Plasmid deletion formation between short direct repeats in Bacillus subtilis is stimulated by single-stranded rolling-circle replication intermediates

A transposon system for random insertion of a gene expression cassette into the chromosome of Bacillus subtilis

Bacillus subtilis is a robust industrial workhorse for the production of heterologous proteins. Chromosomal integration-based protein production has advantages over plasmid-based methods. Considering that the expression level of a gene is affected by its location in the chromosome, it is important to find an optimal integration site for the gene to be expressed. This work establishes a method for random insertion of a gene expression cassette into chromosomes, enabling the screening of optimal integration sites for high-level protein production. Specifically, a gene expression cassette and a chloromycetin-resistance marker are assembled into a transposon. This transposon is inserted between the promoter and the ribosomal binding site of the zeocin-resistance marker in the chromosome, which blocks the transcription of the zeocin-resistance gene. Transposase Himar1-mediated transposition of this transposon activates the zeocin-resistance marker, which can be selected on plates containing both chloromycetin and zeocin. The transposition frequency was over 10^-5. This method was used to select proper insertion sites for the expression cassette of methyl parathion hydrolase (MPH). Compared with the common integration site amyE, the expression level of MPH was increased up to 50 % at the yjbH site.

Random Mutagenesis by Insertion of Error-Prone PCR Products to the Chromosome of Bacillus subtilis

Bacillus subtilis is an attractive host for the directed evolution of the enzymes whose substrates cannot be transported across cell membrane. However, the generation of a mutant library in B. subtilis suffers problems of small library size, plasmid instability, and heterozygosity. Here, a large library of random mutant was created by inserting error-prone PCR (epPCR) products to the chromosome of B. subtilis. Specifically, the epPCR product was fused with flanking regions and antibiotic resistant marker using a PCR-based multimerization method, generating insertion construct. The epPCR product was integrated into the chromosome via homologous recombination after the insertion construct was transformed into the supercompetent cells of B. subtilis strain SCK6. The transformation efficiency of the insertion construct was improved through co-expressing homologous recombination-promoting protein NgAgo, raising the number of competent cells, and increasing the length of flanking regions. A library containing 5.31 × 105 random mutants was constructed using per μg insertion construct, which is sufficient for directed evolution. The library generation process was accomplished within 1 day. The effectiveness of this method was confirmed by improving the activity of Methyl Parathion Hydrolase (MPH) toward chlorpyrifos and by enhancing the secretion level of MPH in B. subtilis. Taken together, the present work provides a fast and efficient method to integrate epPCR products into the chromosome of B. subtilis, facilitating directed evolution and expression optimization of target proteins.

Promoter engineering enables overproduction of foreign proteins from a single copy expression cassette in Bacillus subtilis

BACKGROUND

Bacillus subtilis is developed to be an attractive expression host to produce both secreted and cytoplasmic proteins owing to its prominent biological characteristics. Chromosomal integration is a stable expression strategy while the expression level is not ideal compared with plasmid expression. Thus, to meet the requirement of protein overexpression, promoter, as one of the key elements, is important. It is necessary to obtain an ideal promoter for overproduction of foreign proteins from a single copy expression cassette.

RESULTS

The activity of promoter P_ylb was further enhanced by optimizing the - 35, - 10 core region and upstream sequence (UP) by substituting both sequences with consensus sequences. The final engineered promoter exhibited almost 26-fold in β-galactosidase (BgaB) activity and 195-fold in super-folded green fluorescent protein (sfGFP) intensity than that of WT. The two proteins account for 43% and 30% of intracellular proteins, respectively. The promoter was eventually tested by successful extracellular overproduction of Methyl Parathion Hydrolase (MPH) and Chlorothalonil hydrolytic dehalogenase (Chd) to a level of 0.3 g/L (144 U/mL) and 0.27 g/L (4.4 U/mL) on shake-flask culture condition.

CONCLUSIONS

A strong promoter was engineered for efficient chromosomally integrated expression of heterologous proteins.

Development of a plasmid-based expression system in Clostridium thermocellum and its use to screen heterologous expression of bifunctional alcohol dehydrogenases (adhEs)

Clostridium thermocellum is a promising candidate for ethanol production from cellulosic biomass, but requires metabolic engineering to improve ethanol yield. A key gene in the ethanol production pathway is the bifunctional aldehyde and alcohol dehydrogenase, adhE. To explore the effects of overexpressing wild-type, mutant, and exogenous adhEs, we developed a new expression plasmid, pDGO144, that exhibited improved transformation efficiency and better gene expression than its predecessor, pDGO-66. This new expression plasmid will allow for many other metabolic engineering and basic research efforts in C. thermocellum. As proof of concept, we used this plasmid to express 12 different adhE genes (both wild type and mutant) from several organisms. Ethanol production varied between clones immediately after transformation, but tended to converge to a single value after several rounds of serial transfer. The previously described mutant C. thermocellum D494G adhE gave the best ethanol production, which is consistent with previously published results.

Engineering microbial hosts for production of bacterial natural products

Covering up to end 2015Microbial fermentation provides an attractive alternative to chemical synthesis for the production of structurally complex natural products. In most cases, however, production titers are low and need to be improved for compound characterization and/or commercial production. Owing to advances in functional genomics and genetic engineering technologies, microbial hosts can be engineered to overproduce a desired natural product, greatly accelerating the traditionally time-consuming strain improvement process. This review covers recent developments and challenges in the engineering of native and heterologous microbial hosts for the production of bacterial natural products, focusing on the genetic tools and strategies for strain improvement. Special emphasis is placed on bioactive secondary metabolites from actinomycetes. The considerations for the choice of host systems will also be discussed in this review.

Development of a CRISPR-Cas9 Tool Kit for Comprehensive Engineering of Bacillus subtilis

The establishment of a clustered regularly interspaced short palindromic repeat (CRISPR)-Cas9 system for strain construction in Bacillus subtilis is essential for its progression toward industrial utility. Here we outline the development of a CRISPR-Cas9 tool kit for comprehensive genetic engineering in B. subtilis In addition to site-specific mutation and gene insertion, our approach enables continuous genome editing and multiplexing and is extended to CRISPR interference (CRISPRi) for transcriptional modulation. Our tool kit employs chromosomal expression of Cas9 and chromosomal transcription of guide RNAs (gRNAs) using a gRNA transcription cassette and counterselectable gRNA delivery vectors. Our design obviates the need for multicopy plasmids, which can be unstable and impede cell viability. Efficiencies of up to 100% and 85% were obtained for single and double gene mutations, respectively. Also, a 2.9-kb hyaluronic acid (HA) biosynthetic operon was chromosomally inserted with an efficiency of 69%. Furthermore, repression of a heterologous reporter gene was achieved, demonstrating the versatility of the tool kit. The performance of our tool kit is comparable with those of systems developed for Escherichia coli and Saccharomyces cerevisiae, which rely on replicating vectors to implement CRISPR-Cas9 machinery.

IMPORTANCE

In this paper, as the first approach, we report implementation of the CRISPR-Cas9 system in Bacillus subtilis, which is recognized as a valuable host system for biomanufacturing. The study enables comprehensive engineering of B. subtilis strains with virtually any desired genotypes/phenotypes and biochemical properties for extensive industrial application.

Construction of a Food Grade Recombinant Bacillus subtilis Based on Replicative Plasmids with an Auxotrophic Marker for Biotransformation of d-Fructose to d-Allulose

A food grade recombinant Bacillus subtilis that produces d-psicose 3-epimerase (DPEase; EC 5.1.3.30) was constructed by transforming a replicative multicopy plasmid with a d-alanine racemase gene marker into B. subtilis 1A751 with the d-alanine racemase gene knocked out. The DPEase was expressed in B. subtilis without antibiotic resistance genes and without adding antibiotics during fermentation. Whole cells of the food grade recombinant B. subtilis were used to biotransform d-fructose to d-allulose. The two tandem promoters, including the HpaII and P43 promoters, increased expression levels compared to the use of one promoter, HpaII. For large-scale d-allulose production, the optimal enzyme dose was 40 enzyme activity units of dry cells per gram of d-fructose, which produced a 28.5% turnover yield in 60 min. The recombinant plasmid exhibited stability over 100 generations. This food grade recombinant B. subtilis may be used for large-scale d-allulose production in the food industry.

Human mitochondrial DNA replication

Elucidation of the process of DNA replication in mitochondria is in its infancy. For many years, maintenance of the mitochondrial genome was regarded as greatly simplified compared to the nucleus. Mammalian mitochondria were reported to lack all DNA repair systems, to eschew DNA recombination, and to possess but a single DNA polymerase, polymerase γ. Polγ was said to replicate mitochondrial DNA exclusively via one mechanism, involving only two priming events and a handful of proteins. In this "strand-displacement model," leading strand DNA synthesis begins at a specific site and advances approximately two-thirds of the way around the molecule before DNA synthesis is initiated on the "lagging" strand. Although the displaced strand was long-held to be coated with protein, RNA has more recently been proposed in its place. Furthermore, mitochondrial DNA molecules with all the features of products of conventional bidirectional replication have been documented, suggesting that the process and regulation of replication in mitochondria is complex, as befits a genome that is a core factor in human health and longevity.

The Mode of Replication Is a Major Factor in Segregational Plasmid Instability in Lactococcus lactis

The effects of the rolling-circle and theta modes of replication on the maintenance of recombinant plasmids in Lactococcus lactis were studied. Heterologous Escherichia coli or bacteriophage lambda DNA fragments of various sizes were inserted into vectors based on either the rolling-circle-type plasmid pWV01 or the theta-type plasmid pAMbeta1. All pAMbeta1 derivatives were stably maintained. pWV01 derivatives, however, showed size-dependent segregational instability, in particular when large DNA fragments were inserted. All recombinant pWV01 derivatives generated high-molecular-weight plasmid multimers (HMW) in amounts that were positively correlated with plasmid size and inversely correlated with the copy numbers of the monomeric plasmid forms. Formation of HMW or reductions in copy numbers were not observed with pAMbeta1 derivatives. The results indicate that HMW formation and/or reduction in plasmid copy numbers is an important factor in the maintenance of pWV01 derivatives. It is concluded that theta-type plasmids are superior to rolling-circle-type plasmids for cloning in lactococci.

Small rolling circle plasmids in Bacillus subtilis and related species: Organization, distribution, and their possible role in host physiology

Bacillus subtilis and related species (Bacillus licheniformis, Bacillus pumilus, Bacillus amyloliquefaciens, and Bacillus mojavensis) represent a group of bacteria largely studied and widely employed by industry. Small rolling circle replicating plasmids of this group of bacteria have been intensively studied as they represent a convenient model for genetic research and for the construction of molecular tools for the genetic modification of their hosts. Through the computational analysis of the available plasmid sequences to date, the first part of this review focuses on the main stages that the present model for rolling circle replication involves, citing the research data which helped to elucidate the mechanism by which these molecules replicate. Analysis of the distribution and phylogeny of the small RC plasmids inside the Bacillus genus is then considered, emphasizing the low level of diversity observed among these plasmids through the in silico analysis of their organization and the sequence divergence of their replication module. Finally, the parasitic vs. mutualistic nature of small rolling circle plasmids is briefly discussed.

Construction of a new high-copy number shuttle vector of Bacillus thuringiensis

AIMS

Construction and characterization of a new cloning shuttle vector for gene transfer and expression in Bacillus thuringiensis.

METHODS AND RESULTS

A novel short and high-copy number shuttle vector called pHBLBIV, was constructed for gene transfer and expression in Bacillus thuringiensis. A 1.6-kbp replicon of a relatively high-copy number endogenous plasmid of a selected B. thuringiensis strain was ligated to Escherichia coli pUC18 replicon containing the ampicillin and the erythromycin resistance genes used for the selection of respectively E. coli and B. thuringiensis transformants. The constructed vector was shown to have a high copy number compared with the conventional B. thuringiensis vectors, and used successfully for the transfer of vegetative insecticidal protein-encoding gene (vip) in between B. thuringiensis strains.

CONCLUSIONS

A new shuttle vector of B. thuringiensis-E. coli named pHBLBIV was constructed. It was characterized by its high copy number, small size and segregational stability. This vector was successfully used for vip gene cloning and transfer in B. thuringiensis.

SIGNIFICANCE AND IMPACT OF THE STUDY

A novel shuttle vector has been constructed, which has demonstrated potential for the cloning and expression of genes in B. thuringiensis.

Construction of plasmid-based expression vectors for Bacillus subtilis exhibiting full structural stability

A series of plasmid-based expression vectors have been constructed allowing stable intracellular expression of recombinant proteins in Bacillus subtilis strains. These expression vectors are based on the recently described Escherichia coli-B. subtilis shuttle vector pMTLBS72 which replicates as theta circles. Besides the weak constitutive promoter P(lepA), we inserted three different controllable promoters: P(gsiB) which can be induced by heat and acid shock, and by ethanol, P(xylA) and P(spac) which respond to the addition of xylose and IPTG, respectively. The versatility of these expression vectors was demonstrated by fusing their promoters to a reporter gene and by overexpression of the HtpG protein with three of them. All recombinant vectors exhibited full structural stability.

Two-triplet CGA repeats impede DNA replication in bacteriophage M13 in Escherichia coli

Expansion and contraction instabilities associated with CAG, CGG, GAA and CGA (GAC) repeats propagation cause more than a dozen human genetic diseases and cancers. In this work, the propagation behavior of a bacteriophage M13 carrying a calf prochymosin cDNA fragment with a (CGA)2 repeat in a small hairpin forming region is reported. Such a M13 derivative when propagated in Escherichia coli, produces small plaques by decreasing phage yield and also mitigates the inhibition on host cell growth, compared to those control bacteriophages either containing a "CTGCTA" sequence or wildtype, suggesting that CGA2 repeat impedes DNA replication in vivo. Moreover, an increased internal free energy is found associated with (CGA)2 sequence compared to those "CTGCTA" and wildtype, which ruled out a possibility of CGA2 repeat effects on propagation is through influencing the hairpin structure formation.

Effect of the replication mode of a plasmid on the stability of multimeric endoxylanase genes in Bacillus subtilis

Effect of the replication mode of a plasmid on the stability of tandemly multimerized endoxylanase genes and a gene dose-dependent expression of the endoxylanase were studied in Bacillus subtilis. The structural genes encoding an endoxylanase, carrying its original promoter and ribosomal binding sequence, were tandemly multimerized and cloned into the Escherichia coli-B. subtilis shuttle plasmid, pJH27 delta 88 or pMTL500e, which has a rolling circle-replicon or a theta (theta)-replicon in B. subtilis, respectively. The cloned dimers in pJH27 delta 88, which has a rolling circle-replicon, spontaneously rearranged to monomers in B. subtilis DB104, whereas those in pMTL500e, having a theta (theta)-replicon, were stably maintained. Expression level of the endoxylanase was proportional to the gene dosage in multimers. The endoxylanase activity in the supernatant increased from 80 U ml-1 with pMTL-1x containing a monomer of the gene to 165 U ml-1 with pMTL-4x containing a tetramer. These results indicate that high level expression of the endoxylanase gene can be obtained by tandemly multimerizing the genes in a plasmid with a theta (theta)-replicon.

Rolling-circle plasmids from Bacillus subtilis: complete nucleotide sequences and analyses of genes of pTA1015, pTA1040, pTA1050 and pTA1060, and comparisons with related plasmids from gram-positive bacteria

Most small plasmids of Gram-positive bacteria use the rolling-circle mechanism of replication and several of these have been studied in considerable detail at the DNA level and for the function of their genes. Although most of the common laboratory Bacillus subtilis 168 strains do not contain plasmids, several industrial strains and natural soil isolates do contain rolling-circle replicating (RCR) plasmids. So far, knowledge about these plasmids was mainly limited to: (i) a classification into seven groups, based on size and restriction patterns; and (ii) DNA sequences of the replication region of a limited number of them. To increase the knowledge, also with respect to other functions specified by these plasmids, we have determined the complete DNA sequence of four plasmids, representing different groups, and performed computer-assisted and experimental analyses on the possible function of their genes. The plasmids analyzed are pTA1015 (5.8 kbp), pTA1040 (7.8 kbp), pTA1050 (8.4 kbp), and pTA1060 (8.7 kbp). These plasmids have a structural organization similar to most other known RCR plasmids. They contain highly related replication functions, both for leading and lagging strand synthesis. pTA1015 and pTA1060 contain a mobilization gene enabling their conjugative transfer. Strikingly, in addition to the conserved replication modules, these plasmids contain unique module(s) with genes which are not present on known RCR plasmids of other Gram-positive bacteria. Examples are genes encoding a type I signal peptidase and genes encoding proteins belonging to the family of response regulator aspartate phosphatases. The latter are likely to be involved in the regulation of post-exponential phase processes. The presence of these modules on plasmids may reflect an adaptation to the special conditions to which the host cells were exposed.

Role of enzymes of homologous recombination in illegitimate plasmid recombination in Bacillus subtilis

The structural stability of plasmid pGP1, which encodes a fusion between the penicillinase gene (penP) of Bacillus licheniformis and the Escherichia coli lacZ gene, was investigated in Bacillus subtilis strains expressing mutated subunits of the ATP-dependent nuclease, AddAB, and strains lacking the major recombination enzyme, RecA. Strains carrying a mutation in the ATP-binding site of the AddB subunit exhibited high levels of plasmid instability, whereas a comparable mutation in the A subunit did not affect plasmid stability. Using an alternative plasmid system, pGP100, we were able to demonstrate that the differences in stability reflected differences in initial recombination frequencies. Based on a comparison of endpoint sequences observed in the various hosts, we speculate that at least two different mechanisms underlie the deletion events involved, the first (type I) occurring between nonrepeated sequences, and the second (type II) occurring between short direct repeats (DRs). The latter event was independent of single-strand replication intermediates and the mode of replication and possibly requires the introduction of double-strand breaks (DSBs) between the repeats. In the absence of functional AddAB complex, or the AddB subunit, DSBs are likely to be processed via a recA-independent mechanism, resulting in intramolecular recombination between the DRs. In wild-type cells, such DSBs are supposed to be either repaired by a mechanism involving AddAB-dependent recombination or degraded by the AddAB-associated exonuclease activity. Plasmid stability assays in a recA mutant showed that (i) the level of deletion formation was considerably higher in this host and (ii) that deletions between short DRs occurred at higher frequencies than those described previously for the parental strain. We propose that in wild-type cells, the recA gene product is involved in recombinational repair of DSBs.

The expression of a plasmid-specified exported protein causes structural plasmid instability in Bacillus subtilis

The rolling-circle plasmid pGP1 was used to study the effects of the expression of a plasmid-specified exported protein on structural plasmid stability in Bacillus subtilis. pGP1 contains a fusion between the Bacillus licheniformis penP gene, encoding a C-terminally truncated penicillinase, and the Escherichia coli beta-galactosidase (lacZ) gene. Two processes affected the accumulation of pGP1 variants with deletions in the penP-lacZ region. First, divergent transcription from genes upstream of penP-lacZ increased pGP1 deletion frequencies up to about 10-fold. Second, the removal of the PenP signal peptide resulted in completely stable plasmids, indicating that the entry of the PenP fragment into the protein export pathway is an important factor in the instability of pGP1. On the basis of these results, we propose a model in which the temporary anchoring of the plasmid to the membrane through the cotranscriptional and cotranslational entry of PenP into the protein export pathway creates domains of local hypersupercoiling, which we assume to be targets for deletion formation.

Identification of interdomain sequences promoting the intronless evolution of a bacterial protein family

In the evolution of eukaryotic genes, introns are believed to have played a major role in increasing the probability of favorable duplication events, chance recombinations, and exon shuffling resulting in functional hybrid proteins. As a rule, prokaryotic genes lack introns, and the examples of prokaryotic introns described do not seem to have contributed to gene evolution by exon shuffling. Still, certain protein families in modern bacteria evolve rapidly by recombination of genes, duplication of functional domains, and as shown for protein PAB of the anaerobic bacterial species Peptostreptococcus magnus, by the shuffling of an albumin-binding protein module from group C and G streptococci. Characterization of a protein PAB-related gene in a P. magnus strain with less albumin-binding activity revealed that the shuffled module was missing. Based on this fact and observations made when comparing gene sequences of this family of bacterial surface proteins interacting with albumin and/or immunoglobulin, a model is presented that can explain how this rapid intronless evolution takes place. A new kind of genetic element is introduced: the recer sequence promoting interdomain, in frame recombination and acting as a structure-less flexibility-promoting spacer in the corresponding protein. The data presented also suggest that antibiotics could represent the selective pressure behind the shuffling of protein modules in P. magnus, a member of the indigenous bacterial flora.

Overproduction of the ATP-dependent nuclease AddAB improves the structural stability of a model plasmid system in Bacillus subtilis

The effect of the ATP-dependent exonuclease AddAB complex on the structural stability of plasmid pGP1 in Bacillus subtilis was studied. Using deletion mutagenesis and gene amplification techniques, B. subtilis strains were constructed either lacking or overproducing the AddAB complex, a key enzyme in homologous recombination. The deletion mutant possessed no residual ATP-dependent nuclease activity; in contrast, the nuclease activity was up to 30 times higher in lysates of strains carrying multiple copies of the addAB genes in the chromosome. Southern blot analyses of these strains indicated that a linear relationship exists between the number of chromosomal gene copies and the level of AddAB activity. The structural stability of pGP1 was analyzed in the AddAB-deficient and over-producing backgrounds. Frequencies of deletion formation in the plasmid, as monitored by the expression of the pGP1-encoded penP-lacZ fusion on media containing X-gal, were shown to be increased at least 25-fold in the addAB knock-out mutant, whereas the stability of pGP1 was improved up to 15-fold in strains overproducing the AddAB enzyme. A possible explanation for these findings is that interactions between AddAB and plasmid molecules prevent the formation of secondary structures that constitute potential deletion target sites, and thereby enhance the structural stability of plasmids.

Characterization of the replication region of the Bacillus subtilis plasmid pLS20: a novel type of replicon

A 3.1 kb fragment of the large (approximately 55 kb) Bacillus subtilis plasmid pLS20 containing all the information for autonomous replication was cloned and sequenced. In contrast to the parental plasmid, derived minireplicons were unstably maintained. Using deletion analysis the fragment essential and sufficient for replication was delineated to 1.1 kb. This 1.1 kb fragment is located between two divergently transcribed genes, denoted orfA and orfB, neither of which is required for replication. orfA shows homology to the B.subtilis chromosomal genes rapA (spoOL, gsiA) and rapB (spoOP). The 1.1 kb fragment, which is characterized by the presence of several regions of dyad symmetry, contains no open reading frames of more than 85 codons and shows no similarity with other known plasmid replicons. The structural organization of the pLS20 minimal replicon is entirely different from that of typical rolling circle plasmids from Gram-positive bacteria. The pLS20 minireplicons replicate in polA5 and recA4 B.subtilis strains. Taken together, these results strongly suggest that pLS20 belongs to a new class of theta replicons.

Template-switching during DNA synthesis by Thermus aquaticus DNA polymerase I

Recombinant DNA molecules are often generated during the polymerase chain reaction (PCR) when partially homologous templates are available [e.g., see Pääbo et al. (1990) J. Biol. Chem. 265, 4718-4721]. It has been suggested that these recombinant molecules are a consequence of truncated extension products annealing to partially homologous templates on subsequent PCR cycles. However, we demonstrate here that recombinants can be generated during a single round of primer extension in the absence of subsequent heat denaturation, indicating that template-switching produces some of these recombinant molecules. Two types of template-switches were observed: (i) switches to pre-existing templates and (ii) switches to the complementary nascent strand. Recombination is reduced several fold when the complementary template strands are physically separated by attachment to streptavidin magnetic beads. This result supports the hypothesis that either the polymerase or at least one of the two extending strands switches templates during DNA synthesis and that interaction between the complementary template strands is necessary for efficient template-switching.

Characterization of single strand origins of cryptic rolling-circle plasmids from Bacillus subtilis

In this paper we describe the isolation and characterization of single strand origins (SSOs) of several cryptic Bacillus subtilis plasmids which use the rolling-circle mechanism of replication. The plasmids used in this study involved pTA1015, pTA1020, pTA1030, pTA1040, pTA1050 and pTA1060. The SSO of pTA1015 was isolated by shotgun cloning in a specially designed vector, pWM100, which has no SSO of its own. Sequence analysis revealed that the SSO of pTA1015 is almost identical to formerly described palT type SSOs. Also pTA1020 and pTA1060 were shown to contain SSOs highly homologous to palT. Using Southern hybridization with the palT of pTA1015 as a probe, the SSO of pTA1040 was cloned. Sequence analysis revealed a region of 200 bp which is 77% identical to the palT of pTA1015. The plasmids pTA1030 and pTA1050 contain an SSO which is highly homologous to the SSO of pTA1040. The majority of the SSOs of rolling-circle plasmids from B.subtilis seem to belong to two related families which we denote as palT1 (present on pTA1015, pTA1020 and pTA1060) and palT2 (present on pTA1030, pTA1040 and pTA1050). Both families of SSOs are highly efficient single-strand-conversion signals in B.subtilis.

Frequency of deletion formation decreases exponentially with distance between short direct repeats

The effect of distance between 18 bp direct repeats on deletion formation has been examined in Bacillus subtilis. The deletion frequency decreased exponentially by more than 1000-fold as the distance increased from 33 to 2313 bp. This decrease occurred in two distinct phases, which may be determined by DNA-duplex flexibility. A similar relationship between deletion formation and distance was observed in a theta-replicating plasmid and in the chromosome, indicating that this relationship might have a general validity.

A cytotoxic early gene of Bacillus subtilis bacteriophage SPO1

Some of the early genes of Bacillus subtilis bacteriophage SPO1 were hypothesized to function in the shutoff of host biosyntheses. Two of these genes, e3 and e22, were cloned and sequenced. E22 showed no similarity to any known protein, while E3, a highly acidic protein, showed significant similarity only to other similarly acidic proteins. Each gene was immediately downstream of a very active early promoter. Each was expressed actively during the first few minutes of infection and was then rapidly shut off and its RNA rapidly degraded. An e3 nonsense mutation severely retarded the degradation of e3 RNA. Expression of a plasmid-borne e3 gene, in either B. subtilis or Escherichia coli, resulted in the inhibition of host DNA, RNA, and protein syntheses and prevented colony formation. However, the e3 nonsense mutation caused no measurable decrease in either burst size or host shutoff during infection and, in fact, caused an increased burst size at high multiplicities of infection. We suggest that e3 is one of several genes involved in host shutoff, that its function is dispensable both for host shutoff and for phage multiplication, and that its shutoff function is not entirely specific to host activities.

Mode and origin of replication of pSAM2, a conjugative integrating element of Streptomyces ambofaciens

pSAM2 is an 11 kb integrating element from Streptomyces ambofaciens that is capable of replication. It generates single-stranded DNA during replication, and is therefore the first Streptomyces integrating element to be described that may belong to the family of elements, called the ssDNA elements, that replicate by a rolling-circle mechanism. The direction of replication has been identified. The plus origin (ori) of replication and minus origin (M-O) have been located. Streptomyces lividans harbouring replicating pSAM2 also contain numerous small covalently closed circular DNA molecules (scm) derived from pSAM2. These scm contain ori and extend on both sides of the putative nick site. Sequences at the junction points of these scm are heterogeneous but short direct repeats were always found in the vicinity of these junctions.

Efficient plasmid mobilization by pIP501 in Lactococcus lactis subsp. lactis

pIP501 is a streptococcal conjugative plasmid which can be transmitted among numerous gram-positive strains. To identify a minimal mobilization (mob) locus of pIP501, DNA fragments of pIP501 were cloned into nonconjugative target plasmids and tested for mobilization by pIP501. We show that nonmobilizable plasmids containing a specific fragment of pIP501 are transmitted at high frequencies between Lactococcus lactis subsp. lactis strains if transfer (tra) functions are provided in trans by a pIP501 derivative. Independent transfer of the mobilized plasmid was observed in up to 44% of transconjugants. A 2.2-kb segment containing mob was sequenced. This DNA segment is characterized by three palindromes (palI, palII, and palIII) and a 202-amino-acid open reading frame (ORFX) of unknown function. The smallest DNA fragment conferring high frequency mobilization was localized to a 1.0-kb region (extending from pIP501 coordinates 3.60 to 4.60 on the 30.2-kb map) which contains palI (delta G = -27 kcal/mol [ca. -110,000 J/mol]). A 26-bp sequence identical to palI is present on pIP501, upstream of the plasmid copy control region. Further homologies with the palI sequence are also found with the related Enterococcus faecalis conjugative plasmid pAM beta 1. The region containing mob maps outside the previously described segment mediating pIP501 conjugation. Our results with recA strains indicate that the mob site is a hot spot for cointegrate formation.

Repeats in an extracellular protein of weakly pathogenic strains of Streptococcus suis type 2 are absent in pathogenic strains

Streptococcus suis type 2 strains that are pathogenic for pigs produce a 110-kDa extracellular protein factor (EF). Nonpathogenic and weakly pathogenic strains do not produce EF or produce a protein (EF*) that is immunologically related to EF. To study the pathogenesis of S. suis type 2 in pigs and to develop tools and methods for the control of S. suis type 2 infections, we cloned and characterized the genes encoding EF and various EF* proteins. Analysis of the deduced amino acid sequences showed that the first 833 amino acids at the N terminus of the EF and EF* proteins were nearly identical. The proteins differed, however, at their C termini. Unlike the 110-kDa EF protein, the EF* proteins contained several repeated units of 76 amino acids. The number and arrangement of the repeats in the EF* proteins varied. The data suggest that the gene encoding EF could have evolved from an epf* gene by a specific deletion event. The lack of repeated amino acid units in the EF protein may be related to virulence.

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19

pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 bp direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 bp direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pTB19 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.

Construction of cloning vectors for Bacillus thuringiensis

The replication region of the Bacillus thuringiensis plasmid, pHT1030, was treated with hydroxylamine. Various copy-number mutants were selected and subsequently used to construct shuttle vectors with multiple cloning sites. These recombinant plasmids are very stable and allowed the cloning of a delta-endotoxin-encoding gene in B. thuringiensis. Comparison between gene expression level and vector copy-number indicated that a plateau in delta-endotoxin production is reached with a copy-number of about fifteen per equivalent chromosome.

Nucleotide sequence and characterization of the broad-host-range lactococcal plasmid pWVO1

The nucleotide sequence of the Lactococcus lactis broad-host-range plasmid pWVO1, replicating in both gram-positive and gram-negative bacteria, was determined. This analysis revealed four open reading frames (ORFs). ORF A appeared to encode a trans-acting 26.8-kDa protein (RepA), necessary for replication. The ORF C product was assumed to play a regulatory role in replication. Both RepA and the ORF C product showed substantial sequence similarity with the Rep proteins of the streptococcal plasmid pLS1. In addition, the plus origin of replication was identified on the basis of strong similarity with the plus origin of pLS1. Derivatives of pWVO1 produced single-stranded (ss) DNA in Bacillus subtilis and L. lactis, suggesting that this plasmid uses the rolling-circle mode of replication. In B. subtilis, but not in L. lactis, the addition of rifampicin resulted in increased levels of ssDNA, indicating that in the former organism the host-encoded RNA polymerase is involved in the conversion of the ssDNA to double-stranded plasmid DNA (dsDNA). Apparently, in L. lactis the conversion of ss to ds pWVO1 DNA occurs by a mechanism which does not require the host RNA polymerase.