Preconcentration of Uranium(VI) from Aqueous Solution by Amidoxime‐Functionalized Microspheres Silica Material: Kinetics, Isotherm and Mechanism Study

Selective, rapid extraction of uranium from aqueous solution by porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite and differential charge calculation

Herein, a new porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite (PCAR) was designed and synthesized for the rapid and selective extraction of uranium resources from aqueous solution. This study showed that PCAR exhibited excellent adsorption toward uranium in a pH range of 5-9. The dynamic adsorption process aligned with the quasi-second-order kinetic model and corresponded to the chemical adsorption process. The maximum adsorption capacity was 561.28 mg·g-1 at pH 6 and 308 K. Mechanism analysis showed that the synergistic effect of the amidoxime group (-(NH2)C=N-OH), PO, and -NH2 on the PCAR surface improved the uranium adsorption performance. The differential charge density indicated that the amidoxime and phosphate groups provide lone-pair electrons for the adsorption of UO22+ and their synergistic effect improves the UO22+ adsorption performance of PCAR. The uranium distribution coefficients of PCAR and CAR are 4.6 and 2.4 times those of vanadium, respectively. These results indicate that phosphorylation can ameliorate the disadvantage of competitive vanadium adsorption of the amidoxime adsorbent. In addition, PCAR exhibits good reusability and stable adsorption capacity after five adsorption-desorption cycles. Hence, PCAR has excellent potential for uranium extraction from aqueous solution.

A highly sensitive method for uranium quantification in water samples at ultra-trace level by total reflection X-ray fluorescence, after its direct pre-concentration on the surface of amidoxime functionalized quartz sample supports

In this work we have developed a Total reflection X-Ray Fluorescence (TXRF) based methodology for the determination of uranium in natural water samples at ultra-trace concentration level. The methodology involves functionalization of quartz sample supports used for TXRF measurements with (3-Amidoxy) triethoxysilane, which has very high uranium uptake efficiency. (3-Amidoxy) triethoxysilane has been synthesized from (3-Cyanopropyl) triethoxysilane (CPTS). This amidoxime functionalized sample supports, simply needed to be dipped in the uranium solution for 3 h after which, it can be directly taken for TXRF measurements. The developed methodology is very fast, simple with less sample preparation steps involved. The present work utilizes Rayleigh scattered peak to construct the calibration curve for the quantification purpose. The developed methodology has improved accuracy as well as precision for the quantification of uranium at such low concentrations level. The detection limit and accuracy obtained are 0.013 ng/mL (13 ppt) and 1.9%, respectively which are the lowest using any X-Ray Fluorescence based method, to the best of our knowledge. The method was successfully applied for the U determination in natural water samples like ground water, river water and sea water.

Adsorption performance of Enterobacter cloacae towards U(VI) ion and application of Enterobacter cloacae/carbon nanotubes to preconcentration and determination of low-levels of U(VI) in water samples

Keeping the high potential of some microorganisms in adsorption of radionuclides in view, the adsorption properties of Enterobacter cloacae towards uranium were attentively scrutinized, and then it was used for preconcentration of uranium in different samples, using Enterobacter cloacae/carbon nanotube composite. First, using ultrasonic agitation, the effects of operational factors on biosorption of uranium on the inactive Enterobacter cloacae were appraised and modeled by central composite design, and a comprehensive study was performed on the equilibrium, kinetics, thermodynamic, and selectivity aspects of biosorption. The optimization studies along with the evaluations of the adsorption properties revealed that Enterobacter cloacae have a high affinity for fast and selective biosorption of uranium ions, at pH 5.1. Second, the Enterobacter cloacae/carbon nanotube was synthesized, characterized, and utilized for preconcentration of uranium in different samples, using a mini-column packed with the composite. The optimization of operational factors on recovery of uranium, using the central composite design, showed that uranium can be quantitively adsorbed at a sample flow rate lower than 4.5 mL min^-1 and the desorption could be accomplished with 3.0 mL HCl 0.6 M solution. Finally, the mini-column was exploited for preconcentration and determination of uranium in different samples. The results revealed the low detection limit (0.015 μg.L^-1), high precision (RSDs ≤3.92%), and good accuracy of the proposed procedure.

U(VI) and Th(IV) recovery using silica beads functionalized with urea- or thiourea-based polymers - Application to ore leachate

Urea and thiourea have been successfully deposited at the surface of silica beads (through one-pot reaction with formaldehyde) for designing new sorbents for U(VI) and Th(IV) recovery (UR/SiO₂ and TUR/SiO₂ composites, respectively). These materials have been characterized by FTIR, titration, elemental analysis, BET, TGA, SEM-EDX for identification of structural and chemical properties, and interpretation of binding mechanisms. Based on deprotonation of reactive groups (amine, carbonyl, or thiocarbonyl) and metal speciation, the optimum pH was ~4. Uptake kinetics was fast (equilibrium within 60-90 min). Although the kinetic profiles are fitted by the pseudo-first order rate equation, the resistance to intraparticle diffusion cannot be neglected. Sorption isotherms were fitted by Langmuir equation (maximum sorption capacities: 1-1.2 mmol g^-1). Thermodynamics are also investigated showing differences between the two types of functionalized groups: exothermic for TUR/SiO₂ and endothermic for UR/SiO₂. Metal desorption is highly effective using 0.3-0.5 M HCl solutions: total desorption occurs within 30-60 min; sorption/desorption properties are remarkably stable for at least 5 cycles. The sorbents have marked preference for U(VI) and Th(IV) over alkali-earth and base metals at pH_eq ~4.8. By preliminary precipitation steps, it is possible "cleaning" ore leachates of pegmatite ore, and recovering U(VI) and Th(IV) using functionalized silica beads. After elution and selective recovery by precipitation with oxalate (Th-cake) and alkaline (U-cake), the metals can be valorized.

Quaternization of Composite Algal/PEI Beads for Enhanced Uranium Sorption-Application to Ore Acidic Leachate

The necessity to recover uranium from dilute solutions (for environmental/safety and resource management) is driving research towards developing new sorbents. This study focuses on the enhancement of U(VI) sorption properties of composite algal/Polyethylenimine beads through the quaternization of the support (by reaction with glycidyltrimethylammonium chloride). The sorbent is fully characterized by FTIR, XPS for confirming the contribution of protonated amine and quaternary ammonium groups on U(VI) binding (with possible contribution of hydroxyl and carboxyl groups, depending on the pH). The sorption properties are investigated in batch with reference to pH effect (optimum value: pH 4), uptake kinetics (equilibrium: 40 min) and sorption isotherms (maximum sorption capacity: 0.86 mmol U g-1). Metal desorption (with 0.5 M NaCl/0.5 M HCl) is highly efficient and the sorbent can be reused for five cycles with limited decrease in performance. The sorbent is successfully applied to the selective recovery of U(VI) from acidic leachate of uranium ore, after pre-treatment (cementation of copper, precipitation of rare earth elements with oxalate, and precipitation of iron). A pure yellow cake is obtained after precipitation of the eluate.

Amidoxime Functionalization of Algal/Polyethyleneimine Beads for the Sorption of Sr(II) from Aqueous Solutions

There is a need for developing new sorbents that incorporate renewable resources for the treatment of metal-containing solutions. Algal-polyethyleneimine beads (APEI) (reinforced with alginate) are functionalized by grafting amidoxime groups (AO-APEI). Physicochemical characteristics of the new material are characterized using FTIR, XPS, TGA, SEM, SEM-EDX, and BET. AO-APEI beads are tested for the recovery of Sr(II) from synthetic solutions after pH optimization (≈ pH 6). Uptake kinetics is fast (equilibrium ≈ 60-90 min). Sorption isotherm (fitted by the Langmuir equation) shows remarkable sorption capacity (≈ 189 mg Sr g-1). Sr(II) is desorbed using 0.2 M HCl/0.5 M CaCl2 solution; sorbent recycling over five cycles shows high stability in terms of sorption/desorption performances. The presence of competitor cations is studied in relation to the pH; the selectivity for Sr(II) is correlated to the softness parameter. Finally, the recovery of Sr(II) is carried out in complex solutions (seawater samples): AO-APEI is remarkably selective over highly concentrated metal cations such as Na(I), K(I), Mg(II), and Ca(II), with weaker selectivity over B(I) and As(V). AO-APEI appears to be a promising material for selective recovery of strontium from complex solutions (including seawater).