Photocatalytic oxidative degradation of hydrocarbon pollutants in refinery wastewater using TiO2 as catalyst

Metal oxide-based photocatalysts for the efficient degradation of organic pollutants for a sustainable environment: a review

Photocatalytic degradation is a highly efficient technique for eliminating organic pollutants such as antibiotics, organic dyes, toluene, nitrobenzene, cyclohexane, and refinery oil from the environment. The effects of operating conditions, concentrations of contaminants and catalysts, and their impact on the rate of deterioration are the key focuses of this review. This method utilizes light-activated semiconductor catalysts to generate reactive oxygen species that break down contaminants. Modified photocatalysts, such as metal oxides, doped metal oxides, and composite materials, enhance the effectiveness of photocatalytic degradation by improving light absorption and charge separation. Furthermore, operational conditions such as pH, temperature, and light intensity also play a crucial role in enhancing the degradation process. The results indicated that both high pollutant and catalyst concentrations improve the degradation rate up to a threshold, beyond which no significant benefits are observed. The optimal operational conditions were found to significantly enhance photocatalytic efficiency, with a marked increase in degradation rates under ideal settings. Antibiotics and organic dyes generally follow intricate degradation pathways, resulting in the breakdown of these substances into smaller, less detrimental compounds. On the other hand, hydrocarbons such as toluene and cyclohexane, along with nitrobenzene, may necessitate many stages to achieve complete mineralization. Several factors that affect the efficiency of degradation are the characteristics of the photocatalyst, pollutant concentration, light intensity, and the existence of co-catalysts. This approach offers a sustainable alternative for minimizing the amount of organic pollutants present in the environment, contributing to cleaner air and water. Photocatalytic degradation hence holds tremendous potential for remediation of the environment.

Advancements in TiO2-based photocatalysis for environmental remediation: Strategies for enhancing visible-light-driven activity

Researchers have focused on efficient techniques for degrading hazardous organic pollutants due to their negative impacts on ecological systems, necessitating immediate remediation. Specifically, TiO2-based photocatalysts, a wide-bandgap semiconductor material, have been extensively studied for their application in environmental remediation. However, the extensive band gap energy and speedy reattachment of electron (e-) and hole (h+) pairs in bare TiO2 are considered major disadvantages for photocatalysis. This review extensively focuses on the combination of semiconducting photocatalysts for commercial outcomes to develop efficient heterojunctions with high photocatalytic activity by minimizing the e-/h+ recombination rate. The improved activity of these heterojunctions is due to their greater surface area, rich active sites, narrow band gap, and high light-harvesting tendency. In this context, strategies for increasing visible light activity, including doping with metals and non-metals, surface modifications, morphology control, composite formation, heterojunction formation, bandgap engineering, surface plasmon resonance, and optimizing reaction conditions are discussed. Furthermore, this review critically assesses the latest developments in TiO2 photocatalysts for the efficient decomposition of various organic contaminants from wastewater, such as pharmaceutical waste, dyes, pesticides, aromatic hydrocarbons, and halo compounds. This review implies that doping is an effective, economical, and simple process for TiO2 nanostructures and that a heterogeneous photocatalytic mechanism is an eco-friendly substitute for the removal of various pollutants. This review provides valuable insights for researchers involved in the development of efficient photocatalysts for environmental remediation.

Petroleum sludge formation and its treatment methodologies: a review

Different petroleum operations produce huge amount of oil sludge annually. For instance, US EPA estimates the annual sludge production of each US refinery of 30,000 tons, while the average oily sludge produced from petrochemical industries in China is estimated about 3 million tons per year. In the last year, our center could recover about 30,206 barrels of raw oil from 32,786 barrels of tank bottom sludge (TBS) for different petroleum companies. This sludge causes huge economic losses besides its negative environmental impacts. The accumulation of sludge in the tanks results in reducing the tanks' capacity for storing liquid crude, accelerating the corrosion of the tanks, delay in the production schedule, and disturbing the whole production operation. There are diverse treatment methodologies such as solvent treatment, addition of certain chemicals, and centrifuging. Of course, the environmental regulations and the overall cost limitations are very important in deciding the preferred applicable method(s). Although several works handled the problem of sludge deposition and treatment from different aspects, we intend to introduce a different work. First, composition, formation, types, and properties of TBS were reviewed. Then, environmental and economic problems caused by TBS were revised. At last, different methodologies applied for treatment of oily TBS to recover oil and safe disposal of hazardous remains were investigated focusing on the most straightforward and environmentally friendly protocols. It is expected that this review attracts the experts in petroleum chemistry, and other relevant fields and provides a comprehensive understanding of current sludge control and treatment research.

An Overview of Photocatalytic Membrane Degradation Development

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored.

Integrated Photocatalytic Oxidation and Adsorption Approach for the Robust Treatment of Refinery Wastewater Using Hybrid TiO2/AC

This study reports the removal of hydrocarbon (HC) pollutants from petroleum refinery wastewater by integrated photocatalytic oxidation and adsorption using a TiO2/AC hybrid material. The hybrid adsorbent/catalyst was prepared by the impregnation of TiO2 over AC and characterized by FTIR, SEM, EDX, and XRD analyses. Under the optimized reaction conditions of pH 3, 30 °C, and 1000 mg TiO2/AC per 500 mL of sample in 50 min, the integrated photocatalytic oxidation-adsorption achieved a net percentage removal of benzene, toluene, aniline, and naphthalene of 91% from model HC solutions. Under these conditions, for the treatment of real refinery wastewater, TiO2/AC caused a 95% decrease in chemical oxygen demand (COD). The integrated photocatalytic oxidation and adsorption using TiO2/AC showed a clear advantage over the individual adsorption and photocatalytic oxidation using AC and TiO2, whereby about the same level of removal of model HCs and a decrease in the COD of refinery wastewater was attained in 105 min and 90 min, respectively, utilizing larger adsorbent/catalyst dosages. GC-MS analysis revealed that during the integrated process of adsorption-photocatalytic oxidation, all the parent HCs and oxidation byproducts were completely removed from the refinery wastewater. Based on the outstanding performance, cost-effectiveness, and environmental greenness, the newly designed TiO2/AC via the integrated adsorption-photocatalytic oxidation can be counted as an effective alternative route for the large-scale processing of refinery wastewater.

Trend in Research on Characterization, Environmental Impacts and Treatment of Oily Sludge: A Systematic Review

Oily sludge is a hazardous material generated from the petroleum industry that has attracted increasing research interest. Although several review articles have dealt with specific subtopics focusing on the treatment of oily sludge based on selected references, no attempt has been made to demonstrate the research trend of oily sludge comprehensively and quantitatively. This study conducted a systematic review to analyze and evaluate all oily sludge-related journal articles retrieved from the Web of Science database. The results show that an increase in oily sludge-related research did not take place until recent years and the distribution of the researchers is geographically out of balance. Most oily sludge-related articles focused on treatment for harmfulness reduction or valorization with limited coverage of formation, characterization, and environmental impact assessment of oily sludge. Pyrolytic treatment has attracted increasing research attention in recent years. So far, the research findings have been largely based on laboratory-scale experiments with insufficient consideration of the cost-effectiveness of the proposed treatment methods. Although many methods have been proposed, few alone could satisfactorily achieve cost-effective treatment goals. To enable sustainable management of oily sludge on a global scale, efforts need to be made to fund more research projects, especially in the major oil-producing countries. Pilot-scale experiments using readily available and affordable materials should be encouraged for practical purposes. This will allow a sensible cost-benefit analysis of a proposed method/procedure for oily sludge treatment. To improve the treatment performance, combined methods are more desirable. To inform the smart selection of methods for the treatment of different oily sludge types, it is suggested to develop universally accepted evaluation systems for characterization and environmental risk of oily sludge.

Petroleum Hydrocarbon Composition of Oily Sludge and Contaminated Soils in a Decommissioned Oilfield Waste Pit under Desert Conditions

Field and laboratory investigations were conducted to characterize the composition of petroleum hydrocarbons in oily sludge and the underlying contaminated soils in a decommissioned oilfield waste pit in Kuwait. The results show that the petroleum hydrocarbon composition in the oily sludge and contaminated soils was spatially variable. Highly toxic petroleum hydrocarbon species such as BTEX and PAHs were generally lacking, and both sludge- and soil-borne hydrocarbons were dominated by long-chain petroleum hydrocarbons. The soil contamination depth was generally very shallow although localized deep profiles (>0.5 m) were found. A loose relationship was established between TPH in the sludge and that in the underlying soil. On average, the soil had a greater percentage of shorter-chain hydrocarbon fractions (either aliphatics or aromatics), as compared to the sludge. The environmental risk from the oily sludge and contaminated soils is considered to be relatively low. For cost-effective management of the environmental risk of decommissioning an oilfield waste pit, containment of the sludge and contaminated soils using a soil-capping approach may be sufficient to minimize the possible adverse environmental impacts from the decommissioned waste pit, and this may represent an option that is superior to other costly remediation strategies.

Response Surface Methodology: Photocatalytic Degradation Kinetics of Basic Blue 41 Dye Using Activated Carbon with TiO2

Water decontamination still remains a major challenge to some developing countries not having centralized wastewater systems. Therefore, this study presents the optimization of photocatalytic degradation of Basic Blue 41 dye in an aqueous medium by an activated carbon (AC)-TiO₂ photocatalyst under UV irradiation. The mesoporous AC-TiO₂ synthesized by a sonication method was characterized by X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy for crystal phase identification and molecular bond structures, respectively. The efficiency of the AC-TiO₂ was evaluated as a function of three input variables viz. catalyst load (2-4 g), reaction time (15-45 min) and pH (6-9) by using Box-Behnken design (BBD) adapted from response surface methodology. Using color and turbidity removal as responses, a 17 run experiment matrix was generated by the BBD to investigate the interaction effects of the three aforementioned input factors. From the results, a reduced quadratic model was generated, which showed good predictability of results agreeable to the experimental data. The analysis of variance (ANOVA), signposted the selected models for color and turbidity, was highly significant (p < 0.05) with coefficients of determination (R²) values of 0.972 and 0.988, respectively. The catalyst load was found as the most significant factor with a high antagonistic impact on the process, whereas the interactive effect of reaction time and pH affected the process positively. At optimal conditions of catalyst load (2.6 g), reaction time (45 min), and pH (6); the desirability of 96% was obtained by a numerical optimization approach representing turbidity removal of 93% and color of 96%.

Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon

This study presents a hybridized photocatalyst with adsorbate as a promising nanocomposite for photoremediation of wastewater. Photocatalytic degradation of bromophenol blue (BPB) in aqueous solution under UV-irradiation of wavelength 400 nm was carried out with TiO2 doped with activated carbon (A) and clinoptilolite (Z) via the co-precipitation technique. The physiochemical properties of the nanocomposite (A–TiO2 and Z–TiO2) and TiO2 were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared (FTIR) spectroscopy. Results of the nanocomposite (A–TiO2 and Z–TiO2) efficiency was compared to that with the TiO2, which demonstrated their adsorption and synergistic effect for the removal of chemical oxygen demand (COD) and color from the wastewater. At an optimal load of 4 g, the photocatalytic degradation activity (Z–TiO2 > A–TiO2 > TiO2) was found favorably by the second-order kinetic model. Consequently, the Langmuir adsorption isotherms favored the nanocomposites (Z–TiO2 > A–TiO2), whereas that of the TiO2 fitted very well on the Freundlich isotherm approach. Z–TiO2 evidently exhibited a high photocatalytic efficacy of decomposition over 80% of BPB (COD) at reaction rate constant (k) and coefficient of determination (R2) values of 5.63 × 10−4 min−1 and 0.989, respectively.