A Mechanochromic Hydrogen-Bonded Rotaxane

A Mechanochromic Rotaxane that Releases Azetidine-Trityl-Maleimide, a Versatile Fluorescent Probe

Force sensing at the molecular level has enabled the study of materials failure and it offers great promises for the investigation of mechanobiological processes. Traditional force probes rely on the reversible or irreversible activation of mechanochromic precursors to assess transient or permanent changes in polymer networks. A promising approach involves force-controlled release of sensing molecules, as the accumulation of chromic molecules at specific sites would enable the recording of deformation histories. However, many fluorescent probes are limited by environmental sensitivity, specific release conditions, or low release efficiency. Maleimide-based dyes, especially amino maleimides, offer a robust alternative due to their small size, structural versatility, and tuneable fluorescence properties. Here, we present a mechanochromic rotaxane device that releases an azetidine-trityl-maleimide (ATM) fluorescent probe via a retro-[4+2] cycloaddition reaction. ATM is a rigidochromic, chemically stable, and environmentally insensitive probe, generated exclusively through rotaxane actuation, underscoring the unique mechanochemical properties of rotaxanes. This device holds potential for applications in material science and biology, such as the investigation of polymer networks and active tissues.

Mechanistically Different Mechanochromophores Enable Calibration and Validation of Molecular Forces in Glassy Polymers and Elastomeric Networks

Sterically distorted donor-acceptor π-systems, termed DA springs, can be progressively planarized under mechanical load causing a bathochromic shift of the photoluminescence (PL) spectrum. By combining theory and experiment, we here use a simple linear force calibration for two different conformational mechanochromophores to determine molecular forces in polymers from the mechanochromic shift in PL wavelength during multiple uniaxial tensile tests. Two systems are used, i) a highly entangled linear glassy polyphenylene and ii) a covalent elastomeric polydimethylsiloxane network. The mean forces estimated by this method are validated using known threshold forces for the mechanochemical ring-opening reactions of two different spiropyran force probes. The agreement between both approaches underlines that these DA springs provide the unique opportunity for the online monitoring of local molecular forces present in diverse polymer matrices.

Polyurethane-Type Poly[3]rotaxanes Synthesized from Cyclodextrin-Based [3]Rotaxane Diol and Diisocyanates

Synthesis of polyurethane-type poly[3]rotaxanes is achieved by polyaddition between a cyclodextrin (CD)-based [3]rotaxane diol and various diisocyanate species, which provide a more defined structure compared to conventional polyrotaxane syntheses. In this study, hydroxyl groups on CDs of [3]rotaxane diol are initially acetylated, and deprotected after the polyaddition to introduce polyurethane backbone structure into polyrotaxane framework. Despite a relatively complicated chemical structure, [3]rotaxane diol monomer is successfully synthesized in a high yield (overall 67%) without any taxing purification process, which is beneficial for practical applications. The polymerization itself proceeds well under a standard polyaddition reaction condition to afford corresponding polyurethanes around 80% yield with Mn > 30 kDa. The poly[3]rotaxanes show different aggregation behavior or optical properties, whether or not acetyl groups are present, and are analyzed by XRD, SEM, and fluorescence measurements.

Force-controlled release of small molecules with a rotaxane actuator

Force-controlled release of small molecules offers great promise for the delivery of drugs and the release of healing or reporting agents in a medical or materials context1-3. In polymer mechanochemistry, polymers are used as actuators to stretch mechanosensitive molecules (mechanophores)4. This technique has enabled the release of molecular cargo by rearrangement, as a direct5,6 or indirect7-10 consequence of bond scission in a mechanophore, or by dissociation of cage11, supramolecular12 or metal complexes13,14, and even by 'flex activation'15,16. However, the systems described so far are limited in the diversity and/or quantity of the molecules released per stretching event1,2. This is due to the difficulty in iteratively activating scissile mechanophores, as the actuating polymers will dissociate after the first activation. Physical encapsulation strategies can be used to deliver a larger cargo load, but these are often subject to non-specific (that is, non-mechanical) release3. Here we show that a rotaxane (an interlocked molecule in which a macrocycle is trapped on a stoppered axle) acts as an efficient actuator to trigger the release of cargo molecules appended to its axle. The release of up to five cargo molecules per rotaxane actuator was demonstrated in solution, by ultrasonication, and in bulk, by compression, achieving a release efficiency of up to 71% and 30%, respectively, which places this rotaxane device among the most efficient release systems achieved so far1. We also demonstrate the release of three representative functional molecules (a drug, a fluorescent tag and an organocatalyst), and we anticipate that a large variety of cargo molecules could be released with this device. This rotaxane actuator provides a versatile platform for various force-controlled release applications.

Two Squares in a Barrel: An Axially Disubstituted Conformationally Rigid Aliphatic Binding Motif for Cucurbit[6]uril

Novel binding motifs suitable for the construction of multitopic guest-based molecular devices (e.g., switches, sensors, data storage, and catalysts) are needed in supramolecular chemistry. No rigid, aliphatic binding motif that allows for axial disubstitution has been described for cucurbit[6]uril (CB6) so far. We prepared three model guests combining spiro[3.3]heptane and bicyclo[1.1.1]pentane centerpieces with imidazolium and ammonium termini. We described their binding properties toward CB6/7 and α-/β-CD using NMR, titration calorimetry, mass spectrometry, and single-crystal X-ray diffraction. We found that a bisimidazolio spiro[3.3]heptane guest forms inclusion complexes with CB6, CB7, and β-CD with respective association constants of 4.0 × 104, 1.2 × 1012, and 1.4 × 102. Due to less hindering terminal groups, the diammonio analogue forms more stable complexes with CB6 (K = 1.4 × 106) and CB7 (K = 3.8 × 1012). The bisimidazolio bicyclo[1.1.1]pentane guest forms a highly stable complex only with CB7 with a K value of 1.1 × 1011. The high selectivity of the new binding motifs implies promising potential in the construction of multitopic supramolecular components.

Aggregation Behavior of Cyclodextrin-Based [3]Rotaxanes

The aggregation of a cyclodextrin (CD)-based [3]rotaxane has been observed and analyzed in detail for the first time in this work. Although the hexagonal packing aggregation of CD-based polyrotaxane is a well known phenomenon, corresponding studies in terms of rotaxanes without any polymer structure have not been conducted so far, probably owing to the difficulty of the molecular design. We synthesized a series of [3]rotaxane species by using a urea-end-capping method and evaluated their aggregation behavior by XRD and SEM measurements. [3]Rotaxane species containing native CD rings showed clear signals assigned to the hexagonal packing by XRD measurement as did polyrotaxane; this proved their aggregation capability. Because the corresponding per-acetylated derivatives did not show this aggregation behavior, the driving force of this aggregation was suggested to be hydrogen bond formation among CD units. The effect of axle end structures and partial acetylation of CDs were also studied.

Catenane and Rotaxane Synthesis from Cucurbit[6]uril-Mediated Azide-Alkyne Cycloaddition

The chemistry of mechanically interlocked molecules (MIMs) such as catenane and rotaxane is full of new opportunities for the presence of a mechanical bond, and the efficient synthesis of these molecules is therefore of fundamental importance in realizing their unique properties and functions. While many different types of preorganizing interactions and covalent bond formation strategies have been exploited in MIMs synthesis, the use of cucurbit[6]uril (CB[6]) in simultaneously templating macrocycle interlocking and catalyzing the covalent formation of the interlocked components is particularly advantageous in accessing high-order catenanes and rotaxanes. In this review, catenane and rotaxane obtained from CB[6]-catalyzed azide-alkyne cycloaddition will be discussed, with special emphasis on the synthetic strategies employed for obtaining complex [n]rotaxanes and [n]catenanes, as well as their properties and functions.

Force-Induced Shuttling of Rotaxanes Controls Fluorescence Resonance Energy Transfer in Polymer Hydrogels

The molecular shuttling function of rotaxanes can be exploited to design mechanoresponsive reporter molecules. Here, we report a new approach to such rotaxane-based mechanophores, in which the fluorescence resonance energy transfer (FRET) between a donor-acceptor pair is mechanically controlled. A cyclic molecule containing a green-light-emitting FRET donor connected to a red-light-emitting FRET acceptor was threaded onto an axle equipped with a quencher at its center and two stoppers in the peripheral positions. In the force-free state, the green emitter is located near the quencher so that charge transfer interactions or photo-induced electron transfer between the two moieties suppress green emission and prevent the FRET from the green to the red emitter. The mechanophore was covalently incorporated into a linear polyurethane-urea (PUU), and stretchable hydrogels were prepared by swelling this polymer with water. Upon deformation of the PUU hydrogels and under an excitation light that selectively excites the donor, the intensity of the red fluorescence increases, as a result of a force-induced separation of the green emitter from the quencher, which enables the FRET. The switching contrast is much more pronounced in the gels than in dry films, which is due to increased molecular mobility and hydrophobic effects in the hydrogel, which both promote the formation of inclusion complexes between the ring containing the green emitter and the quencher.

Conformer Ring Flip Enhances Mechanochromic Performance of ansa-Donor-Acceptor-Donor Mechanochromic Torsional Springs

Mechanochromophores based on conformational changes of donor-acceptor-donor (DAD) springs allow sensing of forces acting on polymer chains by monotonic changes of absorbance or photoluminescence (PL) wavelength. Here, we identify a series of thiophene (D)-flanked quinoxalines (A) as molecular torsional springs for force sensing in bulk polymers at room temperature. The mode of DAD linkage to the polymer matrix and linker rigidity are key parameters that influence the efficacy of force transduction to the DAD spring and thus mechanochromic response, as probed by in situ PL spectroscopy of bulk films during stress-strain experiments. The largest shift of the PL maximum, and thus the highest sensitivity, is obtained from an ansa-DAD spring exhibiting bridged D units and a stiff A linker. Using detailed spectroscopy and density functional theory calculations, we reveal conformer redistribution in the form of a thiophene ring flip as the major part of the overall mechanochromic response. At forces as low as 27 pN at early stages of deformation, the ring flip precedes mechanically induced planarization of the ansa-DAD spring, the latter process producing a PL shift of 21 nm nN^-1. Within the stress-strain diagram, the thiophene ring flip and DAD planarization are thus two separated processes that also cause irreversible and reversible mechanochromic responses, respectively, upon sample failure. As the thiophene ring flip requires much smaller forces than planarization of the DAD spring, such micromechanical motion gives access to sensing of tiny forces and expands both sensitivity and the force range of conformational mechanochromophores.

Visualization of Solvent-Induced Structure Evolution in Cyclodextrin Polyrotaxane Gels

Cyclodextrin (CD)-based polyrotaxanes (PR) are widely used to construct high-mechanical-performance materials because of the high degree of conformational freedom. However, strong hydrogen bonds between CDs greatly limit the application of CD-PR in the preparation of ductile neutral hydrogels. In this work, spiropyrane (SP) into α-CD-based PR is introduced to "visualize" the segment motion of the network in neutral water. The aggregation-induced cohesion and critical factors for the force transmission are disclosed. This system offers a new approach for the fundamental research for the complicated topologically cross-linked structures, which is important for the design of CD-PR-based biocompatible soft materials.

Mechanochemical Organocatalysis: Do High Enantioselectivities Contradict What We Might Expect?

Ball mills input energy to samples by pulverising the contents of the jar. Each impact on the sample or wall of the jar results in an instantaneous transmission of energy in the form of a temperature and pressure increase (volume reduction). Conversely, enantioselective organocatalytic reactions proceed through perceived delicate and well-organised transition states. Does there exist a dichotomy in the idea of enantioselective mechanochemical organocatalysis? This Review provides a survey of the literature reporting the combination of organocatalytic reactions with mechanochemical ball milling conditions. Where possible, direct comparisons of stirred in solution, stirred neat and ball milled processes are drawn with a particular focus on control of stereoselectivity.

Heterocyclic Mechanophores in Polymer Mechanochemistry

This Account covers the recent progress made on heterocyclic mechanophores in the field of polymer mechanochemistry. In particular, the types of such mechanophores as well as the mechanisms and applications of their force-induced structural transformations are discussed and related perspectives and future challenges proposed.

1 Introduction

2 Types of Mechanophores

3 Methods to Incorporate Heterocycle Mechanophores into Polymer Systems

4 Mechanochemical Reactions of Heterocyclic Mechanophores

4.1 Three-Membered-Ring Mechanophores

4.2 Four-Membered-Ring Mechanophores

4.3 Six-Membered-Ring Mechanophores

4.4 Bicyclic Mechanophores

5 Applications

5.1 Cross-Linking of Polymer

5.2 Degradable Polymer

5.3 Mechanochromic Polymer

6 Concluding Remarks and Outlook

Tailoring the Properties of Optical Force Probes for Polymer Mechanochemistry

The correlation of mechanical properties of polymer materials with those of their molecular constituents is the foundation for their holistic comprehension and eventually for improved material designs and syntheses. Over the last decade, optical force probes (OFPs) were developed, shedding light on various unique mechanical behaviors of materials. The properties of polymers are diverse, ranging from soft hydrogels to ultra-tough composites, from purely elastic rubbers to viscous colloidal solutions, and from transparent glasses to super black dyed coatings. Only very recently, researchers started to develop tailored OFP solutions that account for such material requirements in energy (both light and force), in time, and in their spatially detectable resolution. We here highlight notable recent examples and identify future challenges in this emergent field.

Mechanical Force for the Transformation of Aziridine into Imine

Force-selective mechanochemical reactions may be important for applications in polymer mechanochemistry, yet it is difficult to achieve such reactions. This paper reports that cis-N-phthalimidoaziridine incorporated into a macromolecular backbone undergoes migration of N-phthalimido group to afford imine under mechanochemical condition and not thermal one. The imine is further hydrolyzed by water bifurcating into amine and aldehyde. These structural transformations are confirmed by ¹ H NMR and FT-IR spectroscopic analyses. Computational simulations are conducted for the aziridine mechanophore to propose the mechanism of reaction and define the substrate scope of reaction.

Tough Bioinspired Composites That Self-Report Damage

The increasing use of lightweight composite materials in structural applications requires the development of new damage monitoring technologies to ensure their safe use and prevent accidents. Although several molecular strategies have been proposed to report damage in polymers through mechanochromic responses, these approaches have not yet been translated into lightweight bioinspired composites for load-bearing applications. Here, we report on the development of bioinspired laminates of alternating polymer and nacre-like layers that combine optical translucency, high fracture toughness, and damage-reporting capabilities. The composites signal damage via a fluorescence color change that arises from the force activation of mechanophore molecules embedded in the material's polymer phase. A quantitative correlation between the applied strain and the fluorescence intensity was successfully established. We demonstrate that optical imaging of mechanically loaded composites allows for the localized detection of damage prior to fracture. This fluorescence-based self-reporting mechanism offers a promising approach for the early detection of damage in lightweight structural composites and can serve as a useful tool for the analysis of fracture processes in bulk transparent materials.

Mechanochemical Release of Non-Covalently Bound Guests from a Polymer-Decorated Supramolecular Cage

Supramolecular coordination cages show a wide range of useful properties including, but not limited to, complex molecular machine-like operations, confined space catalysis, and rich host-guest chemistries. Here we report the uptake and release of non-covalently encapsulated, pharmaceutically-active cargo from an octahedral Pd cage bearing polymer chains on each vertex. Six poly(ethylene glycol)-decorated bipyridine ligands are used to assemble an octahedral PdII6 (TPT)4 cage. The supramolecular container encapsulates progesterone and ibuprofen within its hydrophobic nanocavity and is activated by shear force produced by ultrasonication in aqueous solution entailing complete cargo release upon rupture, as shown by NMR and GPC analyses.