Direct visualization of extensibility in isolated titin molecules

Titin: roles in cardiac function and diseases

The giant protein titin is an essential component of muscle sarcomeres. A single titin molecule spans half a sarcomere and mediates diverse functions along its length by virtue of its unique domains. The A-band of titin functions as a molecular blueprint that defines the length of the thick filaments, the I-band constitutes a molecular spring that determines cell-based passive stiffness, and various domains, including the Z-disk, I-band, and M-line, serve as scaffolds for stretch-sensing signaling pathways that mediate mechanotransduction. This review aims to discuss recent insights into titin's functional roles and their relationship to cardiac function. The role of titin in heart diseases, such as dilated cardiomyopathy and heart failure with preserved ejection fraction, as well as its potential as a therapeutic target, is also discussed.

Stretching the story of titin and muscle function

The discovery of the giant protein titin, also known as connectin, dates almost half a century back. In this review, I recapitulate major advances in the discovery of the titin filaments and the recognition of their properties and function until today. I briefly discuss how our understanding of the layout and interactions of titin in muscle sarcomeres has evolved and review key facts about the titin sequence at the gene (TTN) and protein levels. I also touch upon properties of titin important for the stability of the contractile units and the assembly and maintenance of sarcomeric proteins. The greater part of my discussion centers around the mechanical function of titin in skeletal muscle. I cover milestones of research on titin's role in stretch-dependent passive tension development, recollect the reasons behind the enormous elastic diversity of titin, and provide an update on the molecular mechanisms of titin elasticity, details of which are emerging even now. I reflect on current knowledge of how muscle fibers behave mechanically if titin stiffness is removed and how titin stiffness can be dynamically regulated, such as by posttranslational modifications or calcium binding. Finally, I highlight novel and exciting, but still controversially discussed, insight into the role titin plays in active tension development, such as length-dependent activation and contraction from longer muscle lengths.

Amyloid Properties of Titin

This review considers data on structural and functional features of titin, on the role of this protein in determination of mechanical properties of sarcomeres, and on specific features of regulation of the stiffness and elasticity of its molecules, amyloid aggregation of this protein in vitro, and possibilities of formation of intramolecular amyloid structure in vivo. Molecular mechanisms are described of protection of titin against aggregation in muscle cells. Based on the data analysis, it is supposed that titin and the formed by it elastic filaments have features of amyloid.

Flow-induced elongation of von Willebrand factor precedes tension-dependent activation

Von Willebrand factor, an ultralarge concatemeric blood protein, must bind to platelet GPIbα during bleeding to mediate hemostasis, but not in the normal circulation to avoid thrombosis. Von Willebrand factor is proposed to be mechanically activated by flow, but the mechanism remains unclear. Using microfluidics with single-molecule imaging, we simultaneously monitored reversible Von Willebrand factor extension and binding to GPIbα under flow. We show that Von Willebrand factor is activated through a two-step conformational transition: first, elongation from compact to linear form, and subsequently, a tension-dependent local transition to a state with high affinity for GPIbα. High-affinity sites develop only in upstream regions of VWF where tension exceeds ~21 pN and depend upon electrostatic interactions. Re-compaction of Von Willebrand factor is accelerated by intramolecular interactions and increases GPIbα dissociation rate. This mechanism enables VWF to be locally activated by hydrodynamic force in hemorrhage and rapidly deactivated downstream, providing a paradigm for hierarchical mechano-regulation of receptor–ligand binding.

Von Willebrand factor (VWF) is a blood protein involved in clotting and is proposed to be activated by flow, but the mechanism is unknown. Here the authors show that VWF is first converted from a compact to linear form by flow, and is subsequently activated to bind GPIbα in a tension-dependent manner.

Smooth muscle titin forms in vitro amyloid aggregates

Amyloids are insoluble fibrous protein aggregates, and their accumulation is associated with amyloidosis and many neurodegenerative diseases, including Alzheimer's disease. In the present study, we report that smooth muscle titin (SMT; 500 kDa) from chicken gizzard forms amyloid aggregates in vitro. This conclusion is supported by EM data, fluorescence analysis using thioflavin T (ThT), Congo red (CR) spectroscopy and X-ray diffraction. Our dynamic light scattering (DLS) data show that titin forms in vitro amyloid aggregates with a hydrodynamic radius (Rh) of approximately 700–4500 nm. The initial titin aggregates with Rh approximately 700 nm were observed beyond first 20 min its aggregation that shows a high rate of amyloid formation by this protein. We also showed using confocal microscopy the cytotoxic effect of SMT amyloid aggregates on smooth muscle cells from bovine aorta. This effect involves the disorganization of the actin cytoskeleton and result is cell damage. Cumulatively, our results indicate that titin may be involved in generation of amyloidosis in smooth muscles.

Biophysical characterization of naturally occurring titin M10 mutations

The giant proteins titin and obscurin are important for sarcomeric organization, stretch response, and sarcomerogenesis in myofibrils. The extreme C-terminus of titin (the M10 domain) binds to the N-terminus of obscurin (the Ig1 domain) in the M-band. The high-resolution structure of human M10 has been solved, along with M10 bound to one of its two known molecular targets, the Ig1 domain of obscurin-like. Multiple M10 mutations are linked to limb-girdle muscular dystrophy type 2J (LGMD2J) and tibial muscular dystrophy (TMD). The effect of the M10 mutations on protein structure and function has not been thoroughly characterized. We have engineered all four of the naturally occurring human M10 missense mutants and biophysically characterized them in vitro. Two of the four mutated constructs are severely misfolded, and cannot bind to the obscurin Ig1 domain. One mutation, H66P, is folded at room temperature but unfolds at 37°C, rendering it binding incompetent. The I57N mutation shows no significant structural, dynamic, or binding differences from the wild-type domain. We suggest that this mutation is not directly responsible for muscle wasting disease, but is instead merely a silent mutation found in symptomatic patients. Understanding the biophysical basis of muscle wasting disease can help streamline potential future treatments.

Stretching desmin filaments with receding meniscus reveals large axial tensile strength

Desmin forms the intermediate filament system of muscle cells where it plays important role in maintaining mechanical integrity and elasticity. Although the importance of intermediate-filament elasticity in cellular mechanics is being increasingly recognized, the molecular basis of desmin's elasticity is not fully understood. We explored desmin elasticity by molecular combing with forces calculated to be as large as 4nN. Average filament contour length increased 1.55-fold axial on average. Molecular combing together with EGTA-treatment caused the fragmentation of the filament into short, 60 to 120-nm-long and 4-nm-wide structures. The fragments display a surface periodicity of 38nm, suggesting that they are composed of laterally attached desmin dimers. The axis of the fragments may deviate significantly from that of the overstretched filament, indicating that they have a large orientational freedom in spite of being axially interconnected. The emergence of protofibril fragments thus suggests that the interconnecting head or tail domains of coiled-coil desmin dimers are load-bearing elements during axial stretch.

Individual globular domains and domain unfolding visualized in overstretched titin molecules with atomic force microscopy

Titin is a giant elastomeric protein responsible for the generation of passive muscle force. Mechanical force unfolds titin's globular domains, but the exact structure of the overstretched titin molecule is not known. Here we analyzed, by using high-resolution atomic force microscopy, the structure of titin molecules overstretched with receding meniscus. The axial contour of the molecules was interrupted by topographical gaps with a mean width of 27.7 nm that corresponds well to the length of an unfolded globular (immunoglobulin and fibronectin) domain. The wide gap-width distribution suggests, however, that additional mechanisms such as partial domain unfolding and the unfolding of neighboring domain multimers may also be present. In the folded regions we resolved globules with an average spacing of 5.9 nm, which is consistent with a titin chain composed globular domains with extended interdomain linker regions. Topographical analysis allowed us to allocate the most distal unfolded titin region to the kinase domain, suggesting that this domain systematically unfolds when the molecule is exposed to overstretching forces. The observations support the prediction that upon the action of stretching forces the N-terminal ß-sheet of the titin kinase unfolds, thus exposing the enzyme's ATP-binding site and hence contributing to the molecule's mechanosensory function.

Human myocytes are protected from titin aggregation-induced stiffening by small heat shock proteins

Small heat shock proteins translocate to unfolded titin Ig domains under stress conditions to prevent titin aggregation and myocyte stiffening.

In myocytes, small heat shock proteins (sHSPs) are preferentially translocated under stress to the sarcomeres. The functional implications of this translocation are poorly understood. We show here that HSP27 and αB-crystallin associated with immunoglobulin-like (Ig) domain-containing regions, but not the disordered PEVK domain (titin region rich in proline, glutamate, valine, and lysine), of the titin springs. In sarcomeres, sHSP binding to titin was actin filament independent and promoted by factors that increased titin Ig unfolding, including sarcomere stretch and the expression of stiff titin isoforms. Titin spring elements behaved predominantly as monomers in vitro. However, unfolded Ig segments aggregated, preferentially under acidic conditions, and αB-crystallin prevented this aggregation. Disordered regions did not aggregate. Promoting titin Ig unfolding in cardiomyocytes caused elevated stiffness under acidic stress, but HSP27 or αB-crystallin suppressed this stiffening. In diseased human muscle and heart, both sHSPs associated with the titin springs, in contrast to the cytosolic/Z-disk localization seen in healthy muscle/heart. We conclude that aggregation of unfolded titin Ig domains stiffens myocytes and that sHSPs translocate to these domains to prevent this aggregation.

Low-force transitions in single titin molecules reflect a memory of contractile history

Titin is a giant elastomeric muscle protein that has been suggested to function as a sensor of sarcomeric stress and strain, but the mechanisms by which it does so are unresolved. To gain insight into its mechanosensory function we manipulated single titin molecules with high-resolution optical tweezers. Discrete, step-wise transitions, with rates faster than canonical Ig domain unfolding occurred during stretch at forces as low as 5 pN. Multiple mechanisms and molecular regions (PEVK, proximal tandem-Ig, N2A) are likely to be involved. The pattern of transitions is sensitive to the history of contractile events. Monte-Carlo simulations of our experimental results predicted that structural transitions begin before the complete extension of the PEVK domain. High-resolution atomic force microscopy (AFM) supported this prediction. Addition of glutamate-rich PEVK domain fragments competitively inhibited the viscoelastic response in both single titin molecules and muscle fibers, indicating that PEVK domain interactions contribute significantly to sarcomere mechanics. Thus, under non-equilibrium conditions across the physiological force range, titin extends by a complex pattern of history-dependent discrete conformational transitions, which, by dynamically exposing ligand-binding sites, could set the stage for the biochemical sensing of the mechanical status of the sarcomere.

Method for isolation of intact titin (connectin) molecules from mammalian cardiac muscle

Cardiac titin was isolated from rabbit and ground squirrel ventricular muscles by a method that was used earlier to obtain myofibrils with intact minor proteins located in A-bands of sarcomeres (Podlubnaya, Z. A., et al. (1989) J. Mol. Biol., 210, 655-658). Small pieces of cardiac muscle were incubated for 2-3 weeks at 4°C in Ca²⁺-depleting solution before their homogenization to decrease activity of Ca²⁺-dependent proteases. Then the muscle was homogenized, and titin was isolated by the method of Soteriou, A., et al. (1993) J. Cell Sci., 14, 119-123. In control experiments, titin was isolated from cardiac muscle without its preincubation in Ca²⁺-depleting solution. Sometimes control titin preparations contained only T2-fragment, but generally they contained ~5-20% N2B-isoform of titin along with its T2-fragment. Preparations of titin obtained from rabbit cardiac muscle by our method contained ~30-50% of N2BA- and N2B-titin isoforms along with its T2-fragment. The content of α-structures in titin isolated by our method was increased. Actomyosin ATPase activity in vitro increased in the presence of titin preparations containing more intact molecules. This result confirms the significant role of titin in the regulation of actin-myosin interaction in muscles. The method used by us to preserve titin might be used for isolation of other proteins that are substrates of Ca²⁺-dependent proteases.

New titin (connectin) isoforms and their functional role in striated muscles of mammals: facts and suppositions

This review summarizes results of our studies on titin isoform composition in vertebrate striated muscles under normal conditions, during hibernation, real and simulated microgravity, and under pathological conditions (stiff-person syndrome, post-apoplectic spasticity, dilated cardiomyopathy, cardiac hypertrophy). Experimental evidence for the existence in mammalian striated muscles of higher molecular weight isoforms of titin (NT-isoforms) in addition to the known N2A-, N2BA-, and N2B-titin isoforms was obtained. Comparative studies of changes in titin isoform composition and structure-functional properties of human and animal striated muscles during adaptive and pathological processes led to a conclusion about the key role of NT-isoforms of titin in maintenance of sarcomere structure and contractile function of these muscles.

Roles of titin in the structure and elasticity of the sarcomere

The giant protein titin is thought to play major roles in the assembly and function of muscle sarcomeres. Structural details, such as widths of Z- and M-lines and periodicities in the thick filaments, correlate with the substructure in the respective regions of the titin molecule. Sarcomere rest length, its operating range of lengths, and passive elastic properties are also directly controlled by the properties of titin. Here we review some recent titin data and discuss its implications for sarcomere architecture and elasticity.

Dynamic light scattering and atomic force microscopy imaging on fragments of beta-connectin from human cardiac muscle

In order to investigate the protein folding-unfolding process, dynamic light scattering (DLS) and atomic force microscopy (AFM) imaging were used to study two fragments of the muscle cardiac protein beta-connectin, also known as titin. Both fragments belong to the I band of the sarcomer, and they are composed of four domains from I(27) to I(30) (tetramer) and eight domains from I(27) to I(34) (octamer). DLS measurements provide the size of both fragments as a function of temperature from 20 up to 86 degrees C, and show a thermal denaturation due to temperature increase. AFM imaging of both fragments in the native state reveals a homogeneous and uniform distribution of comparable structures. The DLS and AFM techniques turn out to be complementary for size measurements of the fragments and fragment aggregates. An unexpected result is that the octamer folds into a smaller structure than the tetramer and the unfolded octamer is also smaller than the unfolded tetramer. This feature seems related to the significance of the hydrophobic interactions between domains of the fragment. The longer the fragment, the more easily the hydrophobic parts of the domains interact with each other. The fragment aggregation behavior, in particular conditions, is also revealed by both DLS and AFM as a process that is parallel to the folding-unfolding transition.

Alignment of a conjugated polymer onto amyloid-like protein fibrils

The amyloid-like fibril is a biomolecular nanowire template of very high stability. Here we describe the coordination of a conjugated polyelectrolyte, poly(thiophene acetic acid) (PTAA), to bovine insulin fibrils with widths of <10 nm and lengths of up to more than 10 microm. Fibrils complexed with PTAA are aligned on surfaces through molecular combing and transfer printing. Single-molecule spectroscopy techniques are applied to chart spectral variation in the emission of these wires. When these results are combined with analysis of the polarization of the emitted light, we can conclude that the polymer chains are preferentially aligned along the fibrillar axis.

The structural principles of multidomain organization of the giant polypeptide chain of the muscle titin protein: SAXS/WAXS studies during the stretching of oriented titin fibres

Elasticity of titin is a key parameter that determines the mechanical properties of muscle. These include reversibility, i.e., the muscle's capacity to change its length many-fold and return to its original state, and the transduction of passive tension generated by the stretched muscle. The morphology and elastic properties of oriented fibres of titin molecules were studied using SAXS and WAXS (small- and wide-angle X-ray scattering, respectively) and mechanical techniques. We succeeded in obtaining oriented filaments of purified titin suitable for diffraction measurements. Our X-ray data suggest a model of titin as a nanoscale, morphological, and aperiodical array of rigid Ig- and Fn3-type domains covalently connected by conformationally variable short loops. The line group symmetry of the model can be defined as SM with axial translation tau(infinity). Both tension transduction and high elasticity of titin can be explained in terms of crystalline polymer physics. Titin stretching experiments show that each individual titin macromolecule can adopt a novel two-phase state within the fibre. Conversion between high elasticity and strength can be explained as a phase transition under external tension. In the terms of the concept of orientational melting the origin of the functional heterogeneity along the titin strand becomes interpretable.

Persistence length of titin from rabbit skeletal muscles measured with scattering and microrheology techniques

The persistence length of titin from rabbit skeletal muscles was measured using a combination of static and dynamic light scattering, and neutron small angle scattering. Values of persistence length in the range 9-16 nm were found for titin-II, which corresponds to mainly physiologically inelastic A-band part of the protein, and for a proteolytic fragment with 100-nm contour length from the physiologically elastic I-band part. The ratio of the hydrodynamic radius to the static radius of gyration indicates that the proteins obey Gaussian statistics typical of a flexible polymer in a -solvent. Furthermore, measurements of the flexibility as a function of temperature demonstrate that titin-II and the I-band titin fragment experience a similar denaturation process; unfolding begins at 318 K and proceeds in two stages: an initial gradual 50% change in persistence length is followed by a sharp unwinding transition at 338 K. Complementary microrheology (video particle tracking) measurements indicate that the viscoelasticity in dilute solution behaves according to the Flory/Fox model, providing a value of the radius of gyration for titin-II (63 +/- 1 nm) in agreement with static light scattering and small angle neutron scattering results.

The elasticity of single titin molecules using a two-bead optical tweezers assay

Titin is responsible for the passive elasticity of the muscle sarcomere. The mechanical properties of skeletal and cardiac muscle titin were characterized in single molecules using a novel dual optical tweezers assay. Antibody pairs were attached to beads and used to select the whole molecule, I-band, A-band, a tandem-immunoglobulin (Ig) segment, and the PEVK region. A construct from the PEVK region expressing >25% of the full-length skeletal muscle isoform was chemically conjugated to beads and similarly characterized. By elucidating the elasticity of the different regions, we showed directly for the first time, to our knowledge, that two entropic components act in series in the skeletal muscle titin I-band (confirming previous speculations), one associated with tandem-immunoglobulin domains and the other with the PEVK region, with persistence lengths of 2.9 nm and 0.76 nm, respectively (150 mM ionic strength, 22 degrees C). Novel findings were: the persistence length of the PEVK component rose (0.4-2.7 nm) with an increase in ionic strength (15-300 mM) and fell (3.0-0.3 nm) with a temperature increase (10-60 degrees C); stress-relaxation in 10-12-nm steps was observed in the PEVK construct and hysteresis in the native PEVK region. The region may not be a pure random coil, as previously thought, but contains structured elements, possibly with hydrophobic interactions.

Gigantic variety: expression patterns of titin isoforms in striated muscles and consequences for myofibrillar passive stiffness

The giant muscle protein titin has become a focus of research interests in the field of muscle mechanics due to its importance for passive muscle stiffness. Here we summarize research activities leading to current understanding of titin's mechanical role in the sarcomere. We then show how low-porosity polyacrylamide-gel electrophoresis, optimised for resolving megadalton proteins, can identify differences in titin-isoform expression in the hearts of 10 different vertebrate species and in several skeletal muscles of the rabbit. A large variety of titin-expression patterns is apparent, which is analysed in terms of its effect on the passive tension of isolated myofibrils obtained from selected muscle types. We show and discuss evidence indicating that vertebrate striated muscle cells are capable of adjusting their passive stiffness in the following ways: (1) Cardiomyocytes co-express long (N2BA) and short (N2B) titin isoform in the same half-sarcomeres and vary the N2BA:N2B ratio to adjust stiffness. Hearts from different mammalian species vary widely in their N2BA:N2B ratio; right ventricles show higher ratios than left ventricles. There is also a significant gradient of N2BA:N2B ratio in a given heart, from basal to apical; transmural ratio differences are less distinct. (2) Skeletal muscles can express longer or shorter I-band-titin (N2A-isoform) to achieve lower or higher titin-derived stiffness, respectively. (3) Some skeletal muscles co-express longer (N2A(L)) and shorter (N2A(S)) titin isoforms, also at the single-fibre level (e.g., rabbit psoas); variations in overall N2A(L):N2A(S) ratio may add to the fine-tuning of titin-based stiffness in the whole muscle. Whereas it is established that titin, together with extracellular collagen, determines the passive tension at physiological sarcomere lengths in cardiac muscle, it remains to be seen to which degree titin and/or extracellular structures are important for the physiological passive-tension generation of whole skeletal muscle.

Calcium-dependent molecular spring elements in the giant protein titin

Titin (also known as connectin) is a giant protein with a wide range of cellular functions, including providing muscle cells with elasticity. Its physiological extension is largely derived from the PEVK segment, rich in proline (P), glutamate (E), valine (V), and lysine (K) residues. We studied recombinant PEVK molecules containing the two conserved elements: approximately 28-residue PEVK repeats and E-rich motifs. Single molecule experiments revealed that calcium-induced conformational changes reduce the bending rigidity of the PEVK fragments, and site-directed mutagenesis identified four glutamate residues in the E-rich motif that was studied (exon 129), as critical for this process. Experiments with muscle fibers showed that titin-based tension is calcium responsive. We propose that the PEVK segment contains E-rich motifs that render titin a calcium-dependent molecular spring that adapts to the physiological state of the cell.

Fibrillin microfibrils are stiff reinforcing fibres in compliant tissues

Fibrillin-rich microfibrils have endowed tissues with elasticity throughout multicellular evolution. We have used molecular combing techniques to determine Young's modulus for individual microfibrils and X-ray diffraction of zonular filaments of the eye to establish the linearity of microfibril periodic extension. Microfibril periodicity is not altered at physiological zonular tissue extensions and Young's modulus is between 78 MPa and 96 MPa, which is two orders of magnitude stiffer than elastin. We conclude that elasticity in microfibril-containing tissues arises primarily from reversible alterations in supra-microfibrillar arrangements rather than from intrinsic elastic properties of individual microfibrils which, instead, act as reinforcing fibres in fibrous composite tissues.

Titin: properties and family relationships

In striated muscles, the rapid production of macroscopic levels of force and displacement stems directly from highly ordered and hierarchical protein organization, with the sarcomere as the elemental contractile unit. There is now a wealth of evidence indicating that the giant elastic protein titin has important roles in controlling the structure and extensibility of vertebrate muscle sarcomeres.

Stretching and visualizing titin molecules: combining structure, dynamics and mechanics

The details of the global and local structure and function of titin, a giant filamentous intrasarcomeric protein are largely undiscovered. Here we discuss a combination of bulk-solution and novel single-molecule techniques that may lend unique insights into titin's molecular dynamic, structural and mechanical characteristics.

The supramolecular organization of collagen VI microfibrils

Collagen VI has a ubiquitous distribution throughout connective tissues, and has key roles in linking cells and matrix macromolecules. We have generated three-dimensional reconstructions of collagen VI microfibrils using automated electron tomography (AET) in order to obtain new insights into the organisation of collagen VI in assembled microfibrils. Analysis of the reconstruction data has allowed the resolution of the double-beaded structure into smaller subunits. Volume calculations from the tomography data indicate that ten and six A-domains could be packed into the N and C-terminal regions from each monomer, respectively. A putative location for the globular N-terminal regions of the alpha3 chain, important for microfibril assembly and function, has been identified. Some surfaces of the alpha3 chain N-terminal domains appear to be exposed on the surface of a microfibril, where they may provide an interactive surface for molecules. Analysis of the interbead region provides evidence for complex triple helical supercoiling in microfibrils. Frequently, two strands were visualised emerging from the beaded region and merging into a single interbead region. Measurements taken from the AET data show that there is a decrease in periodicity from dimer/tetramer to microfibrils. Molecular combing reverses this effect by mechanically increasing periodicity to give measurements similar to the component dimers/tetramers. Together, these data have provided important new insights into the organisation and function of these large macromolecular assemblies.

Mechanics and structure of titin oligomers explored with atomic force microscopy

Titin is a giant polypeptide that spans half of the striated muscle sarcomere and generates passive force upon stretch. To explore the elastic response and structure of single molecules and oligomers of titin, we carried out molecular force spectroscopy and atomic force microscopy (AFM) on purified full-length skeletal-muscle titin. From the force data, apparent persistence lengths as long as approximately 1.5 nm were obtained for the single, unfolded titin molecule. Furthermore, data suggest that titin molecules may globally associate into oligomers which mechanically behave as independent wormlike chains (WLCs). Consistent with this, AFM of surface-adsorbed titin molecules revealed the presence of oligomers. Although oligomers may form globally via head-to-head association of titin, the constituent molecules otherwise appear independent from each other along their contour. Based on the global association but local independence of titin molecules, we discuss a mechanical model of the sarcomere in which titin molecules with different contour lengths, corresponding to different isoforms, are held in a lattice. The net force response of aligned titin molecules is determined by the persistence length of the tandemly arranged, different WLC components of the individual molecules, the ratio of their overall contour lengths, and by domain unfolding events. Biased domain unfolding in mechanically selected constituent molecules may serve as a compensatory mechanism for contour- and persistence-length differences. Variation in the ratio and contour length of the component chains may provide mechanisms for the fine-tuning of the sarcomeric passive force response.

Hidden complexity in the mechanical properties of titin

Individual molecules of the giant protein titin span the A-bands and I-bands that make up striated muscle. The I-band region of titin is responsible for passive elasticity in such muscle, and contains tandem arrays of immunoglobulin domains. One such domain (I27) has been investigated extensively, using dynamic force spectroscopy and simulation. However, the relevance of these studies to the behaviour of the protein under physiological conditions was not established. Force studies reveal a lengthening of I27 without complete unfolding, forming a stable intermediate that has been suggested to be an important component of titin elasticity. To develop a more complete picture of the forced unfolding pathway, we use mutant titins--certain mutations allow the role of the partly unfolded intermediate to be investigated in more depth. Here we show that, under physiological forces, the partly unfolded intermediate does not contribute to mechanical strength. We also propose a unified forced unfolding model of all I27 analogues studied, and conclude that I27 can withstand higher forces in muscle than was predicted previously.

Reverse engineering of the giant muscle protein titin

Through the study of single molecules it has become possible to explain the function of many of the complex molecular assemblies found in cells. The protein titin provides muscle with its passive elasticity. Each titin molecule extends over half a sarcomere, and its extensibility has been studied both in situ and at the level of single molecules. These studies suggested that titin is not a simple entropic spring but has a complex structure-dependent elasticity. Here we use protein engineering and single-molecule atomic force microscopy to examine the mechanical components that form the elastic region of human cardiac titin. We show that when these mechanical elements are combined, they explain the macroscopic behaviour of titin in intact muscle. Our studies show the functional reconstitution of a protein from the sum of its parts.

Sarcomeric visco-elasticity of chemically skinned skeletal muscle fibres of the rabbit at rest

The giant muscle protein titin (connectin), contained in the gap filament that connect a thick filament to the Z-line in a sarcomere, is generally considered to be responsible for the passive force (tension) and visco-elasticity in resting striated muscle. However, whether it can account for all the features of the resting tension response remains unclear. In this paper, we examine the basic features of the 'sarcomeric visco-elasticity' in a single resting mammalian muscle fibre and attempt to account for various tension components on the basis of known structural features of a sarcomere. At sarcomere length of approximately 2.6 microm, the force response to a ramp stretch of 2-5% is complex but can be resolved into four functionally different components. The behaviour displayed by the components ranges from pure viscous type (directly proportional to stretch velocity, ranging from 0.1 to 30 lengths s(-1)) to predominantly elastic type (insensitive to stretch velocity at 1-2 s time scale); simulations show two components of visco-elasticity with characteristically different relaxation times. The velocity-sensitive components (only) are enhanced by filament lattice compression (dextran - 500 kD) and by increased medium viscosity (dextran - 12 kD); also, the relaxation time of visco-elasticity is longer with increased medium viscosity. Amplitude of all the components and the relaxation time of visco-elasticity are increased at longer sarcomere length (range approximately 2.5 - 3.0 microm). The study, and quantitative analyses, extend our previous work on intact muscle fibres and suggest that the velocity-sensitive tension components in intact sarcomere arise from interactions between sarcomeric filaments, filament segments and inter-filamentary medium; the two components of visco-elasticity arise from distinct regions of titin (connectin) molecules.

Role of titin in vertebrate striated muscle

Titin is a giant muscle protein with a molecular weight in the megaDalton range and a contour length of more than 1 microm. Its size and location within the sarcomere structure determine its important role in the mechanism of muscle elasticity. According to the current consensus, elasticity stems directly from more than one type of spring-like behaviour of the I-band portion of the molecule. Starting from slack length, extension of the sarcomere first causes straightening of the molecule. Further extension then induces local unfolding of a unique sequence, the PEVK region, which is named due to the preponderance of these amino-acid residues. High speeds of extension and/or high forces are likely to lead to unfolding of the beta-sandwich domains from which the molecule is mainly constructed. A release of tension leads to refolding and recoiling of the polypeptide. Here, we review the literature and present new experimental material related to the role of titin in muscle elasticity. In particular, we analyse the possible influence of the arrangement and environment of titin within the sarcomere structure on its extensible behaviour. We suggest that, due to the limited conformational space, elongation and compression of the molecule within the sarcomere occur in a more ordered way or with higher viscosity and higher forces than are observed in solution studies of the isolated protein.

Interaction between PEVK-titin and actin filaments: origin of a viscous force component in cardiac myofibrils

The giant muscle protein titin contains a unique sequence, the PEVK domain, the elastic properties of which contribute to the mechanical behavior of relaxed cardiomyocytes. Here, human N2-B-cardiac PEVK was expressed in Escherichia coli and tested-along with recombinant cardiac titin constructs containing immunoglobulin-like or fibronectin-like domains-for a possible interaction with actin filaments. In the actomyosin in vitro motility assay, only the PEVK construct inhibited actin filament sliding over myosin. The slowdown occurred in a concentration-dependent manner and was accompanied by an increase in the number of stationary actin filaments. High [Ca(2+)] reversed the PEVK effect. PEVK concentrations >/=10 microgram/mL caused actin bundling. Actin-PEVK association was found also in actin fluorescence binding assays without myosin at physiological ionic strength. In cosedimentation assays, PEVK-titin interacted weakly with actin at 0 degrees C, but more strongly at 30 degrees C, suggesting involvement of hydrophobic interactions. To probe the interaction in a more physiological environment, nonactivated cardiac myofibrils were stretched quickly, and force was measured during the subsequent hold period. The observed force decline could be fit with a three-order exponential-decay function, which revealed an initial rapid-decay component (time constant, 4 to 5 ms) making up 30% to 50% of the whole decay amplitude. The rapid, viscous decay component, but not the slower decay components, decreased greatly and immediately on actin extraction with Ca(2+)-independent gelsolin fragment, both at physiological sarcomere lengths and beyond actin-myosin overlap. Steady-state passive force dropped only after longer exposure to gelsolin. We conclude that interaction between PEVK-titin and actin occurs in the sarcomere and may cause viscous drag during diastolic stretch of cardiac myofibrils. The interaction could also oppose shortening during contraction.

Multiple conformations of PEVK proteins detected by single-molecule techniques

An important component of muscle elasticity is the PEVK region of titin, so named because of the preponderance of these amino acids. However, the PEVK region, similar to other elastomeric proteins, is thought to form a random coil and therefore its structure cannot be determined by standard techniques. Here we combine single-molecule electron microscopy and atomic force microscopy to examine the conformations of the human cardiac titin PEVK region. In contrast to a simple random coil, we have found that cardiac PEVK shows a wide range of elastic conformations with end-to-end distances ranging from 9 to 24 nm and persistence lengths from 0.4 to 2.5 nm. Individual PEVK molecules retained their distinctive elastic conformations through many stretch-relaxation cycles, consistent with the view that these PEVK conformers cannot be interconverted by force. The multiple elastic conformations of cardiac PEVK may result from varying degrees of proline isomerization. The single-molecule techniques demonstrated here may help elucidate the conformation of other proteins that lack a well-defined structure.

Flexibility and extensibility in the titin molecule: analysis of electron microscope data

Muscle elasticity derives directly from titin extensibility, which stems from three distinct types of spring-like behaviour of the I-band portion of the molecule. With progressively greater forces and sarcomere lengths, the molecule straightens and then unfolds, first in the PEVK-region and then in individual immunoglobulin domains. Here, we report quantitative analysis of flexibility and extensibility in isolated titin molecules visualized by electron microscopy. Conformations displayed by molecules dried on a substrate vary from a random coil to rod-like, demonstrating highly flexible and easily deformable tertiary structure. The particular conformation observed depends on the "wettability" of the substrate during specimen preparation: higher wettability favours coiled conformations, whereas lower wettability results in more extended molecules. Extension is shown to occur during liquid dewetting. Statistical methods of conformational analysis applied to a population of coiled molecules gave an average persistence length 13.5(+/-4.5) nm. The close correspondence of this value to an earlier one from light-scattering studies confirms that conformations observed by microscopy closely reflected the equilibrium conformation in solution. Analysis of hydrodynamic forces exerted during dewetting also indicates that the force causing straightening of the molecules and extension of the PEVK-region is in the picoNewton range, whereas unfolding of the immunoglobulin and fibronectin domains may require forces about tenfold higher. The microscope data directly illustrate the relationship between titin conformation and the magnitude of applied force. They also suggest the presence of torsional stiffness in the molecule, which may affect considerations of elasticity.

Identification of new repeating motifs in titin

Repeating motifs of 26-28 amino acids have been identified in the PEVK region of the giant elastic protein titin. These motifs, termed PPAK for the four amino acids that often constitute the beginning of the motif, occur 60 times in human soleus titin. PPAK motifs occur in groups of 2-12 that are separated by regions rich in glutamic acid (approximately 45%) and termed polyE segments. The fluctuation of the net charge between the PPAK and polyE regions suggests ionic interactions between these segments and their involvement in the elastic function of titin. Proteins 2001;43:145-149.

Extensibility in the titin molecule and its relation to muscle elasticity

Studies of the origins of muscle passive tension have revealed a direct relationship between elasticity and the mechanical properties of the titin molecule. 'Molecular combing' has made it possible to visualize with high resolution changes in the configuration and structure of isolated titin caused by mechanical forces. The differential extensibility seen in individual molecules is consistent with the important role suggested for the PEVK-region in muscle elasticity. An additional factor emphasizing compliance of this part of the molecule in muscle may relate to the arrangement of the titin filament system in the sarcomere, in particular to titin interactions with thick and thin filaments. The branching of titin network near the PEVK-region suggests that, in addition to conferring extensibility, it may also be important in facilitating the transition of titin intermolecular interactions between the arrays of thick and thin filaments.

Titin elasticity in the context of the sarcomere: force and extensibility measurements on single myofibrils

Skeletal-muscle titin contains in its I-band section two main elastic elements, stretches of Ig-like domains and the PEVK segment. Both elements contribute to the extensibility and passive force development of relaxed skeletal muscle fibers during stretch. To explore the nature of elasticity of the segments, their force-extension relation was determined with immunofluorescence and immunoelectron microscopy, combined with isolated myofibril mechanics. The results were then fitted with recent models of biopolymer elasticity. Whereas an entropic-spring mechanism may account for the elasticity of the Ig-domain segments, PEVK-titin elasticity appears to have both entropic and enthalpic origins. The modeling explains why the two elements extend sequentially upon stretch: elongation of the Ig-domain regions (with folded modules) is followed by unraveling of the PEVK domain. I-band titin in cardiac muscle is expressed in two main isoforms, N2-A and N2-B. The N2-A isoform is similar to that found in skeletal muscle, whereas the N2-B titin is distinguished by cardiac-specific Ig-motifs and nonmodular sequences within the central I-band section. By examining the extensibility of N2-B titin, it was found that this isoform extends by recruiting three distinct elastic elements: poly-Ig regions and the PEVK domain at low to modest stretch, and in addition, a unique 572-residue sequence insertion at higher physiological stretch. Extension of all three elements allows cardiac titin to stretch fully reversibly at physiological sarcomere lengths, without the need to unfold individual Ig domains.

Differential expression of cardiac titin isoforms and modulation of cellular stiffness

Extension of the I-band segment of titin gives rise to part of the diastolic force of cardiac muscle. Previous studies of human cardiac titin transcripts suggested a series of differential splicing events in the I-band segment of titin leading to the so-called N2A and N2B isoform transcripts. Here we investigated titin expression at the protein level in a wide range of mammalian species. Results indicate that the myocardium coexpresses 2 distinct titin isoforms: a smaller isoform containing the N2B element only (N2B titin) and a larger isoform with both the N2B and N2A elements (N2BA titin). The expression ratio of large N2BA to small N2B titin isoforms was found to vary greatly in different species; eg, in the left ventricle the ratio is approximately 0.05 in mouse and approximately 1.5 in pig. Differences in the expression ratio were also found between atria and ventricles and between different layers of the ventricular wall. Immunofluorescence experiments with isoform-specific antibodies suggest that coexpression of these isoforms takes place at the single-myocyte level. The diastolic properties of single cardiac myocytes isolated from various species expressing high levels of the small (rat and mouse) or large (pig) titin isoform were studied. On average, pig myocytes are significantly less stiff than mouse and rat myocytes. Gel analysis indicates that this result cannot be explained by varying amounts of titin in mouse and pig myocardium. Rather, low stiffness of pig myocytes can be explained by its high expression level of the large isoform: the longer extensible region of this isoform results in a lower fractional extension for a given sarcomere length and hence a lower force. Implications of our findings to cardiac function are discussed.

Titin: a molecular control freak

Recent studies of the giant protein titin have shed light on its roles in muscle assembly and elasticity and include the surprising findings described here. We now know that the titin kinase domain, which has long been a puzzle, has a novel regulation mechanism. A substrate, telethonin, has been identified that is located over one micron away from the kinase domain in mature muscle. Single-molecule studies have demonstrated the fascinating process of reversible mechanical unfolding of titin. Lastly, and most surprisingly, it has been claimed that titin controls assembly and elasticity in chromosomes.

A kinetic molecular model of the reversible unfolding and refolding of titin under force extension

Molecular elasticity is a physicomechanical property that is associated with a select number of polypeptides and proteins, such as the giant muscle protein, titin, and the extracellular matrix protein, tenascin. Both proteins have been the subject of atomic force microscopy (AFM), laser tweezer, and other in vitro methods for examining the effects of force extension on the globular (FNIII/Ig-like) domains that comprise each protein. In this report we present a time-dependent method for simulating AFM force extension and its effect on FNIII/Ig domain unfolding and refolding. This method treats the unfolding and refolding process as a standard three-state protein folding model (U right arrow over left arrow T right arrow over left arrow F, where U is the unfolded state, T is the transition or intermediate state, and F is the fully folded state), and integrates this approach within the wormlike chain (WLC) concept. We simulated the effect of AFM tip extension on a hypothetical titin molecule comprised of 30 globular domains (Ig or FNIII) and 25% Pro-Glu-Val-Lys (PEVK) content, and analyzed the unfolding and refolding processes as a function of AFM tip extension, extension rate, and variation in PEVK content. In general, we find that the use of a three-state protein-folding kinetic-based model and the implicit inclusion of PEVK domains can accurately reproduce the experimental force-extension curves observed for both titin and tenascin proteins. Furthermore, our simulation data indicate that PEVK domains exhibit extensibility behavior, assist in the unfolding and refolding of FNIII/Ig domains in the titin molecule, and act as a force "buffer" for the FNIII/Ig domains, particularly at low and moderate extension forces.