Conjugal transfer and expression of streptococcal transposons in Clostridium acetobutylicum

Metabolic engineering of Clostridium autoethanogenum for selective alcohol production

Gas fermentation using acetogenic bacteria such as Clostridium autoethanogenum offers an attractive route for production of fuel ethanol from industrial waste gases. Acetate reduction to acetaldehyde and further to ethanol via an aldehyde: ferredoxin oxidoreductase (AOR) and alcohol dehydrogenase has been postulated alongside the classic pathway of ethanol formation via a bi-functional aldehyde/alcohol dehydrogenase (AdhE). Here we demonstrate that AOR is critical to ethanol formation in acetogens and inactivation of AdhE led to consistently enhanced autotrophic ethanol production (up to 180%). Using ClosTron and allelic exchange mutagenesis, which was demonstrated for the first time in an acetogen, we generated single mutants as well as double mutants for both aor and adhE isoforms to confirm the role of each gene. The aor1+2 double knockout strain lost the ability to convert exogenous acetate, propionate and butyrate into the corresponding alcohols, further highlighting the role of these enzymes in catalyzing the thermodynamically unfavourable reduction of carboxylic acids into alcohols.

•

180% improvement in C. autoethanogenum ethanol production via metabolic engineering.

•

Confirmed role of AOR in autotrophic ethanol production of acetogens.

•

Generated both aor and adhE mutants of C. autoethanogenum..

•

Demonstrated allelic exchange mutagenesis for stable deletions in acetogens.

•

Inactivation of adhE and aor2, but not aor1, improves autotrophic ethanol production.

Insights into CO2 Fixation Pathway of Clostridium autoethanogenum by Targeted Mutagenesis

The future sustainable production of chemicals and fuels from nonpetrochemical resources and reduction of greenhouse gas emissions are two of the greatest societal challenges. Gas fermentation, which utilizes the ability of acetogenic bacteria such as Clostridium autoethanogenum to grow and convert CO₂ and CO into low-carbon fuels and chemicals, could potentially provide solutions to both. Acetogens fix these single-carbon gases via the Wood-Ljungdahl pathway. Two enzyme activities are predicted to be essential to the pathway: carbon monoxide dehydrogenase (CODH), which catalyzes the reversible oxidation of CO to CO₂, and acetyl coenzyme A (acetyl-CoA) synthase (ACS), which combines with CODH to form a CODH/ACS complex for acetyl-CoA fixation. Despite their pivotal role in carbon fixation, their functions have not been confirmed in vivo. By genetically manipulating all three CODH isogenes (acsA, cooS1, and cooS2) of C. autoethanogenum, we highlighted the functional redundancies of CODH by demonstrating that cooS1 and cooS2 are dispensable for autotrophy. Unexpectedly, the cooS1 inactivation strain showed a significantly reduced lag phase and a higher growth rate than the wild type on H₂ and CO₂. During heterotrophic growth on fructose, the acsA inactivation strain exhibited 61% reduced biomass and the abolishment of acetate production (a hallmark of acetogens), in favor of ethanol, lactate, and 2,3-butanediol production. A translational readthrough event was discovered in the uniquely truncated (compared to those of other acetogens) C. autoethanogenum acsA gene. Insights gained from studying the function of CODH enhance the overall understanding of autotrophy and can be used for optimization of biotechnological production of ethanol and other commodities via gas fermentation.

Gas fermentation is an emerging technology that converts the greenhouse gases CO₂ and CO in industrial waste gases and gasified biomass into fuels and chemical commodities. Acetogenic bacteria such as Clostridium autoethanogenum are central to this bioprocess, but the molecular and genetic characterization of this microorganism is currently lacking. By targeting all three of the isogenes encoding carbon monoxide dehydrogenase (CODH) in C. autoethanogenum, we identified the most important CODH isogene for carbon fixation and demonstrated that genetic inactivation of CODH could improve autotrophic growth. This study shows that disabling of the Wood-Ljungdahl pathway via the inactivation of acsA (encodes CODH) significantly impairs heterotrophic growth and alters the product profile by abolishing acetate production. Moreover, we discovered a previously undescribed mechanism for controlling the production of this enzyme. This study provides valuable insights into the acetogenic pathway and can be used for the development of more efficient and productive strains for gas fermentation.

Gas Fermentation-A Flexible Platform for Commercial Scale Production of Low-Carbon-Fuels and Chemicals from Waste and Renewable Feedstocks

There is an immediate need to drastically reduce the emissions associated with global fossil fuel consumption in order to limit climate change. However, carbon-based materials, chemicals, and transportation fuels are predominantly made from fossil sources and currently there is no alternative source available to adequately displace them. Gas-fermenting microorganisms that fix carbon dioxide (CO2) and carbon monoxide (CO) can break this dependence as they are capable of converting gaseous carbon to fuels and chemicals. As such, the technology can utilize a wide range of feedstocks including gasified organic matter of any sort (e.g., municipal solid waste, industrial waste, biomass, and agricultural waste residues) or industrial off-gases (e.g., from steel mills or processing plants). Gas fermentation has matured to the point that large-scale production of ethanol from gas has been demonstrated by two companies. This review gives an overview of the gas fermentation process, focusing specifically on anaerobic acetogens. Applications of synthetic biology and coupling gas fermentation to additional processes are discussed in detail. Both of these strategies, demonstrated at bench-scale, have abundant potential to rapidly expand the commercial product spectrum of gas fermentation and further improve efficiencies and yields.

Reconstruction of an acetogenic 2,3-butanediol pathway involving a novel NADPH-dependent primary-secondary alcohol dehydrogenase

Acetogenic bacteria use CO and/or CO2 plus H2 as their sole carbon and energy sources. Fermentation processes with these organisms hold promise for producing chemicals and biofuels from abundant waste gas feedstocks while simultaneously reducing industrial greenhouse gas emissions. The acetogen Clostridium autoethanogenum is known to synthesize the pyruvate-derived metabolites lactate and 2,3-butanediol during gas fermentation. Industrially, 2,3-butanediol is valuable for chemical production. Here we identify and characterize the C. autoethanogenum enzymes for lactate and 2,3-butanediol biosynthesis. The putative C. autoethanogenum lactate dehydrogenase was active when expressed in Escherichia coli. The 2,3-butanediol pathway was reconstituted in E. coli by cloning and expressing the candidate genes for acetolactate synthase, acetolactate decarboxylase, and 2,3-butanediol dehydrogenase. Under anaerobic conditions, the resulting E. coli strain produced 1.1 ± 0.2 mM 2R,3R-butanediol (23 μM h(-1) optical density unit(-1)), which is comparable to the level produced by C. autoethanogenum during growth on CO-containing waste gases. In addition to the 2,3-butanediol dehydrogenase, we identified a strictly NADPH-dependent primary-secondary alcohol dehydrogenase (CaADH) that could reduce acetoin to 2,3-butanediol. Detailed kinetic analysis revealed that CaADH accepts a range of 2-, 3-, and 4-carbon substrates, including the nonphysiological ketones acetone and butanone. The high activity of CaADH toward acetone led us to predict, and confirm experimentally, that C. autoethanogenum can act as a whole-cell biocatalyst for converting exogenous acetone to isopropanol. Together, our results functionally validate the 2,3-butanediol pathway from C. autoethanogenum, identify CaADH as a target for further engineering, and demonstrate the potential of C. autoethanogenum as a platform for sustainable chemical production.

2,3-butanediol production by acetogenic bacteria, an alternative route to chemical synthesis, using industrial waste gas

2,3-Butanediol (23BD) is a high-value chemical usually produced petrochemically but which can also be synthesized by some bacteria. To date, the best microbial 23BD production rates have been observed using pathogenic bacteria in fermentation systems that depend on sugars as the carbon and energy sources for product synthesis. Here we present evidence of 23BD production by three nonpathogenic acetogenic Clostridium species-Clostridium autoethanogenum, C. ljungdahlii, and C. ragsdalei-using carbon monoxide-containing industrial waste gases or syngas as the sole source of carbon and energy. Through an analysis of the C. ljungdahlii genome, the complete pathway from carbon monoxide to 23BD has been proposed. Homologues of the genes involved in this pathway were also confirmed for the other two species investigated. A gene expression study demonstrates a correlation between mRNA accumulation from 23BD biosynthetic genes and the onset of 23BD production, while a broader expression study of Wood-Ljungdahl pathway genes provides a transcription-level view of one of the oldest existing biochemical pathways.

Clostridium ljungdahlii represents a microbial production platform based on syngas

Clostridium ljungdahlii is an anaerobic homoacetogen, able to ferment sugars, other organic compounds, or CO(2)/H(2) and synthesis gas (CO/H(2)). The latter feature makes it an interesting microbe for the biotech industry, as important bulk chemicals and proteins can be produced at the expense of CO(2), thus combining industrial needs with sustained reduction of CO and CO(2) in the atmosphere. Sequencing the complete genome of C. ljungdahlii revealed that it comprises 4,630,065 bp and is one of the largest clostridial genomes known to date. Experimental data and in silico comparisons revealed a third mode of anaerobic homoacetogenic metabolism. Unlike other organisms such as Moorella thermoacetica or Acetobacterium woodii, neither cytochromes nor sodium ions are involved in energy generation. Instead, an Rnf system is present, by which proton translocation can be performed. An electroporation procedure has been developed to transform the organism with plasmids bearing heterologous genes for butanol production. Successful expression of these genes could be demonstrated, leading to formation of the biofuel. Thus, C. ljungdahlii can be used as a unique microbial production platform based on synthesis gas and carbon dioxide/hydrogen mixtures.

Pathway for H2O2 and O2 detoxification in Clostridium acetobutylicum

An unusual non-haem diiron protein, reverse rubrerythrin (revRbr), is known to be massively upregulated in response to oxidative stress in the strictly anaerobic bacterium Clostridium acetobutylicum. In the present study both in vivo and in vitro results demonstrate an H2O2 and O2 detoxification pathway in C. acetobutylicum involving revRbr, rubredoxin (Rd) and NADH : rubredoxin oxidoreductase (NROR). RevRbr exhibited both NADH peroxidase (NADH : H2O2 oxidoreductase) and NADH oxidase (NADH : O2 oxidoreductase) activities in in vitro assays using NROR as the electron-transfer intermediary from NADH to revRbr. Rd increased the NADH consumption rate by serving as an intermediary electron-transfer shuttle between NROR and revRbr. While H2O2 was found to be the preferred substrate for revRbr, its relative oxidase activity was found to be significantly higher than that reported for other Rbrs. A revRbr-overexpressing strain of C. acetobutylicum showed significantly increased tolerance to H2O2 and O2 exposure. RevRbr thus appears to protect C. acetobutylicum against oxidative stress by functioning as the terminal component of an NADH peroxidase and NADH oxidase.

Desulfoferrodoxin of Clostridium acetobutylicum functions as a superoxide reductase

Desulfoferrodoxin (cac2450) of Clostridium acetobutylicum was purified after overexpression in E. coli. In an in vitro assay the enzyme exhibited superoxide reductase activity with rubredoxin (cac2778) of C. acetobutylicum as the proximal electron donor. Rubredoxin was reduced by ferredoxin:NADP(+) reductase from spinach and NADPH. The superoxide anions, generated from dissolved oxygen using Xanthine and Xanthine oxidase, were reduced to hydrogen peroxide. Thus, we assume that desulfoferrodoxin is the key factor in the superoxide reductase dependent part of an alternative pathway for detoxification of reactive oxygen species in this obligate anaerobic bacterium.

Characterization and development of two reporter gene systems for Clostridium acetobutylicum

The use of lacZ from Thermoanaerobacterium thermosulfurigenes (encoding beta-galactosidase) and lucB from Photinus pyralis (encoding luciferase) as reporter genes in Clostridium acetobutylicum was analyzed with promoters of genes required for solventogenesis and acidogenesis. Both systems proved to be well suited and allowed the detection of differences in promoter strength at least up to 100-fold. The luciferase assay could be performed much faster and comes close to online measurement. Resequencing of lacZ revealed a sequence error in the original database entry, which resulted in beta-galactosidase with an additional 31 amino acids. Cutting off part of the gene encoding this C terminus resulted in decreased enzyme activity. The lacZ reporter data showed that bdhA (encoding butanol dehydrogenase A) is expressed during the early growth phase, followed by sol (encoding butyraldehyde/butanol dehydrogenase E and coenzyme A transferase) and bdhB (encoding butanol dehydrogenase B) expression. adc (encoding acetoacetate decarboxylase) was also induced early. There is about a 100-fold difference in expression between adc and bdhB (higher) and bdhA and the sol operon (lower). The lucB reporter activity could be increased 10-fold by the addition of ATP to the assay. Washing of the cells proved to be important in order to prevent a red shift of bioluminescence in an acidic environment (for reliable data). lucB reporter measurements confirmed the expression pattern of the sol and ptb-buk (encoding phosphotransbutyrylase and butyrate kinase) operons as determined by the lacZ reporter and showed that the expression level from the ptb promoter is 59-fold higher than that from the sol operon promoter.

Molecular analysis of the mannitol operon of Clostridium acetobutylicum encoding a phosphotransferase system and a putative PTS-modulated regulator

Clostridium acetobutylicum DSM 792 accumulates and phosphorylates mannitol via a phosphoenolpyruvate (PEP)-dependent phosphotransferase system (PTS). PEP-dependent mannitol phosphorylation by extracts of cells grown on mannitol required both soluble and membrane fractions. Neither the soluble nor the membrane fraction could be complemented by the opposite fraction prepared from glucose-grown cells, indicating that the mannitol-specific PTS consists of both a soluble (IIA) and a membrane-bound (IICB) component. The mannitol (mtl) operon of C. acetobutylicum DSM 792 comprises four genes in the order mtlARFD. Sequence analysis of deduced protein products indicated that the mtlA and mtlF genes respectively encode the IICB and IIA components of the mannitol PTS, which is a member of the fructose-mannitol (Fru) family. The mtlD gene product is a mannitol-1-phosphate dehydrogenase, while mtlR encodes a putative transcriptional regulator. MtlR contains two PTS regulatory domains (PRDs), which have been found in a number of DNA-binding transcriptional regulators and in transcriptional antiterminators of the Escherichia coli BglG family. Also, near the C-terminus is a well-conserved signature motif characteristic of members of the IIA(Fru)/IIA(Mtl)/IIA(Ntr) PTS protein family. These regions are probably the sites of PTS-dependent phosphorylation to regulate the activity of the protein. A helix-turn-helix DNA-binding motif was not found in MtlR. Transcriptional analysis of the mtl genes by Northern blotting indicated that the genes were transcribed as a polycistronic operon, expression of which was induced by mannitol and repressed by glucose. Primer extension experiments identified a transcriptional start point 42 bp upstream of the mtlA start codon. Two catabolite-responsive elements (CREs), one of which overlapped the putative -35 region of the promoter, were located within the 100 bp upstream of the start codon. These sequences may be involved in regulation of expression of the operon.

Identification of D-proline reductase from Clostridium sticklandii as a selenoenzyme and indications for a catalytically active pyruvoyl group derived from a cysteine residue by cleavage of a proprotein

Highly active D-proline reductase was obtained from Clostridium sticklandii by a modified purification scheme. The cytoplasmic enzyme had a molecular mass of about 870 kDa and was composed of three subunits with molecular masses of 23, 26, and 45 kDa. The 23-kDa subunit contained a carbonyl group at its N terminus, which could either be labeled with fluorescein thiosemicarbazide or removed by o-phenylenediamine; thus, N-terminal sequencing became feasible for this subunit. L-[14C]proline was covalently bound to the 23-kDa subunit if proline racemase and NaBH4 were added. Selenocysteine was detected in the 26-kDa subunit, which correlated with an observed selenium content of 10.6 g-atoms in D-proline reductase. No other non-proteinaceous cofactor was identified in the enzyme. A 4.8-kilobase pair (kb) EcoRI fragment was isolated and sequenced containing the two genes prdA and prdB. prdA coding for a 68-kDa protein was most likely translated as a proprotein that was posttranslationally cleaved at a threonine-cysteine site to give the 45-kDa subunit and most probably a pyruvoyl-containing 23-kDa subunit. The gene prdB encoded the 26-kDa subunit and contained an in frame UGA codon for selenocysteine insertion. prdA and prdB were transcribed together on a transcript of 4.5 kb; prdB was additionally transcribed as indicated by a 0.8-kb mRNA species.

Sequence analysis and heterologous expression of the groE genes from Thermoanaerobacter sp. Rt8.G4

The groE homologous genes of the anaerobic thermophile Thermoanaerobacter sp. Rt8.G4 (TRt) have been isolated, sequenced and analysed. The TRt groES and groEL encode subunits of chaperonin 10 (Cpn10) and chaperonin 60 (Cpn60) of 94 and 541 amino acids, respectively, and are arranged in that order forming the open reading frames (ORFs) of a bicistronic operon. A controlling inverted repeat of chaperone expression (CIRCE) element lies between the consensus promoter of the operon and TRt groES. At optimum growth temperature (65 degreesC) the chaperonins of TRt are expressed, but production of Cpn60 increases significantly following temperature increases of 3-10 degreesC. Functionally intact recombinant TRt chaperonins were produced in Escherichia coli. However, owing to codon incompatibility, replacement of consecutive AGA codons in the gene encoding TRt Cpn60 was necessary for optimum expression in this heterologous host.

Physiology of carbohydrate to solvent conversion by clostridia

The solvent-forming clostridia have attracted interest because of their ability to convert a range of carbohydrates to end-products such as acetone, butanol and ethanol. Polymeric substrates such as cellulose, hemicellulose and starch are degraded by extracellular enzymes. The majority of cellulolytic clostridia, typified by Clostridium thermocellum, produce a multi-enzyme cellulase complex in which the organization of components is critical for activity against the crystalline substrate. A variety of enzymes involved in degradation of hemicellulose and starch have been identified in different strains. The products of degradation, and other soluble substrates, are accumulated via membrane-bound transport systems which are generally poorly characterized. It is clear, however, that the phosphoenolpyruvate-dependent phosphotransferase system (PTS) plays a major role in solute uptake in several species. Accumulated substrates are converted by intracellular enzymes to end-products characteristic of the organism, with production of ATP to support growth. The metabolic pathways have been described, but understanding of mechanisms of regulation of metabolism is incomplete. Synthesis of extracellular enzymes and membrane-bound transport systems is commonly subject to catabolite repression in the presence of a readily metabolized source of carbon and energy. While many genes encoding cellulases, xylanases and amylases have been cloned and sequenced, little is known of control of their expression. Although the mechanism of catabolite repression in clostridia is not understood, some recent findings implicate a role for the PTS as in other low G-C Gram-positive bacteria. Emphasis has been placed on describing the mechanisms underlying the switch of C. acetobutylicum fermentations from acidogenic to solventogenic metabolism at the end of the growth phase. Factors involved include a lowered pH and accumulation of undissociated butyric acid, intracellular concentration of ATP and reduced pyridine nucleotides, nutrient limitation, and the interplay between pathways of carbon and electron flow. Genes encoding enzymes of solvent pathways have been cloned and sequenced, and their expression correlated with the pattern of end-product formation in fermentations. There is evidence that the initiation of solvent formation may be subject to control mechanisms similar to other stationary-phase phenomena, including sporulation. The application of recently developed techniques for genetic manipulation of the bacterium is improving understanding of the regulatory circuits, but a complete molecular description of the control of solvent formation remains elusive. Experimental manipulation of the pathways of electron flow in other species has been shown to influence the range and yield of fermentation end-products. Acid-forming clostridia can, under appropriate conditions, be induced to form atypical solvents as products. While the mechanisms of regulation of gene expression are not at all understood, the capacity to adapt in this way further illustrates the metabolic flexibility of clostridial strains.

Acetate kinase from Clostridium acetobutylicum: a highly specific enzyme that is actively transcribed during acidogenesis and solventogenesis

Acetate kinase (ATP:phosphotransferase, EC 2.7.2.1) has been purified 294-fold from acid-producing cells of Clostridium acetobutylicum DSM 1731 to a specific activity of 1087 U mg-1 (ADP-forming direction). The dimeric enzyme consisted of subunits with a molecular mass of 43 kDa. The molecular mass of the native acetate kinase was in the range 87-94 kDa as judged by gel filtration and native gel electrophoresis. The enzyme showed high specificity for the substrates acetate and ATP, and maximal activity was obtained with Mn2+ as divalent cation. The presence of mercury compounds such as HgCl2 and p-hydroxymercuribenzoate resulted in an essential loss of activity. The apparent K(m) values of acetate, Mg-ATP, acetyl phosphate, and Mg-ADP were 73, 0.37, 0.58 and 0.71 mM. An activity-staining procedure for detection of acetate kinase in crude cell extracts after separation on native polyacrylamide gels was developed. A DNA fragment encoding 246 bp of the acetate kinase gene of C. acetobutylicum DSM 792 was cloned by a PCR-based approach. Northern blot analysis revealed transcription of the gene under acid- and solvent-producing conditions with no significant differences at the level of transcription.

The kdp system of Clostridium acetobutylicum: cloning, sequencing, and transcriptional regulation in response to potassium concentration

The complete sequence of the kdp gene region of Clostridium acetobutylicum has been determined. This part of the chromosome comprises two small open reading frames (orfZ and orfY), putatively encoding hydrophobic peptides, and the genes kdpA, kdpB, kdpC, and kdpX, followed by an operon encoding a pair of sensor-effector regulatory proteins (KdpD and KdpE). Except for orfZ, orfY, and kdpX, all genes showed significant homology to the kdp genes of Escherichia coli, encoding a high-affinity potassium transport ATPase and its regulators. The complete genome sequence of Synechocystis sp. strain PCC 6803 and a recently published part of the Mycobacterium tuberculosis genome indicate the existence of a kdp system in these organisms as well, but all three systems comprise neither a second orf upstream of kdpA nor an additional kdpX gene. Expression of the clostridial kdp genes, including the unique kdpX gene, was found to be inducible by low potassium concentrations. A transcription start point could be mapped upstream of orfZ. A promoter upstream of kdpD was active only under noninducing conditions. Lowering the potassium content of the medium led to formation of a common transcript (orfZYkdpABCXDE), with a putative internal RNase E recognition site, which could be responsible for the instability of the common transcript. Except for the two small peptides, all gene products could be detected in in vitro transcription-translation experiments.

Isolation of alpha-toxin, theta-toxin and kappa-toxin mutants of Clostridium perfringens by Tn916 mutagenesis

Clostridium perfringens is the causative agent of clostridial myonecrosis or gas gangrene and mediates infection and disease by producing numerous extracellular toxins, including alpha-toxin, theta-toxin and kappa-toxin. Tn916-mutagenesis was used to isolate mutants defective in their ability to produce either alpha-toxin or theta-toxin. Nine independently derived mutants were isolated. In four of these mutants Tn916 had inserted at sites located 193 bp or 198 bp upstream of the theta-toxin structural gene, pfoA. Four mutants contained large deletions, three in regions which encompassed the theta-toxin structural and regulatory genes pfoA and pfoR, respectively, and the kappa-toxin structural gene, colA, and one in a region encompassing the alpha-toxin structural gene, plc. These mutants should prove to be invaluable for further genetic studies aimed at determining the role of these toxins in virulence.

Molecular genetics and the initiation of solventogenesis in Clostridium beijerinckii (formerly Clostridium acetobutylicum) NCIMB 8052

A physical map of the Clostridium beijerinckii (formerly Clostridium acetobutylicum) NCIMB 8052 chromosome has been constructed, encompassing about 90 rare restriction sites. The 14 rrn operons together with about 40 genes have been assigned positions on the map. Genetic analysis and gene transfer have been developed in this organism to enable in vivo analysis of the roles of cloned genes using marker replacement technology. Experiments using the available genetic tools have shown that spo0A plays a cardinal role in controlling several aspects of the transition from exponential growth to stationary phase in C. beijerinckii. These include initiation of sporulation, accumulation of the storage polysaccharide, granulose, and production of acetone and butanol. Several C. beijerinckii and C. acetobutylicum genes concerned with fermentative metabolism, whose expression is modulated at the onset of solventogenesis, contain sequence motifs resembling 0A boxes in their 5' regulatory regions. This invites the speculation that they are under the direct control of Spo0A, and additional data are now required to test this prediction.

Analysis of the vhoGAC and vhtGAC operons from Methanosarcina mazei strain Gö1, both encoding a membrane-bound hydrogenase and a cytochrome b

DNA encompassing the structural genes of two membrane-bound hydrogenases from Methanosarcina mazei Gö1 was cloned and sequenced. The genes, arranged in the order vhoG and vhoA as well as vhtG and vhtA, were identified as those encoding the small and the large subunits of the NiFe hydrogenases [Deppenmeier, U., Blaut, M., Schmidt, B. & Gottschalk, G. (1992) Arch. Microbiol. 157, 505-511]. Northern-blot analysis revealed that the structural genes formed part of two operons, both containing one additional open reading frame (vhoC and vhtC) which codes for a cytochrome b. This conclusion was drawn from the homology of the deduced N-terminal amino acid sequences of vhoC and vhtC and the N-terminus of a 27-kDa cytochrome isolated from Ms. mazei C16. VhoC and VhtC contain four tentative hydrophobic segments which might span the cytoplasmic membrane. Hydropathy plots suggest that His23 and His50 are involved in heme coordination. The comparison of the sequencing data of vhoG and vhtG with the experimentally determined N-terminus of the small subunit indicate the presence of a 48-amino-acid leader peptide in front of the polypeptides. VhoA and VhtA contained the conserved sequence DPCXXC in the C-terminal region, which excludes the presence of a selenocysteine residue in these hydrogenases. Promoter sequences were found upstream of vhoG and vhtG, respectively. Downstream of vhoC, a putative terminator sequence was identified. Alignments of the deduced amino acid sequences of the gene clusters vhoGAC and vhtGAC showed 92-97% identity. Only the C-termini of VhoC and VhtC were not similar.

Sporulation and primary sigma factor homologous genes in Clostridium acetobutylicum

Using a PCR-based approach, we have cloned various sigma factor homologous genes from Clostridium acetobutylicum DSM 792. The nucleotide sequence of the dnaE-sigA operon has been determined and predicts two genes encoding 69- and 43-kDa proteins. The deduced DnaE amino acid sequence has approximately 30% amino acid identity with protein sequences of other primases. The putative sigA gene product shows high homology to primary sigma factors of various bacteria, most significantly to Bacillus subtilis and Staphylococcus aureus. Northern (RNA) blot analysis revealed that both genes from an operon, which is clearly expressed under conditions that allow for cell division. A promoter sequence with significant homology to the sigma H-dependent Bacillus promoters preceded the determined transcriptional start point, 182 bp upstream of the GUG start codon of dnaE. The homologous genes to Bacillus spp. sporulation sigma factors G, E, and K have been cloned and sequenced. Indirect evidence for the existence of sigma F was obtained by identification of a DNA sequence homologous to the respective Bacillus consensus promoter. Southern hybridization analysis indicated the presence of sigma D and sigma H homologous genes in C. acetobutylicum. A new gene group conserved within the eubacteria, but with yet unspecified functions, is described. The data presented here provide strong evidence that at least some of the complex regulation features of sporulation in B. subtilis are conserved in C. acetobutylicum and possibly Clostridium spp.

Synthesis of heat shock proteins in Thermoanaerobacterium thermosulfurigenes EM1 (Clostridium thermosulfurogenes EM1)

The response to heat stress was examined in Thermoanaerobacterium thermosulfurigenes EM1. Upon a temperature shift-up from 50 degrees to 62 degrees C, four heat shock proteins (hsps) were synthesized at an elevated level. Two proteins were found to be immunologically related to the Escherichia coli GroEL protein and the Mycobacterium tuberculosis hsp71 (DnaK similar protein), and the corresponding groE and dnaK homologous sequences were detected in the chromosome of T. thermosulfurigenes EM1. The heat shock response in this thermophile was transient, with a maximum synthesis of hsps between 10 and 15 min after the shock. The enhanced synthesis of DnaK and GroEL was consistent with increased mRNA levels of the genes, which reached a maximum 15 min after heat treatment.

Analysis of Tn916-induced mutants of Clostridium acetobutylicum altered in solventogenesis and sporulation

The conjugative transposon Tn916 was used for mutagenesis of Clostridium acetobutylicum ATCC 824. Tetracycline-resistant mutants were screened for loss of granulose synthesis and five classes of granulose mutants, that contained single transposon insertions, were identified on the basis of altered solvent production. Class 1 mutants did not make acetone or butanol, lacked activity of enzymes induced during solventogenesis, and did not sporulate, indicating that they are regulatory mutants. The class 2 mutant strains also did not produce acetone but did form small amounts of butanol and ethanol, while the class 3 mutants produced low amounts of all solvents. Class 4 and 5 mutants produced essentially the same or higher amounts of solvents than the parent strain. Transposon insertions in the class 1 mutants were used as markers for in vitro synthesis of flanking chromosomal DNA using Tn916-specific primers. The DNA fragments were labeled to produce specific probes. Transposon insertion sites in the chromosomes of 13 different class 1 regulatory mutants were compared by hybridization of the specific probes to Southern blots of restriction endonuclease-digested parental chromosomal DNA. Insertions in two mutants appeared to be in the same region of the chromosome. These results predict that multiple regulatory elements are required to induce solvent production and sporulation.

Pullulanase of Thermoanaerobacterium thermosulfurigenes EM1 (Clostridium thermosulfurogenes): molecular analysis of the gene, composite structure of the enzyme, and a common model for its attachment to the cell surface

The complete pullulanase gene (amyB) from Thermoanaerobacterium thermosulfurigenes EM1 was cloned in Escherichia coli, and the nucleotide sequence was determined. The reading frame of amyB consisted of 5,586 bp encoding an exceptionally large enzyme of 205,991 Da. Sequence analysis revealed a composite structure of the pullulanase consisting of catalytic and noncatalytic domains. The N-terminal half of the protein contained a leader peptide of 35 amino acid residues and the catalytic domain, which included the four consensus regions of amylases. Comparison of the consensus regions of several pullulanases suggested that enzymes like pullulanase type II from T. thermosulfurigenes EM1 which hydrolyze alpha-1,4- and alpha-1,6-glycosidic linkages have specific amino acid sequences in the consensus regions. These are different from those of pullulanases type I which only cleave alpha-1,6 linkages. The C-terminal half, which is not necessary for enzymatic function, consisted of at least two different segments. One segment of about 70 kDa contained two copies of a fibronectin type III-like domain and was followed by a linker region rich in glycine, serine, and threonine residues. At the C terminus, we found three repeats of about 50 amino acids which are also present at the N-termini of surface layer (S-layer) proteins of, e.g., Thermus thermophilus and Acetogenium kivui. Since the pullulanase of T. thermosulfurigenes EM1 is known to be cell bound, our results suggest that this segment serves as an S-layer anchor to keep the pullulanase attached to the cell surface. Thus, a general model for the attachment of extracellular enzymes to the cell surface is proposed which assigns the S-layer a new function and might be widespread among bacteria with S-layers. The triplicated S-layer-like segment is present in several enzymes of different bacteria. Upstream of amyB, another open reading frame, coding for a hypothetical protein of 35.6 kDa, was identified. No significant similarity to other sequences available in DNA and protein data bases was found.

Electro-transformation of Clostridium beijerinckii NRRL B-592 with shuttle plasmid pHR106 and recombinant derivatives

Conditions for transformation of the solventogenic anaerobe Clostridium beijerinckii NRRL B-592 with plasmid DNA via electroporation are described. Shuttle plasmid pHR106 and two derivatives constructed in this study were transferred and were expressed in this organism. One recombinant derivative of pHR106 was constructed by separately subcloning the clostridial tetracycline (tetP) resistance genes into pHR106. The second vector conferring erythromycin resistance was obtained via in-vivo recombination. The new constructs, termed pRZL and pRZE respectively, were then transferred to C. beijerinckii in order to evaluate their potential as shuttle vectors. The recombinant plasmids were shown to transfer to C. beijerinckii and were expressed as autonomously replicating vectors. The use of these plasmids as cloning and shuttle vectors for C. beijerinckii is discussed.

Transposon mutagenesis of Clostridium acetobutylicum P262: isolation and characterization of solvent deficient and metronidazole resistant mutants

An efficient transposon mutagenesis system using conjugative transposons Tn916 and Tn925::Tn917 was established for Clostridium acetobutylicum P262, an industrial strain which has proved difficult to manipulate genetically. Transposon insertions occurred at several different locations to produce a variety of mutants. An oligosporogenous mutant deficient in acetone and butanol production, and two sporulation-deficient and metronidazole resistant mutants were characterized with respect to differentiation and solvent production. Tn925::Tn917 inserted near a string of adenosine residues and transposon insertion was often multiple.

Isolation of a Degeneration-Resistant Mutant of Clostridium acetobutylicum NCIMB 8052

Unless periodically grown from germinated spores, Clostridium acetobutylicum tends to degenerate (that is, to spontaneously lose the capacity both to produce solvents and to develop into spores). To obtain mutants that are deficient in degeneration, C. acetobutylicum NCIMB 8052 was mated with Enterococcus faecalis BM4110 harboring transposon Tn 1545 . We developed a degeneration resistance assay based on a secondary effect of degeneration, the production of toxic levels of acetic and butyric acids. Erythromycin-resistant transconjugant clones were tested individually for longevity by repeated and timely subculturing. One long-lived mutant, A10, survived 18 ± 3 transfers (mean ± standard deviation; n = 20) before extinction, while the wild type (parental cells) survived 6.6 ± 1.5 transfers ( n = 11). The three-fold difference in longevity is statistically significant. In a batch culture in a rich medium, the wild-type cells degenerated within 24 h after inoculation with 1% of an overnight culture derived from germinated spores. In contrast, A10 cells were able to switch to solventogenesis and to sporulate. In a minimal medium with greater buffering capacity, both cell types produced solvents and spores. Southern blots of Eco RI and Hin dIII restriction digests of A10 chromosomal DNA (but not parental DNA) showed that only one copy of Tn 1545 was inserted into the clostridial chromosome. Our findings are consistent with the hypothesis that there was an alteration at a regulatory locus that was effected by the insertion of the transposon.

Cloning, sequencing, and molecular analysis of the sol operon of Clostridium acetobutylicum, a chromosomal locus involved in solventogenesis

A DNA region of Clostridium acetobutylicum contiguous with the adc operon has been cloned and sequenced. Structural genes encoding the acetoacetyl coenzyme A:acetate/butyrate:coenzyme A transferase (ctfB and ctfA) and an alcohol/aldehyde dehydrogenase (adhE) could be identified. These three genes together with a small open reading frame (ORF) of unknown function (upstream of adhE) formed an operon (sol operon), as shown by mRNA analyses. The complete sol operon was transcriptionally induced or derepressed before the onset of solventogenesis, thus confirming earlier results of Northern hybridizations with a ctfB gene probe (U. Gerischer and P. Dürre, J. Bacteriol. 174:426-433, 1992). Upstream of the sol operon, we identified two putative promoters that were located in regions with possible stem-loop structures formed by several inverted repeats. The distal promoter P1 showed only minor transcription initiation in solventogenic C. acetobutylicum cells but was recognized in Escherichia coli, presumably because of its high similarity to the sigma 70 consensus sequence. The adhE-proximal promoter P2 directed the major transcription start point in solventogenic C. acetobutylicum but was not recognized in E. coli. The clostridial AdhE showed high similarity to a novel family (type III) of alcohol dehydrogenases. Two other ORFs (ORF 5 and ORF 6) were found on the cloned DNA region that showed no significant similarity to sequences in various available data bases. mRNA studies revealed that ORF 5 formed a monocistronic operon and showed increased expression before onset of solventogenesis.

Sequence and molecular characterization of a DNA region encoding a small heat shock protein of Clostridium acetobutylicum

A DNA region of Clostridium acetobutylicum containing a gene (hsp 18) with significant homology to a family of small eukaryotic heat shock proteins was cloned and sequenced. It is the second reported sequence of a low-molecular-weight heat shock protein from gram-positive bacteria and is induced not only by heat shock but also at the onset of solventogenesis, as determined by Northern (RNA) blot analysis, thus confirming the results of an earlier study performed at the protein level (A. Pich, F. Narberhaus, and H. Bahl, Appl. Microbiol. Biotechnol. 33:697-704, 1990). By primer extension analysis, a transcriptional start site was identified 149 bp upstream of hsp18. This site was preceded by a region that exhibits high homology to the consensus promoter sequences of gram-positive bacteria, as well as sigma 70-dependent Escherichia coli. A direct repeat structure was detected in the -35 region. The promoter is located 196 bp from the start of a potential regulatory tRNA(Thr)ACG gene involved in the shift to solventogenesis which is transcribed in the opposite direction. A putative rho-independent transcription termination structure was identified at the 3' end of hsp18.

Possible function of tRNA(Thr)ACG in regulation of solvent formation in Clostridium acetobutylicum

The mutation of Clostridium acetobutylicum mutant AA2, defective in the formation of acetone and butanol, was shown to be caused by a single insertion of Tn916 close to the structural gene thrA, encoding the tRNA(Thr)ACG. The DNA region containing the thrA gene was cloned and sequenced. Start and end points of the transcript were determined by primer extension and S1-mapping analysis. The results obtained were identical to predictions derived from the DNA sequence by various RNA-analysing computer programs. The rarely used ACG codon seems to be confined to genes expressed at the end of the exponential growth phase or involved in uptake or turnover of minor C or N substrates. Evolutionary aspects of this codon selection and a possible translational regulation mechanism are discussed.

Cloning, sequencing, and molecular analysis of the groESL operon of Clostridium acetobutylicum

The groESL operon of Clostridium acetobutylicum was cloned in Escherichia coli by using a gene probe of E. coli groESL. Sequencing of a positively reacting 2.2-kbp HindIII fragment contained in the recombinant plasmid pFN1 and a 2.5-kbp XbaI fragment present in pFN4 revealed that both fragments partially overlapped and together spanned 3,493 bp of the clostridial chromosome. Two complete open reading frames (288 and 1632 bp) were found and identified as the groES- and groEL-homologous genes of C. acetobutylicum, respectively. The 3' end of a third gene (orfZ), which was divergently transcribed, showed no significant homology to other sequences available in the EMBL and GenBank data bases. The length of the groESL-specific mRNA (2.2 kb), a transcription terminator downstream of groEL, and a transcription start site upstream of groES, identified by primer extension analysis, indicated that groES and groEL of C. acetobutylicum are organized in a bicistronic operon. From the transcription start site, the promoter structure 5'-TTGCTA (17 bp) TATTAT that shows high homology to the consensus promoter sequence of gram-positive bacteria as well as E. coli was deduced. Transcription of the groESL operon was strongly heat inducible, and maximum levels of mRNA were detected 15 min after heat shock from 30 to 42 degrees C. An 11-bp inverted repeat, located between promoter and translation start sites of groES and partially identical with similar structures in front of several heat shock genes of other bacteria, may play an important role in the regulation of heat shock gene expression in this organism.

Molecular characterization of the dnaK gene region of Clostridium acetobutylicum, including grpE, dnaJ, and a new heat shock gene

The dnaK gene region of Clostridium acetobutylicum was cloned in Escherichia coli by using the pBluescript SK+ and pUC18 vectors. By using the E. coli dnaK gene as a probe and by in vivo chromosome walking, three positive clones harboring the recombinant plasmids pKG1, pKG2, and pKG3 containing 1.2-kbp HindIII, 3.55-kbp EcoRV, and 1.2-kbp PstI fragments of the chromosome of C. acetobutylicum, respectively, were isolated. The cloned fragments partially overlapped, and together they spanned 4,083 bp of the clostridial genome that were completely sequenced. On one strand, four open reading frames of which the last was obviously truncated were identified. The last three genes showed high homology to the grpE, dnaK, and dnaJ heat shock genes of E. coli, respectively. They were preceded by an open reading frame (orfA) without any homology to sequences available in the EMBL or GenBank data bases. Typical translational start sites could be found in front of all four genes. Northern (RNA) blot analysis revealed transcripts of this region with a maximum length of 5.0 kb. Thus, these genes are probably organized in an operon. A transcription terminator could be found between the dnaK and dnaJ genes. By primer extension analysis, a major heat-inducible transcription start site was identified 49 bases upstream of orfA. This site was preceded by a region (5'-TTGACA[17 bp]TATTTT) that exhibited high homology to the consensus promoter sequences of gram-positive bacteria as well as sigma 70-dependent E. coli. Between this promoter and the initiation codon of orfA, a hairpin-loop structure with a possible regulatory role in the expression of these genes was found. Additional heat-inducible transcription start sites were located 69 bases upstream of orfA and 87 bases upstream of grpE; the corresponding promoter regions showed less similarity to other known promoter sequences. Maximum mRNA levels of this heat shock operon were found about 15 min after a heat shock from 30 to 42 degrees C. Our results indicate that orfA codes for an unknown heat shock protein.

The conjugative transposon Tn925: enhancement of conjugal transfer by tetracycline in Enterococcus faecalis and mobilization of chromosomal genes in Bacillus subtilis and E. faecalis

The effects of tetracycline on transfer of the conjugative, tetracycline-resistance transposon. Tn925, as well as the ability of the transposon to promote the transfer of chromosomal genes was examined in Enterococcus faecalis and Bacillus subtilis. To test for chromosomal transfer, multiply-marked strains of each organism, each carrying a single chromosomal copy of Tn925, were mated on filters with suitable recipient strains, under conditions where transformation and transduction were precluded. In both cases, transfer of a variety of chromosomal genes, at frequencies comparable to the frequency of Tn925 transfer, was detected readily. The presence of Tn925 in one of the members of the mating pair was absolutely required for chromosomal transfer, but transfer of Tn925 did not accompany every chromosomal transfer event. The results were consistent with a mating event resembling a type of cell fusion, allowing for extensive recombination between the genomes of the mating partners. Growth of Tn925-containing donor cells in the presence of tetracycline increased the transfer frequency of Tn925 by about tenfold in E. faecalis, but not in B. subtilis.

Natural transfer of conjugative transposon Tn916 between gram-positive and gram-negative bacteria

The conjugative streptococcal transposon Tn916 was found to transfer naturally between a variety of gram-positive and gram-negative eubacteria. Enterococcus faecalis hosting the transposon could serve as a donor for Alcaligenes eutrophus, Citrobacter freundii, and Escherichia coli at frequencies of 10(-6) to 10(-8). No transfer was observed with several phototrophic species. Mating of an E. coli strain carrying Tn916 yielded transconjugants with Bacillus subtilis, Clostridium acetobutylicum, Enterococcus faecalis, and Streptococcus lactis subsp. diacetylactis at frequencies of 10(-4) to 10(-6). Acetobacterium woodii was the only gram-positive organism tested that did not accept the transposon from a gram-negative donor. The results prove the ability of conjugative transposable elements such as Tn916 for natural cross-species gene transfer, thus potentially contributing to bacterial evolution.

Cloning, sequencing, and molecular analysis of the acetoacetate decarboxylase gene region from Clostridium acetobutylicum

Acetoacetate decarboxylase (ADC) (EC4.1.1.4) of Clostridium acetobutylicum DSM 792 was purified to homogeneity, and its first 25 N-terminal amino acids were determined. Oligonucleotide probes deduced from this sequence were used to detect positive clones in partial gene banks derived from Sau3A and HaeIII digests with following ligation into the vector pUC9. In Escherichia coli, the 2.1-kbp HaeIII clones expressed high levels of ADC activity. The expression was independent of the orientation of the insert with respect to the lac promoter of the vector and also of the addition of isopropyl-beta-D-thiogalactopyranoside, thus indicating that sequences located on the clostridial DNA controlled transcription and translation. From the E. coli clone with the recombinant plasmid pUG93 containing the 2.1-kbp HaeIII fragment, the ADC protein was purified and compared with the native enzyme. Both were indistinguishable with respect to the molecular mass of subunits and native protein as well as to activity stain. The 2.9-kbp Sau3A fragment could be shown to contain the amino terminus of the acetoacetate decarboxylase (adc) gene but did not express enzyme activity. It partially overlapped with the HaeIII fragment, spanning together 4,053 bp of the clostridial genome that were completely sequenced. Four open reading frames (ORFs) could be detected, one of which was unambiguously assigned to the acetoacetate decarboxylase (adc) gene. Amino acid sequences of the N terminus and the catalytic center as deduced from the nucleotide sequence were identical to sequences obtained from direct analysis of the protein. Typical procaryotic transcriptional and translational start and stop signals could be found in the DNA sequence. Together with these regulatory sequences, the adc gene formed a single operon. The carboxyl terminus of the enzyme proved to be rather hydrophobic. In vitro transcription-translation assays resulted in formation of ADC and ORF3 gene product; the other two ORFs were not expressed. Whereas no homology of the adc gene and ORF2 could be detected with sequences available in the EMBL or GenBank data bases, the obviously truncated ORF1 showed significant similarity to alpha-amylase of Bacillus subtilis. The restriction pattern and N-terminal amino acid sequence (as deduced from the nucleotide sequence) of ORF3 proved to be identical to those of the large subunit of acetoacetyl coenzyme A:acetate/butyrate:coenzyme A transferase.

Transfer and expression of the tetracycline resistance transposon Tn925 in Acetobacterium woodii

The Enterococcus faecalis conjugative plasmid pCF10 was used to introduce Tn925 into Acetobacterium woodii by filter mating. Tetracycline resistance was transferred at frequencies of about 10(-6) per donor, but no plasmid DNA was found in the transconjugants. DNA hybridization analyses of HindIII-digested chromosomal DNA demonstrated the insertion of Tn925 at a variety of locations, whereas wild type DNA showed no hybridization at all. The transconjugants were used as donor in mating experiments with tetracycline-sensitive Bacillus subtilis. Transfer of tetracycline resistance was observed at frequencies of 10(-8) per recipient.

Recent advances in the genetics of the clostridia

Several laboratories around the world have started work on genetic analysis of clostridia. Interest in this diverse group of anaerobic organisms has grown with increasing awareness of the benefits that may accrue from their biotechnological exploitation. Research to date has focussed on construction of shuttle vectors containing replicons from clostridial and streptococcal plasmids, development of methods for transferring genes, and molecular cloning of genes--especially those involved in toxigenicity, fermentative metabolism and polysaccharide utilization. In selected species gene transfer by protoplast transformation, electroporation and conjugation has been accomplished and transposable elements have been introduced. It can be anticipated that our understanding of the molecular biology of these interesting organisms will grow rapidly in the future, bringing with it improved prospects for rational biotechnological exploitation.

Transfer of Tn1545 and Tn916 to Clostridium acetobutylicum

Tn1545, a conjugative transposon originally discovered in Streptococcus pneumoniae, has been transferred from Enterococcus faecalis and Bacillus subtilis to Clostridium acetobutylicum NCIB 8052. Transfer between different strains of C. acetobutylicum has also been observed. Insertion of Tn1545 into the C. acetobutylicum chromosome occurred at multiple sites, as shown by Southern hybridization. Although ermAM (erythromycin-resistance) was the most satisfactory marker for primary selection of transconjugants, all three Tn1545-encoded antibiotic resistance genes (aphA-3, ermAM, and tetM) were apparently expressed in C. acetobutylicum. Our results indicate that Tn1545 is potentially useful for undertaking mutagenesis and mutational cloning in this industrially important organism. Transfer of another conjugative transposon, Tn916, from E. faecalis to C. acetobutylicum NCIB 8052 was also apparently detected. Circumstantial evidence suggests that there may be a hot spot for Tn916 insertion in the C. acetobutylicum NCIB 8052 chromosome.