Purification and characterization of human erythrocyte glucose transporter in decylmaltoside detergent solution

Substrate translocation and inhibition in human dicarboxylate transporter NaDC3

The human high-affinity sodium-dicarboxylate cotransporter (NaDC3) imports various substrates into the cell as tricarboxylate acid cycle intermediates, lipid biosynthesis precursors and signaling molecules. Understanding the cellular signaling process and developing inhibitors require knowledge of the structural basis of the dicarboxylate specificity and inhibition mechanism of NaDC3. To this end, we determined the cryo-electron microscopy structures of NaDC3 in various dimers, revealing the protomer in three conformations: outward-open Co, outward-occluded Coo and inward-open Ci. A dicarboxylate is first bound and recognized in Co and how the substrate interacts with NaDC3 in Coo likely helps to further determine the substrate specificity. A phenylalanine from the scaffold domain interacts with the bound dicarboxylate in the Coo state and modulates the kinetic barrier to the transport domain movement. Structural comparison of an inhibitor-bound structure of NaDC3 to that of the sodium-dependent citrate transporter suggests ways for making an inhibitor that is specific for NaDC3.

Structural basis of ion - substrate coupling in the Na+-dependent dicarboxylate transporter VcINDY

The Na+-dependent dicarboxylate transporter from Vibrio cholerae (VcINDY) is a prototype for the divalent anion sodium symporter (DASS) family. While the utilization of an electrochemical Na+ gradient to power substrate transport is well established for VcINDY, the structural basis of this coupling between sodium and substrate binding is not currently understood. Here, using a combination of cryo-EM structure determination, succinate binding and site-directed cysteine alkylation assays, we demonstrate that the VcINDY protein couples sodium- and substrate-binding via a previously unseen cooperative mechanism by conformational selection. In the absence of sodium, substrate binding is abolished, with the succinate binding regions exhibiting increased flexibility, including HPinb, TM10b and the substrate clamshell motifs. Upon sodium binding, these regions become structurally ordered and create a proper binding site for the substrate. Taken together, these results provide strong evidence that VcINDY's conformational selection mechanism is a result of the sodium-dependent formation of the substrate binding site.

Screening of Detergents for Stabilization of Functional Membrane Proteins

Membrane protein studies usually require use of detergents to extract and isolate proteins from membranes and manipulate them in a soluble context for their functional or structural characterization. However, solubilization with detergent may interfere with MP stability and may directly affect MP function or structure. Moreover, detergent properties can be affected such as critical micellar concentration (CMC) can be affected by the experimental conditions. Consequently, the experimenter must pay attention to both the protein and the behavior of the detergent. This article provides a convenient protocol for estimating the CMC of detergents in given experimental conditions. Then, it presents two protocols aimed at monitoring the function of a membrane protein in the presence of detergent. Such experiments may help to test various detergents for their inactivating or stabilizing effects on long incubation times, ranging from few hours to some days. © 2018 by John Wiley & Sons, Inc.

Crystallization and Structural Determination of the Human Glucose Transporters GLUT1 and GLUT3

Overexpression, purification, and crystallization of eukaryotic membrane proteins represent a major challenge for structural biology. In recent years, we have solved the crystal structures of the human glucose transporters GLUT1 in the inward-open conformation at 3.17 Å resolution and GLUT3 in the outward-open and occluded conformations at 2.4 and 1.5 Å resolutions, respectively. Structural elucidation of these transporters in three distinct functional states reveal the molecular basis for the alternating access transport cycle of this prototypal solute carrier family. It established the molecular foundation for future dynamic and kinetic investigations of these GLUTs, and will likely facilitate structure-based ligand development. In this chapter, we present the detailed protocols of recombinant protein expression, purification, and crystallization of GLUT1 and GLUT3, which may help the pursuit of structural elucidation of other eukaryotic membrane proteins.

Lessons from an α-Helical Membrane Enzyme: Expression, Purification, and Detergent Optimization for Biophysical and Structural Characterization

This chapter outlines the protocol developed in our lab to produce a multipass α-helical membrane protein. We present our work flow, from ortholog selection to protein purification, including molecular biology for plasmid construction, protein expression in E. coli, membrane isolation and detergent solubilization, protein purification and tag removal, biophysical assessment of protein stability in different detergents, and detergent concentration determination using thin-layer chromatography. We focus on results from our ongoing work with intramembrane aspartyl proteases from archaeal organisms.

Expression, purification, and functional characterization of the insulin-responsive facilitative glucose transporter GLUT4

The insulin-responsive facilitative glucose transporter GLUT4 is of fundamental importance for maintenance of glucose homeostasis. Despite intensive effort, the ability to express and purify sufficient quantities of structurally and functionally intact protein for biophysical analysis has previously been exceedingly difficult. We report here the development of novel methods to express, purify, and functionally reconstitute GLUT4 into detergent micelles and proteoliposomes. Rat GLUT4 containing FLAG and His tags at the amino and carboxy termini, respectively, was engineered and stably transfected into HEK-293 cells. Overexpression in suspension culture yielded over 1.5 mg of protein per liter of culture. Systematic screening of detergent solubilized GLUT4-GFP fusion protein via fluorescent-detection size exclusion chromatography identified lauryl maltose neopentyl glycol (LMNG) as highly effective for isolating monomeric GLUT4 micelles. Preservation of structural integrity and ligand binding was demonstrated via quenching of tryptophan fluorescence and competition of ATB-BMPA photolabeling by cytochalasin B. GLUT4 was reconstituted into lipid nanodiscs and proper folding was confirmed. Reconstitution of purified GLUT4 with amphipol A8-35 stabilized the transporter at elevated temperatures for extended periods of time. Functional activity of purified GLUT4 was confirmed by reconstitution of LMNG-purified GLUT4 into proteoliposomes and measurement of saturable uptake of D-glucose over L-glucose. Taken together, these data validate the development of an efficient means to generate milligram quantities of stable and functionally intact GLUT4 that is suitable for a wide array of biochemical and biophysical analyses.

Purification of a Multidrug Resistance Transporter for Crystallization Studies

Crystallization of integral membrane proteins is a challenging field and much effort has been invested in optimizing the overexpression and purification steps needed to obtain milligram amounts of pure, stable, monodisperse protein sample for crystallography studies. Our current work involves the structural and functional characterization of the Escherichia coli multidrug resistance transporter MdtM, a member of the major facilitator superfamily (MFS). Here we present a protocol for isolation of MdtM to increase yields of recombinant protein to the milligram quantities necessary for pursuit of structural studies using X-ray crystallography. Purification of MdtM was enhanced by introduction of an elongated His-tag, followed by identification and subsequent removal of chaperonin contamination. For crystallization trials of MdtM, detergent screening using size exclusion chromatography determined that decylmaltoside (DM) was the shortest-chain detergent that maintained the protein in a stable, monodispersed state. Crystallization trials of MdtM performed using the hanging-drop diffusion method with commercially available crystallization screens yielded 3D protein crystals under several different conditions. We contend that the purification protocol described here may be employed for production of high-quality protein of other multidrug efflux members of the MFS, a ubiquitous, physiologically and clinically important class of membrane transporters.

Comparative studies on detergent-assisted apocytochrome b6 reconstitution into liposomal bilayers monitored by Zetasizer instruments

The present paper is a systematic, comparative study on the reconstitution of an apocytochrome b6 purified from a heterologous system using a detergent-free method and reconstitution into liposomes performed using three different detergents: SDS, Triton X-100 and DM, and two methods of detergent removal by dialysis and using Bio-Beads. The product size, its distribution and zeta potential, and other parameters were monitored throughout the process. We found that zeta potential of proteoliposomes is correlated with reconstitution efficiency and, as such, can serve as a quick and convenient quality control for reconstitution experiments. We also advocate using detergent-free protein purification methods as they allow for an unfettered choice of detergent for reconstitution, which is the most crucial factor influencing the final product parameters.

Identification of the dimer interface of a bacterial Ca(2+)/H(+) antiporter

Members of the calcium/cation antiporter superfamily, including the cardiac sodium/calcium exchangers, are secondary active transporters that play an essential role in cellular Ca(2+) homeostasis. A notable feature of this group of transporters is the high levels of sequence similarity in relatively short sequences constituting the functionally important α-1 and α-2 regions in contrast to relatively lower degrees of similarity in the extended adjoining sequences. This suggests a similar structure and function of core transport machinery but possible differences in topology and/or oligomerization, a topic that has not been adequately addressed. Here we present the first example of purification of a bacterial member of this superfamily (CAX(CK31)) and analyze its quaternary structure. Purification of CAX(CK31) required the presence of a choline headgroup-containing detergent or lipid to yield stable preparations of the monomeric transporter. H(+)-driven Ca(2+) transport was demonstrated by reconstituting purified CAX(CK31) into liposomes. Dimeric CAX(CK31) could be isolated by manipulation of detergent micelles. Dimer formation was shown to be dependent on micelle composition as well as protein concentration. Furthermore, we establish that CAX(CK31) forms dimers in the membrane by analysis of cross-linked proteins. Using a dimeric homology model derived from the monomeric structure of the archaeal NCX homologue (Protein Data Bank entry 3V5U ), we introduced cysteine residues and through cross-linking experiments established the role of transmembrane helices 2 and 6 in the putative dimer interface.

Structure and mechanism of a bacterial sodium-dependent dicarboxylate transporter

In human cells, cytosolic citrate is a chief precursor for the synthesis of fatty acids, triacylglycerols, cholesterol and low-density lipoprotein. Cytosolic citrate further regulates the energy balance of the cell by activating the fatty-acid-synthesis pathway while downregulating both the glycolysis and fatty-acid β-oxidation pathways. The rate of fatty-acid synthesis in liver and adipose cells, the two main tissue types for such synthesis, correlates directly with the concentration of citrate in the cytosol, with the cytosolic citrate concentration partially depending on direct import across the plasma membrane through the Na(+)-dependent citrate transporter (NaCT). Mutations of the homologous fly gene (Indy; I'm not dead yet) result in reduced fat storage through calorie restriction. More recently, Nact (also known as Slc13a5)-knockout mice have been found to have increased hepatic mitochondrial biogenesis, higher lipid oxidation and energy expenditure, and reduced lipogenesis, which taken together protect the mice from obesity and insulin resistance. To understand the transport mechanism of NaCT and INDY proteins, here we report the 3.2 Å crystal structure of a bacterial INDY homologue. One citrate molecule and one sodium ion are bound per protein, and their binding sites are defined by conserved amino acid motifs, forming the structural basis for understanding the specificity of the transporter. Comparison of the structures of the two symmetrical halves of the transporter suggests conformational changes that propel substrate translocation.

Simple screening method for improving membrane protein thermostability

Biochemical and biophysical analysis on integral membrane proteins often requires monodisperse and stable protein samples. Here we describe a method to characterize protein thermostability by measuring its melting temperature in detergent using analytical size-exclusion chromatography. This quantitative method can be used to screen for compounds and conditions that stabilize the protein. With this technique we were able to assess and improve the thermostability of several membrane proteins. These conditions were in turn used to assist purification, to identify protein ligand and to improve crystal quality.

Bridging the gap: a GFP-based strategy for overexpression and purification of membrane proteins with intra and extracellular C-termini

Low expression and instability during isolation are major obstacles preventing adequate structure-function characterization of membrane proteins (MPs). To increase the likelihood of generating large quantities of protein, C-terminally fused green fluorescent protein (GFP) is commonly used as a reporter for monitoring expression and evaluating purification. This technique has mainly been restricted to MPs with intracellular C-termini (C(in)) due to GFP's inability to fluoresce in the Escherichia coli periplasm. With the aid of Glycophorin A, a single transmembrane spanning protein, we developed a method to convert MPs with extracellular C-termini (C(out)) to C(in) ones providing a conduit for implementing GFP reporting. We tested this method on eleven MPs with predicted C(out) topology resulting in high level expression. For nine of the eleven MPs, a stable, monodisperse protein-detergent complex was identified using an extended fluorescence-detection size exclusion chromatography procedure that monitors protein stability over time, a critical parameter affecting the success of structure-function studies. Five MPs were successfully cleaved from the GFP tag by site-specific proteolysis and purified to homogeneity. To address the challenge of inefficient proteolysis, we explored expression and purification conditions in the absence of the fusion tag. Contrary to previous studies, optimal expression conditions established with the fusion were not directly transferable for overexpression in the absence of the GFP tag. These studies establish a broadly applicable method for GFP screening of MPs with C(out) topology, yielding sufficient protein suitable for structure-function studies and are superior to expression and purification in the absence GFP fusion tagging.

Tricks of the trade used to accelerate high-resolution structure determination of membrane proteins

The rate at which X-ray structures of membrane proteins are solved is on a par with that of soluble proteins in the late 1970s. There are still many obstacles facing the membrane protein structural community. Recently, there have been several technical achievements in the field that have started to dramatically accelerate structural studies. Here, we summarize these so-called 'tricks-of-the-trade' and include case studies of several mammalian transporters.

Functional expression, purification and high sequence coverage mass spectrometric characterization of human excitatory amino acid transporter EAAT2

The glial excitatory amino acid transporter 2 (EAAT2) mediates a majority of glutamate re-uptake in human CNS and, consequently, is associated with a variety of signaling and pathological processes. While our understanding of the function, mechanism and structure of this integral membrane protein is increasing, little if any mass spectrometric (MS) data is available for any of the EAATs specifically, and for only a few mammalian plasma membrane transporters in general. A protocol to express and purify functional EAAT2 in sufficient quantities to carry out MS-based peptide mapping as needed to study ligand-transporter interactions is described. A 6xHIS epitope was incorporated into the N-terminus of human EAAT2. The recombinant protein was expressed in high levels in mammalian HEK 293T cells, where it exhibited the pharmacological properties of the native transporter. EAAT2 was purified from isolated cell membranes in a single step using nickel affinity chromatography. In-gel and in-solution trypsin digestions were conducted on the isolated protein and then analyzed by MALDI-TOF and LC-MS/MS mass spectrometry. Overall, 89% sequence coverage of the protein was achieved with these methods. In particular, an 88 amino acid tryptic peptide covering the presumed substrate binding domains HP1, TMD7, HP2, and TMD8 domains of EAAT2 was also identified after N-deglycosylation. Beyond the specific applicability to EAAT2, this study provides an efficient, simple and scalable approach to express, purify, digest and characterize integral membrane transporter proteins by mass spectrometry.

Purification and characterization of mammalian glucose transporters expressed in Pichia pastoris

The major bottleneck to the application of high-resolution techniques such as crystallographic X-ray diffraction and spectroscopic analyses to resolve the structure of mammalian membrane proteins has been the ectopic expression and purification of sufficient quantities of non-denatured proteins. This has been especially problematic for members of the major facilitator superfamily, which includes the family of mammalian glucose transporters. A simple and rapid method is described for the purification of milligram quantities of recombinant GLUT1 and GLUT4, two of the most intensively studied GLUT isoforms, after ectopic expression in Pichia pastoris. The proteins obtained were >95% pure and exhibited functional transport and ligand-binding activities.

Improved membrane protein solubilization and clean-up for optimum two-dimensional electrophoresis utilizing GLUT-1 as a classic integral membrane protein

Two-dimensional (2-D) electrophoresis remains a primary resolving tool for proteomic analyses. The final number of proteins resolved by 2-D electrophoresis depends on their respective solubility, size, charge, and isoelectric point. While water-soluble cytosolic proteins have often been well represented in 2-D maps, the same is not true with membrane proteins. Highly hydrophobic in nature, membrane proteins are poorly resolved in 2-D gels due to problems associated primarily with sample preparation. This is of especial concern in neuroscience studies where many proteins of interest are membrane bound. In the current work, we present a substantially improved sample preparation protocol for membrane proteins utilizing the GLUT-1 glucose transporter from brain microvessels as an example of a typical membrane protein. GLUT-1 (SLC2A1; solute carrier family 2 (facilitated glucose transporter), member 1) is a 55kD glycoprotein that contains 12 membrane-spanning alpha helices that impart the protein its characteristic hydrophobicity. GLUT-1 based on its amino acid sequence has a theoretical isoelectric point (pI) of 8.94. Using a combination of the non-ionic detergents, n-dodecyl-beta-maltoside (DDM) and amido sulphobetaine-14 (ASB-14) for sample solubilization, and a modification of the Bio-Rad 2-D clean-up protocol involving trichloroacetic acid (TCA)/acetone, we obtained near complete solubilization of GLUT-1 and greater than 90% recovery of this membrane protein in 1-D and 2-D Western blots. The total number of proteins resolved also increased dramatically in Deep Purple total protein stains using our improved protocol.

Expression and purification of the recombinant membrane protein YidC: a case study for increased stability and solubility

YidC is an inner membrane protein from Escherichia coli and is an essential component in insertion, translocation and assembly of membrane proteins in the membranes. Previous purification attempts resulted in heavy aggregates and precipitated protein at later stages of purification. Here we present a rapid and straightforward stability screening strategy based on gel filtration chromatography, which requires as little as 10 microg of protein and takes less than 15 min to perform. With this technique, we could rapidly screen several buffers in order to identify an optimum condition that stabilizes purified YidC. After optimization we could obtain several milligrams of purified YidC that could be easily prepared at high concentrations and that was stable for weeks at +4 degrees C. The isolated protein is thus well suited for structural studies.

Influence of calcium on direct incorporation of membrane proteins into in-plane lipid bilayer

Reconstitution of transmembrane proteins by direct incorporation into supported lipid bilayers (SLBs) is a new method to provide suitable samples for high-resolution atomic force microscopy (AFM) analysis of membrane proteins. First experiments have reported successful incorporation of proteins into detergent-destabilized SLBs. Here, we analyzed by AFM the incorporation of membrane proteins in the presence of calcium, a divalent cation functionally important for several membrane proteins. Using lipid-phase-separated membranes, we first show that calcium strongly stabilizes the SLBs decreasing the insertion of low cmc detergents, dodecyl-beta-maltoside, dodecyl-beta-thiomaltoside, and N-hexadecylphosphocholine (Fos-Choline-16) and further insertion of proteins. However, high yield of protein insertion is recovered in the presence of calcium by increasing the detergent concentration in the solution. These data revealed the importance of the calcium in the structure of SLBs and provided new insights into the mechanism of protein insertion into these model membranes.

A simple strategy towards membrane protein purification and crystallization

A simple and cost-efficient detergent screening strategy has been developed, by which a number of detergents were screened for their efficiency to extract and purify the recombinant ammonium/ammonia channel, AmtB, from Escherichia coli, hence selecting the most efficient detergents prior to large-scale protein production and crystallization. The method requires 1 ml cell culture and is a combination of immobilized metal ion affinity chromatography and filtration steps in 96-well plates. Large-scale protein purification and subsequent crystallization screening resulted in AmtB crystals diffracting to low resolution with three detergents. This strategy allows exclusion of detergents with the lowest probability in yielding protein crystals and selecting those with higher probability, hence, reducing the number of detergents to be screened prior to large-scale membrane protein purification and perhaps also crystallization.

An efficient strategy for high-throughput expression screening of recombinant integral membrane proteins

The recombinant expression of integral membrane proteins is considered a major challenge, and together with the crystallization step, the major hurdle toward routine structure determination of membrane proteins. Basic methodologies for high-throughput (HTP) expression optimization of soluble proteins have recently emerged, providing statistically significant success rates for producing such proteins. Experimental procedures for handling integral membrane proteins are generally more challenging, and there have been no previous comprehensive reports of HTP technology for membrane protein production. Here, we present a generic and integrated parallel HTP strategy for cloning and expression screening of membrane proteins in their detergent solubilized form. Based on this strategy, we provide overall success rates for membrane protein production in Escherichia coli, as well as initial benchmarking statistics of parameters such as expression vectors, strains, and solubilizing detergents. The technologies were applied to 49 E. coli integral membrane proteins with human homologs and revealed that 71% of these proteins could be produced at sufficient levels to allow milligram amounts of protein to be relatively easily purified, which is a significantly higher success rate than anticipated. We attribute the high success rate to the quality and robustness of the methodology used, and to introducing multiple parameters such as different vectors, strains, and detergents. The presented strategy demonstrates the usefulness of HTP technologies for membrane protein production, and the feasibility of large-scale programs for elucidation of structure and function of bacterial integral membrane proteins.

DnaK and DnaJ facilitated the folding process and reduced inclusion body formation of magnesium transporter CorA overexpressed in Escherichia coli

Overexpression of CorA, the major magnesium transporter from bacterial inner membrane, in Escherichia coli resulted in the synthesis of 60mg of protein per liter of culture, most of which however was in the form of inclusion bodies. The levels of inclusion body formation were reduced by lowering the cell culture temperature. To dissect CorA inclusion body formation and the folding process involved, we co-expressed the protein with various chaperones and other folding modulators. Expression of DnaK/DnaJ (Hsp70) prevented inclusion bodies from forming and resulted in the integration of more CorA into the membrane. GroEL/GroES (Hsp60/Hsp10) were less effective at reducing CorA inclusion body formation. Co-expression with either Ffh/4.5S-RNA, the signal recognition particle, or SecA, the ATPase that drives protein insertion into the membrane, had little effect on CorA folding. These results indicate: (1) that CorA inclusion bodies form immediately after synthesis at 37 degrees C, (2) that CorA solubility in the cytosol can be increased by co-expressing a chaperone system, (3) membrane targeting is probably not a rate-limiting factor, and (4) that membrane insertion becomes a limitation only when large amounts of soluble CorA are present in the cytosol. These co-expression systems can be used for producing other membrane proteins in large quantities.

TetL tetracycline efflux protein from Bacillus subtilis is a dimer in the membrane and in detergent solution

The TetL antiporter from the Bacillus subtilis inner membrane is a tetracycline-divalent cation efflux protein that is energized by the electrochemical proton gradient across the membrane. In this study, we expressed tetL in Escherichia coli and investigated the oligomeric state of TetL in the membrane and in detergent solution. Evidence for an oligomeric state of TetL emerged from SDS-PAGE and Western blot analysis of membrane samples as well as purified protein samples from cells that expressed two differently tagged TetL species. Furthermore, no formation or restoration of TetL oligomers occurred upon detergent solubilization of the membrane. Rather, oligomeric forms established in vivo persisted after solubilization. Mass spectrometry of the purified protein showed the absence of proteolysis and posttranslational modifications. Analytical size-exclusion chromatography of the purified protein revealed a dimeric TetL in dodecyl-maltoside solution. In addition, TetL dimers were found in a number of other detergents and over a wide pH range. It is therefore likely that the oligomeric form of the protein in the membrane is also a dimer.

Protein pre-fractionation in detergent–polymer aqueous two-phase systems for facilitated proteomic studies of membrane proteins

Pre-fractionation of a complex mixture of proteins increases the resolution in analytical separations of proteins from cells, tissues or organisms. Here we demonstrate a novel method for pre-fractionation of membrane proteins by a detergent-based aqueous two-phase system. Membrane proteins are strongly under-represented in proteomic studies based on two-dimensional electrophoresis (2-DE). As a model system, we have isolated mitochondria from the yeast Saccharomyces cerevisiae. Mitochondrial proteins were fractionated in an aqueous two-phase system consisting of the polymer poly(ethylene glycol) and either of two commonly used non-ionic detergents, Triton X-114 or dodecyl maltoside (DDM). Soluble proteins partitioned mainly to the polymer phase while membrane proteins were enriched in the detergent phase, as identified from one-dimensional electrophoresis (1-DE) and/or 2-DE followed by mass spectrometric analysis. Pre-fractionation was further enhanced by addition of an anionic detergent, sodium dodecyl sulfate, or a chaotropic salt, NaClO4, and by raising the pH in the system. The two-phase system pre-fractionation was furthermore combined with an alternative two-dimensional high-resolution separation method, namely ion-exchange chromatography and 1-DE. By this approach a larger number of membrane proteins could be identified compared to separation with conventional 2-DE. Thus, pre-fractionation of complex protein mixtures using the aqueous two-phase systems developed here will help to disclose larger proportions of membrane proteins in different proteomes.

On the oligomeric state of the red blood cell glucose transporter GLUT1

We stripped human red blood cell membranes of cytoskeleton proteins at pH 12 without reductant, partially solubilized the obtained vesicles by use of octaethylene glycol n-dodecyl ether and purified the glucose transporter GLUT1 by anion-exchange chromatography followed by sulfhydryl-affinity chromatography, which removed most of the nucleoside transporter (NT) and the lipids. Eighty percent of the sulfhydryl-bound GLUT1 could be eluted with sodium dodecyl sulfate (SDS) indicating that the bound protein was multimeric. Matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-ToF-MS) of the trypsinized major SDS-PAGE zone of the purified material identified GLUT1 but no other membrane protein. Transmembrane helices 1 and 8 were among the detected fragments. The reconstituted purified GLUT1 showed glucose transport activity, although only approximately 0.05 high-affinity cytochalasin B (CB) binding sites were present per GLUT1 monomer. The vesicles used as starting material for the purification showed 0.4 CB sites per GLUT1 monomer, similar to vesicles prepared in the presence of dithioerythritol. The data are consistent with the coexistence of monomeric GLUT1 with high-affinity CB-binding activity and preferentially solubilized multimeric GLUT1 with no CB-binding activity in the red blood cell membrane vesicles prepared without reductant.

Three-dimensional crystallization of the Escherichia coli glycerol-3-phosphate transporter: a member of the major facilitator superfamily

Here we report the successful three-dimensional crystallization of GlpT, the glycerol-3-phosphate transporter from Escherichia coli inner membrane. GlpT possesses 12 transmembrane alpha-helices and is a member of the major facilitator superfamily. It mediates the exchange of glycerol-3-phosphate for inorganic phosphate across the membrane. Approximately 20 phospholipid molecules per protein, identified as negatively charged phosphatidylethanolamine, phosphatidylglycerol, and cardiolipin, were required for the monodispersity of purified GlpT. Analytical size-exclusion chromatography proved to be efficient in identifying detergents for GlpT monodispersity. Nine such detergents were later used for GlpT crystallization. Screening for crystal nucleation was carried out with a variety of polyethylene glycols as the precipitant over a wide pH range. Subsequent identification of a rigid protein core by limited proteolysis and mass spectroscopy resulted in better-ordered crystals. These crystals exhibited order to 3.7 A resolution in two dimensions. However, the stacking in the third dimension was partially disordered. This stacking problem was overcome by using a detergent mixture and manipulating the ionic interactions in the crystallization solution. The resulting GlpT crystals diffracted isotropically to 3.3 A resolution and were suitable for structure determination by X-ray crystallography.

Practical aspects of overexpressing bacterial secondary membrane transporters for structural studies

Membrane transporter proteins play critical physiological roles in the cell and constitute 5-10% of prokaryotic and eukaryotic genomes. High-resolution structural information is essential for understanding the functional mechanism of these proteins. A prerequisite for structural study is to overexpress such proteins in large quantities. In the last few years, over 20 bacterial membrane transporters were overexpressed at a level of 1 mg/l of culture or higher, most often in Escherichia coli. In this review, we analyzed those factors that affect the quantity and quality of the protein produced, and summarized recent progress in overexpression of membrane transporters from bacterial inner membrane. Rapid progress in genome sequencing provides opportunities for expressing several homologues and orthologues of the target protein simultaneously, while the availability of various expression vectors allows flexible experimental design. Careful optimization of cell culture conditions can drastically improve the expression level and homogeneity of the target protein. New sample preparation techniques for mass spectrometry of membrane proteins have enabled one to identity the rigid protein core, which can be subsequently overexpressed. Size-exclusion chromatography on HPLC has proven to be an efficient method in screening detergent, pH an other conditions required for maintaining the stability and monodispersity of the protein. Such high-quality preparations of membrane transporter proteins will probably lead to successful crystallization and structure determination of these proteins in the next few years.

Lipopeptide detergents designed for the structural study of membrane proteins

The structural study of membrane proteins requires detergents that can effectively mimic lipid bilayers, and the choice of detergent is often a compromise between detergents that promote protein stability and detergents that form small micelles. We describe lipopeptide detergents (LPDs), a new class of amphiphile consisting of a peptide scaffold that supports two alkyl chains, one anchored to each end of an alpha-helix. The goal was to design a molecule that could self-assemble into a cylindrical micelle with a rigid outer hydrophilic shell surrounding an inner lipidic core. Consistent with this design, LPDs self-assemble into small micelles, can disperse phospholipid membranes, and are gentle, nondenaturing detergents that preserve the structure of the membrane proteins in solution for extended periods of time. The LPD design allows for a membrane-like packing of the alkyl chains in the core of the molecular assemblies, possibly explaining their superior properties relative to traditional detergents in stabilizing membrane protein structures.

Stability of the lactose permease in detergent solutions

Protein stability, as measured by irreversible protein aggregation, is one of the central difficulties in the handling of detergent-solubilized membrane proteins. We present a quantitative analysis of the stability of the Escherichia coli lactose (lac) permease and a series of lac permease fusion proteins containing an insertion of cytochrome(b562), T4 lysozyme or beta-lactamase in the central hydrophilic loop of the permease. The stability of the proteins was evaluated under a variety of storage conditions by both a qualitative SDS-PAGE assay and by a quantitative hplc assay. Long-chain maltoside detergents were more effective at maintaining purified protein in solution than detergents with smaller head groups and/or shorter alkyl tails. A full factorial experiment established that the proteins were insensitive to sodium chloride concentrations, but greatly stabilized by glycerol, low temperature and the combination of glycerol and low temperature. The accurate quantitation of the protein by absorbance spectroscopy required exclusion of all contact with clarified polypropylene or polyvinyl chloride (PVC) materials. Although some of the fusion proteins were more prone to aggregation than the wild-type permease, the stability of a fusion protein containing a cytochrome(b562) insertion was indistinguishable from that of native lac permease.