RFLP mapping of Brassica napus using doubled haploid lines

Fungal effectors versus defense-related genes of B. juncea and the status of resistant transgenics against fungal pathogens

Oilseed brassica has become instrumental in securing global food and nutritional security. B. juncea, colloquially known as Indian mustard, is cultivated across tropics and subtropics including Indian subcontinent. The production of Indian mustard is severely hampered by fungal pathogens which necessitates human interventions. Chemicals are often resorted to as they are quick and effective, but due to their economic and ecological unsustainability, there is a need to explore their alternatives. The B. juncea-fungal pathosystem is quite diverse as it covers broad-host range necrotrophs (Sclerotinia sclerotiorum), narrow-host range necrotrophs (Alternaria brassicae and A. brassicicola) and biotrophic oomycetes (Albugo candida and Hyaloperonospora brassica). Plants ward off fungal pathogens through two-step resistance mechanism; PTI which involves recognition of elicitors and ETI where the resistance gene (R gene) interacts with the fungal effectors. The hormonal signalling is also found to play a vital role in defense as the JA/ET pathway is initiated at the time of necrotroph infection and SA pathway is induced when the biotrophs attack plants. The review discuss the prevalence of fungal pathogens of Indian mustard and the studies conducted on effectoromics. It covers both pathogenicity conferring genes and host-specific toxins (HSTs) that can be used for a variety of purposes such as identifying cognate R genes, understanding pathogenicity and virulence mechanisms, and establishing the phylogeny of fungal pathogens. It further encompasses the studies on identifying resistant sources and characterisation of R genes/quantitative trait loci and defense-related genes identified in Brassicaceae and unrelated species which, upon introgression or overexpression, confer resistance. Finally, the studies conducted on developing resistant transgenics in Brassicaceae have been covered in which chitinase and glucanase genes are mostly used. The knowledge gained from this review can further be used for imparting resistance against major fungal pathogens.

Discovery of common loci and candidate genes for controlling salt-alkali tolerance and yield-related traits in Brassica napus L

KEY MESSAGE

Common loci and candidate genes for controlling salt-alkali tolerance and yield-related traits were identified in Brassica napus combining QTL mapping with transcriptome under salt and alkaline stresses. The yield of rapeseed (Brassica napus L.) is determined by multiple yield-related traits, which are susceptible to environmental factors. Many yield-related quantitative trait loci (QTLs) have been reported in Brassica napus; however, no studies have been conducted to investigate both salt-alkali tolerance and yield-related traits simultaneously. Here, specific-locus amplified fragment sequencing (SLAF-seq) technologies were utilized to map the QTLs for salt-alkali tolerance and yield-related traits. A total of 65 QTLs were identified, including 30 QTLs for salt-alkali tolerance traits and 35 QTLs for yield-related traits, accounting for 7.61-27.84% of the total phenotypic variations. Among these QTLs, 18 unique QTLs controlling two to four traits were identified by meta-analysis. Six novel and unique QTLs were detected for salt-alkali tolerance traits. By comparing these unique QTLs for salt-alkali tolerance traits with those previously reported QTLs for yield-related traits, seven co-localized chromosomal regions were identified on A09 and A10. Combining QTL mapping with transcriptome of two parents under salt and alkaline stresses, thirteen genes were identified as the candidates controlling both salt-alkali tolerance and yield. These findings provide useful information for future breeding of high-yield cultivars resistant to alkaline and salt stresses.

Current Status of the Disease-Resistant Gene(s)/QTLs, and Strategies for Improvement in Brassica juncea

Brassica juncea is a major oilseed crop in tropical and subtropical countries, especially in south-east Asia like India, China, Bangladesh, and Pakistan. The widespread cultivation of genetically similar varieties tends to attract fungal pathogens which cause heavy yield losses in the absence of resistant sources. The conventional disease management techniques are often expensive, have limited efficacy, and cause additional harm to the environment. A substantial approach is to identify and use of resistance sources within the Brassica hosts and other non-hosts to ensure sustainable oilseed crop production. In the present review, we discuss six major fungal pathogens of B. juncea: Sclerotinia stem rot (Sclerotinia sclerotiorum), Alternaria blight (Alternaria brassicae), White rust (Albugo candida), Downy mildew (Hyaloperonospora parasitica), Powdery mildew (Erysiphe cruciferarum), and Blackleg (Leptoshaeria maculans). From discussing studies on pathogen prevalence in B. juncea, the review then focuses on highlighting the resistance sources and quantitative trait loci/gene identified so far from Brassicaceae and non-filial sources against these fungal pathogens. The problems in the identification of resistance sources for B. juncea concerning genome complexity in host subpopulation and pathotypes were addressed. Emphasis has been laid on more elaborate and coordinated research to identify and deploy R genes, robust techniques, and research materials. Examples of fully characterized genes conferring resistance have been discussed that can be transformed into B. juncea using advanced genomics tools. Lastly, effective strategies for B. juncea improvement through introgression of novel R genes, development of pre-breeding resistant lines, characterization of pathotypes, and defense-related secondary metabolites have been provided suggesting the plan for the development of resistant B. juncea.

Fine mapping of Brassica napus blackleg resistance gene Rlm1 through bulked segregant RNA sequencing

The fungal pathogen Leptosphaeria maculans causes blackleg disease on canola and rapeseed (Brassica napus) in many parts of the world. A B. napus cultivar, ‘Quinta’, has been widely used for the classification of L. maculans into pathogenicity groups. In this study, we confirmed the presence of Rlm1 in a DH line (DH24288) derived from B. napus cultivar ‘Quinta’. Rlm1 was located on chromosome A07, between 13.07 to 22.11 Mb, using a BC₁ population made from crosses of F₁ plants of DH16516 (a susceptible line) x DH24288 with bulked segregant RNA Sequencing (BSR-Seq). Rlm1 was further fine mapped in a 100 kb region from 19.92 to 20.03 Mb in the BC₁ population consisting of 1247 plants and a F₂ population consisting of 3000 plants using SNP markers identified from BSR-Seq through Kompetitive Allele-Specific PCR (KASP). A potential resistance gene, BnA07G27460D, was identified in this Rlm1 region. BnA07G27460D encodes a serine/threonine dual specificity protein kinase, catalytic domain and is homologous to STN7 in predicted genes of B. rapa and B. oleracea, and A. thaliana. Robust SNP markers associated with Rlm1 were developed, which can assist in introgression of Rlm1 and confirm the presence of Rlm1 gene in canola breeding programs.

The Generation of Doubled Haploid Lines for QTL Mapping

Recombinant inbred lines (RILs) are an essential tool for quantitative trait locus (QTL) mapping in Arabidopsis thaliana. Conventionally, the development of these lines is a time-consuming and tedious process requiring six to eight generations of selfing. Here, we describe an alternative approach: the rapid generation of RILs in A. thaliana via the creation of doubled haploids. In this method, F₁ plants are crossed to an engineered haploid inducer to produce haploid plants. The chromosomes of these haploids then spontaneously double, generating immortalized homozygous F₂ lines called doubled haploid RILs (DH RILs). Finally, DH RILs are genotyped using low-coverage whole-genome sequencing and are ready to be used for QTL mapping.

Molecular Mapping and QTL for Expression Profiles of Flavonoid Genes in Brassica napus

Flavonoids are secondary metabolites that are extensively distributed in the plant kingdom and contribute to seed coat color formation in rapeseed. To decipher the genetic networks underlying flavonoid biosynthesis in rapeseed, we constructed a high-density genetic linkage map with 1089 polymorphic loci (including 464 SSR loci, 97 RAPD loci, 451 SRAP loci, and 75 IBP loci) using recombinant inbred lines (RILs). The map consists of 19 linkage groups and covers 2775 cM of the B. napus genome with an average distance of 2.54 cM between adjacent markers. We then performed expression quantitative trait locus (eQTL) analysis to detect transcript-level variation of 18 flavonoid biosynthesis pathway genes in the seeds of the 94 RILs. In total, 72 eQTLs were detected and found to be distributed among 15 different linkage groups that account for 4.11% to 52.70% of the phenotypic variance atrributed to each eQTL. Using a genetical genomics approach, four eQTL hotspots together harboring 28 eQTLs associated with 18 genes were found on chromosomes A03, A09, and C08 and had high levels of synteny with genome sequences of A. thaliana and Brassica species. Associated with the trans-eQTL hotspots on chromosomes A03, A09, and C08 were 5, 17, and 1 genes encoding transcription factors, suggesting that these genes have essential roles in the flavonoid biosynthesis pathway. Importantly, bZIP25, which is expressed specifically in seeds, MYC1, which controls flavonoid biosynthesis, and the R2R3-type gene MYB51, which is involved in the synthesis of secondary metabolites, were associated with the eQTL hotspots, and these genes might thus be involved in different flavonoid biosynthesis pathways in rapeseed. Hence, further studies of the functions of these genes will provide insight into the regulatory mechanism underlying flavonoid biosynthesis, and lay the foundation for elaborating the molecular mechanism of seed coat color formation in B. napus.

Identification and genetic characterization by high-throughput SNP analysis of intervarietal substitution lines of rapeseed (Brassica napus L.) with enhanced embryogenic potential

Seven intervarietal substitution lines were identified with embryogenic potentials up to 40.4 times that of the recurrent parent, providing an ideal material for further in depth studies of this trait. To identify genomic regions that carry genetic factors controlling embryogenic potential of isolated microspores of rapeseed, marker segregations were analysed in a segregating population of haploid microspore-derived embryos and a BC1 population from a cross between 'Express 617' and 'RS239'. After map construction 15 intervarietal substitution lines from the same cross with 'Express 617' as recurrent parent were selected with donor segments covering five genomic regions that had shown skewed segregations in the population of microspore-derived embryos but not in the BC1 population. By comparing the embryogenic potential of microspores of the 15 substitution lines and 'Express 617', seven lines were identified with significantly enhanced embryogenic potential ranging from 4.1 to 40.4 times that of 'Express 617'. To improve the genetic characterization of the selected lines, they were subjected to a high-throughput SNP analysis using the Illumina Infinium 60K chip for rapeseed. Based on 7,960 mapped SNP markers, one to eight donor segments per line, which cover 0.64-6.79% of the 2,126.1 cM of the SNP map, were found. The SNP analysis also gave evidence that homoeologous exchanges had occurred during the development of the substitution line population, increasing the genetic diversity within this population. By comparing donor segments between lines with significantly enhanced embryogenic potential and non-significant lines, 12 genomic regions were identified that may contain genetic factors controlling embryogenic potential in rapeseed. These regions range in size from 0 (represented by just one marker) to 26.8 cM and cover together just 5.42% of the SNP map.

Quantitative trait loci for thermal time to flowering and photoperiod responsiveness discovered in summer annual-type Brassica napus L

Time of flowering is a key adaptive trait in plants and is conditioned by the interaction of genes and environmental cues including length of photoperiod, ambient temperature and vernalisation. Here we investigated the photoperiod responsiveness of summer annual-types of Brassica napus (rapeseed, canola). A population of 131 doubled haploid lines derived from a cross between European and Australian parents was evaluated for days to flowering, thermal time to flowering (measured in degree-days) and the number of leaf nodes at flowering in a compact and efficient glasshouse-based experiment with replicated short and long day treatments. All three traits were under strong genetic control with heritability estimates ranging from 0.85–0.93. There was a very strong photoperiod effect with flowering in the population accelerated by 765 degree-days in the long day versus short day treatments. However, there was a strong genetic correlation of line effects (0.91) between the long and short day treatments and relatively low genotype x treatment interaction indicating that photoperiod had a similar effect across the population. Bivariate analysis of thermal time to flowering in short and long days revealed three main effect quantitative trait loci (QTLs) that accounted for 57.7% of the variation in the population and no significant interaction QTLs. These results provided insight into the contrasting adaptations of Australian and European varieties. Both parents responded to photoperiod and their alleles shifted the population to earlier flowering under long days. In addition, segregation of QTLs in the population caused wide transgressive segregation in thermal time to flowering. Potential candidate flowering time homologues located near QTLs were identified with the aid of the Brassica rapa reference genome sequence. We discuss how these results will help to guide the breeding of summer annual types of B. napus adapted to new and changing environments.

A consensus map of rapeseed (Brassica napus L.) based on diversity array technology markers: applications in genetic dissection of qualitative and quantitative traits

Background

Dense consensus genetic maps based on high-throughput genotyping platforms are valuable for making genetic gains in Brassica napus through quantitative trait locus identification, efficient predictive molecular breeding, and map-based gene cloning. This report describes the construction of the first B. napus consensus map consisting of a 1,359 anchored array based genotyping platform; Diversity Arrays Technology (DArT), and non-DArT markers from six populations originating from Australia, Canada, China and Europe. We aligned the B. napus DArT sequences with genomic scaffolds from Brassica rapa and Brassica oleracea, and identified DArT loci that showed linkage with qualitative and quantitative loci associated with agronomic traits.

Results

The integrated consensus map covered a total of 1,987.2 cM and represented all 19 chromosomes of the A and C genomes, with an average map density of one marker per 1.46 cM, corresponding to approximately 0.88 Mbp of the haploid genome. Through in silico physical mapping 2,457 out of 3,072 (80%) DArT clones were assigned to the genomic scaffolds of B. rapa (A genome) and B. oleracea (C genome). These were used to orientate the genetic consensus map with the chromosomal sequences. The DArT markers showed linkage with previously identified non-DArT markers associated with qualitative and quantitative trait loci for plant architecture, phenological components, seed and oil quality attributes, boron efficiency, sucrose transport, male sterility, and race-specific resistance to blackleg disease.

Conclusions

The DArT markers provide increased marker density across the B. napus genome. Most of the DArT markers represented on the current array were sequenced and aligned with the B. rapa and B. oleracea genomes, providing insight into the Brassica A and C genomes. This information can be utilised for comparative genomics and genomic evolution studies. In summary, this consensus map can be used to (i) integrate new generation markers such as SNP arrays and next generation sequencing data; (ii) anchor physical maps to facilitate assembly of B. napus genome sequences; and (iii) identify candidate genes underlying natural genetic variation for traits of interest.

Construction and analysis of a high-density genetic linkage map in cabbage (Brassica oleracea L. var. capitata)

Background

Brassica oleracea encompass a family of vegetables and cabbage that are among the most widely cultivated crops. In 2009, the B. oleracea Genome Sequencing Project was launched using next generation sequencing technology. None of the available maps were detailed enough to anchor the sequence scaffolds for the Genome Sequencing Project. This report describes the development of a large number of SSR and SNP markers from the whole genome shotgun sequence data of B. oleracea, and the construction of a high-density genetic linkage map using a double haploid mapping population.

Results

The B. oleracea high-density genetic linkage map that was constructed includes 1,227 markers in nine linkage groups spanning a total of 1197.9 cM with an average of 0.98 cM between adjacent loci. There were 602 SSR markers and 625 SNP markers on the map. The chromosome with the highest number of markers (186) was C03, and the chromosome with smallest number of markers (99) was C09.

Conclusions

This first high-density map allowed the assembled scaffolds to be anchored to pseudochromosomes. The map also provides useful information for positional cloning, molecular breeding, and integration of information of genes and traits in B. oleracea. All the markers on the map will be transferable and could be used for the construction of other genetic maps.

Molecular mapping of resistance to Leptosphaeria maculans in Australian cultivars of Brassica napus

Doubled haploid (DH) lines together with a cotyledon bioassay were employed for the molecular analysis of resistance to the blackleg fungus Leptosphaeria maculans in the Australian Brassica napus cultivars Shiralee and Maluka. We used bulked segregant analysis to identify 13 RAPD and two RFLP markers linked to the resistance phenotype and mapped these markers in the segregating DH population. Our data suggest the presence of a single major locus controlling resistance in the cultivar Shiralee, confirming our previous results obtained from Mendelian genetic analyses. In addition, preliminary mapping data for the cultivar Maluka also support a single locus model for resistance and indicate that the resistance genes from 'Shiralee' and 'Maluka' are either linked or possibly identical. The molecular markers identified in this study should be a useful tool for breeding blackleg resistant varieties using marker-assisted selection, and are the essential first step towards the map-based cloning of this resistance gene.

A comparison of RFLP maps based on anther culture derived, selfed, and hybrid progenies of Solanum chacoense

Comparative RFLP linkage maps were constructed using five segregating populations derived from two self-incompatible lines (termed PI 230582 and PI 458314) of diploid tuber-bearing Solanum chacoense Bitt. The analysis was based on 84 RFLP loci identified by 73 different cDNA clones. Distortion of expected Mendelian segregation ratios was observed; less than 10% of the markers showed a skewed segregation in the gametes forming the F1, hybrid population compared with 30% in the selfed population and 46 and 70% in the two populations produced by anther culture. For the anther culture derived populations, most of the skewed loci were scattered throughout the genome, whereas in the populations derived from selfing, they were found primarily in linkage group 1, around the S locus. In this study, we also found that the rate of meiotic recombination could differ between the male and female gametes produced by our parental lines. Thus, male gametes of line PI 458314 showed significantly less recombination as assessed by the total length of the map (206 cM for male gametes vs. 375 cM for female gametes) and the phenomenon was genome-wide. In contrast, the maps from the gametes of PI 230582 had about the same length, but some linkage groups were longer in the female gametes, while others were longer in the male gametes. Key words : Solanum chacoense, RFLP, anther culture, skewed segregation, self-incompatibility, sex differences in recombination.

Conserved patterns of chromosome pairing and recombination in Brassica napus crosses

The patterns of chromosome pairing and recombination in two contrasting Brassica napus F1 hybrids were deduced. One hybrid was from a winter oilseed rape (WOSR) x spring oilseed rape cross, the other from a resynthesized B. napus x WOSR cross. Segregation at 211 equivalent loci assayed in the population derived from each hybrid produced two collinear genetic maps. Alignment of the maps indicated that B. napus chromosomes behaved reproducibly as 19 homologous pairs and that the 19 distinct chromosomes of B. napus each recombined with unique chromosomes from the interspecific hybrid between Brassica rapa and Brassica oleracea. This result indicated that the genomes of the diploid progenitors of amphidiploid B. napus have remained essentially unaltered since the formation of the species and that the progenitor genomes were similar to those of modern-day B. rapa and B. oleracea. The frequency and distribution of crossovers were almost indistinguishable in the two populations, suggesting that the recombination machinery of B. napus could cope easily with different degrees of genetic divergence between homologous chromosomes. Efficient recombination in wide crosses will facilitate the introgression of novel alleles into oilseed rape from B. rapa and B. oleracea (via resynthesized B. napus) and reduce linkage drag.

Frequent nonreciprocal translocations in the amphidiploid genome of oilseed rape (Brassica napus)

A RFLP map of Brassica napus, consisting of 277 loci arranged in 19 linkage groups, was produced from genetic segregation in a combined population of 174 doubled-haploid microspore-derived lines. The integration of this map with a B. napus map derived from a resynthesized B. napus x oilseed rape cross allowed the 10 linkage groups of the B. napus A genome and the 9 linkage groups of the C genome to be identified. Collinear patterns of marker loci on different linkage groups suggested potential partial homoeologues. RFLP patterns consistent with aberrant chromosomes were observed in 9 of the 174 doubled-haploid lines. At least 4 of these lines carried nonreciprocal, homoeologous translocations. These translocations were probably the result of homoeologous recombination in the amphidiploid genome of oilseed rape, suggesting that domesticated B. napus is unable to control chromosome pairing completely. Evidence for genome homogenization in oilseed rape is presented and its implications on genetic mapping in amphidiploid species is discussed. The level of polymorphism in the A genome was higher than that in the C genome and this might be a general property of oilseed rape crosses.

Identification of the A and C genomes of amphidiploid Brassica napus (oilseed rape)

A genetic linkage map consisting of 399 RFLP-defined loci was generated from a cross between resynthesized Brassica napus (an interspecific B. rapa x B. oleracea hybrid) and "natural" oilseed rape. The majority of loci exhibited disomic inheritance of parental alleles demonstrating that B. rapa chromosomes were each pairing exclusively with recognisable A-genome homologues in B. napus and that B. oleracea chromosomes were pairing similarly with C-genome homologues. This behaviour identified the 10 A genome and 9 C genome linkage groups of B. napus and demonstrated that the nuclear genomes of B. napus, B. rapa, and B. oleracea have remained essentially unaltered since the formation of the amphidiploid species, B. napus. A range of unusual marker patterns, which could be explained by aneuploidy and nonreciprocal translocations, were observed in the mapping population. These chromosome abnormalities were probably caused by associations between homoeologous chromosomes at meiosis in the resynthesized parent and the F1 plant leading to nondisjunction and homoeologous recombination.

Indistinguishable patterns of recombination resulting from male and female meioses in Brassica napus (oilseed rape)

An F1 individual derived from a cross between two distinct lines of spring oilseed rape (Brassica napus) was used to produce a pair of complementary backcross populations, each consisting of 90 individuals. The F1 donated male gametes to the Male population and female gametes to the Female population. Genetic maps were generated from both populations and aligned using 117 common loci to form an integrated genome map of B. napus with 243 RFLP-defined loci. A comparison of the frequency and distribution of crossovers in the two populations of F1 gametes (assayed in the Male and Female populations) detected no differences. The genetic maps derived from the Male and Female populations each consisted of 19 linkage groups spanning 1544 and 1577 cM, respectively. The maps were aligned with other B. napus maps, and all 19 equivalent linkage groups were unambiguously assigned. The genetic size and general organisation of the new maps were comparable with those of pre-existing B. napus maps in most respects, except that the levels of polymorphism in the constituent A and C genomes were unusually similar in the new cross.

A new broccoli × broccoli immortal mapping population and framework genetic map: tools for breeders and complex trait analysis

A unique broccoli × broccoli doubled haploid (DH) population has been created from the F(1) of a cross between two DH broccoli lines derived from cultivars Green Duke and Marathon. We genotyped 154 individuals from this population with simple sequence repeat and amplified fragment length polymorphism markers to create a B. oleracea L. var. italica 'intra-crop' specific framework linkage map. The map is composed of nine linkage groups with a total length of 946.7 cM. Previous published B. oleracea maps have been constructed using diverse crosses between morphotypes of B. oleracea; this map therefore represents a useful breeding resource for the dissection of broccoli specific traits. Phenotype data have been collected from the population over five growing seasons; the framework linkage map has been used to locate quantitative trait loci for agronomically important broccoli traits including head weight (saleable yield), head diameter, stalk diameter, weight loss and relative weight loss during storage, as well as traits for broccoli leaf architecture. This population and associated linkage map will aid breeders to directly map agronomically important traits for the improvement of elite broccoli cultivars.

Mapping of quantitative trait loci and development of allele-specific markers for seed weight in Brassica napus

Seed weight is an important component of grain yield in oilseed rape (Brassica napus L.), but the genetic basis for the important quantitative trait is still not clear. In order to identify the genes for seed weight in oilseed rape, QTL mapping for thousand seed weight (TSW) was conducted with a doubled haploid (DH) population and an F(2) population. A complete linkage map of the DH population was constructed using 297 simple sequence repeat (SSR) markers. Among nine TSW QTLs detected, two major QTLs, TSWA7a and TSWA7b, were stably identified across years and collectively explained 27.6-37.9% of the trait variation in the DH population. No significant epistatic interactions for TSW detected in the DH population indicate that the seed weight variation may be primarily attributed to additive effects. The stability and significance of TSWA7a and TSWA7b were further validated in the F(2) population with different genetic backgrounds. By cloning BnMINI3a and BnTTG2a, two B. napus homologous genes to Arabidopsis thaliana, allele-specific markers were developed for TSWA5b and TSWA5c, two TSW QTLs on A5, respectively. The importance of the major and minor QTLs identified was further demonstrated by analysis of the allelic effects on TSW in the DH population.

Crossovers get a boost in Brassica allotriploid and allotetraploid hybrids

Meiotic crossovers are necessary to generate balanced gametes and to increase genetic diversity. Even if crossover number is usually constrained, recent results suggest that manipulating karyotype composition could be a new way to increase crossover frequency in plants. In this study, we explored this hypothesis by analyzing the extent of crossover variation in a set of related diploid AA, allotriploid AAC, and allotetraploid AACC Brassica hybrids. We first used cytogenetic methods to describe the meiotic behavior of the different hybrids. We then combined a cytogenetic estimation of class I crossovers in the entire genome by immunolocalization of a key protein, MutL Homolog1, which forms distinct foci on meiotic chromosomes, with genetic analyses to specifically compare crossover rates between one pair of chromosomes in the different hybrids. Our results showed that the number of crossovers in the allotriploid AAC hybrid was higher than in the diploid AA hybrid. Accordingly, the allotetraploid AACC hybrid showed an intermediate behavior. We demonstrated that this increase was related to hybrid karyotype composition (diploid versus allotriploid versus allotetraploid) and that interference was maintained in the AAC hybrids. These results could provide another efficient way to manipulate recombination in traditional breeding and genetic studies.

The construction of a genetic linkage map of non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino)

Non-heading Chinese cabbage (Brassica campestris ssp. chinensis Makino) is one of the most important vegetables in eastern China. A genetic linkage map was constructed using 127 doubled haploid (DH) lines, and the DH population was derived from a commercial hybrid "Hanxiao" (lines SW-13 x L-118). Out of the 614 polymorphic markers, 43.49% were not assigned to any of the linkage groups(LGs). Chi-square tests showed that 42.67% markers were distorted from expected Mendelian segregation ratios, and the direction of distorted segregation was mainly toward the paternal parent L-118. After sequentially removing the markers that had an interval distance smaller than 1 cM from the upper marker, the overall quality of the linkage map was increased. Two hundred and sixty-eight molecular markers were mapped into 10 LGs, which were anchored to the corresponding chromosome of the B. rapa reference map based on common simple sequence repeat (SSR) markers. The map covers 973.38 cM of the genome and the average interval distance between markers was 3.63 cM. The number of markers on each LG ranged from 18 (R08) to 64 (R07), with an average interval distance within a single LG from 1.70 cM (R07) to 6.71 cM (R06). Among these mapped markers, 169 were sequence-related amplified polymorphism (SRAP) molecular markers, 50 were SSR markers and 49 were random amplification polymorphic DNA (RAPD) markers. With further saturation to the LG, the current map offers a genetic tool for loci analysis for important agronomic traits.

Repetitive sequence-derived markers tag centromeres and telomeres and provide insights into chromosome evolution in Brassica napus

Centromeres and telomeres are obvious markers on chromosomes but their location on genetic maps is difficult to determine, which hampers many basic and applied research programmes. In this study, we used the characteristic distribution of five Brassica repeated sequences to generate physically anchored molecular markers tentatively tagging Brassica centromeres (84 markers) and telomeres (31 markers). These markers were mapped to the existing oilseed rape genetic map. Clusters of centromere-related loci were observed on 14 linkage groups; in addition to previous reports, we could thus provide information about the most likely position of centromeres on 17 of the 19 B. napus linkage groups. The location of centromeres on linkage groups usually matches their position on chromosomes and coincides with sites of evolutionary breakage between chromosomes. Most telomere sequence-derived markers mapped interstitially or in the proximity of centromeres; this result echoes previous reports on many eukaryote genomes and may reflect different forms of chromosome evolution. Seven telomere sequence-derived markers were located at the outermost positions of seven linkage groups and therefore probably tagged telomeres.

Chromosome 'speed dating' during meiosis of polyploid Brassica hybrids and haploids

Given their tremendous importance for correct chromosome segregation, the number and distribution of crossovers are tightly controlled during meiosis. In this review, we give an overview of crossover formation in polyploid Brassica hybrids and haploids that illustrates or underscores several aspects of crossover control. We first demonstrate that multiple targets for crossover formation (i.e. different but related chromosomes or duplicated regions) are sorted out during meiosis based on their level of relatedness. In euploid Brassica napus (AACC; 2n = 38), crossovers essentially occur between homologous chromosomes and only a few of them form between homeologues. The situation is different in B. napus haploids in which crossovers preferentially occur between homeologous chromosomes and a few can then form between more divergent duplicated regions. We then provide evidence that the frequency of crossovers between a given pair of chromosomes is influenced by the karyotypic and genetic composition of the plants that undergo meiosis. For instance, genetic evidence indicates that the number of crossovers between exactly the same pairs of homologous A chromosomes gets a boost in Brassica digenomic tetraploid (AACC) and triploid (AAC) hybrids. Increased autosyndesis within B. napus haploids as compared to monoploid B. rapa and B. oleracea is another illustration of this process. All these observations may suggest that polyploidization overall boosts up crossover machinery and/or that the number of crossovers is modulated through inter-bivalents or univalent-bivalent cross-talk effects. The last part of this review gives an up-to-date account of what we know about the genetic control of homologous and homeologous crossover formation among Brassica species.

Localization of QTLs for seed color using recombinant inbred lines of Brassica napus in different environments

Yellow seed is one of the most important traits of Brassica napus L. Efficient selection of the yellow-seed trait is one of the most important objectives in oilseed rape breeding. Two recombinant inbred line (RIL) populations (RIL-1 and RIL-2) were analyzed for 2 years at 2 locations. Four hundred and twenty SSR, RAPD, and SRAP marker loci covering 1744 cM were mapped in 26 linkage groups of RIL-1, while 265 loci covering 1135 cM were mapped in 20 linkage groups of RIL-2. A total of 19 QTLs were detected in the 2 populations. A major QTL was detected adjacent to the same marker (EM11ME20/200) in both maps in both years. This major QTL could explain 53.71%, 39.34%, 42.42%, 30.18%, 24.86%, and 15.08% of phenotypic variation in 6 combinations (location x year x population). BLASTn analysis of the sequences of the markers flanking the major QTL revealed that the homologous region corresponding to this major QTL was anchored between genes At5g44440 and At5g49640 of Arabidopsis thaliana chromosome 5 (At C5). Based on comparative genomic analysis, the bifunctional gene TT10 is nearest to the homologue of EM11ME20/200 on At C5 and can be considered an important candidate gene for the major QTL identified here. Besides providing an effective strategy for marker-assisted selection of the yellow-seed trait in B. napus, our results also provide important clues for cloning of the candidate gene corresponding to this major QTL.

Analysis of gene expression profiles in response to Sclerotinia sclerotiorum in Brassica napus

Sclerotinia sclerotiorum is a necrotrophic plant pathogen which causes serious disease in agronomically important crop species. The molecular basis of plant defense to this pathogen is poorly understood. We investigated gene expression changes associated with S. sclerotiorum infection in a partially resistant and a susceptible genotype of oilseed Brassica napus using a whole genome microarray from Arabidopsis. A total of 686 and 1,547 genes were found to be differentially expressed after infection in the resistant and susceptible genotypes, respectively. The number of differentially expressed genes increased over infection time with the majority being up-regulated in both genotypes. The putative functions of the differentially expressed genes included pathogenesis-related (PR) proteins, proteins involved in the oxidative burst, protein kinase, molecule transporters, cell maintenance and development, abiotic stress, as well as proteins with unknown functions. The gene regulation patterns indicated that a large part of the defense response exhibited as a temporal and quantitative difference between the two genotypes. Genes associated with jasmonic acid (JA) and ethylene signal transduction pathways were induced, but no salicylic acid (SA) responsive genes were identified. Candidate defense genes were identified by integration of the early response genes in the partially resistant line with previously mapped quantitative trait loci (QTL). Expression levels of these genes were verified by Northern blot analyses. These results indicate that genes encoding various proteins involved in diverse roles, particularly WRKY transcription factors and plant cell wall related proteins may play an important role in the defense response to S. sclerotiorum disease.

Genomic changes in resynthesized Brassica napus and their effect on gene expression and phenotype

Many previous studies have provided evidence for genome changes in polyploids, but there are little data on the overall population dynamics of genome change and whether it causes phenotypic variability. We analyzed genetic, epigenetic, gene expression, and phenotypic changes in approximately 50 resynthesized Brassica napus lines independently derived by hybridizing double haploids of Brassica oleracea and Brassica rapa. A previous analysis of the first generation (S0) found that genetic changes were rare, and cytosine methylation changes were frequent. Our analysis of a later generation found that most S0 methylation changes remained fixed in their S5 progeny, although there were some reversions and new methylation changes. Genetic changes were much more frequent in the S5 generation, occurring in every line with lines normally distributed for number of changes. Genetic changes were detected on 36 of the 38 chromosomes of the S5 allopolyploids and were not random across the genome. DNA fragment losses within lines often occurred at linked marker loci, and most fragment losses co-occurred with intensification of signal from homoeologous markers, indicating that the changes were due to homoeologous nonreciprocal transpositions (HNRTs). HNRTs between chromosomes A1 and C1 initiated in early generations, occurred in successive generations, and segregated, consistent with a recombination mechanism. HNRTs and deletions were correlated with qualitative changes in the expression of specific homoeologous genes and anonymous cDNA amplified fragment length polymorphisms and with phenotypic variation among S5 polyploids. Our data indicate that exchanges among homoeologous chromosomes are a major mechanism creating novel allele combinations and phenotypic variation in newly formed B. napus polyploids.

The reference genetic linkage map for the multinational Brassica rapa genome sequencing project

We describe the construction of a reference genetic linkage map for the Brassica A genome, which will form the backbone for anchoring sequence contigs for the Multinational Brassica rapa Genome Sequencing Project. Seventy-eight doubled haploid lines derived from anther culture of the F(1) of a cross between two diverse Chinese cabbage (B. rapa ssp. pekinensis) inbred lines, 'Chiifu-401-42' (C) and 'Kenshin-402-43' (K) were used to construct the map. The map comprises a total of 556 markers, including 278 AFLP, 235 SSR, 25 RAPD and 18 ESTP, STS and CAPS markers. Ten linkage groups were identified and designated as R1-R10 through alignment and orientation using SSR markers in common with existing B. napus reference linkage maps. The total length of the linkage map was 1,182 cM with an average interval of 2.83 cM between adjacent loci. The length of linkage groups ranged from 81 to 161 cM for R04 and R06, respectively. The use of 235 SSR markers allowed us to align the A-genome chromosomes of B. napus with those of B. rapa ssp. pekinensis. The development of this map is vital to the integration of genome sequence and genetic information and will enable the international research community to share resources and data for the improvement of B. rapa and other cultivated Brassica species.

Mapping and characterization of FLC homologs and QTL analysis of flowering time in Brassica oleracea

The FLC gene product is an inhibitor of flowering in Arabidopsis. FLC homologs in Brassica species are thought to control vernalization. We cloned four FLC homologs (BoFLCs) from Brassica oleracea. Three of these, BoFLC1, BoFLC3 and BoFLC5, have been previously characterized. The fourth novel sequence displayed 98% sequence homology to the previously identified gene BoFLC4, but also showed 91% homology to BrFLC2 from Brassica rapa. Phylogenetic analysis showed that this clone belongs to the FLC2 clade. Therefore, we designated this gene BoFLC2. Based on the segregation of RFLP, SRAP, CAPS, SSR and AFLP loci, a detailed linkage map of B. oleracea was constructed in the F(2) progeny obtained from a cross of B. oleracea cv. Green Comet (broccoli; non-vernalization type) and B. oleracea cv. Reiho (cabbage; vernalization type), which covered 540 cM, 9 major linkage groups. Six quantitative trait loci (QTL) controlling flowering time were detected. BoFLC1, BoFLC3 and BoFLC5 were not linked to the QTLs controlling flowering time. However, the largest QTL effect was located in the region where BoFLC2 was mapped. Genotyping of F(2 )plants at the BoFLC2 locus showed that most of the early flowering plants were homozygotes of BoFLC-GC, whereas most of the late- and non-flowering plants were homozygotes of BoFLC-Rei. The BoFLC2 homologs present in plants of the non-vernalization type were non-functional, due to a frameshift in exon 4. Moreover, duplications and deletions of BoFLC2 were detected in broccoli and a rapid cycling line, respectively. These results suggest that BoFLC2 contributes to the control of flowering time in B. oleracea.

A comparative linkage map of oilseed rape and its use for QTL analysis of seed oil and erucic acid content

We have developed a new DH mapping population for oilseed rape, named TNDH, using genetically and phenotypically diverse parental lines. We used the population in the construction of a high stringency genetic linkage map, consisting of 277 loci, for use in quantitative genetic analysis. A proportion of the markers had been used previously in the construction of linkage maps for Brassica species, thus permitting the alignment of maps. The map includes 68 newly developed Sequence Tagged Site (STS) markers targeted to the homologues of defined genes of A. thaliana. The use of these markers permits the alignment of our linkage map with the A. thaliana genome sequence. An additional 74 loci (31 newly developed STS markers and 43 loci defined by SSR and RFLP markers that had previously been used in published linkage maps) were added to the map. These markers increased the resolution of alignment of the newly constructed linkage map with existing Brassica linkage maps and the A. thaliana genome sequence. We conducted field trials with the TNDH population at two sites, and over 2 years, and identified reproducible QTL for seed oil content and erucic acid content. The results provide new insights into the genetic control of seed oil and erucic acid content in oilseed rape, and demonstrate the utility of the linkage map and population.

Quantitative trait analysis of seed yield and other complex traits in hybrid spring rapeseed (Brassica napus L.): 1. Identification of genomic regions from winter germplasm

The introgression of winter germplasm into spring canola (Brassica napus L.) represents a novel approach to improve seed yield of hybrid spring canola. In this study, quantitative trait loci (QTL) for seed yield and other traits were genetically mapped to determine the effects of genomic regions introgressed from winter germplasm into spring canola. Plant materials used comprised of two populations of doubled haploid (DH) lines having winter germplasm introgression from two related French winter cultivars and their testcrosses with a spring line used in commercial hybrids. These populations were evaluated for 2 years at two locations (Wisconsin, USA and Saskatchewan, Canada). Genetic linkage maps based on RFLP loci were constructed for each DH population. Six QTL were detected in the testcross populations for which the winter alleles increased seed yield. One of these QTL explained 11 and 19% of the phenotypic variation in the two Canadian environments. The winter allele for another QTL that increased seed yield was linked in coupling to a QTL allele for high glucosinolate content, suggesting that the transition of rapeseed into canola could have resulted in the loss of favorable seed yield alleles. Most QTL for which the introgressed allele decreased seed yield of hybrids mapped to genomic regions having homoeologous non-reciprocal transpositions. This suggests that allelic configurations created by these rearrangements might make an important contribution to genetic variation for complex traits in oilseed B. napus and could account for a portion of the heterotic effects in hybrids.

Quantitative trait analysis of seed yield and other complex traits in hybrid spring rapeseed (Brassica napus L.): 2. Identification of alleles from unadapted germplasm

Unadapted germplasm may contain alleles that could improve hybrid cultivars of spring oilseed Brassica napus. Quantitative trait loci (QTL) mapping was used to identify potentially useful alleles from two unadapted germplasm sources, a Chinese winter cultivar and a re-synthesized B. napus, that increase seed yield when introgressed into a B. napus spring hybrid combination. Two populations of 160 doubled haploid (DH) lines were created from crosses between the unadapted germplasm source and a genetically engineered male-fertility restorer line (P1804). A genetically engineered male-sterile tester line was used to create hybrids with each DH line (testcrosses). The two DH line populations were evaluated in two environments and the two testcross populations were evaluated in three or four environments for seed yield and other agronomic traits. Several genomic regions were found in the two testcross populations which contained QTL for seed yield. The map positions of QTL for days to flowering and resistance to a bacterial leaf blight disease coincided with QTL for seed yield and other agronomic traits, suggesting the occurrence of pleiotropic or linked effects. For two hybrid seed yield QTL, the favorable alleles increasing seed yield originated from the unadapted parents, and one of these QTL was detected in multiple environments and in both populations. In this QTL region, a chromosome rearrangement was identified in P1804, which may have affected seed yield.

Simple sequence repeat-based comparative genomics between Brassica rapa and Arabidopsis thaliana: the genetic origin of clubroot resistance

An SSR-based linkage map was constructed in Brassica rapa. It includes 113 SSR, 87 RFLP, and 62 RAPD markers. It consists of 10 linkage groups with a total distance of 1005.5 cM and an average distance of 3.7 cM. SSRs are distributed throughout the linkage groups at an average of 8.7 cM. Synteny between B. rapa and a model plant, Arabidopsis thaliana, was analyzed. A number of small genomic segments of A. thaliana were scattered throughout an entire B. rapa linkage map. This points out the complex genomic rearrangements during the course of evolution in Cruciferae. A 282.5-cM region in the B. rapa map was in synteny with A. thaliana. Of the three QTL (Crr1, Crr2, and Crr4) for clubroot resistance identified, synteny analysis revealed that two major QTL regions, Crr1 and Crr2, overlapped in a small region of Arabidopsis chromosome 4. This region belongs to one of the disease-resistance gene clusters (MRCs) in the A. thaliana genome. These results suggest that the resistance genes for clubroot originated from a member of the MRCs in a common ancestral genome and subsequently were distributed to the different regions they now inhabit in the process of evolution.

Quantitative trait loci for resistance to Sclerotinia sclerotiorum and its association with a homeologous non-reciprocal transposition in Brassica napus L

Sclerotinia stem rot, caused by fungus Sclerotinia sclerotiorum, is one of the most devastating diseases in rapeseed (Brassica napus L.). We report the identification of Quantitative trait loci (QTL) involved in the resistance to S. sclerotiorum in two segregating populations of DH lines: the HUA population, derived from a cross between a partially resistant Chinese winter line (Hua dbl2) and a susceptible European spring line (P1804); and the MS population, derived from a partially resistant French winter cultivar (Major) and a susceptible Canadian spring cultivar (Stellar). A petiole inoculation technique and two scoring methods, days to wilt (DW) and stem lesion length (SLL), were used for the resistance assessment. A total of eight genomic regions affecting resistance were detected in the HUA population, with four of these regions affecting both measures of resistance. Only one region, which affected both measurements, was detected in the MS population. Individual QTL explained 6-22% of the variance. At five of the QTL from both populations, alleles from the resistant parent contributed to the resistance. QTL on N2 from the HUA population had the highest LOD score and R (2) value and was detected for SLL in the first evaluation. The N12 resistance allele in Hua dbl2 was detected in a region containing a homeologous non-reciprocal transposition (HNRT) from the resistance-containing portion of N2. This result suggests that QTL in the N12.N2 HNRT enhanced the resistance of Hua dbl2 by increasing the dosage of resistance genes. The relationship of QTL from different genetic backgrounds and their associations with other agronomic traits are discussed.

Patterns of sequence loss and cytosine methylation within a population of newly resynthesized Brassica napus allopolyploids

Allopolyploid formation requires the adaptation of two nuclear genomes within a single cytoplasm, which may involve programmed genetic and epigenetic changes during the initial generations following genome fusion. To study the dynamics of genome change, we synthesized 49 isogenic Brassica napus allopolyploids and surveyed them with 76 restriction fragment length polymorphism (RFLP) probes and 30 simple sequence repeat (SSR) primer pairs. Here, we report on the types and distribution of genetic and epigenetic changes within the S(1) genotypes. We found that insertion/deletion (indel) events were rare, but not random. Of the 57,710 (54,383 RFLP and 3,327 SSR) parental fragments expected among the amphidiploids, we observed 56,676 or 99.9%. Three loci derived from Brassica rapa had indels, and one indel occurred repeatedly across 29% (14/49) of the lines. Loss of one parental fragment was due to the 400-bp reduction of a guanine-adenine dinucleotide repeat-rich sequence. In contrast to the 4% (3/76) RFLP probes that detected indels, 48% (35/73) detected changes in the CpG methylation status between parental genomes and the S1 lines. Some loci were far more likely than others to undergo epigenetic change, but the number of methylation changes within each synthetic polyploid was remarkably similar to others. Clear de novo methylation occurred at a much higher frequency than de novo demethylation within allopolyploid sequences derived from B. rapa. Our results suggest that there is little genetic change in the S(0) generation of resynthesized B. napus polyploids. In contrast, DNA methylation was altered extensively in a pattern that indicates tight regulation of epigenetic changes.

Construction of an oilseed rape (Brassica napus L.) genetic map with SSR markers

We constructed a Brassica napus genetic map with 240 simple sequence repeats (SSR) primer pairs from private and public origins. SSR, or microsatellites, are highly polymorphic and efficient markers for the analysis of plant genomes. Our selection of primer pairs corresponded to 305 genetic loci that we were able to map. In addition, we also used 52 sequence-characterized amplified region primer pairs corresponding to 58 loci that were developed in our lab. Genotyping was performed on six F2 populations, corresponding to a total of 574 F2 individual plants, obtained according to an unbalanced diallel cross design involving six parental lines. The resulting consensus map presented 19 linkage groups ranging from 46.2 to 276.5 cM, which we were able to name after the B. napus map available at http://ukcrop.net/perl/ace/search/BrassicaDB , thus enabling the identification of the A genome linkage groups originating from the B. rapa ancestor and the C genome linkage groups originating from the B. oleracea ancestor in the amphidiploid genome of B. napus. Some homologous regions were identified between the A and the C genomes. This map could be used to identify more markers, which would eventually be linked to genes controlling important agronomic characters in rapeseed. Furthermore, considering the good genome coverage we obtained, together with an observed homogenous distribution of the loci across the genome, this map is a powerful tool to be used in marker-assisted breeding.

Detection of chromosomal rearrangements derived from homologous recombination in four mapping populations of Brassica napus L

Genetic maps of Brassica napus were constructed from four segregating populations of doubled haploid lines. Each mapping population had the same male parent and used the same set of RFLP probes, facilitating the construction of a consensus map. Chromosomal rearrangements were identified in each population by molecular marker analysis and were classified as de novo homologous nonreciprocal transpositions (HNRTs), preexisting HNRTs, and homologous reciprocal transpositions (HRTs). Ninety-nine de novo HNRTs were identified by the presence of a few lines having duplication of a chromosomal region and loss of the corresponding homologous region. These de novo HNRTs were more prevalent in one population that had a resynthesized B. napus as a parent. Preexisting HNRTs were identified by fragment duplication or fragment loss in many DH lines due to the segregation of HNRTs preexisting in one of the parents. Nine preexisting HNRTs were identified in the three populations involving natural B. napus parents, which likely originated from previous homologous exchanges. The male parent had a previously described HRT between N7 and N16, which segregated in each population. These data suggest that chromosomal rearrangements caused by homologous recombination are widespread in B. napus. The effects of these rearrangements on allelic and phenotypic diversity are discussed.

A Cluster of Major Specific Resistance Genes to Leptosphaeria maculans in Brassica napus

ABSTRACT Two types of genetic resistance to Leptosphaeria maculans usually are distinguished in Brassica napus: qualitative, total resistance expressed at the seedling stage and quantitative, partial resistance expressed at the adult plant stage. The latter is under the control of many genetic factors that have been mapped through quantitative trait loci (QTL) studies using 'Darmor' resistance. The former usually is ascribed to race-specific resistance controlled by single resistance to L. maculans (Rlm) genes. Three B. napus-originating specific Rlm genes (Rlm1, Rlm2, and Rlm4) previously were characterized. Here, we report on the genetic identification of two novel resistance genes, Rlm3 and Rlm7, corresponding to the avirulence genes AvrLm3 and AvrLm7. The identification of a novel L. maculans- B. napus specific interaction allowed the detection of another putative new specific resistance gene, Rlm9. The resistance genes were mapped in two genomic regions on LG10 and LG16 linkage groups. A cluster of five resistance genes (Rlm1, Rlm3, Rlm4, Rlm7, and Rlm9) was strongly suggested on LG10. The relation between all these specific resistance genes and their potential role in adult-plant field resistance is discussed. These two Rlm-carrying regions do not correspond to major QTL for Darmor quantitative resistance.

DNA markers in plant improvement: an overview

The progress made in DNA marker technology has been tremendous and exciting. DNA markers have provided valuable tools in various analyses ranging from phylogenetic analysis to the positional cloning of genes. The development of high-density molecular maps which has been facilitated by PCR-based markers, have made the mapping and tagging of almost any trait possible. Marker-assisted selection has the potential to deploy favorable gene combinations for disease control. Comparative studies between incompatible species using these markers has resulted in synteny maps which are useful not only in predicting genome organization and evolution but also have practical application in plant breeding. DNA marker technology has found application in fingerprinting genotypes, in determining seed purity, in systematic sampling of germplasm, and in phylogenetic analysis. This review discusses the use of this technology for the genetic improvement of plants.

Detection and Effects of a Homeologous Reciprocal Transposition in Brassica napus

A reciprocal chromosomal transposition was identified in several annual oilseed Brassica napus genotypes used as parents in crosses to biennial genotypes for genetic mapping studies. The transposition involved an exchange of interstitial homeologous regions on linkage groups N7 and N16, and its detection was made possible by the use of segregating populations of doubled haploid lines and codominant RFLP markers. RFLP probes detected pairs of homeologous loci on N7 and N16 for which the annual and biennial parents had identical alleles in regions expected to be homeologous. The existence of an interstitial reciprocal transposition was confirmed by cytological analysis of synaptonemal complexes of annual × biennial F1 hybrids. Although it included approximately one-third of the physical length of the N7 and N16 chromosomes, few recombination events within the region were recovered in the progenies of the hybrids. Significantly higher seed yields were associated with the parental configurations of the rearrangement in segregating progenies. These progenies contained complete complements of homeologous chromosomes from the diploid progenitors of B. napus, and thus their higher seed yields provide evidence for the selective advantage of allopolyploidy through the fixation of intergenomic heterozygosity.

Mapping the mosaic of ancestral genotypes in a cultivar of oilseed rape (Brassica napus) selected via pedigree breeding

Recent oilseed rape breeding has produced low glucosinolate cultivars that yield proteinaceous meal suitable for animal feed. The low glucosinolate character was introduced into modern cultivars from Brassica napus 'Bronowski', a cultivar that is agronomically inferior in most other respects. Residual segments of 'Bronowski' genotype in modern cultivars probably cause reduced yield, poorer winter hardiness, and lower oil content. The quantity and distribution of the 'Bronowski' genotype in the modern oilseed rape cultivar Brassica napus 'Tapidor' was investigated using a segregating population derived from a cross between 'Tapidor' and its high glucosinolate progenitor. This population was analyzed with 65 informative Brassica RFLP probes and a genetic linkage map, based on the segregation at 77 polymorphic loci, was constructed. The mapping identified 15 residual segments of donor genotype in 'Tapidor', which together occupy approximately 29% of the B. napus genome. Mapping the loci that control variation for the accumulation of total seed glucosinolates in the segregating population has identified three loci that together explain >90% of the variation for this character. All of these loci are in donor segments of the 'Tapidor' genome. This result shows the extent to which conventional breeding programmes have difficulty in eliminating residual segments of donor genotype from elite material.

Genetic analysis and genome mapping in Raphanus

The first genetic map of the Raphanus genome was developed based on meiosis in a hybrid between Raphanus sativus (cultivated radish) and Raphanus raphanistrum (wild radish). This hybrid was used to produce a BC1 population of 54 individuals and an F2 population of 85 individuals. A total of 236 marker loci were assayed in these populations using a set of 144 informative Brassica RFLP probes previously used for genetic mapping in other crucifer species. The genetic maps derived from the BC1 and F2 populations were perfectly collinear and were integrated to produce a robust Raphanus map. Cytological observations demonstrated strict bivalent pairing in the R. sativus x R. raphanistrum hybrids. Productive pairing along the length of each chromosome was confirmed by the identification of nine extensive linkage groups and the lack of clustering of marker loci. Indeed, the distributions of both marker loci and crossovers was more random than those reported for other crop species. The genetic markers and the reference map of Raphanus will be of considerable value for future trait mapping and marker-assisted breeding in this crop, as well as in the intergenomic transfer of Raphanus genes into Brassica crops. The future benefits of comparative mapping with Arabidopsis and Brassica species are also discussed.

Homoeologous loci control the accumulation of seed glucosinolates in oilseed rape (Brassica napus)

The genetic control of seed glucosinolate content in oilseed rape was investigated using two intervarietal backcross populations. Four QTLs segregating in the population derived from a Brassica napus L. 'Victor' x Brassica napus L. 'Tapidor' cross, together accounting for 76% of the phenotypic variation, were mapped. Three of these loci also appeared to control the accumulation of seed glucosinolates in a Brassica napus L. 'Bienvenu' x 'Tapidor' cross, and accounted for 86% of the phenotypic variation. The three QTLs common to both populations mapped to homoeologous regions of the B. napus genome, suggesting that seed glucosinolate accumulation is controlled by duplicate genes. It was possible to extend the comparative analysis of QTLs controlling seed glucosinolate accumulation by aligning the published genetic maps generated by several research groups. This comparative mapping demonstrated that high-glucosinolate varieties often carry low-glucosinolate alleles at one or more of the loci controlling seed glucosinolate accumulation.

Genetic analysis of loci associated with partial resistance to Sclerotinia sclerotiorum in rapeseed (Brassica napus L.)

Sclerotinia stem rot is the most devastating disease of rapeseed (Brassica napus L.) in China. Quantitative trait loci (QTLs) involved in resistance to Sclerotinia sclerotiorum were detected in a rapeseed population of 128-F(2:3) families derived from a cross between the male sterility restorer line H5200 and a partial resistant line Ning RS-1. A total of 107 molecular markers including 72 RFLPs, 30 AFLPs, 3 SSRs and 2 RAPDs were employed to construct a genetic linkage map with 23 linkage groups covering 1,625.7 cM with an average space of 15.2 cM. Resistance was assessed empirically at two developmental stages: with a detached leaf inoculation at the seedling stage and in vivo stem inoculation at the mature plant stage. The observed resistance was scored for each plant as leaf resistance at the seedling stage (LRS) and stem resistance at the mature plant stage (SRM). A total of 13 loci were identified by one-way ANOVA and six QTLs were detected with MapMaker-QTL. We found that three of the six QTLs were associated with leaf resistance at the seedling stage and collectively accounted for 40.7% of the total phenotypic variation, each accounting for 23.2%, 16.6% and 13.6% respectively. Three QTLs were found corresponding to the disease resistance at the mature plant stage, explaining 49.0% of the phenotypic variation. Epistasis was observed for the resistance and the additive by additive interactions were the predominant type of epistasis. It was concluded that both single-locus QTLs and epistatic interactions played important roles in Sclerotinia resistance in rapeseed.

Construction of an RAPD linkage map and localization of QTLs for oleic acid level using recombinant inbreds in mustard (Brassica juncea)

RAPD markers were employed for construction of a linkage map and localization of QTLs for oleic acid level using a set of 94 recombinant inbred lines (RILs) of mustard (Brassica juncea L.) as a mapping population. Only 30% of the 235 random primers used were useful in terms of polymorphism detected and the reproducibility of those patterns. Normal Mendelian segregation was observed for the majority of the 130 markers obtained with 71 informative primers; only 13.1% deviated (P < 0.01) from the expected 1:1 ratio. One-hundred and fourteen markers were assigned to 21 linkage groups (LGs) covering a total length of 790.4 cM with an average distance of 6.93 cM between markers. Two quantitative trait loci (QTL) for oleic acid level were mapped to 14- and 10.6-cM marker intervals on two different LGs. Both loci together explained 32.2% of phenotypic variance. One major QTL explained 28.5% of the trait variance observed in this species.

Genomics and plant breeding

Much of our most basic understanding of genetics has its roots in plant genetics and crop breeding. The study of plants has led to important insights into highly conserved biological process and a wealth of knowledge about development. Agriculture is now well positioned to take its share benefit from genomics. The primary sequences of most plant genes will be determined over the next few years. Informatics and functional genomics will help identify those genes that can be best utilized to crop production and quality through genetic engineering and plant breeding. Recent developments in plant genomics are reviewed.

Linkage mapping of genes controlling resistance to white rust (Albugo candida) in Brassica rapa (syn. campestris) and comparative mapping to Brassica napus and Arabidopsis thaliana

Genes for resistance to white rust (Albugo candida) in oilseed Brassica rapa were mapped using a recombinant inbred (RI) population and a genetic linkage map consisting of 144 restriction fragment length polymorphism (RFLP) markers and 3 phenotypic markers. Young seedlings were evaluated by inoculating cotyledons with A. candida race 2 (AC2) and race 7 (AC7) and scoring the interaction phenotype (IP) on a 0-9 scale. The IP of each line was nearly identical for the two races and the population showed bimodal distributions, suggesting that a single major gene (or tightly linked genes) controlled resistance to the two races. The IP scores were converted to categorical resistant and susceptible scores, and these data were used to map a single Mendelian gene controlling resistance to both races on linkage group 4 where resistance to race 2 had been mapped previously. A quantitative trait loci (QTL) mapping approach using the IP scores detected the same major resistance locus for both races, plus a second minor QTL effect for AC2 on linkage group 2. These results indicate that either a dominant allele at a single locus (Acal) or two tightly linked loci control seedling resistance to both races of white rust in the biennial turnip rape cultivar Per. The map positions of white rust resistance genes in B. rapa and Brassica napus were compared and the results indicate where additional loci that have not been mapped may be located. Alignment of these maps to the physical map of the Arabidopsis genome identified regions to target for comparative fine mapping using this model organism.

A binary vector-based large insert library for Brassica napus and identification of clones linked to a fertility restorer locus for Ogura cytoplasmic male sterility (CMS)

We constructed and characterized a large DNA insert library for Brassica napus that would facilitate genome-related research and map-based cloning efforts in Brassica species. This library, consisting of 92 160 clones arrayed in 384-well microtiter dishes, was based on a conventional plant transformation vector (binary vector), and was constructed using a single ligation with transformation efficiency of over 5000 recombinants per microliter of ligation mixture. Every clone in this library contains an insert in the size range of 30-190 kb, facilitating both chromosome walking and plant transformation. Screening this library with three DNA markers (C2, F10, and CabR) that are linked to a fertility restorer locus for Ogura cytoplasmic male sterility (CMS) identified at least 17 positive clones for each probe. Among the 17 positive clones identified by C2, nine are linked to the restorer locus. Marker F10 identified 21 clones, of which only two are linked to the restorer locus. None of 68 clones identified by CabR is linked to the restorer locus. A stability test using two clones identified by the C2 marker indicated that large DNA inserts are stable in this conventional vector in both Escherichia coli and Agrobacterium. Key words: Brassica napus, binary vector, large DNA insert library, restorer gene.

Linkage analysis of molecular markers and quantitative trait loci in populations of inbred backcross lines of Brassica napus L

Backcross populations are often used to study quantitative trait loci (QTL) after they are initially discovered in balanced populations, such as F(2), BC(1), or recombinant inbreds. While the latter are more powerful for mapping marker loci, the former have the reduced background genetic variation necessary for more precise estimation of QTL effects. Many populations of inbred backcross lines (IBLs) have been developed in plant and animal systems to permit simultaneous study and dissection of quantitative genetic variation introgressed from one source to another. Such populations have a genetic structure that can be used for linkage estimation and discovery of QTL. In this study, four populations of IBLs of oilseed Brassica napus were developed and analyzed to map genomic regions from the donor parent (a winter-type cultivar) that affect agronomic traits in spring-type inbreds and hybrids. Restriction fragment length polymorphisms (RFLPs) identified among the IBLs were used to calculate two-point recombination fractions and LOD scores through grid searches. This information allowed the enrichment of a composite genetic map of B. napus with 72 new RFLP loci. The selfed and hybrid progenies of the IBLs were evaluated during two growing seasons for several agronomic traits. Both pedigree structure and map information were incorporated into the QTL analysis by using a regression approach. The number of QTL detected for each trait and the number of effective factors calculated by using biometrical methods were of similar magnitude. Populations of IBLs were shown to be valuable for both marker mapping and QTL analysis.