High-resolution analysis of neuronal growth cone morphology by comparative atomic force and optical microscopy

Synergy of Nanotopography and Electrical Conductivity of PEDOT/PSS for Enhanced Neuronal Development

Biomaterials able to promote neuronal development and neurite outgrowth are highly desired in neural tissue engineering for the repair of damaged or disrupted neural tissue and restoring the axonal connection. For this purpose, the use of either electroactive or micro- and nanostructured materials has been separately investigated. Here, the use of a nanomodulated conductive poly(3,4-ethylendioxithiophene) poly(styrenesulfonate) (PEDOT/PSS) substrate that exhibits instructive topographical and electrical cues at the same time was investigated for the first time. In particular, thin films featuring grooves with sizes comparable with those of neuronal neurites (NanoPEDOT) were fabricated by electrochemical polymerization of PEDOT/PSS on a nanomodulated polycarbonate template. The ability of NanoPEDOT to support neuronal development and direct neurite outgrowth was demonstrated by assessing cell viability and proliferation, expression of neuronal markers, average neurite length, and direction of neuroblastoma N2A cells induced to differentiate on this novel support. In addition to the beneficial effect of the nanogrooved topography, a 30% increase was shown in the average length of neurites when differentiating cells were subjected to an electrical stimulation of a few microamperes for 6 h. The results reported here suggest a favorable effect on the neuronal development of the synergistic combination of nanotopography and electrical stimulation, supporting the use of NanoPEDOT in neural tissue engineering to promote physical and functional reconnection of impaired neural networks.

Topography and mechanical measurements of primary Schwann cells and neuronal cells with atomic force microscope for understanding and controlling nerve growth

Peripheral nerve injuries require a piece of substantial information for a satisfactory treatment. The prior peripheral nerve injury knowledge, can improve nerve repair, and its growth at molecular and cellular level. In this study, we employed an atomic force microscope (AFM) to investigate the topography and mechanical properties of the primary Schwann cells and neuronal cells. Tapping mode images and contact points force-volume maps provide the cells topography. Two different probes were used to acquire the micro and nanomechanical properties of the primary Schwann cells, NG-108-15 neuronal cells, and growth cones. Moreover, the sharp probe was only used to investigate neurites nanomechanics. A significant difference in the elastic moduli found between primary Schwann cells, and neuronal cells, with both probes, with consistent results. The elastic moduli of the growth cones were found higher, than the neuronal cells and primary Schwann cells, with both probes. Furthermore, the modulus variations were also found between neurites. These results have significant implications for a better understanding of the peripheral nerve system (PNS) in terms of defining the optimal pattern surface and nerve guidance conduits.

Manipulation of Axonal Outgrowth via Exogenous Low Forces

Neurons are mechanosensitive cells. The role of mechanical force in the process of neurite initiation, elongation and sprouting; nerve fasciculation; and neuron maturation continues to attract considerable interest among scientists. Force is an endogenous signal that stimulates all these processes in vivo. The axon is able to sense force, generate force and, ultimately, transduce the force in a signal for growth. This opens up fascinating scenarios. How are forces generated and sensed in vivo? Which molecular mechanisms are responsible for this mechanotransduction signal? Can we exploit exogenously applied forces to mimic and control this process? How can these extremely low forces be generated in vivo in a non-invasive manner? Can these methodologies for force generation be used in regenerative therapies? This review addresses these questions, providing a general overview of current knowledge on the applications of exogenous forces to manipulate axonal outgrowth, with a special focus on forces whose magnitude is similar to those generated in vivo. We also review the principal methodologies for applying these forces, providing new inspiration and insights into the potential of this approach for future regenerative therapies.

Mechanotransduction in neuronal cell development and functioning

Although many details remain still elusive, it became increasingly evident in recent years that mechanosensing of microenvironmental biophysical cues and subsequent mechanotransduction are strongly involved in the regulation of neuronal cell development and functioning. This review gives an overview about the current understanding of brain and neuronal cell mechanobiology and how it impacts on neurogenesis, neuronal migration, differentiation, and maturation. We will focus particularly on the events in the cell/microenvironment interface and the decisive extracellular matrix (ECM) parameters (i.e. rigidity and nanometric spatial organisation of adhesion sites) that modulate integrin adhesion complex-based mechanosensing and mechanotransductive signalling. It will also be outlined how biomaterial approaches mimicking essential ECM features help to understand these processes and how they can be used to control and guide neuronal cell behaviour by providing appropriate biophysical cues. In addition, principal biophysical methods will be highlighted that have been crucial for the study of neuronal mechanobiology.

Variations of Elastic Modulus and Cell Volume with Temperature for Cortical Neurons

Neurons change their growth dynamics and mechanical properties in response to external stimuli such as stiffness of the local microenvironment, ambient temperature, and biochemical or geometrical guidance cues. Here we use combined atomic force microscopy (AFM) and fluorescence microscopy experiments to investigate the relationship between external temperature, soma volume, and elastic modulus for cortical neurons. We measure how changes in ambient temperature affect the volume and the mechanical properties of neuronal cells at both the bulk (elastic modulus) and local (elasticity maps) levels. The experimental data demonstrate that both the volume and the elastic modulus of the neuron soma vary with changes in temperature. Our results show a decrease by a factor of 2 in the soma elastic modulus as the ambient temperature increases from room (25 °C) to physiological (37 °C) temperature, while the volume of the soma increases by a factor of 1.3 during the same temperature sweep. Using high-resolution AFM force mapping, we measure the temperature-induced variations within different regions of the elasticity maps (low and high values of elastic modulus) and correlate these variations with the dynamics of cytoskeleton components and molecular motors. We quantify the change in soma volume with temperature and propose a simple theoretical model that relates this change with variations in soma elastic modulus. These results have significant implications for understanding neuronal development and functions, as ambient temperature, cytoskeletal dynamics, and cellular volume may change with variations in physiological conditions, for example, during tissue compression and infections in vivo as well as during cell manipulation and tissue regeneration ex vivo.

Mechanics of Brain Tissues Studied by Atomic Force Microscopy: A Perspective

Tissue morphology and mechanics are crucial to the regulation of organ function. Investigating the exceptionally complex tissue of the brain at the sub-micron scale is challenging due to the complex structure and softness of this tissue, despite the large interest of biologists, medical engineers, biophysicists, and others in this topic. Atomic force microscopy (AFM) both as an imaging and as a mechanical tool provides an excellent opportunity to study soft biological samples such as live brain tissues. Here we review the principles of AFM, the performance of AFM in tissue imaging and mechanical mapping of cells and tissues, and finally opening the prospects and challenges of probing the biophysical properties of brain tissue using AFM.

Analysis of the Precision, Robustness, and Speed of Elastic Resonator Interference Stress Microscopy

Localization-microscopy-based methods are widely used to map the forces that cells apply to their substrates and to study important questions of cellular biomechanics. By contrast, elastic resonator interference stress microscopy (ERISM) uses an interference-based approach, which requires low light intensity and facilitates imaging of cellular forces with extreme precision (down to pN forces) and robustness (e.g., for continuous force monitoring over weeks). Here, the measurement trade-offs and numerical considerations required to optimize the performance of ERISM are described. The crucial parts of the fitting algorithm and the computational tools used to evaluate the data are explained in detail, and the precision and accuracy achievable with ERISM are analyzed. Additional features that can improve the robustness of ERISM further are discussed. The implementation of the analysis algorithm is verified with simulated test data and with experimental data. In addition, an approach to increase the acquisition speed of ERISM by a factor of four compared to the original implementation is described. In combination, these strategies allow us to measure the forces generated by a neural growth cone with high temporal resolution and continuously over several hours.

Recent advances in hybrid measurement methods based on atomic force microscopy and surface sensitive measurement techniques

This review summaries the recent progress of the combination of optical and non-optical surface sensitive techniques with the atomic force microscopy.

Local Arp2/3-dependent actin assembly modulates applied traction force during apCAM adhesion site maturation

In growth cones, local Arp 2/3-dependent actin assembly mechanically buffers apCAM adhesions from retrograde flow–associated traction forces. The resulting propulsive forces drive the exploratory motility of inductopodia. Increasing the stiffness of apCAM targets induces an extensive 3D actin cup to form at the adhesion during evoked growth responses.

Homophilic binding of immunoglobulin superfamily molecules such as the Aplysia cell adhesion molecule (apCAM) leads to actin filament assembly near nascent adhesion sites. Such actin assembly can generate significant localized forces that have not been characterized in the larger context of axon growth and guidance. We used apCAM-coated bead substrates applied to the surface of neuronal growth cones to characterize the development of forces evoked by varying stiffness of mechanical restraint. Unrestrained bead propulsion matched or exceeded rates of retrograde network flow and was dependent on Arp2/3 complex activity. Analysis of growth cone forces applied to beads at low stiffness of restraint revealed switching between two states: frictional coupling to retrograde flow and Arp2/3-dependent propulsion. Stiff mechanical restraint led to formation of an extensive actin cup matching the geometric profile of the bead target and forward growth cone translocation; pharmacological inhibition of the Arp2/3 complex or Rac attenuated F-actin assembly near bead binding sites, decreased the efficacy of growth responses, and blocked accumulation of signaling molecules associated with nascent adhesions. These studies introduce a new model for regulation of traction force in which local actin assembly forces buffer nascent adhesion sites from the mechanical effects of retrograde flow.

Quantifying mechanical force in axonal growth and guidance

Mechanical force plays a fundamental role in neuronal development, physiology, and regeneration. In particular, research has shown that force is involved in growth cone-mediated axonal growth and guidance as well as stretch-induced elongation when an organism increases in size after forming initial synaptic connections. However, much of the details about the exact role of force in these fundamental processes remain unknown. In this review, we highlight: (1) standing questions concerning the role of mechanical force in axonal growth and guidance; and (2) different experimental techniques used to quantify forces in axons and growth cones. We believe that satisfying answers to these questions will require quantitative information about the relationship between elongation, forces, cytoskeletal dynamics, axonal transport, signaling, substrate adhesion, and stiffness contributing to directional growth advance. Furthermore, we address why a wide range of force values have been reported in the literature, and what these values mean in the context of neuronal mechanics. We hope that this review will provide a guide for those interested in studying the role of force in development and regeneration of neuronal networks.

Neuron biomechanics probed by atomic force microscopy

Mechanical interactions play a key role in many processes associated with neuronal growth and development. Over the last few years there has been significant progress in our understanding of the role played by the substrate stiffness in neuronal growth, of the cell-substrate adhesion forces, of the generation of traction forces during axonal elongation, and of the relationships between the neuron soma elastic properties and its health. The particular capabilities of the Atomic Force Microscope (AFM), such as high spatial resolution, high degree of control over the magnitude and orientation of the applied forces, minimal sample damage, and the ability to image and interact with cells in physiologically relevant conditions make this technique particularly suitable for measuring mechanical properties of living neuronal cells. This article reviews recent advances on using the AFM for studying neuronal biomechanics, provides an overview about the state-of-the-art measurements, and suggests directions for future applications.

COMBINED ATOMIC FORCE AND FLUORESCENCE MICROSCOPIES TO MEASURE SUBCELLULAR MECHANICAL PROPERTIES OF LIVE CELLS

Atomic force microscopy (AFM) has been widely applied to study cellular functions;however, the relationship between cellular elasticity and ultrastructure density of a live cell remains to be discovered. The objective of this study was thus to extend our previous method of integrating AFM and immunofluorescence imaging to measure the ultrastructure distribution-related local mechanical properties of live cells. First, the morphology of a live cell was obtained by AFM. Second, the indentation sites were selected and flexible force volume indentation was performed. Third, the immunofluorescence image of the cell was obtained. The last was the mapping of the indentation site to the immunofluorescence image and obtaining the relationship between the local elastic properties and cytoskeleton density. The results on differentiated rat Schwann cells (RSCs) showed that the elastic modulus of stress fibers is higher than those of the nucleus and cytosol. The local elastic modulus of the live RSCs is correlated to the actin density, and the stress fiber that behaves like a pretension beam can give RSCs enough strength to envelop axons during myelination. In particular, the elastic properties of the live RSCs were twofold lower than those of the fixed. The results demonstrated the integrated method's applicability for a live cell.

Magnetic tweezers-based force clamp reveals mechanically distinct apCAM domain interactions

Cell adhesion molecules of the immunoglobulin superfamily (IgCAMs) play a crucial role in cell-cell interactions during nervous system development and function. The Aplysia CAM (apCAM), an invertebrate IgCAM, shares structural and functional similarities with vertebrate NCAM and therefore has been considered as the Aplysia homolog of NCAM. Despite these similarities, the binding properties of apCAM have not been investigated thus far. Using magnetic tweezers, we applied physiologically relevant, constant forces to apCAM-coated magnetic particles interacting with apCAM-coated model surfaces and characterized the kinetics of bond rupture. The average bond lifetime decreased with increasing external force, as predicted by theoretical considerations. Mathematical simulations suggest that the apCAM homophilic interaction is mediated by two distinct bonds, one involving all five immunoglobulin (Ig)-like domains in an antiparallel alignment and the other involving only two Ig domains. In summary, this study provides biophysical evidence that apCAM undergoes homophilic interactions, and that magnetic tweezers-based, force-clamp measurements provide a rapid and reliable method for characterizing relatively weak CAM interactions.

Mechanisms underlying the initiation and dynamics of neuronal filopodia: from neurite formation to synaptogenesis

Filopodia are finger-like cellular protrusions found throughout the metazoan kingdom and perform fundamental cellular functions during development and cell migration. Neurons exhibit a wide variety of extremely complex morphologies. In the nervous system, filopodia underlie many major morphogenetic events. Filopodia have roles spanning the initiation and guidance of neuronal processes, axons and dendrites to the formation of synaptic connections. This chapter addresses the mechanisms of the formation and dynamics of neuronal filopodia. Some of the major lessons learned from the study of neuronal filopodia are (1) there are multiple mechanisms that can regulate filopodia in a context-dependent manner, (2) that filopodia are specialized subcellular domains, (3) that filopodia exhibit dynamic membrane recycling which also controls aspects of filopodial dynamics, (4) that neuronal filopodia contain machinery for the orchestration of the actin and microtubule cytoskeleton, and (5) localized protein synthesis contributes to neuronal filopodial dynamics.

MORPHOLOGY AND ULTRASTRUCTURE-RELATED LOCAL MECHANICAL PROPERTIES OF PC-12 CELLS STUDIED BY INTEGRATING ATOMIC FORCE MICROSCOPY AND IMMUNOFLUORESCENCE IMAGING

A cost-effective method that integrates high-resolution morphology using an atomic force microscope and immunofluorescence imaging for measuring the local mechanical properties of a cell was developed. By considering the normal indentation conditions and the distribution of the underlying cytoskeleton, a criterion for selecting indentation sites was proposed. PC-12 cells cultivated under normal and high D-glucose medium are employed to demonstrate the applicability of the proposed method. The apparent Young's modulus for each indentation site was estimated by fitting the data with a pyramidal punch contact mechanics model. The results showed that the cell bodies cultivated in the high D-glucose medium were higher but their growth cones were shorter than those cultivated in a normal medium. The Young's moduli of the growth cones were positively correlated with the density of the actin filament in the cytoskeleton. The Young's moduli at the growth cone and the nucleus region of cells cultivated in the high D-glucose medium were higher and lower, respectively, than those of the control group. The results demonstrated the integrated method could correlate local mechanical properties and distribution of actin filament of the growth cone of PC-12 cell.

Atomic force microscopy and its contribution to understanding the development of the nervous system

While our understanding of the influence of biochemical signaling on cell functioning is increasing rapidly, the consequences of mechanical signaling are currently poorly understood. However, cells of the nervous system respond to their mechanical environment; their mechanosensitivity has important implications for development and disease. Atomic force microscopy provides a powerful technique to investigate the mechanical interaction of cells with their environment with high resolution. This method can be used to obtain high-resolution surface topographies, stiffness maps, and apply well-defined forces to samples at different length scales. This review summarizes recent advances of atomic force microscopy, provides an overview about state-of-the-art measurements, and suggests directions for future applications to investigate the involvement of mechanics in the development of the nervous system.

Multimicroscopic study of curcumin effect on fixed nonmalignant and cancerous mammalian epithelial cells

The morphology changes, in particular the organization of microtubules in mammalian nonmalignant HMEC 184A1 and cancerous MCF-7 cells during curcumin treatment have been investigated by utilizing multiphoton, fluorescence, and atomic force (AFM) microscopies. Fluorescence microscopy reveals formation of ring-like structures of microtubules circumscribing the nuclear area in HMEC 184A1 cells after treatment, while in MCF-7 cells, no important changes were observed. Topography analyses of fixed HMEC 184A1 and MCF-7 before and after treatment with curcumin were performed using AFM and the effect of the employed cells' fixation method was investigated on MCF-7 cells. Due to its indepth optical sectioning capacity multiphoton microscopy provided valuable complementary information on curcumin's effect on both cells' types. Combining information provided by AFM and optical fluorescence and biphoton microscopes allows us to gain a better understanding of the cells and their curcumin-induced changes, especially for microtubules which are the main target of antitumor chemotherapy treatments. Our multimicroscopic study demonstrates that 6 h incubation with curcumin does not induce significant modifications in the interphase microtubules in the malignant MCF7cell, whereas it has measurable effects on those of the nonmalignant HMEC 184A1 cells, revealing also morphology modifications over the nuclear area of these cells.

Depth-sensing nano-indentation on a myelinated axon at various stages

A nano-mechanical characterization of a multi-layered myelin sheath structure, which enfolds an axon and plays a critical role in the transmission of nerve impulses, is conducted. Schwann cells co-cultured in vitro with PC12 cells for various co-culture times are differentiated to form a myelinated axon, which is then observed using a transmission electron microscope. Three major myelination stages, with distinct structural characteristics and thicknesses around the axon, can be produced by varying the co-culture time. A dynamic contact module and continuous depth-sensing nano-indentation are used on the myelinated structure to obtain the load-on-sample versus measured displacement curve of a multi-layered myelin sheath, which is used to determine the work required for the nano-indentation tip to penetrate the myelin sheath. By analyzing the harmonic contact stiffness versus the measured displacement profile, the results can be used to estimate the three stages of the multi-layered structure on a myelinated axon. The method can also be used to evaluate the development stages of myelination or demyelination during nerve regeneration.

Combined atomic force microscopy and fluorescence microscopy

The atomic force microscope (AFM) is a high-resolution scanning-probe instrument which has become an important tool for cellular and molecular biophysics in recent years, but lacks the time resolution and functional specificities offered by fluorescence microscopic techniques. The advantages of both methods may be exploited by combining and synchronizing them. In this paper, the biological applications of AFM, fluorescence, and their combinations are briefly reviewed, and the assembly and utilization of a spatially and temporally synchronized AFM and total internal reflection fluorescence microscope are described. The application of the method is demonstrated on a fluorescently labeled cell culture.

Fragmentation as a mechanism for growth cone pruning and degeneration

During early development of the central nervous system, there is an excessive outgrowth of neuronal projections, which later need to be refined to achieve precise connectivity. Axon pruning and degeneration are strategies used to remove exuberant neurites and connections in the immature nervous system to ensure the proper formation of functional circuitry. To observe morphological changes and physical mechanisms underlying this process, early differentiating embryonic stem cell-derived neurons were used combining video imaging of live growth cones (GCs) with confocal laser scanning microscopy and atomic force microscopy, both on fixed and living neurons. Using this method, we could highlight the presence of submicrometric fragments in still and in some of the retracting GCs. The observed fragmentation is not an artifact of atomic force microscopy scanning or fixation, or the result of apoptosis. Therefore, the morphology of GCs depends on their overall motility, and fragmentation seems to be the fate of GCs that have not found a correct destination.

Molecular imaging of membrane proteins and microfilaments using atomic force microscopy

Atomic force microscopy (AFM) is an emerging technique for a variety of uses involving the analysis of cells. AFM is widely applied to obtain information about both cellular structural and subcellular events. In particular, a variety of investigations into membrane proteins and microfilaments were performed with AFM. Here, we introduce applications of AFM to molecular imaging of membrane proteins, and various approaches for observation and identification of intracellular microfilaments at the molecular level. These approaches can contribute to many applications of AFM in cell imaging.

Neuronal elasticity as measured by atomic force microscopy

A cell's form and function is determined to a great extent by its cellular membrane and the underlying cytoskeleton. Understanding changes in the cellular membrane and cytoskeleton can provide insight into aging and disease of the cell. The atomic force microscope (AFM) allows unparalled resolution for the imaging of these cellular components and the ability to probe their mechanical properties. This report describes our progress toward the use of AFM as a tool in neuroscience applications. Elasticity measurements are reported on living chick embryo dorsal root ganglion and sympathetic neurons in vitro. The neuronal cellular body and growth cones regions are examined for variations in cellular maturity. In addition, cellular changes due to exposure to various environmental conditions and neurotoxins are investigated. This report includes data obtained on different AFM systems, using various AFM techniques and thus also provides knowledge of AFM instruments and methodology.

Dynamics of leading lamellae of living fibroblasts visualized by high-speed scanning probe microscopy

In this study, we aimed at improving the temporal resolution of scanning probe microscopy (SPM) for observing living cells by introducing soft cantilevers, low feedback-gain operations, and cantilever deflection imaging. We achieved visualization of the mechanical architecture in leading lamellae of living fibroblasts at a temporal resolution of around 10 s, which is higher than that of conventional contact-mode SPM. Time-lapse SPM could be used to monitor not only cytoskeletal dynamics but also the dynamics of numerous microgranules. Statistical analysis of microgranular motion revealed that the microgranules have superdiffusive behaviors and significant directional order of motion. We also found that the direction of their motion is correlated with the direction of growing actin stress fibers. The combination of SPM with fluorescence microscopy showed that vinculin, a component of cell-substratum adhesion sites, localizes at the microgranules. Our experimental data provides a new insight into the intracellular mechanical architecture and its structural dynamics, suggesting that high-speed live-cell SPM has great potential for investigating the structural origin of cellular dynamics.

Identification of functional marker proteins in the mammalian growth cone

Identification of proteins in the mammalian growth cone has the potential to advance our understanding of this critical regulator of neuronal growth and formation of neural circuit; however, to date, only one growth cone marker protein, GAP-43, has been reported. Here, we successfully used a proteomic approach to identify 945 proteins present in developing rat forebrain growth cones, including highly abundant, membrane-associated and actin-associated proteins. Almost 100 of the proteins appear to be highly enriched in the growth cone, as determined by quantitative immunostaining, and for 17 proteins, the results of RNAi suggest a role in axon growth. Most of the proteins we identified have not previously been implicated in axon growth and thus their identification presents a significant step forward, providing marker proteins and candidate neuronal growth-associated proteins.

Topography and nanomechanics of live neuronal growth cones analyzed by atomic force microscopy

Neuronal growth cones are motile structures located at the end of axons that translate extracellular guidance information into directional movements. Despite the important role of growth cones in neuronal development and regeneration, relatively little is known about the topography and mechanical properties of distinct subcellular growth cone regions under live conditions. In this study, we used the AFM to study the P domain, T zone, and C domain of live Aplysia growth cones. The average height of these regions was calculated from contact mode AFM images to be 183 +/- 33, 690 +/- 274, and 1322 +/- 164 nm, respectively. These findings are consistent with data derived from dynamic mode images of live and contact mode images of fixed growth cones. Nano-indentation measurements indicate that the elastic moduli of the C domain and T zone ruffling region ranged between 3-7 and 7-23 kPa, respectively. The range of the measured elastic modulus of the P domain was 10-40 kPa. High resolution images of the P domain suggest its relatively high elastic modulus results from a dense meshwork of actin filaments in lamellipodia and from actin bundles in the filopodia. The increased mechanical stiffness of the P and T domains is likely important to support and transduce tension that develops during growth cone steering.

Multiplexed force measurements on live cells with holographic optical tweezers

We describe open-loop and closed-loop multiplexed force measurements using holographic optical tweezers. We quantify the performance of our novel video-based control system in a driven suspension of colloidal particles. We demonstrate our system's abilities with the measurement of the mechanical coupling between Aplysia bag cell growth cones and beads functionalized with the neuronal cell adhesion molecule, apCAM. We show that cells form linkages which couple beads to the underlying cytoskeleton. These linkages are intermittent, stochastic and heterogeneous across beads distributed near the leading edge of a single growth cone.

Reactive oxygen species regulate F-actin dynamics in neuronal growth cones and neurite outgrowth

Reactive oxygen species are well known for their damaging effects due to oxidation of lipids, proteins and DNA that ultimately result in cell death. Accumulating evidence indicates that reactive oxygen species also have important signaling functions in cell proliferation, differentiation, cell motility and apoptosis. Here, we tested the hypothesis whether reactive oxygen species play a physiological role in regulating F-actin structure and dynamics in neuronal growth cones. Lowering cytoplasmic levels of reactive oxygen species with a free radical scavenger, N-tert-butyl-alpha-phenylnitrone, or by inhibiting specific sources of reactive oxygen species, such as NADPH oxidases or lipoxygenases, reduced the F-actin content in the peripheral domain of growth cones. Fluorescent speckle microscopy revealed that these treatments caused actin assembly inhibition, reduced retrograde actin flow and increased contractility of actin structures in the transition zone referred to as arcs, possibly by activating the Rho pathway. Reduced levels of reactive oxygen species ultimately resulted in disassembly of the actin cytoskeleton. When neurons were cultured overnight in conditions of reduced free radicals, growth cone formation and neurite outgrowth were severely impaired. Therefore, we conclude that physiological levels of reactive oxygen species are critical for maintaining a dynamic F-actin cytoskeleton and controlling neurite outgrowth.

Vesicle trafficking dynamics and visualization of zones of exocytosis and endocytosis in tobacco pollen tubes

Pollen tubes are one of the fastest growing eukaryotic cells. Rapid anisotropic growth is supported by highly active exocytosis and endocytosis at the plasma membrane, but the subcellular localization of these sites is unknown. To understand molecular processes involved in pollen tube growth, it is crucial to identify the sites of vesicle localization and trafficking. This report presents novel strategies to identify exocytic and endocytic vesicles and to visualize vesicle trafficking dynamics, using pulse-chase labelling with styryl FM dyes and refraction-free high-resolution time-lapse differential interference contrast microscopy. These experiments reveal that the apex is the site of endocytosis and membrane retrieval, while exocytosis occurs in the zone adjacent to the apical dome. Larger vesicles are internalized along the distal pollen tube. Discretely sized vesicles that differentially incorporate FM dyes accumulate in the apical, subapical, and distal regions. Previous work established that pollen tube growth is strongly correlated with hydrodynamic flux and cell volume status. In this report, it is shown that hydrodynamic flux can selectively increase exocytosis or endocytosis. Hypotonic treatment and cell swelling stimulated exocytosis and attenuated endocytosis, while hypertonic treatment and cell shrinking stimulated endocytosis and inhibited exocytosis. Manipulation of pollen tube apical volume and membrane remodelling enabled fine-mapping of plasma membrane dynamics and defined the boundary of the growth zone, which results from the orchestrated action of endocytosis at the apex and along the distal tube and exocytosis in the subapical region. This report provides crucial spatial and temporal details of vesicle trafficking and anisotropic growth.

Kinetic-structural analysis of neuronal growth cone veil motility

Neuronal growth cone advance was investigated by correlative light and electron microscopy carried out on chick dorsal root ganglion cells. Advance was analyzed in terms of the two principal organelles responsible for protrusive motility in the growth cone – namely, veils and filopodia. Veils alternated between rapid phases of protrusion and retraction. Electron microscopy revealed characteristic structural differences between the phases. Our results provide a significant advance in three respects: first, protruding veils are comprised of a densely branched network of actin filaments that is lamellipodial in appearance and includes the Arp2/3 complex. On the basis of this structural and biomarker evidence, we infer that the dendritic nucleation and/or array-treadmilling mechanism of protrusive motility is conserved in veil protrusion of growth cones as in the motility of fibroblasts; second, retracting veils lack dendritic organization but contain a sparse network of long filaments; and third, growth cone filopodia have the capacity to nucleate dendritic networks along their length, a property consistent with veil formation seen at the light microscopic level but not previously understood in supramolecular terms. These elements of veil and filopodial organization, when taken together, provide a conceptual framework for understanding the structural basis of growth cone advance.