A mutation in the promoter region of zipA, a component of the divisome, suppresses the shape defect of RodZ-deficient cells

Exploiting latent microbial potentials for producing polyhydroxyalkanoates: A holistic approach

Plastics are versatile, however, nonbiodegradable polymers that are primarily derived from fossil fuels and pose notable environmental challenges. However, biopolymers, such as polyhydroxyalkanoates (PHAs), poly(lactic acid), starch, and cellulose have emerged as sustainable alternatives to conventional plastics. Among these, PHAs stand out as strong contenders as they are completely bio-based and biodegradable and are synthesized by microbes as an energy reserve under stress conditions. Despite their limitations, including low mechanical strength, susceptibility to degradation, a restricted scope of application, and high production costs, biopolymers have promising potential. This review explores strategies for enhancing PHA production to address these challenges, emphasizing the need for sustainable PHA production. These strategies include selecting robust microbial strains and feedstock combinations, optimizing cell biomass and biopolymer yields, genetically engineering biosynthetic pathways, and improving downstream processing techniques. Additives such as plasticizers, thermal stabilizers, and antioxidants are crucial for modifying PHA characteristics, and its processing for achieving the desired balance between processability and end-use performance. By overcoming these complications, biopolymers have become more viable, versatile, and eco-friendly alternatives to conventional plastics, offering hope for a more sustainable future.

Septal wall synthesis is sufficient to change ameba-like cells into uniform oval-shaped cells in Escherichia coli L-forms

A cell wall is required to control cell shape and size to maintain growth and division. However, some bacterial species maintain their morphology and size without a cell wall, calling into question the importance of the cell wall to maintain shape and size. It has been very difficult to examine the dispensability of cell wall synthesis in rod-shaped bacteria such as Escherichia coli for maintenance of their shape and size because they lyse without cell walls under normal culture conditions. Here, we show that wall-less E. coli L-form cells, which have a heterogeneous cell morphology, can be converted to a mostly uniform oval shape solely by FtsZ-dependent division, even in the absence of cylindrical cell wall synthesis. This FtsZ-dependent control of cell shape and size in the absence of a cell wall requires at least either the Min or nucleoid occlusion systems for positioning FtsZ at mid cell division sites.

Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers

The total rate of plastic production is anticipated to surpass 1.1 billion tons per year by 2050. Plastic waste is non-biodegradable and accumulates in natural ecosystems. In 2020, the total amount of plastic waste was estimated to be 367 million metric tons, leading to unmanageable waste disposal and environmental pollution issues. Plastics are produced from petroleum and natural gases. Given the limited fossil fuel reserves and the need to circumvent pollution problems, the focus has shifted to biodegradable biopolymers, such as polyhydroxyalkanoates (PHAs), polylactic acid, and polycaprolactone. PHAs are gaining importance because diverse bacteria can produce them as intracellular inclusion bodies using biowastes as feed. A critical component in PHA production is the downstream processing procedures of recovery and purification. In this review, different bioengineering approaches targeted at modifying the cell morphology and synchronizing cell lysis with the biosynthetic cycle are presented for product separation and extraction. Complementing genetic engineering strategies with conventional downstream processes, these approaches are expected to produce PHA sustainably.

Relationship between the Rod complex and peptidoglycan structure in Escherichia coli

Peptidoglycan for elongation in Escherichia coli is synthesized by the Rod complex, which includes RodZ. Although various mutant strains of the Rod complex have been isolated, the relationship between the activity of the Rod complex and the overall physical and chemical structures of the peptidoglycan have not been reported. We constructed a RodZ mutant, termed RMR, and analyzed the growth rate, morphology, and other characteristics of cells producing the Rod complexes containing RMR. The growth and morphology of RMR cells were abnormal, and we isolated suppressor mutants from RMR cells. Most of the suppressor mutations were found in components of the Rod complex, suggesting that these suppressor mutations increase the integrity and/or the activity of the Rod complex. We purified peptidoglycan from wild-type, RMR, and suppressor mutant cells and observed their structures in detail. We found that the peptidoglycan purified from RMR cells had many large holes and different compositions of muropeptides from those of WT cells. The Rod complex may be a determinant not only for the whole shape of peptidoglycan but also for its highly dense structure to support the mechanical strength of the cell wall.

Enhanced synthesis of alginate oligosaccharides in Pseudomonas mendocina NK-01 by overexpressing MreB

This study aimed to investigate the effects of cytoskeleton protein MreB on bacterial cell morphology and the synthesis of alginate oligosaccharides (AO) and polyhydroxyalkanoate (PHA) by Pseudomonas mendocina NK-01. To overexpress the mreB gene, an expression vector encoding MreB-GFP fusion protein was constructed. The scanning electron microscope (SEM) showed that cells expressing MreB were longer than the wild ones, which agrees with MreB's relationship with the synthesis of peptidoglycan. Cells expressing the MreB-GFP fusion protein emitted green fluorescence under a fluorescence microscope, suggesting that MreB was functionally expressed in strain NK-01. Under a confocal laser scanning microscope, MreB was observed as located around the cell membrane. Furthermore, the recombinant strain could synthesize 0.961 g/L AO, which was 5.86-fold higher than wild-type strain. Through the medium optimization test, we finally selected the addition of 20 g/L glucose as the optimal glycogen addition for AO fermentation based on a high AO yield and high substrate transformation efficiency. The results indicated that overexpression of MreB affected the cell morphology, the activity of AO polymerase, and the efficiency of AO secretion. However, the synthesis of PHA for recombinant strain was slightly reduced. The results suggested that the overexpression of this cytoskeleton protein affected the yield of specific intracellular and extracellular products.

Sensitivity Analysis of Different Shapes of a Plastic Optical Fiber-Based Immunosensor for Escherichia coli: Simulation and Experimental Results

Conventional pathogen detection methods require trained personnel, specialized laboratories and can take days to provide a result. Thus, portable biosensors with rapid detection response are vital for the current needs for in-loco quality assays. In this work the authors analyze the characteristics of an immunosensor based on the evanescent field in plastic optical fibers with macro curvature by comparing experimental with simulated results. The work studies different shapes of evanescent-wave based fiber optic sensors, adopting a computational modeling to evaluate the probes with the best sensitivity. The simulation showed that for a U-Shaped sensor, the best results can be achieved with a sensor of 980 µm diameter by 5.0 mm in curvature for refractive index sensing, whereas the meander-shaped sensor with 250 μm in diameter with radius of curvature of 1.5 mm, showed better sensitivity for either bacteria and refractive index (RI) sensing. Then, an immunosensor was developed, firstly to measure refractive index and after that, functionalized to detect Escherichia coli. Based on the results with the simulation, we conducted studies with a real sensor for RI measurements and for Escherichia coli detection aiming to establish the best diameter and curvature radius in order to obtain an optimized sensor. On comparing the experimental results with predictions made from the modelling, good agreements were obtained. The simulations performed allowed the evaluation of new geometric configurations of biosensors that can be easily constructed and that promise improved sensitivity.

Polar localization of MreB actin is inhibited by anionic phospholipids in the rod-shaped bacterium Escherichia coli

Bacterial actin MreB is required for the maintenance of cell polarity. MreB is located underneath the cell membrane and mainly localizes at a central cylindrical part of the cell. In addition, it has recently been found that anionic phospholipids (aPLs: phosphatidylglycerol and cardiolipin) play a crucial role in excluding MreB from the cell poles. Subcellular localization of MreB is positively and negatively regulated by membrane curvature and aPLs, respectively.

Exclusion of assembled MreB by anionic phospholipids at cell poles confers cell polarity for bidirectional growth

Cell polarity determines the direction of cell growth in bacteria. MreB actin spatially regulates peptidoglycan synthesis to enable cells to elongate bidirectionally. MreB densely localizes in the cylindrical part of the rod cell and not in polar regions in Escherichia coli. When treated with A22, which inhibits MreB polymerization, rod-shaped cells became round and MreB was diffusely distributed throughout the cytoplasmic membrane. A22 removal resulted in restoration of the rod shape. Initially, diffuse MreB started to re-assemble, and MreB-free zones were subsequently observed in the cytoplasmic membrane. These MreB-free zones finally became cell poles, allowing the cells to elongate bidirectionally. When MreB was artificially located at the cell poles, an additional pole was created, indicating that artificial localization of MreB at the cell pole induced local peptidoglycan synthesis. It was found that the anionic phospholipids (aPLs), phosphatidylglycerol and cardiolipin, which were enriched in cell poles preferentially interact with monomeric MreB compared with assembled MreB in vitro. MreB tended to localize to cell poles in cells lacking both aPLs, resulting in production of Y-shaped cells. Their findings indicated that aPLs exclude assembled MreB from cell poles to establish cell polarity, thereby allowing cells to elongate in a particular direction.

A requirement for cell elongation protein RodZ and cell division proteins FtsN and DedD to maintain the small rod morphology of Escherichia coli at growth temperatures near 8°C

As similarly observed in nutrient-poor media at 37°C, Escherichia coli forms small rods in nutrient-rich media at temperatures near 8°C, the minimum temperature of growth. A study was initiated to identify proteins required to facilitate the small rod morphology at low temperature. E. coli contains three nonessential SPOR domain proteins (DamX, RlpA, and DedD) that have been demonstrated to bind to the septal ring. In contrast to the normal growth and small rod morphology of damX and rlpA null mutants at 10°C, the dedD null mutant exhibited reduced growth and formed filamentous cells. The presence of plasmid-encoded DedD restored growth and small rods. Plasmid-encoded FtsN, an essential SPOR domain protein that functions to stabilize the septal ring and to initiate septation, in the dedD null mutant resulted in increased growth and the formation of shorter chained cells. However, plasmid-encoded DedD failed to restore growth and cell division of cells lacking FtsN at 10°C. In contrast to cell division protein DedD, RodZ is a cell elongation protein particularly required for growth at 30°C. However, the rodZ null mutant grew similarly as the wild type strain and produced cocci in LB broth at 10°C. Moreover at 10°C, the concerted deletion of dedD and rodZ resulted in severe inhibition of growth accompanied with the formation of swollen prolate ellipsoids due to a block in septal ring assembly and cell elongation. The data indicate the cellular requirement of both FtsN and DedD for septation as well as RodZ for cell elongation to maintain the small rod morphology at temperatures near 8°C. In comparison to the growth and small rods of the wild type in M9-glucose minimal media at 37°C, the dedD null mutant grew at the same rate and produced elongated cells while the rodZ null mutant grew at a slightly slower rate and produced cocci. The data indicate that DedD and RodZ are also required to maintain the small rod morphology in nutrient-poor media, but there is a higher cellular requirement of DedD for growth and cell division in nutrient-rich media at low temperature.

Escherichia coli inner membrane protein YciB interacts with ZipA that is important for cell division

Escherichia coli propagates by undergoing cycles of lateral elongation, septum formation, and cell fission at the mid-cell. A large number of genes involved in these processes have been identified, but it is likely that others remain. A deletion mutant of yciB (ΔyciB) is shorter in the cell length compared to wild type and, in contrast, over-expression of yciB causes elongation of the cell. Furthermore, the septum localization of ZipA, an essential protein of cell division, is disturbed in a ΔyciB mutant. Purified YciB protein directly interacted with ZipA, which might indicate that YciB is involved in the cell envelope synthesis directed by ZipA in a PBP3-independent manner.

Translation elongation factor EF-Tu modulates filament formation of actin-like MreB protein in vitro

EF-Tu has been shown to interact with actin-like protein MreB and to affect its localization in Escherichia coli and in Bacillus subtilis cells. We have purified YFP-MreB in an active form, which forms filaments on glass slides in vitro and was active in dynamic light-scattering assays, polymerizing in milliseconds after addition of magnesium. Purified EF-Tu enhanced the amount of MreB filaments, as seen by sedimentation assays, the speed of filament formation and the length of MreB filaments in vitro. EF-Tu had the strongest impact on MreB filaments in a 1:1 ratio, and EF-Tu co-sedimented with MreB filaments, revealing a stoichiometric interaction between both proteins. This was supported by cross-linking assays where 1:1 species were well detectable. When expressed in E. coli cells, B. subtilis MreB formed filaments and induced the formation of co-localizing B. subtilis EF-Tu structures, indicating that MreB can direct the positioning of EF-Tu structures in a heterologous cell system. Fluorescence recovery after photobleaching analysis showed that MreB filaments have a higher turnover in B. subtilis cells than in E. coli cells, indicating different filament kinetics in homologous or heterologous cell systems. The data show that MreB can direct the localization of EF-Tu in vivo, which in turn positively affects the formation and dynamics of MreB filaments. Thus, EF-Tu is a modulator of the activity of a bacterial actin-like protein.

[Regulation of determination of bacterial shape]

Bacteria show various cell shape such as round, rod, helical, and so on. However, each bacterium has its own shape and their length and width are kept in a narrow range in a population. Abnormal cell shape often results in death of the cells. Therefore, it is important to maintain their shape. Rod-shaped bacterium Escherichia coli needs to regulate cell polarity, length and width in order to form rod shape. Bacterial shape is genetically regulated. Especially, MreB, a bacterial actin, and its interacting proteins are involved in the regulation. We have identified rodZ as a novel cell shape determinant and have been analyzing RodZ protein in the past few years. The rodZ mutant is round. We isolated suppressor mutants of the rodZ mutant. The shape of the suppressors was rod shape. By analyzing the rodZ mutant and the suppressors, we concluded that RodZ helps assembly of MreB filaments. MreB plays roles in regulation of cell polarity, length, and width, whereas RodZ is involved in regulation of length and width. In this review, I summarize our research and research from other groups on bacterial cell shape.

Cell wall precursors are required to organize the chlamydial division septum

Members of the Chlamydiales order are major bacterial pathogens that divide at mid-cell, without a sequence homologue of the FtsZ cytokinetic tubulin and without a classical peptidoglycan cell wall. Moreover, the spatiotemporal mechanisms directing constriction in Chlamydia are not known. Here we show that the MreB actin homologue and its conserved regulator RodZ localize to the division furrow in Waddlia chondrophila, a member of the Chlamydiales order implicated in human miscarriage. RodZ is recruited to the septal site earlier than MreB and in a manner that depends on biosynthesis of the peptidoglycan precursor lipid II by the MurA enzyme. By contrast, crosslinking of lipid II peptides by the Pbp3 transpeptidase disperses RodZ from the septum. Altogether, these findings provide a cytological framework for understanding chlamydial cytokinesis driven by septal cell wall synthesis.