Effects of time and concentration on mortality of phosphine-resistant Sitophilus oryzae (L) fumigated with phosphine

Fabrication and application of carrier-free and carrier-based nanopesticides in pest management

Pesticides are widely used for pest control to promote sustained and stable growth of agricultural production. However, indiscriminate pesticide usage poses a great threat to environmental and human health. In recent years, nanotechnology has shown the ability to increase the performance of conventional pesticides and has great potential for improving adhesion to crop foliage, solubility, stability, targeted delivery, and so forth. This review discusses two types of nanopesticides, namely, carrier-free nanopesticides and carrier-based nanopesticides, that can precisely release necessary and sufficient amounts of active ingredients. At first, the basic characterization and preparation methods of these two distinct types of nanopesticides are briefly summarized. Subsequently, current applications and future perspectives on scientific examples and strategies for promoting the usage efficacy and reducing the environmental risks of these nanopesticides were also described. Overall, nanopesticides can promote higher crop yields and lay the foundation for sustainable agriculture and global food security.

Pesticidal Toxicity of Phosphine and Its Interaction with Other Pest Control Treatments

Phosphine is the most widely used fumigant for stored grains due to a lack of better alternatives, all of which have serious shortcomings that restrict their use. The extensive use of phosphine has led to the development of resistance among insect pests of grain, which threatens its status as a reliable fumigant. Understanding the mode of action of phosphine as well as its resistance mechanisms provides insight that may lead to improved phosphine efficacy and pest control strategies. The mechanisms of action in phosphine vary from disrupting metabolism and oxidative stress to neurotoxicity. Phosphine resistance is genetically inherited and is mediated by the mitochondrial dihydrolipoamide dehydrogenase complex. In this regard, laboratory studies have revealed treatments that synergistically enhance phosphine toxicity that may be used to suppress resistance development and enhance efficacy. Here, we discuss the reported phosphine modes of action, mechanisms of resistance and interactions with other treatments.

Nanomaterials for Postharvest Management of Insect Pests: Current State and Future Perspectives

Globally, between one quarter and one-third of total grains produced each year are lost during storage mainly through infestation of insect pests. Among the available control options such as chemical and physical techniques, fumigation with aluminum phosphide (AlP) is so far considered the best control strategy against storage insect pests. However, these insect pests are now developing resistance against AIP due to its indiscriminate use due to non-availability of any effective alternative control option. Resistance to AIP among storage insect pests is increasing, and its inhalation has shown adverse effects on animals and human beings. Nanotechnology has opened up a wide range of opportunities in various fields such as agriculture (pesticides, fertilizers, etc.), pharmaceuticals, and electronics. One of the applications of nanotechnology is the usage of nanomaterial-based insecticide formulations for mitigating field and storage insect pests. Several formulations, namely, nanoemulsions, nanosuspensions, controlled release formulations, and solid-based nanopesticides, have been developed with different modes of action and application. The major advantage is their small size which helps in proper spreading on the pest surface, and thus, better action than conventional pesticides is achieved. Besides their minute size, these have no or reduced harmful effects on non-target species. Nanopesticides can therefore provide green and efficient alternatives for the management of insect pests of field and storage. However, an outcry against the utilization of nano-based pesticides is also revealed. It is considered by some that nano-insecticides may also have hazardous effects on humans as well as on the environment. Due to limited available data, nanopesticides have become a double-edged weapon. Therefore, nanomaterials need to be evaluated extensively for their large-scale adoption. In this article, we reviewed the nanoformulations that are developed and have proved effective against the insect pests under postharvest storage of grains.

Statistical approach to synthesise biogenic silica nanoparticles from rice husk and conjugated with Justicia adhatoda extract as green, slow-release biocide

Biogenic silica synthesised from rice husk was used as a controlled release system of an eco-friendly biocide consisting of a Justicia adhatoda extract. Fourier-transform infrared spectroscopy (FTIR) indicated the presence of ester bonds between the silica support and the conjugated Justicia adhatoda extract. Surface area analysis and microscopy confirmed a high level of Justicia adhatoda extract loading in the silica support. The phytochemical investigation of Justicia adhatoda was done by Gas chromatography-mass spectrometry (GC-MS) spectroscopy. Moreover, compared with the naked biogenic silica nanoparticles, a better thermal stability was determined for the conjugated system of the extracted compounds. Trial of kinetic release of silica: Justicia adhatoda ∼29% of loaded Justicia adhatoda was released within 1 h and then the rate of release became slow. Net release of Justicia adhatoda was observed up to 50% within 7 h. The Justicia adhatoda compounds released from silica also showed the improved mortality rate against stored product pest rice weevil (Sitophilus oryzae).

A co-fumigation strategy utilizing reduced rates of phosphine (PH3 ) and sulfuryl fluoride (SF) to control strongly resistant rusty grain beetle, Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae)

BACKGROUND

Managing resistance to phosphine (PH₃ ) in rusty grain beetle, Cryptolestes ferrugineus, is challenging, as strongly resistant insects of this species require very high concentrations over lengthy exposure periods (>10 days). Recently, approaches that enhance the efficacy of PH₃ have gained momentum to control this pest, especially co-fumigations. In this study, efficacy of co-fumigating PH₃ with another commercially available fumigant, sulfuryl fluoride (SF), has been evaluated against adults and eggs of two PH₃ -resistant strains of C. ferrugineus. Concentrations of the mixture, representing lower than current application rates of both fumigants, were tested towards its field use.

RESULTS

Co-fumigation of PH₃ with SF was achieved in two patterns: over a continuous exposure period of 168 h simultaneously and sequentially over two periods of 78 h, in which insects were exposed to SF first followed by PH₃ with 12 h aeration in-between. Results of simultaneous fumigations identified two effective co-fumigation rates, SF 185 + PH₃ 168 g hm^-3 and SF 370 + PH₃ 84 g hm^-3 that yielded complete control of adults and eggs. These two rates also were equally effective when they were applied sequentially and produced consistent results. Irrespective of application methods, concentrations of both PH₃ and SF failed individually in achieving complete mortality of either adults or eggs or both.

CONCLUSION

Our results confirmed that a co-fumigation strategy involving half the current standard rate of PH₃ (84 g hm^-3 ) with one-fourth of the current maximal registered rate of SF (370 g hm^-3 ) can provide effective control of strongly PH₃ -resistant C. ferrugineus.

Delayed mortality, resistance and the sweet spot, as the good, the bad and the ugly in phosphine use

Phosphine is the most commonly used gas for fumigation for durable commodities globally, but there is still inadequate information regarding its efficacy in conjunction with proper concentration monitoring. In a series of bioassays, insect mortality after specific exposure intervals to phosphine in selected species was examined, as well as the appearance of the so called "sweet spot". The species that were tested were: Oryzaephilus surinamensis (L.), Tribolium castaneum (Herbst), Sitophilus oryzae (L.) and Rhyzopertha dominica (F.) with populations that had different levels of phosphine resistance. Evaluation was conducted by using the Phosphine Tolerance Test (PTT), with exposure of the adult stage for 15, 30, 60, 90, 150 and 300 min at 3000 ppm. At the end of these intervals (separate bioassays for each time interval), the insects were transferred to Petri dishes, in which recovery was recorded at different time intervals (2 h, 1, 2 and 7 days). The majority of susceptible populations of all species were instantly immobilized even in the shortest exposure period (15 min), in contrast with resistant populations that were active even after 300 min. After exposure to phosphine, populations and exposure time affected mortality of susceptible populations, whereas resistant populations recovered regardless of species and exposure time. Additional bioassays at the concentrations of 500, 1000, 2000 and 3000 ppm for 1, 3, 5, 20, 30 and 40 h showed the presence of the "sweet spot", i.e., decrease of mortality with the increase of concentration. In fact, for most of the tested species, the "sweet spot" appeared in 1000 and 2000 ppm at a 5-h exposure time, regardless of the level of resistance to phosphine. This observation is particularly important both in terms of the assessment of resistance and in the context of non-linear recovery at elevated concentrations, indicating the occurrence of strong hormetic reversals in phosphine efficacy.

RNA-seq Analysis Reveals Mitochondrial and Cuticular Protein Genes Are Associated with Phosphine Resistance in the Rusty Grain Beetle (Coleoptera:Laemophloeidae)

The rusty grain beetle, Cryptolestes ferrugineus (Stephens), is a serious pest of stored grain, which has developed high levels of resistance to phosphine. In this study, five geographically distant populations of C. ferrugineus had been collected in China, specifically in granaries where phosphine fumigant is used for pest control, and they showed a high resistance ratio up to 1,907 (LC50 = 21.0 mg/liter). Then, a reference transcriptome was constructed to use as a basis for investigating the molecular mechanisms of phosphine resistance in this species, which consisted of 47,006 unigenes with a mean length of 1,090. Subsequently, the RNA-Seq analysis of individuals from the most susceptible and resistant populations led to the identification of 54 genes that are differentially expressed. GO and KEGG analysis demonstrated that genes associated with mitochondrial and respiration functions were significantly enriched. Also, the 'structural constituent of cuticle' term was annotated in the GO enrichment analysis and further qRT-PCR confirmed that the expression levels of nine cuticular protein genes were significantly increased in the resistant population. In conclusion, we present here a transcriptome-wide overview of gene expression changes between resistant and susceptible populations of C. ferrugineus, and this in turn documents that mitochondria and cuticular protein genes may play together a crucial role in phosphine resistance. Further gene function analysis should enable the provision of advice to expedite resistance management decisions.

Unique genetic variants in dihydrolipoamide dehydrogenase (dld) gene confer strong resistance to phosphine in the rusty grain beetle, Cryptolestes ferrugineus (Stephens)

The rusty grain beetle, Cryptolestes ferrugineus, a major pest of stored commodities, has developed very high levels (>1000×) of resistance to the fumigant phosphine. Resistance in this species is remarkably stronger than reported in any other stored product pests demanding the need to understand the molecular basis of this trait. Previous genetic studies in other grain insect pests identified specific variants in two major genes, rph1 and rph2 in conferring the strong resistance trait. However, in C. ferrugineus, although the gene, rph1 was identified as cytochrome-b5-fatty acid desaturase, the rph2 gene has not been reported so far. We tested the candidate gene for rph2, dihydrolipoamide dehydrogenase (dld) using the recently published transcriptome of C. ferrugineus and identified three variants, L73N and A355G + D360H, a haplotype, conferring resistance in this species. Our sequence analysis in resistant strain and phosphine selected resistant survivors indicates that these variants occur either alone as a homozygote or a mixture of heterozygotes (i.e complex heterozygotes) both conferring strong resistance. We also found that one of the three variants, possibly L73N expressing "dominant" trait at low frequency in resistant insects. Comparison of dld sequences between Australian and Chinese resistant strain of this species confirmed that the identified variants are highly conserved. Our fitness analysis indicated that resistant insects may not incur significant biological costs in the absence of phosphine selection for 19 generations. Thus, we propose that the observed high levels of resistance in C. ferrugineus could be primarily due to the characteristics of three unique variants, L73N and A355G + D360H within dld.

High-dose strategies for managing phosphine-resistant populations of Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae)

BACKGROUND

Rhyzopertha dominica is a serious pest of stored grains and many populations have resistance to the fumigant phosphine. Some populations contain beetles with a 'strong resistance' phenotype. Recent work found the LC₅₀ values for two strong-resistant populations recently studied in North America, Belle Glade and Minneapolis were 100- and 595-fold higher, respectively, compared to LC₅₀ of a lab-susceptible strain. Populations with 'weak-resistant' phenotypes had LC₅₀ values 5- to 10-fold that of a susceptible strain. The work reported below aimed to determine the minimum phosphine concentrations and number of days of exposure needed to effectively control all life stages of representative weak- and strong-resistant strains, and then to recommend the treatment conditions needed to control strongly phosphine-resistant R. dominica in pest populations.

RESULTS

A dose-mortality assay estimated that phosphine fumigation over 48 h using 730-870 ppm at 25° C would control adults of both strongly resistant R. dominica populations. Fumigations with mixed life stage cultures found 200 ppm killed all susceptible and weak-resistant beetles in 2 days, but the strong-resistant Minneapolis and Belle Glade strains had substantial survivors at 200 ppm. Furthermore, the Belle Glade strain had beetles that survived 1000 ppm in 2-day fumigations. The strong-resistant Belle Glade strain needed nearly 10 days at over 400 ppm to have acceptable levels of control.

CONCLUSION

This study recommends protocols to manage strongly resistant R. dominica populations provided that a minimum phosphine concentration of 400 ppm be maintained at 25° C or higher for up to 10 days. © 2019 Society of Chemical Industry.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO2-NPs) were prepared via the sol–gel technique. SiO2-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO2-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, “Nitrogen (N), Phosphorus (P), and Potassium (K)” (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO2-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO2-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC50 and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO2-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO2-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO2-NPs, increased the highest mean values of agronomic characters. Therefore, SiO2-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Soil Application of Nano Silica on Maize Yield and Its Insecticidal Activity Against Some Stored Insects After the Post-Harvest

Maize is considered one of the most imperative cereal crops worldwide. In this work, high throughput silica nanoparticles (SiO₂-NPs) were prepared via the sol-gel technique. SiO₂-NPs were attained in a powder form followed by full analysis using the advanced tools (UV-vis, HR-TEM, SEM, XRD and zeta potential). To this end, SiO₂-NPs were applied as both nanofertilizer and pesticide against four common pests that infect the stored maize and cause severe damage to crops. As for nanofertilizers, the response of maize hybrid to mineral NPK, "Nitrogen (N), Phosphorus (P), and Potassium (K)" (0% = untreated, 50% of recommended dose and 100%), with different combinations of SiO₂-NPs; (0, 2.5, 5, 10 g/kg soil) was evaluated. Afterward, post-harvest, grains were stored and fumigated with different concentrations of SiO₂-NPs (0.0031, 0.0063. 0.25, 0.5, 1.0, 2.0, 2.5, 5, 10 g/kg) in order to identify LC₅₀ and mortality % of four common insects, namely Sitophilus oryzae, Rhizopertha dominica, Tribolium castaneum, and Orizaephilus surinamenisis. The results revealed that, using the recommended dose of 100%, mineral NPK showed the greatest mean values of plant height, chlorophyll content, yield, its components, and protein (%). By feeding the soil with SiO₂-NPs up to 10 g/kg, the best growth and yield enhancement of maize crop is noticed. Mineral NPK interacted with SiO₂-NPs, whereas the application of mineral NPK at the rate of 50% with 10 g/kg SiO₂-NPs, increased the highest mean values of agronomic characters. Therefore, SiO₂-NPs can be applied as a growth promoter, and in the meantime, as strong unconventional pesticides for crops during storage, with a very small and safe dose.

Resistance to the Fumigant Phosphine and Its Management in Insect Pests of Stored Products: A Global Perspective

Development of resistance in major grain insect pest species to the key fumigant phosphine (hydrogen phosphide) across the globe has put the viability and sustainability of phosphine in jeopardy. The resistance problem has been aggravated over the past two decades, due mostly to the lack of suitable alternatives matching the major attributes of phosphine, including its low price, ease of application, proven effectiveness against a broad pest spectrum, compatibility with most storage conditions, and international acceptance as a residue-free treatment. In this review, we critically analyze the published literature in the area of phosphine resistance with special emphasis on the methods available for detection of resistance, the genetic basis of resistance development, key management strategies, and research gaps that need to be addressed.

Development of a Quick Knockdown Test for Diagnosing Resistance to Phosphine in Sitophilus oryzae (Coleoptera: Curculionidae), a Major Pest of Stored Products

A key component in the management of resistance to fumigant phosphine in stored products pests is their early detection and implementation of control strategies. Currently, resistance testing involves exposing adults to a specific discriminating concentration over a fixed time period (20-48 h). Although it is widely adopted, this test takes significant time for assay preparation (up to 4 wk) as well as diagnosis (1-2 wk). To address these lacunae, we have established a 'quick knockdown test' using a key grain insect pest, rice weevil, Sitophilus oryzae (L.). Susceptible, weakly and strongly phosphine-resistant reference strains were exposed to a threshold concentration of phosphine over short exposure periods (min to h). The time to knockdown (KT) responses to phosphine were characterized at 2 (1,440 ppm) and 5 mg/liter (3,600 ppm). The time to 99.9% KT (KT99.9) at 2 mg/liter was 12.52 min for the susceptible adults, compared with 167.9 and 1,510 min in the case of weakly and strongly resistant phenotypes, respectively. As anticipated, increasing the concentration of phosphine to 5 mg/liter halved the KT99.9 (81.57 min) to separate weakly and strongly resistant populations than it was required at 2 mg/liter. We validated the KT99.9 value for the 5 mg/liter against field-derived populations of S. oryzae. The results were aligned with the existing Food and Agriculture Organization approach, confirming that the proposed 'quick test' is a reliable tool to rapidly diagnose resistance in this species.

Evaluation of Wireless Phosphine Sensors for Monitoring Fumigation Gas in Wheat Stored in Farm Bins

Fumigation of grain bins with phosphine tablets is one method of insect control for stored products. Monitoring the concentration of the toxic gas at many locations over several days for a given structure or container can be challenging. In this study, a commercially-available system that wirelessly measures phosphine was evaluated in small-scale and large-scale tests. Small-scale testing was performed to study the repeatability and accuracy of the sensors. The wireless sensors were within 30 ppm of each other, over a range of 700 ppm phosphine. Large-scale testing evaluated the system during the fumigation of wheat stored in 7 m diameter, 120 metric ton, steel grain bins. As a reference, monitoring lines were distributed at several positions and depths in the bin in order to sample phosphine gas concentrations. A series of three fumigation trials were performed, with each lasting for over six days. The wireless devices collected local phosphine concentrations and temperatures every two hours without assistance from personnel. Although the fumigation trials were significantly different in terms of patterns in gas concentration over time, the two sampling methods gave similar trendlines. However, the automated data provided a more detailed picture of the fumigation process. This information may help fumigation managers to better evaluate fumigations and assure successful insect control.

Potential of Co-Fumigation with Phosphine (PH3) and Sulfuryl Fluoride (SO2F2) for the Management of Strongly Phosphine-Resistant Insect Pests of Stored Grain

Resistance to phosphine (PH3) in key insect pests of stored grain is increasing, with a requirement for maintaining a dose as high as 1 mg l-1 for 14 d for effective fumigation, which is difficult to achieve under most commercial storage conditions. There is no suitable replacement for PH3, as most of the available alternatives suffer from specific weaknesses, creating an urgent need to increase the efficacy of this fumigant. One such possibility is co-fumigation of PH3 with another fumigant, sulfuryl fluoride (SO2F2-SF), with the goal of decreasing the time required for a successful fumigation. In this study, adult of two PH3-resistant strains in each of four key grain insect pests, Rhyzopertha dominica, (F.) (Coleoptera: Bostrichidae) Tribolium castaneum Herbst (Coleoptera: Tenebrionidae), Sitophilus oryzae (L.) (Coleoptera: Curculionidae), and Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae) were fumigated with PH3 and SF individually as well as in combinations at 25°C over 48 h. Mortality responses in each species were subjected to probit analysis to determine the LC50 and LC99.9 of PH3, SF, and PH3 + SF. Co-fumigation of PH3 with SF resulted in a 50% reduction of the PH3 concentration required to achieve 99.9% mortality in two pest species. For example, the PH3 + SF mixture, reduced the amount of PH3 required from 14.2-14.5 to 5.6-6.36 mg l-1 and from 2.71-5.03 to 0.93-1.2 mg l-1, respectively, for C. ferrugineus and S. oryzae. The overall mortality response to the PH3 + SF mixture followed an "additive model" suggesting that mutual enhancement in toxicity can be achieved with this mixture specifically to control PH3-resistant insects.

Phosphine resistance does not confer cross-resistance to sulfuryl fluoride in four major stored grain insect pests

BACKGROUND

Susceptibility to phosphine (PH₃ ) and sulfuryl fluoride (SF) and cross-resistance to SF were evaluated in two life stages (eggs and adults) of key grain insect pests, Rhyzopertha dominca (F.), Sitophilus oryzae (L.), Cryptolestes ferrugineus (Stephens), and Tribolium castaneum (Herbst). This study was performed with an aim to integrate SF into phosphine resistance management programmes in Australia.

RESULTS

Characterisation of susceptibility and resistance to phosphine in eggs and adults showed that C. ferrugineus was the most tolerant as well as resistant species. Mortality responses of eggs and adults to SF at 25 °C revealed T. castaneum to be the most tolerant species followed by S. oryzae, C. ferrugineus and R. dominica. A high dose range of SF, 50.8-62.2 mg L^-1 over 48 h, representing c (concentration) × t (time) products of 2438-2985 gh m^-3 , was required for complete control of eggs of T. castaneum, whereas eggs of the least tolerant R. dominca required only 630 gh m^-3 for 48 h (13.13 mg L^-1 ). Mortality response of eggs and adults of phosphine-resistant strains to SF in all four species confirmed the lack of cross-resistance to SF.

CONCLUSION

Our research concludes that phosphine resistance does not confer cross-resistance to SF in grain insect pests irrespective of the variation in levels of tolerance to SF itself or resistance to phosphine in their egg and adult stages. While our study confirms that SF has potential as a 'phosphine resistance breaker', the observed higher tolerance in eggs stresses the importance of developing SF fumigation protocols with longer exposure periods. © 2016 Society of Chemical Industry.

Gene Disruption Technologies Have the Potential to Transform Stored Product Insect Pest Control

Stored product insects feed on grains and processed commodities manufactured from grain post-harvest, reducing the nutritional value and contaminating food. Currently, the main defense against stored product insect pests is the pesticide fumigant phosphine. Phosphine is highly toxic to all animals, but is the most effective and economical control method, and thus is used extensively worldwide. However, many insect populations have become resistant to phosphine, in some cases to very high levels. New, environmentally benign and more effective control strategies are needed for stored product pests. RNA interference (RNAi) may overcome pesticide resistance by targeting the expression of genes that contribute to resistance in insects. Most data on RNAi in stored product insects is from the coleopteran genetic model, Tribolium castaneum, since it has a strong RNAi response via injection of double stranded RNA (dsRNA) in any life stage. Additionally, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) technology has been suggested as a potential resource for new pest control strategies. In this review we discuss background information on both gene disruption technologies and summarize the advances made in terms of molecular pest management in stored product insects, mainly T. castaneum, as well as complications and future needs.

Phosphine resistance in Australian Cryptolestes species (Coleoptera: Laemophloeidae): perspectives from mitochondrial DNA cytochrome oxidase I analysis

BACKGROUND

The flat grain beetle (FGB) species Cryptolestes ferrugineus, C. pusillus, C. pusilloides and C. turcicus are major stored-product pests worldwide, of which the first three are present in Australia. C. ferrugineus is also a species with high phosphine resistance status in various countries. Morphological identification of Cryptolestes species is difficult and represents an additional barrier to effective management of phosphine resistance in FGBs.

RESULT

Mitochondrial DNA cytochrome oxidase I (mtDNA COI) gene characterisation enabled differentiation of the four major FGB pest species through direct sequence comparison, and enabled the development of a PCR-RFLP method for rapid species differentiation. We detected two mtDNA haplotypes (Cunk-01, 02) present at low frequencies with an average nucleotide divergence rate of 0.079 ± 0.011 (SE) from C. pusillus. This nucleotide divergence rate is similar to that between C. ferrugineus and C. pusilloides (0.088 ± 0.012). Male and female genitalia morphologies of the Cunk-02 individuals indicated they were consistent with C. pusillus, yet DNA sequence analyses suggested species-level divergence. The mtDNA COI gene of phosphine-bioassayed, lab-reared F1 generation survivors supported the presence of strong phosphine resistance in C. ferrugineus, but unexpectedly also in C. pusilloides and C. pusillus F1 survivors.

CONCLUSION

We demonstrated the utility of molecular DNA techniques for differentiating closely related insect species, and its usefulness in assisting the management of pest insect species. The likely presence of a cryptic C. pusillus species in Australia and the possible development of strong phosphine resistance in Australian FGB pest species require further investigation. © 2014 Society of Chemical Industry.

Genetic Conservation of Phosphine Resistance in the Rice Weevil Sitophilus oryzae (L.)

High levels of resistance to phosphine in the rice weevil Sitophilus oryzae have been detected in Asian countries including China and Vietnam, however there is limited knowledge of the genetic mechanism of resistance in these strains. We find that the genetic basis of strong phosphine resistance is conserved between strains of S. oryzae from China, Vietnam, and Australia. Each of 4 strongly resistant strains has an identical amino acid variant in the encoded dihydrolipoamide dehydrogenase (DLD) enzyme that was previously identified as a resistance factor in Rhyzopertha dominica and Tribolium castaneum. The unique amino acid substitution, Asparagine > Threonine (N505T) of all strongly resistant S. oryzae corresponds to the position of an Asparagine > Histidine variant (N506H) that was previously reported in strongly resistant R. dominica. Progeny (F16 and F18) from 2 independent crosses showed absolute linkage of N505T to the strong resistance phenotype, indicating that if N505T was not itself the resistance variant that it resided within 1 or 2 genes of the resistance factor. Non-complementation between the strains confirmed the shared genetic basis of strong resistance, which was supported by the very similar level of resistance between the strains, with LC50 values ranging from 0.20 to 0.36 mg L(-1) for a 48-h exposure at 25 °C. Thus, the mechanism of high-level resistance to phosphine is strongly conserved between R. dominica, T. castaneum and S. oryzae. A fitness cost associated with strongly resistant allele was observed in segregating populations in the absence of selection.

Genetic characterization of field-evolved resistance to phosphine in the rusty grain beetle, Cryptolestes ferrugineus (Laemophloeidae: Coleoptera)

Inheritance of resistance to phosphine fumigant was investigated in three field-collected strains of rusty grain beetle, Cryptolestes ferrugineus, Susceptible (S-strain), Weakly Resistant (Weak-R) and Strongly Resistant (Strong-R). The strains were purified for susceptibility, weak resistance and strong resistance to phosphine, respectively, to ensure homozygosity of resistance genotype. Crosses were established between S-strain×Weak-R, S-strain×Strong-R and Weak-R×Strong-R, and the dose mortality responses to phosphine of these strains and their F1, F2 and F1-backcross progeny were obtained. The fumigations were undertaken at 25°C and 55% RH for 72h. Weak-R and Strong-R showed resistance factors of 6.3× and 505× compared with S-strain at the LC50. Both weak and strong resistances were expressed as incompletely recessive with degrees of dominance of -0.48 and -0.43 at the LC50, respectively. Responses of F2 and F1-backcross progeny indicated the existence of one major gene in Weak-R, and at least two major genes in Strong-R, one of which was allelic with the major factor in Weak-R. Phenotypic variance analyses also estimated that the number of independently segregating genes conferring weak resistance was 1 (nE=0.89) whereas there were two genes controlling strong resistance (nE=1.2). The second gene, unique to Strong-R, interacted synergistically with the first gene to confer a very high level of resistance (~80×). Neither of the two major resistance genes was sex linked. Despite the similarity of the genetics of resistance to that previously observed in other pest species, a significant proportion (~15 to 30%) of F1 individuals survived at phosphine concentrations higher than predicted. Thus it is likely that additional dominant heritable factors, present in some individuals in the population, also influenced the resistance phenotype. Our results will help in understanding the process of selection for phosphine resistance in the field which will inform resistance management strategies. In addition, this information will provide a basis for the identification of the resistance genes.

Phosphine gas generated from an aluminium phosphide tablet exhibits early knock down effects on tamarind pod borer

The tamarind pod borer, Sitophilus linearis (Herbst), is highly susceptible to phosphine fumigation compared to its congener, Sitophilus oryzae.

Susceptibility to sulfuryl fluoride and lack of cross-resistance to phosphine in developmental stages of the red flour beetle, Tribolium castaneum (Coleoptera: Tenebrionidae)

BACKGROUND

Our aim was to ascertain the potential of sulfuryl fluoride (SF) as an alternative fumigant to manage phosphine-resistant pests. We tested the susceptibility of all life stages of red flour beetle, Tribolium castaneum (Herbst), to SF and assessed the presence of cross-resistance to this fumigant in phosphine-resistant strains of this species.

RESULTS

Analysis of dose-response data indicated that the egg was the stage most tolerant to SF under a 48 h exposure period. At LC50 , eggs were 29 times more tolerant than other immature stages and adults, and required a relatively high concentration of 48.2 mg L(-1) for complete mortality. No significant differences in tolerance to SF were observed among the three larval instars, pupae and adults, and all of these stages were controlled at a low concentration of 1.32 mg L(-1) . Phosphine-resistant strains did not show cross-resistance to SF.

CONCLUSION

Our research concluded that the current maximum registered rate of SF, 1500 gh m(-3) , is adequate to control all the post-embryonic life stages of T. castaneum over a 48 h fumigation period, but it will fail to achieve complete mortality of eggs, indicating the risk of some survival of eggs under this short exposure period. As there is no cross-resistance to SF in phosphine-resistant insects, it will play a key role in managing phosphine resistance in stored-grain insect pests.

Phosphine resistance in India is characterised by a dihydrolipoamide dehydrogenase variant that is otherwise unobserved in eukaryotes

Phosphine (PH3) fumigation is the primary method worldwide for controlling insect pests of stored commodities. Over-reliance on phosphine, however, has led to the emergence of strong resistance. Detailed genetic studies previously identified two loci, rph1 and rph2, that interact synergistically to create a strong resistance phenotype. We compared the genetics of phosphine resistance in strains of Rhyzopertha dominica and Tribolium castaneum from India and Australia, countries having similar pest species but widely differing in pest management practices. Sequencing analysis of the rph2 locus, dihydrolipoamide dehydrogenase (dld), identified two structurally equivalent variants, Proline49>Serine (P49S) in one R. dominica strain and P45S in three strains of T. castaneum from India. These variants of the DLD protein likely affect FAD cofactor interaction with the enzyme. A survey of insects from storage facilities across southern India revealed that the P45/49S variant is distributed throughout the region at very high frequencies, in up to 94% of R. dominica and 97% of T. castaneum in the state of Tamil Nadu. The abundance of the P45/49S variant in insect populations contrasted sharply with the evolutionary record in which the variant was absent from eukaryotic DLD sequences. This suggests that the variant is unlikely to provide a strong selective advantage in the absence of phosphine fumigation.

Developing effective fumigation protocols to manage strongly phosphine-resistant Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae)

BACKGROUND

The emergence of high levels of resistance in Cryptolestes ferrugineus (Stephens) in recent years threatens the sustainability of phosphine, a key fumigant used worldwide to disinfest stored grain. We aimed at developing robust fumigation protocols that could be used in a range of practical situations to control this resistant pest.

RESULTS

Values of the lethal time to kill 99.9% (LT99 .9 , in days) of mixed-age populations, containing all life stages, of a susceptible and a strongly resistant C. ferrugineus population were established at three phosphine concentrations (1.0, 1.5 and 2.0 mg L(-1) ) and three temperatures (25, 30 and 35 °C). Multiple linear regression analysis revealed that phosphine concentration and temperature both contributed significantly to the LT99 .9 of a population (P < 0.003, R2 = 0.92), with concentration being the dominant variable, accounting for 75.9% of the variation. Across all concentrations, LT99.9 of the strongly resistant C. ferrugineus population was longest at the lowest temperature and shortest at the highest temperature. For example, 1.0 mg L(-1) of phosphine is required for 20, 15 and 15 days, 1.5 mg L(-1) for 12, 11 and 9 days and 2.0 mg L(-1) for 10, 7 and 6 days at 25, 30 and 35 °C, respectively, to achieve 99.9% mortality of the strongly resistant C. ferrugineus population. We also observed that phosphine concentration is inversely proportional to fumigation period in regard to the population extinction of this pest.

CONCLUSION

The fumigation protocols developed in this study will be used in recommending changes to the currently registered rates of phosphine in Australia towards management of strongly resistant C. ferrugineus populations, and can be repeated in any country where this type of resistance appears.

Inheritance and characterization of strong resistance to phosphine in Sitophilus oryzae (L.)

Sitophilus oryzae (Linnaeus) is a major pest of stored grain across Southeast Asia and is of increasing concern in other regions due to the advent of strong resistance to phosphine, the fumigant used to protect stored grain from pest insects. We investigated the inheritance of genes controlling resistance to phosphine in a strongly resistant S. oryzae strain (NNSO7525) collected in Australia and find that the trait is autosomally inherited and incompletely recessive with a degree of dominance of -0.66. The strongly resistant strain has an LC50 52 times greater than a susceptible reference strain (LS2) and 9 times greater than a weakly resistant strain (QSO335). Analysis of F2 and backcross progeny indicates that two or more genes are responsible for strong resistance, and that one of these genes, designated So_rph1, not only contributes to strong resistance, but is also responsible for the weak resistance phenotype of strain QSO335. These results demonstrate that the genetic mechanism of phosphine resistance in S. oryzae is similar to that of other stored product insect pests. A unique observation is that a subset of the progeny of an F1 backcross generation are more strongly resistant to phosphine than the parental strongly resistant strain, which may be caused by multiple alleles of one of the resistance genes.

Rapid genome wide mapping of phosphine resistance loci by a simple regional averaging analysis in the red flour beetle, Tribolium castaneum

Background

Next-generation sequencing technology is an important tool for the rapid, genome-wide identification of genetic variations. However, it is difficult to resolve the ‘signal’ of variations of interest and the ‘noise’ of stochastic sequencing and bioinformatic errors in the large datasets that are generated. We report a simple approach to identify regional linkage to a trait that requires only two pools of DNA to be sequenced from progeny of a defined genetic cross (i.e. bulk segregant analysis) at low coverage (<10×) and without parentage assignment of individual SNPs. The analysis relies on regional averaging of pooled SNP frequencies to rapidly scan polymorphisms across the genome for differential regional homozygosity, which is then displayed graphically.

Results

Progeny from defined genetic crosses of Tribolium castaneum (F₄ and F₁₉) segregating for the phosphine resistance trait were exposed to phosphine to select for the resistance trait while the remainders were left unexposed. Next generation sequencing was then carried out on the genomic DNA from each pool of selected and unselected insects from each generation. The reads were mapped against the annotated T. castaneum genome from NCBI (v3.0) and analysed for SNP variations. Since it is difficult to accurately call individual SNP frequencies when the depth of sequence coverage is low, variant frequencies were averaged across larger regions. Results from regional SNP frequency averaging identified two loci, tc_rph1 on chromosome 8 and tc_rph2 on chromosome 9, which together are responsible for high level resistance. Identification of the two loci was possible with only 5-7× average coverage of the genome per dataset. These loci were subsequently confirmed by direct SNP marker analysis and fine-scale mapping. Individually, homozygosity of tc_rph1 or tc_rph2 results in only weak resistance to phosphine (estimated at up to 1.5-2.5× and 3-5× respectively), whereas in combination they interact synergistically to provide a high-level resistance >200×. The tc_rph2 resistance allele resulted in a significant fitness cost relative to the wild type allele in unselected beetles over eighteen generations.

Conclusion

We have validated the technique of linkage mapping by low-coverage sequencing of progeny from a simple genetic cross. The approach relied on regional averaging of SNP frequencies and was used to successfully identify candidate gene loci for phosphine resistance in T. castaneum. This is a relatively simple and rapid approach to identifying genomic regions associated with traits in defined genetic crosses that does not require any specialised statistical analysis.

Dosage consistency is the key factor in avoiding evolution of resistance to phosphine and population increase in stored-grain pests

BACKGROUND

Control of pests in stored grain and the evolution of resistance to pesticides are serious problems worldwide. A stochastic individual-based two-locus model was used to investigate the impact of two important issues, the consistency of pesticide dosage through the storage facility and the immigration rate of the adult pest, on overall population control and avoidance of evolution of resistance to the fumigant phosphine in an important pest of stored grain, the lesser grain borer.

RESULTS

A very consistent dosage maintained good control for all immigration rates, while an inconsistent dosage failed to maintain control in all cases. At intermediate dosage consistency, immigration rate became a critical factor in whether control was maintained or resistance emerged.

CONCLUSION

Achieving a consistent fumigant dosage is a key factor in avoiding evolution of resistance to phosphine and maintaining control of populations of stored-grain pests; when the dosage achieved is very inconsistent, there is likely to be a problem regardless of immigration rate.

Strong resistance to phosphine in the rusty grain beetle, Cryptolestes ferrugineus (Stephens) (Coleoptera: Laemophloeidae): its characterisation, a rapid assay for diagnosis and its distribution in Australia

BACKGROUND

The recent development of very high resistance to phosphine in rusty grain beetle, Cryptolestes ferrugineus (Stephens), seriously threatens stored-grain biosecurity. The aim was to characterise this resistance, to develop a rapid bioassay for its diagnosis to support pest management and to document the distribution of resistance in Australia in 2007-2011.

RESULTS

Bioassays of purified laboratory reference strains and field-collected samples revealed three phenotypes: susceptible, weakly resistant and strongly resistant. With resistance factors of > 1000 × , resistance to phosphine expressed by the strong resistance phenotype was higher than reported for any stored-product insect species. The new time-to-knockdown assay rapidly and accurately diagnosed each resistance phenotype within 6 h. Although less frequent in western Australia, weak resistance was detected throughout all grain production regions. Strong resistance occurred predominantly in central storages in eastern Australia.

CONCLUSION

Resistance to phosphine in the rusty grain beetle is expressed through two identifiable phenotypes: weak and strong. Strong resistance requires urgent changes to current fumigation dosages. The development of a rapid assay for diagnosis of resistance enables the provision of same-day advice to expedite resistance management decisions.

Phosphine resistance in the rust red flour beetle, Tribolium castaneum (Coleoptera: Tenebrionidae): inheritance, gene interactions and fitness costs

The recent emergence of heritable high level resistance to phosphine in stored grain pests is a serious concern among major grain growing countries around the world. Here we describe the genetics of phosphine resistance in the rust red flour beetle Tribolium castaneum (Herbst), a pest of stored grain as well as a genetic model organism. We investigated three field collected strains of T. castaneum viz., susceptible (QTC4), weakly resistant (QTC1012) and strongly resistant (QTC931) to phosphine. The dose-mortality responses of their test- and inter-cross progeny revealed that most resistance was conferred by a single major resistance gene in the weakly (3.2×) resistant strain. This gene was also found in the strongly resistant (431×) strain, together with a second major resistance gene and additional minor factors. The second major gene by itself confers only 12-20× resistance, suggesting that a strong synergistic epistatic interaction between the genes is responsible for the high level of resistance (431×) observed in the strongly resistant strain. Phosphine resistance is not sex linked and is inherited as an incompletely recessive, autosomal trait. The analysis of the phenotypic fitness response of a population derived from a single pair inter-strain cross between the susceptible and strongly resistant strains indicated the changes in the level of response in the strong resistance phenotype; however this effect was not consistent and apparently masked by the genetic background of the weakly resistant strain. The results from this work will inform phosphine resistance management strategies and provide a basis for the identification of the resistance genes.

Field evaluation of vaporised ethyl formate and carbon dioxide for fumigation of stored wheat

BACKGROUND

Vapormate is a cylinderised non-flammable mixture of ethyl formate (16.7% by weight) and carbon dioxide (CO(2)) that has been developed as a rapid fumigant of stored grain. Four field trials were undertaken on wheat in 50 t farm silos to demonstrate the feasibility of dynamic application. To assess treatment efficacy, each trial tested mixed stages of Rhyzopertha dominica F. (>11,000), Tribolium castaneum (Herbst.) (>1500) and Sitophilus oryzae (L.) (>13,000) in mesh cages positioned through the centre of the grain bulk and on the grain surface. Ethyl formate and CO(2) concentrations were measured in the silo during fumigation and in ambient air outside the 6 m fumigation zone. Application rates of 420, 660 and 940 g m(-3) of ethyl formate/CO(2) formulation and exposure times of 24, 3 and 72 h, respectively, were examined using wheat of 10.4-11.7% moisture content and grain temperatures between 2 and 32 degrees C.

RESULTS

All life stages of R. dominica and T. castaneum were fully controlled under all conditions tested, and mortality of all life stages of S. oryzae was greater than 98%.

CONCLUSION

Dynamic application of vaporised ethyl formate and CO(2) to 50 t silos proved safe to operators and rapidly effective against stored-grain insects on cold to warm grain.

Changes in phosphine sorption in wheat after storage at two temperatures

BACKGROUND

Wheat can be stored for many months before being fumigated with phosphine to kill insects, so a study was undertaken to investigate whether the sorptive capacity of wheat changes as it ages. Wheat was stored at 15 or 25 degrees C and 55% RH for up to 5.5 months, and samples were fumigated at intervals to determine sorption. Sealed glass flasks (95% full) were injected with 1.5 mg L(-1) of phosphine based on flask volume. Concentrations were monitored for 11 days beginning 2 h after injection. Some wheat samples were refumigated after a period of ventilation. Several fumigations of wheat were conducted to determine the pattern of sorption during the first 24 h.

RESULTS

Phosphine concentration declined exponentially with time from 2 h after injection. Rate of sorption decreased with time spent in storage at either 15 or 25 degrees C and 55% RH. Rate of sorption tended to be lower when wheat was refumigated, but this could be explained by time in storage rather than by refumigation per se. The data from the 24 h fumigations did not fit a simple exponential decay equation. Instead, there was a rapid decline in the first hour, with phosphine concentration falling much more slowly thereafter.

CONCLUSIONS

The results have implications for phosphine fumigation of insects in stored wheat. Both the time wheat has spent in storage and the temperature at which it has been stored are factors that must be considered when trying to understand the impact of sorption on phosphine concentrations in commercial fumigations.

Influence of concentration, temperature and humidity on the toxicity of phosphine to the strongly phosphine-resistant psocid Liposcelis bostrychophila Badonnel (Psocoptera: Liposcelididae)

BACKGROUND

The psocid Liposcelis bostrychophila Badonnel, is a widespread, significant pest of stored commodities, has developed strong resistance to phosphine, the major grain disinfestant. The aim was to develop effective fumigation protocols to control this resistant pest.

RESULTS

Time to population extinction of all life stages (TPE) in days was evaluated at a series of phosphine concentrations and temperatures at two relative humidities. Regression analysis showed that temperature, concentration and relative humidity all contributed significantly to describing TPE (P<0.001, R(2)=0.95), with temperature being the dominant variable, accounting for 74.4% of the variation. Irrespective of phosphine concentration, TPE was longer at lower temperatures and high humidity (70% RH) and shorter at higher temperatures and low humidity (55% RH). At any concentration of phosphine, a combination of higher temperature and lower humidity provides the shortest fumigation period to control resistant L. bostrychophila. For example, 19 and 11 days of fumigation are required at 15 degrees C and 70% RH at 0.1 and 1.0 mg L(-1) of phosphine respectively, whereas only 4 and 2 days are required at 35 degrees C and 55% RH for the same respective concentrations.

CONCLUSIONS

The developed fumigation protocols will provide industry with flexibility in application of phosphine.

Effect of phosphine dose on sorption in wheat

BACKGROUND

In spite of the extensive use of phosphine fumigation around the world to control insects in stored grain, and the knowledge that grain sorbs phosphine, the effect of concentration on sorption has not been quantified. A laboratory study was undertaken, therefore, to investigate the effect of phosphine dose on sorption in wheat. Wheat was added to glass flasks to achieve filling ratios of 0.25-0.95, and the flasks were sealed and injected with phosphine at 0.1-1.5 mg L(-1) based on flask volume. Phosphine concentration was monitored for 8 days at 25 degrees C and 55% RH.

RESULTS

When sorption occurred, phosphine concentration declined with time and was approximately first order, i.e. the data fitted an exponential decay equation. Percentage sorption per day was directly proportional to filling ratio, and was negatively correlated with dose for any given filling ratio. Based on the results, a tenfold increase in dose would result in a halving of the sorption constant and the percentage daily loss. Wheat was less sorptive if it was fumigated for a second time.

CONCLUSIONS

The results have implications for the use of phosphine for control of insects in stored wheat. This study shows that dose is a factor that must be considered when trying to understand the impact of sorption on phosphine concentration, and that there appears to be a limit to the capacity of wheat to sorb phosphine.