ePL) and polydopamine (PDA) nanoparticles for real-time diagnosis of infected wounds, imaging-guided antibacterial photodynamic therapy (PDT), and on-demand removal of bacterial debris. Ureido-pyrimidinone was conjugated on ePL to produce PLU hydrogels through quadruple hydrogen bonding, and the inoculation of tetrakis(4-carboxyphenyl)porphyrin (TCPP)-loaded PDA (PTc) nanoparticles introduced Schiff base linkages in PLU@PTc hydrogels. The double-cross-linked networks enhance mechanical performance, adhesion strength, and self-healing properties of hydrogels, and the dynamic cross-linking enables their photothermal removal. The injection of PLU precursors and PTc NPs generates in situ sol-gel transformation, and the acid-triggered release of TCPP restores fluorescence emissions for real-time imaging of infected wounds under 410 nm illumination. Then, the released TCPP in the infected wounds is illuminated at 660 nm to launch a precise antibacterial PDT, which is strengthened by the bacterial capture on hydrogels. Hydrogels with wrapped bacterial debris are removed under illumination at 808 nm, and the hydrogel dressing change accelerates healing of infected wounds through simultaneous relief of oxidative stress, regulation of inflammatory factors, acceleration of collagen deposition, and promotion of angiogenesis. Thus, this study demonstrates a feasible strategy for wound infection theranostics through bacterial infection-triggered visual imaging, efficient nonantibiotic sterilization, and on-demand dressing change and bacterial debris removal.

Effects of Hydrophobicity on Antimicrobial Activity, Selectivity, and Functional Mechanism of Guanidinium-Functionalized Polymers

In this study, a series of guanidinium-functionalized polycarbonate random co-polymers is prepared from organocatalytic ring-opening polymerization to investigate the effect of the hydrophobic side chain (ethyl, propyl, isopropyl, benzyl, and hexyl) on their antimicrobial activity and selectivity. Although the polymers exhibit similar minimum inhibitory concentrations, the more hydrophobic polymers exhibit a faster rate of bacteria elimination. At higher percentage content (20 mol%), polymers with more hydrophobic side chains suffer from poor selectivity due to their high hemolytic activity. The highly hydrophobic co-polymer, containing the hydrophobic hexyl-functionalized cyclic carbonate, kills bacteria via a membrane-disruptive mechanism. Micelle formation leads to a lower extent of membrane disruption. This study unravels the effects of hydrophobic side chains on the activities of the polymers and their killing mechanism, providing insights into the design of new antimicrobial polymers.

Mechanism of Action and Resistance Evasion of an Antimicrobial Oligomer against Multidrug-Resistant Gram-Negative Bacteria

The last resort for treating multidrug-resistant (MDR) Pseudomonas aeruginosa and other MDR Gram-negative bacteria is a class of antibiotics called the polymyxins; however, polymyxin-resistant isolates have emerged. In response, antimicrobial peptides (AMPs) and their synthetic mimetics have been investigated as alternative therapeutic options. Oligothioetheramides (oligoTEAs) are a class of synthetic, sequence-defined oligomers composed of N-allylacrylamide monomers and an abiotic dithiol backbone that is resistant to serum degradation. Characteristic of other AMP mimetics, the precise balance between charge and hydrophobicity has afforded cationic oligoTEAs potent antimicrobial activity, particularly for the compound BDT-4G, which consists of a 1,4-butanedithiol backbone and guanidine pendant groups, the latter of which provides a cationic charge at physiological pH. However, the activity and mechanism of cationic oligoTEAs against MDR Gram-negative isolates have yet to be fully investigated. Herein, we demonstrated the potent antimicrobial activity of BDT-4G against clinical isolates of P. aeruginosa with a range of susceptibility profiles, assessed the kinetics of bactericidal activity, and further elucidated its mechanism of action. Activity was also evaluated against a panel of polymyxin-resistant isolates, including intrinsically-resistant species. We demonstrate that BDT-4G can evade some of the mechanisms conferring resistance to polymyxin B and thus may have therapeutic potential.

Photoactivated Release of Nitric Oxide and Antimicrobial Peptide Derivatives for Synergistic Therapy of Bacterial Skin Abscesses

It is of paramount importance to develop novel approaches for combating bacterial resistance and the integration of different antibacterial mechanisms is essential to achieve synergistic bactericidal efficiency while reducing the associated side effects. Herein, amphiphilic antimicrobial copolymers derived from poly-l-lysine (PLL), black phosphorus quantum dots (BPQDs) as near-infrared (NIR) sensitizer, and S-nitrosocysteamine (SNO) as nitric oxide (NO) donor, are assembled into PELI@BPQD-SNO nanoparticles through electrostatic interactions. Amphiphilic copolymers with isopentanyl grafts on PLL at a ratio of 50% achieve an optimal balance between antibacterial activity and hemolysis rate. Photothermal effect of BPQDs leads to NIR-responsive release of NO and the combination with amphiphilic copolymers mutually enhances long-term inhibition of bacterial growth. In an S. aureus-infected subcutaneous abscess model, the bactericidal rate of PELI@BPQD-SNO/NIR treatment reaches nearly 99.6%, which is significantly higher than those without NO release (38%) or amphiphilic copolymers (24%) or NIR irradiation (17%). PELI@BPQD-SNO/NIR treatment shows full recovery of infected wounds, efficient retardation of inflammatory cells, and reconstruction of blood vessels similar to those of healthy skin. Therefore, the electrostatic assembly demonstrates a promising strategy to deliver charged therapeutic agents and the photoactivated release of NO and amphiphilic copolymers achieves synergistic antibacterial efficacy without using any antibiotics.

Antimicrobial activities of amphiphilic cationic polymers and their efficacy of combination with novobiocin

Today, drug-resistant bacteria represent a significant problem worldwide. In fact, bacteria are becoming resistant even to newly developed antibiotics. Therefore, there is an urgent need to develop antibiotics to which bacteria cannot become resistant. In this study, antimicrobial polymers to which bacteria cannot develop resistance were prepared from 6-aminohexyl methacrylamide and N-isopropyl acrylamide. The polymers with molecular weights of the order of 10⁵ showed little antimicrobial activity against Staphylococcus aureus and Escherichia coli as well as low toxicity. On the other hand, polymers with lower molecular weights (of the order of 10⁴) did show antimicrobial activity against S. aureus and E. coli. These polymers were combined with novobiocin to investigate the combined usage effects against E. coli. The combined usage of novobiocin and the low-molecular-weight polymers reduced the minimum inhibitory concentration, which was less than 0.0625 μg/mL against E. coli. This result indicates that the combination is useful for increasing the efficacy of antibiotics and broadening their antimicrobial spectrum. Furthermore, the results showed the possibility that the antimicrobial polymers serve not only as antibiotics to which bacteria have not developed resistance but also as adjuvants for other antibiotics.

The Potential of Modified and Multimeric Antimicrobial Peptide Materials as Superbug Killers

Antimicrobial peptides (AMPs) are found in nearly all living organisms, show broad spectrum antibacterial activity, and can modulate the immune system. Furthermore, they have a very low level of resistance induction in bacteria, which makes them an ideal target for drug development and for targeting multi-drug resistant bacteria 'Superbugs'. Despite this promise, AMP therapeutic use is hampered as typically they are toxic to mammalian cells, less active under physiological conditions and are susceptible to proteolytic degradation. Research has focused on addressing these limitations by modifying natural AMP sequences by including e.g., d-amino acids and N-terminal and amino acid side chain modifications to alter structure, hydrophobicity, amphipathicity, and charge of the AMP to improve antimicrobial activity and specificity and at the same time reduce mammalian cell toxicity. Recently, multimerisation (dimers, oligomer conjugates, dendrimers, polymers and self-assembly) of natural and modified AMPs has further been used to address these limitations and has created compounds that have improved activity and biocompatibility compared to their linear counterparts. This review investigates how modifying and multimerising AMPs impacts their activity against bacteria in planktonic and biofilm states of growth.

Human neutrophil peptide 1 promotes immune sterilization in vivo by reducing the virulence of multidrug-resistant Klebsiella pneumoniae and increasing the ability of macrophages

By studying the expression in patients and cell modeling in vitro, antimicrobial peptides for Klebsiella were screened. Killing curve and membrane permeability experiments are used to study the antibacterial effect of antimicrobial peptides in vitro. Cytotoxicity-related indicators including lipopolysaccharide (LPS), capsule polysaccharide (CPS), and outer membrane protein expression were measured. Intranasal inoculation of pneumoconiosis was used to construct a mouse infection model, and the survival rate and cytokine expression level were tested. Human neutrophil peptide 1 (HNP-1) showed a significant antibacterial effect, which improved the permeability of the outer membrane of K. pneumoniae. Moreover, HNP-1 decreased LPS, CPS content, and outer membrane proteins. K. pneumoniae infection decreased antimicrobial peptide, oxidative stress, and autophagy-related genes, while HNP-1 increased these genes. After coculture with macrophages, the endocytosis of macrophages is enhanced and the bacterial load is greater in the K. pneumoniae + peptide group. Besides, higher levels of pp38 and pp65 in the K. pneumoniae + peptide group. HNP-1 rescued the cytotoxicity induced by K. pneumoniae. The survival rate is significantly improved after K. pneumoniae is treated by HNP-1. All cytokines in the peptide group were significantly higher. HNP-1 promotes immune sterilization by reducing the virulence of multidrug-resistant K. pneumoniae and increasing the ability of macrophages.

Mechanistic Study of Membrane Disruption by Antimicrobial Methacrylate Random Copolymers by the Single Giant Vesicle Method

Cationic amphiphilic polymers have been a platform to create new antimicrobial materials that act by disrupting bacterial cell membranes. While activity characterization and chemical optimization have been done in numerous studies, there remains a gap in our knowledge on the antimicrobial mechanisms of the polymers, which is needed to connect their chemical structures and biological activities. To that end, we used a single giant unilamellar vesicle (GUV) method to identify the membrane-disrupting mechanism of methacrylate random copolymers. The copolymers consist of random sequences of aminoethyl methacrylate and methyl (MMA) or butyl (BMA) methacrylate, with low molecular weights of 1600-2100 g·mol^-1. GUVs consisting of an 8:2 mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol), sodium salt (POPG) and those with only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were prepared to mimic the bacterial (Escherichia coli) or mammalian membranes, respectively. The disruption of bacteria and mammalian cell membrane-mimetic lipid bilayers in GUVs reflected the antimicrobial and hemolytic activities of the copolymers, suggesting that the copolymers act by disrupting cell membranes. The copolymer with BMA formed pores in the lipid bilayer, while that with MMA caused GUVs to burst. Therefore, we propose that the mechanism is inherent to the chemical identity or properties of hydrophobic groups. The copolymer with MMA showed characteristic sigmoid curves of the time course of GUV burst. We propose a new kinetic model with a positive feedback loop in the insertion of the polymer chains in the lipid bilayer. The novel finding of alkyl-dependent membrane-disrupting mechanisms will provide a new insight into the role of hydrophobic groups in the optimization strategy for antimicrobial activity and selectivity.

Surface decoration of black phosphorus nanosheets to generate oxygen and release 1O2 for photodynamic killing of bacteria

Photodynamic therapy (PDT) has evolved as an essential method for infection control, but is confronted with challenges in terms of low oxygen supply, possible toxicity during light irradiation, and nonpersistent action. Herein, to address these limitations, black phosphorus (BP) is used as a photosensitizer and decorated with Pt nanoparticles and aminobenzyl-2-pyridone (APy) moieties to obtain BP@APy-Pt. The stability of BP is improved through the capture and occupation of lone-pair electrons after reductive deposition of Pt nanoparticles and covalent conjugation of APy. Pt nanoparticles on BP@APy-Pt catalyze the decomposition of endogenous H₂O₂ to produce oxygen for consecutive cycles with a stable production capacity. The light exposure to BP@APy-Pt generates significantly higher ¹O₂ levels than those of BP/light, and the generated ¹O₂ is partially captured by APy moieties. The captured ¹O₂ during 20 min of illumination shows a constant release for 24 h in the dark. The cycled storage and release feature eliminates the toxicity of ¹O₂ at high levels during illumination and leads to efficient destruction of S. aureus and P. aeruginosa. Compared to the healing rates after treatment with BP/light (57.6%), BP@Pt/light (64.8%), BP@APy/light (77.8%), and BP@APy-Pt (48.5%), the skin wounds with infected S. aureus are fully healed after BP@APy-Pt/light treatment. Blood vessels and hair follicles are regenerated to resemble those of normal skin. Thus, this study expands the PDT strategy through integration with oxygen generation, ¹O₂ storage, and persistent release to promote bactericidal efficacy and eliminate side effects.

Unexpected Enhancement of Antimicrobial Polymer Activity against Staphylococcus aureus in the Presence of Fetal Bovine Serum

Cationic and amphiphilic polymers are known to exert broad-spectrum antibacterial activity by a putative mechanism of membrane disruption. Typically, nonspecific binding to hydrophobic components of the complex biological milieu, such as globular proteins, is considered a deterrent to the successful application of such polymers. To evaluate the extent to which serum deactivates antibacterial polymethacrylates, we compared their minimum inhibitory concentrations in the presence and absence of fetal bovine serum. Surprisingly, we discovered that the addition of fetal bovine serum (FBS) to the assay media in fact enhances the antimicrobial activity of polymers against Gram-positive bacteria S. aureus, whereas the opposite is the case for Gram-negative E. coli. Here, we present these unexpected trends and develop a hypothesis to potentially explain this unusual phenomenon.

Regiospecific vs. non regiospecific click azide-alkyne polymerization: In vitro study of water-soluble antibacterial poly(amide aminotriazole)s

Novel linear cationic poly(amide aminotriazole)s (PATnD) with secondary amine groups in the backbone were obtained by using azide-alkyne 1,3-dipolar cycloaddition reactions: metal- and solvent-free (thermal conditions, PATTnD) or copper(I)-catalyzed (Sharpless conditions, PATCnD). PATnD were investigated in vitro against strains of E. coli, P. aeruginosa, S. aureus, and S. epidermidis. Hemolytic activity was tested using human red blood cells (hRBC), and very low or no hemolytic activity was observed. The cytotoxicity of PATnD polymers against Human Gingival Fibroblasts (HGnF) cells was concentration-dependent, and significant differences between PATT1D and PATC1D were observed. The ability of these polymers to induce resistance against both Gram-positive and Gram-negative bacteria was also assessed. Studied bacterial strains acquired resistance to catalytic polymers (PATCnD) in initial passages meanwhile resistance to thermal polymers (PATTnD) appears in later passages, being the increase of the minimum inhibitory concentration lower than in catalytic polymers. This result, together with the higher biocidal capacity of thermal polymers compared to catalytic ones, seems to suggest an influence of the regiospecificity of the polymers on their antibacterial characteristics. This study also demonstrates that PAT1D polymers, which do not appear to have strong hydrophobic residues, can exert significant antimicrobial activity against Gram-positive bacteria such as S. epidermidis. This pair of polymers, PATC1D and PATT1D, displays the greatest antimicrobial activity while not causing significant hemolysis along with the lowest susceptibility for resistance development of the polymers evaluated.

Synthetic Biomimetic Polymethacrylates: Promising Platform for the Design of Anti-Cyanobacterial and Anti-Algal Agents

Extensive, uncontrolled growth of algae and cyanobacteria is an environmental, public health, economic, and technical issue in managing natural and engineered water systems. Synthetic biomimetic polymers have been almost exclusively considered antimicrobial alternatives to conventional antibiotics to treat human bacterial infections. Very little is known about their applicability in an aquatic environment. Here, we introduce synthetic biomimetic polymethacrylates (SBPs) as a cost-effective and chemically facile, flexible platform for designing a new type of agent suitable for controlling and mitigating photosynthetic microorganisms. Since SBPs are cationic and membranolytic in heterotrophic bacteria, we hypothesized they could also interact with negatively charged cyanobacterial or algal cell walls and membranes. We demonstrated that SBPs inhibited the growth of aquatic photosynthetic organisms of concern, i.e., cyanobacteria (Microcystis aeruginosa and Synechococcus elongatus) and green algae (Chlamydomonas reinhardtii and Desmodesmus quadricauda), with 50% effective growth-inhibiting concentrations ranging between 95 nM and 6.5 μM. Additionally, SBPs exhibited algicidal effects on C. reinhardtii and cyanocidal effects on picocyanobacterium S. elongatus and microcystin-producing cyanobacterium M. aeruginosa. SBP copolymers, particularly those with moderate hydrophobic content, induced more potent cyanostatic and cyanocidal effects than homopolymers. Thus, biomimetic polymers are a promising platform for the design of anti-cyanobacterial and anti-algal agents for water treatment.

Applications of Discrete Synthetic Macromolecules in Life and Materials Science: Recent and Future Trends

In the last decade, the field of sequence-defined polymers and related ultraprecise, monodisperse synthetic macromolecules has grown exponentially. In the early stage, mainly articles or reviews dedicated to the development of synthetic routes toward their preparation have been published. Nowadays, those synthetic methodologies, combined with the elucidation of the structure-property relationships, allow envisioning many promising applications. Consequently, in the past 3 years, application-oriented papers based on discrete synthetic macromolecules emerged. Hence, material science applications such as macromolecular data storage and encryption, self-assembly of discrete structures and foldamers have been the object of many fascinating studies. Moreover, in the area of life sciences, such structures have also been the focus of numerous research studies. Here, it is aimed to highlight these recent applications and to give the reader a critical overview of the future trends in this area of research.

Recent advances in design of antimicrobial peptides and polypeptides toward clinical translation

The recent outbreaks of infectious diseases caused by multidrug-resistant pathogens have sounded a piercing alarm for the need of new effective antimicrobial agents to guard public health. Among different types of candidates, antimicrobial peptides (AMPs) and the synthetic mimics of AMPs (SMAMPs) have attracted significant enthusiasm in the past thirty years, due to their unique membrane-active antimicrobial mechanism and broad-spectrum antimicrobial activity. The extensive research has brought many drug candidates into clinical and pre-clinical development. Despite tremendous progresses have been made, several major challenges inherent to current design strategies have slowed down the clinical translational development of AMPs and SMAMPs. However, these challenges also triggered many efforts to redesign and repurpose AMPs. In this review, we will first give an overview on AMPs and their synthetic mimics, and then discuss the current status of their clinical translation. Finally, the recent advances in redesign and repurposing AMPs and SMAMPs are highlighted.

Polymeric approach to combat drug-resistant methicillin-resistant Staphylococcus aureus

ABSTRACT

The current global death rate has threatened humans due to increase in deadly unknown infections caused by pathogenic microorganisms. On the contrary, the emergence of multidrug-resistant bacteria is also increasing which is leading to elevated lethality rate worldwide. Development of drug-resistant bacteria has become one of the daunting global challenges due to failure in approaching to combat against them. Methicillin-resistant Staphylococcus aureus (MRSA) is one of those drug-resistant bacteria which has led to increase in global mortality rate causing various lethal infections. Polymer synthesis can be one of the significant approaches to combat MRSA by fabricating polymeric coatings to prevent the spread of infections. This review provides last decade information in the development of various polymers against MRSA.

GRAPHICAL ABSTRACT

Antibacterial Amphiphilic Copolymers of Dimethylamino Ethyl Methacrylate and Methyl Methacrylate to Control Biofilm Adhesion for Antifouling Applications

Amphiphilic copolymers are recognized as important biomaterials and used as antibacterial agents due to their effective inhibition of bacterial growth. In current study, the amphiphilic copolymers of P(DMAEMA-co-MMA) were synthesized using free radical polymerization by varying the concentrations of hydrophilic monomer 2-dimethylamino ethylmethacrylate (DMAEMA) and hydrophobic monomer methyl methacrylate (MMA) having PDI value of 1.65-1.93. The DMAEMA monomer, through ternary amine with antibacterial property optimized copolymers, P(DMAEMA-co-MMA), compositions to control biofilm adhesion. Antibacterial activity of synthesized copolymers was elucidated against Gram-positive Staphylococcus aureus (ATCC 6538) and Gram-negative Escherchia coli (ATCC 8739) by disk diffusion method, and zones of inhibition were measured. The desired composition that was PDM1 copolymer had shown good zones of inhibition i.e., 19 ± 0.33 mm and 20 ± 0.33 mm for E. coli and S. aureus respectively. The PDM1 and PDM2 have exhibited significant control over bacterial biofilm adhesion as tested by six well plate method. SEM study of bacterial biofilm formation has illustrated that these copolymers act in a similar fashion like cationic biocide. These compositions viz. PDM1 and PDM2, may be useful in development of bioreactors, sensors, surgical equipment and drug delivery devices.

Incorporation of Poly(Itaconic Acid) with Quaternized Thiazole Groups on Gelatin-Based Films for Antimicrobial-Active Food Packaging

Poly(itaconic acid) (PIA) was synthesized via conventional radical polymerization. Then, functionalization of PIA was carried out by an esterification reaction with the heterocyclic groups of 1,3-thiazole and posterior quaternization by N-alkylation reaction with iodomethane. The modifications were confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (1H-NMR), as well as ζ-potential measurements. Their antimicrobial activity was tested against different Gram-negative and Gram-positive bacteria. After characterization, the resulting polymers were incorporated into gelatin with oxidized starch and glycerol as film adjuvants, and dopamine as crosslinking agent, to develop antimicrobial-active films. The addition of quaternized polymers not only improved the mechanical properties of gelatin formulations, but also decreased the solution absorption capacity during the swelling process. However, the incorporation of synthesized polymers increased the deformation at break values and the water vapor permeability of films. The antioxidant capacity of films was confirmed by radical scavenging ability and, additionally, those films exhibited antimicrobial activity. Therefore, these films can be considered as good candidates for active packaging, ensuring a constant concentration of the active compound on the surface of the food, increasing products' shelf-life and reducing the environmental impact generated by plastics of petrochemical origin.

Investigation of the Role of Aromatic Residues in the Antimicrobial Peptide BuCATHL4B

BACKGROUND

Antimicrobial Peptides (AMPs) are an attractive alternative to traditional small molecule antibiotics as AMPs typically target the bacterial cell membrane. A Trp-rich peptide sequence derived from water buffalo (Bubalus bubalis), BuCATHL4B was previously identified as a broad-spectrum antimicrobial peptide.

OBJECTIVE

In this work, native Trp residues were replaced with other naturally occurring aromatic amino acids to begin to elucidate the importance of these residues on peptide activity.

METHODS

Minimal Inhibitory Concentration (MIC) results demonstrated activity against seven strains of bacteria. Membrane and bilayer permeabilization assays were performed to address the role of bilayer disruption in the activity of the peptides. Lipid vesicle binding and quenching experiments were also performed to gain an understanding of how the peptides interacted with lipid bilayers.

RESULTS

MIC results indicate the original, tryptophan-rich sequence, and the phenylalanine substituted sequences exhibit strong inhibition of bacterial growth. In permeabilization assays, peptides with phenylalanine substitutions have higher levels of membrane permeabilization than those substituted with tyrosine. In addition, one of the two-tyrosine substituted sequence, YWY, behaves most differently in the lowest antimicrobial activity, showing no permeabilization of bacterial membranes. Notably the antimicrobial activity is inherently species dependent, with varying levels of activity against different bacteria.

CONCLUSION

There appears to be little correlation between membrane permeabilization and activity, indicating these peptides may have additional mechanisms of action beyond membrane disruption. The results also identify two sequences, denoted FFF and YYW, which retain antibacterial activity but have markedly reduced hemolytic activity.

A quinine-based quaternized polymer: a potent scaffold with bactericidal properties without resistance

A quinine-based quaternized polymer confers bactericidal efficacy by destroying the membrane structure of bacteria.

Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior

Several hydrogels based on 2-hydroxyethyl methacrylate and a methacrylic monomer containing a thiazole group in its lateral chain have been prepared by thermal polymerization at 60 °C in water solution varying the chemical composition of the gels. The posterior quaternization of the thiazole groups with methyl iodine has rendered positively charged hydrogels with potential antimicrobial activity. This modification has been structurally characterized by infrared spectroscopy, whereas the thermal stability of all hydrogels has been studied by thermal degradation in inert atmosphere. The swelling behavior in distilled water and the rheology of the different hydrogels have been analyzed as a function of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) monomer content as well as its methylation. Finally, the active character of hydrogels against Gram-positive and Gram-negative bacteria and fungi has been evaluated, revealing excellent antimicrobial activity against all tested microorganisms. The methylated hydrogels could be used as potential materials for wound healing or contact lens applications.

Biodegradable Polymeric Micro/Nano-Structures with Intrinsic Antifouling/Antimicrobial Properties: Relevance in Damaged Skin and Other Biomedical Applications

Bacterial colonization of implanted biomedical devices is the main cause of healthcare-associated infections, estimated to be 8.8 million per year in Europe. Many infections originate from damaged skin, which lets microorganisms exploit injuries and surgical accesses as passageways to reach the implant site and inner organs. Therefore, an effective treatment of skin damage is highly desirable for the success of many biomaterial-related surgical procedures. Due to gained resistance to antibiotics, new antibacterial treatments are becoming vital to control nosocomial infections arising as surgical and post-surgical complications. Surface coatings can avoid biofouling and bacterial colonization thanks to biomaterial inherent properties (e.g., super hydrophobicity), specifically without using drugs, which may cause bacterial resistance. The focus of this review is to highlight the emerging role of degradable polymeric micro- and nano-structures that show intrinsic antifouling and antimicrobial properties, with a special outlook towards biomedical applications dealing with skin and skin damage. The intrinsic properties owned by the biomaterials encompass three main categories: (1) physical–mechanical, (2) chemical, and (3) electrostatic. Clinical relevance in ear prostheses and breast implants is reported. Collecting and discussing the updated outcomes in this field would help the development of better performing biomaterial-based antimicrobial strategies, which are useful to prevent infections.

Synthetic macromolecules as therapeutics that overcome resistance in cancer and microbial infection

Synthetic macromolecular antimicrobials have shown efficacy in the treatment of multidrug resistant (MDR) pathogens. These synthetic macromolecules, inspired by Nature's antimicrobial peptides (AMPs), mitigate resistance by disrupting microbial cell membrane or targeting multiple intracellular proteins or genes. Unlike AMPs, these polymers are less prone to degradation by proteases and are easier to synthesize on a large scale. Recently, various studies have revealed that cancer cell membrane, like that of microbes, is negatively charged, and AMPs can be used as anticancer agents. Nevertheless, efforts in developing polymers as anticancer agents has remained limited. This review highlights the recent advancement in the development of synthetic biodegradable antimicrobial polymers (e.g. polycarbonates, polyesters and polypeptides) and anticancer macromolecules including peptides and polymers. Additionally, strategies to improve their in vivo bioavailability and selectivity towards bacteria and cancer cells are examined. Lastly, future perspectives, including use of artificial intelligence or machine learning, in the development of antimicrobial and anticancer macromolecules are discussed.

Little Antimicrobial Peptides with Big Therapeutic Roles

Antimicrobial Peptides (AMPs) are short amphipathic biological molecules generally with less than 100 amino acids. AMPs not only present high bioactivities against bacteria, fungi or protists-induced infections, but also play important roles in anticancer activity, immune response and inflammation regulation. AMPs are classified as ribosomally synthesized, non-ribosomally synthesized and post-translationally modified, non-ribosomally synthesized ones and several synthetic or semisynthetic peptides according to their synthesis with or without the involvement of ribosomes. The molecular characterization and bioactivity action mechanisms are summarized for several ribosomally synthesized AMPs and main non-ribosomally synthesized members (cyclopeptides, lipopeptides, glycopeptides, lipoglycopeptides). We also analyze challenges and new strategies to overcome drug resistance and application limitations for AMP discovery. In conclusion, the growing novel small molecular AMPs have huge therapeutic potentials of antibacterial, antiviral, anticancer and immunoregulatory bioactivities through new techniquesdriven drug discovery strategy including bioinformatics prediction, de novo rational design and biosynthesis.

Recent Advances and Future Prospects on Adaptive Biomaterials for Antimicrobial Applications

Bacterial infection is becoming the biggest threat to human health. The scenario is partly due to the ineffectiveness of the conventional antibiotic treatments against the emergence of multidrug-resistant bacteria and partly due to the bacteria living in biofilms or cells. Adaptive biomaterials can change their physicochemical properties in the microenvironment of bacterial infection, thereby facilitating either their interactions with bacteria or drug release. The trends in treating bacterial infections using adaptive biomaterials-based systems are flourishing and generate innumerous possibility to design novel antimicrobial therapeutics. This feature article aims to summarize the recent developments in the formulations, mechanisms, and advances of adaptive materials in bacterial infection diagnosis, contact killing of bacteria, and antimicrobial drug delivery. Also, the challenges and limitations of current antimicrobial treatments based on adaptive materials and their clinical and industrial future prospects are discussed.

Antimicrobial Polymers: The Potential Replacement of Existing Antibiotics?

Antimicrobial resistance is now considered a major global challenge; compromising medical advancements and our ability to treat infectious disease. Increased antimicrobial resistance has resulted in increased morbidity and mortality due to infectious diseases worldwide. The lack of discovery of novel compounds from natural products or new classes of antimicrobials, encouraged us to recycle discontinued antimicrobials that were previously removed from routine use due to their toxicity, e.g., colistin. Since the discovery of new classes of compounds is extremely expensive and has very little success, one strategy to overcome this issue could be the application of synthetic compounds that possess antimicrobial activities. Polymers with innate antimicrobial properties or that have the ability to be conjugated with other antimicrobial compounds create the possibility for replacement of antimicrobials either for the direct application as medicine or implanted on medical devices to control infection. Here, we provide the latest update on research related to antimicrobial polymers in the context of ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp.) pathogens. We summarise polymer subgroups: compounds containing natural peptides, halogens, phosphor and sulfo derivatives and phenol and benzoic derivatives, organometalic polymers, metal nanoparticles incorporated into polymeric carriers, dendrimers and polymer-based guanidine. We intend to enhance understanding in the field and promote further work on the development of polymer based antimicrobial compounds.

Activity and characterization of a pH-sensitive antimicrobial peptide

Antimicrobial peptides (AMPs) have been an area of great interest, due to the high selectivity of these molecules toward bacterial targets over host cells and the limited development of bacterial resistance to these molecules throughout evolution. Previous work showed that when Histidine was incorporated into the peptide C18G it lost antimicrobial activity. The role of pH on activity and biophysical properties of the peptide was investigated to explain this phenomenon. Minimal inhibitory concentration (MIC) results demonstrated that decreased media pH increased antimicrobial activity. Trichloroethanol (TCE) quenching and red-edge excitation spectroscopy (REES) showed a clear pH dependence on peptide aggregation in solution. Trp fluorescence was used to monitor binding to lipid vesicles and demonstrated the peptide binds to anionic bilayers at all pH values tested, however, binding to zwitterionic bilayers was enhanced at pH 7 and 8 (above the His pKa). Dual Quencher Analysis (DQA) confirmed the peptide inserted more deeply in PC:PG and PE:PG membranes, but could insert into PC bilayers at pH conditions above the His pKa. Bacterial membrane permeabilization assays which showed enhanced membrane permeabilization at pH 5 and 6 but vesicle leakage assays indicate enhanced permeabilization of PC and PC:PG bilayers at neutral pH. The results indicate the ionization of the His side chain affects the aggregation state of the peptide in solution and the conformation the peptide adopts when bound to bilayers, but there are likely more subtle influences of lipid composition and properties that impact the ability of the peptide to form pores in membranes.

Responsive and Synergistic Antibacterial Coatings: Fighting against Bacteria in a Smart and Effective Way

Antibacterial coatings that eliminate initial bacterial attachment and prevent subsequent biofilm formation are essential in a number of applications, especially implanted medical devices. Although various approaches, including bacteria-repelling and bacteria-killing mechanisms, have been developed, none of them have been entirely successful due to their inherent drawbacks. In recent years, antibacterial coatings that are responsive to the bacterial microenvironment, that possess two or more killing mechanisms, or that have triggered-cleaning capability have emerged as promising solutions for bacterial infection and contamination problems. This review focuses on recent progress on three types of such responsive and synergistic antibacterial coatings, including i) self-defensive antibacterial coatings, which can "turn on" biocidal activity in response to a bacteria-containing microenvironment; ii) synergistic antibacterial coatings, which possess two or more killing mechanisms that interact synergistically to reinforce each other; and iii) smart "kill-and-release" antibacterial coatings, which can switch functionality between bacteria killing and bacteria releasing under a proper stimulus. The design principles and potential applications of these coatings are discussed and a brief perspective on remaining challenges and future research directions is presented.

Functional cationic derivatives of starch as antimicrobial agents

Antimicrobial polymers with a broad spectrum of action and high selectivity towards pathogens (versus mammalian cells) provide the opportunity to combat infections with only a limited chance of resistance development.

Providing Antibacterial Activity to Poly(2-Hydroxy Ethyl Methacrylate) by Copolymerization with a Methacrylic Thiazolium Derivative

Antimicrobial polymers and coatings are potent types of materials for fighting microbial infections, and as such, they have attracted increased attention in many fields. Here, a series of antimicrobial copolymers were prepared by radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), which is widely employed in the manufacturing of biomedical devices, and the monomer 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA), which bears thiazole side groups susceptible to quaternization, to provide a positive charge. The copolymers were further quantitatively quaternized with either methyl or butyl iodide, as demonstrated by nuclear magnetic resonance (NMR) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Then, the polycations were characterized by zeta potential measurements to evaluate their effective charge and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate their thermal properties. The ζ-potential study revealed that the quaternized copolymers with intermediate compositions present higher charges than the corresponding homopolymers. The cationic copolymers showed greater glass transition temperatures than poly(2-hydroxyethyl methacrylate) (PHEMA), with values higher than 100 °C, in particular those quaternized with methyl iodide. The TGA studies showed that the thermal stability of polycations varies with the composition, improving as the content of HEMA in the copolymer increases. Microbial assays targeting Gram-positive and Gram-negative bacteria confirmed that the incorporation of a low number of cationic units into PHEMA provides antimicrobial character with a minimum inhibitory concentration (MIC) of 128 µg mL-1. Remarkably, copolymers with MTA molar fractions higher than 0.50 exhibited MIC values as low as 8 µg mL-1.

Biocompatible gadolinium oxide nanoparticles as efficient agent against pathogenic bacteria

The inappropriate and surfeit use of antibiotics have generated a hunt for safe and alternative antimicrobial agents against pathogenic bacteria. With the advancement in nanoscience and nanotechnology, promising opportunities for examining the bacterial effect of metal nanoparticles were demonstrated in literature. Focusing on this, our present study presentssynthesis of l-ascorbic coated gadolinium oxide nanoparticles via a simple precipitation route. Their complete characterization and detailed stability studies were carried out. The obtained nanoparticles were characterized by Fourier transform infrared (FT-IR) spectroscopy, confirming that l-ascorbic acid onto the surface of nanoparticles. The size and morphology were analyzed by Transmission electron Microcopy (TEM) and Field emission scanning electron microscopy (FE-SEM) which reveals their spherical nature. The stability studies were performed to know about their chemical and colloidal stability. The synthesized nanoparticles were found to be non-toxic to HaCaT cells upto the concentration of 125 µg/mL. The antimicrobial effect of nanoparticles was analyzed against three bacterial strains; E. coli, S. aureus and S. typhimurium. To summarize, the synthesized nanoparticles are found to be safe and protective against pathogenic bacteria. They further can be explored in biomedical applications considering their non-toxic nature.