Polymeric Betaines: Synthesis, Characterization, and Application

Polyzwitterionic Material Structure and Dielectric Properties

There is a growing need for flexible, high-dielectric-constant materials that move beyond current polar solvent swelling and nanofiller approaches to advance energy storage and actuator applications. Here, we synthesized a series of statistical copolymers consisting of polybutyl acrylate-co-poly(2-(dimethylamino)ethyl acrylate), which were then converted into polyzwitterions to explore the impact of zwitterions on the material structure and dielectric properties. The DMAEA residues in each copolymer were quaternized using 1,4-butane sultone to yield polyzwitterions through postpolymerization modification. The functionalization of the copolymers with zwitterions increases the static dielectric constant of the materials (i.e., ∼9.3 at 80 °C) compared with the unquaternized materials. The strong dipolar interactions between zwitterions lead to aggregation, resulting in the appearance of either a second glass-transition temperature or the softening of the zwitterion aggregates. Although the zwitterions increased the dielectric constant of the materials, the zwitterion-rich aggregates are posited to restrict zwitterion mobility, precluding the maximum material dielectric constant. The reported findings position polyzwitterions as promising next-generation dielectric materials, potentially broadening applications in flexible electronics and energy-efficient devices.

Tailoring Nanofiltration Membranes by Incorporating Zwitterionic Quaternary Ammonium Terpolymer to Enhance Performance

Designing nanofiltration membranes with unique characteristics and properties is an emerging trend for water treatment research. Herein, we introduced the unique example of the aliphatic diethylenetriamine-based nanofiltration membranes and tuned its selectivity by adding the terpolymer. To enhance the permeability of the salts while maintaining the rejection of the dye Eriochrome black T (EBT), a novel cationic/zwitterionic terpolymer of Diallyldimethylammonium chloride (DADMAC), 3-(N,N-diallyl-N-methylammonio)propanesulfonate (DAMAPS), and N,N-diallyldodecane-1,12-diamine (DADA) was rationally synthesized and in situ grafted via interfacial polymerization (IP) in the polyamide active layer of the membrane. The incorporation of poly-(DADMAC-co-DAMAPS-co-DADA) polymer into the diethylenetriamine polyamide active layer results in 5.8 times increase in water flux while still retaining an outstanding rejection rate of ~99.9 % for EBT. Furthermore, it exhibited enhanced salt permeability for NaCl, MgCl2, Na2SO4, and MgSO4. The grafted polymer increased the hydrophilicity of the membrane and strengthened stability for long-term working conditions. Thus, the aliphatic diethylenetriamine membranes have great potential for desalination, and their active layer can be tuned with the zwitterionic moieties to enhance the salt permeability and keep the EBT rejection higher than 99 %, which makes these membranes valuable for environmental and textile applications.

Understanding Anti-Polyelectrolyte Effect in Polyzwitterions Using Coarse-Grained Molecular Dynamics Simulations

Polyzwitterions (PZs)─polymers bearing both positive and negative charges within each repeating unit─exhibit an unusual antipolyelectrolyte effect where their solubility and viscosity increase upon the addition of salt, contrary to typical polyelectrolytes. As model synthetic analogues of intrinsically disordered proteins, PZs in dilute aqueous solutions are expected to adopt either globular or random coil conformations, with salt addition influencing these structures. We employed coarse-grained Langevin dynamics simulations to investigate how structural parameters─specifically, the spacing between dipolar side chains (d), and the overall polymer chain length (N)─affect the conformational properties of polyzwitterions in salt solutions. Our simulations reveal that added salt leads to nonmonotonic changes in the polymer's radius of gyration, exhibiting both antipolyelectrolyte and polyelectrolyte effects depending on the salt concentration. This behavior is attributed to charge regulation and screening of dipole-dipole interactions by ions. Understanding and controlling the conformations of PZs in aqueous solutions by adjusting salt concentration is of paramount interest for applications in antimicrobial materials, antifouling coatings, drug delivery, membranes, and polymer electrolytes.

The Whole Is Greater than the Sum of Its Parts - Challenges and Perspectives in Polyelectrolytes

Polyelectrolytes offer unique properties for biological applications due to their charged nature and high water solubility. Here, the challenges in their synthesis and characterization techniques are reviewed, emphasizing that their strong interactions with the surrounding media and counterions must be considered when working with this interesting class of materials. Their potential in complexation for gene delivery, their unique stealth and anti-fouling properties, and their more specific interactions with amino acid transporters for cancer therapy are highlighted. The underlying mechanisms responsible for their biological efficacy, including the proton sponge effect for endosomal release and their interactions with cellular membranes, are addressed. For polyelectrolytes with a high level of usage, an overview is given of their historical context. This Perspective outlines the potential of polyelectrolytes for innovative applications in the field of biomedicine. Considering the physicochemical characteristics of this class of materials, this work strives to elucidate the distinctive properties and applications of polyelectrolytes.

β-Cyclodextrin-derived diallylamine salt: Synthesis and its copolymerizations

A diallyl amine salt monomer bearing a β-CD substituent was cyclopolymerized for the first time. The reaction of 6-O-toluenesulfonyl-β-cyclodextrin [(C6H10O5)6-(C5H7)]-CH2OTs with diallylamine followed by protonation afforded the diallylamine salt monomer [(C6H10O5)6-(C5H7)]-CH2NH+(CH2CH=CH2)2 Cl-] (I). The cyclopolymerization of monomer I and its copolymerization with monomer [Me2N+(CH2CH=CH2)2 Cl-] (II), [-O2CCH2NH+(CH2CH=CH2)2] (III), [H2O3PCH2NH+(CH2CH=CH2)2 Cl-] (IV) or [HO2CCH2CH(CO2H)NH+(CH2CH=CH2)2 Cl-] (V) yielded a series of copolymers having residues of β-CD and glycine or methyl phosphonate or aspartic acid. Terpolymerization in the presence of SO2 afforded polymers with alternating placements of the SO2 units. The solution properties of the pH-responsive polyzwitterions, including their viscosity, were examined. The water-insoluble terpolymer I/V/SO2 with 20 mol% β-CD residues removed the organic micropollutant 2-naphthol from an aqueous system via host/guest complexation. This work paves the way for the possible synthesis of cross-linked polymers that can simultaneously remove organic micropollutants and toxic metal ions (by complexation with the chelating glycine, aspartic acid, and aminomethyl phosphonate ligands) from contaminated aqueous systems.

Sulfobetaine Zwitterions with Embedded Fluorocarbons: Synthesis and Interfacial Properties

We describe the preparation of a new set of fluorinated sulfobetaine (FSB) zwitterionic polymers in which fluorocarbon moieties are attached directly to the zwitterionic components. An efficient two-step modification to the conventional sulfobetaine methacrylate monomer synthesis gave access to a series of polymer zwitterions containing varying extents of fluorocarbon character. FSB methacrylates proved amenable to homo- and copolymerizations using reversible addition-fragmentation chain transfer (RAFT) conditions, affording polymers with molecular weights ranging from 5 to 20 kDa and with low molecular weight distributions. Thin films of FSB homopolymers on glass proved stable to aqueous environments and exhibited increasing hydrophobicity with fluorocarbon content, as well as remarkably large water contact angle hysteresis values that enable pinning of water droplets on hydrophobic surfaces, reminiscent of the "petal effect" found in nature. FSB-containing copolymers in aqueous media demonstrated markedly reduced oil-water interfacial tension values, even with moderate (20-50 mol %) FSB incorporation.

Dipole Theory of Polyzwitterion Microgels and Gels

The behavior of polyzwitterions, constituted by dipole-like zwitterionic monomers, is significantly different from that of uniformly charged polyelectrolytes. The origin of this difference lies in the intrinsic capacity of polyzwitterions to self-associate intramolecularly and associate with interpenetrating chains driven by dominant dipolar interactions. Earlier attempts to treat polyzwitterions implicitly assume that the dipoles of zwitterion monomers are randomly oriented. At ambient temperatures, the dipolar zwitterion monomers can readily align with each other generating quadrupoles and other multipoles and thus generating heterogeneous structures even in homogeneous solutions. Towards an attempt to understand the role of such dipolar associations, we present a mean field theory of solutions of polyzwitterions. Generally, we delineate a high-temperature regime where the zwitterion dipoles are randomly oriented from a low-temperature regime where quadrupole formation is significantly prevalent. We present closed-form formulas for: (1) Coil-globule transition in the low-temperature regime, the anti-polyelectrolyte effect of chain expansion upon addition of low molar mass salt, and chain relaxation times in dilute solutions. (2) Spontaneous formation of a mesomorphic state at the borderline between the high-temperature and low-temperature regimes and its characteristics. A universal law is presented for the radius of gyration of the microgel, as a proportionality to one-sixth power of the polymer concentration. (3) Swelling equilibrium of chemically cross-linked polyzwitterion gels in both the high temperature and low-temperature regimes. Addressing the hierarchical internal dynamics of polyzwitterion gels, we present a general stretched exponential law for the time-correlation function of gel displacement vector, that can be measured in dynamic light scattering experiments. The present theory is of direct experimental relevance and additional theoretical developments to all polyzwitterion systems, and generally to biological macromolecular systems such as intrinsically disordered proteins.

Polyzwitterion fast and slow mode behavior are coupled to phase separation as observed by dynamic laser light scattering

A model zwitterionic polysulfobetaine, poly(3-(acrylamidopropyl-dimethyl-ammonium) propyl-1-sulfonate) (pAPAPS), phase separates upon cooling and exhibits an upper critical solution temperature (UCST) behavior with no added salt in deuterium oxide solutions. Dynamic light scattering measurements indicate the presence of distinct fast and slow diffusive modes, where the fast mode is interpreted as a collective diffusion coefficient and the slow mode is attributed to the diffusion of multi-chain dynamic clusters. The relative population of fast and slow modes varies systematically with temperature and concentration. A clustering temperature (T*) was assigned when the slow mode first appeared upon cooling. The slow mode then increases in relative scattering amplitude as the phase boundary is approached. The fast mode exhibits a concentration dependence above T* consistent with the virial expansion in the collective diffusion. The sign of the virial coefficient (kd) is negative, even in the good solvent region above the expected Flory temperature (Θ ≈ 39 °C), a behavior distinct from synthetic neutral polymers in organic solvents. The onset of multi-chain clustering at T < T* coincides with the poor solvent regime (T < Θ). Attractive dipolar interactions due to the zwitterionic sulfobetaine groups in pAPAPS are suggested as the origin of the multi-chain clusters with no salt. Upon the addition of 100 mM NaCl, the slow mode is suppressed, and the hydrodynamic radius is consistent with polyzwitterion chain dimensions in a dilute solution. We find that concentration dependent diffusion is highly linked to the theta temperature and the emergence of dynamic clusters as the polymer goes from good to poor solvent on approach to the UCST. The slow mode in the semidilute regime is reported along with preliminary small-angle neutron scattering data that show salt reduces clustering and leads to predominantly chain scattering.

Mechanisms of Nanoparticle Transport across Intestinal Tissue: An Oral Delivery Perspective

Oral drug administration has been a popular choice due to patient compliance and limited clinical resources. Orally delivered drugs must circumvent the harsh gastrointestinal (GI) environment to effectively enter the systemic circulation. The GI tract has a number of structural and physiological barriers that limit drug bioavailability including mucus, the tightly regulated epithelial layer, immune cells, and associated vasculature. Nanoparticles have been used to enhance oral bioavailability of drugs, as they can act as a shield to the harsh GI environment and prevent early degradation while also increasing uptake and transport of drugs across the intestinal epithelium. Evidence suggests that different nanoparticle formulations may be transported via different intracellular mechanisms to cross the intestinal epithelium. Despite the existence of a significant body of work on intestinal transport of nanoparticles, many key questions remain: What causes the poor bioavailability of the oral drugs? What factors contribute to the ability of a nanoparticle to cross different intestinal barriers? Do nanoparticle properties such as size and charge influence the type of endocytic pathways taken? In this Review, we summarize the different components of intestinal barriers and the types of nanoparticles developed for oral delivery. In particular, we focus on the various intracellular pathways used in nanoparticle internalization and nanoparticle or cargo translocation across the epithelium. Understanding the gut barrier, nanoparticle characteristics, and transport pathways may lead to the development of more therapeutically useful nanoparticles as drug carriers.

Stimuli-Responsive Macromolecular Architecture by Butler Cyclopolymerizations: Synthesis and Applications

This article reviews the synthesis of polyzwitterions (PZs) (poly-carboxybetaines, -phosphonobetaines, and -sulfobetaines) having multiple pH-responsive centers. The synthesis follows the Butler cyclopolymerization protocol involving a multitude of diallylammonium salts and their copolymerization with SO₂ and maleic acid. The PZs have been transformed into cationic-, anionic-polyelectrolytes, and polyampholytes under the influence of pH. Particular attention is given to the application of these polymers as antiscalants, mild steel corrosion inhibitors, components in constructing Aqueous Two-Phase Systems (ATPSs), and membrane modifiers. The ATPSs could be used to separate various biomolecules, including proteins. Many amphiphilic polymers incorporating a few mol % hydrophobic monomers have shown enhanced viscosities and could be suitable for applications in oil fields. The progress of applying Butler cyclopolymerization in reversible addition-fragmentation chain transfer (RAFT) chemistry has been discussed. Future works are expected to focus on RAFT cyclopolymerization to construct block copolymers.

Effect of Hydrophobicity and Salt on the Temperature Responsiveness of Polymeric Micelles Consisting of Hydrophobic and Sulfobetaine Chains

The effect of the hydrophobicity of the core part and salt on the temperature responsiveness of polymeric micelles composed of sulfobetaine and hydrophobic blocks was investigated. Poly(sulfopropyl dimethylammonium propylacrylamide) (PSPP) was used as the sulfobetaine; poly(2-ethylhexyl acrylate) (PEHA), poly(n-butyl acrylate) (PnBA), poly(ethyl acrylate) (PEA), or poly(n-hexyl acrylate) (PnHA) was used as the hydrophobic polymer. Measurement of the transmittance revealed that the transition temperature of the sulfobetaine homopolymer could be controlled by adjusting the concentration, the degree of polymerization (DP), and the concentration of the added salt. The effect of the anionic species of the added salt due to the chemical structural properties of the sulfobetaine chain was consistent with the order of ionic species with strong structural destruction in the Hofmeister series. The temperature response and micelle formation behavior of the polymeric micelles according to the hydrophobicity of the core part and the preparation method were examined by static light scattering (SLS), fluorescence measurement with pyrene, dynamic light scattering (DLS), transmittance, and atomic force microscopy (AFM). Micelles that had EHA (solubility in water was 0.01 g/100 mL) as the core and did not show temperature responsiveness expressed temperature responsiveness at a lower hydrophobicity (solubility of nBA in water was 0.14 g/100 mL). nBA-b-SPP did not show temperature responsiveness due to the block ratio. However, when micelles were prepared by dialysis, smaller and more stable micelles could be formed in an equilibrium state, and temperature responsiveness was observed. Their transition temperature can be controlled by adjusting the ratio of the sulfobetaine blocks, the hydrophobicity of the core part, the concentration of the polymer aqueous solution, and the concentration of the added salt. Furthermore, like the sulfobetaine homopolymer, the effect depended on the anionic species of the added salt.

Chemical Approaches to Synthetic Drug Delivery Systems for Systemic Applications

Poor water solubility and low bioavailability of active pharmaceutical ingredients (APIs) are major causes of friction in the pharmaceutical industry and represent a formidable hurdle for pharmaceutical drug development. Drug delivery remains the major challenge for the application of new small-molecule drugs as well as biopharmaceuticals. The three challenges for synthetic delivery systems are: (i) controlling drug distribution and clearance in the blood; (ii) solubilizing poorly water-soluble agents, and (iii) selectively targeting specific tissues. Although several polymer-based systems have addressed the first two demands and have been translated into clinical practice, no targeted synthetic drug delivery system has reached the market. This Review is designed to provide a background on the challenges and requirements for the design and translation of new polymer-based delivery systems. This report will focus on chemical approaches to drug delivery for systemic applications.

Modeling Polyzwitterion-Based Drug Delivery Platforms: A Perspective of the Current State-of-the-Art and Beyond

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles' interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer. Recent studies have shown (poly)zwitterions to be alternatives for PEG with superior biocompatibility. (Poly)zwitterions are super hydrophilic, mainly stimuli-responsive, easy to functionalize and they display an extremely low protein adsorption and long biodistribution time. These unique characteristics make them already promising candidates as drug delivery carriers. Furthermore, since they have highly dense charged groups with opposite signs, (poly)zwitterions are intensely hydrated under physiological conditions. This exceptional hydration potential makes them ideal for the design of therapeutic vehicles with antifouling capability, i.e., preventing undesired sorption of biologics from the human body in the drug delivery vehicle. Therefore, (poly)zwitterionic materials have been broadly applied in stimuli-responsive "intelligent" drug delivery systems as well as tumor-targeting carriers because of their excellent biocompatibility, low cytotoxicity, insignificant immunogenicity, high stability, and long circulation time. To tailor (poly)zwitterionic drug vehicles, an interpretation of the structural and stimuli-responsive behavior of this type of polymer is essential. To this end, a direct study of molecular-level interactions, orientations, configurations, and physicochemical properties of (poly)zwitterions is required, which can be achieved via molecular modeling, which has become an influential tool for discovering new materials and understanding diverse material phenomena. As the essential bridge between science and engineering, molecular simulations enable the fundamental understanding of the encapsulation and release behavior of intelligent drug-loaded (poly)zwitterion nanoparticles and can help us to systematically design their next generations. When combined with experiments, modeling can make quantitative predictions. This perspective article aims to illustrate key recent developments in (poly)zwitterion-based drug delivery systems. We summarize how to use predictive multiscale molecular modeling techniques to successfully boost the development of intelligent multifunctional (poly)zwitterions-based systems.

Thermo-Responsive Polyion Complex of Polysulfobetaine and a Cationic Surfactant in Water

Poly(4-((3-methacrylamidopropyl)dimethylammonium)butane-1-sulfonate) (PSBP) was prepared via controlled radical polymerization. PSBP showed upper critical solution temperature (UCST) behavior in aqueous solutions, which could be controlled by adjusting the polymer and NaCl concentrations. Owing to its pendant sulfonate anions, PSBP exhibited a negative zeta potential of −7.99 mV and formed a water-soluble ion complex with the cationic surfactant cetyltrimethylammonium bromide (CTAB) via attractive electrostatic interaction. A neutral PSBP/CTAB complex was formed under equimolar concentrations of the pendant sulfonate group in PSBP and the quaternary ammonium group in CTAB. Transmittance electron microscopic images revealed the spherical shape of the complex. The stoichiometrically neutral-charge PSBP/CTAB complex exhibited UCST behavior in aqueous solutions. Similar to PSBP, the phase transition temperature of the PSBP/CTAB complex could be tuned by modifying the polymer and NaCl concentrations. In 0.1 M aqueous solution, the PSBP/CTAB complex showed UCST behavior at a low complex concentration of 0.084 g/L, whereas PSBP did not exhibit UCST behavior at concentrations below 1.0 g/L. This observation suggests that the interaction between PSBP and CTAB in the complex was stronger than the interpolymer interaction of PSBP.

Temperature dependent single-chain structure of poly[3-(acrylamidopropyl-dimethyl-ammonium) propyl-1-sulfonate] via small-angle neutron scattering

Responsive polyzwitterionic materials have become important for a range of applications such as environmental remediation and targeted drug delivery. Much is known about the macroscopic phase-behaviors of such materials, but how the smaller scale single-chain structures of polyzwitterions respond to external stimuli is not well understood, especially at temperatures close to their phase boundaries. Such chain conformation responses are important in directing larger-scale associative properties. Here, we study the temperature dependent single-chain structure of a model polysulfobetaine, poly[3-(acrylamidopropyl-dimethyl-ammonium) propyl-1-sulfonate], using small angle neutron scattering. In the absence of salt, we find that temperature has a large effect on solvent quality with a decreasing trend from good solvent conditions at 50 °C to poor solvent at 10 °C (a temperature just above the cloud point of 7.6 °C) and an estimated theta temperature of 39 °C. When 100 mM NaCl is present, the solvent quality is good with weak temperature dependence. Without salt present, the polymer chain appears to have a nearly Gaussian coil conformation and the backbone becomes slightly more rigid as the temperature is lowered to the cloud point as determined by the Debye-local rod model on a Kratky plot. The addition of salt has a notable effect on the intra-chain correlations where an increase in chain dimensions to a swollen coil conformation and an increase in chain rigidity is observed at 100 mM NaCl in D2O, however, with a negligible temperature dependence.

Determination of non-freezing water in different nonfouling materials by differential scanning calorimetry

Nonfouling materials have attracted increasing interest for their excellent biocompatibility and low immunogenicity. Strong hydration is believed to be the key reason for their resisting capability to nonspecific protein adsorption. However, little attention has been paid to quantifying their strong water binding capacity. In this study, we synthesized four zwitterionic polymers, including poly(sulfobetaine methacrylate) (pSBMA), poly(carboxybetaine methacrylate) (pCBMA), poly(carboxybetaine acrylamide) (pCBAA) and poly(2-methacryloyloxyethyl phosphorylcholine) (pMPC), and compared non-freezing water of these zwitterionic polymers with typical antifouling polymer poly(ethylene glycol) (PEG) using differential scanning calorimetry (DSC). Non-freezing water of their monomers was also investigated. The non-freezing water of the polymers (per unit) is pMPC (10.7 ± 1.4) ≈ pCBAA (10.8 ± 1.5) > pCBMA (9.0 ± 0.6) > pSBMA (6.6 ± 0.4) > PEG20000 (0.60 ± 0.04). Similar trend is observed for their monomers. For all studied zwitterionic materials, they showed higher binding capacity than PEG. We attribute the stronger hydration of zwitterionic polymers to their strong electrostatic interactions.

Synthesis of a biomimetic zwitterionic pentapolymer to fabricate high-performance PVDF membranes for efficient separation of oil-in-water nano-emulsions

Oily wastewater from industries has an adverse impact on the environment, human and aquatic life. Poly(vinylidene fluoride) (PVDF) membrane modified with a zwitterionic/hydrophobic pentapolymer (PP) with controlled pore size has been utilized to separate oil from water from their nano-emulsions. The PP has been synthesized in 91% yield via pentapolymerization of four different diallylamine salts [(CH2=CHCH2)2NH+(CH2)x A-], bearing CO2-, PO3H-, SO3-, (CH2)12NH2 pendants, and SO2 in a respective mol ratio of 25:36:25:14:100. Incorporating PP into PVDF has shown a substantially reduced membrane hydrophobicity; the contact angle decreased from 92.5° to 47.4°. The PP-PVDF membranes have demonstrated an excellent capability to deal with the high concentrations of nano-emulsions with a separation efficiency of greater than 97.5%. The flux recovery ratio (FRR) of PP-5 incorporated PVDF membrane was about 82%, which was substantially higher than the pristine PVDF.

Complex Formation in the Sulfobetaine-Containing Entirely Ionic Block Copolymer/Ionic Homopolymer System and Their Temperature Responsivity

The behavior of micelle formation in the sulfobetaine-containing entirely ionic block copolymer/ionic homopolymer system and its functional expression (temperature responsivity) were investigated. Poly(sulfopropyl dimethylammonium propylacrylamide) was used as the sulfobetaine, poly[3-(methacrylamido)propyl trimethylammonium chloride] was used as the cationic polymer, and poly(p-styrenesulfonic acid sodium salt) was used as the anionic polymer. The changes in transition temperature with the concentration and the behavior of micelle formation in the block-/cationic homopolymer and block-/anionic homopolymer system were compared and examined by transmittance, dynamic light scattering, atomic force microscopy, and ¹H nuclear magnetic resonance. Only block-/cationic homopolymer systems with a core-shell (polyion complex-sulfobetaine) structure showed temperature responsivity of upper critical solution temperature type, and the responsiveness was dependent on the concentration. On the other hand, the block-/anionic homopolymer system had a core-shell structure at a concentration of 0.05 wt %, but temperature responsiveness was not observed at this concentration. At higher concentrations, electrostatic attraction caused the anionic homopolymer and block copolymer to interact as a whole, resulting in a loss of responsiveness. When the ionic homopolymer had a higher degree of polymerization than the sulfobetaine, it could not form a core-shell structure by interacting with the sulfobetaine and ionic polymer moieties of the block copolymer, thus resulting in the loss of responsiveness. The block-/ionic homopolymer system prepared by the reforming method through dialysis formed uniform and small micelles but lost responsiveness due to morphological stability and electrostatic interaction between the block copolymer and ionic homopolymer.

Nonionic Polymer with Flat Upper Critical Solution Temperature Behavior in Water

We rationally designed a monomer that when polymerized formed a well-defined nonionic polymer [poly(2-(methacryloyloxy) ethylureido glycinamide), PMEGA] by reversible addition fragmentation chain transfer with a flat and tunable upper critical solution temperature (UCST) in water. The monomer was made in one pot from commercially available compounds and with ease of purification. Strong hydrogen-bonding side groups on the polymer produced sharp coil-to-globule transitions upon cooling below its UCST. Ideal random copolymers produced with butyl methacrylate also showed flat UCST profiles, in which the UCST increased with a greater butyl methacrylate copolymer composition from 7 to 65 °C. In the presence of NaCl, the UCST decreased linearly with NaCl concentration due to the "salting-in" effect, and it was found that the slopes from the linear decrease of UCST were nearly identical for all copolymer compositions. This new polymer and its copolymers support the hypothesis that strong hydrogen bonding between the side groups allowed the flat UCST to be readily tuned with a high level of predictability. We postulate that this polymer system may provide wide biological applicability similar to that found for the well-used flat lower critical solution temperature (LCST) of poly(N-isopropylacrylamide).

Polybetaines in Biomedical Applications

Polybetaines, that have moieties bearing both cationic (quaternary ammonium group) and anionic groups (carboxylate, sulfonate, phosphate/phosphinate/phosphonate groups) situated in the same structural unit represent an important class of smart polymers with unique and specific properties, belonging to the family of zwitterionic materials. According to the anionic groups, polybetaines can be divided into three major classes: poly(carboxybetaines), poly(sulfobetaines) and poly(phosphobetaines). The structural diversity of polybetaines and their special properties such as, antifouling, antimicrobial, strong hydration properties and good biocompatibility lead to their use in nanotechnology, biological and medical fields, water remediation, hydrometallurgy and the oil industry. In this review we aimed to highlight the recent developments achieved in the field of biomedical applications of polybetaines such as: antifouling, antimicrobial and implant coatings, wound healing and drug delivery systems.

Glycine betaine grafted nanocellulose as an effective and bio-based cationic nanocellulose flocculant for wastewater treatment and microalgal harvesting

Flocculation is a widely used technology in industry including for wastewater treatment and microalgae harvesting. To increase the sustainability of wastewater treatment, and to avoid contamination of the harvested microalgal biomass, there is a need for bio-based flocculants to replace synthetic polymer flocculants or metal salt coagulants. We developed the first cellulose nanocrystalline flocculant with a grafted cationic point charge, i.e. glycine betaine (i.e. N,N,N-trimethylglycine) grafted cellulose nanocrystals (CNCs) effective for the flocculation of kaolin (a model system for wastewater treatment), the freshwater microalgae Chlorella vulgaris, and the marine microalgae Nannochloropsis oculata. We successfully grafted glycine betaine onto CNCs using a one-pot reaction using a tosyl chloride activated esterification reaction with a degree of substitution ranging from 0.078 ± 0.003 to 0.152 ± 0.002. The degree of substitution is controlled by the reaction conditions. Flocculation of kaolin (0.5 g L^-1) required a dose of 2 mg L^-1, a comparable dose to commercial polyacrylamide-based flocculants. Flocculation was also successful for freshwater as well as marine microalgae (biomass concentration about 300 mg L^-1 dry matter), although the flocculation efficiency of the latter remained below 80%. The dose to induce flocculation (DS = 0.152 ± 0.002) was 20 mg L^-1 for the freshwater Chlorella vulgaris and 46 mg L^-1 for the marine Nannochloropsis oculata, comparable to other bio-based flocculants such as chitosan or TanFloc.

Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications

Zwitterionic polymers by virtue of their unique chemical and physical attributes have attracted researchers in recent years. The simultaneous presence of positive and negative charges in the same repeat unit renders them of various interesting properties such as superhydrophilicity, which has significantly broadened their scope for being used in different applications. Among polyzwitterions of different architectures, micro- and/or nano-gels have started receiving attention only until recently. These 3D cross-linked colloidal structures show peculiar characteristics in context to their solution properties, which are attributable either to the comonomers present or the presence of different electrolytes and biological specimens. In this review, a concise yet detailed account is provided of the different synthetic techniques and application domains of zwitterion-based micro- and/or nanogels that have been explored in recent years. Here, the focus is kept solely on the "polybetaines," which have garnered maximum research interest and remain the extensively studied polyzwitterions in literature. While their vast application potential in the biomedical sector is being detailed here, some other areas of scope such as using them as microreactors for the synthesis of metal nanoparticles or making smart membranes for water-treatment are discussed in this minireview as well.

Sulfobetaine-based polydisulfides with tunable upper critical solution temperature (UCST) in water alcohols mixture, depolymerization kinetics and surface wettability

HYPOTHESIS

Synthesis of a new family of polymers having a polydisulfide structure can be conducted from sulfobetaine-based derivative of natural (R)-lipoic acid. A polydisulfide backbone of polymer can be depolymerized by response to external stimuli and sulfobetaine pendant groups ensure the upper critical solution temperature (UCST) behaviour temperatures that can be modulated according to the nature of the solvent and concentration.

EXPERIMENTS

Sulfobetaine-bearing polydisulfides were synthesized from dithiolane derivatives and then characterized. UCST behavior of the polymers in water and in mixtures containing different alcohols (methanol, ethanol, isopropanol) was investigated. The regeneration of monomers from the polymers in response to external stimuli was examined using UV-vis and circular dichroism (CD) spectroscopy. Tunable surface wettability were shown on the grafted polymers.

FINDINGS

Decreasing polarity and/or increasing alcohol percentage in the water mixtures induced an increase in the cloud points of the polymers in the solutions. Thermoresponsive behaviour were repeatable and fully reversible with negligible hysteresis from aggregate to unimer state. The regeneration of monomers by depolymerization was tunable by temperature and sunlight. A thickness dependence on surface wettability was observed on wafers covalently modified with polydisulfides. This is the first report of sulfobetaine-based polydisulfides showing tunable UCST behavior and surface wettability.

Advanced materials for drug delivery across mucosal barriers

Mucus is a viscoelastic gel that traps pathogens and other foreign particles to limit their penetration into the underlying epithelium. Dosage forms containing particle-based drug delivery systems are trapped in mucosal layers and will be removed by mucus turnover. Mucoadhesion avoids premature wash-off and prolongs the residence time of drugs on mucus. Moreover, mucus penetration is essential for molecules to access the underlying epithelial tissues. Various strategies have been investigated to achieve mucoadhesion and mucus penetration of drug carriers. Innovations in materials used for the construction of drug-carrier systems allowed the development of different mucoadhesion and mucus penetration delivery systems. Over the last decade, advances in the field of materials chemistry, with a focus on biocompatibility, have led to the expansion of the pool of materials available for drug delivery applications. The choice of materials in mucosal delivery is generally dependent on the intended therapeutic target and nature of the mucosa at the site of absorption. This review presents an up-to-date account of materials including synthesis, physical and chemical modifications of mucoadhesive materials, nanocarriers, viral mimics used for the construction of mucosal drug delivery systems.

Stimuli-Responsive Zwitterionic Core-Shell Microgels for Antifouling Surface Coatings

Fouling on filtration membranes is induced by the nonspecific interactions between the membrane surface and the foulants, and effectively hinders their efficient use in various applications. Here, we established a facile method for the coating of membrane surface with a dual stimuli-responsive antifouling microgel system enriched with a high polyzwitterion content. Different poly(sulfobetaine) (PSB) zwitterionic polymers with defined molecular weights and narrow dispersities were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and integrated onto poly(N-vinylcaprolactam) (PVCL) microgels via a controlled dosage of a cross-linker, adapting a precipitation polymerization technique to obtain a core-shell microstructure. Increasing the PSB macro-RAFT concentration resulted in a shift of both upper critical solution temperature and lower critical solution temperature toward higher temperatures. Cryogenic transmission electron microscopy at different temperatures suggested the formation of a core-shell morphology with a PVCL-rich core and a PSB-rich shell. On the other hand, the significant variations of different characteristic proton signals and reversible phase transitions of the microgel constituents were confirmed by temperature-dependent ¹H NMR studies. Utilizing a quartz crystal microbalance with dissipation monitoring, we have been able to observe and quantitatively describe the antipolyelectrolyte behavior of the zwitterionic microgels. The oscillation frequency of the sensor proved to change reversibly according to the variations of the NaCl concentration, showing, in fact, the effect of the interaction between the salt and the opposite charges present in the microgel deposited on the sensor. Poly(ethersulfone) membranes, chosen as the model surface, when functionalized with zwitterionic microgel coatings, displayed protein-repelling property, stimulated by different transition temperatures, and showed even better performances at increasing NaCl concentration. These kinds of stimuli-responsive zwitterionic microgel can act as temperature-triggered drug delivery systems and as potential coating materials to prevent bioadhesion and biofouling as well.

Salt-Enhanced CO2-Responsiveness of Microgels

Here, we report a distinct mechanism for harnessing CO₂-responsiveness through enhancing CO₂ capture ability. The finding is demonstrated on the microgels that are composed of oligo(ethylene glycol) and sulfonate moieties. Laser light scattering studies on dilute aqueous dispersion of these microgels indicated a low CO₂-responsivity, which can be significantly enhanced by adding NaCl and other salts. This salt-enhanced CO₂-responsiveness of microgels can be elucidated by the antipolyelectrolyte behavior and its superposition of forming cross-links physically with CO₂ as an intermediate. Further results of the filtration experiments on microgel translocation through pores suggest the feasibility of the explanation. The finding is also supported by the CO₂ capture-release experiments on the dispersion, which can reversibly absorb and desorb CO₂.

Design and Synthesis of a Dual-Purpose Superadsorbent Containing a High Density of Chelating Motifs for the Fast Mitigation of Methylene Blue and Pb(II)

Maleic acid underwent alternate copolymerization with diallylaminomethylphosphonic acid·HCl [(CH2=CHCH2)2NH+CH2PO3H2 Cl-] and a cross-linker to give a new pH-responsive resin. Methylene blue (MB) removal from its 3000 ppm solution by the resin at pH 7 followed second-order kinetics with an E a of 34.8 kJ mol-1. MB removal was achieved very fast (10 min), attaining over 98.5% at 328 K. The q e obtained using MB concentrations in the range 100-8000 ppm fitted the Langmuir nonlinear isotherm model to give ΔG o, ΔH o, and ΔS o values of ≈ -21 kJ, 36.5 kJ mol-1, and 185 J mol-1 K-1, respectively. The resin is a superadsorbent with a q max value of 2445 mg g-1. The adsorbent also removed 97% Pb(II) within 5 min from its 10 000 ppb solution. The resin reduced the Pb(II) concentration from 200 to 3.8 ppb. The resin also demonstrated its ability to remove contaminants from industrial wastewater, reducing priority metal contaminants to ppb and sub-ppb levels. The resin can be recycled with stable efficiency. The outstanding performance places the resin in a top position in a list of recently reported sorbents.

Comparative Studies of the Corrosion Inhibition Efficacy of a Dicationic Monomer and Its Polymer against API X60 Steel Corrosion in Simulated Acidizing Fluid under Static and Hydrodynamic Conditions

N ¹,N ¹-diallyl-N ⁶,N ⁶,N ⁶-tripropylhexane-1,6-diaminium chloride (NDTHDC) and its polymer poly(N ¹,N ¹-diallyl-N ⁶,N ⁶,N ⁶-tripropylhexane-1,6-diaminium chloride) (poly-NDTHDC) were synthesized and tested against API X60 carbon steel corrosion in 15 wt % HCl solution. Weight loss, electrochemical, and surface analysis techniques were used. Results show that poly-NDTHDC is better than NDTHDC. Moreover, 1000 mg/L NDTHDC protected the studied surface by 79.1% at 25 °C, while 100 mg/L poly-NDTHDC afforded 86.1% protection. Inhibition efficiency increases with temperature (up to 60 °C) but depreciates thereafter. NDTHDC and poly-NDTHDC perform better under the hydrodynamic condition than the static condition. TGA and FTIR results reveal that poly-NDTHDC is chemically and thermally stable.

Development of aqueous size exclusion chromatography conditions to characterize polyzwitterion-block-N-isopropyl acrylamide copolymers

Block copolymers that exhibit both an upper critical solution temperature and a lower critical solution temperature are difficult to characterize due to inherent solubility difference between the two blocks. For example, accurate determination of both the molar mass and molar mass distribution is challenging for polyzwitterion-block-N-isopropyl acrylamide (NIPAM) copolymers in aqueous solutions due to self-assembly. However, there are a few examples of using size exclusion chromatography (SEC) for characterization, in which hexafluoro isopropanol (HFIP) is used in all cases. Yet, researchers are hesitant to use this solvent due to how expensive and hazardous HFIP is. Therefore, alternatives to HFIP for SEC analysis would be desirable. Here, a systematic methodology featuring aqueous SEC is demonstrated using several solvent conditions to enable the elution of polyzwitterion-block-NIPAM copolymers on Agilent PolarGel^† and Tosoh TSKgel^† column sets. These SEC conditions include 0.2 M KI in water on the PolarGel columns and 0.2 M KI/ 30% DMF in water on the PolarGel and TSKgel columns. These aqueous systems can be utilized for the characterization of similar water-soluble block copolymers that are relevant for drug delivery and other biomedical applications.

Rigid Arrangements of Ionic Charge in Zeolite Frameworks Conferred by Specific Aluminum Distributions Preferentially Stabilize Alkanol Dehydration Transition States

Zeolite reactivity depends on the solvating environments of their micropores and the proximity of their Brønsted acid sites. Turnover rates (per H⁺ ) for methanol and ethanol dehydration increase with the fraction of H⁺ sites sharing six-membered rings of chabazite (CHA) zeolites. Density functional theory (DFT) shows that activation barriers vary widely with the number and arrangement of Al (1-5 per 36 T-site unit cell), but cannot be described solely by Al-Al distance or density. Certain Al distributions yield rigid arrangements of anionic charge that stabilize cationic intermediates and transition states via H-bonding to decrease barriers. This is a key feature of acid catalysis in zeolite solvents, which lack the isotropy of liquid solvents. The sensitivity of polar transition states to specific arrangements of charge in their solvating environments and the ability to position such charges in zeolite lattices with increasing precision herald rich catalytic diversity among zeolites of varying Al arrangement.

Amphiphilic Dicyclopentenyl/Carboxybetaine-Containing Copolymers for Marine Fouling-Release Applications

Zwitterionic materials received great attention in recent studies due to their high antifouling potential, though their application in practical coatings is still challenging. Amphiphilic polymers have been proven to be an effective method to combat fouling in the marine environment. This study reports the incorporation of small amounts of zwitterionic carboxybetaine methacrylate (CBMA) into hydrophobic ethylene glycol dicyclopentenyl ether acrylate (DCPEA). A new set of copolymers with varying amphiphilicities was synthesized and coated on chemically modified glass substrates. The antifouling capabilities were assessed against the diatom Navicula perminuta and multiple species in the field. Unsurprisingly, high diatom densities were observed on the hydrophobic control coatings. The integration of small zwitterionic contents of only ∼5 wt % was already sufficient to rapidly form a hydrophilic interface that led to a strong reduction of fouling. Ultralow fouling was also observed for the pure zwitterionic coatings in laboratory experiments, but it failed when tested in the real ocean environment. We noticed that the ability to absorb large amounts of water and the diffuse nature of the interphase correlate with the adsorption of silt, which can mask the hydrophilic chemistries and facilitate the settlement of organisms. The amphiphilic coatings showed low fouling in dynamic short-term field exposures, which could be explained by the reduced tendency of the coatings for sediment adsorption.

Dual-Temperature-Responsive Microgels from a Zwitterionic Functional Graft Copolymer with Superior Protein Repelling Property

In this work, we developed a synthetic strategy to synthesize dual-temperature-responsive low surface fouling zwitterionic microgels. Statistical poly(N-vinylcaprolactam-co-glycidyl methacrylate) copolymers were synthesized by RAFT polymerization and post-modified by thiol-epoxy click reaction with thiol end-group-modified poly(sulfobetaine) macro-RAFT (PSB-SH) to obtain poly(N-vinylcaprolactam-co-glycidyl methacrylate)-graft-poly(sulfobetaine) (PVCL-co-PGMA-g-PSB) graft copolymers. Synthesized graft copolymers were cross-linked by diamine cross-linker in water-in-oil (w/o) inverse mini-emulsion to obtain zwitterionic microgels. Using this approach, we synthesized microgels with unique microstructure, high loading and uniform distribution of poly(sulfobetaine) chains, which exhibits tunable dual-volume phase transition temperatures. The microgels also showed excellent antifouling property reflected in strongly reduced protein absorption on a microgel-coated surface observed in real time by a Quartz Crystal Microbalance with Dissipation (QCM-D) monitoring experiment with continuous flow of protein solution. Therefore, this kind of zwitterionic microgel can be potentially used for temperature-triggered drug delivery and anti-bioadhesion coating material as well.

Weak Polyampholytes at the Interface of Magnetic Nanocarriers: A Facile Catch-and-Release Platform for Dyes

We present a platform of charge-invertible core-shell hybrid particles for the selective and reversible adsorption of small charged molecules as model systems. The herein employed carrier systems consist of an iron oxide core coated with different pH-responsive polyampholytes which exhibit varying surface charge depending on the surrounding pH value. The resulting materials were used for electrostatically mediated catch-and-release experiments of either cationic or anionic dyes with the perspective to allow the pH-dependent magnetically guided transport of suitable cargo. The use of three different polyampholyte coatings (poly(2-(imidazol-1-yl)acrylic acid) (PImAA), poly(dehydroalanine) (PDha), and poly(N,N-diallylglutamate) (PDAGA)) enables a deeper understanding about how the surface net charge in combination with the charge and charge density of any cargo influences such processes. The size, surface charge, and aggregation behavior of the herein described particles were investigated via dynamic light scattering (DLS), transmission electron microscopy (TEM), and pH-dependent ζ-potential measurements, whereas adsorption and release studies were investigated via UV-vis.

Unique Oil-in-Brine Pickering Emulsion Using Responsive Antipolyelectrolyte Functionalized Latex: A Versatile Emulsion Stabilizer

A simple and straightforward approach to synthesize oil-in-water (O/W) emulsions under high salinity and temperature using zwitterion-functionalized latexes are presented in this work. First, well-defined functionalized latexes were synthesized by emulsifier-free emulsion copolymerization in the presence of precursor sulfobetaine comonomer using brine as a continuous phase. The surface-functionalized latex particles were then characterized by DLS, SEM, TEM, XPS, and TGA. The functionalized latex exhibited antipolyelectrolyte behavior in high salinity brine and at high temperatures. The effects of salinity, temperature, and pH on the long-term stability of the particles were investigated. Further, to evaluate the potential in high salinity brine and high temperature, the saltphilic functionalized latexes were utilized to stabilize the oil/brine (O/W) interface without any other additives. The latex enabled the formation of a stable Pickering emulsion system with low solid content (<0.02% w/w) in the presence of 50% v/v n-decane. The functionalized latexes were self-assembled at the O/W interface as a spherical colloidosome in high salinity brine through hydrophobic interactions and irreversible adsorption. The supraparticles were imaged with SEM, providing an insight that the exterior of the emulsion droplets is stabilized by the saltphilic latex particles, forming a protective layer at the oil-water interface through electrostatic repulsion. The antipolyelectrolyte latex can be utilized as a novel emulsion stabilizer, which can provide a versatile alternative for applications in a complex environment such as high salinity, temperature, and low or high pH.