Electrical fusion for optimal formation of protoplast heterokaryons in Nicotiana

Modern Technologies Provide New Opportunities for Somatic Hybridization in the Breeding of Woody Plants

Advances in cell fusion technology have propelled breeding into the realm of somatic hybridization, enabling the transfer of genetic material independent of sexual reproduction. This has facilitated genome recombination both within and between species. Despite its use in plant breeding for over fifty years, somatic hybridization has been limited by cumbersome procedures, such as protoplast isolation, hybridized-cell selection and cultivation, and regeneration, particularly in woody perennial species that are difficult to regenerate. This review summarizes the development of somatic hybridization, explores the challenges and solutions associated with cell fusion technology in woody perennials, and outlines the process of protoplast regeneration. Recent advancements in genome editing and plant cell regeneration present new opportunities for applying somatic hybridization in breeding. We offer a perspective on integrating these emerging technologies to enhance somatic hybridization in woody perennial plants.

Challenges and Approaches to Crop Improvement Through C3-to-C4 Engineering

With a rapidly growing world population and dwindling natural resources, we are now facing the enormous challenge of increasing crop yields while simultaneously improving the efficiency of resource utilization. Introduction of C4 photosynthesis into C3 crops is widely accepted as a key strategy to meet this challenge because C4 plants are more efficient than C3 plants in photosynthesis and resource usage, particularly in hot climates, where the potential for productivity is high. Lending support to the feasibility of this C3-to-C4 engineering, evidence indicates that C4 photosynthesis has evolved from C3 photosynthesis in multiple lineages. Nevertheless, C3-to-C4 engineering is not an easy task, as several features essential to C4 photosynthesis must be introduced into C3 plants. One such feature is the spatial separation of the two phases of photosynthesis (CO₂ fixation and carbohydrate synthesis) into the mesophyll and bundle sheath cells, respectively. Another feature is the Kranz anatomy, characterized by a close association between the mesophyll and bundle sheath (BS) cells (1:1 ratio). These anatomical features, along with a C4-specific carbon fixation enzyme (PEPC), form a CO₂-concentration mechanism that ensures a high photosynthetic efficiency. Much effort has been taken in the past to introduce the C4 mechanism into C3 plants, but none of these attempts has met with success, which is in my opinion due to a lack of system-level understanding and manipulation of the C3 and C4 pathways. As a prerequisite for the C3-to-C4 engineering, I propose that not only the mechanisms that control the Kranz anatomy and cell-type-specific expression in C3 and C4 plants must be elucidated, but also a good understanding of the gene regulatory network underlying C3 and C4 photosynthesis must be achieved. In this review, I first describe the past and current efforts to increase photosynthetic efficiency in C3 plants and their limitations; I then discuss a systems approach to tackling down this challenge, some practical issues, and recent technical innovations that would help us to solve these problems.

Efficient intergeneric fusion of pea (Pisum sativum L.) and grass pea (Lathyrus sativus L.) protoplasts

Large numbers of viable protoplasts of pea (Pisum sativum) and grass pea (Lathyrus sativus) were efficiently and reproducibly obtained and, for the first time, fused. Different procedures for fusion were compared, based either on electrofusion (750, 1000, 1250 or 1500 V cm(-1)), or on the use of macro or micromethods with a polyethylene glycol (PEG 6000 or PEG 1540), or a glycine/high pH solution. Over 10% of viable heterokaryons were obtained, with PEG as the most efficient and reproducible agent for protoplast fusion (>20% of viable heterokaryons). Both the division of heterokaryons and the formation of small calluses were observed.

Selection of hybrid plants obtained by electrofusion of vacuolated x evacuolated plant protoplasts in hypo-osmolar solution

Vacuolated and evacuolated tobacco mesophyll protoplasts were electrically fused in hypo-osmolar media by using an alternating field of modulated amplitude for alignment. The vacuolated fusion partner was isolated from Nicotiana tabaccum L. cv Xanthi and the evacuolated one from the streptomycin-resistant strain Nicotiana tabaccum L. cv Petit Havana SR1. The field and osmolarity conditions used ensured relatively high yields of heterologous fusion products despite the differences in density and size of the parental cells. After removal of the evacuolated, streptomycin-resistant fused and unfused protoplasts by flotation of vacuole-containing cells on iso-osmolar sucrose medium, the cybrids and hybrids were cultured in 25 microliters drops of agarose. During the first 5 weeks the non-fused Xanthi-protoplasts were used as a nurse culture. After addition of streptomycin to the growth media, cybrids and hybrids were successfully selected whereas fused and unfused vacuole-containing protoplasts died within 6 days. Only the streptomycin-resistant cybrids and hybrids developed into whole plants. On average a yield of 0.025% of streptomycin-resistant plants (referred to the total number of parental cells) was obtained. Polyacrylamide gel electrophoresis of leaf extracts of these plants showed that at least 50% of the streptomycin-resistant plants had a hybrid-esterase isoenzyme pattern. The protocol can be generalised by fusion of iodoacetamide-inactivated vacuolated protoplasts with meristematic (or evacuolized) protoplasts carrying no genetic marker. Use of evacolated protoplasts for electrofusion with vacuole-containing protoplasts therefore offers a way of overcoming the lack of suitable genetic markers for hybrid selection.

Facilitated electrofusion of vacuolated x evacuolated oat mesophyll protoplasts in hypo-osmolar media after alignment with an alternating field of modulated strength

Electrofusion of evacuolated and vacuolated oat leaf protoplasts is difficult because of the different size and density of these cells which results in separation of the two fusion partners during dielectrophoresis. The fusion yield of this cell system was considerably enhanced by electrofusion in hypo-osmolar media containing 0.4 M mannitol, 0.1 mM calcium acetate and 0.1% bovine serum albumin. This increase in yield was only achieved if the dielectrophoretically induced membrane contact between the two fusion partners was enhanced by an initial short 'burst' of higher field strength (500 V/cm, peak to peak, for 5 s followed by a reduction of to 90 V/cm, peak to peak, for 20 s, frequency 1 MHz). Due to the high field strength of the alternating field at the beginning of cell chain formation separation of fusion partners of different size and density was mainly avoided. Simultaneously, the short duration of this high field 'burst' avoided the generation of lethal effects in the cell membranes. The subsequent low field strength of the alternating field was sufficient to keep the aligned cells in position. Optimum fusion was induced by a single square pulse of 750 V/cm and 30 musec duration. The time required for rounding up of the heterologous fusion products decreased with decreasing osmolarity. Fusion resulted in a 5.7 +/- 1.2% yield of heterologous fusion products (compared to 0.7% using the conventional electrofusion protocol) as determined by flow cytometric assay. About 50% of the vacuolated oat protoplasts and 20-50% of the heterologous fusion products regenerated their cell walls within 5 days after hypo-osmolar treatment, but no cell divisions could be observed. Evacuolated oat protoplasts died after 2-3 days in culture without any detectable cell wall regeneration.

Determination of physical membrane properties of plant cell protoplasts via the electrofusion technique: prediction of optimal fusion yields and protoplast viability

By variation of physical parameters (field strength, pulse duration) which result in electrofusion and electroporation, properties of the plasma membrane of different types of plant cell protoplasts were analyzed. The lower threshold for that field pulse intensity at which membrane breakdown occurred (recorded as fusion event) depended on pulse duration, protoplast size, and protoplast type (tobacco, oat; vacuolated, evacuolated). This fusion characteristic of plant protoplasts can also be taken as a measure of the charging process of the membrane and allows thus a non-invasive determination of the time constant and the specific membrane capacitance. Although the fusion yield was comparable at pulse duration/field strength couples of, e.g., 10 μs/1.5 kV*cm(-1) and 200 μs/0.5 kV*cm(-1), hybrid viability was not. Rates of cell wall regeneration and cell division of tobacco mesophyll protoplasts were not affected but may have been increased at short pulse duration/high field strength. Plating efficiency, in contrast, was significantly decreased with longer pulse duration at low field strengths.

Thermofusion of cells

This communication provides evidence that the thermo-osmotically induced membrane defects and fluxes occurring in plant protoplasts may initiate internalization and fusion of adjacent cells. This phenomenon is called thermofusion of cells.

Electrofusion of protoplasts from celery (Apium graveolens L.) with protoplasts from the filamentous fungus Aspergillus nidulans

A method was developed for electrofusion of higher-plant protoplasts from celery and protoplasts from the filamentous fungus Aspergillus nidulans. Initially, methods for the fusion of protoplasts from ecch species were determined individually and, subsequently, electrical parameters for fusion between the species were determined. Pronase-E treatment and the presence of calcium ions markedly increased celery protoplast stability under the electrical conditions required and increased fusion frequency with A. nidulans protoplasts. A reduction in protoplast viability was observed after electrofusion but the majority of the protoplasts remained viable over a 24-h incubation period. A small decline in protoplast respiration rate occurred during incubation but those celery protoplasts fused with A. nidulans protoplasts showed elevated respiration rates for 3 h after electrofusion.

Asymmetric hybridization between cytoplasmic male-sterile (CMS) and fertile rice (Oryza safiva L.) protoplasts

(60)Co-irradiated protoplasts of the cytoplasmic male-sterile line A-58 CMS (Oryza saliva L.) were electrofused with iodoacetamide (IOA)-treated protoplasts of the fertile (normal) rice cultivar 'Fujiminori'. Seven of the colonies that formed were identified as cytoplasmic hybrids (cybrids): they all had the peroxidase isozymes of the fertile 'Fujiminori' parent, but contained four plasmid-like DNAs (Bl, B2, B3 and B4) from the sterile A-58 CMS parent in their mitochondrial genomes. In addition, digestion of cybrid mtDNA gave a set of restriction fragments that differed from those of the parents.

Enrichment for Nicotiana heterokaryons after protoplast fusion and subsequent growth in agarose microdrops

Protoplasts isolated from Nicotiana tabacum L. leaves and Nicotiana suaveolens Lehm. cell suspensions have been fused with polyethylene glycol (PEG). Enrichment for heterokaryons was based on a Percoll flotation protocol which allowed a preparation with 50% heterokaryons to be obtained. The heterokaryons developed into calli whose hybrid nature was shown by polyacrylamide gel electrophoresis of esterase isoenzymes. Sensitivity of the mesophyll protoplasts to PEG and different buoyant densities of the heterokaryon and cell-suspension protoplasts contribute to the enrichment. The 50%-fusion figure following purification is an improvement on standard PEG procedures.Heterokaryons obtained were embedded in 20μl drops of agarose and placed in a liquid nurse culture that allows optimum growth of the heterokaryons and maintains a physical boundary between the heterokaryons and the nurse culture. Once colonies develop, the agarose microdrop is removed from the nurse culture and placed on shoot-induction medium. Agarose microdrops containing the heterokaryons can be readily removed at any stage and processed for electron microscopy to follow the early stages of colony development.The procedures we have utilised provide a robust physical selection method that allows the total variation from a heterokaryon population to be expressed.

A selection method for the synthesis of triploid hybrids by fusion of microspore protoplasts (n) with somatic cell protoplasts (2n)

Microspore protoplasts (n) isolated at the tetrad stage from plants of Nicotiana tabacum Km(+) (2n=4x=48) were fused with somatic cell protoplasts (2n) of WT N. rustica (2n=4x=48) to produce triploid plants. A total of 21.2×10(6) microspore protoplasts were fused with 11.2×10(6) somatic cell protoplasts using the high pH/Ca(+ +) method. Microspore protoplasts did not divide and WT N. rustica protoplasts stopped dividing when the protoplast-derived colonies were transferred to a selection medium containing kanamycin. A total of 104 actively growing green colonies were recovered on the selection medium. Ninety-six of these colonies were tested for their hybrid nature by PAGE of peroxidases and were found to contain bands characteristic of both parents. Hybrid nature of the plants regenerated from some of the selected colonies was confirmed by IEF of leaf esterases, by NPT II activity assay and by hybridizing total DNAs restricted with EcoR I to a cloned 18s rDNA fragment. Root tip squashes of six of the hybrid plants revealed chromosome numbers ranging from 58-72. From chromosomal and biochemical analysis, it can be concluded that the procedure of fusing microspore protoplasts (n) of species A carrying a dominant selection marker with WT somatic cell protoplasts (2n) of species B can be a convenient selection method for the synthesis of triploid plants. The significance of triploids lies in their subsequent use for transferring alien chromosomes and genes of species A to species B.

Production of somatic hybrids by electrofusion in Solanum

Conditions are described for large scale electrofusion of mesophyll protoplasts of dihaploid S. tuberosum with those of diploid S. brevidens. Overall fusion frequencies of 20%-30% were achieved, and following fusion, large numbers of protoplast-derived calli were obtained. Putative somatic hybrid plants were selected from the regenerated shoots by examining their morphological characteristics. Twenty-one somatic hybrids were confirmed by isoenzyme analysis and six somatic hybrids were further confirmed by Southern hybridization. Tetraploid hybrids were obtained, but cytogenetic studies indicated that more of the regenerated hybrids were hexaploid than had previously been found following chemical fusion of the same partners. Some advantages of electrofusion over chemical fusion are discussed.

Asymmetric hybridization in Nicotiana by fusion of irradiated protoplasts

Mesophyll protoplasts of a kanamycin-resistant, nopaline-positive Nicotiana plumbaginifolia seed line were inactivated by γ-irradiation and electrically fused with unirradiated mesophyll protoplasts of N. tabacum. Hybrids were selected on kanamycin and regenerated. Genetic material from N. plumbaginifolia was detected in these plants by the following criteria: (1) morphology, (2) esterase isozyme profiles, and (3) the presence of nopaline in leaf extracts. All of the plants regenerated were morphologically more similar to N. tabacum than to N. plumbaginifolia, and many were indistinguishable from N. tabacum. It was found that 37 plants displayed one or two esterases characteristic of N. plumbaginifolia in addition to a full set of esterases from N. tabacum. Based on their esterases, we have classified these plants as somatic hybrids. However, irradiation has clearly reduced the amount of N. plumbaginifolia genetic material that they retain; 24 plants were found that had only N. tabacum esterases but that produced nopaline and were kanamycin resistant. Genomic DNA from several of these plants was probed by Southern blotting for the presence of the authentic neomycin phosphotransferase gene (kanamycin-resistance gene) - all were found to contain the gene. These plants were classified as asymmetric hybrids. Finally, 25 plants were regenerated that were kanamycin sensitive, negative for nopaline, and contained only N. tabacum esterases. All of the regenerated plants, including this final category, were male sterile. As transferring the N. plumbaginifolia cytoplasm to an N. tabacum nuclear background results in an alloplasmic form of male sterility, all of the plants regenerated in this study appear to be cybrids irrespective of their nuclear constitution. Chromosome analysis of the asymmetric hybrids showed that most of them contained one more chromosome than is normal for N. tabacum. The somatic hybrids examined all had several additional chromosomes. Although male sterile, the asymmetric hybrids were female fertile to varying degrees and were successfully backcrossed with N. tabacum. Analysis of the resultant F1 progeny indicated that the kanamycin-resistance gene from N. plumbaginifolia is partially unstable during meiosis, as would be expected for factors inherited on an unpaired chromosome.

A versatile low-cost apparatus for cell electrofusion and other electrophysiological treatments

Instrumentation is described which will generate AC fields and DC square pulses for cell electrofusion, electroporation and other electrophysiological experiments. The equipment can generate a constant or intermittent AC field and a single square pulse, either alone or in combination. It can also generate a train of intermittent square pulses. The components for the instrumentation are commercially available and can be assembled by persons with little or no training in electronics. A design is given for a mass treatment chamber that can be easily constructed and viewed with a microscope.

Culture of plant somatic hybrids following electrical fusion

Electrically-induced protoplast fusion has been used to produce somatic hybrids between Nicotiana plumbaginifolia and Nicotiana tabacum. Following fusion of suspension culture protoplasts (N. plumbaginifolia) with mesophyll protoplasts (N. tabacum) heterokaryons were identified visually and their development was followed in culture. Because electrical fusion is a microtechnique, procedures were developed for culturing the heterokaryons in small numbers and at low density. The fusion and culture procedures described are rapid, uncomplicated and repeatable. Good cell viabilities indicate that the fusion procedure is not cytotoxic. Fused material was cultured 1-2 days at high density in modified K3 medium (Nagy and Maliga 1976). The heterokaryons were isolated manually and grown, at low density in conditioned media. Calli have been regenerated. Esterase isozyme patterns confirm the hybrid character of calli and clonally-derived plantlets recovered from these fusions.