Crystallization behavior of predominantly syndiotactic poly(β-hydroxybutyrate)

Effect of Monomers of 3-Hydroxyhexanoate on Properties of Copolymers Poly(3-Hydroxybutyrate-co 3-Hydroxyhexanoate)

The properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) P(3HB-co-3HHx) copolymers with different ratios of monomers synthesized by the wild-type strain Cupriavidus necator B-10646 on sugars, and an industrial sample from Kaneka synthesized by the recombinant strain C. necator NSDG-ΔfadB1 on soybean oil, were studied in a comparative aspect and in relation to poly(3-hydroxybutyrate) P(3HB). The copolymer samples, regardless of the synthesis conditions or the ratio of monomers, had reduced values of crystallinity degree (50-60%) and weight average molecular weight (415-520 kDa), and increased values of polydispersity (2.8-4.3) compared to P(3HB) (70-76%, 720 kDa, and 2.2). The industrial sample had differences in its thermal behavior, including a lower glass transition temperature (-2.4 °C), two peaks in its crystallization and melting regions, a lower melting point (T_melt) (112/141 °C), and a more pronounced gap between T_melt and the temperature of thermal degradation (T_degr). The process, shape, and size of the spherulites formed during the isothermal crystallization of P(3HB) and P(3HB-co-3HHx) were generally similar, but differed in the maximum growth rate of the spherulites during exothermic crystallization, which was 3.5-3.7 μm/min for P(3HB), and 0.06-1.25 for the P(3HB-co-3HHx) samples. The results from studying the thermal properties and the crystallization mechanism of P(3HB-co-3HHx) copolymers are important for improving the technologies for processing polymer products from melts.

Crystallization of microbial polyhydroxyalkanoates: A review

Polyhydroxyalkanoates (PHAs), produced by the microbial fermentation, is a promising green polymer and has attracted much attention due to its excellent biocompatibility, complete biodegradability, and non-cytotoxicity. The physical properties of PHAs are closely related to their chemical and crystalline structure. Therefore, deep understanding and regulating the structure and crystallization of PHAs are the key factors to improve the performance of PHAs. This review first provides a brief overview of the development history, chemical structure, and basic properties of PHAs. Then, the crystal structure, crystal morphology, kinetics theories and crystallization behavior of nucleation-induced PHAs are systematically summarized to provide a theoretical foundation for improving PHAs crystallization rate and physical properties. In the end, the outlook on the crystallization and application prospects of PHAs is also addressed.

Determining paracrystallinity in mixed-tacticity polyhydroxybutyrates

A method to robustly determine paracrystalline contents from Rietveld-refined powder X-ray data is presented and discussed for the example of mixed-tacticity polyhydroxybutyrates.

Recently, the authors reported on the development of crystallinity in mixed-tacticity polyhydroxybutyrates. Comparable values reported in the literature vary depending on the manner of determination, the discrepancies being partially attributable to scattering from paracrystalline portions of the material. These portions can be qualified by peak profile fitting or quantified by allocation of scattered X-ray intensities. However, the latter requires a good quality of the former, which in turn must additionally account for peak broadening inherent in the measurement setup, and due to limited crystallite sizes and the possible presence of microstrain. Since broadening due to microstrain and paracrystalline order both scale with scattering vector, they are easily confounded. In this work, a method to directionally discern these two influences on the peak shape in a Rietveld refinement is presented. Allocating intensities to amorphous, bulk and paracrystalline portions with changing tactic disturbance provided internal validations of the obtained directional numbers. In addition, the correlation between obtained thermal factors and Young’s moduli, determined in earlier work, is discussed.

The Effect of a Secondary Process on the Analysis of Isothermal Crystallisation Kinetics by Differential Scanning Calorimetry

This paper demonstrates the application of a modified Avrami equation in the analysis of crystallisation curves obtained using differential scanning calorimetry (DSC). The model incorporates a square root of time dependence of the secondary process into the conventional Avrami equation and, although previously validated using laser flash analysis and infrared spectroscopy, is not currently transferable to DSC. Application of the model to calorimetric data required long-duration isotherms and a series of data treatments. Once implemented, the square root of time dependence of the secondary process was once again observed. After separation of the secondary process from the primary, a mechanistic n value of 3 was obtained for the primary process. Kinetic parameters obtained from the analysis were used in the model to regenerate the fractional crystallinity curves. Comparison of the model with experimental data generated R² values in excess of 0.995. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was used as model polymer due to the prominent secondary crystallisation behaviour that this polymer is known to display.

Stereoselective Ring-Opening (Co)polymerization of β-Butyrolactone and ε-Decalactone Using an Yttrium Bis(phenolate) Catalytic System

An effective route for ring-opening copolymerization of β-butyrolactone (BBL) with ε-decalactone (ε-DL) is reported. Microstructures of the block copolymers characterized by 13C NMR spectroscopy revealed syndiotactic-enriched poly(3-hydroxybutyrate) (PHB) blocks. Several di- and triblock copolymers (PDL-b-PHB and PDL-b-PHB-b-PDL, respectively) were successfully synthesized by sequential addition of the monomers using (salan)Y(III) complexes as catalysts. The results from MALDI-ToF mass spectrometry confirmed the presence of the copolymers. Moreover, thermal properties of the block copolymers were also investigated and showed that the microphase separation of PDL-b-PHB copolymers into PHB- and PDL-rich domains has an impact on the glass transition temperatures of both blocks.

Biodegradable nanoparticles of amphiphilic triblock copolymers based on poly(3-hydroxybutyrate) and poly(ethylene glycol) as drug carriers

New amorphous amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were synthesized using the ring-opening copolymerization of beta-butyrolactone monomer. They were characterized by fluorescence, SEM and (1)H NMR. These triblock copolymers can form biodegradable nanoparticles with core-shell structure in aqueous solution. Comparing to the poly(ethylene oxide)-PHB-poly(ethylene oxide) (PEO-PHB-PEO) copolymers, these nanoparticles exhibited much smaller critical micelle concentrations and better drug loading properties, which indicated that the nanoparticles were very suitable for delivery carriers of hydrophobic drugs. The drug release profile monitored by fluorescence showed that the release of pyrene from the PHB-PEG-PHB nanoparticles exhibited the second-order exponential decay behavior. The initial biodegradation rate of the PHB-PEG-PHB nanoparticles was related to the enzyme amount, the initial concentrations of nanoparticle dispersions and the PHB block length. The biodegraded products detected by (1)H NMR contained 3HB monomer, dimer and minor trimer, which were safe to the body.