Phosphorus-Mediated MoS2 Nanowires as a High-Performance Electrode Material for Quasi-Solid-State Sodium-Ion Intercalation Supercapacitors

Synergistic Cathode Design for High-Performance Dual-Salt Magnesium/Lithium-Ion Batteries Using 2D/2D 1T/2H-MoS2@Ti3C2Tx MXene Nanocomposite

Magnesium-ion batteries (MIBs) and dual-salt magnesium/lithium-ion batteries (MLIBs) have emerged as promising contenders for next-generation energy storage. In contrast to lithium metal anode in lithium metal batteries, magnesium metal anode in MIBs and MLIBs presents a safer alternative due to the limited dendrite growth and higher volumetric capacity, along with higher natural abundance. This study explores a MLIB configuration with a novel cathode design by employing a 2D/2D nanocomposite of 1T/2H mixed phase MoS2 and delaminated Ti3C2Tx MXene (1T/2H-MoS2@MXene) to address challenges associated with slow kinetics of magnesium ions during cathode interactions. This cathode design takes advantage of the high electrical conductivity of Ti3C2Tx MXene and the expanded interlayer spacing with enhanced conductivity of the 1T metallic phase in 1T/2H mixed phase MoS2. Through a designed synthesis method, the resulting nanocomposite cathode maintains structural integrity, enabling the stable and reversible storage of dual Mg2+ and Li+ ions. The nanocomposite cathode demonstrates superior performance in MLIBs compared to individual components (253 mAh g-1 at 50 mA g-1, and 36% of capacity retention at 1,000 mA g-1), showcasing short ion transport paths and fast ion storage kinetics. This work represents a significant advancement in cathode material design for cost-effective and safe MLIBs.

Hybrid and Asymmetric Supercapacitors: Achieving Balanced Stored Charge across Electrode Materials

An electrochemical capacitor configuration extends its operational potential window by leveraging diverse charge storage mechanisms on the positive and negative electrodes. Beyond harnessing capacitive, pseudocapacitive, or Faradaic energy storage mechanisms and enhancing electrochemical performance at high rates, achieving a balance of stored charge across electrodes poses a significant challenge over a wide range of charge-discharge currents or sweep rates. Consequently, fabricating hybrid and asymmetric supercapacitors demands precise electrochemical evaluations of electrode materials and the development of a reliable methodology. This work provides an overview of fundamental aspects related to charge-storage mechanisms and electrochemical methods, aiming to discern the contribution of each process. Subsequently, the electrochemical properties, including the working potential windows, rate capability profiles, and stabilities, of various families of electrode materials are explored. It is then demonstrated, how charge balancing between electrodes falters across a broad range of charge-discharge currents or sweep rates. Finally, a methodology for achieving charge balance in hybrid and asymmetric supercapacitors is proposed, outlining multiple conditions dependent on loaded mass and charge-discharge current. Two step-by-step tutorials and model examples for applying this methodology are also provided. The proposed methodology is anticipated to stimulate continued dialogue among researchers, fostering advancements in achieving stable and high-performance supercapacitor devices.

Multiscale Structural Design of 2D Nanomaterials-based Flexible Electrodes for Wearable Energy Storage Applications

2D nanomaterials play a critical role in realizing high-performance flexible electrodes for wearable energy storge devices, owing to their merits of large surface area, high conductivity and high strength. The electrode is a complex system and the performance is determined by multiple and interrelated factors including the intrinsic properties of materials and the structures at different scales from macroscale to atomic scale. Multiscale design strategies have been developed to engineer the structures to exploit full potential and mitigate drawbacks of 2D materials. Analyzing the design strategies and understanding the working mechanisms are essential to facilitate the integration and harvest the synergistic effects. This review summarizes the multiscale design strategies from macroscale down to micro/nano-scale structures and atomic-scale structures for developing 2D nanomaterials-based flexible electrodes. It starts with brief introduction of 2D nanomaterials, followed by analysis of structural design strategies at different scales focusing on the elucidation of structure-property relationship, and ends with the presentation of challenges and future prospects. This review highlights the importance of integrating multiscale design strategies. Finding from this review may deepen the understanding of electrode performance and provide valuable guidelines for designing 2D nanomaterials-based flexible electrodes.

Building Feedback-Regulation System Through Atomic Design for Highly Active SO2 Sensing

Reasonably constructing an atomic interface is pronouncedly essential for surface-related gas-sensing reaction. Herein, we present an ingenious feedback-regulation system by changing the interactional mode between single Pt atoms and adjacent S species for high-efficiency SO2 sensing. We found that the single Pt sites on the MoS2 surface can induce easier volatilization of adjacent S species to activate the whole inert S plane. Reversely, the activated S species can provide a feedback role in tailoring the antibonding-orbital electronic occupancy state of Pt atoms, thus creating a combined system involving S vacancy-assisted single Pt sites (Pt-Vs) to synergistically improve the adsorption ability of SO2 gas molecules. Furthermore, in situ Raman, ex situ X-ray photoelectron spectroscopy testing and density functional theory analysis demonstrate the intact feedback-regulation system can expand the electron transfer path from single Pt sites to whole Pt-MoS2 supports in SO2 gas atmosphere. Equipped with wireless-sensing modules, the final Pt1-MoS2-def sensors array can further realize real-time monitoring of SO2 levels and cloud-data storage for plant growth. Such a fundamental understanding of the intrinsic link between atomic interface and sensing mechanism is thus expected to broaden the rational design of highly effective gas sensors.

1T-2H Mixed-Phase MoS2 Stabilized with a Hyperbranched Polyethylene Ionomer for Mg2+ /Li+ Co-Intercalation Toward High-Capacity Dual-Salt Batteries

Dual-salt magnesium/lithium-ion batteries (MLIBs) benefit from fast lithium ion diffusion on the cathode side while providing safety due to the dendrite-free Mg2+ stripping/plating mechanism on the anode side. Bulk MoS2 (B-MoS2 ), as a cathode for magnesium-ion batteries (MIBs), suffers from low conductivity and relatively van der Waals gaps and, consequently, resists against divalent Mg2+ insertion due to the high Coulombic interactions. In MLIBs, it exhibits a Daniell-cell type mechanism with the sole accommodation of Li+ . In this paper, the synthesis of a 1T/2H mixed-phase MoS2 (MP-MoS2 ) modified with a hyperbranched polyethylene ionomer, I@MP-MoS2 , for high-capacity MLIBs with a distinct Mg2+ /Li+ co-intercalation mechanism is reported. Benefiting from the enhanced conductivity (due to 53% metallic 1T phase), expanded van der Waals gaps (79% expansion compared to B-MoS2 , 1.11 vs 0.62 nm), and enhanced interactions with THF-based electrolytes following the modification, I@MP-MoS2 shows a dramatically increased Mg2+ storage compared to its parent analogue (144 mAh g-1 vs ≈2 mAh g-1 at 20 mA g-1 ). In MLIBs, I@MP-MoS2 is demonstrated to exhibit remarkable specific capacities up to ≈270 mAh g-1 at 20 mA g-1 through a Mg2+ /Li+ co-intercalation mechanism with 87% of capacity retention over 200 cycles at 100 mA g-1 .

Building hybrid structure of monolayered S-depleted Mo-S nanocrystals and 3D graphene towards promising aqueous supercapacitor applications

Two-dimensional (2D) 1H molybdenum disulfide (1H-MoS2) is hard to be directly used in energy storage devices due to its inert basal plane and unfavorable 2D stacking. This work demonstrated how the basal plane of 1H MoS2nanocrystals (NCs) can be activated to offer doubled specific capacitance by simple surface S depletions. Building on the expanded graphene with three-dimensional (3D) structures, as-prepared NCs were chemically grafted on the graphene surface to deliver stable energy storage and high capacitance, which overcame above challenges of 1H-MoS2. Aside from the mostly focused metastable phase, this work confirmed that the stable 1H Mo-S material is also promising in energy storage applications.

Phosphorus doped molybdenum disulfide regulated by sodium chloride for advanced supercapacitor electrodes

As a pseudocapacitor electrode material, molybdenum disulfide (MoS2) usually shows inferior capacity, rate capability and cyclability. Structural regulation and heteroatom doping are the available methods to ameliorate the electrochemical properties of MoS2. Herein, phosphorus doped molybdenum disulfide regulated by sodium chloride (SP-MoS2) is successfully synthesized using phosphomolybdate acid as a molybdenum source and an in situ dopant and sodium chloride (NaCl) as a structural regulator. Under the structural regulation of NaCl, the SP-MoS2 nanosheets exhibit an interweaved architecture with a large interlayer spacing of 0.68 nm. Owing to the in situ P doping and large specific surface area (21.0 m2 g-1), the SP-MoS2 electrode possesses a maximum capacity of 564.8 F g-1 at 1 A g-1 and retains 56.3% of the original capacity at 20 A g-1. Density functional theory (DFT) calculations indicate that SP-MoS2 displays a high K+ average adsorption energy of -3.636 eV. In addition, the fabricated SP-MoS2//AC asymmetric supercapacitor device displays an energy density of 22.8 W h kg-1 at 759 W kg-1.

Strategies for Advanced Supercapacitors Based on 2D Transition Metal Dichalcogenides: From Material Design to Device Setup

Recently, the development of new materials and devices has become the main research focus in the field of energy. Supercapacitors (SCs) have attracted significant attention due to their high power density, fast charge/discharge rate, and excellent cycling stability. With a lamellar structure, 2D transition metal dichalcogenides (2D TMDs) emerge as electrode materials for SCs. Although many 2D TMDs with excellent energy storage capability have been reported, further optimization of electrode materials and devices is still needed for competitive electrochemical performance. Previous reviews have focused on the performance of 2D TMDs as electrode materials in SCs, especially on their modification. Herein, the effects of element doping, morphology, structure and phase, composite, hybrid configuration, and electrolyte are emphatically discussed on the overall performance of 2D TMDs-based SCs from the perspective of device optimization. Finally, the opportunities and challenges of 2D TMDs-based SCs in the field are highlighted, and personal perspectives on methods and ideas for high-performance energy storage devices are provided.

Self-assembled molybdenum disulfide nanoflowers regulated by lithium sulfate for high performance supercapacitors

Recently, molybdenum disulfide (MoS2) has been extensively investigated as a promising pseudocapacitor electrode material. However, MoS2 usually exhibits inferior rate capability and cyclability, which restrain its practical application in energy storage. In this work, MoS2 nanoflowers regulated by Li2SO4 (L-MoS2) are successfully fabricated via intercalating solvated Li ions. Via appropriate intercalation of Li2SO4, MoS2 nanosheets could self-assemble to form L-MoS2 nanoflowers with an interlayer spacing of 0.65 nm. Due to the large specific surface area (23.7 m2 g-1) and high 1T phase content (77.5%), L-MoS2 as supercapacitor electrode delivers a maximum specific capacitance of 356.7 F g-1 at 1 A g-1 and maintains 49.8% of capacitance retention at 20 A g-1. Moreover, the assembled L-MoS2 symmetric supercapacitor (SSC) device displays an energy density of 6.5 W h kg-1 and 79.6% of capacitance retention after 3000 cycles.

Covalently Interlayer-Confined Organic-Inorganic Heterostructures for Aqueous Potassium Ion Supercapacitors

Artificial assembly of organic-inorganic heterostructures for electrochemical energy storage at the molecular level is promising, but remains a great challenge. Here, a covalently interlayer-confined organic (polyaniline [PANI])-inorganic (MoS₂ ) hybrid with a dual charge-storage mechanism is developed for boosting the reaction kinetics of supercapacitors. Systematic characterizations reveal that PANI induces a partial phase transition from the 2H to 1T phases of MoS₂ , expands the interlayer spacing of MoS₂ , and increases the hydrophilicity. More in-depth insights from the synchrotron radiation-based X-ray technique illustrate that the covalent grafting of PANI to MoS₂  induces the formation of MoN bonds and unsaturated Mo sites, leading to increased active sites. Theoretical analysis reveals that the covalent assembly facilitates cross-layer electron transfer and decreases the diffusion barrier of K⁺ ions, which favors reaction kinetics. The resultant hybrid material exhibits high specific capacitance and good rate capability. This design provides an effective strategy to develop organic-inorganic heterostructures for superior K-ion storage. The K-ion storage mechanism concerning the reversible insertion/extraction upon charge/discharge is revealed through ex situ X-ray photoelectron spectroscopy.

Perspective of 2D Integrated Electronic Circuits: Scientific Pipe Dream or Disruptive Technology?

Within the last decade, considerable efforts have been devoted to fabricating transistors utilizing 2D semiconductors. Also, small circuits consisting of a few transistors have been demonstrated, including inverters, ring oscillators, and static random access memory cells. However, for industrial applications, both time-zero and time-dependent variability in the performance of the transistors appear critical. While time-zero variability is primarily related to immature processing, time-dependent drifts are dominated by charge trapping at defects located at the channel/insulator interface and in the insulator itself, which can substantially degrade the stability of circuits. At the current state of the art, 2D transistors typically exhibit a few orders of magnitude higher trap densities than silicon devices, which considerably increases their time-dependent variability, resulting in stability and yield issues. Here, the stability of currently available 2D electronics is carefully evaluated using circuit simulations to determine the impact of transistor-related issues on the overall circuit performance. The results suggest that while the performance parameters of transistors based on certain material combinations are already getting close to being competitive with Si technologies, a reduction in variability and defect densities is required. Overall, the criteria for parameter variability serve as guidance for evaluating the future development of 2D technologies.

One-pot synthesis of TEA functionalized and NiSe embedded rGO nanocomposites for supercapacitor application

NiSe and NG-NiSe (triethanolamine functionalized and NiSe embedded rGO), as electrode materials for supercapacitor application, were prepared by a hydrothermal technique. XRD confirmed the formation of pure NiSe and NG-NiSe nanocomposites, which showed a hexagonal crystalline structure of NiSe. The structural morphology and particle size of NiSe and NG-NiSe were measured using FESEM and HRTEM analysis, respectively. The oxidation states and elemental compositions of NG-NiSe were investigated by XPS. The electrochemical behaviours of the materials were studied using CV, GCD, and EIS spectra. NG-NiSe showed higher capacitance performance compared to pure NiSe, due to the synergetic effects on the rGO/TEA/NiSe nanocomposite during one-pot synthesis. The energy density and power density of a N-rGO//NG-NiSe asymmetric cell were 28.25 W h kg^-1 and 700 W kg^-1, respectively.

Synthesis of P-doped NiS as an electrode material for supercapacitors with enhanced rate capability and cycling stability

Coral-like P-doped NiS nanocrystals were successfully synthesized by a two-step solvent-thermal method. The P-doped NiS electrode presented enhanced high capacitance, rate performance, and cycle life.

Preparation and application of a flower-rod-like Bi2S3/Co3O4/rGO/nickel foam supercapacitor electrode

Herein, we have prepared a new nanocomposite Bi2S3/Co3O4/rGO/Ni foam substrate electrode through hydrothermal synthesis and an annealing process.

Recent Advances and Perspectives of Battery-Type Anode Materials for Potassium Ion Storage

Potassium ion energy storage devices are competitive candidates for grid-scale energy storage applications owing to the abundancy and cost-effectiveness of potassium (K) resources, the low standard redox potential of K/K⁺, and the high ionic conductivity in K-salt-containing electrolytes. However, the sluggish reaction dynamics and poor structural instability of battery-type anodes caused by the insertion/extraction of large K⁺ ions inhibit the full potential of K ion energy storage systems. Extensive efforts have been devoted to the exploration of promising anode materials. This Review begins with a brief introduction of the operation principles and performance indicators of typical K ion energy storage systems and significant advances in different types of battery-type anode materials, including intercalation-, mixed surface-capacitive-/intercalation-, conversion-, alloy-, mixed conversion-/alloy-, and organic-type materials. Subsequently, host-guest relationships are discussed in correlation with the electrochemical properties, underlying mechanisms, and critical issues faced by each type of anode material concerning their implementation in K ion energy storage systems. Several promising optimization strategies to improve the K⁺ storage performance are highlighted. Finally, perspectives on future trends are provided, which are aimed at accelerating the development of K ion energy storage systems.

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries owing to the low cost, natural abundance of potassium resources, the low standard reduction potential of potassium, and fascinating K⁺ transport kinetics in the electrolyte. However, the low energy density and unstable cycle life of cathode materials hamper their practical application. Therefore, cathode materials with high capacities, high redox potentials, and good structural stability are required with the advancement toward next-generation PIBs. To this end, understanding the structure-dependent intercalation electrochemistry and recognizing the existing issues relating to cathode materials are indispensable prerequisites. This review summarizes the recent advances of PIB cathode materials, including metal hexacyanometalates, layered metal oxides, polyanionic frameworks, and organic compounds, with an emphasis on the structural advantages of the K⁺ intercalation reaction. Moreover, major current challenges with corresponding strategies for each category of cathode materials are highlighted. Finally, future research directions and perspectives are presented to accelerate the development of PIBs and facilitate commercial applications. It is believed that this review will provide practical guidance for researchers engaged in developing next-generation advanced PIB cathode materials.

Controllably Doping Nitrogen into 1T/2H MoS2 Heterostructure Nanosheets for Enhanced Supercapacitive and Electrocatalytic Performance by Low-Power N2 Plasma

Molybdenum disulfide (MoS₂) is a promising candidate for use as a supercapacitor electrode material and non-noble-metal electrocatalyst owing to its relatively high theoretical specific capacitance, Pt-like electronic feature, and graphene-like structure. However, insufficient electrochemically active sites along with poor conductivity significantly hinder its practical application. Heteroatom doping and phase engineering have been regarded as effective ways to overcome the inherent limitations of MoS₂ and enhance its ion storage and electrocatalytic performance. In this study, a plasma-assisted nitrogen-doped 1T/2H MoS₂ heterostructure has been proposed for the first time, resulting in excellent supercapacitor performance and hydrogen evolution reaction activity. XPS, Raman, and TEM analysis results indicate that N atoms have been successfully doped into MoS₂ nanosheets via room-temperature low-power N₂ plasma, and the 1T/2H hybrid phase is maintained. As expected, the 1T/2H MoS₂ heterostructure after a 10 min plasma treatment displayed a much boosted supercapacitive performance with a high specific capacitance of 410 F g^-1 at 1 A g^-1 and an excellent hydrogen evolution property with a low overpotential of 131 mV vs RHE at 10 mA cm^-2 for hydrogen evolution reaction. The excellent performance is superior to most of the recently reported outstanding MoS₂-based electrode and electrocatalytic materials. Moreover, the as-assembled flexible symmetric supercapacitor shows a high specific capacitance of 84.8 F g^-1 and superior mechanical robustness with 84.5% capacity retention after 2000 bending cycles.

Interface chemistry of two-dimensional heterostructures - fundamentals to applications

Two-dimensional heterostructures (2D HSs) have emerged as a new class of materials where dissimilar 2D materials are combined to synergise their advantages and alleviate shortcomings. Such a combination of dissimilar components into 2D HSs offers fascinating properties and intriguing functionalities attributed to the newly formed heterointerface of constituent components. Understanding the nature of the surface and the complex heterointerface of HSs at the atomic level is crucial for realising the desired properties, designing innovative 2D HSs, and ultimately unlocking their full potential for practical applications. Therefore, this review provides the recent progress in the field of 2D HSs with a focus on the discussion of the fundamentals and the chemistry of heterointerfaces based on van der Waals (vdW) and covalent interactions. It also explains the challenges associated with the scalable synthesis and introduces possible methodologies to produce large quantities with good control over the heterointerface. Subsequently, it highlights the specialised characterisation techniques to reveal the heterointerface formation, chemistry and nature. Afterwards, we give an overview of the role of 2D HSs in various emerging applications, particularly in high-power batteries, bifunctional catalysts, electronics, and sensors. In the end, we present conclusions with the possible solutions to the associated challenges with the heterointerfaces and potential opportunities that can be adopted for innovative applications.

Carbon-Based Quantum Dots for Supercapacitors: Recent Advances and Future Challenges

Carbon-based Quantum dots (C-QDs) are carbon-based materials that experience the quantum confinement effect, which results in superior optoelectronic properties. In recent years, C-QDs have attracted attention significantly and have shown great application potential as a high-performance supercapacitor device. C-QDs (either as a bare electrode or composite) give a new way to boost supercapacitor performances in higher specific capacitance, high energy density, and good durability. This review comprehensively summarizes the up-to-date progress in C-QD applications either in a bare condition or as a composite with other materials for supercapacitors. The current state of the three distinct C-QD families used for supercapacitors including carbon quantum dots, carbon dots, and graphene quantum dots is highlighted. Two main properties of C-QDs (structural and electrical properties) are presented and analyzed, with a focus on the contribution to supercapacitor performances. Finally, we discuss and outline the remaining major challenges and future perspectives for this growing field with the hope of stimulating further research progress.

Modified Co4N by B-doping for high-performance hybrid supercapacitors

High-performance energy storage systems are becoming essential to cope with the possible energy crisis in the future. Herein, unique hierarchical B-Co₄N have been reasonably designed and synthesized on Ni foam (NF) via a typical chemical reduction strategy. The successful realization of B-doping engineering effectively facilitates ion and electron transport, adding the electrochemically reactive sites, which endow the B-Co₄N-20/NF electrode with high specific capacity (817.9 C g^-1 at 1 A g^-1), excellent rate capability (maintained about 90.9% at 10 A g^-1) and cycling stability (about 93.06% retention of the initial capacity after 5000 cycles). The corresponding hybrid supercapacitor assembled with B-Co₄N-20/NF electrodes has an energy density of 25.85 W h kg^-1 at the power density of 800.2 W kg^-1 and a long cycle life (98.59% retention ratio after 5000 cycles). These remarkable properties indicate that the doping of heteroatom and the construction of hierarchical structure will provide a favorable reference for the performance promotion of next-generation energy storage devices.

True Meaning of Pseudocapacitors and Their Performance Metrics: Asymmetric versus Hybrid Supercapacitors

The development of pseudocapacitive materials for energy-oriented applications has stimulated considerable interest in recent years due to their high energy-storing capacity with high power outputs. Nevertheless, the utilization of nanosized active materials in batteries leads to fast redox kinetics due to the improved surface area and short diffusion pathways, which shifts their electrochemical signatures from battery-like to the pseudocapacitive-like behavior. As a result, it becomes challenging to distinguish "pseudocapacitive" and "battery" materials. Such misconceptions have further impacted on the final device configurations. This Review is an earnest effort to clarify the confusion between the battery and pseudocapacitive materials by providing their true meanings and correct performance metrics. A method to distinguish battery-type and pseudocapacitive materials using the electrochemical signatures and quantitative kinetics analysis is outlined. Taking solid-state supercapacitors (SSCs, only polymer gel electrolytes) as an example, the distinction between asymmetric and hybrid supercapacitors is discussed. The state-of-the-art progress in the engineering of active materials is summarized, which will guide for the development of real-pseudocapacitive energy storage systems.

Mixed-valent MnSiO3/C nanocomposite for high-performance asymmetric supercapacitor

In this work, carbon-coated manganese silicate (MnSiO₃/C) nanocomposite with excellent cycling stability was fabricated via a cost-effective process. The carbon coating followed with a CO₂ heat treatment process on the manganese silicate results in mixed-valent hierarchically-porous nanoparticles, which tightly connects with an ultrathin (∼1.5 nm) and ordered carbon coating layer. This composite features rectangular-like cyclic voltammetry curve with two couples of redox peaks, suppressing the irreversible reactions and thus providing a broad and stable working voltage. By fitting the CV curves, the MnSiO₃/C demonstrates a capacitive energy-storage behavior. The as-assembled activated carbon//MnSiO₃/C asymmetric supercapacitor in 1 M Na₂SO₄ aqueous electrolyte is found to have excellent cycling stability, with 95.5% retention of initial after 10,000 cycles. This device could deliver 25.8 W h kg^-1 energy density at the power density of 1 kW kg^-1 with ∼10 mg cm^-2 high mass loading, suggesting a bright prospect in practical application.

Defect-Rich Heterogeneous MoS2/NiS2 Nanosheets Electrocatalysts for Efficient Overall Water Splitting

Designing and constructing bifunctional electrocatalysts is vital for water splitting. Particularly, the rational interface engineering can effectively modify the active sites and promote the electronic transfer, leading to the improved splitting efficiency. Herein, free-standing and defect-rich heterogeneous MoS2/NiS2 nanosheets for overall water splitting are designed. The abundant heterogeneous interfaces in MoS2/NiS2 can not only provide rich electroactive sites but also facilitate the electron transfer, which further cooperate synergistically toward electrocatalytic reactions. Consequently, the optimal MoS2/NiS2 nanosheets show the enhanced electrocatalytic performances as bifunctional electrocatalysts for overall water splitting. This study may open up a new route for rationally constructing heterogeneous interfaces to maximize their electrochemical performances, which may help to accelerate the development of nonprecious electrocatalysts for overall water splitting.

High Energy Capacitors Based on All Metal-Organic Frameworks Derivatives and Solar-Charging Station Application

High energy and efficient solar charging stations using electrochemical capacitors (ECs) are a promising portable power source for the future. In this work, two kinds of metal-organic framework (MOF) derivatives, NiO/Co₃ O₄ microcubes and Fe₂ O₃ microleaves, are prepared via thermal treatment and assembled into electrochemical capacitors, which deliver a relatively high specific energy density of 46 Wh kg^-1 at 690 W kg^-1 . In addition, a solar-charging power system consisting of the electrochemical capacitors and monocrystalline silicon plates is fabricated and a motor fan or 25 LEDs for 5 and 30 min, respectively, is powered. This work not only adds two novel materials to the growing categories of MOF-derived advanced materials, but also successfully achieves an efficient solar-ECs system for the first time based on all MOF derivatives, which has a certain reference for developing efficient solar-charge systems.