First-Row Transition Metal Based Catalysts for the Oxygen Evolution Reaction under Alkaline Conditions: Basic Principles and Recent Advances

Microkinetic Modelling of Electrochemical Oxygen Evolution Reaction on Ir(111)@N-Graphene Surface

We have explored the thermodynamics and microkinetic aspects of oxygen evolution catalysis on low loading of Ir(111) on nitrogen-doped graphene at constant potential. The electronic modification induced by N-doping is the reason for the reduced overpotential of OER. The N-induced defect in the charge density is observed with increasing charge-depleted region around the Ir atoms. The lattice contraction shifts the d-band center away from the Fermi level, which increases the barrier for OH* and O* formation on Ir(111) supported on NGr (Ir(111)@NGr). Thus, highly endothermic O* formation reduces the OOH* formation, which is the potential determining step. For comparison, all electronic and binding energy calculations were also performed against Ir NP supported on Gr (Ir(111)@Gr). The stepwise potential-dependent activation barrier (G a ${{G}_{a}}$ ) was obtained using the charge extrapolation method. The third step remains the RDS in all ranges of water oxidation potentials. The potential dependentG a ${{G}_{a}}$ is further applied to the Eyring rate equation to obtain the current density (j O E R ${{j}_{OER}}$ ) and correlation betweenj O E R ${{j}_{OER}}$ and pH dependence, i. e., OH- concentration. The microkineticj O E R ${{j}_{OER}}$ progression leads to a Tafel slope value of 30 mV dec-1 at pH=14.0, requiringη k i n e t i c = 0 . 33 V ${{\eta }_{kinetic}=0.33\ V}$ .

Atomic Layer Deposition of Nickel Oxides as Electrocatalyst for Oxygen Evolution Reaction

In this study, we present atomic layer deposition (ALD) of nickel oxides (NiOx) using a new nickel precursor, (methylcyclopentadienyl)(cyclopentadienyl)nickel (NiCp(MeCp)), and ozone (O3) as the oxygen source. The process features a relatively short saturation pulse of the precursor (NiCp(MeCp)) and a broad temperature window (150-250 °C) with a consistent growth rate of 0.39 Å per cycle. The NiOx film deposited at 250 °C primarily exhibits a polycrystalline cubic phase with minimal carbon contamination. Notably, the post-annealed ALD NiOx film demonstrates attractive electrocatalytic performance on the oxygen evolution reaction (OER) by providing a low overpotential of 320 mV at 10 mA cm-2, a low Tafel slope of 70.5 mV dec-1, and sufficient catalytic stability. These results highlight the potential of the ALD process using the NiCp(MeCp) precursor for the fabrication of high-activity catalysts.

Structural Changes of NiFe Layered Double Hydroxides During the Oxygen Evolution Reaction: A Diffraction and Total Scattering Operando Study

NiFe-layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER) in alkaline media. Here, operando X-ray diffraction (XRD) and X-ray total scattering are used with Pair Distribution Function (PDF) analysis to investigate the atomic structure of the catalytically active material and follow structural changes under operating conditions. XRD shows an interlayer contraction under applied oxidative potential, which relates to a transition from the α-LDH to the γ-LDH phase. The phase transition is reversible, and the α-LDH structure is recovered at 1.3 VRHE. However, PDF analysis shows an irreversible increase in the stacking disorder under operating conditions, along with a decrease in the LDH sheet size. The analysis thus shows that the operating conditions induce a breakdown of the particles leading to a decrease in crystallite size.

Microwave-Assisted Synthesis of Platinum-free High-Entropy Alloy Catalysts on Reduced Graphene Oxide Sheets for Enhanced Oxygen Reduction and Evolution Reactions

Nano-sized high-entropy materials (HEMs) recently received more attention to researchers due to their superior electrochemical catalytic properties. HEMs comprise at least five elements with or without metals and are synthesized through solid-state reactions and solution-mediated techniques. The presence of many elements in these HEMs result in a high mixing entropy and facilitates the formation of stable solid solutions in fundamental crystal structures. Herein, Pt-free high-entropy alloys (HEAs) were synthesized through facile and straightforward pulse microwave (PM) synthesis technique, which serve as efficient electrochemical catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The PM synthesis method was conducted at an extremely low temperature (100 °C) without any external catalytic reagents. Using this PM technique, Cr18.2Zr13.5Ti5.3Co17.8Ni8.4Cu8.5Fe28.3 and Al15.3Mn18.2Ti3.7Co23.2Ni5.9Cu5.9Fe27.8 HEAs catalysts were synthesized with superior catalytic activity towards OER and ORR and compare its activities with pure Pt catalysts. The as-prepared HEAs also display an anti-CO poisoning effect and long-term durability, as compared to pure Pt catalysts. The low-temperature PM approach not only confirms the feasibility of synthesis of noble metal-free HEAs but also validates their superior catalytic activity towards OER and ORR, which is beneficial for the development of proton exchange membrane fuel cells and proton exchange membrane water electrolysis.

Improving the Oxygen Evolution Reaction Performance of Ternary Layered Double Hydroxides by Tuning All Three Cations' Electronic Structures

The pursuit of efficient and sustainable hydrogen production is essential in the fight against climate change. One important method for achieving this is the electrolysis of water, particularly through the oxygen evolution reaction (OER). Recent studies indicate that trimetallic layered double hydroxides (LDHs) can enhance OER performance compared to bimetallic LDHs. This improvement occurs because the third cation alters the electronic structures of the other two cations, thereby increasing the intermediates' binding energies and enhancing electrical conductivity. This study proposes an approach enabling the modulation of the electronic structures of all three cations involved in the synthesis of the trimetallic LDHs. It suggested intercalating sodium dodecyl sulfate (SDS) into the interlayer of the trimetallic NiFe-La-LDH. A successful intercalation of SDS has been confirmed through the XRD, FT-IR, EDS, and XPS. This has expanded the interlayer distance which was beneficial for the electrical conductivity. Furthermore, SDS generated sulphur, which modulated the electronic structures of all three cations enriching the active sites and improving electrical conductivity and OER performance compared to its counterparts. This approach is beneficial: 1. The interlayer can be further enlarged by using different doping ratios of SDS. 2. Sulphur can enrich the active sites and improve the OER performance.

Identifying and tuning coordinated water molecules for efficient electrocatalytic water oxidation

Coordination complexes are promising candidates for powerful electrocatalytic oxygen evolution reaction but challenges remain in favoring the kinetics behaviors through local coordination regulation. Herein, by refining the synergy of carboxylate anions and multiconjugated benzimidazole ligands, we tailor a series of well-defined and stable coordination complexes with three-dimensional supramolecular/coordinated structures. The coordinated water as potential open coordination sites can directly become intermediates, while the metal center easily achieves re-coordination with water molecules in the pores to resist lattice oxygen dissolution. In situ experiments and theory simulations indicate that nickel centers with neighboring coordinated water molecules follow an intramolecular oxygen coupling mechanism with a low thermodynamic energy barrier. With more coordinated water introduced, an optimized intramolecular oxygen coupling process may appear for favoring the reaction kinetics. As such, a low overpotential of 248 mV at 10 mA cm-2 and long-term stability of 200 h are achieved. This study underscores the potential of crafting coordinated water molecules for efficient electrocatalysis applications.

Quaternary Mixed Oxides of Non-Noble Metals with Enhanced Stability during the Oxygen Evolution Reaction

Robust electrocatalysts required to drive the oxygen evolution reaction (OER) during water electrolysis are still a missing component toward the path for sustainable hydrogen production. Here a new family of OER active quaternary mixed-oxides based on X-Sn-Mo-Sb (X = Mn, Fe, Co, or Ni) is reported. These nonstoichiometric mixed oxides form a rutile-type crystal structure with a random atomic motif and diverse oxidation states, leading to the formation of cation vacancies and local disorder. The successful incorporation of all cations into a rutile structure was achieved using oxidizing agents that facilitates the formation of Sb5+ required to form the characteristic octahedral coordination in rutile. The mixed oxides exhibit enhanced stability in both acidic and alkaline environments under anodic potentials with no changes in their crystal structure after extensive electrochemical stress. The improved stability of these mixed oxides highlights their potential application as scaffolds to host and stabilize OER active metals.

Recent Progress in Non-Noble Metal Catalysts for Oxygen Evolution Reaction: A Focus on Transition and Rare-Earth Elements

The demand for renewable energy sources has become more urgent due to climate change and environmental pollution. The oxygen evolution reaction (OER) plays a crucial role in green energy sources. This article primarily explores the potential of using non-noble metals, such as transition and rare earth metals, to enhance the efficiency of the OER process. Due to their cost-effectiveness and unique electronic structure, these non-noble metals could be a game-changer in the field. 'Doping,' which is the process of adding a small amount of impurity to a material to alter its properties, and 'synergistic effects,' which refer to the combined effect of two or more elements that is greater than the sum of their individual effects, are two key concepts in this field. Transition and rare earth metals can reduce the overpotential, a measure of the excess potential required to drive a reaction, thus enhancing the OER process by engineering the electronic and surface molecular structure. This article summarizes the roles of various non-noble metals in the OER process and highlights opportunities for researchers to propose innovative ways to optimize the OER process.

Modulation of morphology and electronic structure of cobalt thiophenedicarboxylic coordination polymer via ligand exchange for high-performance oxygen evolution reaction and supercapacitor

Rationally designing metal organic frameworks (MOFs) as an ideal dual-function material for water electrolysis and supercapacitors is of great significance for energy storage and conversion. Herein, we successfully synthesized the nanoneedle-like structure CoNi-MOF by partially replacing 2, 5-thiophenedicarboxylic acid (TDA) with 1, 1'-Ferrocenedicarboxylate (Fc). The exchange of Fc ligand can modulate the morphology and electronic structure of CoNi-TDA, thus exposing the abundant active sites and improving the electrical conductivity. The as-prepared CoNi-TDA/0.2Fc exhibited a low overpotential of 236 mV at 10 mA cm-2 for oxygen evolution reaction (OER) and a low Tafel slope of 40.44 mV dec-1. Additionally, CoNi-TDA/0.2Fc demonstrated a notable specific capacitance of 1409 F g-1 at 1 A/g and excellent stability, maintaining a capacitance retention of 96.54 % after 20,000 cycles. The study proposes a new strategy to modulate the morphology and electronic structure of MOFs via the ligand exchange for high-performance energy storage and conversion device.

Quasi-1D Oxides as Electrocatalysts for Water-Splitting: Case Study of Sr9M2Mn5O21 (M = Co, Ni, Cu, Zn)

We have demonstrated that multimetal oxides with a quasi-1D structure can be effective electrocatalysts for water electrolysis. Four materials have been systematically investigated, namely, Sr9Co2Mn5O21, Sr9Ni2Mn5O21, Sr9Cu2Mn5O21, and Sr9Zn2Mn5O21, comprising 1D chains of face-sharing MnO6 octahedra and MO6 trigonal prisms (M = Co, Ni, Cu or Zn), which are held together by strontium ions located between the chains. These materials show a consistent trend in electrocatalytic properties for both half-reactions of water-splitting, i.e., oxygen evolution and hydrogen evolution reactions (OER and HER). In particular, Sr9Ni2Mn5O21 has an outstanding performance for OER, with an overpotential of 0.37 V, which is lower than those of many 3D and 2D oxides, and rivals the activity of noble metal catalysts, such as RuO2. This is important given that the OER is considered the bottleneck of the water-slitting process. Chronopotentiometry studies, combined with X-ray photoelectron spectroscopy (XPS) and X-ray diffraction experiments pre- and post-reaction, indicate that Sr9Ni2Mn5O21 is highly stable and retains its structural integrity upon electrocatalytic reactions. This study highlights the potential of quasi-1D oxides as active electrocatalysts for water-splitting.

Utilization of Cobalt and its Oxide/Hydroxide Mediated by Ionic Liquids/Deep Eutectic Solvents as Catalysts in Water Splitting

With the ever-growing global demand for sustainable energy solutions, hydrogen has garnered significant attention as a clean, efficient, and renewable energy source. In the field of hydrogen production, catalyst research stands out as one of the foremost areas of focus. In recent years, the preparation of electrocatalysts using ionic liquids (ILs) and deep eutectic solvents (DESs) has attracted widespread attention. ILs and DESs possess unique physicochemical properties and are recognized as green media as well as functional materials. Cobalt-based catalysts have proven to be efficient electrocatalysts for water splitting. Incorporating ILs or DESs into the preparation of cobalt-based catalysts offers a remarkable advantage by allowing precise control over their structural design and composition. This control directly influences the adsorption properties of the catalyst's surface and the stability of reaction intermediates, thereby enabling enhanced control over reaction pathways and product selectivity. Consequently, the catalytic activity and stability of cobalt-based catalysts can be effectively improved. In the process of preparing cobalt-based catalysts, ILs and DESs can serve as solvents and templates. Owing to the good solubility of ILs and DESs, they can efficiently dissolve raw materials and provide a special nucleation and growth environment, obtaining catalysts with novel-structures. The main focus of this review is to provide a detailed introduction to metal cobalt and its oxide/hydroxide derivatives in the field of water splitting, with a particular emphasis on the research progress achieved through the utilization of IL and DES. The aim is to assist readers in designing and synthesizing novel and high-performance electrochemical catalysts.

Unlocking the Electrocatalytic Behavior of Cu2MnS2 Nanoflake-Anchored rGO for the Oxygen Evolution Reaction in an Alkaline Medium

A catalyst of the oxygen evolution reaction (OER) that is viable, affordable, and active for effective water-splitting applications is critical. A variety of electrocatalysts have been discovered to replace noble metal-based catalysts. Of these, transition metal-based sulfides are essential for incorporating carbonaceous materials to improve electrical conductivity, resulting in better electrocatalytic performance. Our study illustrates the synthesis of Cu2MnS2 (CMS) nanoflakes and their different rGO composites (10 to 40 wt %) via a hydrothermal technique for an effective water oxidation reaction. The X-ray diffraction pattern reveals that the prepared Cu2MnS2 nanoflakes exhibit a cubic crystal structure. The high-resolution scanning electron microscopy and the high resolution transmission electron microscopy images corroborate the formation of the nanoflake-like morphology of Cu2MnS2 with the strong interaction of rGO. The selected area electron diffraction analysis pattern reveals a polycrystalline nature. The Fourier transform infrared spectrum shows the existence of a metal sulfur vibrational band at 590 cm-1, and Raman analysis infers the presence of rGO. The X-ray photoelectron spectroscopy spectra reveal the oxidation states of the elements present in the samples. Using Brunauer-Emmett-Teller analysis, the surface area of CMS-20 is found to be 117.04 m2/g. The measured OER overpotentials using linear sweep volammetry and the values are 380, 370, 340, 376, and 400 mV at 10 mA/cm2 for CMS, CMS-10, CMS-20, CMS-30, and CMS-40, respectively, and the corresponding Tafel slope values are 179, 158, 149, 206, and 240 mV/decade, respectively. The electrochemical active surface area is estimated using cyclic voltammetry for all of the catalysts, where CMS-20 showed a larger surface area. Also, the same catalyst exhibits good stability for ∼24 h at a constant potential, which is confirmed via chronoamperometry. Thus, combining transition metal-based sulfides with carbonaceous materials indicates improved catalytic behavior for the preparation of high-performance OER electrocatalysts. Overall, the prepared CMS-20 performed as an efficient OER electrocatalyst and can be utilized for practical applications in energy conversion.

Gonçalves J, Breslin CB, Nossol E. Enhancing Oxygen Evolution Reaction Performance with rGO/CoNi-Prussian Blue-Derived Oxyhydroxide Nanocomposite Electrocatalyst: A Strategic Synthetic Approach

Electrochemical water splitting is a promising approach in the development of renewable energy technologies, providing an alternative to fossil fuels. It has attracted considerable attention in recent years. The benchmark materials used in water splitting are precious metals that are expensive and scarce. Therefore, this work proposes a strategic electrochemical synthesis of a reduced graphene oxide and cobalt-nickel hexacyanoferrate (rGO/CoNiHCF)-derived composite (rGO/CoNiPBd-OOH) to achieve optimized OER performance. The optimum rGO/CoNiHCF was fabricated with the Co:Ni precursors in a 3:1 ratio with a ferricyanide solution of pH = 1.0. Using an alkaline electrochemical treatment, the well-distributed globular particles of CoNiHCF over rGO sheets were converted into layered frameworks of metallic (oxy)hydroxide species, giving the final rGO/CoNiPBd-OOH nanocomposite. This nanocomposite presented favorable kinetic activity resulting in a Tafel slope of 33 mV dec-1, while rGO, CoNiPBd-OOH, and RuO2 exhibited slopes of 80, 47, and 51 mV dec-1, respectively. Although the benchmark RuO2 electrocatalyst showed a lower overpotential (240 mV dec-1) at a current density of 10 mA cm-2, the rGO/CoNiPBd-OOH performed well with an overpotential of 346 mV, combined with superior stability compared to CoNiPBd-OOH and RuO2, maintaining a current density of 10 mA cm-2 for 15 h with an overpotential loss of 6.92%. This work successfully presents an "all-electrochemical" synthesis of a rGO/CoNiHCF-derived material with remarkable electrocatalytic activity for OER assisted by a strategic preparation methodology, which helped to understand the influence of synthetic parameters and choose their conditions to achieve the optimum OER performance.

Effect of solvothermal synthesis parameters on the crystallite size and atomic structure of cobalt iron oxide nanoparticles

We here investigate how the synthesis method affects the crystallite size and atomic structure of cobalt iron oxide nanoparticles. By using a simple solvothermal method, we first synthesized cobalt ferrite nanoparticles of ca. 2 and 7 nm, characterized by Transmission Electron Microscopy (TEM), Small Angle X-ray scattering (SAXS), X-ray and neutron total scattering. The smallest particle size corresponds to only a few spinel unit cells. Nevertheless, Pair Distribution Function (PDF) analysis of X-ray and neutron total scattering data shows that the atomic structure, even in the smallest nanoparticles, is well described by the spinel structure, although with significant disorder and a contraction of the unit cell parameter. These effects can be explained by the surface oxidation of the small nanoparticles, which is confirmed by X-ray near edge absorption spectroscopy (XANES). Neutron total scattering data and PDF analysis reveal a higher degree of inversion in the spinel structure of the smallest nanoparticles. Neutron total scattering data also allow magnetic PDF (mPDF) analysis, which shows that the ferrimagnetic domains correspond to ca. 80% of the crystallite size in the larger particles. A similar but less well-defined magnetic ordering was observed for the smallest nanoparticles. Finally, we used a co-precipitation synthesis method at room temperature to synthesize ferrite nanoparticles similar in size to the smallest crystallites synthesized by the solvothermal method. Structural analysis with PDF demonstrates that the ferrite nanoparticles synthesized via this method exhibit a significantly more defective structure compared to those synthesized via a solvothermal method.

Sr-induced Fermi Engineering of β-FeOOH for Multifunctional Catalysis

Designing a multifunctional electrocatalyst to produce H2 from water, urea, urine, and wastewater, is highly desirable yet challenging because it demands precise Fermi-engineering to realize stronger π-donation from O 2p to electron(e-)-deficient metal (t2g) d-orbitals. Here a Sr-induced phase transformed β-FeOOH/α-Ni(OH)2 catalyst anchored on Ni-foam (designated as pt-NFS) is introduced, where Sr produces plenteous Fe4+ (Fe3+ → Fe4+) to modulate Fermi level and e--transfer from e--rich Ni3+(t2g)-orbitals to e--deficient Fe4+(t2g)-orbitals, via strong π-donation from the π-symmetry lone-pair of O bridge. pt-NFS utilizes Fe-sites near the Sr-atom to break the H─O─H bonds and weakens the adsorption of *O while strengthening that of *OOH, toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Invaluably, Fe-sites of pt-NFS activate H2-production from urea oxidation reaction (UOR) through a one-stage pathway which, unlike conventional two-stage pathways with two NH3-molecules, involves only one NH3-molecule. Owing to more suitable kinetic energetics, pt-NFS requires 133 mV (negative potential shift), 193 mV, ≈1.352 V, and ≈1.375 V versus RHE for HER, OER, UOR, and human urine oxidation, respectively, to reach the benchmark 10 mA cm-2 and also demonstrates remarkable durability of over 25 h. This work opens a new corridor to design multifunctional electrocatalysts with precise Fermi engineering through d-band modulation.

Tuning the Locally Enhanced Electric Field Treatment (LEEFT) between Electrophysical and Electrochemical Mechanisms for Bacteria Inactivation

Efficient drinking water disinfection methods are critical for public health. Locally enhanced electric field treatment (LEEFT) is an antimicrobial method that uses sharp structures, like metallic nanowires, to enhance the electric field at tips and cause bacteria inactivation. Electroporation is the originally designed mechanism of LEEFT. Although oxidation is typically undesired due to byproduct generation and electrode corrosion, it can enhance the overall disinfection efficiency. In this work, we conduct an operando investigation of LEEFT, in which we change the electrical parameters to tune the mechanisms between electrophysical electroporation and electrochemical oxidation. Pure electroporation (i.e., without detectable oxidation) could be achieved under a duty cycle of ≤0.1% and a pulse width of ≤2 μs. Applying 2 μs pulses at 7-8 kV/cm and 0.1% duty cycle results in 80-100% bacteria inactivation with pure electroporation. A higher chance of oxidation is found with a higher duty cycle and a longer pulse width, where the antimicrobial efficiency could also be enhanced. For water with a higher conductivity, a higher antimicrobial efficiency can be achieved under the same treatment conditions, and electrochemical reactions could be induced more easily. The findings shown in this work improve the fundamental understanding of LEEFT and help optimize the performance of LEEFT in real applications.

ZIF-67-derived Co-N-C supported nickel cobalt sulfide as a bifunctional electrocatalyst for sustainable hydrogen production via alkaline electrolysis

As non-renewable resources are finite and cannot be utilized indefinitely, hydrogen (H2) has emerged as a promising alternative for clean and sustainable energy. The cost-effective hydrogen production to meet large-scale commercial demand poses a significant challenge. Water electrolysis, powered by electricity derived from renewable resources, stands out as a viable route towards sustainable hydrogen production, with electrocatalysis playing a pivotal role in this process. Notably, materials derived from metal-organic frameworks (MOFs) exhibit excellent physicochemical properties, making them promising candidates for electrocatalysis. In this study, we synthesized zeolitic imidazolate framework-67 (ZIF-67) and its derived Co-N-doped carbon (Co-N-C) supported NiCo2S4 on nickel foam (NF), namely NF@ZIF-67@NiCo2S4 and NF@Co-N-C@NiCo2S4, using a hydrothermal method. The electrocatalytic activity of these synthesized materials for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) was systematically evaluated using various electrochemical techniques. The NF@ZIF-67@NiCo2S4 material demonstrates overpotentials of 248 and 359 mV for OER and HER at the current density of 50 mA cm-2, whereas, NF@Co-N-C@NiCo2S4 exhibits overpotentials of 239 and 351 mV, respectively. Furthermore, the catalysts exhibit excellent stability in both OER and HER even under high applied potentials. Moreover, to assess their catalytic performance in a full-cell configuration, two alkaline electrolyzer cells were assembled: NF@ZIF-67@NiCo2S4(+)∥NF@ZIF-67@NiCo2S4(-) and NF@Co-N-C@NiCo2S4(+)∥NF@Co-N-C@NiCo2S4(-). These two electrolyzers demonstrated cell potentials of 1.62 V and 1.59 V at 10 mA cm-2, respectively, showcasing their efficacy in overall water-splitting.

Strain-Triggered Distinct Oxygen Evolution Reaction Pathway in Two-Dimensional Metastable Phase IrO2 via CeO2 Loading

A strain engineering strategy is crucial for designing a high-performance catalyst. However, how to control the strain in metastable phase two-dimensional (2D) materials is technically challenging due to their nanoscale sizes. Here, we report that cerium dioxide (CeO2) is an ideal loading material for tuning the in-plane strain in 2D metastable 1T-phase IrO2 (1T-IrO2) via an in situ growth method. Surprisingly, 5% CeO2 loaded 1T-IrO2 with 8% compressive strain achieves an overpotential of 194 mV at 10 mA cm-2 in a three-electrode system. It also retained a high current density of 900 mA cm-2 at a cell voltage of 1.8 V for a 400 h stability test in the proton-exchange membrane device. More importantly, the Fourier transform infrared measurements and density functional theory calculation reveal that the CeO2 induced strained 1T-IrO2 directly undergo the *O-*O radical coupling mechanism for O2 generation, totally different from the traditional adsorbate evolution mechanism in pure 1T-IrO2. These findings illustrate the important role of strain engineering in paving up an optimal catalytic pathway in order to achieve robust electrochemical performance.

Amorphous multimetal based catalyst for oxygen evolution reaction

The development of efficient, low-cost water splitting electrocatalysts is needed to store energy by generating sustainable hydrogen from low power clean but intermittent energy sources such as solar and wind. Here, we report a highly sustained low overpotential for oxygen evolution reached by the unique combination of three metals (NiCoV) prepared from a simple low temperature auto-combustion process. The amorphous multimetal oxygen evolving catalyst could be stably coated on a stainless-steel support using a tribochemical particle blasting method to create an oxygen evolution reaction (OER) electrode with a low overpotential of 230 mV at 10 mA cm-2 and a low Tafel slope of 40 mV dec-1. In addition to their low overpotential, this oxygen evolving electrocatalyst preserved performance demonstrating a stability after 10 h at the technologically relevant current density and without any surface morphology alteration. Given the importance of sustainable hydrogen production, the development of this new OER catalyst points the way to removing a key technical bottleneck for the water splitting reaction and could offer a route to cost reduction and lowering hurdles to more widespread adaptation of electrolyser technologies for hydrogen production.

Supplementary Information

The online version contains supplementary material available at 10.1007/s43939-024-00087-5.

In situ assembly of Ni3S2 nanosheets encapsulated with NiFe(oxy)hydroxides for efficient water oxidation

Morphology control plays a pivotal role in achieving an exceptionally efficient electrocatalyst with abundant active sites and outstanding electrical conductivity. In this study, we employed a sophisticated chemical nanoengineering technique to fabricate an exquisitely thin NiFe(OH)x electrocatalyst on Ni3S2 nanosheets. Firstly, the Ni3S2 nanosheets were synthesized through an innovative in situ one-step sulfurization reaction of the Ni(OH)2 nanosheets grown on Ni foam. Subsequently, a remarkable ultrathin layer of NiFe(OH)x was precisely deposited onto the surface of the Ni3S2 to form a captivating core-shell structure using a chemical dipping method. The resulting electrode, denoted as NiFe(OH)x/Ni3S2/NF, exhibited exceptional electrocatalytic activity and durability towards the oxygen evolution reaction (OER), owing to its expansive specific surface area, rapid electron transport, and robust interlayer bonding. Notably, this electrode achieved an impressive current density of 100 mA cm-2 at an astonishingly low overpotential of 218 mV while maintaining a low Tafel slope of 37.9 mV dec-1 and remarkable stability for up to 12 days in 1 M KOH aqueous solution. This work presents an alluring novel approach for constructing highly efficient ultrathin catalysts for water splitting.

Electron-Sponge Nature of Polyoxometalates for Next-Generation Electrocatalytic Water Splitting and Nonvolatile Neuromorphic Devices

Designing next-generation molecular devices typically necessitates plentiful oxygen-bearing sites to facilitate multiple-electron transfers. However, the theoretical limits of existing materials for energy conversion and information storage devices make it inevitable to hunt for new competitors. Polyoxometalates (POMs), a unique class of metal-oxide clusters, have been investigated exponentially due to their structural diversity and tunable redox properties. POMs behave as electron-sponges owing to their intrinsic ability of reversible uptake-release of multiple electrons. In this review, numerous POM-frameworks together with desired features of a contender material and inherited properties of POMs are systematically discussed to demonstrate how and why the electron-sponge-like nature of POMs is beneficial to design next-generation water oxidation/reduction electrocatalysts, and neuromorphic nonvolatile resistance-switching random-access memory devices. The aim is to converge the attention of scientists who are working separately on electrocatalysts and memory devices, on a point that, although the application types are different, they all hunt for a material that could exhibit electron-sponge-like feature to realize boosted performances and thus, encouraging the scientists of two completely different fields to explore POMs as imperious contenders to design next-generation nanodevices. Finally, challenges and promising prospects in this research field are also highlighted.

Electrochemical Activation of Atomic-Layer-Deposited Nickel Oxide for Water Oxidation

NiO-based electrocatalysts, known for their high activity, stability, and low cost in alkaline media, are recognized as promising candidates for the oxygen evolution reaction (OER). In parallel, atomic layer deposition (ALD) is actively researched for its ability to provide precise control over the synthesis of ultrathin electrocatalytic films, including film thickness, conformality, and chemical composition. This study examines how NiO bulk and surface properties affect the electrocatalytic performance for the OER while focusing on the prolonged electrochemical activation process. Two ALD methods, namely, plasma-assisted and thermal ALD, are employed as tools to deposit NiO films. Cyclic voltammetry analysis of ∼10 nm films in 1.0 M KOH solution reveals a multistep electrochemical activation process accompanied by phase transformation and delamination of activated nanostructures. The plasma-assisted ALD NiO film exhibits three times higher current density at 1.8 V vs RHE than its thermal ALD counterpart due to enhanced β-NiOOH formation during activation, thereby improving the OER activity. Additionally, the rougher surface formed during activation enhanced the overall catalytic activity of the films. The goal is to unravel the relationship between material properties and the performance of the resulting OER, specifically focusing on how the design of the material by ALD can lead to the enhancement of its electrocatalytic performance.

Virus-Like Magnetic Heterostructure: an Outstanding Metal-Complex Active Platform Enables High-Efficiency Separation and Catalysis

Assembled heterostructure systems, as emerging functional materials, have broad applications ranging from enzyme and drug payload to catalysis and purification. However, these require trial- and -error design process and complex experimental environment to generate heterostructure materials. Here, this study describes an easy-to-execute strategy to fabricate magnetic heterostructure as multifunctional delivery system. We utilize first-row transition metal copper and nitroso/amino ligand as modules to assemble around Fe3 O4 magnetic nanoparticles by excessed mild stimuli and fabricate the magnetic heterostructure materials (Fe3 O4 @ TACN NPs (tetraamminecopper (II) nitrate)). Notably, the Fe3 O4 @ TACN NPs present with cat's-whisker structure containing ligand and metal center. The nitroso-group ligands exhibit strong binding affinity to heme-structure enzyme, ensuring effective capture and isolate of cytochrome C (Cyt-c), resulting in their excellent isolation property. The copper complex-powered magnetic heterostructure materials can effectively isolation Cyt-c from complex biological sample (pork heart). Importantly, the Fe3 O4 @ TACN NPs coordinated with heme-structure, induced methionine 80 (Met80) disassociates from heme prosthetic group, and contributed to peroxidase-like (POD-like) activities increasing. These results exhibit that copper complex-powered magnetic heterostructure materials can not only satisfy the Cyt-c isolation and immobilization in an alkaline medium, but also be of the potential for improving the immobilization enzyme reactor performance.

Nickel Sulfide/Hierarchical Porous Carbon from Spent Residue Hydrocracking Catalyst as Electrocatalyst for the Oxygen Evolution Reaction

Spent residue slurry-phase hydrocracking catalyst coated with coke have been classified as hazardous solid waste, presenting serious economic and environmental issues to refiners. Herein, the spent catalysts with a nickel sulfide nanoparticle/coke hierarchical structure (NiSX /C) from our previous work were used to prepare nickel sulfide/hierarchical porous carbon (NiSX /HPC) for the oxygen evolution reaction (OER) through the method of carbonization, activation, and sulfurization. The results indicate that the NiSX /C converts into Ni/HPC after carbonization and activation, and then transform into NiSX /HPC by sulfurization. The optimized NiSX /HPC-8 possesses the crystal phase of NiS2 , and the high specific surface area of 1134.9 m2  g-1 with the hierarchical micro-mesoporous structure. Besides, NiSX /HPC-8 achieves a low overpotential of 236 mV at 10 mA cm-2 , a low Tafel slope of 64.1 mV dec-1 , and excellent stability. This work provides a viable method for upcycling spent catalysts to re-constructed OER catalysts with high catalytic performance and durability.

Recent advances in proton exchange membrane water electrolysis

Proton exchange membrane water electrolyzers (PEMWEs) are an attractive technology for renewable energy conversion and storage. By using green electricity generated from renewable sources like wind or solar, high-purity hydrogen gas can be produced in PEMWE systems, which can be used in fuel cells and other industrial sectors. To date, significant advances have been achieved in improving the efficiency of PEMWEs through the design of stack components; however, challenges remain for their large-scale and long-term application due to high cost and durability issues in acidic conditions. In this review, we examine the latest developments in engineering PEMWE systems and assess the gap that still needs to be filled for their practical applications. We provide a comprehensive summary of the reaction mechanisms, the correlation among structure-composition-performance, manufacturing methods, system design strategies, and operation protocols of advanced PEMWEs. We also highlight the discrepancies between the critical parameters required for practical PEMWEs and those reported in the literature. Finally, we propose the potential solution to bridge the gap and enable the appreciable applications of PEMWEs. This review may provide valuable insights for research communities and industry practitioners working in these fields and facilitate the development of more cost-effective and durable PEMWE systems for a sustainable energy future.

A low-content CeOx dually promoted Ni3Fe@CNT electrocatalyst for overall water splitting

Rational construction of low-cost and high-performance electrocatalysts for water splitting is crucial for the advancement of renewable hydrogen fuel. Hybridizing heterojunctions or noble metals is one typical strategy used to boost the electrocatalytic performance for either the oxygen evolution reaction (OER) or hydrogen evolution reaction (HER). Here, low-content CeO_x (3.74 wt%) is introduced into Ni₃Fe nanoparticle-encapsulated carbon nanotubes (Ni₃Fe@CNTs/CeO_x), with both the OER and HER activities boosted, as a bifunctional electrocatalyst for overall water splitting. The composite is derived by pyrolyzing a mixture of melamine/ternary NiFeCe-layered double hydroxide. The composite electrocatalyst requires low overpotentials of 195 and 125 mV at 10 mA cm^-2 in 1.0 M KOH, respectively, which are superior to those of Ni₃Fe@CNTs/NF (313 and 139 mV) and CeO_x/NF (345 and 129 mV), and in particular, OER overpotentials of 320 and 370 mV at 50 and 100 mA cm^-2, respectively. Moreover, the composite-assembled electrolyzer for overall water splitting requires a current density of 10 mA cm^-2 at a decent cell voltage of 1.641 V. Furthermore, the enhancement is elucidated by the synergistic effect: the dual role of CeO_x in boosting the OER and HER, the highly conductive carbonaceous CNTs, large electrochemically active surface area and low charge-transfer resistance. The results can offer an effective route for designing and preparing low-cost and high-efficiency electrocatalysts for electrocatalytic water splitting.

p-n heterojunction constructed by γ-Fe2O3 covering CuO with CuFe2O4 interface for visible-light-driven photoelectrochemical water oxidation

Fe₂O₃ is a promising n-type semiconductor as the photoanode of photoelectrochemical water-splitting method due to its abundance, low cost, environment-friendly, and high chemical stability. However, the recombination of photogenerated holes and electrons leads to low solar-to-hydrogen efficiency. In this work, to overcome the recombination issue, a p-type semiconductor, CuO, is introduced underneath the γ-Fe₂O₃ to synthesize γ-Fe₂O₃/CuO on the FTO substrate. Along with the formation of p-n heterojunction, CuFe₂O₄ is in situ generated at the interface of γ-Fe₂O₃ and CuO. The existence of Cu₂O in CuO and CuFe₂O₄ promotes the charge transfer from CuO to γ-Fe₂O₃ and within CuFe₂O₄, respectively, resulting in creating an internal electric field in γ-Fe₂O₃/CuO and leading to the conduction band of CuO bending up and γ-Fe₂O₃ bending down. Additionally, Cu(II) in CuFe₂O₄ contributes to fast electron capture. Consequently, the charge transfer efficiency and charge separation efficiency of photo-generated holes are promoted. Hence, γ-Fe₂O₃/CuO exhibits an enhanced photocurrent density of 13.40 mA cm^-2 (1.9 times higher than γ-Fe₂O₃). The photo corrosion resistance of CuO is dramatically increased with the protection of CuFe₂O₄, resulting in superior high chemical stability, i.e. 85% of the initial activity remains after a long-term test.

Regulating Surface Charge by Embedding Ru Nanoparticles over 2D Hydroxides toward Water Oxidation

Exploring highly active and earth-abundant electrocatalysts for the oxygen evolution reaction (OER) is considered one of the prime prerequisites for generating green hydrogen. Herein, a competent microwave-assisted decoration of Ru nanoparticles (NPs) over the bimetallic layered double hydroxide (LDH) material is proposed. The same has been used as an OER catalyst in a 1 M KOH solution. The catalyst shows an interesting Ru NP loading dependency toward the OER, and a concentration-dependent volcanic relationship between electronic charge and thermoneutral current densities has been observed. This volcanic relation shows that with an optimum concentration of Ru NPs, the catalyst could effectively catalyze the OER by obeying the Sabatier principle of ion adsorption. The optimized Ru@CoFe-LDH(3%) demands an overpotential value of only 249 mV to drive a current density value of 10 mA/cm² with the highest TOF value of 14.4 s^-1 as compared to similar CoFe-LDH-based materials. In situ impedance experiments and DFT studies demonstrated that incorporating the Ru NPs boosts the intrinsic OER activity of the CoFe-LDH on account of sufficient activated redox reactivities for both Co and lattice oxygen of the CoFe-LDH. As a result, compared with the pristine CoFe-LDH, the current density of Ru@CoFe-LDH(3%) at 1.55 V vs RHE normalized by ECSA increased by 86.58%. First-principles DFT analysis shows that the optimized Ru@CoFe-LDH(3%) possesses a lower d-band center that indicates weaker and more optimal binding characteristics for OER intermediates, improving the overall OER performance. Overall, this report displays an excellent correlation between the decorated concentration of NPs over the LDH surface which can tune the OER activity as verified by both experimental and theoretical calculations.

Oxygen-vacancy-rich Co3O4@Fe-B-O heterostructure for efficient oxygen evolution reaction in alkaline and neutral media

Developing highly efficient OER catalysts is essential for producing hydrogen from water electrolysis to compensate for conventional fossil fuel shortages. Here, the oxygen-vacancy-rich heterostructure grown on the Ni foam (NF) (Co₃O₄@Fe-B-O/NF) is fabricated. The synergistic effect between Co₃O₄ and Fe-B-O has been proven effectively modulate the electronic structure and produce highly active interface sites, ultimately leading to enhanced electrocatalytic activity. Co₃O₄@Fe-B-O/NFrequiresan overpotential of 237 mV to drive 20 mA cm^-2 in 1 M KOH, and 384 mV to drive 10 mA cm^-2 in 0.1 M PBS, superior to most catalysts currently used. Moreover, Co₃O₄@Fe-B-O/NF as an oxygen evolution reaction (OER) electrode shows great potential in overall water splitting and CO₂ reduction reaction (CO₂RR). This work may provide effective ideas for designing efficient oxide catalysts.

Rhenium-Based Electrocatalysts for Water Splitting

Due to the contamination and global warming problems, it is necessary to search for alternative environmentally friendly energy sources. In this area, hydrogen is a promising alternative. Hydrogen is even more promising, when it is obtained through water electrolysis operated with renewable energy sources. Among the possible devices to perform electrolysis, proton exchange membrane (PEM) electrolyzers appear as the most promising commercial systems for hydrogen production in the coming years. However, their massification is affected by the noble metals used as electrocatalysts in their electrodes, with high commercial value: Pt at the cathode where the hydrogen evolution reaction occurs (HER) and Ru/Ir at the anode where the oxygen evolution reaction (OER) happens. Therefore, to take full advantage of the PEM technology for green H2 production and build up a mature PEM market, it is imperative to search for more abundant, cheaper, and stable catalysts, reaching the highest possible activities at the lowest overpotential with the longest stability under the harsh acidic conditions of a PEM. In the search for new electrocatalysts and considering the predictions of a Trasatti volcano plot, rhenium appears to be a promising candidate for HER in acidic media. At the same time, recent studies provide evidence of its potential as an OER catalyst. However, some of these reports have focused on chemical and photochemical water splitting and have not always considered acidic media. This review summarizes rhenium-based electrocatalysts for water splitting under acidic conditions: i.e., potential candidates as cathode materials. In the various sections, we review the mechanism concepts of electrocatalysis, evaluation methods, and the different rhenium-based materials applied for the HER in acidic media. As rhenium is less common for the OER, we included a section about its use in chemical and photochemical water oxidation and as an electrocatalyst under basic conditions. Finally, concluding remarks and perspectives are given about rhenium for water splitting.

Ternary alloy (FeCoNi) nanoparticles supported on hollow porous carbon with defects for enhanced oxygen evolution reaction

Low-cost non-noble metal nanoparticles are promising electrocatalysts that can catalyze oxygen evolution reaction (OER). Various factors such as poor activity and stability hinder the practical applications of these materials. The electroactivity and durability of the electrocatalysts can be improved by optimizing the morphology and composition of the materials. Herein, we report the successful synthesis of hollow porous carbon (HPC) catalysts loaded with ternary alloy (FeCoNi) nanoparticles (HPC-FeCoNi) for efficient OER. HPC is firstly synthesized by a facile carbon deposition method using the hierarchical porous zeolite ZSM-5 as the hard template. Numerous defects are generated on the carbon shell during the removal of zeolite template. Subsequently, FeCoNi alloy nanoparticles are supported on HPC by a sequence of impregnation and H₂ reduction processes. The synergistic effect between carbon defects and FeCoNi alloy nanoparticles endows the catalyst with an excellent OER performance (low overpotential of 219 mV; Tafel slope of 60.1 mV dec^-1) in a solution of KOH (1 M). A stable potential is maintained during the continuous operation over 72 h. The designed HPC-FeCoNi presents a platform for the development of electrocatalysts that can be potentially applied for industrial OER.

Facile method to activate substrate for oxygen evolution by a galvanic-cell reaction

NiFe layered double hydroxide (NiFe LDH) is a promising material with multiple functions. In this communication, a novel method is used to prepare NiFe LDH. This synthesis method is achieved via galvanic-cell corrosion between nickel and iron substrates in aqueous solutions containing a halogen group anion (e.g., Cl) at ambient temperature. The as-prepared NiFe LDH electrodes are developed as electrocatalysts for the oxygen evolution reaction (OER) and exhibit excellent catalytic activities and durability. This work provides an energy-efficient, cost-effective, and scaled-up corrosion engineering approach for manufacturing NiFe LDH materials.

Research on engineered electrocatalysts for efficient water splitting: a comprehensive review

Water electrolysis plays an interesting role toward hydrogen generation for overcoming global environmental crisis and solving the energy storage problem. However, there is still a deficiency of efficient electrocatalysts to overcome sluggish kinetics for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Great efforts have been employed to produce potential catalysts with low overpotential, rapid kinetics, and excellent stability for HER and OER. At present, hydrogen economy is driven by electrocatalysts with excellent characteristics; thus, systematic design strategy has become the driving force to exploit earth-abundant transition metal-based electrocatalysts toward H₂ economy. In this review, the recent progress on newer materials including metals, alloys, and transition metal oxides (manganese oxides, cobalt oxides, nickel oxides, PBA-derived metal oxides, and metal complexes) as photocatalysts/electrocatalysts has been overviewed together with some methodologies for efficient water splitting. Metal-organic framework (MOF)-based electrocatalysts have been highly exploited owing to their interesting functionalities. The photovoltaic-electrocatalytic (PV-EC) process focused on harvesting high solar-to-hydrogen efficiency (STH) among various solar energy conversion as well as storage systems. Electrocatalysts/photocatalysts with high efficiency have become an urgent need for overall water splitting. Also, cutting-edge achievements in the fabrication of electrocatalysts along with theoretical consideration have been discussed.

In situ phosphoselenization induced heterointerface engineering endow NiSe2/Ni2P/FeSe2 hollow nanocages with efficient water oxidation electrocatalysis performance

Exploiting Earth-abundant and highly effective electrocatalysts toward the oxygen evolution reaction (OER) is critical for boosting water splitting efficiency. Herein, we proposed a novel in situ phosphoselenization strategy to fabricate heterostructured NiSe₂/Ni₂P/FeSe₂ (NiFePSe) nanocages with a modified electronic structure and well-defined nanointerfaces. Owing to the strong interfacial coupling and synergistic effect among the three components, the prepared NiFePSe nanocages exhibit superior OER performance with an ultralow overpotential of 242 mV at 10 mA cm^-2 and a small Tafel slope of 55.8 mV dec^-1 along with robust stability in 1 M KOH. Remarkably, the highly open 3D porous architecture, delicate internal voids, and numerous surface defects endow the NiFePSe nanocages with abundant active sites and enhanced electron mobility. In addition, the super-hydrophilic surface is conducive to facilitating mass transfer between the electrolyte and electrode and rapidly releasing the bubbles. This work may lead to new breakthroughs in the tuning of multi-component transition metal catalysts and the designing of highly active and durable materials for water splitting.

Construction of nickel sulfide phase-heterostructure for alkaline hydrogen evolution reaction

Constructing transitionmetalsulfides (TMSs) heterostructure is an effective strategy to optimize the catalytic performance for hydrogen evolution reaction (HER) in alkaline medium. Herein, the rhombohedral nickel sulfide/hexagonal nickel sulfide (r-NiS/h-NiS) catalysts with the NiS phase-heterostructure were successfully fabricated by a simple one pot method. The r-NiS/h-NiS (1.25) (1.25 means the theoretical mole ratio of S and Ni added to reaction) displayed the excellent HER performance with low overpotential (101 ± 1 mV@10 mA cm^-2) and small Tafel slope (62.10 ± 0.1 mV dec^-1), which were superior to the pure phase r-NiS and h-NiS. In this work, the improved HER catalytic performances were attributed to the dense coupling interfaces between the r-NiS and h-NiS. This work shows the feasibility of construction NiS phase-heterostructure and provides a novel strategy for the application of NiS for water splitting.

Selectively Enhanced Electrocatalytic Oxygen Evolution within Nanoscopic Channels Fitting a Specific Reaction Intermediate for Seawater Splitting

Abundant availability of seawater grants economic and resource-rich benefits to water electrolysis technology requiring high-purity water if undesired reactions such as chlorine evolution reaction (CER) competitive to oxygen evolution reaction (OER) are suppressed. Inspired by a conceptual computational work suggesting that OER is kinetically improved via a double activation within 7 Å-gap nanochannels, RuO₂ catalysts are realized to have nanoscopic channels at 7, 11, and 14 Å gap in average (d_gap ), and preferential activity improvement of OER over CER in seawater by using nanochanneled RuO₂ is demonstrated. When the channels are developed to have 7 Å gap, the OER current is maximized with the overpotential required for triggering OER minimized. The gap value guaranteeing the highest OER activity is identical to the value expected from the computational work. The improved OER activity significantly increases the selectivity of OER over CER in seawater since the double activation by the 7 Å-nanoconfined environments to allow an OER intermediate (*OOH) to be doubly anchored to Ru and O active sites does not work on the CER intermediate (*Cl). Successful operation of direct seawater electrolysis with improved hydrogen production is demonstrated by employing the 7 Å-nanochanneled RuO₂ as the OER electrocatalyst.

Synergistically Enhanced Oxygen Evolution Catalysis with Surface Modified Halloysite Nanotube

Synergistically increased oxygen evolution reaction (OER) of manganese oxide (MnO₂) catalyst is introduced with surface-modified halloysite nanotube (Fe₃O₄-HNTs) structure. The flake shaped MnO₂ catalyst is attached on the nanotube template (Fe₃O₄-HNTs) by series of wet chemical and hydrothermal method. The strong interaction between MnO₂ and Fe₃O₄-HNTs maximized active surface area and inter-connectivity for festinate charge transfer reaction for OER. The synergistical effect between Fe₃O₄ layer and MnO₂ catalyst enhance the Mn³⁺/Mn⁴⁺ ratio by partial replacement of Mn ions with Fe. The relatively increased Mn^3+/Mn⁴⁺ ratio on MnO₂@FHNTs induced <italic>σ</italic><italic>^*</italic> orbital (e_g) occupation close to single electron, improving the OER performances. The MnO₂@FHNTs catalyst exhibited the reduced overpotential of 0.42 V (E <italic>vs</italic>. RHE) at 10 mA/cm² and Tafel slope of (99 mV/dec), compared with that of MnO₂ with unmodified HNTs (0.65 V, 219 mV/dec) and pristine MnO₂ (0.53 V, 205 mV/dec). The present study provides simple and innovative method to fabricate nano fiberized OER catalyst for a broad application of energy conversion and storage systems.

Accelerating Electrochemical Water Oxidation Activity by Tailoring Morphology and Electronic Structure of Nickel Organic Framework Nanoarrays with a Fe Etching Effect

Fe-mediated nickel organic framework nanoarrays (NiFe-MOFs NAs) on carbon cloth were successfully constructed from ultrathin nanosheets via an etching effect. This strategy also combined the dissolution and coordination effect of acidic ligand (2,6-naphthalenedicarboxylic acid, NDC) to a self-sacrificial template of Ni(OH)₂ NAs. Benefiting from the strong Fe etching effect, dense and thick brick-like Ni-NDC nanoplates were tailored into loose and ultrathin NiFe-NDC nanosheets with abundant squamous nanostructures, which were still tightly attached to carbon cloth. As a consequence, more coordinatively unsaturated metal sites (CUMSs) that served as active centers were exposed to accelerate oxygen production. Meanwhile, the electronic structure of active Ni centers was modulated by the incorporation of Fe atoms. The charge density redistribution between Ni and Fe ultimately optimized the energy barrier of the adsorption/desorption of oxygenated intermediates, promoting the kinetics for water oxidation.

Solar-Light-Responsive Zinc-Air Battery with Self-Regulated Charge-Discharge Performance based on Photothermal Effect

It is extremely challenging to significantly increase the voltaic efficiency, power density, and cycle stability of a Zn-air battery by just adjusting the catalytic performance of the cathode with nanometers/atomistic engineering because of the restriction of thermodynamic equilibrium potential. Herein, inspired by solar batteries, the S-atom-bridged FeNi particles and N-doped hollow carbon nanosphere composite configuration (FeNi-S,N-HCS) is presented as a prototype of muti-functional air electrode material (intrinsic electrocatalytic function and additional photothermal function) for designing photoresponsive all-solid-state Zn-air batteries (PR-ZABs) based on the photothermal effect. The local temperature of the FeNi-S,N-HCS electrode can well respond to the stimuli of sunlight irradiation because of their superior photothermal effect. As expected, under illumination, the power density of the as-fabricated PR-ZABs based on the FeNi-S,N-HCS electrode can be improved from 77 mW cm^-2 to 126 mW cm^-2. Simultaneously, charge voltage can be dramatically reduced, and cycle lifetime is also prolonged under illumination, because of the expedited electrocatalytic kinetics, the increased electrical conductivity, and the accelerated desorption rate of O₂ bubbles from the electrode. By exerting the intrinsic electrocatalytic and photothermal efficiency of the electrode materials, this research paves new ways to improve battery performance from kinetic and thermodynamic perspectives.

A critical review of research progress for metal alloy materials in hydrogen evolution and oxygen evolution reaction

Hydrogen produced by electrolyzing water has attracted extensive attention as an effective way to generate and store new energy by using renewable energy. Electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were the core reactions in the process of hydrogen production by water electrolysis, however, due to the low efficiency of the electrolytic device caused by its slow kinetic reaction and the dependence on noble metal catalysts (platinum and iridium/ruthenium (oxide)), which limited its wide application. The preparation of high-efficiency catalysts with high catalytic activity, stability, low cost and scalability played a vital role in promoting the development of hydrogen production technology from electrolytic water and has become a current research hotspot. Metal alloy catalysts have been widely studied as high-efficiency electrocatalysts. This study introduced and analyzed the mechanism and application of metal alloy catalyst in hydrogen and oxygen evolution reaction, summarized and discussed the progress in the design, preparation and application of metal alloy electrocatalysts. Finally, the strategy and prospect of new high-efficiency electrocatalysts were proposed.

NiFeOx and NiFeCoOx Catalysts for Anion Exchange Membrane Water Electrolysis

Hydrogen production using an Anion exchange membrane (AEM) electrolyzer allows the use of non-platinum group metal catalysts for oxygen evolution reaction (OER). Nickel and Cobalt-based oxides are active in an alkaline environment for OER and are relatively inexpensive compared to IrO2 catalysts used in Polymer electrolyte membrane (PEM) electrolysis. Mixed metal oxide catalysts NiFeOx and NiFeCoOx catalysts were synthesized by the coprecipitation method using NaOH. X-ray diffraction results showed mainly NiO diffraction peaks for the NiFeOx catalyst due to the low concentration of Fe, for the NiFeCoOx catalyst, NiCo2O4 diffraction peaks were observed. NiFeCoOx catalysts showed a higher Anion exchange membrane water electrolysis (AEMWE) performance compared to NiFeOx and commercial NiO, the highest current density at 2 V was 802 mA cm−2 at 70 °C using 1 M KOH as an electrolyte. The effect of electrolyte concentration was studied by using 0.01 M, 0.1 M and 1 M KOH concentrations in an electrolysis operation. Electrochemical Impedance spectroscopy was performed along with the equivalent circuit fitting to calculate ohmic and activation resistances, the results showed a decrease in ohmic and activation resistances with the increase in electrolyte concentration. Commercially available AEM (Fumasep FAA-3-50 and Sustainion dioxide membrane X-37-50 grade T) were tested at similar conditions and their performance was compared. EIS results showed that X-37-50 offered lower ohmic resistance than the FAA-3-50 membrane.

Co(OH)2 Nanoflowers Decorated α-NiMoO4 Nanowires as a Bifunctional Electrocatalyst for Efficient Overall Water Splitting

The development of bifunctional electrocatalysts with high catalytic activity and cyclic stability is an effective method for electrocatalytic water splitting. Herein, a promising hydroxide/oxide Co(OH)2/α-NiMoO4 NWs/CC heterostructure with nanoflowers decorating the nanowires was fabricated on a carbon cloth (CC) substrate via hydrothermal and calcination methods. In contrast to one-dimensional nanomaterials, the interfaces of Co(OH)2 nanoflowers and α-NiMoO4 nanowires on CC provide more active sites for electrocatalytic reactions; therefore, they exhibit obviously enhanced electrocatalytic activities in overall water splitting. Specifically, the Co(OH)2/α-NiMoO4 NWs/CC electrodes exhibit an overpotential of 183.01 mV for hydrogen evolution reaction (HER) and of 170.26 mV for oxygen evolution reactions (OER) at the current density of 10 mA cm−2 in 1.0 M KOH. Moreover, the electrocatalytic oxygen evolution reaction (OER) activity of the Co(OH)2/α-NiMoO4 NWs/CC electrocatalyst was enhanced after long-term stability tests.

Binder-Free Fabrication of Prussian Blue Analogues Based Electrocatalyst for Enhanced Electrocatalytic Water Oxidation

Developing a cost-effective, efficient, and stable oxygen evolution reaction (OER) catalyst is of great importance for sustainable energy conversion and storage. In this study, we report a facile one-step fabrication of cationic surfactant-assisted Prussian blue analogues (PBAs) M_x[Fe(CN)₅CH₃C₆H₄NH₂]∙yC₁₉H₃₄NBr abbreviated as SF[Fe-Tol-M] (where SF = N-tridecyl-3-methylpyridinium bromide and M = Mn, Co and Ni) as efficient heterogeneous OER electrocatalysts. The electrocatalysts have been characterized by Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) analysis, and X-ray photoelectron spectroscopy (XPS). In the presence of cationic surfactant (SF), PBAs-based electrodes showed enhanced redox current, high surface area and robust stability compared to the recently reported PBAs. SF[Fe-Tol-Co] hybrid catalyst shows superior electrochemical OER activity with a much lower over-potential (610 mV) to attain the current density of 10 mA cm⁻² with the Tafel slope value of 103 mV·dec⁻¹ than that for SF[Fe-Tol-Ni] and SF[Fe-Tol-Mn]. Moreover, the electrochemical impedance spectroscopy (EIS) unveiled that SF[Fe-Tol-Co] exhibits smaller charge transfer resistance, which results in a faster kinetics towards OER. Furthermore, SF[Fe-Tol-Co] offered excellent stability for continues oxygen production over extended reaction time. This work provides a surface assisted facile electrode fabrication approach for developing binder-free OER electrocatalysts for efficient water oxidation.

MOF-derived nanoarrays as advanced electrocatalysts for water splitting

Developing efficient, nanostructured electrocatalysts with the desired compositions and structures is of great significance for improving the efficiency of water splitting toward hydrogen production. In this regard, metal-organic framework (MOF) derived nanoarrays have attracted great attention as promising electrocatalysts because of their diverse compositions and adjustable structures. In this review, the recent progress in MOF-derived nanoarrays for electrochemical water splitting is summarized, highlighting the structural design of the MOF-derived nanoarrays and the electrocatalytic performance of the derived composite carbon materials, oxides, hydroxides, sulfides, and phosphides. In particular, the structure-performance relationships of the MOF-derived nanoarrays and the modulation strategies toward enhanced catalytic activity for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are discussed, providing insights into the development of advanced catalysts for the HER and OER. The challenges and prospects in this promising field for future industrial applications are also addressed.

Challenges and prospects of high-voltage aqueous electrolytes for energy storage applications

Aqueous electrolytes have attracted widespread attention as they are safe, environmentally benign and cost effective, holding great promise for future low-cost and sustainable energy storage devices. Nonetheless, the narrow electrochemical stability window caused by water electrolysis, as well as the trade-off between the stability window and other properties remain the bottleneck problem for the practical applications of aqueous electrolytes. Deep insights into the correlations between the microscopic physicochemical and electrochemical mechanisms and the macroscopic properties of aqueous electrolyte are essential for the envisaged applications, yet a systematic analysis of the recent progress in this area is still lacking. In this Perspective article, the basic mechanisms and influencing factors of water electrolysis including the hydrogen evolution and oxygen evolution reactions is critically examined. We systematically review the current state-of-the-art on high-voltage aqueous electrolytes focusing on the fundamental mechanisms of ion kinetics leading to dynamic electrolyte restructuring. Recent advances on the optimization of high-voltage aqueous electrolytes are also summarized. The existing challenges are identified and perspectives for exploring and developing future high-voltage aqueous electrolytes are provided.

Isovalent anion-induced electrochemical activity of doped Co3V2O8 for oxygen evolution reaction application

The activity of an OER electrocatalyst is a strong function of the reaction kinetics at the active sites, which can be influenced by catalytic engineering (e.g., heterostructure, doping, and the addition of cocatalysts). Herein, we report the improved reaction kinetics of cobalt oxide for the OER via the addition of high valence vanadium and thereafter doping with sulphur (S-Co₃V₂O₈). The addition of vanadium increases the oxygen vacancy while the doping of sulphur increases the electronic conductivity of the electrocatalyst. The synergic effect of the oxygen vacancy and electronic conductivity increases the activity of S-Co₃V₂O₈. Furthermore, S-Co₃V₂O₈ showed the least Tafel slope, which showed the activity enhancement towards the oxygen evolution reaction. Moreover, the underlying reaction mechanism is explored by electrochemical impedance spectroscopy, which reveals that the ratio of polarisation resistance to double-layer capacitance is minimum for S-Co₃V₂O₈, indicating the highest activity.