Automated image acquisition for single-particle reconstruction using p97 as the biological sample

Assessing the capabilities of a 4kx4k CCD camera for electron cryo-microscopy at 300kV

CCD cameras have numerous advantages over photographic film for detecting electrons; however the point spread function of these cameras has not been sufficient for single particle data collection to subnanometer resolution with 300kV microscopes. We have adopted spectral signal to noise ratio (SNR) as a parameter for assessing detector quality for single particle imaging. The robustness of this parameter is confirmed under a variety of experimental conditions. Using this parameter, we demonstrate that the SNR of images of either amorphous carbon film or ice embedded virus particles collected on a new commercially available 4kx4k CCD camera are slightly better than photographic film at low spatial frequency (<1/5 Nyquist frequency), and as good as photographic film out to half of the Nyquist frequency. In addition it is slightly easier to visualize ice embedded particles on this CCD camera than on photographic film. Based on this analysis it is realistic to collect images containing subnanometer resolution data (6-9A) using this CCD camera at an effective magnification of approximately 112000x on a 300kV electron microscope.

Cryo-electron microscopy of biological samples

A brief summary of current cryo-electron microscopy methods for processing and imaging biological tissues is provided. The main emphasis is given to two preparation procedures: frozen-hydrated samples because of the remarkable success of cryo-electron crystallography in obtaining near atomic resolution of integral membrane proteins, and high-pressure freezing because of the wide applicability for vitrification of large samples of normal and diseased tissues for ultrastructural and immunolabeling analysis. Methods for examining certain samples with a TEM cryo-stage are summarized. This includes an introduction to the relatively new area of cryo-electron tomography, which offers the possibility to observe the three-dimensional structure of subcellular components using only their natural variations in composition to generate contrast.

Automated molecular microscopy: the new Leginon system

We report here on the current state of our efforts in automated molecular microscopy. Our primary automated data acquisition software system, Leginon, has been completely redesigned over the past two years. The new distributed system has been developed using the Python programming language and is compatible with both Linux and Windows operating systems. The new flexible architecture was designed to allow for the development of customized data collection protocols, several of which are described here. The system has been used to acquire data for approximately 150 experiments and we have demonstrated the capacity for high throughput data acquisition by acquiring images of more than 100,000 particles in a single session at the microscope.

Werner syndrome protein directly binds to the AAA ATPase p97/VCP in an ATP-dependent fashion

We have previously shown that the Werner syndrome helicase, WRNp, a member of the RecQ helicase family, forms a tight molecular complex with the p97/Valosin containing protein (VCP), a member of the AAA (ATPases associated with diverse cellular activities) family of proteins. This interaction is disrupted by chemical agents that confer DNA damage, suggesting that VCP plays an important role in the signal-dependent release of WRNp from its nucleolar sequestration site. Here, we characterized the structural requirements for interactions between WRNp and VCP and for the nuclear localization of VCP. We discovered that VCP directly binds to the RQC (RecQ conserved) domain of WRNp, which is a highly conserved motif common to the RecQ helicase family. This interaction is ATP-dependent, suggesting that VCP plays a mechanistic role in releasing WRNp from the nucleolus. Immunohistochemical analysis of various VCP domains and mutated proteins expressed in vitro demonstrated that VCP may contain several hierarchical cellular localization motifs within its domain structure.

A 9 angstroms single particle reconstruction from CCD captured images on a 200 kV electron cryomicroscope

Sub-nanometer resolution structure determination is becoming a common practice in electron cryomicroscopy of macromolecular assemblies. The data for these studies have until now been collected on photographic film. Using cytoplasmic polyhedrosis virus (CPV), a previously determined structure, as a test specimen, we show the feasibility of obtaining a 9 angstroms structure from images acquired from a 4 k x 4 k Gatan CCD on a 200 kV electron cryomicroscope. The match of the alpha-helices in the protein components of the CPV with the previous structure of the same virus validates the suitability of this type of camera as the recording media targeted for single particle reconstructions at sub-nanometer resolution.

Automated three-dimensional reconstruction of keyhole limpet hemocyanin type 1

We have reconstructed a three-dimensional map of keyhole limpet hemocyanin isoform 1 (KLH1), using our automated data collection software, Leginon, integrated with particle selection algorithms, and the SPIDER reconstruction package. KLH1, a 7.9 MDa macromolecule, is an extracellular respiratory pigment composed of two asymmetric decamers, and presents an overall D(5) point-group symmetry. The reconstruction is in agreement with previous data published on molluscan hemocyanins. The reconstructed map (11.3A resolution, 3sigma criterion) was used to fit an available X-ray crystallography structure of Octopus dofleini Odg, solved at 2.3A [J. Mol. Biol. 278 (4) (1998) 855], with satisfactory results. The results validate the approach of automating the cryoEM process and demonstrate that the quality of the images acquired and the particles selected is comparable to those obtained using manual methods. Several problems remain to be solved however before these results can be generalized.

Electron cryo-microscopy of VAT, the archaeal p97/CDC48 homologue from Thermoplasma acidophilum

VAT (valosine containing protein-like ATPase from Thermoplasma acidophilum), an archaeal member of the AAA-family (ATPases associated with a variety of cellular activities) that possesses foldase as well as unfoldase-activity, forms homo-hexameric rings like its eukaryotic homologues p97 and CDC48. The VAT-monomer exhibits the tripartite domain architecture typical for type II AAA-ATPases: N-D1-D2, whereby N is the substrate binding N-terminal domain preceding domains D1 and D2, both containing AAA-modules. Recent 3-D reconstructions of VAT and p97 as obtained by electron microscopy suffer from weakly represented N-domains, probably a consequence of their flexible linkage to the hexameric core. Here we used electron cryo-microscopy and 3-D reconstruction of single particles in order to generate a 3-D model of VAT at 2.3 nm resolution. The hexameric core of the VAT-complex (diameter 13.2 nm, height 8.4 nm) encloses a central cavity and the substrate-binding N-domains are clearly arranged in the upper periphery. Comparison with the p97 3-D reconstruction and the recently determined crystal structure of p97-N-D1 suggests a tail-to-tail arrangement of D1 and D2 in VAT.