Purification, characterization and crystallization of Acanthamoeba profilin expressed in Escherichia coli

Microtubules under mechanical pressure can breach dense actin networks

The crosstalk between the actin network and microtubules is essential for cell polarity. It orchestrates microtubule organization within the cell, driven by the asymmetry of actin architecture along the cell periphery. The physical intertwining of these networks regulates spatial organization and force distribution in the microtubule network. Although their biochemical interactions are becoming clearer, the mechanical aspects remain less understood. To explore this mechanical interplay, we developed an in vitro reconstitution assay to investigate how dynamic microtubules interact with various actin filament structures. Our findings revealed that microtubules can align and move along linear actin filament bundles through polymerization force. However, they are unable to pass through when encountering dense branched actin meshworks, similar to those present in the lamellipodium along the periphery of the cell. Interestingly, immobilizing microtubules through crosslinking with actin or other means allow the buildup of pressure, enabling them to breach these dense actin barriers. This mechanism offers insights into microtubule progression towards the cell periphery, with them overcoming obstacles within the denser parts of the actin network and ultimately contributing to cell polarity establishment.

Friction patterns guide actin network contraction

The shape of cells is the outcome of the balance of inner forces produced by the actomyosin network and the resistive forces produced by cell adhesion to their environment. The specific contributions of contractile, anchoring and friction forces to network deformation rate and orientation are difficult to disentangle in living cells where they influence each other. Here, we reconstituted contractile actomyosin networks in vitro to study specifically the role of the friction forces between the network and its anchoring substrate. To modulate the magnitude and spatial distribution of friction forces, we used glass or lipids surface micropatterning to control the initial shape of the network. We adapted the concentration of Nucleating Promoting Factor on each surface to induce the assembly of actin networks of similar densities and compare the deformation of the network toward the centroid of the pattern shape upon myosin-induced contraction. We found that actin network deformation was faster and more coordinated on lipid bilayers than on glass, showing the resistance of friction to network contraction. To further study the role of the spatial distribution of these friction forces, we designed heterogeneous micropatterns made of glass and lipids. The deformation upon contraction was no longer symmetric but biased toward the region of higher friction. Furthermore, we showed that the pattern of friction could robustly drive network contraction and dominate the contribution of asymmetric distributions of myosins. Therefore, we demonstrate that during contraction, both the active and resistive forces are essential to direct the actin network deformation.

Recycling of the actin monomer pool limits the lifetime of network turnover

Intracellular organization is largely mediated by actin turnover. Cellular actin networks continuously assemble and disassemble, while maintaining their overall appearance. This behavior, called "dynamic steady state," allows cells to sense and adapt to their environment. However, how structural stability can be maintained during the constant turnover of a limited actin monomer pool is poorly understood. To answer this question, we developed an experimental system where polystyrene beads are propelled by an actin comet in a microwell containing a limited amount of components. We used the speed and the size of the actin comet tails to evaluate the system's monomer consumption and its lifetime. We established the relative contribution of actin assembly, disassembly, and recycling for a bead movement over tens of hours. Recycling mediated by cyclase-associated protein (CAP) is the key step in allowing the reuse of monomers for multiple assembly cycles. ATP supply and protein aging are also factors that limit the lifetime of actin turnover. This work reveals the balancing mechanism for long-term network assembly with a limited amount of building blocks.

Insights into the evolution of regulated actin dynamics via characterization of primitive gelsolin/cofilin proteins from Asgard archaea

Eukaryotic gelsolin superfamily proteins generally comprise three or more related domains. Here we characterize single- and double-domain gelsolins from Thorarchaeota (Thor). Similar domain architectures are present in Heimdall-, Loki-, and Odinarchaeota. Thor gelsolins are functional in regulating rabbit actin in in vitro assays, showing a range of activities including actin filament severing and bundling. These gelsolins bind to the eukaryotic gelsolin/cofilin-binding site on actin. Two-domain, but not one-domain, gelsolins are calcium regulated. Thor gelsolins appear to have the characteristics and structure consistent with primitive gelsolins/cofilins, suggesting that these single- and double-domain gelsolins are a record of a nascent preeukaryotic actin-regulation machinery.

Asgard archaea genomes contain potential eukaryotic-like genes that provide intriguing insight for the evolution of eukaryotes. The eukaryotic actin polymerization/depolymerization cycle is critical for providing force and structure in many processes, including membrane remodeling. In general, Asgard genomes encode two classes of actin-regulating proteins from sequence analysis, profilins and gelsolins. Asgard profilins were demonstrated to regulate actin filament nucleation. Here, we identify actin filament severing, capping, annealing and bundling, and monomer sequestration activities by gelsolin proteins from Thorarchaeota (Thor), which complete a eukaryotic-like actin depolymerization cycle, and indicate complex actin cytoskeleton regulation in Asgard organisms. Thor gelsolins have homologs in other Asgard archaea and comprise one or two copies of the prototypical gelsolin domain. This appears to be a record of an initial preeukaryotic gene duplication event, since eukaryotic gelsolins are generally comprise three to six domains. X-ray structures of these proteins in complex with mammalian actin revealed similar interactions to the first domain of human gelsolin or cofilin with actin. Asgard two-domain, but not one-domain, gelsolins contain calcium-binding sites, which is manifested in calcium-controlled activities. Expression of two-domain gelsolins in mammalian cells enhanced actin filament disassembly on ionomycin-triggered calcium release. This functional demonstration, at the cellular level, provides evidence for a calcium-controlled Asgard actin cytoskeleton, indicating that the calcium-regulated actin cytoskeleton predates eukaryotes. In eukaryotes, dynamic bundled actin filaments are responsible for shaping filopodia and microvilli. By correlation, we hypothesize that the formation of the protrusions observed from Lokiarchaeota cell bodies may involve the gelsolin-regulated actin structures.

Local actin nucleation tunes centrosomal microtubule nucleation during passage through mitosis

Cells going through mitosis undergo precisely timed changes in cell shape and organisation, which serve to ensure the fair partitioning of cellular components into the two daughter cells. These structural changes are driven by changes in actin filament and microtubule dynamics and organisation. While most evidence suggests that the two cytoskeletal systems are remodelled in parallel during mitosis, recent work in interphase cells has implicated the centrosome in both microtubule and actin nucleation, suggesting the potential for regulatory crosstalk between the two systems. Here, by using both in vitro and in vivo assays to study centrosomal actin nucleation as cells pass through mitosis, we show that mitotic exit is accompanied by a burst in cytoplasmic actin filament formation that depends on WASH and the Arp2/3 complex. This leads to the accumulation of actin around centrosomes as cells enter anaphase and to a corresponding reduction in the density of centrosomal microtubules. Taken together, these data suggest that the mitotic regulation of centrosomal WASH and the Arp2/3 complex controls local actin nucleation, which may function to tune the levels of centrosomal microtubules during passage through mitosis.

Quantitative regulation of the dynamic steady state of actin networks

Principles of regulation of actin network dimensions are fundamentally important for cell functions, yet remain unclear. Using both in vitro and in silico approaches, we studied the effect of key parameters, such as actin density, ADF/Cofilin concentration and network width on the network length. In the presence of ADF/Cofilin, networks reached equilibrium and became treadmilling. At the trailing edge, the network disintegrated into large fragments. A mathematical model predicts the network length as a function of width, actin and ADF/Cofilin concentrations. Local depletion of ADF/Cofilin by binding to actin is significant, leading to wider networks growing longer. A single rate of breaking network nodes, proportional to ADF/Cofilin density and inversely proportional to the square of the actin density, can account for the disassembly dynamics. Selective disassembly of heterogeneous networks by ADF/Cofilin controls steering during motility. Our results establish general principles on how the dynamic steady state of actin network emerges from biochemical and structural feedbacks.

Network heterogeneity regulates steering in actin-based motility

The growth of branched actin networks powers cell-edge protrusions and motility. A heterogeneous density of actin, which yields to a tunable cellular response, characterizes these dynamic structures. We study how actin organization controls both the rate and the steering during lamellipodium growth. We use a high-resolution surface structuration assay combined with mathematical modeling to describe the growth of a reconstituted lamellipodium. We demonstrate that local monomer depletion at the site of assembly negatively impacts the network growth rate. At the same time, network architecture tunes the protrusion efficiency, and regulates the rate of growth. One consequence of this interdependence between monomer depletion and network architecture effects is the ability of heterogeneous network to impose steering during motility. Therefore, we have established that the general principle, by which the cell can modulate the rate and the direction of a protrusion, is by varying both density and architecture of its actin network.

Protrusive cellular structures contain a heterogeneous density of actin, but whether this influences motility is not known. Using an in vitro system and modelling, here the authors show that local actin monomer depletion and network architecture can tune the rate of network growth to impose steering during motility.

Actin dynamics, architecture, and mechanics in cell motility

Tight coupling between biochemical and mechanical properties of the actin cytoskeleton drives a large range of cellular processes including polarity establishment, morphogenesis, and motility. This is possible because actin filaments are semi-flexible polymers that, in conjunction with the molecular motor myosin, can act as biological active springs or "dashpots" (in laymen's terms, shock absorbers or fluidizers) able to exert or resist against force in a cellular environment. To modulate their mechanical properties, actin filaments can organize into a variety of architectures generating a diversity of cellular organizations including branched or crosslinked networks in the lamellipodium, parallel bundles in filopodia, and antiparallel structures in contractile fibers. In this review we describe the feedback loop between biochemical and mechanical properties of actin organization at the molecular level in vitro, then we integrate this knowledge into our current understanding of cellular actin organization and its physiological roles.

Differential protein expression in EC304 gastric cancer cells induced by alphastatin

OBJECTIVE

To explore the differential protein expression profile in EC304 gastric cancer cells induced by alphastatin.

METHODS

Cultured EC304 cells in the exponential phase of growth were randomly divided into alphastatin and control groups. Total proteins were extracted and the two dimensional electrophoresis (2-DE) technique was applied to analyze differences in expression with ImageMaster 2D Platinum 5.0 software. Proteins were identified using the MASCOT database and selected differently expressed proteins were characterised by western blotting and immunofluorescence.

RESULTS

1350 ± 90 protein spots were detected by the ImageMaster software in the 2-DE gel images from the control and alphastatin groups. The match rate was about 72-80% for the spectrum profiles, with 29 significantly different protein spots being identified, 10 upregulated, 16 downregulated, two new and one lost. The MASCOT search scores were 64-666 and the peptide matching numbers were 3-27 with sequence coverage of 8-62%. Twenty-three proteins were checked by mass spectrometry, including decrease in Nm23 and profilin-2 isoform b associated with the regulation of actin multimerisation induced by extracellular signals.

CONCLUSION

The proteome in EC304 cells is dramatically altered by alphastatin, which appears to play an important role in modulating cellular activity and anti-angiogenesis by regulating protein expression and signal transduction pathways through Nm23 and profilin-2 isoform b, providing new research directions for anti-angiogenic therapy of gastric cancer.

Turnover of branched actin filament networks by stochastic fragmentation with ADF/cofilin

Cell motility depends on the rapid assembly, aging, severing, and disassembly of actin filaments in spatially distinct zones. How a set of actin regulatory proteins that sustains actin-based force generation during motility work together in space and time remains poorly understood. We present our study of the distribution and dynamics of Arp2/3 complex, capping protein (CP), and actin-depolymerizing factor (ADF)/cofilin in actin "comet tails," using a minimal reconstituted system with nucleation-promoting factor (NPF)-coated beads. The Arp2/3 complex concentrates at nucleation sites near the beads as well as in the first actin shell. CP colocalizes with actin and is homogeneously distributed throughout the comet tail; it serves to constrain the spatial distribution of ATP/ADP-P(i) filament zones to areas near the bead. The association of ADF/cofilin with the actin network is therefore governed by kinetics of actin assembly, actin nucleotide state, and CP binding. A kinetic simulation accurately validates these observations. Following its binding to the actin networks, ADF/cofilin is able to break up the dense actin filament array of a comet tail. Stochastic severing by ADF/cofilin loosens the tight entanglement of actin filaments inside the comet tail and facilitates turnover through the macroscopic release of large portions of the aged actin network.

Incompatibility with formin Cdc12p prevents human profilin from substituting for fission yeast profilin: insights from crystal structures of fission yeast profilin

Expression of human profilin-I does not complement the temperature-sensitive cdc3-124 mutation of the single profilin gene in fission yeast Schizosaccharomyces pombe, resulting in death from cytokinesis defects. Human profilin-I and S. pombe profilin have similar affinities for actin monomers, the FH1 domain of fission yeast formin Cdc12p and poly-L-proline (Lu, J., and Pollard, T. D. (2001) Mol. Biol. Cell 12, 1161-1175), but human profilin-I does not stimulate actin filament elongation by formin Cdc12p like S. pombe profilin. Two crystal structures of S. pombe profilin and homology models of S. pombe profilin bound to actin show how the two profilins bind to identical surfaces on animal and yeast actins even though 75% of the residues on the profilin side of the interaction differ in the two profilins. Overexpression of human profilin-I in fission yeast expressing native profilin also causes cytokinesis defects incompatible with viability. Human profilin-I with the R88E mutation has no detectable affinity for actin and does not have this dominant overexpression phenotype. The Y6D mutation reduces the affinity of human profilin-I for poly-l-proline by 1000-fold, but overexpression of Y6D profilin in fission yeast is lethal. The most likely hypotheses to explain the incompatibility of human profilin-I with Cdc12p are differences in interactions with the proline-rich sequences in the FH1 domain of Cdc12p and wider "wings" that interact with actin.

The Structural Basis of Actin Interaction with Multiple WH2/β-Thymosin Motif-Containing Proteins

Participation of actin in cellular processes relies on the dynamics of filament assembly. Filament elongation is fed by monomeric actin in complex with either profilin or a Wiscott-Aldrich syndrome protein (WASP) homology domain 2 (WH2)/beta-thymosin (betaT) domain. WH2/betaT motif repetition (typified by ciboulot) or combination with nonrelated domains (as found in N-WASP) results in proteins that yield their actin to filament elongation. Here, we report the crystal structures of actin bound hybrid proteins, constructed between gelsolin and WH2/betaT domains from ciboulot or N-WASP. We observe the C-terminal half of ciboulot domain 2 bound to actin. In solution, we show that cibolout domains 2 and 3 bind to both G- and F-actin, and that whole ciboulot forms a complex with two actin monomers. In contrast, the analogous portion of N-WASP WH2 domain 2 is detached from actin, indicating that the C-terminal halves of the betaT and WH2 motifs are not functionally analogous.

Evidence for two interaction regions for phosphatidylinositol(4,5)-bisphosphate on mammalian profilin I

The binding of phosphatidylinositol(4,5)-bisphosphate (PI(4,5)P(2)) to profilin at a region distinct from the actin interaction surface is demonstrated by experiments with covalently cross-linked profilin:beta-actin. The result is in agreement with observations made with several mutant profilins and provides strong evidence for two regions on mammalian profilin mediating electrostatic interaction with phosphatidylinositol lipids; one close to the binding site for poly(L-proline), and one partially overlapping with the actin-binding surface. Congruent with this, two plant profilins, which have a reduced number of positive amino acids in one of these regions, displayed a dramatically lower binding to PI(4,5)P(2) compared to human profilin I.

Direct observation of dendritic actin filament networks nucleated by Arp2/3 complex and WASP/Scar proteins

Most nucleated cells crawl about by extending a pseudopod that is driven by the polymerization of actin filaments in the cytoplasm behind the leading edge of the plasma membrane. These actin filaments are linked into a network by Y-branches, with the pointed end of each filament attached to the side of another filament and the rapidly growing barbed end facing forward. Because Arp2/3 complex nucleates actin polymerization and links the pointed end to the side of another filament in vitro, a dendritic nucleation model has been proposed in which Arp2/3 complex initiates filaments from the sides of older filaments. Here we report, by using a light microscopy assay, many new features of the mechanism. Branching occurs during, rather than after, nucleation by Arp2/3 complex activated by the Wiskott-Aldrich syndrome protein (WASP) or Scar protein; capping protein and profilin act synergistically with Arp2/3 complex to favour branched nucleation; phosphate release from aged actin filaments favours dissociation of Arp2/3 complex from the pointed ends of filaments; and branches created by Arp2/3 complex are relatively rigid. These properties result in the automatic assembly of the branched actin network after activation by proteins of the WASP/Scar family and favour the selective disassembly of proximal regions of the network.

Profilin is predominantly associated with monomeric actin in Acanthamoeba

We used biochemical fractionation, immunoassays and microscopy of live and fixed Acanthamoeba to determine how much profilin is bound to its known ligands: actin, membrane PIP(2), Arp2/3 complex and polyproline sequences. Virtually all profilin is soluble after gentle homogenization of cells. During gel filtration of extracts on Sephadex G75, approximately 60% of profilin chromatographs with monomeric actin, 40% is free and none voids with Arp2/3 complex or other large particles. Selective monoclonal antibodies confirm that most of the profilin is bound to actin: 65% in extract immunoadsorption assays and 74–89% by fluorescent antibody staining. Other than monomeric actin, no major profilin ligands are detected in crude extracts. Profilin-II labeled with rhodamine on cysteine at position 58 retains its affinity for actin, PIP(2) and poly-L-proline. When syringe-loaded into live cells, it distributes throughout the cytoplasm, is excluded from membrane-bounded organelles, and concentrates in lamellapodia and sites of endocytosis but not directly on the plasma membrane. Some profilin fluorescence appears punctate, but since no particulate profilin is detected biochemically, these spots may be soluble profilin between organelles that exclude profilin. The distribution of profilin in fixed human A431 cells is similar to that in amoebas. Our results show that the major pool of polymerizable actin monomers is complexed with profilin and spread throughout the cytoplasm.

The molecular basis for allergen cross-reactivity: crystal structure and IgE-epitope mapping of birch pollen profilin

BACKGROUND

The profilins are a group of ubiquitous actin monomer binding proteins that are responsible for regulating the normal distribution of filamentous actin networks in eukaryotic cells. Profilins also bind polyphosphoinositides, which can disrupt the profilin-action complex, and proline-rich ligands which localize profilin to sites requiring extensive actin filament accumulation. Profilins represent cross-reactive allergens for almost 20 % of all pollen allergic patients.

RESULTS

We report the X-ray crystal structure of birch pollen profilin (BPP) at 2.4 resolution. The major IgE-reactive epitopes have been mapped and were found to cluster on the N- and C-terminal alpha helices and a segment of the protein containing two strands of the beta sheet. The overall fold of this protein is similar to that of the mammalian and amoeba profilins, however, there is a significant change in the orientation of the N-terminal alpha helix in BPP. This change in orientation alters the topography of a hydrophobic patch on the surface of the molecule, which is thought to be involved in the binding of proline-rich ligands.

CONCLUSIONS

Profilin has been identified as an important cross-reactive allergen for patients suffering from multivalent type I allergy. The prevalent epitopic areas are located in regions with conserved sequence and secondary structure and overlap the binding sites for natural profilin ligands, indicating that the native ligand-free profilin acts as the original cross-sensitizing agent. Structural homology indicates that the basic features of the G actin-profilin interaction are conserved in all eukaryotic organisms, but suggests that mechanistic differences in the binding of proline-rich ligands may exist. The structure of BPP provides a molecular basis for understanding allergen cross-reactivity.

Molecular and structural analysis of a continuous birch profilin epitope defined by a monoclonal antibody

The interaction of a mouse monoclonal antibody (4A6) and birch profilin, a structurally well conserved actin- and phosphoinositide-binding protein and cross-reactive allergen, was characterized. In contrast to serum IgE from allergic patients, which shows cross-reactivity with most plants, monoclonal antibody 4A6 selectively reacted with tree pollen profilins. Using synthetic overlapping peptides, a continuous hexapeptide epitope was identified. The exchange of a single amino acid (Gln-47 --> Glu) within the epitope was found to abolish the binding of monoclonal antibody 4A6 to other plant profilins. The NMR analyses of the birch and the nonreactive timothy grass profilin peptides showed that the loss of binding was not due to major structural differences. Both peptides adopted extended conformations similar to that observed for the epitope in the x-ray crystal structure of the native birch profilin. Binding studies with peptides and birch profilin mutants generated by in vitro mutagenesis demonstrated that the change of Gln-47 to acidic amino acids (e.g. Glu or Asp) led to electrostatic repulsion of monoclonal antibody 4A6. In conclusion the molecular and structural analyses of the interaction of a monoclonal antibody with a continuous peptide epitope, recognized in a conformation similar to that displayed on the native protein, are presented.

Purification of a cortical complex containing two unconventional actins from Acanthamoeba by affinity chromatography on profilin-agarose

We identified four polypeptides of 47, 44, 40, and 35 kD that bind to profilin-Sepharose and elute with high salt. When purified by conventional chromatography using an antibody to the 47-kD polypeptide, these four polypeptides copurified as a stoichiometric complex together with three additional polypeptides of 19, 18, and 13 kD that varied in their proportions to the other polypeptides. Partial protein sequences showed that the 47-kD polypeptide is a homologue of S. pombe act2 and the 44-kD polypeptide is a homologue of S. cerevisiae ACT2, both unconventional actins. The 40-kD polypeptide contains a sequence similar to the WD40 motif of the G beta subunit of a trimeric G-protein from Dictyostelium discoideum. From partial sequences, the 35-, 19-, and 18-kD polypeptides appear to be novel proteins. On gel filtration the complex of purified polypeptides cochromatograph with a Stokes' radius of 4.8 nm, a value consistent with a globular particle of 220 kD containing one copy of each polypeptide. Cell extracts also contain components of the complex that do not bind the profilin column. Affinity purified antibodies localize 47- and 18/19-kD polypeptides in the cortex and filopodia of Acanthamoeba. Antibodies to the 47-kD unconventional actin cross-react on immunoblots with polypeptides of similar size in Dictyostelium, rabbit muscle, and conventional preparations of rabbit muscle actin but do not react with actin.