An electron microscopy journey in the study of microtubule structure and dynamics

Plasticity and Co-Factor-Dependent Structural Changes in the RecA Nucleoprotein Filament Studied by Small-Angle X-Ray Scattering (SAXS) Measurements and Molecular Modeling

Structural analyses of protein filaments formed by self-assembly, such as actin, tubulin, or recombinase filaments, have suffered for decades from technical issues due to difficulties in crystallization, their large size, or the dynamic behavior inherent to their cellular function. The advent of cryo-electron microscopy has finally enabled us to obtain structures at different stages of the existence of these filaments. However, these structures correspond to frozen states, and the possibility of observations in solution is still lacking, especially for filaments characterized by a high plasticity, such as the RecA protein for homologous recombination. Here, we use a combination of SAXS measurements and integrative modeling to generate the solution structure of two known forms of the RecA nucleoprotein filament, previously characterized by electron microscopy and resolved by X-ray crystallography. The two forms differ in the cofactor bound to RecA-RecA interfaces, either ATP or ADP. Cooperative transition from one form to the other has been observed during single-molecule experiments by pulling on the filament but also in solution by modifying solvent conditions. We first compare the SAXS data against known structural information. While the crystal structure of the ATP form matches well with the SAXS data, we deduce from the SAXS profiles of the ADP-form values of the pitch (72.0 Å) and the number of monomers per turn (6.4) that differ with respect to the crystal structure (respectively, 82.7 Å and 6.0). We then monitor the transition between the two states driven by the addition of magnesium, and we show this transition occurs with 0.3 mM Mg 2+ ions with a high cooperativity.

Hydrolysis-deficient mosaic microtubules as faithful mimics of the GTP cap

A critical feature of microtubules is their GTP cap, a stabilizing GTP-tubulin rich region at growing microtubule ends. Microtubules polymerized in the presence of GTP analogs or from GTP hydrolysis-deficient tubulin mutants have been used as GTP-cap mimics for structural and biochemical studies. However, these analogs and mutants generate microtubules with diverse biochemical properties and lattice structures, leaving it unclear what is the most faithful GTP mimic and hence the structure of the GTP cap. Here, we generate a hydrolysis-deficient human tubulin mutant, αE254Q, with the smallest possible modification. We show that αE254Q-microtubules are stable, but still exhibit mild mutation-induced growth abnormalities. However, mixing two GTP hydrolysis-deficient tubulin mutants, αE254Q and αE254N, at an optimized ratio eliminates growth and lattice abnormalities, indicating that these 'mosaic microtubules' are faithful GTP cap mimics. Their cryo-electron microscopy structure reveals that longitudinal lattice expansion, but not protofilament twist, is the primary structural feature distinguishing the GTP-tubulin containing cap from the GDP-tubulin containing microtubule shaft. However, alterations in protofilament twist may be transiently needed to allow lattice compaction and GTP hydrolysis. Together, our results provide insights into the structural origin of GTP cap stability, the pathway of GTP hydrolysis and hence microtubule dynamic instability.

Heligeom: A web resource to generate, analyze, and visualize filament architectures based on pairwise association geometries of biological macromolecules

At the subcellular level, macromolecules self-assemble to form molecular machinery in which the assembly modes play critical roles: the structural integrity of cell walls that allows mechanical growth, the maintenance and repair of the genetic material, membrane flow control, protein chaperoning, and ATP production, to cite just a few examples. As molecular modeling expands its scope to such systems, structural biologists are faced with the difficulty of understanding the structure and dynamics of these supramolecular assemblies. We present Heligeom, a webserver that offers a simple and efficient means for analyzing and constructing oligomeric assemblies based on user-provided structures of two interacting units. The input 3D coordinates may result from structure determination, simulations, docking trials, or deep-learning tools such as AlphaFold. For a given interface, Heligeom outputs the mathematical helical parameters of the corresponding oligomeric form, including axis, pitch, handedness, number of monomers per turn, etc. The server also allows leveraging these parameters to construct oligomers of specified size, visualizing them interactively, and downloading them as PDB files. For subunits (protomers) having multiple interaction geometries, the different interfaces and their global assembly geometry can be visualized and compared. Heligeom thus allows explicitly linking protomer-protomer interfaces to the oligomeric architecture, illuminating possible sources of plasticity in protein filaments such as mutations or thermal, mechanical, or chemical perturbations. Heligeom thus constitutes an intuitive tool to accompany integrative modeling of oligomeric filamentous assemblies. Examples of its application at different structural levels are presented. Heligeom webserver can be accessed at https://heligeom.galaxy.ibpc.fr.

Structural determination and modeling of ciliary microtubules

The axoneme, a microtubule-based array at the center of every cilium, has been the subject of structural investigations for decades, but only recent advances in cryo-EM and cryo-ET have allowed a molecular-level interpretation of the entire complex to be achieved. The unique properties of the nine doublet microtubules and central pair of singlet microtubules that form the axoneme, including the highly decorated tubulin lattice and the docking of massive axonemal complexes, provide opportunities and challenges for sample preparation, 3D reconstruction and atomic modeling. Here, the approaches used for cryo-EM and cryo-ET of axonemes are reviewed, while highlighting the unique opportunities provided by the latest generation of AI-guided tools that are transforming structural biology.

Protein Modelling and Molecular Docking Analysis of Fasciola hepatica β-Tubulin's Interaction Sites, with Triclabendazole, Triclabendazole Sulphoxide and Triclabendazole Sulphone

PURPOSE

Fasciola hepatica is a globally distributed trematode that causes significant economic losses. Triclabendazole is the primary pharmacological treatment for this parasite. However, the increasing resistance to triclabendazole limits its efficacy. Previous pharmacodynamics studies suggested that triclabendazole acts by interacting mainly with the β monomer of tubulin.

METHODS

We used a high-quality method to model the six isotypes of F. hepatica β-tubulin in the absence of three-dimensional structures. Molecular dockings were conducted to evaluate the destabilization regions in the molecule against the ligands triclabendazole, triclabendazole sulphoxide and triclabendazole sulphone.

RESULTS

The nucleotide binding site demonstrates higher affinity than the binding sites of colchicine, albendazole, the T7 loop and pβVII (p < 0.05). We suggest that the binding of the ligands to the polymerization site of β-tubulin can lead a microtubule disruption. Furthermore, we found that triclabendazole sulphone exhibited significantly higher binding affinity than other ligands (p < 0.05) across all isotypes of β-tubulin.

CONCLUSIONS

Our investigation has yielded new insight on the mechanism of action of triclabendazole and its sulphometabolites on F. hepatica β-tubulin through computational tools. These findings have significant implications for ongoing scientific research ongoing towards the discovery of novel therapeutics to treat F. hepatica infections.

Assessing the Stability of Biological Fibrils by Molecular-Scale Simulations

The nanomechanical characterization of several biological fibrils that are the result of protein aggregation via molecular dynamics simulation is nowadays feasible, and together with atomic force microscopy experiments has widened our understanding of the forces in the regime of pN-nN and system sizes of about hundreds of nanometers. Several methodologies have been developed to achieve this target, and they range from the atomistic representation via molecular force fields to coarse-grained strategies that provide comparable results with experiments in a systematic way. In this chapter, we discuss several methodologies for the calculation of mechanical parameters, such as the elastic constants of relevant biological systems. They are presented together with details about parameterization and current limitations. Then, we discuss some of the applications of such methodologies for the description of bacterial filament and β-amyloid systems. Finally, the latest lines of development are discussed.

Generic nature of the condensed states of proteins

Proteins undergoing liquid-liquid phase separation are being discovered at an increasing rate. Since at the high concentrations present in the cell most proteins would be expected to form a liquid condensed state, this state should be considered to be a fundamental state of proteins along with the native state and the amyloid state. Here we discuss the generic nature of the liquid-like and solid-like condensed states, and describe a wide variety of biological functions conferred by these condensed states.

Reconstruction of Average Subtracted Tubular Regions (RASTR) enables structure determination of tubular filaments by cryo-EM

•

Tubules (filaments, membrane tubules, etc) that stray from perfect symmetry or have decorations can be difficult to process.

•

New method Reconstruction of Average Subtracted Tubular Regions (RASTR), provides a way to isolate small areas of tubular architecture.

•

Upweighted and masked areas can be treated as single particles and the structure can be resolved using conventional refinement.

•

Successfully reconstructed protein filaments and membrane tubule decorations.

As the field of electron microscopy advances, the increasing complexity of samples being produced demand more involved processing methods. In this study, we have developed a new processing method for generating 3D reconstructions of tubular structures. Tubular biomolecules are common throughout many cellular processes and are appealing targets for biophysical research. Processing of tubules with helical symmetry is relatively straightforward for electron microscopy if the helical parameters are known, but tubular structures that deviate from helical symmetry (asymmetrical components, local but no global order, etc) present myriad issues. Here we present a new processing technique called Reconstruction of Average Subtracted Tubular Regions (RASTR), which was developed to reconstruct tubular structures without applying symmetry. We explain the RASTR approach and quantify its performance using three examples: a simulated symmetrical tubular filament, a symmetrical tubular filament from cryo-EM data, and a membrane tubule coated with locally ordered but not globally ordered proteins.

Computational Protocol for Assessing the Optimal Pixel Size to Improve the Accuracy of Single-particle Cryo-electron Microscopy Maps

Cryo-electron microscopy (cryo-EM) single-particle analysis has come a long way in achieving atomic-level resolution when imaging biomolecules. To obtain the best possible three-dimensional (3D) structure in cryo-EM, many parameters have to be carefully considered. Here we address the often-overlooked parameter of the pixel size, which describes the magnification of the image produced by the experiment. While efforts are made to refine and validate this parameter in the analysis of cryo-EM experimental data, there is no systematic protocol in place. Since the pixel size parameter can have an impact on the resolution and accuracy of a cryo-EM map, and the atomic resolution 3D structure models derived from it, we propose a computational protocol to estimate the appropriate pixel size parameter. In our protocol, we fit and refine atomic structures against cryo-EM maps at multiple pixel sizes. The resulting fitted and refined structures are evaluated using the GOAP (generalized orientation-dependent, all-atom statistical potential) score, which we found to perform better than other commonly used functions, such as Molprobity and the correlation coefficient from refinement. Finally, we describe the efficacy of this protocol in retrieving appropriate pixel sizes for several examples; simulated data based on yeast elongation factor 2 and experimental data from Gro-EL chaperone, beta-galactosidase, and the TRPV1 ion channel.

Hierarchical Self-Assembly of Poly-Pseudorotaxanes into Artificial Microtubules

Hierarchical self-assembly of building blocks over multiple length scales is ubiquitous in living organisms. Microtubules are one of the principal cellular components formed by hierarchical self-assembly of nanometer-sized tubulin heterodimers into protofilaments, which then associate to form micron-length-scale, multi-stranded tubes. This peculiar biological process is now mimicked with a fully synthetic molecule, which forms a 1:1 host-guest complex with cucurbit[7]uril as a globular building block, and then polymerizes into linear poly-pseudorotaxanes that associate laterally with each other in a self-shape-complementary manner to form a tubular structure with a length over tens of micrometers. Molecular dynamic simulations suggest that the tubular assembly consists of eight poly-pseudorotaxanes that wind together to form a 4.5 nm wide multi-stranded tubule.

Second harmonic generation polarization microscopy as a tool for protein structure analysis

Cryo-electron microscopy and X-ray crystallography have been the major tools of protein structure analysis for decades and will certainly continue to be essential in the future. Moreover, nuclear magnetic resonance or Förster resonance energy transfer can measure structural dynamics. Here, we propose to add optical second-harmonic generation (SHG), which is a nonlinear optical scattering process sensitive to molecular structures in illuminated materials, to the tool-kit of structural analysis methodologies. SHG can be expected to probe the structural changes of proteins in the physiological condition, and thus link protein structure and biological function. We demonstrate that a conformational change as well as its dynamics in protein macromolecular assemblies can be detected by means of SHG polarization measurement. To prove the capability of SHG polarization measurement with regard to protein structure analysis, we developed an SHG polarization microscope to analyze microtubules in solution. The difference in conformation between microtubules with different binding molecules was successfully observed as polarization dependence of SHG intensity. We also succeeded in capturing the temporal variation of structure in a photo-switchable protein crystal in both activation and inactivation processes. These results illustrate the potential of this method for protein structure analysis in physiological solutions at room temperature without any labeling.

Bacterially Derived Antibody Binders as Small Adapters for DNA-PAINT Microscopy

Current optical super-resolution implementations are capable of resolving features spaced just a few nanometers apart. However, translating this spatial resolution to cellular targets is limited by the large size of traditionally employed primary and secondary antibody reagents. Recent advancements in small and efficient protein binders for super-resolution microscopy, such as nanobodies or aptamers, provide an exciting avenue for the future; however, their widespread availability is still limited. To address this issue, here we report the combination of bacterial-derived binders commonly used in antibody purification with DNA-based point accumulation for imaging in nanoscale topography (DNA-PAINT) microscopy. The small sizes of these protein binders, relative to secondary antibodies, make them an attractive labeling alternative for emerging superresolution techniques. We present here a labeling protocol for DNA conjugation of bacterially derived proteins A and G for DNA-PAINT, having assayed their intracellular performance by targeting primary antibodies against tubulin, TOM20, and the epidermal growth factor receptor (EGFR) and quantified the increases in obtainable resolution.

Autoregulation and repair in microtubule homeostasis

Even in the face of damaging insults, most cells maintain stability over time through multiple homeostatic pathways, including maintenance of the microtubule cytoskeleton that is fundamental to numerous cellular processes. The dynamic instability-perpetual growth and shrinkage-is the best-known microtubule regulatory pathway, which allows rapid rebuilding of the microtubule cytoskeleton in response to internal or external cues. Much less investigated is homeostatic regulation through availability of α-β tubulin heterodimers-microtubules' main building blocks-which influences total mass and dynamic behavior of microtubules. Finally, the most recently discovered is microtubule homeostasis through self-repair, where new GTP-bound tubulin heterodimers replace the lost ones in the microtubule lattice. In this review we try to integrate our current knowledge on how dynamic instability, regulation of tubulin mass, and self-repair work together to achieve microtubule homeostasis.

Update: Plant Cortical Microtubule Arrays

Cortical microtubules play a critical role in plant morphogenesis by creating array patterns that template the deposition of cellulose microfibrils.

Helical growth in plant organs: mechanisms and significance

Many plants show some form of helical growth, such as the circular searching movements of growing stems and other organs (circumnutation), tendril coiling, leaf and bud reversal (resupination), petal arrangement (contortion) and leaf blade twisting. Recent genetic findings have revealed that such helical growth may be associated with helical arrays of cortical microtubules and of overlying cellulose microfibrils. An alternative mechanism of coiling that is based on differential contraction within a bilayer has also recently been identified and underlies at least some of these growth patterns. Here, I provide an overview of the genes and cellular processes that underlie helical patterning. I also discuss the diversity of helical growth patterns in plants, highlighting their potential adaptive significance and comparing them with helical growth patterns in animals.

Microtubule nucleation: beyond the template

Microtubules are cytoskeletal filaments central to a wide range of essential cellular functions in eukaryotic cells. Consequently, cells need to exert tight control over when, where and how many microtubules are being made. Whereas the regulation of microtubule dynamics is well studied, the molecular mechanisms of microtubule nucleation are still poorly understood. Next to the established master template of nucleation, the γ-tubulin ring complex, other microtubule-associated proteins that affect microtubule dynamic properties have recently been found to contribute to nucleation. It has begun to emerge that the nucleation efficiency is controlled not only by template activity but also by, either additionally or alternatively, the stabilization of the nascent microtubule 'nucleus'. This suggests a simple conceptual framework for the mechanisms regulating microtubule nucleation in cells.

Vitrification after multiple rounds of sample application and blotting improves particle density on cryo-electron microscopy grids

Single particle cryo-electron microscopy (cryoEM) is becoming widely adopted as a tool for structural characterization of biomolecules at near-atomic resolution. Vitrification of the sample to obtain a dense distribution of particles within a single field of view remains a major bottleneck for the success of such experiments. Here, we describe a simple and cost-effective method to increase the density of frozen-hydrated particles on grids with holey carbon support films. It relies on performing multiple rounds of sample application and blotting prior to plunge freezing in liquid ethane. We show that this approach is generally applicable and significantly increases particle density for a range of samples, such as small protein complexes, viruses and filamentous assemblies. The method is versatile, easy to implement, minimizes sample requirements and can enable characterization of samples that would otherwise resist structural studies using single particle cryoEM.

The Intersection of Structural and Chemical Biology - An Essential Synergy

The continual improvement in our ability to generate high resolution structural models of biological molecules has stimulated and supported innovative chemical biology projects that target increasingly challenging ligand interaction sites. In this review we outline some of the recent developments in chemical biology and rational ligand design and show selected examples that illustrate the synergy between these research areas.