Comparison of single cell culture derived Solanum tuberosum L. plants and a model for their application in breeding programs

Artificial Meat Industry: Production Methodology, Challenges, and Future

Biotechnology and food science have pioneered the notion of cultured meat. Conventional meat production face issues related to butchering, dietary inadequacy, foodborne disease, and the emanation of methane, which cultured meat evades while promising the texture and feel of real meat. Mass production techniques for plant-based meat analogs have been developed, whose products have hit the market. In vitro production on scaffolding and self-organizing techniques have manufactured small-scale meat products offering tunable nutrition, although more specialized contrivances are needed to build a cultured meat framework on a large scale. Prospective techniques like 3D/4D bio-printing, biophotonics, and cloning are current research subjects. Cultured meat needs to overcome societal and regulatory hurdles prior to commercialization, and, in any event, is a long-term necessity for humankind, although the high production cost and affirmation among people is the principal impediment.

Anther Culture of Potato: Method and Applications

Anther culture provides a tool to produce haploid lines from cultivated potato (Solanum tuberosum L.), which has a tetraploid (2n = 4x = 48) genome constitution. Shoot regeneration via direct embryogenesis in anther culture procedure is preferred to produce dihaploid (2n = 2x = 24) potato lines, which can be applied in breeding of potato varieties. The anther culture protocol described in the present chapter can be conducted not only in cultivated potato (S. tuberosum) but also in other genetically related potato species.

Precision breeding for novel starch variants in potato

Potato can be used as a source of modified starches for culinary and industrial processes, but its allelic diversity and tetraploid genome make the identification of novel alleles a challenge, and breeding such alleles into elite lines is a slow and difficult process. An efficient and reliable strategy has been developed for the rapid introduction and identification of new alleles in elite potato breeding lines, based on the ethylmethanesulphonate mutagenesis of dihaploid seeds. Using the granule-bound starch synthase I gene (waxy) as a model, a series of point mutations that potentially affect gene expression or enzyme function was identified. The most promising loss-of-function allele (waxy(E1100)) carried a mutation in the 5'-splice donor site of intron 1 that caused mis-splicing and protein truncation. This was used to establish elite breeding lineages lacking granule-bound starch synthase I protein activity and producing high-amylopectin starch. This is the first report of rapid and efficient mutation analysis in potato, a genetically complex and vegetatively propagated crop.

Retrotransposon-based markers from potato monoploids used in somatic hybridization

In an attempt to remove lethal and deleterious genes and enhance the heterozygosity of the potato genome, we developed several diverse somatic hybrids through the electrofusion of selected monoploids. Somatic hybrids and somaclones resulting from fused and unfused protoplasts, respectively, were verified with microsatellites. Molecular markers anchored in the Tst1 retrotransposon were used to examine polymorphisms in the regenerated plants and to reveal any somaclonal variation. Inter-retrotransposon amplified polymorphism (IRAP) and retrotransposon display (sequence-specific amplified polymorphism (S-SAP), anchored in a retransposon) were examined on an ALFexpress DNA sequencer. Because of inconsistencies in the number and quality of bands revealed by the combination of either class of marker in combination with the ALFexpress, we cloned and sequenced 11 S-SAP bands to use as restriction fragment length polymorphism (RFLP) probes in Southern blot analyses of genetic relationships in our potato populations and among related Solanaceae. Readily scorable bands (n = 27) that separated somatic hybrids from parental monoploids and somaclones and grouped monoploids according to known genetic relationships were produced. Some of the probes could be used to differentiate tomato and Datura from potato. Sequence analysis of 5 cloned IRAP and 11 cloned S-SAP markers confirmed that they were anchored in the Tst1 retrotransposon. BLAST searches within GenBank produced 10 highly significant hits (5 nucleotide, 4 expressed sequence tag (EST), and 1 protein) within closely related Solanaceae, suggesting that Tst1 represents an old retroelement that was inserted before the diversion of genera within Solanaceae; however, most sequences were undescribed.

Tetraploid somatic hybrids of potato (Solanum tuberosum L.) obtained from diploid breeding lines

Intraspecific somatic hybrids between 16 different diploid breeding lines of Solanum tuberosum L. were produced by PEG-induced fusion. Manually selected heterokaryons were cultured in a Millicells-CM using a post-fusion protoplast mixture. Plants were regenerated from calli derived from heterokaryons obtained from 10 out of 38 combinations of diploid lines. Of the tested putative somatic hybrids, 14.2% were diploid, 72.8% were tetraploid and 13% pentaploid. The DNA amplification pattern obtained with RAPD or semi-random primers confirmed that 6 fusion combinations were hybrids. In most cases, the morphological traits were intermediate to those of the diploid fusion partners. About 23.0% of the tested somatic hybrids showed variation in their morphology. Of the tested somatic hybrids, 78.0% flowered and 86.0% tuberized. The cytoplasm of 9 diploid lines and 6 somatic hybrid combinations was analysed. Two of the diploid lines had W/S chloroplasts and α or ε mitochondria; the remainder contained T chloroplasts and β mitochondria. All the analysed somatic hybrids carried T chloroplasts and β mitochondria.

Toward the development of highly homozygous diploid potato lines using the self-compatibility controllingSligene

Cultivated diploid potatoes (2n = 2x = 24) are self-incompatible, but can be altered to become self-compatible using the Sli gene. Previously, a diploid clone 97H32–6 was selfed up to S3using the Sli gene. To explore the usefulness of the Sli gene for the production of highly homozygous diploid potatoes, 2 S4families from the above 97H32-6 derived S3lines (inbred series A) and 3 S5families by continuous selfings from a different F1(= S0) plant (inbred series B) were developed. The level of heterozygosity and the location of heterozygous loci on the genetic map were investigated using RFLP and AFLP markers. The average heterozygosity levels of the originally heterozygous loci decreased from 100% in S0to 10.7% in S4and 8.6% in S5(inbred series A and B, respectively). The average rate of reduction in heterozygosity per generation (38.4% and 38.5% for inbred series A and B, respectively) was lower than the theoretically expected rate (50%). However, none of the loci or chromosome sections was exclusively heterozygous in the advanced self-progeny. Thus, highly homozygous and seed-propagated diploid potatoes could be obtained by repeated selfing using the Sli gene.Key words: Selfing, heterozygosity, diploid potato, Sli gene, Solanum.

Distribution of novel and known repeated elements of Solanum and application for the identification of somatic hybrids among Solanum species

Species-specific repetitive DNA probes are a useful tool for the molecular identification of somatic hybrids. Therefore, the distribution of three repetitive DNA elements of Solanum was investigated in Solanum wild species, Solanum breeding lines, and in more distantly related species of the genera Lycopersicon, Nicotiana, and Datura. The clone pSCH15, obtained from S. circaeifolium, represents a new 168-bp repetitive element; it shows 73-79% sequence similarity to repetitive elements of S. brevidens and Lycopersicon species. The 163-bp element in pSBH6, cloned from S. bulbocastanum, turned out to be very similar (95% sequence homology) to the Lycopersicon element pLEG15/TGRI previously regarded to be present only in species of the genus Lycopersicon and in S. lycopersicoides. Lower sequence similarity of approximately 80% was observed to repetitive elements of S. brevidens which are organized differently. The repeats exhibited different degrees of specificity: by Southern hybridization the element represented by the clone pSBH6 could be detected in almost all Solanum species investigated here but only after long exposure to X-ray film. The previously described "Solanum-specific" element represented by the clone pSA287 was also found, although in a very low copy number, in Lycopersicon esculentum. Therefore, detection of the repetitive elements pSA287 and pSBH6 in those species in which the respective repeat is less represented depends on exposure time. In contrast, the element pSCH15 is prominently present only in a small number of Solanum wild species and - to some extent - in the diploid breeding lines as revealed after long exposure. Use of these repeated elements for the identification of specific genomes in protoplast-fusion hybrids between Solanum wild species and Solanum breeding lines, or between two breeding lines, was evaluated.

Analysis of the genetic composition of anther-derived potato by randomly amplified polymorphic DNA and simple sequence repeats

Randomly amplified polymorphic DNA (RAPD) and simple sequence repeat (SSR) analyses were used to characterize the genetic composition of anther-derived plants of a diploid potato clone, CP2 (Solanum chacoense 80-1 x S. phureja 1-3). The ploidy of anther-derived plants was first determined by flow cytometry. A total of 44 decamer primers was screened for RAPD polymorphism. The loci that segregated were selected and scored. The monoploids had less than half as many loci carrying RAPD markers compared with the anther donor. Among 14 anther-derived diploids, 5 were identified as homozygous by marker frequency similar to monoploids and 9 as heterozygous. Five of seven SSRs obtained from published potato sequences were polymorphic in CP2. CP2 was found to be heterozygous with two alleles at four SSR loci (TC/TA, AAG, AGA, CTT) and three alleles at a ACTC locus. Primer pairs flanking each of the five polymorphic SSRs revealed that monoploids had only the allele contributed by S. chacoense 80-1. Homozygous diploids had only one band per SSR locus, whereas heterozygous diploids displayed more than one allele for at least one SSR locus. Results of the SSR analysis supported the findings based on RAPD markers; the same five diploid clones were characterized as homozygous by both SSR and RAPD markers.

Evidence for somatic translocation during potato dihaploid induction

Potato dihaploid PDH55 (Solanum tuberosum) is exclusively euploid (2n = 24) but apparently contains and expresses DNA from dihaploid inducer IVP48 (S. phureja). Genomic in situ hybridization (GISH) suggested IVP48 DNA incorporated stably into PDH55 by somatic translocation. This finding has two important implications. Firstly, the long-held implicit assumption that euploid dihaploids produced by dihaploid inducers are pure S. tuberosum seems incorrect. This may complicate meiotic, genetical and molecular studies involving potato dihaploids. Secondly, if such translocations are not rare, the phenomenon may offer a novel way to introduce useful traits directly from wild dihaploid-inducing species into S. tuberosum.

Interaction between cytoplasmic composition and yield parameters in somatic hybrids of S. tuberosum L

The nuclear and cytoplasmic composition of five different fusion combinations, consisting of up to 50 hybrid regenerants each, was characterized by RFLP analysis. Simultaneously, the hybrid clones of four fusion combinations were evaluated in field experiments for yield and starch content.Predominantly complete chloroplast segregation was found with a 1∶1 ratio, in all but one fusion combination. Mitochondria, in contrast revealed up to 75% recombination, as proven by the partial addition of parental banding patterns and the altered assignment of the same genotypes with different probes. Newly occuring DNA bands were also indicative of rearrangements in the mitochondrial genome. Correlations between RFLP data and field parameters were calculated. Deviating RFLP patterns of the nuclear genome did not influence yield parameters. Also the assignment of hybrids to different chloroplast genotypes did not affect yield or starch content. However, mitochondrial types could be distinguished with respect to starch content and tuber yield. The more thorough analysis of mitochondrial composition, with different probes homologous to coding regions, revealed a relationship between the homogeneity of the mt genome and the yield level.

A Lactuca universal hybridizer, and its use in creation of fertile interspecific somatic hybrids

A Lactuca sativa cv. Ardente line heterozygous for a gene encoding resistance to kanamycin, a positive and dominant trait, was crossed with cv. Girelle, which is heterozygous for a recessive albinism marker. The resulting seeds yielded 25% albino seedlings, of which 50% were also resistant to kanamycin. Such plantlets (KR, a) grown in vitro were used for preparation of universal hybridizer protoplasts, since green buds that can develop on kanamycin containing-medium should result from fusion with any wild-type protoplast. To test the practicability of this selection scheme, we fused L. sativa KR, a protoplasts with protoplasts derived from various wild Lactuca as well as various other related species. Protoplast-derived cell colonies were selected for resistance to kanamycin at the regeneration stage. Green buds were regenerated after fusion with protoplasts of L. tatarica and of L. perennis. So far, 9 interspecific hybrid plants have been characterized morphologically. In addition, random amplified polymorphic DNA (RAPD) analysis with selected primers confirmed that these plants are indeed interspecific hybrids. Some plants are female-fertile and production of backcross progenies with L. sativa is in progress. Since many desirable traits such as resistances to viruses, bacteria and fungi (Bremia lactucae) have been characterized in wild Lactuca species, the use of somatic hybridization in breeding programmes now appears a practical possibility.

Field evaluation of tetraploid somatic potato hybrids

Tetraploid somatic hybrids, derived from ten different fusion combinations, were grown in the field to study the inheritance of quantitatively-controlled agronomic traits. The data from two seasons showed that the heterosis in yield varied between 70% and 230% compared to the mid-parent value of the dihaploid fusion clones. The relative yield of the hybrids compared to two standard varieties (= 100%) ranged from 47% to 106%. Despite large differences in yield between the single hybrids of the same fusion combination, no significant differences could be detected between the hybrids. The analysis of the yield components revealed that the heterosis was mainly due to a highly increased tuber weight, whereas the tuber number was in general intermediate to that of the parent clones. In three combinations, the starch content of the hybrids was 15-20% higher than the midparent value and in the others it was intermediate. Fusion of clones with long oval tubers and with round or round-oval ones showed the round/round-oval form was dominant. Fusion combinations of tuber flesh colour indicated that in most cases yellow was dominant to white, while red skin colour was dominant over yellow.

Somatic fusion for combining virus resistances in Solanum tuberosum L

Dihaploid genotypes of potato, containing the dominant allele for extreme resistance to PVX and/or PVY, were used in a fusion program in order to analyze the behaviour of the two monogenetic resistances after fusion. Eighteen different fusion combinations were performed and regenerated hybrids were tested by ELISA for their virus resistance. In most of the combinations an addition of the two qualities was found, but a few deviating clones were observed. The possible reasons for the phenotypic disappearance of resistant alleles are discussed.

Isolation and characterization of potato diploid clones generating a high frequency of monohaploid or homozygous diploid androgenetic plants

Cultured microspores of diploid potato clones lead with high frequency to diploid regenerants. In this paper we report on the genetic variability for in-vitro monohaploid production from anthers of diploid plants. Three diploid genotypes have been isolated which combine the capacity to regenerate monohaploid plants with outstanding embryoid production. A trait of the anther-donor clones associated with the generation of monohaploid plants is the low production of 2n pollen grains. When present in anthers of diploid genotypes, diploid unreduced microspores are, in fact, derived mainly from a first division restitution mechanism leading to high heterozygosity of the derived embryoids, a state which apparently supports superior growth in-vitro. Also, reduced microspores have been found capable of generating diploid regenerants and the adoption of the RFLP technique allowed the isolation of such diploid plants, which can be considered to be pure lines. Donor clones with a low capacity to generate monohaploids are, as expected, poor producers of homozygous diploid plants. The selection of an anther donor producing a sufficient number of monohaploid or homozygous diploid regenerants fulfills the requirements of the first part of the analytical breeding scheme, i.e., the production of homozygous diploid clones.

A cytogenetic and phenotypic characterization of somatic hybrid plants obtained after fusion of two different dihaploid clones of potato (Solatium tuberosum L.)

Somatic hybrid plants of various ploidy levels obtained after chemical fusion between two dihaploid clones of potato Solanum tuberosum L. have been analysed by cytological, morphological and molecular methods. The hybrid nature of tetraploid and hexaploid plants and the genome dosage in hexaploid hybrids were confirmed by Giemsa C-banding. Tetraploid and hexaploid hybrids showed numerical as well as structural chromosome mutations. The latter occurred mainly in the nuclear organizing chromosome. The tetraploid hybrids were more vigorous than the dihaploid parents as demonstrated by an increase in height, enlargement of leaves, increase in the number of internodes, restored potential for flowering and increased tuber yield. The grouping of tetraploid somatic hybrids into various classes on the basis of leaf morphology revealed that plants with a full chromosome complement were more uniform than aneuploids. Many hexaploid somatic hybrids were also more vigorous than the dihaploid parents and could be grouped into two different classes on the basis of floral colour and tuber characteristics, the differences being due to their different dosage of parental genomes. Most of the tetraploid somatic hybrids showed pollen development halted at the tetrad stage as one of the parental clones contained a S. Stoloniferum cytoplasm. However, one tetraploid plant produced pollen grains with high viability. The chloroplast genome in the hybrid plants was determined by RFLP analysis. All of the hybrids had a cpDNA pattern identical to one parent, which contained either S. Tuberosum or S. Stoloniferum cpDNA. A slight preference for S. Tuberosum plastids were observed in hybrid plants. No correlation between pollen development and plastid type could be detected.

Microsporogenesis in three tetraploid somatic hybrids of potato and their di(ha)ploid fusion partners

The microsporogenesis of three somatic hybrids of potato, i.e. one tetraploid Solanum tuberosum (+) S. phureja, one tetraploid and one hypertetraploid S. tuberosum (+) desynaptic mutant, has been examined and compared with the microsporogenesis of the di(ha) ploid fusion partners. The somatic hybrids had a first meiotic division with uni-, bi-, and multivalents like that of tetraploid potatoes, illustrating introgression and dominance over desynapsis. Abnormal spindle orientations at second meiotic division, sporad types with reduced and unreduced cells and viable pollen occurred at various frequencies. Pollen fertility could not be predicted on the basis of pollen fertility of the fusion partners. Pollen sterility was partially due to abnormal chromosome numbers. Only the tetraploid S. tuberosum (+) desynaptic mutant produced normal amounts of viable seeds.

Tetraploid potato hybrids through protoplast fusions and analysis of their performance in the field

Data on the production of tetraploid hybrid plants after electrofusion of protoplasts from various diploid (2n = 2x =24) Solarium tuberosum and S. phureja are reported. Ten different fusion combinations were used. Six hybrids with the tetraploid chromosome number 2n=4x=48 were tested under field conditions for their performance in various agronomic traits (tuber type, tuber yield, underwater weight of tubers, numbers of tubers, mean weight per tuber). Tuber yield in five of the six hybrid clones was similar to that of cv Bintje. One hybrid clone (35-4) had three times higher tuber yield than cv Bintje. The mean tuber weight of this hybrid was similar to that of cv Bintje. The results of this study prove that fertile tetraploid somatic hybrids having similar or higher tuber yield than that of cv Bintje can be obtained through somatic hybridization. This technique is now included in commercial potato breeding programs in The Netherlands.

Selection of somatic hybrids between diploid clones of potato (Solanum tuberosum L.) transformed by direct gene transfer

Five diploid potato clones have been transformed by electroporation of protoplasts with different selectable markers. The resulting diploid regenerated plants have been used in somatic hybridization. It has been shown that hybrid cell selection on the basis of antibiotic or herbicide resistances brought by the two parents of fusion is an efficient method for the recovery of tetraploid somatic hybrids.

Fate of introduced genetic markers in transformed root clones and regenerated plants of monohaploid and diploid potato genotypes

Agrobacterium transformation of stem internodes of four monohaploid (839-79, 849-7, 851-23, 855-1) and two diploid (M9 and HH260) potato genotypes using hairy root-inducing single (LBA 1020, LBA 9365, LBA 9402) and binary (LBA 1060KG) vectors is reported. Various media and successive culture steps were tested for plant regeneration from different transformed root clones. The fate of introduced genetic markers in root clones and regenerated plants (hairy root phenotype, hormone autotrophy, opine production, kanamycin resistance, β-glucuronidase activity), the ploidy stability and protoplast yield were analysed. The transformation efficiency of stem internodes (hairy root production) and the regeneration capacity of the transformed root clones greatly differed within and between the various potato genotypes. The regenerated plants obtained after transformation with both types of vectors often showed the absence of one or more genetic markers. However, transformation with the binary Agrobacterium vector generally resulted in the stable presence of the opines in all transformed root clones and most regenerated plants. In HH260, transformation efficiency, plant regeneration of transformed root clones, protoplast yield and ploidy stability were the highest as compared to the other genotypes. The application of these transformed plants as marker lines in gene mapping and gene expression studies is indicated.

Somatic hybridization between anther-derived dihaploid clones of potato (Solanum tuberosum L.) and the identification of hybrid plants by isozyme analysis

Green mesophyll protoplasts of the dihaploid potato line 198∶2 (Solanum tuberosum L.) were fused with herbicide-bleached mesophyll protoplasts of the dihaploid potato line 67∶9 using a polyethylene glycol protocol. Heterokaryons were identified under a fluorescence microscope using the dual fluorescence of carboxyfluorescein-stained, herbicide-bleached protoplasts and the autofluorescence of green mesophyll protoplasts. About 20% of the protoplasts survived the fusion treatment, and the fusion frequency was 3%-4%. Unfused and fused protoplasts were mass cultured for 6 weeks after which vigorously growing calli were selected and transferred to shoot regeneration medium. Somatic hybrids were identified by a combination of five isozyme markers, and the ploidy level was determined by flow cytometry. Out of 15 calli that regenerated shoots, 6 plants derived from 2 different calli were identified as hexaploid somatic hybrids, while one morphologically deviant plant from a third callus was identified as a mixoploid that had lost some enzyme markers after 4 months of culturing.

Flow cytometric and karyological analysis of polysomaty and polyploidization during callus formation from leaf segments of various potato genotypes

Flow cytometry and karyological analysis were used to study polysomaty and polyploidization during the first 15 days of callus formation in leaf segments from shoot cultures and greenhouse-grown plants of various lines and genotypes of Solanum tuberosum and S. phureja. The greenhouse-grown plants showed a higher degree of polysomaty (77% and 49% of polyploidized nuclei) than the shoot cultures (< 3%). During the in vitro culture period, polyploidization occurred through endoreduplication. Segments of the five shoot cultures showed up to 87%, 53%, 59%, 45% and 56% polyploidization, respectively; the DNA content of corresponding interphase nuclei amounted to 8C, 16C, 16C, 16C and 8C, and the chromosome numbers to 96. Segments from the two greenhouse-grown genotypes showed up to 87% and 84% polyploidization; the DNA content amounted to 32C and 16C, and the chromosome numbers to 192 and 96. The number of reduplication cycles was species-dependent; the degree of polyploidization was dependent on the initial ploidy level of the genotypes. Cell proliferation did not take place at a constant rate. The maximum frequencies of metaphases (52-171 per segment) occurred after 1 week of culture and were correlated with the ploidy level of the genotypes. Cells were triggered to mitosis rather than to endoreduplication. Cell cycles with normal monochromosomes could be shorter than 1 day, and those with diplochromosomes lasted at least 1 day. Polysomaty, degree of polyploidization and abnormal nuclear processes are discussed in relation to the origin of genetic instability early in culture.

Field assessment of dihaploid Solatium tuberosum and S. brevidens somatic hybrids

Following both chemical and electrical fusion of protoplasts of a dihaploid line of potato (Solanum tuberosum), (PDH40), with those of the wild species, Solanum brevidens, 11 and 40 somatic hybrid plants, respectively were obtained. Fifteen of these somatic hybrid genotypes and the two parents were studied further in a small field trial to assess field performance and phenotypic variability. In the UK, somatic hybrid plants are classified as genetically engineered organisms, and the UK Advisory Committee on Genetic Manipulation have imposed various restrictions on field experiments. Examination of the somatic hybrids in the field showed extensive phenotypic variability, and no two genotypes were identical. Some of the variation reflected changes in chromosome numbers, but other factors were also involved. Half the somatic hybrid genotypes produced tubers in the field, although the tubers were smaller and differed morphologically from those of PDH40. The results of the study suggest that the extent of somaclonal variation manifested in somatic hybrids is greater than that found in protoplast-derived plants of potato. The implications of this observation and the current regulations concerning field experiments of somatic hybrid plants in the UK are discussed.

Production of somatic hybrids by electrofusion in Solanum

Conditions are described for large scale electrofusion of mesophyll protoplasts of dihaploid S. tuberosum with those of diploid S. brevidens. Overall fusion frequencies of 20%-30% were achieved, and following fusion, large numbers of protoplast-derived calli were obtained. Putative somatic hybrid plants were selected from the regenerated shoots by examining their morphological characteristics. Twenty-one somatic hybrids were confirmed by isoenzyme analysis and six somatic hybrids were further confirmed by Southern hybridization. Tetraploid hybrids were obtained, but cytogenetic studies indicated that more of the regenerated hybrids were hexaploid than had previously been found following chemical fusion of the same partners. Some advantages of electrofusion over chemical fusion are discussed.

Production of potato monohaploids (2n=x=12) through prickle pollination

Data are presented on the potential of gynogenesis for the production of monohaploids and on factors affecting their frequency and relative vigour. Diploid Solanum tuberosum L. and S. tuberosumxS. phureja Juz et Buk hybrids were used as maternal parents and selected S. phureja clones as prickle pollinators with embryo-spot and nodal band as dominant seed and plant marker. About 2 million seeds were screened for absence of embryo-spot. After raising plants from phenotypically spotless seeds, further screening for absence of nodal bands and for ploidy level was carried out. Finally more than 500 monohaploid plants from three genetically different groups of maternal parents were obtained. Frequency and vigour of the monohaploids were clearly dependent on their maternal genotypes. The data also indicated an effect of the pollinator genotype, the physiological stage of the maternal plant and the environment on monohaploid frequency. On the basis of these results the possibility of breeding for a higher monohaploid production rate and for more stable and vigorous monohaploids is discussed. Furthermore, gynogenesis and androgenesis are compared. It is suggested that both should be used in order to obtain monohaploids from sufficiently various diploid breeding material.

Relative performance of monohaploid potato clones and their diploid parents at plant level and after protoplast isolation and subsequent fusion

Plant growth performance was studied in 118 potato monohaploids and in their diploid parents. Of these monohaploids 76 were also investigated at the protoplast level and eight of these were used in protoplast fusion experiments as well. No correlation was found between relative performance of greenhouse grown and in vitro grown plants. No or only weak correlations were found between different in vitro characteristics such as plant growth, protoplast yield per gram plant material, plating efficiency and callus growth. This indicates the unpredictability of these characters.The protoplast fusion experiments indicated that only in some genotype combinations increased callus growth rates may be found. However, it is not clear whether such calli were hybrids or not. In protoplast monocultures only diploid and tetraploid regenerants were obtained. After fusion, tetraploids but also some triploids could be regenerated. The finding of triploids indicates that monoploid protoplasts were involved in fusion. Isozyme analysis and morphological assessment of the plants pointed out that the majority of the fusion regenerants were hybrids. The implications of these results are discussed.

Uniformity of plants regenerated from orange (Citrus sinensis Osb.) protoplasts

Using 25 plants (protoclones) regenerated from orange (Citrus sinensis Osb.) protoplasts, several characters, including leaf and flower morphology, leaf oil, isozyme patterns and chromosome number, were examined. No significant variations in each character were recorded among the protoclones. Uniformity observed among protoclones was identical to that of nucellar seedlings.

Improvements in regeneration from protoplasts of potato and studies on chromosome stability : 1. The effect of initial culture media

Regeneration of plants from protoplasts of potato (Solanum tuberosum) cv. 'Maris Bard' has been achieved from four different initial culture media (ET2, ET3, CLG, VkCLG). These media differed in their hormone, salt and sugar content. Plating efficiencies were highest in the VkCLG medium, but no correlation was found between plating efficiency and regeneration frequency (i.e. the percentage of calli producing shoots). Regeneration frequencies were high on all four media; up to 95% on ET3. Chromosome counts of up to 50 regenerants selected at random from the four treatments showed no significant differences between any of the treatments, in the proportions of plants which were euploid (48), aneuploid at the tetraploid level (48±), and aneuploid with high chromosome numbers (48+ +). Highly significant differences were present, however, between shoots which rooted quickly (predominantly euploid) and those which rooted only after transfer to a rooting medium (predominantly 48+ +). Overall more than 60% of the regenerants were normal (2n=4x=48) and this is a considerable improvement on our earlier work in this cultivar (4% normal). These findings are discussed in relation to factors affecting chromosome stability. Chromosome structural rearrangements are also described.