Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Electrochemiluminescence immunosensor for the sensitive detection of the pancreatic neuroendocrine tumor biomarker chromogranin B based on graphdiyne quantum dots

Neuroendocrine tumor (NET) is a rare and heterogeneous tumor with an increasing incidence, which is often misdiagnosed and frequently presents with distant metastases at the time of diagnosis. Chromogranin B (CgB) is not influenced by other diseases or drug factors, such as proton pump inhibitors (PPIs), and is therefore expected to serve as a complementary biomarker to improve the early diagnosis of NET. However, the detection sensitivity of CgB urgently requires improvement. In this study, a highly sensitive ECL immunosensor was designed for the detection of CgB. Graphdiyne quantum dots (GDY QDs), synthesized via the hydrothermal treatment of graphdiyne (GDY) nanosheets, exhibited good biocompatibility and a high electrochemiluminescence (ECL) quantum yield (ΦECL = 218.5%) when using K2S2O8 as a co-reactant. With remarkable conductivity and a large surface area, Au NPs effectively loaded a high amount of GDY QDs, thereby enhancing the ECL response. Therefore, the developed ECL immunosensor showed exceptional analytical performance for CgB detection, demonstrating excellent linearity over a range of 10 fg mL-1 to 100 ng mL-1, with a limit of detection as low as 1.84 fg mL-1 (S/N = 3). Moreover, this immunosensor could detect CgB levels in clinical serum and functioned synergistically with enzyme-linked immunosorbent assay (ELISA). This work expands the application of GDY QDs in ECL biosensors while also providing a highly sensitive detection method for CgB.

Utilisation of Carbon Quantum Dots from Hazelnut Husk for Folic Acid (FA) Detection: An Innovative Approach

This study presents the development of a carbon quantum dot (CQD)-based fluorescence sensor for the accurate quantification of Folic Acid (FA). CQDs were synthesized from hazelnut husk using a solvothermal method and functionalized with silver ions to create an "off-state" fluorescence system. Upon mixing FA solutions, prepared from pure water and pharmaceutical tablets, with phosphate-buffered saline (PBS) and "off-state" CQDs, fluorescence emission was restored ("on-state") in a concentration-dependent manner when excited at 360 nm. A strong linear relationship was observed between FA concentration and fluorescence intensity, with an R² value of ≈ 0.994. The samples were categorized into low (0.0376-0.7533 µM) and high (0.7533-7.533 µM) concentration groups for improved accuracy, achieving mean percentage errors of 0.70% and 1.85%, respectively, at concentrations as low as 0.565 µM. This CQD-based sensor demonstrated rapid, cost-effective, and highly sensitive detection capabilities, making it a promising alternative for FA quantification in biomedical and nutritional applications. Furthermore, the use of sustainable raw materials, such as hazelnut husk, highlights the eco-friendly and practical advantages of this method over conventional techniques.

Turning the band alignment of carbon dots for visible-light-driven enzymatic asymmetric reduction of aromatic ketone

Keto reductases are crucial NAD(P)H-dependent enzymes used for the enantioselective synthesis of alcohols from prochiral ketones. Typically, the NADPH cofactor is regenerated through a second enzyme and/or substrate. However, photocatalytic cofactor regeneration using water as a sacrificial electron and hydrogen donor presents a promising alternative, albeit a challenging one. Herein we fabricated several nitrogen-doped carbon dots (CDs) with visible light absorption properties, good water solubility and biocompatibility for photocatalytic regeneration of NADPH. The CD with a smaller size and suitable redox potential gave the highest NADPH yield (55.7 %). Based on this, NADPH-dependent aldo-keto reductase crosslinked aggregates (AKR-CLEs) were initially applied as a stable biocatalyst to reduce the prochiral ketone. (S)-1-(2-Chlorophenyl) ethanol, an intermediate for LPA1R antagonists, was obtained in 65.3 % yield and 99.99 % enantiomeric excess (ee) under visible light irradiation. The isotope tracer experiment confirmed that water is the hydrogen donor in this light-driven, photo-enzymatic asymmetric hydrogenation system. This method is useful for the sustainable synthesis of chiral alcohols. Moreover, the general principle of utilizing water as the sacrificial hydrogen and electron donor holds potential for application in other redox cofactor regeneration systems.

Layer-by-Layer Nanoarchitectonics: A Method for Everything in Layered Structures

The development of functional materials and the use of nanotechnology are ongoing projects. These fields are closely linked, but there is a need to combine them more actively. Nanoarchitectonics, a concept that comes after nanotechnology, is ready to do this. Among the related research efforts, research into creating functional materials through the formation of thin layers on surfaces, molecular membranes, and multilayer structures of these materials have a lot of implications. Layered structures are especially important as a key part of nanoarchitectonics. The diversity of the components and materials used in layer-by-layer (LbL) assemblies is a notable feature. Examples of LbL assemblies introduced in this review article include quantum dots, nanoparticles, nanocrystals, nanowires, nanotubes, g-C3N4, graphene oxide, MXene, nanosheets, zeolites, nanoporous materials, sol-gel materials, layered double hydroxides, metal-organic frameworks, covalent organic frameworks, conducting polymers, dyes, DNAs, polysaccharides, nanocelluloses, peptides, proteins, lipid bilayers, photosystems, viruses, living cells, and tissues. These examples of LbL assembly show how useful and versatile it is. Finally, this review will consider future challenges in layer-by-layer nanoarchitectonics.

Deep eutectic solvent-assisted carbon quantum dots from biomass Triticum aestivum: A fluorescent sensor for nanomolar detection of dual analytes mercury (Ⅱ) and glutathione

Deep eutectic solvents (DESs) have attracted significant attention in recent years due to its environment friendly characteristics and its participation in the multi-heteroatom doping of carbon quantum dots (CQDs). In this work, we present a simple, fast, and environment-friendly microwave synthesis approach for the synthesis of DES-assisted nitrogen and chloride co-doped CQDs (N,Cl-CQDs) using a choline chloride-urea based DES. A biomass-based precursor, i.e., wheatgrass (Triticum aestivum), has been used as a carbon source. Transmission electron microscopy (TEM) showed the spherical shape with average 1.75 nm particle diameter of prepared CQDs. The surface functionality and chemical composition of prepared N,Cl-CQDs were determined by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopic techniques. The N,Cl-CQDs obtained a high quantum yield (QY), i.e., 36 %, compared to undoped CQDs, which were synthesized in an aqueous medium (QY = 15 %). The prepared N,Cl-CQDs showed significant properties such as excellent photostability, favorable water solubility, and high optical stability. N,Cl-CQDs were used as sensing platform for the detection of Hg2+ ions and GSH with LOD value of 39 nM and 43 nM, respectively. The fluorescence quenching mechanism was confirmed by several photophysical parameters, such as average lifetime values, radiative rate constant (k r ), non-radiative rate constant (knr) and others. Furthermore, the current sensing system's viability is also tested in a river water sample for the detection of Hg2+. The N,Cl-CQDs prepared in this study exhibited a reduced detection limit and a broad linear range by an easy, environmentally friendly, and rapid method for detecting GSH and Hg2+ ions.

Materials Nanoarchitectonics for Advanced Devices

Advances in nanotechnology have made it possible to observe and evaluate structures down to the atomic and molecular level. The next step in the development of functional materials is to apply the knowledge of nanotechnology to materials sciences. This is the role of nanoarchitectonics, which is a concept of post-nanotechnology. Nanoarchitectonics is defined as a methodology to create functional materials using nanounits such as atoms, molecules, and nanomaterials as building blocks. Nanoarchitectonics is very general and is not limited to materials or applications, and thus nanoarchitecture is applied in many fields. In particular, in the evolution from nanotechnology to nanoarchitecture, it is useful to consider the contribution of nanoarchitecture in device applications. There may be a solution to the widely recognized problem of integrating top-down and bottom-up approaches in the design of functional systems. With this in mind, this review discusses examples of nanoarchitectonics in developments of advanced devices. Some recent examples are introduced through broadly dividing them into organic molecular nanoarchitectonics and inorganic materials nanoarchitectonics. Examples of organic molecular nanoarchitecture include a variety of control structural elements, such as π-conjugated structures, chemical structures of complex ligands, steric hindrance effects, molecular stacking, isomerization and color changes due to external stimuli, selective control of redox reactions, and doping control of organic semiconductors by electron transfer reactions. Supramolecular chemical processes such as association and intercalation of organic molecules are also important in controlling device properties. The nanoarchitectonics of inorganic materials often allows for control of size, dimension, and shape, and their associated physical properties can also be controlled. In addition, there are specific groups of materials that are suitable for practical use, such as nanoparticles and graphene. Therefore, nanoarchitecture of inorganic materials also has a more practical aspect. Based on these aspects, this review finally considers the future of materials nanoarchitectonics for further advanced devices.

Lateral nanoarchitectonics from nano to life: ongoing challenges in interfacial chemical science

Lateral nanoarchitectonics is a method of precisely designing functional materials from atoms, molecules, and nanomaterials (so-called nanounits) in two-dimensional (2D) space using knowledge of nanotechnology. Similar strategies can be seen in biological systems; in particular, biological membranes ingeniously arrange and organise functional units within a single layer of units to create powerful systems for photosynthesis or signal transduction and others. When our major lateral nanoarchitectural approaches such as layer-by-layer (LbL) assembly and Langmuir-Blodgett (LB) films are compared with biological membranes, one finds that lateral nanoarchitectonics has potential to become a powerful tool for designing advanced functional nanoscale systems; however, it is still rather not well-developed with a great deal of unexplored possibilities. Based on such a discussion, this review article examines the current status of lateral nanoarchitectonics from the perspective of in-plane functional structure organisation at different scales. These include the extension of functions at the molecular level by on-surface synthesis, monolayers at the air-water interface, 2D molecular patterning, supramolecular polymers, macroscopic manipulation and functionality of molecular machines, among others. In many systems, we have found that while the targets are very attractive, the research is still in its infancy, and many challenges remain. Therefore, it is important to look at the big picture from different perspectives in such a comprehensive review. This review article will provide such an opportunity and help us set a direction for lateral nanotechnology toward more advanced functional organization.

Recent progress in carbon nanomaterials for highly flexible fibrous aqueous zinc-ion batteries

Fibrous zinc-ion batteries (FZIBs) are ideal wearable energy storage devices with unparalleled utility in the next generation of flexible electronics. However, the conventional electrode materials still present challenges to achieve both good electrochemical performance and mechanical deformability. This hinders their large-scale production and commercial application. Carbon nanomaterials exhibit a number of advantageous properties, including high chemical stability, high conductivity, low cost, and high mechanical flexibility. These characteristics make them an attractive option for modifying electrode materials. This review presents an overview of the latest research developments and practical applications of carbon nanomaterial-assisted FZIBs cathodes and anodes. It also identifies the key challenges currently limiting the performance of high-performance FZIBs and outlines potential future research directions.

Hemicellulose-Based Sensors: When Sustainability Meets Complexity

Hemicelluloses (HCs) are promising sustainable biopolymers with a great natural abundance, excellent biocompatibility, and biodegradability. Yet, their potential sensing applications remain limited due to intrinsic challenges in their heterogeneous chemical composition, structure, and physicochemical properties. Herein, recent advances in the development of HC-based sensors for different chemical analytes and physical stimuli using different transduction mechanisms are reviewed and discussed. HCs can be utilized as carbonaceous precursors, reducing, capping, and stabilizing agents, binders, and active components for sensing applications. In addition, different strategies to develop and improve the sensing capacity of HC-based sensors are also highlighted.

A proton-coupled electron transfer process from functionalized carbon dots to molecular substrates: the role of pH

Multiple electron and proton transfers in nanomaterials pose significant demands and challenges across the various fields such as renewable energy, chemical processes, biological applications, and photophysics. In this context, pH-responsive functional group-enriched carbon dots (C-Dots) emerge as superior proton-coupled electron transfer (PCET) agents owing to the presence of multiple functional groups (-COOH, -NH2, and -OH) on the surface and redox-active sites in the core. Here, we elucidate the 2e-/2H+ transfer ability of carboxyl-enriched C-Dots (C-Dot-COOH) and amine-enriched C-Dots (C-Dot-NH2) with molecular 2e-/2H+ acceptor (benzoquinone, BQ) as a function of pKa, facilitated by the formation of new O-H bonds. The ground state and excited state pKa values of different functional groups on the surface of C-Dots are determined using steady-state absorbance and photoluminescence (PL) spectroscopy. The optical spectroscopy and electrochemical studies are employed to comprehend the influence of the surface and core of C-Dots on the proton and electron transfer processes as a function of pH. The cyclic voltammetry analysis reveals a standard Nernstian shift in E1/2 per pH unit of 30 mV, indicating that the functionalized C-Dots hold promise as candidates for the 2e-/2H+ transfer process. The calculated bond dissociation free energy (BDFE) of the electroactive O-H/N-H bonds provides a more nuanced and detailed understanding of PCET thermodynamic landscapes. These findings underscore the potential of nanoscale functionalized C-Dots for facilitating multiple PCET reactions in future energy technologies.

Enhanced Electrochemical Detection of Nonelectroactive Compounds Based on Surface Supramolecular Interactions on Chevron-like Graphene Nanoribbons Modified through Click Chemistry

In this study, we have developed a nanostructured electrochemical sensor based on modified graphene nanoribbons tailored for the analysis of nonelectroactive compounds via a surface competitive assay. Stigmasterol, a nonelectroactive phytosterol, was selected as a representative case. Chevron-like graphene nanoribbons, chemically synthesized, were immobilized onto glassy carbon electrodes and covalently functionalized to allow the on-surface formation of a supramolecular complex. To this end, the nanoribbons were first modified through a diazotization process by electrochemical reduction of a 4-azidoaniline diazonium salt, leaving the electrode surface with azide groups exposed to solution. Next, the incorporation of a ferrocene group, as a redox probe, was carried out by a click chemistry reaction between ethynylferrocene and these azide groups. Finally, the recognition event leads to the formation of a supramolecular complex between ferrocene and a macrocyclic receptor on the electrode surface. To this end, the receptors cucurbit[7]uril, cucurbit[8]uril, and β-cyclodextrin were evaluated, with the better results obtained with β-cyclodextrin. Atomic force microscopy and scanning electron microscopy measurements were performed for the morphological characterization of the resulting electrochemical platform surface. The ability of β-cyclodextrin to form an inclusion complex with ferrocene or with stigmasterol allows to perform a competitive assay, which translates into the decrease and recovery of the ferrocene electrochemical signal. For stigmasterol determination, a linear concentration range between 200 and 750 μM and a detection limit of 60 μM were obtained, with relative errors and relative standard deviations less than 7.1 and 9.8%, respectively.

Controlled preparation of tannic acid-derived carbonized dots and their use to inhibit amyloid aggregation and promote aggregate disaggregation

Tannic acid (TA)-derived carbon dots (TACDs) were synthesized for the first time via a solvothermal method using TA as one of the raw materials, which may effectively inhibit amyloid fibril aggregation and disaggregate mature fibril. The fluorescent property of TACDs were modulated by adjusting the ratio of TA to o-phenylenediamine (oPD), and TACDs fabricated with the precursor ratio as 1:1 showed the best fluorescent property. Circular dichroism spectra (CD) showed that the structure of β-sheet decreased as the concentration of TACDs increased. The inhibition efficiency, as confirmed by thioflavin T (ThT) and transmission electron microscopy (TEM), is extraordinary at 98.16%, whereas disaggregation efficiency is noteworthy at 97.97%, and the disaggregated lysozyme fibrils did not reaggregate after 7 days. More critically, TACDs can also alleviate the cellular toxicity caused by Aβ fibrils and improve cell viability. This work offers a new perspective on the design of scavengers for amyloid plaques.

Metal-Doping Strategy for Carbon-Based Sonosensitizer in Sonodynamic Therapy of Glioblastoma

Glioblastoma multiforme (GBM) is the most common primary malignant brain tumor and known for its challenging prognosis. Sonodynamic therapy (SDT) is an innovative therapeutic approach that shows promise in tumor elimination by activating sonosensitizers with low-intensity ultrasound. In this study, a novel sonosensitizer is synthesized using Cu-doped carbon dots (Cu-CDs) for the sonodynamic treatment of GBM. Doping with copper transforms the carbon dots into a p-n type semiconductor having a bandgap of 1.58 eV, a prolonged lifespan of 10.7 µs, and an improved electron- and hole-separation efficiency. The sonodynamic effect is efficiency enhanced. Western blot analysis reveals that the Cu-CDs induces a biological response leading to cell death, termed as cuproptosis. Specifically, Cu-CDs upregulate dihydrosulfanyl transacetylase expression, thereby establishing a synergistic therapeutic effect against tumor cell death when combined with SDT. Furthermore, Cu-CDs exhibit excellent permeability through the blood-brain barrier and potent anti-tumor activity. Importantly, the Cu-CDs effectively impede the growth of glioblastoma tumors and prolong the survival of mice bearing these tumors. This study provides support for the application of carbon-based nanomaterials as sonosensitizers in tumor therapy.

A review of biocompatible polymer-functionalized two-dimensional materials: Emerging contenders for biosensors and bioelectronics applications

Bioelectronics, a field pivotal in monitoring and stimulating biological processes, demands innovative nanomaterials as detection platforms. Two-dimensional (2D) materials, with their thin structures and exceptional physicochemical properties, have emerged as critical substances in this research. However, these materials face challenges in biomedical applications due to issues related to their biological compatibility, adaptability, functionality, and nano-bio surface characteristics. This review examines surface modifications using covalent and non-covalent-based polymer-functionalization strategies to overcome these limitations by enhancing the biological compatibility, adaptability, and functionality of 2D nanomaterials. These surface modifications aim to create stable and long-lasting therapeutic effects, significantly paving the way for the practical application of polymer-functionalized 2D materials in biosensors and bioelectronics. The review paper critically summarizes the surface functionalization of 2D nanomaterials with biocompatible polymers, including g-C3N4, graphene family, MXene, BP, MOF, and TMDCs, highlighting their current state, physicochemical structures, synthesis methods, material characteristics, and applications in biosensors and bioelectronics. The paper concludes with a discussion of prospects, challenges, and numerous opportunities in the evolving field of bioelectronics.

The Emerging Star of Carbon Luminescent Materials: Exploring the Mysteries of the Nanolight of Carbon Dots for Optoelectronic Applications

Carbon dots (CDs), a class of carbon-based nanomaterials with dimensions less than 10 nm, have attracted significant interest since their discovery. They possess numerous excellent properties, such as tunability of photoluminescence, environmental friendliness, low cost, and multifunctional applications. Recently, a large number of reviews have emerged that provide overviews of their synthesis, properties, applications, and their composite functionalization. The application of CDs in the field of optoelectronics has also seen unprecedented development due to their excellent optical properties, but reviews of them in this field are relatively rare. With the idea of deepening and broadening the understanding of the applications of CDs in the field of optoelectronics, this review for the first time provides a detailed summary of their applications in the field of luminescent solar concentrators (LSCs), light-emitting diodes (LEDs), solar cells, and photodetectors. In addition, the definition, categories, and synthesis methods of CDs are briefly introduced. It is hoped that this review can bring scholars more and deeper understanding in the field of optoelectronic applications of CDs to further promote the practical applications of CDs.

Liquid-Liquid and Liquid-Solid Interfacial Nanoarchitectonics

Nanoscale science is becoming increasingly important and prominent, and further development will necessitate integration with other material chemistries. In other words, it involves the construction of a methodology to build up materials based on nanoscale knowledge. This is also the beginning of the concept of post-nanotechnology. This role belongs to nanoarchitectonics, which has been rapidly developing in recent years. However, the scope of application of nanoarchitectonics is wide, and it is somewhat difficult to compile everything. Therefore, this review article will introduce the concepts of liquid and interface, which are the keywords for the organization of functional material systems in biological systems. The target interfaces are liquid-liquid interface, liquid-solid interface, and so on. Recent examples are summarized under the categories of molecular assembly, metal-organic framework and covalent organic framework, and living cell. In addition, the latest research on the liquid interfacial nanoarchitectonics of organic semiconductor film is also discussed. The final conclusive section summarizes these features and discusses the necessary components for the development of liquid interfacial nanoarchitectonics.

A new fabricated hetero-atom doped carbon quantum dots as a fluorescent probe for metronidazole determination using garlic and red lentils with microwave assistance

Biocompatible and highly fluorescent phosphorus, nitrogen and sulfur carbon quantum dots (P,N,S-CQDs) were synthesized using a quick and ecologically friendly process inspired from plant sources. Garlic and red lentils were utilized as natural and inexpensive sources for efficient synthesis of the carbon-based quantum dots using green microwave-irradiation, which provides an ultrafast route for carbonization of the organic biomass and subsequent fabrication of P,N,S-CQDs within only 3 min. The formed P,N,S-CQDs showed excellent blue fluorescence at λem = 412 nm when excited at 325 nm with a quantum yield up to 26.4%. These fluorescent dots were used as a nano-sensor for the determination of the commonly used antibacterial and antiprotozoal drug, metronidazole (MTR). As MTR lacked native fluorescence and prior published techniques had several limitations, the proposed methodology became increasingly relevant. This approach affords sensitive detection with a wide linear range of 0.5-100.0 μM and LOD and LOQ values of 0.14 μM and 0.42 μM, respectively. As well as, it is cost-effective and ecologically benign. The MTT test was used to evaluate the in-vitro cytotoxicity of the fabricated P,N,S-CQDs. The findings supported a minimally cytotoxic impact and good biocompatibility, which provide a future perspective for the applicability of these CQDs in biomedical applications.

Recent advances in food waste-derived nanoporous carbon for energy storage

Affordable and environmentally friendly electrochemically active raw energy storage materials are in high demand to switch to mass-scale renewable energy. One particularly promising avenue is the feasibility of utilizing food waste-derived nanoporous carbon. This material holds significance due to its widespread availability, affordability, ease of processing, and, notably, its cost-free nature. Over the years, various strategies have been developed to convert different food wastes into nanoporous carbon materials with enhanced electrochemical properties. The electrochemical performance of these materials is influenced by both intrinsic factors, such as the composition of elements derived from the original food sources and recipes, and extrinsic factors, including the conditions during pyrolysis and activation. While current efforts are dedicated to optimizing process parameters to achieve superior performance in electrochemical energy storage devices, it is timely to take stock of the current state of research in this emerging field. This review provides a comprehensive overview of recent developments in the fabrication and surface characterisation of porous carbons from different food wastes. A special focus is given on the applications of these food waste derived porous carbons for energy storage applications including batteries and supercapacitors.

The Guidelines for the Design and Synthesis of Transition Metal Atom Doped Carbon Dots

Atoms doping is a practical approach to modulate the physicochemical properties of carbon dots (CDs) and thus has garnered increasing attention in recent years. Compared to non-metal atoms, transition metal atoms (TMAs) possess more unoccupied orbitals and larger atomic radii. TMAs doping can significantly alter the electronic structure of CDs and bestow them with new intrinsic characteristics. TMAs-doped CDs have exhibited widespread application potential as a new class of single-atom-based nanomaterials. However, challenges remain for the successful preparation and precise design of TMAs-doped CDs. The key to successfully preparing TMA-doped CDs lies in anchoring TMAs to the carbon precursors before the reaction. Herein, taking the formation mechanism of TMAs-doped CDs as a starting point, we systematically summarized the ligands employed for synthesizing TMAs-doped CDs and proposed the synthetic strategy involving multiple ligands. Additionally, we summarize the functional properties imparted to CDs by different TMA dopants to guide the design of TMA-doped CDs with different functional characteristics. Finally, we describe the bottlenecks TMAs-doped CDs face and provide an outlook on their future development.

Layer-by-layer designer nanoarchitectonics for physical and chemical communications in functional materials

Nanoarchitectonics, as a post-nanotechnology concept, constructs functional materials and structures using nanounits of atoms, molecules, and nanomaterials as materials. With the concept of nanoarchitectonics, asymmetric structures, and hierarchical organization, rather than mere assembly and organization of structures, can be produced, where rational physical and chemical communications will lead to the development of more advanced functional materials. Layer-by-layer assembly can be a powerful tool for this purpose, as exemplified in this feature paper. This feature article explores the possibility of constructing advanced functional systems based on recent examples of layer-by-layer assembly. We will illustrate both the development of more basic methods and more advanced nanoarchitectonics systems aiming towards practical applications. Specifically, the following sections will provide examples of (i) advancement in basics and methods, (ii) physico-chemical aspects and applications, (iii) bio-chemical aspects and applications, and (iv) bio-medical applications. It can be concluded that materials nanoarchitectonics based on layer-by-layer assembly is a useful method for assembling asymmetric structures and hierarchical organization, and is a powerful technique for developing functions through physical and chemical communication.

Confined Space Nanoarchitectonics for Dynamic Functions and Molecular Machines

Nanotechnology has advanced the techniques for elucidating phenomena at the atomic, molecular, and nano-level. As a post nanotechnology concept, nanoarchitectonics has emerged to create functional materials from unit structures. Consider the material function when nanoarchitectonics enables the design of materials whose internal structure is controlled at the nanometer level. Material function is determined by two elements. These are the functional unit that forms the core of the function and the environment (matrix) that surrounds it. This review paper discusses the nanoarchitectonics of confined space, which is a field for controlling functional materials and molecular machines. The first few sections introduce some of the various dynamic functions in confined spaces, considering molecular space, materials space, and biospace. In the latter two sections, examples of research on the behavior of molecular machines, such as molecular motors, in confined spaces are discussed. In particular, surface space and internal nanospace are taken up as typical examples of confined space. What these examples show is that not only the central functional unit, but also the surrounding spatial configuration is necessary for higher functional expression. Nanoarchitectonics will play important roles in the architecture of such a total system.

2D Materials Nanoarchitectonics for 3D Structures/Functions

It has become clear that superior material functions are derived from precisely controlled nanostructures. This has been greatly accelerated by the development of nanotechnology. The next step is to assemble materials with knowledge of their nano-level structures. This task is assigned to the post-nanotechnology concept of nanoarchitectonics. However, nanoarchitectonics, which creates intricate three-dimensional functional structures, is not always easy. Two-dimensional nanoarchitectonics based on reactions and arrangements at the surface may be an easier target to tackle. A better methodology would be to define a two-dimensional structure and then develop it into a three-dimensional structure and function. According to these backgrounds, this review paper is organized as follows. The introduction is followed by a summary of the three issues; (i) 2D to 3D dynamic structure control: liquid crystal commanded by the surface, (ii) 2D to 3D rational construction: a metal-organic framework (MOF) and a covalent organic framework (COF); (iii) 2D to 3D functional amplification: cells regulated by the surface. In addition, this review summarizes the important aspects of the ultimate three-dimensional nanoarchitectonics as a perspective. The goal of this paper is to establish an integrated concept of functional material creation by reconsidering various reported cases from the viewpoint of nanoarchitectonics, where nanoarchitectonics can be regarded as a method for everything in materials science.

Rational Design of Full-Color Fluorescent C3N Quantum Dots

Carbon-based quantum dots (QDs) exhibit unique photoluminescence due to size-dependent quantum confinement, giving rise to fascinating full-color emission properties. Accurate emission calculations using time-dependent density functional theory are a time-costing and expensive process. Herein, we employed an artificial neural network (ANN) combined with statistical learning to establish the relationship between geometrical/electronic structures of ground states and emission wavelength for C3N QDs. The emission energy of these QDs can be doubly modulated by size and edge effects, which are governed by the number of C4N2 rings and the CH group, respectively. Moreover, these two structural characteristics also determine the phonon vibration mode of C3N QDs to harmonize the emission intensity and lifetime of hot electrons in the electron-hole recombination process, as indicated by nonadiabatic molecular dynamics simulation. These computational results provide a general approach to atomically precise design the full-color fluorescent carbon-based QDs with targeted functions and high performance.

A review of nanomaterials for biosensing applications

A biosensor is a device that reacts with the analyte to be analyzed, detects its concentration, and generates readable information, which plays an important role in medical diagnosis, detection of physiological indicators, and disease prevention. Nanomaterials have received increasing attention in the fabrication and improvement of biosensors due to their unique physicochemical and optical properties. In this paper, the properties of nanomaterials such as the size effect, optical and electrical properties, and their advantages in the field of biosensing are briefly summarized, and the application of nanomaterials can effectively improve the sensitivity and reduce the detection limit of biosensors. The advantages of commonly used nanomaterials such as gold nanoparticles (AuNPs), carbon nanotubes (CNTs), quantum dots (QDs), graphene, and magnetic nanobeads for biosensor applications are also reviewed. Besides, the two main types of biosensors using nanomaterials involved in their construction and their working principles are described, and the toxicity and biocompatibility of nanomaterials and the future direction of nanomaterial biosensors are discussed.

Bridging Together Theoretical and Experimental Perspectives in Single-Atom Alloys for Electrochemical Ammonia Production

Ammonia is an essential commodity in the food and chemical industry. Despite the energy-intensive nature, the Haber-Bosch process is the only player in ammonia production at large scales. Developing other strategies is highly desirable, as sustainable and decentralized ammonia production is crucial. Electrochemical ammonia production by directly reducing nitrogen and nitrogen-based moieties powered by renewable energy sources holds great potential. However, low ammonia production and selectivity rates hamper its utilization as a large-scale ammonia production process. Creating effective and selective catalysts for the electrochemical generation of ammonia is critical for long-term nitrogen fixation. Single-atom alloys (SAAs) have become a new class of materials with distinctive features that may be able to solve some of the problems with conventional heterogeneous catalysts. The design and optimization of SAAs for electrochemical ammonia generation have recently been significantly advanced. This comprehensive review discusses these advancements from theoretical and experimental research perspectives, offering a fundamental understanding of the development of SAAs for ammonia production.

Materials Nanoarchitectonics at Dynamic Interfaces: Structure Formation and Functional Manipulation

The next step in nanotechnology is to establish a methodology to assemble new functional materials based on the knowledge of nanotechnology. This task is undertaken by nanoarchitectonics. In nanoarchitectonics, we architect functional material systems from nanounits such as atoms, molecules, and nanomaterials. In terms of the hierarchy of the structure and the harmonization of the function, the material created by nanoarchitectonics has similar characteristics to the organization of the functional structure in biosystems. Looking at actual biofunctional systems, dynamic properties and interfacial environments are key. In other words, nanoarchitectonics at dynamic interfaces is important for the production of bio-like highly functional materials systems. In this review paper, nanoarchitectonics at dynamic interfaces will be discussed, looking at recent typical examples. In particular, the basic topics of "molecular manipulation, arrangement, and assembly" and "material production" will be discussed in the first two sections. Then, in the following section, "fullerene assembly: from zero-dimensional unit to advanced materials", we will discuss how various functional structures can be created from the very basic nanounit, the fullerene. The above examples demonstrate the versatile possibilities of architectonics at dynamic interfaces. In the last section, these tendencies will be summarized, and future directions will be discussed.

Assembling all-wood-derived carbon/carbon dots-assisted phase change materials for high-efficiency thermal-energy harvesters

The collection and storage of renewable, sustainable and clean energy including wind, solar, and tidal energy has attracted considerable attention because of its promising potential to replace fossil energy sources. Advanced energy-storage materials are the core component for energy harvesters, affording the high-efficiency conversion of these new-style energy sources. Herein, originated from nature, a series of all-wood-derived carbon-assisted phase change materials (PCMs) were purposed by incorporating carbon dots-modified polyethylene glycol matrix into carbon skeletons via a vacuum-impregnation strategy. The resultant PCMs possessed desired anti-leakage capability and superior thermophysical behaviors. In particular, the optimum sample posed high latent heat (131.5 J/g) and well thermal stability, where the corresponding enthalpy still reserved 90 % over 100 heating/cooling cycles. More importantly, the as-fabricated thermal-energy harvester presented prominent capability to strorage and release multiple forms of thermal energy, as well as high-efficiency solar-energy utilization, corresponding to a photothermal conversion efficiency of 88 % in simulated sunlight irradiation, far exceeding some reported PCMs. Overall, with the introduction of wood-derived carbon dots and carbon skeletons, the assembled all-wood-derived carbon-assisted PCMs afforded trinity advantages on thermal performance, cycling stability, and energy conversion efficiency, which provide a promising potential for the practical application in thermal-energy harvesters.

Coffee grounds-derived carbon quantum dots as peroxidase mimetics for colorimetric and fluorometric detection of ascorbic acid

In this study, we reported the eco-responsible synthesis of iron-doped carbon quantum dots (Fe-CQDs) from waste coffee grounds through a simple hydrothermal method. The Fe-CQDs exhibited high peroxidase-like activity, which could convert 3,3',5,5'-tetramethylbenzidine (TMB) into blue ox-TMB in the presence of H2O2. After adding ascorbic acid (AA) to above system, the blue solution faded. Based on this phenomenon, a colorimetric method for visual monitoring of H2O2 and AA was developed. Meanwhile, the fluorescence of Fe-CQDs can be quenched by the formed ox-TMB via inner filter effect (IFE), followed by the recovery upon the addition of AA. Therefore, Fe-CQDs can be acted as a fluorescent probe to detect H2O2 and AA through the "on-off-on" mode. Furthermore, the dual-recognition methods based on Fe-CQDs were used to measure AA content in beverage samples. Thus, this work would shed much light on converting waste into biomass CQDs and their potential applications in biomolecular detection.

Multifunctional carbon nitride nanoarchitectures for catalysis

Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.

Strategies for Improving the Photocatalytic Hydrogen Evolution Reaction of Carbon Nitride-Based Catalysts

Due to the depletion of fossil fuels and their-related environmental issues, sustainable, clean, and renewable energy is urgently needed to replace fossil fuel as the primary energy resource. Hydrogen is considered as one of the cleanest energies. Among the approaches to hydrogen production, photocatalysis is the most sustainable and renewable solar energy technique. Considering the low cost of fabrication, earth abundance, appropriate bandgap, and high performance, carbon nitride has attracted extensive attention as the catalyst for photocatalytic hydrogen production in the last two decades. In this review, the carbon nitride-based photocatalytic hydrogen production system, including the catalytic mechanism and the strategies for improving the photocatalytic performance is discussed. According to the photocatalytic processes, the strengthened mechanism of carbon nitride-based catalysts is particularly described in terms of boosting the excitation of electrons and holes, suppressing carriers recombination, and enhancing the utilization efficiency of photon-excited electron-hole. Finally, the current trends related to the screening design of superior photocatalytic hydrogen production systems are outlined, and the development direction of carbon nitride for hydrogen production is clarified.

Fabricating carbon quantum dots of graphitic carbon nitride vis ultrasonic exfoliation for highly efficient H2O2 production

A promising and sustainable approach for producing hydrogen peroxide is the two-electron oxygen reduction reaction (2e- ORR), which uses very stable graphitic carbon nitride (g-C3N4). However, the catalytic performance of pristine g-C3N4 is still far from satisfactory. Here, we demonstrate for the first time the controlled fabrication of carbon quantum dots (CQDs)-modified graphitic carbon nitride carbon (g-C3N4/CQDs-X) by ultrasonic stripping for efficient 2e- ORR electrocatalysis. HRTEM, UV-vis, EPR and EIS analyses are in good consistent which prove the in-situ generation of CQDs. The effect of sonication time on the physical properties and ORR activity of g-C3N4 is discussed for the first time. The g-C3N4/CQDs-12 catalyst shows a selectivity of up to 95% at a potential of 0.35 V vs. RHE, which is much higher than that of the original g-C3N4 catalyst (88%). Additionally, the H2O2 yield is up to 1466.6 mmol g-1 in 12 h, which is twice as high as the original g-C3N4 catalyst. It is discovered that the addition of CQDs through ultrasonic improves the g-C3N4 catalyst's electrical conductivity and electron transfer capability in addition to its high specific surface area and distinctive porous structure, speeding up the reaction rate. This research offers a green method for enhancing g-C3N4 activity.

Synthesis of Sulfur@g-C3N4 and CuS@g-C3N4 Catalysts for Hydrogen Production from Sodium Borohydride

In this work, the S@g-C₃N₄ and CuS@g-C₃N₄ catalysts were prepared via the polycondensation process. The structural properties of these samples were completed on XRD, FTIR and ESEM techniques. The XRD pattern of S@g-C₃N₄ presents a sharp peak at 27.2° and a weak peak at 13.01° and the reflections of CuS belong to the hexagonal phase. The interplanar distance decreased from 0.328 to 0.319 nm that facilitate charge carrier separation and promoting H₂ generation. FTIR data revealed the structural change according to absorption bands of g-C₃N₄. ESEM images of S@g-C₃N₄ exhibited the described layered sheet structure for g-C₃N₄ materials and CuS@g-C₃N₄ demonstrated that the sheet materials were fragmented throughout the growth process. The data of BET revealed a higher surface area (55 m²/g) for the CuS-g-C₃N₄ nanosheet. The UV-vis absorption spectrum of S@g-C₃N₄ showed a strong peak at 322 nm, which weakened after the growth of CuS at g-C₃N₄. The PL emission data showed a peak at 441 nm, which correlated with electron-hole pair recombination. The data of hydrogen evolution showed improved performance for the CuS@g-C₃N₄ catalyst (5227 mL/g·min). Moreover, the activation energy was determined for S@g-C₃N₄ and CuS@g-C₃N₄, which showed a lowering from 47.33 ± 0.02 to 41.15 ± 0.02 KJ/mol.

Recent Advances in Carbon-Based Electrodes for Energy Storage and Conversion

Carbon-based nanomaterials, including graphene, fullerenes, and carbon nanotubes, are attracting significant attention as promising materials for next-generation energy storage and conversion applications. They possess unique physicochemical properties, such as structural stability and flexibility, high porosity, and tunable physicochemical features, which render them well suited in these hot research fields. Technological advances at atomic and electronic levels are crucial for developing more efficient and durable devices. This comprehensive review provides a state-of-the-art overview of these advanced carbon-based nanomaterials for various energy storage and conversion applications, focusing on supercapacitors, lithium as well as sodium-ion batteries, and hydrogen evolution reactions. Particular emphasis is placed on the strategies employed to enhance performance through nonmetallic elemental doping of N, B, S, and P in either individual doping or codoping, as well as structural modifications such as the creation of defect sites, edge functionalization, and inter-layer distance manipulation, aiming to provide the general guidelines for designing these devices by the above approaches to achieve optimal performance. Furthermore, this review delves into the challenges and future prospects for the advancement of carbon-based electrodes in energy storage and conversion.