Hierarchically Assembling CoFe Prussian Blue Analogue Nanocubes on CoP Nanosheets as Highly Efficient Electrocatalysts for Overall Water Splitting

Fe-Co-Fe prussian blue analogues loaded nitrogen doped carbon quantum dots for effective epinephrine detection

Epinephrine (Ep) is an important neurotransmitter, which plays an important role in the nervous system and glycogen metabolism of living organisms. Hence, a novel NCQDs/FeCoFe-PBA composite with FeCoFe-Prussian blue analogues (PBA) as the core and nitrogen-doped carbon quantum dots (NCQDs) as the shell was constructed by a one-pot hydrothermal method, and it was used for the efficient detection of Ep. As a good electroactive material, NCQDs in the composite not only improved the weak conductivity of FeCoFe-PBA, but also limited the self-aggregation of FeCoFe-PBA, and formed a uniform shell on FeCoFe-PBA. The heterogeneous structure formed between the core and shell layer resulting in NCQDs/FeCoFe-PBA nanocomposites with more active sites, electron transport channels and a larger effective surface area. Further, under optimal conditions, the electrochemical method was used to evaluate the NCQDs/FeCoFe-PBA sensor, and the results revealed that the sensor had exceptional sensing performance for Ep, with an excellent linear range from 0.01 to 306.7 μM and a low detection limit of 0.002 μM. Simultaneously, the practicality, repeatability, and stability tests yielded positive results, confirming the feasibility of practical development and application of NCQDs/FeCoFe-PBA.

Enhanced Water Splitting Electrocatalysis with Heterointerfacial Cobalt Phosphide In Situ Supported on a Cellulose-Derived Carbon Aerogel

The active site density, intrinsic activity, and supporting substrate of cobalt phosphide catalysts are vital to their performance in alkaline water electrolysis. In this work, a CoP/Co2P loaded on cellulose nanofiber-derived carbon aerogels (CP/CCAs) bifunctional electrocatalyst with a three-dimensional network and heterostructure is illustrated through sequential facile hydrothermal, freeze-drying, and phosphorylation processes. The three-dimensional network of carbon aerogels derived from cellulose nanofibers reveals a specific surface area of 183.41 m2/g, greatly enriching the active sites and facilitating the electron and mass transportation. Besides, interactions between CoP/Co2P with a heterogeneous structure and carbon aerogels modulate the electronic structure to enhance the intrinsic activity of the catalysts. Benefiting from these advantages, CP/CCAs-2 demonstrates a superior oxygen evolution reaction activity (η10 mA cm-2 = 277 mV) over the benchmark RuO2 and a moderate hydrogen evolution reaction performance (η10 mA cm-2 = 63 mV). Density functional theory calculations further reveal that the coupling of CoP/Co2P and cellulose-derived carbon aerogels promotes the water adsorption and activates the H-O bond. As a result, the alkaline electrolyzer assembled with CP/CCAs-2 both as a cathode and an anode shows a low cell voltage of 1.59 V at a current density of 10 mA cm-2 and good stability. This work provides a strategy for phosphide electrocatalysts composited with green carbon carriers for overall water splitting.

Manganese-Doped Bimetallic (Co,Ni)2P Integrated CoP in N,S Co-Doped Carbon: Unveiling a Compatible Hybrid Electrocatalyst for Overall Water Splitting

Rational design of highly efficient noble-metal-unbound electrodes for hydrogen and oxygen production at increased current density is crucial for robust water-splitting. A facile hydrothermal and room-temperature aging method is presented, followed by chemical vapor deposition (CVD), to create a self-sacrificed hybrid heterostructure electrocatalyst. This hybrid material, (Mn-(Co,Ni)2P/CoP/(N,S)-C), comprises manganese-doped cobalt nickel phosphide (Mn-(Co,Ni)2P) nanofeathers and cobalt phosphide (CoP) nanocubes embedded in a nitrogen and sulfur co-doped carbon matrix (N,S)-C on nickel foam. The catalyst exhibits excellent performance in both the hydrogen evolution reaction (HER; η10 = 61 mV) and oxygen evolution reaction (OER; η10 = 213 mV) due to abundant active sites, high porosity, and enhanced hetero-interface interaction between Mn-(Co2P-Ni2P) CoP, and (N,S)-C supported by significant synergistic effects observed among different phases through density functional theory (DFT) calculations. Impressively, (Mn-(Co,Ni)2P/CoP/(N,S)-C (+,-) shows an extra low cell voltage of 1.49 V@10 mA cm-2. Moreover, the catalyst exhibits remarkable stability at 100 and 300 mA cm-2 when operating as a single stack cell electrolyzer. The superior electrochemical activity is attributed to the enhanced electrode-electrolyte interface among the multiple phases of the hybrid structure.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

In situ growth engineering of ultrathin dendritic PdNi nanosheets on nitrogen-doped V2CTx MXenes for efficient hydrogen evolution

Immobilizing metal nanoparticles on a support is crucial for catalysts' stability and spatial distribution. MXenes are promising substrates for in situ growth engineering of various electrocatalysts owing to their merits. A stronger binding capacity can be achieved between the in situ-fabricated catalysts and MXenes compared to a common physical combination. Thus, synergistically utilizing morphology modulation, composition optimization, and the interfacial interaction between metal catalysts and supports will maximize the electrocatalytic activity. However, most reported in situ-formed catalysts on MXenes result in solid 0D nanoparticles and in situ growth of nanoalloy catalysts on MXenes with a precisely controlled morphology is still lacking. Herein, nanodendritic PdNi alloys are in situ grown on nitrogen-doped V2CTx, serving as efficient electrocatalysts toward the hydrogen evolution reaction (HER). Thanks to the synergistic effect of the unique nanodendritic structure of PdNi, the merits of N-TBA-V2CTx nanosheets, and the strong metal-support interaction between the PdNi and the N-TBA-V2CTx support, the in situ-formed Pd58Ni42/N-TBA-V2CTx electrocatalyst shows excellent HER performance with an ultralow overpotential of 44.1 mV to achieve 10 mA cm-2 and a lowest Tafel slope of 39.4 mV dec-1, which outperforms Pd58Ni42/TBA-V2CTx, Pd58Ni42, and Pd/C. Remarkably, the Pd58Ni42/N-TBA-V2CTx catalyst can maintain 92.3% of its initial activity even after 50 h of continuous operation.

MnOxHy-modified CoMoP/NF nanosheet arrays as hydrogen evolution reaction and oxygen evolution reaction bifunctional catalysts under alkaline conditions

It is widely acknowledged that interface engineering strategies can significantly enhance the activity of catalysts. In this study, we developed a CoMoP nanoarray directly grown in situ on a nickel foam (NF) substrate, with the interface structure formed through the electrodeposition of MnOxHy. The resulting heterostructure MnOxHy/CoMoP/NF exhibited remarkable hydrogen evolution reaction (HER) activity, achieving overpotentials as low as 61 and 138 mV at 10 and 100 mA cm-2, respectively. Moreover, MnOxHy/CoMoP/NF demonstrated efficient oxygen evolution reaction (OER) activity with an overpotential of 330 mV at 100 mA cm-2. Remarkably, MnOxHy/CoMoP/NF maintained its catalytic properties and structural integrity even after working continuously for 20 h facilitating the HER at 10 mA cm-2 and the OER at 100 mA cm-2. The Tafel slopes of the HER and OER were determined to be as small as 14 and 55 mV dec-1, respectively, confirming that the coupled interface conferred fast reaction kinetics on the catalyst. When applied in overall water splitting, MnOxHy/CoMoP/NF delivered a voltage of 1.91 V at 100 mA cm-2 with excellent stability. This study demonstrated the feasibility of utilizing a simple electrodeposition technique to fabricate a heterogeneous structure with bifunctional catalytic activity, establishing a solid foundation for diverse industrial applications.

Hierarchical Heterogeneous NiFe Layered Double Hydroxides for Efficient Solar-Powered Water Oxidation

Highly active, stable, and low-cost oxygen evolution reaction (OER) electrocatalysts are urgently needed for the realization of large-scale industrial hydrogen production via water electrolysis. Layered double hydroxides (LDHs) stand out as one of the most promising nonprecious electrocatalysts worth pursuing. Here, a hierarchical heterogeneous Ni2+Fe3+@Ni2+Fe2+ LDH was successfully synthesized via a sequential electrodeposition technique using separate electrolytes containing iron precursors with different valence states (Fe2+, Fe3+). The underlying highly crystalline Ni2+Fe2+ LDH nanosheet array provides a large surface for the catalytically more active Ni2+Fe3+ LDH overlayer with low crystallinity. The resulting Ni2+Fe3+@Ni2+Fe2+ LDH demonstrates excellent OER activity with overpotentials of 218 and 265 mV to reach current densities of 10 and 100 mA cm-2, respectively, as well as good long-term stability for 30 h even at a high current density of 500 mA cm-2. In an overall water splitting, an electrolyzer using an electrocatalyst of Sn4P3/CoP2 as a cathode requires only a cell voltage of 1.55 V at 10 mA cm-2. Furthermore, the solar-powered overall water splitting system consisting of our electrolyzer and a perovskite/Si tandem solar cell exhibits a high solar-to-hydrogen conversion efficiency of 15.3%.

One-step fabrication of vanadium-doped CoFe PBA nanosheets for efficient oxygen evolution reaction

Finding effective and affordable non-noble metal catalysts is one of the most important yet difficult tasks because of the sluggish kinetics of the oxygen evolution reaction (OER). Therefore, we synthesized vanadium-doped CoFe PBA nanosheets on nickel foam in a single step to change the electronic structure with metal doping. The sheet structure facilitates charge transfer, while vanadium doping modifies the electronic structure to enhance the catalytic activity. With just a 229 mV overpotential needed in the OER reaction to reach 10 mA cm-2, the as-synthesised electrocatalyst demonstrates high electrocatalytic activity. The produced electrocatalyst can operate at a current density of 10 mA cm-2 for 12 h, and it displays outstanding stability even at a high OER current density of 100 mA cm-2 for 12 h. This study will contribute to the development of efficient and affordable non-noble metal-based electrocatalysts.

Heterostructured CoFeP/CoP as an Electrocatalyst for Hydrogen Evolution in Alkaline Media

Developing highly efficient and persistent transition-metal-phosphide (TMP)-based electrocatalysts is critical for the hydrogen evolution reaction (HER) via water splitting in alkaline media. Herein, we constructed a unique heterostructured CoFeP/CoP grown on a nickle foam (NF) via hydrothermal and dipping methods followed by phosphorization at different temperatures for HER. The experimental results exhibit that the HER activity of CoFeP/CoP-400 is accelerated after the construction of heterostructures. The unique heterostructure provides plentiful active sites and a large surface area, which are beneficial for HER in 1.0 M KOH. CoFeP/CoP-400 displays a small overpotential of 78 mV at a current density of 10 mA cm^-2 and a smaller Tafel slope of 55.5 mV dec^-1. Moreover, CoFeP/CoP-400 shows excellent stability with a long-term operating time of 12 h. This work provides an effective method for the construction of TMPs with heterostructures for promoting energy conversion.

Engineering the Coordination Interface of Isolated Co Atomic Sites Anchored on N-Doped Carbon for Effective Hydrogen Evolution Reaction

The regulation of the coordination environment of the central metal atom is considered as an alternative way to enhance the performance of single-atom catalysts (SACs). Herein, we design an electrocatalyst with active sites of isolated Co atoms coordinated with four sulfur atoms supported on N-doped carbon frameworks (Co₁-S₄/NC), confirmed by high-angle annular dark-field scanning transmission electron microscope (HADDF-STEM) and synchrotron-radiation-based X-ray absorption fine structure (XAFS) spectroscopy. The Co₁-S₄/NC possesses higher hydrogen evolution reaction (HER) catalytic activity than other Co species and exceptional stability, which exhibits a small Tafel slope of 60 mV dec^-1 and a low overpotential of 114 mV at 10 mA cm^-2 during the HER in 0.5 M H₂SO₄ solution. Furthermore, through in situ X-ray absorption spectrum tests and density functional theory (DFT) calculations, we reveal the catalytic mechanism of Co₁-S₄ moieties and find that the increasing number of sulfur atoms in the Co coordination environment leads to a substantial reduction of the theoretical HER overpotential. This work may point a new direction for the synthesis, performance regulation, and practical application of single-metal-atom catalysts.

Phase-Controlled Synthesis of Nickel-Iron Nitride Nanocrystals Armored with Amorphous N-Doped Carbon Nanoparticles Nanocubes for Enhanced Overall Water Splitting

Transition metal nitrides (TMNs) nanostructures possess distinctive electronic, optical, and catalytic properties, showing great promise to apply in clean energy, optoelectronics, and catalysis fields. Nonetheless, phase-regulation of NiFe-bimetallic nitrides nanocrystals or nanohybrid architectures confronts challenges and their electrocatalytic overall water splitting (OWS) performances are underexplored. Herein, novel pure-phase Ni_{2+ x} Fe_{2- x} N nanocrystals armored with amorphous N-doped carbon (NC) nanoparticles nanocubes (NPNCs) are obtained by controllable nitridation of NiFe-Prussian-blue analogues derived oxides/NC NPNCs under Ar/NH₃ atmosphere. Such Ni_{2+ x} Fe_{2- x} N/NC NPNCs possess mesoporous structures and show enhanced electrocatalytic activity in 1 m KOH electrolyte with the overpotential of 101 and 270 mV to attain 10 and 50 mA cm^-2 current toward hydrogen and oxygen evolution reactions, outperforming their counterparts (mixed-phase NiFe₂ O₄ /Ni₃ FeN/NC and NiFe oxides/NC NPNCs). Remarkably, utilizing them as bifunctional catalysts, the assembled Ni_{2+ x} Fe_{2- x} N/NC||Ni_{2+ x} Fe_{2- x} N/NC electrolyzer only needs 1.51 V cell voltage for driving OWS to approach 10 mA cm^-2 water-splitting current, exceeding their counterparts and the-state-of-art reported bifunctional catalysts-based devices, and Pt/C||IrO₂ couples. Additionally, the Ni_{2+ x} Fe_{2- x} N/NC||Ni_{2+ x} Fe_{2- x} N/NC manifests excellent durability for OWS. The findings presented here may spur the development of advanced TMNs nanostructures by combining phase, structure engineering, and hybridization strategies and stimulate their applications toward OWS or other clean energy fields.

Paired Electrolysis of Acrylonitrile and 5-Hydroxymethylfurfural for Simultaneous Generation of Adiponitrile and 2,5-Furandicarboxylic Acid

The classic acrylonitrile (AN) electrohydrodimerization (EHD) to adiponitrile (ADN) process produces oxygen on the anode side. The oxygen evolution reaction (OER) is energy consuming, and O2 is of low value and has security issues while directly contacting with organic molecules. Herein, by replacing OER with 5-hydroxymethylfurfural oxidation reaction (HMFOR), we report paired electrolysis of AN and HMF for simultaneous generation of ADN and 2,5-furandicarboxylic acid (FDCA). On the anode side, the electrodeposited amorphous NiMoP film-covered nickel foam efficiently boosted HMFOR activity by enlarging the electrochemically active surface area (ECSA) via in situ selective removal of Mo and P on the surface. On the cathode side, addition of dimethylformamide (DMF) as a cosolvent enhanced the reaction efficiency of ANEHD by forming a single-phase electrolyte that offers better interaction between AN and the electrode. The ANEHD–HMFOR paired system shows excellent generation rates of FDCA (0.018 gFDCA·h−1·cm−2) and ADN (0.017 gADN·h−1·cm−2) at a high cell current (160 mA). An amount of 1 kWh of electricity can produce 2.91 mol of ADN and 0.53 mol of FDCA with 107.1% Faraday efficiency.

MnOx -Decorated Nickel-Iron Phosphides Nanosheets: Interface Modifications for Robust Overall Water Splitting at Ultra-High Current Densities

Exploring highly active and stable bifunctional water-splitting electrocatalysts at ultra-high current densities is remarkably desirable. Herein, 3D nickel-iron phosphides nanosheets modified by MnO_x nanoparticles are grown on nickel foam (MnO_x /NiFeP/NF). Resulting from the electronic coupling effect enabled by interface modifications, the intrinsic activities of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are improved. Meanwhile, 3D nanosheets provide abundant active sites for HER and OER, leading to accelerating the reaction kinetics. Besides, the shell-protection characteristic of MnO_x improves the durability of MnO_x /NiFeP/NF. Therefore, MnO_x /NiFeP/NF shows exceptional bifunctional electrocatalytic activities toward HER (an overpotential of 255 mV at 500 mA cm^-2 ), OER (overpotentials of 296 and 346 mV at 500 and 1000 mA cm^-2 , respectively), and overall water splitting (cell voltages of 1.796 and 1.828 V at 500 and 1000 mA cm^-2 , respectively). Furthermore, it owns remarkably outstanding stability for overall water splitting at ultra-high current densities (120 and 70 h at 500 and 1000 mA cm^-2 , respectively), which outperforms almost all of the non-noble metal electrocatalysts. This work presents efficient strategies of interface modifications, 3D nanostructures, and shell protection to afford ultra-high current densities.