Thermodynamics of melittin tetramerization determined by circular dichroism and implications for protein folding

Melittin-The principal toxin of honeybee venom-Is also produced in the honeybee fat body

Melittin is a powerful toxin present in honeybee venom that is active in a wide range of animals, from insects to humans. Melittin exerts numerous biological, toxicological, and pharmacological effects, the most important of which is destruction of the cell membrane. The phospholipase activity of melittin and its ability to activate phospholipases in the venom contribute to these actions. Using analytical methods, we discovered that the honeybee Apis mellifera produces melittin not only in the venom gland but also in its fat body cells, which remain resistant to this toxin's effects. We suggest that melittin acts as an anti-bacterial agent, since its gene expression is significantly upregulated when honeybees are infected with Escherichia coli and Listeria monocytogenes bacteria; additionally, melittin effectively kills these bacteria in the disc diffusion test. We hypothesize that the chemical and physicochemical properties of the melittin molecule (hydrophilicity, lipophilicity, and capacity to form tetramers) in combination with reactive conditions (melittin concentration, salt concentration, pH, and temperature) are responsible for the targeted destruction of bacterial cells and apparent tolerance towards own tissue cells. Considering that melittin is an important current and, importantly, potential broad-spectrum medication, a thorough understanding of the observed phenomena may significantly increase its use in clinical practice.

Structural and thermodynamic insights into antibody light chain tetramer formation through 3D domain swapping

Overexpression of antibody light chains in small plasma cell clones can lead to misfolding and aggregation. On the other hand, the formation of amyloid fibrils from antibody light chains is related to amyloidosis. Although aggregation of antibody light chain is an important issue, atomic-level structural examinations of antibody light chain aggregates are sparse. In this study, we present an antibody light chain that maintains an equilibrium between its monomeric and tetrameric states. According to data from X-ray crystallography, thermodynamic and kinetic measurements, as well as theoretical studies, this antibody light chain engages in 3D domain swapping within its variable region. Here, a pair of domain-swapped dimers creates a tetramer through hydrophobic interactions, facilitating the revelation of the domain-swapped structure. The negative cotton effect linked to the β-sheet structure, observed around 215 nm in the circular dichroism (CD) spectrum of the tetrameric variable region, is more pronounced than that of the monomer. This suggests that the monomer contains less β-sheet structures and exhibits greater flexibility than the tetramer in solution. These findings not only clarify the domain-swapped structure of the antibody light chain but also contribute to controlling antibody quality and advancing the development of future molecular recognition agents and drugs.

Millisecond Time-Resolved Solid-State NMR Initiated by Rapid Inverse Temperature Jumps

Elucidation of the detailed mechanisms by which biological macromolecules undergo major structural conversions, such as folding, complex formation, and self-assembly, is a central concern of biophysical chemistry that will benefit from new experimental methods. We describe a simple technique for initiating a structural conversion process by a rapid decrease in the temperature of a solution, i.e., a rapid inverse temperature jump. By pumping solutions through copper capillary tubes that are thermally anchored to heated and cooled blocks, solution temperatures can be switched from 95 to 30 °C (or lower) in about 0.8 ms. For time-resolved solid-state nuclear magnetic resonance (ssNMR), solutions can then be frozen rapidly by spraying into cold isopentane after a variable structural evolution time τ_e. As an initial demonstration, we use this "inverse T-jump" technique to characterize the kinetics and mechanism by which the 26-residue peptide melittin converts from its primarily disordered, monomeric state at 95 °C to its α-helical, tetrameric state at 30 °C. One- and two-dimensional ssNMR spectra of frozen solutions with various values of τ_e, recorded at 25 K with signal enhancements from dynamic nuclear polarization, show that both helical secondary structure and intermolecular contacts develop on the same time scale of about 6 ms. The dependences on τ_e of both intraresidue crosspeak patterns and inter-residue crosspeak volumes in two-dimensional spectra can be fit with a unidirectional dimerization model, consistent with dimerization being the rate-limiting step for melittin tetramer formation.

Peptide lipidation in lysophospholipid micelles and lysophospholipid-enriched membranes

Acyl transfer from lipids to membrane-associated peptides is a well-documented process, leading to the generation of a lipidated peptide and a lysolipid. In this article, we demonstrate that acyl transfer from lysophosphatidylcholines (lysoPCs) to the peptide melittin also occurs, both in micelles of pure lysolipid and in lipid/lysolipid mixtures. In the case of bilayers containing lysolipids, acyl transfer from the lysolipid is marginally favoured over transfer from the lipid. In pure bilayers of saturated lipids, the introduction of even small amounts of lysolipid appears to significantly increase the reactivity towards lipidation.

Influenza A Virus NS1 Protein Binds as a Dimer to RNA-Free PABP1 but Not to the PABP1·Poly(A) RNA Complex

Influenza A virus (IAV) is a highly contagious human pathogen that is responsible for tens of thousands of deaths each year. Non-structural protein 1 (NS1) is a crucial protein expressed by IAV to evade the host immune system. Additionally, NS1 has been proposed to stimulate translation because of its ability to bind poly(A) binding protein 1 (PABP1) and eukaryotic initiation factor 4G. We analyzed the interaction of NS1 with PABP1 using quantitative techniques. Our studies show that NS1 binds as a homodimer to PABP1, and this interaction is conserved across different IAV strains. Unexpectedly, NS1 does not bind to PABP1 that is bound to poly(A) RNA. Instead, NS1 binds only to PABP1 free of RNA, suggesting that stimulation of translation does not occur by NS1 interacting with the PABP1 molecule attached to the mRNA 3'-poly(A) tail. These results suggest that the function of the NS1·PABP1 complex appears to be distinct from the classical role of PABP1 in translation initiation, when it is bound to the 3'-poly(A) tail of mRNA.

Selective Modification of Tryptophan Residues in Peptides and Proteins Using a Biomimetic Electron Transfer Process

We report here a photochemical process for the selective modification of tryptophan (Trp) residues in peptides and small proteins using electron-responsive N-carbamoylpyridinium salts and UV-B light. Preliminary mechanistic experiments suggest that the photoconjugation process proceeds through photoinduced electron transfer (PET) between Trp and the pyridinium salt, followed by fragmentation of the pyridinium N-N bond and concomitant transfer of this group to Trp. The reaction displays excellent site selectivity for Trp and is tolerant to other, redox-active amino-acid residues. Moreover, the reaction proceeds in pure aqueous conditions without the requirement of organic cosolvents or photocatalysts, is enhanced by glutathione, and operates efficiently over a wide range of peptide concentrations (10-700 μM). The scope of the process was explored through the labeling of 6-Trp-containing peptides and proteins ranging from 1 to 14 kDa. We demonstrate the versatility of the N-carbamoylpyridinium salt both by tuning the electrochemical and photochemical properties of the pyridinium scaffold to enable challenging photoconjugation reactions and by using the carbamoyl moiety to tether a plethora of productive functional groups, including reactive handles, purification tags, and removable protecting groups.

Application of millisecond time-resolved solid state NMR to the kinetics and mechanism of melittin self-assembly

Common experimental approaches for characterizing structural conversion processes such as protein folding and self-assembly do not report on all aspects of the evolution from an initial state to the final state. Here, we demonstrate an approach that is based on rapid mixing, freeze-trapping, and low-temperature solid-state NMR (ssNMR) with signal enhancements from dynamic nuclear polarization (DNP). Experiments on the folding and tetramerization of the 26-residue peptide melittin following a rapid pH jump show that multiple aspects of molecular structure can be followed with millisecond time resolution, including secondary structure at specific isotopically labeled sites, intramolecular and intermolecular contacts between specific pairs of labeled residues, and overall structural order. DNP-enhanced ssNMR data reveal that conversion of conformationally disordered melittin monomers at low pH to α-helical conformations at neutral pH occurs on nearly the same timescale as formation of antiparallel melittin dimers, about 6 to 9 ms for 0.3 mM melittin at 24 °C in aqueous solution containing 20% (vol/vol) glycerol and 75 mM sodium phosphate. Although stopped-flow fluorescence data suggest that melittin tetramers form quickly after dimerization, ssNMR spectra show that full structural order within melittin tetramers develops more slowly, in ∼60 ms. Time-resolved ssNMR is likely to find many applications to biomolecular structural conversion processes, including early stages of amyloid formation, viral capsid formation, and protein-protein recognition.

Helical Structure of Recombinant Melittin

Melittin is an extensively studied, 26-residue toxic peptide from honey bee venom. Because of its versatility in adopting a variety of secondary (helix or coil) and quaternary (monomer or tetramer) structures in various environments, melittin has been the focus of numerous investigations as a model peptide in protein folding studies as well as in studies involving binding to proteins, lipids, and polysaccharides. A significant body of evidence supports the view that melittin binds to these macromolecules in a predominantly helical conformation, but detailed structural knowledge of this conformation is lacking. In this report, we present nuclear magnetic resonance (NMR)-based structural insights into the helix formation of recombinant melittin in the presence of trifluoroethanol (TFE): a known secondary structure inducer in peptides. These studies were performed at neutral pH, with micromolar amounts of the peptide. Using nuclear Overhauser effect (NOE)-derived distance restraints from three-dimensional NMR spectra, we determined the atomic resolution solution NMR structure of recombinant melittin bearing a TFE-stabilized helix. To circumvent the complications with structure determination of small peptides with high conformational flexibility, we developed a workflow for enhancing proton NOEs by increasing the viscosity of the medium. In the TFE-containing medium, recombinant monomeric melittin forms a long, continuous helical structure, which consists of the N- and C-terminal α-helices and the noncanonical 3₁₀-helix in the middle. The noncanonical 3₁₀-helix is missing in the previously solved X-ray structure of tetrameric melittin and the NMR structure of melittin in methanol. Melittin's structure in TFE-containing medium provides insights into melittin's conformational transitions, which are relevant to the peptide's interactions with its biological targets.

The influence of cholesterol on melittin lipidation in neutral membranes

Cholesterol inclusion in membranes influences the rate and selectivity of acyl transfer from lipids to a membrane-embedded peptide.

Inhibitory effect of melittin on endonuclease-like activity of centrin

The xeroderma pigmentosum group C protein (XPC) and centrin2 are the primary initiators of global genome nucleotide excision repair (NER). Centrin, acts as a member of the EF-hand super family of calcium-binding proteins, playing roles in reconstitution of the vitro NER reaction. To understand the possible molecular and structural properties of the multiprotein process, the interactions of Euplotes octocarinatus centrin (EoCen), melittin, and DNA are described. EoCen shares a sequence identity of 66% with centrin2. Melittin possesses inverse direction hydrophobic triads-leucine-leucine-tryptophan (LLW) which are responsible for centrin binding. It is applied as a natural peptide to mimic centrin target peptide. As a result, it is proved that the integrated protein shows an endonuclease-like activity to DNA. Melittin is capable of interaction with both EoCen and DNA. More importantly, it is found that melittin displays an inhibitory effect on the endonuclease-like activity of centrin when it co-exists with EoCen and DNA in solution. Meanwhile, the DNA-melittin-EoCen ternary complex forms in the process. Quantitative analyses demonstrated by extensive biophysical assays reveal that binding of the peptide to DNA or centrin modulates the binding properties of it to another component. Furthermore, a possible positioning model of DNA and EoCen on melittin is proposed. This finding may constitute a model for that existing between centrin and its target peptide in NER process.

Nuclear Magnetic Resonance-Based Structural Characterization and Backbone Dynamics of Recombinant Bee Venom Melittin

In recent years, there has been a resurgence of interest in melittin and its variants as their therapeutic potential has become increasingly evident. Melittin is a 26-residue peptide and a toxic component of honey bee venom. The versatility of melittin in interacting with various biological substrates, such as membranes, glycosaminoglycans, and a variety of proteins, has inspired a slew of studies that aim to improve our understanding of the structural basis of such interactions. However, these studies have largely focused on melittin solutions at high concentrations (>1 mM), even though melittin is generally effective at lower (micromolar) concentrations. Here we present high-resolution nuclear magnetic resonance studies in the lower-concentration regime using a novel method to produce isotope-labeled (¹⁵N and ¹³C) recombinant melittin. We provide residue-specific structural characterization of melittin in dilute aqueous solution and in 2,2,2-trifluoroethanol/water mixtures, which mimic melittin structure-function and interactions in aqueous and membrane-like environments, respectively. We find that the cis-trans isomerization of Pro14 is key to changes in the secondary structure of melittin. Thus, this study provides residue-specific structural information about melittin in the free state and in a model of the substrate-bound state. These results, taken together with published work from other laboratories, reveal the peptide's structural versatility that resembles that of intrinsically disordered proteins and peptides.

Hemin and bile pigments are the secondary structure regulators of intrinsically disordered antimicrobial peptides

The interaction of protoporphyrin compounds of human origin with the major bee venom component melittin (26 a.a., Z +6) and its hybrid derivative (CM15, 15 a.a., Z +6) were studied by a combination of various spectroscopic methods. Throughout a two-state, concentration-dependent process, hemin and its metabolites (biliverdin, bilirubin, bilirubin ditaurate) increase the parallel β-sheet content of the natively unfolded melittin, suggesting the oligomerization of the peptide chains. In contrast, α-helix promoting effect was observed with the also disordered but more cationic CM15. According to fluorescence quenching experiments, the sole Trp residue of melittin is the key player during the binding, in the vicinity of which the first pigment molecule is accommodated presumably making indole-porphyrin π-π stacking interaction. As circular dichroism titration data suggest, cooperative association of additional ligands subsequently occurs, resulting in multimeric complexes with an apparent dissociation constant ranged from 20 to 65 μM. Spectroscopic measurements conducted with the bilirubin catabolite urobilin and stercobilin refer to the requirement of intact dipyrrinone moieties for inducing secondary structure transformations. The binding topography of porphyrin rings on a model parallel β-sheet motif was evaluated by absorption spectroscopy and computational modeling showing a slipped-cofacial binding mode responsible for the red shift and hypochromism of the Soret band. Our results may aid to recognize porphyrin-responsive binding motifs of biologically relevant, intrinsically disordered peptides and proteins, where transient conformations play a vital role in their functions.

A New Mixed All-Atom/Coarse-Grained Model: Application to Melittin Aggregation in Aqueous Solution

We introduce a new mixed resolution, all-atom/coarse-grained approach (AACG), for modeling peptides in aqueous solution and apply it to characterizing the aggregation of melittin. All of the atoms in peptidic components are represented, while a single site is used for each water molecule. With the full flexibility of the peptide retained, our AACG method achieves speedups by a factor of 3-4 for CPU time reduction and another factor of roughly 7 for diffusion. An Ewald treatment permits the inclusion of long-range electrostatic interactions. These characteristics fit well with the requirements for studying peptide association and aggregation, where the system sizes and time scales require considerable computational resources with all-atom models. In particular, AACG is well suited for biologics since changes in peptide shape and long-range electrostatics may play an important role. The application of AACG to melittin, a 26-residue peptide with a well-known propensity to aggregate in solution, serves as an initial demonstration of this technology for studying peptide aggregation. We observed the formation of melittin aggregates during our simulations and characterized the time-evolution of aggregate size distribution, buried surface areas, and residue contacts. Key interactions including π-cation and π-stacking involving TRP19 were also examined. Our AACG simulations demonstrated a clear salt effect and a moderate temperature effect on aggregation and support the molten globule model of melittin aggregates. As a showcase, this work illustrates the useful role for AACG in investigations of peptide aggregation and its potential to guide formulation and design of biologics.

NMR chemical shift analysis of the conformational transition between the monomer and tetramer of melittin in an aqueous solution

It is known that melittin in an aqueous solution undergoes a conformational transition between the monomer and tetramer by variation in temperature. The transition correlates closely with isomers of the proline residue; monomeric melittin including a trans proline peptide bond (trans-monomer) is involved directly in the transition, whereas monomeric melittin having a cis proline peptide bond (cis-monomer) is virtually not. The transition has been explored by using nuclear magnetic resonance spectroscopy in order to clarify the stability of the tetrameric conformation and the cooperativity of the transition. In the light of temperature dependence of chemical shifts of resonances from the isomeric monomers, we qualitatively estimate the temperature-, salt-, and concentration-dependence of the relative equilibrium populations of the trans-monomer and tetramer, and show that the tetramer has a maximum conformational stability at 30-45 °C and that the transition cooperativity is very low.

Effect of helix length on the stability of the Lac repressor antiparallel coiled coil

The helix length dependence of the stability of antiparallel four-chain coiled coils is investigated using eight synthetic peptides (Lac21-Lac28) whose sequences are derived from the tetramerization domain of the Lac repressor protein. Previous studies using analytical ultracentrifugation sedimentation equilibrium experiments to characterize Lac21 and Lac28 justifies the use of a two state model to describe the unfolding behavior of these two peptides. Using circular dichroism spectropolarimetry as a measure of tetramer assembly, both chemical and thermal denaturation experiments were carried out to determine thermodynamic parameters. We found that the hydrophobic core residues provide the greatest impact on stability and, as a consequence, must reorganize the register of the antiparallel helices to accommodate the burial of the nonpolar amino acids. Addition of noncore residues appears to have only a minor effect on stability, and in some cases, show a slight destabilization.

Sensing pH via p-cyanophenylalanine fluorescence: Application to determine peptide pKa and membrane penetration kinetics

We expand the spectroscopic utility of a well-known infrared and fluorescence probe, p-cyanophenylalanine, by showing that it can also serve as a pH sensor. This new application is based on the notion that the fluorescence quantum yield of this unnatural amino acid, when placed at or near the N-terminal end of a polypeptide, depends on the protonation status of the N-terminal amino group of the peptide. Using this pH sensor, we are able to determine the N-terminal pKa values of nine tripeptides and also the membrane penetration kinetics of a cell-penetrating peptide. Taken together, these examples demonstrate the applicability of using this unnatural amino acid fluorophore to study pH-dependent biological processes or events that accompany a pH change.

Cytotoxic helix-rich oligomer formation by melittin and pancreatic polypeptide

Conversion of amyloid fibrils by many peptides/proteins involves cytotoxic helix-rich oligomers. However, their toxicity and biophysical studies remain largely unknown due to their highly dynamic nature. To address this, we chose two helical peptides (melittin, Mel and pancreatic polypeptide, PP) and studied their aggregation and toxicity. Mel converted its random coil structure to oligomeric helical structure upon binding to heparin; however, PP remained as helix after oligomerization. Interestingly, similar to Parkinson’s associated α-synuclein (AS) oligomers, Mel and PP also showed tinctorial properties, higher hydrophobic surface exposure, cellular toxicity and membrane pore formation after oligomerization in the presence of heparin. We suggest that helix-rich oligomers with exposed hydrophobic surface are highly cytotoxic to cells irrespective of their disease association. Moreover as Mel and PP (in the presence of heparin) instantly self-assemble into stable helix-rich amyloidogenic oligomers; they could be represented as models for understanding the biophysical and cytotoxic properties of helix-rich intermediates in detail.

Thermal expansivities of peptides, polypeptides and proteins as measured by pressure perturbation calorimetry

The main goal of this work was to provide direct experimental evidence that the expansivity of peptides, polypeptides and proteins as measured by pressure perturbation calorimetry (PPC), can serve as a proxy to characterize relative compactness of proteins, especially the denatured state ensemble. This is very important as currently only small angle X-ray scattering (SAXS), intrinsic viscosity and, to a lesser degree, fluorescence resonance transfer (FRET) experiments are capable of reporting on the compactness of denatured state ensembles. We combined the expansivity measurements with other biophysical methods (far-UV circular dichroism spectroscopy, differential scanning calorimetry, and small angle X-ray scattering). Three case studies of the effects of conformational changes on the expansivity of polypeptides in solution are presented. We have shown that expansivity appears to be insensitive to the helix-coil transition, and appears to reflect the changes in hydration of the side-chains. We also observed that the expansivity is sensitive to the global conformation of the polypeptide chain and thus can be potentially used to probe hydration of different collapsed states of denatured or even intrinsically disordered proteins.

Evaluation of the calmodulin-SOX9 interaction by "magnetic fishing" coupled to mass spectrometry

Disruption of calmodulin (CaM)-based protein interactions has been touted as a potential means for modulating several disease pathways. Among these is SOX9, which is a DNA binding protein that is involved in chrondrocyte differentiation and regulation of the hormones that control sexual development. In this work, we employed a "magnetic fishing"/mass spectrometry assay in conjunction with intrinsic fluorescence to examine the interaction of CaM with the CaM-binding domain of SOX9 (SOX-CAL), and to assess the modulation of this interaction by known anti-CaM compounds. Our data show that there is a high affinity interaction between CaM and SOX-CAL (27±9 nM), and that SOX-CAL bound to the same location as the well-known CaM antagonist melittin; unexpectedly, we also found that addition of CaM-binding small molecules initially produced increased SOX-CAL binding, indicative of binding to both the well-known high-affinity CaM binding site and a second, lower-affinity binding site.

Unfolding studies of the cysteine protease baupain, a papain-like enzyme from leaves of Bauhinia forficata: effect of pH, guanidine hydrochloride and temperature

Baupain belongs to the α+β class of proteins with a secondary structure-content of 44% α-helix, 16% β-sheet and 12% β-turn. The structural transition induced by pH was found to be noncooperative, with no important differences observed in the pH range from 3.0 to 10.5. At pH 2.0 the protein presented substantial non-native structure with strong ANS binding. Guanidine hydrochloride (GdnHCl)-induced unfolding did not change the protein structure significantly until 4.0 M, indicating the high rigidity of the molecule. The unfolding was cooperative, as seen by the sigmoidal transition curves with midpoints at 4.7 ± 0.2 M and 5.0 ± 0.2 M GdnHCl, as measured by CD and fluorescence spectroscopy. A red shift of 7 nm in intrinsic fluorescence was observed with 6.0 M GdnHCl. Temperature-induced unfolding of baupain was incomplete, and at least 35% of the native structure of the protein was retained, even at high temperature (90 °C). Baupain showed characteristics of a molten globule state, due to preferential ANS binding at pH 2.0 in comparison to the native form (pH 7.0) and completely unfolded (6.0 M GdnHCl) state. Combined with information about N-terminal sequence similarity, these results allow us to include baupain in the papain superfamily.

riDOM, a cell penetrating peptide. Interaction with phospholipid bilayers

Melittin is an amphipathic peptide which has received much attention as a model peptide for peptide-membrane interactions. It is however not suited as a transfection agent due to its cytolytic and toxicological effects. Retro-inverso-melittin, when covalently linked to the lipid 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (riDOM), eliminates these shortcomings. The interaction of riDOM with phospholipid membranes was investigated with circular dichroism (CD) spectroscopy, dynamic light scattering, ζ-potential measurements, and high-sensitivity isothermal titration calorimetry. riDOM forms cationic nanoparticles with a diameter of ~13nm which are well soluble in water and bind with high affinity to DNA and lipid membranes. When dissolved in bilayer membranes, riDOM nanoparticles dissociate and form transient pores. riDOM-induced membrane leakiness is however much reduced compared to that of authentic melittin. The secondary structure of the ri-melittin is not changed when riDOM is transferred from water to the membrane and displays a large fraction of β-structure. The (31)P NMR spectrum of the nanoparticle is however transformed into a typical bilayer spectrum. The Gibbs free energy of riDOM binding to bilayer membranes is -8.0 to -10.0kcal/mol which corresponds to the partition energy of just one fatty acyl chain. Half of the hydrophobic surface of the riDOM lipid extension with its 2 oleic acyl chains is therefore involved in a lipid-peptide interaction. This packing arrangement guarantees a good solubility of riDOM both in the aqueous and in the membrane phase. The membrane binding enthalpy is small and riDOM binding is thus entropy-driven.

Incorporation of 2,3-diaminopropionic acid into linear cationic amphipathic peptides produces pH-sensitive vectors

Nonviral vectors that harness the change in pH in endosomes, are increasingly being used to deliver cargoes, including nucleic acids, into mammalian cells. Here we present evidence that the pK(a) of the beta-NH(2) in 2,3-diaminopropionic acid (Dap) is sufficiently lowered, when Dap is incorporated into peptides, that its protonation state is sensitive to the pH changes that occur during endosomal acidification. The lowered pK(a) of around 6.3 is stabilized by the increased electron-withdrawing effect of the peptide bonds, by intermolecular hydrogen bonding and from contributions arising from the peptide conformation. These include mixed polar/apolar environments, Coulombic interactions and intermolecular hydrogen bonding. Changes in the charged state are therefore expected between pH 5 and 7, and large-scale conformational changes are observed in Dap-rich peptides, in contrast to analogues containing lysine or ornithine, when the pH is altered through this range. These physical properties confer a robust gene-delivery capability on designed cationic amphipathic peptides that incorporate Dap.

Thermodynamics of melittin binding to lipid bilayers. Aggregation and pore formation

Lipid membranes act as catalysts for protein folding. Both alpha-helical and beta-sheet structures can be induced by the interaction of peptides or proteins with lipid surfaces. Melittin, the main component of bee venom, is a particularly well-studied example for the membrane-induced random coil-to-alpha-helix transition. Melittin in water adopts essentially a random coil conformation. The cationic amphipathic molecule has a high affinity for neutral and anionic lipid membranes and exhibits approximately 50-65% alpha-helix conformation in the membrane-bound state. At higher melittin concentrations, the peptide forms aggregates or pores in the membrane. In spite of the long-standing interest in melittin-lipid interactions, no systematic thermodynamic study is available. This is probably caused by the complexity of the binding process. Melittin binding to lipid vesicles is fast and occurs within milliseconds, but the binding process involves at least four steps, namely, (i) the electrostatic attraction of the cationic peptide to an anionic membrane surface, (ii) the hydrophobic insertion into the lipid membrane, (iii) the conformational change from random coil to alpha-helix, and (iv) peptide aggregation in the lipid phase. We have combined microelectrophoresis (measurement of the zeta potential), isothermal titration calorimetry, and circular dichroism spectroscopy to provide a thermodynamic analysis of the individual binding steps. We have compared melittin with a synthetic analogue, [D]-V(5,8),I(17),K(21)-melittin, for which alpha-helix formation is suppressed and replaced by beta-structure formation. The comparison reveals that the thermodynamic parameters for the membrane-induced alpha-helix formation of melittin are identical to those observed earlier for other peptides with an enthalpy h(helix) of -0.7 kcal/mol and a free energy g(helix) of -0.2 kcal/mol per peptide residue. These thermodynamic parameters hence appear to be of general validity for lipid-induced membrane folding. As g(helix) is negative, it further follows that helix formation leads to an enhanced membrane binding for the peptides or proteins involved. In this study, melittin binds by approximately 2 orders of magnitude better to the lipid membrane than [D]-V(5,8),I(17),K(21)-melittin which cannot form an alpha-helix. We also found conditions under which the isothermal titration experiment reports only the aggregation process. Melittin aggregation is an entropy-driven process with an endothermic heat of reaction (DeltaH(agg)) of approximately 2 kcal/mol and an aggregation constant of 20-40 M(-1).

Application of natural antimicrobials for food preservation

In this review, antimicrobials from a range of plant, animal, and microbial sources are reviewed along with their potential applications in food systems. Chemical and biochemical antimicrobial compounds derived from these natural sources and their activity against a range of pathogenic and spoilage microorganisms pertinent to food, together with their effects on food organoleptic properties, are outlined. Factors influencing the antimicrobial activity of such agents are discussed including extraction methods, molecular weight, and agent origin. These issues are considered in conjunction with the latest developments in the quantification of the minimum inhibitory (and noninhibitory) concentration of antimicrobials and/or their components. Natural antimicrobials can be used alone or in combination with other novel preservation technologies to facilitate the replacement of traditional approaches. Research priorities and future trends focusing on the impact of product formulation, intrinsic product parameters, and extrinsic storage parameters on the design of efficient food preservation systems are also presented.

Melittin-lipid bilayer interactions and the role of cholesterol

The membrane-destabilizing effect of the peptide melittin on phosphatidylcholine membranes is modulated by the presence of cholesterol. This investigation shows that inclusion of 40 mol % cholesterol in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine or 1,2-dioleoyl-sn-glycero-3-phosphocholine liposomes reduces melittin's affinity for the membrane. It is significant that the presence of cholesterol does not increase the amount of membrane-associated melittin needed to cause maximum leakage from, or major structural rearrangements of, the liposomes. Furthermore, comparison of microscopy and leakage data suggests that melittin-induced leakage occurs via different mechanisms in the cholesterol-free and cholesterol-supplemented systems. In the absence of cholesterol, leakage of carboxyfluorescein takes place from intact liposomes in a manner compatible with the presence of small melittin-induced pores. In the presence of cholesterol, on the other hand, adsorption of the peptide causes complete membrane disruption and the formation of long-lived open-bilayer structures. Moreover, in the case of cholesterol-supplemented systems, melittin induces pronounced liposome aggregation. Cryotransmission electron microscopy was used, together with ellipsometry, circular dichroism, turbidity, and leakage measurements, to investigate the effects of melittin on phosphatidylcholine membranes in the absence and presence of cholesterol. The melittin partitioning behavior in the membrane systems was estimated by means of steady-state fluorescence spectroscopy measurements.

Melittin interaction with sulfated cell surface sugars

Melittin is a 26-residue cationic peptide with cytolytic and antimicrobial properties. Studies on the action mechanism of melittin have focused almost exclusively on the membrane-perturbing properties of this peptide, investigating in detail the melittin-lipid interaction. Here, we report physical-chemical studies on an alternative mechanism by which melittin could interact with the cell membrane. As the outer surface of many cells is decorated with anionic (sulfated) glycosaminoglycans (GAGs), a strong Coulombic interaction between the two oppositely charged molecules can be envisaged. Indeed, the present study using isothermal titration calorimetry reveals a high affinity of melittin for several GAGs, that is, heparan sulfate (HS), dermatan sulfate, and heparin. The microscopic binding constant of melittin for HS is 2.4 x 10 (5) M (-1), the reaction enthalpy is Delta H melittin (0) = -1.50 kcal/mol, and the peptide-to-HS stoichiometry is approximately 11 at 10 mM Tris, 100 mM NaCl at pH 7.4 and 28 degrees C. Delta H melittin (0) is characterized by a molar heat capacity of Delta C P (0) = -227 cal mol (-1) K (-1). The large negative heat capacity change indicates that hydrophobic interactions must also be involved in the binding of melittin to HS. Circular dichroism spectroscopy demonstrates that the binding of the peptide to HS induces a conformational change to a predominantly alpha-helical structure. A model for the melittin-HS complex is presented. Melittin binding was compared with that of magainin 2 and nisin Z to HS. Magainin 2 is known for its antimicrobial properties, but it does not cause lysis of the eukaryotic cells. Nisin Z shows activity against various Gram-positive bacteria. Isothermal titration calorimetry demonstrates that magainin 2 and nisin Z do not bind to HS (5-50 degrees C, 10 mM Tris, and 100 mM NaCl at pH 7.4).

Melittin: a membrane-active peptide with diverse functions

Melittin is the principal toxic component in the venom of the European honey bee Apis mellifera and is a cationic, hemolytic peptide. It is a small linear peptide composed of 26 amino acid residues in which the amino-terminal region is predominantly hydrophobic whereas the carboxy-terminal region is hydrophilic due to the presence of a stretch of positively charged amino acids. This amphiphilic property of melittin has resulted in melittin being used as a suitable model peptide for monitoring lipid-protein interactions in membranes. In this review, the solution and membrane properties of melittin are highlighted, with an emphasis on melittin-membrane interaction using biophysical approaches. The recent applications of melittin in various cellular processes are discussed.

Conformational sampling of peptides in cellular environments

Biological systems provide a complex environment that can be understood in terms of its dielectric properties. High concentrations of macromolecules and cosolvents effectively reduce the dielectric constant of cellular environments, thereby affecting the conformational sampling of biomolecules. To examine this effect in more detail, the conformational preference of alanine dipeptide, poly-alanine, and melittin in different dielectric environments is studied with computer simulations based on recently developed generalized Born methodology. Results from these simulations suggest that extended conformations are favored over alpha-helical conformations at the dipeptide level at and below dielectric constants of 5-10. Furthermore, lower-dielectric environments begin to significantly stabilize helical structures in poly-alanine at epsilon = 20. In the more complex peptide melittin, different dielectric environments shift the equilibrium between two main conformations: a nearly fully extended helix that is most stable in low dielectrics and a compact, V-shaped conformation consisting of two helices that is preferred in higher dielectric environments. An additional conformation is only found to be significantly populated at intermediate dielectric constants. Good agreement with previous studies of different peptides in specific, less-polar solvent environments, suggest that helix stabilization and shifts in conformational preferences in such environments are primarily due to a reduced dielectric environment rather than specific molecular details. The findings presented here make predictions of how peptide sampling may be altered in dense cellular environments with reduced dielectric response.

Potential therapeutic applications of magainins and other antimicrobial agents of animal origin

Magainins are a family of linear, amphipathic, cationic antimicrobial peptides, 21 to 27 residues in length, found in the skin of Xenopus laevis. They kill microbial targets through disruption of membrane permeability. They exhibit selectivity, on the basis of their affinity for membranes which contain accessible acidic phospholipids, a property characterizing the cytoplasmic membranes of many species of bacteria. Magainins are broad-spectrum antimicrobial agents exhibiting cidal activity against Gram-negative and Gram-positive bacteria, fungi and protozoa. In addition these peptides lyse many types of murine and human cancer cells at concentrations 5-10-fold lower than normal human cells. Because of their selectivity, broad spectrum, low degree of bacterial resistance and ease of chemical synthesis, magainins are being developed as human therapeutic agents. The most advanced candidate is MSI-78, a 22-residue magainin analogue. This peptide is currently in human Phase IIb/III clinical trials in studies intended to evaluate its efficacy as a topical agent for the treatment of impetigo. Preclinical studies have demonstrated that analogues of magainin exhibit activity in vivo against malignant melanoma and ovarian cancer cells in mouse models. Intravenous administration of several magainin analogues has been shown to treat effectively systemic Escherichia coli infections in the mouse.

Antibacterial properties of dermaseptin S4 derivatives under extreme incubation conditions

Antibacterial properties of the frog-derived peptide dermaseptin S4 and a series of synthetic derivatives against the food pathogen Escherichia coli O157:H7 were investigated under extreme incubation conditions. The 28-mer analog K4K20S4 (P28) displayed an MIC of 8 microM and rapid bactericidal kinetics under standard culture conditions. Potent bactericidal properties were maintained at high salt concentrations, under acidic or basic conditions, and at extreme temperatures. The N-terminal 14-mer sequence (P14) displayed higher potency (MIC, 4 microM) but only within a narrow range of incubation conditions, pointing to the importance of the C-terminal domain of P28. The potency range was reextended upon conjugation of aminododecanoic acid to P14. The resulting lipopeptide was even more potent (MIC, 2 microM) and affected bacterial viability under most of the conditions tested, including in commercial apple juice. The mechanistic implications of peptides' hydrophobicity, charge, structure, and binding to an idealized membrane were probed and are discussed here. Collectively, the data indicate interest in simple peptide-based compounds for design of antimicrobials that affect pathogens under a variable range of incubation conditions.

Effect of ionic strength on folding and aggregation of the hemolytic peptide melittin in solution

Melittin is a cationic, amphipathic, hemolytic peptide composed of 26 amino acid residues. It is intrinsically fluorescent due to the presence of a single tryptophan residue, which has been shown to be crucial for its hemolytic activity. It undergoes a structural transition from a random coil monomer to an alpha-helical tetramer at high ionic strength. Although the aggregation behavior of melittin in solution is well characterized, dynamic information associated with the aggregation of melittin is lacking. In this paper, we have monitored the effect of ionic strength on the dynamics and aggregation behavior of melittin in aqueous solution by utilizing sensitive fluorescence approaches, which include the red edge excitation shift (REES) approach. Importantly, we demonstrate that REES is sensitive to the self-association of melittin induced by ionic strength. The change in environment experienced by melittin tryptophan(s) is supported by changes in fluorescence emission maximum, polarization, and lifetime. In addition, the accessibility of the tryptophan residue was probed by fluorescence quenching experiments using acrylamide and trichloroethanol as soluble and hydrophobic quenchers, respectively. Circular dichroism studies confirm the ionic strength-induced change in the secondary structure of melittin. Taken together, these results constitute the first report showing that REES could be used as a sensitive tool to monitor the aggregation behavior of melittin in particular and other proteins and peptides in general.

Ultrafast Hydration Dynamics in Melittin Folding and Aggregation: Helix Formation and Tetramer Self-Assembly

Melittin, an amphipathic peptide from honeybee venom, consists of 26 amino acid residues and adopts different conformations from a random coil, to an alpha-helix, and to a self-assembled tetramer under certain aqueous environments. We report here our systematic studies of the hydration dynamics in these conformations using single intrinsic tryptophan (W19) as a molecular probe. With femtosecond resolution, we observed the solvation dynamics occurring in 0.62 and 14.7 ps in a random-coiled primary structure. The former represents bulklike water motion, and the latter reflects surface-type hydration dynamics of proteins. As a comparison, a model tripeptide (KWK) was also studied. At a membrane-water interface, melittin folds into a secondary alpha-helical structure, and the interfacial water motion was found to take as long as 114 ps, indicating a well-ordered water structure along the membrane surface. In high-salt aqueous solution, the dielectric screening and ionic solvation promote the hydrophobic core collapse in melittin aggregation and facilitate the tetramer formation. This self-assembled tertiary structure is also stabilized by the strong hydrophilic interactions of charged C-terminal residues and associated ions with water molecules in the two assembled regions. The hydration dynamics was observed to occur in 87 ps, significantly slower than typical water relaxation at protein surfaces but similar to water motion at membrane interfaces. Thus, the observed time scale of approximately 100 ps probably implies appropriate water mobility for mediating the formation of high-order structures of melittin in an alpha-helix and a self-assembled tetramer. These results elucidate the critical role of hydration dynamics in peptide conformational transitions and protein structural stability and integrity.

Melittin as model system for probing interactions between proteins and cyclodextrins

Cylcodextrin sugars are cyclic sugars that have a hydrophilic exterior and a hydrophobic center. This enables cyclodextrins to solubilize hydrophobic molecules in aqueous media. Cyclodextrins may inhibit aggregation by intercalating surface aromatic residues and competing with interprotein aromatic clusters (pi-pi interactions). In order to investigate this concept, the interaction of hydroxypropyl-beta-cyclodextrin (HPBCD) with melittin is studied with steady-state and time-resolved fluorescence, fluorescence polarization, circular dichroism, and IR spectroscopy. HPBCD inhibits the aggregation of melittin. This inhibition and the spectroscopic results are consistent with the lone aromatic tryptophan of the peptide being intercalated within HPBCD.

Effective energy function for proteins in lipid membranes

A simple extension of the EEF1 energy function to heterogeneous membrane-aqueous media is proposed. The extension consists of (a) development of solvation parameters for a nonpolar phase using experimental data for the transfer of amino acid side-chains from water to cyclohexane, (b) introduction of a heterogeneous membrane-aqueous system by making the reference solvation free energy of each atom dependent on the vertical coordinate, (c) a modification of the distance-dependent dielectric model to account for reduced screening of electrostatic interactions in the membrane, and (d) an adjustment of the EEF1 aqueous model in light of recent calculations of the potential of mean force between amino acid side-chains in water. The electrostatic model is adjusted to match experimental observations for polyalanine, polyleucine, and the glycophorin A dimer. The resulting energy function (IMM1) reproduces the preference of Trp and Tyr for the membrane interface, gives reasonable energies of insertion into or adsorption onto a membrane, and allows stable 1-ns MD simulations of the glycophorin A dimer. We find that the lowest-energy orientation of melittin in bilayers varies, depending on the thickness of the hydrocarbon layer.

Conformational and thermodynamic properties of peptide binding to the human S100P protein

S100P is a member of the S100 subfamily of calcium-binding proteins that are believed to be associated with various diseases, and in particular deregulation of S100P expression has been documented for prostate and breast cancer. Previously, we characterized the effects of metal binding on the conformational properties of S100P and proposed that S100P could function as a Ca2+ conformational switch. In this study we used fluorescence and CD spectroscopies and isothermal titration calorimetry to characterize the target-recognition properties of S100P using a model peptide, melittin. Based on these experimental data we show that S100P and melittin can interact in a Ca2+-dependent and -independent manner. Ca2+-independent binding occurs with low affinity (Kd approximately 0.2 mM), has a stoichiometry of four melittin molecules per S100P dimer and is presumably driven by favorable electrostatic interactions between the acidic protein and the basic peptide. In contrast, Ca2+-dependent binding of melittin to S100P occurs with high affinity (Kd approximately 5 microM) has a stoichiometry of two molecules of melittin per S100P dimer, appears to have positive cooperativity, and is driven by hydrophobic interactions. Furthermore, Ca2+-dependent S100P-melittin complex formation is accompanied by significant conformational changes: Melittin, otherwise unstructured in solution, adopts a helical conformation upon interaction with Ca2+-S100P. These results support a model for the Ca2+-dependent conformational switch in S100P for functional target recognition.

Thermodynamics of Na+ binding to coagulation serine proteases

The sodium binding to serine proteases triggers a conformational change in the proteins that enhances the catalytic activity of the enzymes. The interaction of the cation with the protein is mediated by the hydrogen-bonding network of water molecules that embed the Na+ site. We pointed out the crucial role of the insertion loop 186a-d and the I16-D194 ion pair in the stabilization of sodium binding pocket in thrombin. This paper contributes to better explain the molecular mechanism of sodium binding for different serine proteases leading to the identification of the structural changes necessary to engineer a functional Na+ site and regulate catalytic activity in serine proteases.

Ultraviolet Raman examination of the environmental dependence of bombolitin I and bombolitin III secondary structure

Bombolitin I and III (BI and BIII) are small amphiphilic peptides isolated from bumblebee venom. Although they exist in predominately nonhelical conformations in dilute aqueous solutions, we demonstrate, using UV Raman spectroscopy, that they become predominately alpha-helical in solution at pH > 10, in high ionic strength solutions, and in the presence of trifluoroethanol (TFE) and dodecylphosphocholine (DPC) micelles. In this paper, we examine the effects of electrostatic and hydrophobic interactions that control folding of BI and BIII by systematically monitoring their secondary structures as a function of solution conditions. We determine the BI and BIII secondary structure contents by using the quantitative UV Raman methodology of Chi et al. (1998. Biochemistry. 37:2854-2864). Our findings suggest that the alpha-helix turn in BIII at neutral pH is stabilized by a salt bridge between residues Asp2 and Lys5. This initial alpha-helical turn results in different BI and BIII alpha-helical folding mechanisms observed in high pH and high salt concentrations: BIII folds from its single alpha-helix turn close to its N-terminal, whereas the BI alpha-helix probably nucleates within the C-terminal half. We also used quasielastic light scattering to demonstrate that the BI and BIII alpha-helix formation in 0.2 M Ca(ClO4)2 is accompanied by formation of trimers and hexamers, respectively.

Effective energy function for proteins in solution

A Gaussian solvent-exclusion model for the solvation free energy is developed. It is based on theoretical considerations and parametrized with experimental data. When combined with the CHARMM 19 polar hydrogen energy function, it provides an effective energy function (EEF1) for proteins in solution. The solvation model assumes that the solvation free energy of a protein molecule is a sum of group contributions, which are determined from values for small model compounds. For charged groups, the self-energy contribution is accounted for primarily by the exclusion model. Ionic side-chains are neutralized, and a distance-dependent dielectric constant is used to approximate the charge-charge interactions in solution. The resulting EEF1 is subjected to a number of tests. Molecular dynamics simulations at room temperature of several proteins in their native conformation are performed, and stable trajectories are obtained. The deviations from the experimental structures are similar to those observed in explicit water simulations. The calculated enthalpy of unfolding of a polyalanine helix is found to be in good agreement with experimental data. Results reported elsewhere show that EEF1 clearly distinguishes correctly from incorrectly folded proteins, both in static energy evaluations and in molecular dynamics simulations and that unfolding pathways obtained by high-temperature molecular dynamics simulations agree with those obtained by explicit water simulations. Thus, this energy function appears to provide a realistic first approximation to the effective energy hypersurface of proteins.

Hydrophobic hydration of amphipathic peptides

Biomolecular surfaces and interfaces are commonly found with apolar character. The hydrophobic effect thus plays a crucial role in processes involving association with biomolecular surfaces in the cellular environment. By computer simulation, we compared the hydrogen bonding structures and energetics of the proximal hydration shells of the monomer and dimer from a recent study of an extrinsic membrane peptide, melittin. The two peptides were studied in their amphipathic alpha-helical forms, which possess extended hydrophobic surfaces characterized by different topography. The topography of the peptide-water interface was found to be critical in determining the enthalpic nature of hydrophobic hydration. This topographical dependence has far-reaching implications in the regulation of bioactivities in the presence of amphipathicity. This result also engenders reconsideration of the validity of using free energy parameters that depend solely on the chemical nature of constituent moieties in characterizing hydrophobic hydration of proteins and biomolecules in general.

Structural characterisation of the natural membrane-bound state of melittin: a fluorescence study of a dansylated analogue

The binding of a dansylated analogue of melittin (DNC-melittin) to natural membranes is described. The cytolytic peptide from honey bee venom melittin was enzymatically labelled in its glutamine-25 with the fluorescent probe monodansylcadaverine using guinea pig liver transglutaminase. The labelled peptide was characterised functionally in cytolytic assays, and spectroscopically by circular dichroism and fluorescence. The behaviour of DNC-melittin was, in all respects, indistinguishable from that of the naturally occurring peptide. We used resonance energy transfer to measure the state of aggregation of melittin on the membrane plane in synthetic and natural lipid bilayers. When bound to erythrocyte ghost membranes, the extent of energy transfer was found to be equivalent to when bound to small unilamellar vesicles of phosphatidylcholine. Our results correlate best with a proposed model in which the initial interaction between melittin and the red blood cells could be merely electrostatic and the peptide remains in a low alpha-helical conformation. The next step would be a peptide stabilisation in the membrane in a monomeric alpha-helical conformation that would imply the collapse of the membrane structure and liberation of the cell contents.

A thermodynamic analysis of conformational change due to the alpha 2 beta 2 complex formation of tryptophan synthase

A characteristic property of the tryptophan synthase alpha 2 beta 2 complex is the mutual activation of the alpha and beta subunit upon complex formation. It has been speculated that this mutual activation results from the conformational change due to the alpha/beta subunit interaction. To elucidate this mechanism, we investigated the thermodynamic parameters of association for the various combinations of the alpha and beta subunits from Escherichia coli and Salmonella typhimurium using isothermal titration calorimetry. The negative association enthalpy of the S. typhimurium alpha subunit with the beta subunit from E. coli (or S. typhimurium) was about 20 kJ mol-1 larger than that of the E. coli alpha subunit at 40 degrees C. However, the favorable enthalpy of the S. typhimurium alpha subunit was perfectly compensated by the unfavorable association entropy, therefore, the Gibbs energy of association was similar to that of the E. coli alpha subunit. Furthermore, the site-directed mutagenesis study revealed that a single mutation (K109N; [Asn109] alpha subunit) of the E coli alpha subunit at the subunit interface from E. coli to the S. typhimurium type could change the characteristics of the thermodynamic parameters of association to the S. typhimurium alpha subunit type. The heat-capacity changes of the association of the alpha subunit with the beta subunit were quite great, 6.37-8.21 kJ mol-1 K-1, compared with that due to a decrease in accessible surface area in the subunit interface. The analysis of the thermodynamic parameters of association suggested that the complex formation couples with the folding (rearrangements) of the alpha subunit monomer or/and beta subunit dimer.