Silicon-based microelectrodes for neurophysiology, micromachined from silicon-on-insulator wafers

An Algorithm for Tracking the Position and Velocity of Multiple Neuronal Signals Using Implantable Microelectrodes In Vivo

Increasingly complex multi-electrode arrays for the study of neurons both in vitro and in vivo have been developed with the aim of tracking the conduction of neural action potentials across a complex interconnected network. This is usually performed through the use of electrodes to record from single or small groups of microelectrodes, and using only one electrode to monitor an action potential at any given time. More complex high-density electrode structures (with thousands of electrodes or more) capable of tracking action potential propagation have been developed but are not widely available. We have developed an algorithm taking data from clusters of electrodes positioned such that action potentials are detected by multiple sites, and using this to detect the location and velocity of action potentials from multiple neurons. The system has been tested by analyzing recordings from probes implanted into the locust nervous system, where recorded positions and velocities correlate well with the known physical form of the nerve.

Microengineered neural probes for in vivo recording

One of the great challenges facing medicine is the repair of the damaged nervous system. Due to the limited capacity of the central (and to a lesser extent the peripheral) nervous systems to regenerate, damage such as spinal cord injury can often result in permanent paralysis. Researchers are attempting to overcome nerve injury by devising methods of sensing neural activity either in the brain or in the spinal cord or peripheral nervous system. This information can act as a control mechanism for either muscle stimulators (e.g. for restoring limb function) or providing function in some other way (such as controlling a cursor on a computer screen). Ideally, sensing devices are implanted into the body, directly accessing the nervous system. Whilst great advancements have been made in implantable neural stimulators, sensing of neural activity has proven to be a more difficult task. This chapter describes how microengineered probes allow construction of neuron-sized neural interfaces for enhanced recording in vivo.

NeuroMEMS: Neural Probe Microtechnologies

Neural probe technologies have already had a significant positive effect on our understanding of the brain by revealing the functioning of networks of biological neurons. Probes are implanted in different areas of the brain to record and/or stimulate specific sites in the brain. Neural probes are currently used in many clinical settings for diagnosis of brain diseases such as seizers, epilepsy, migraine, Alzheimer's, and dementia. We find these devices assisting paralyzed patients by allowing them to operate computers or robots using their neural activity. In recent years, probe technologies were assisted by rapid advancements in microfabrication and microelectronic technologies and thus are enabling highly functional and robust neural probes which are opening new and exciting avenues in neural sciences and brain machine interfaces. With a wide variety of probes that have been designed, fabricated, and tested to date, this review aims to provide an overview of the advances and recent progress in the microfabrication techniques of neural probes. In addition, we aim to highlight the challenges faced in developing and implementing ultra-long multi-site recording probes that are needed to monitor neural activity from deeper regions in the brain. Finally, we review techniques that can improve the biocompatibility of the neural probes to minimize the immune response and encourage neural growth around the electrodes for long term implantation studies.

Protein adsorption on materials for recording sites on implantable microelectrodes

Implantable microelectrodes have the potential to become part of neural prostheses to restore lost nerve function after nerve damage. The initial adsorption of proteins to materials for implantable microelectrodes is an important factor in determining the longevity and stability of the implant. Once an implant is in the body, protein adsorption takes place almost instantly before the cells reach the surface of an implant. The aim of this study was to identify an optimum material for electrode recording sites on implantable microelectrodes. Common materials for electrode sites are gold, platinum, iridium, and indium tin oxide. These, along with a reference material (titanium), were investigated. The thickness and the structure of adsorbed proteins on these materials were measured using a combination of atomic force microscopy and ellipsometry. The adsorbed protein layers on gold (after 7 and 28 days of exposure to serum) were the smoothest and the thinnest compared to all the other substrate materials, indicating that gold is the material of choice for electrode recording sites on implantable microelectrodes. However, the results also show that indium tin oxide might also be a good choice for these applications.

Polytrodes: High-Density Silicon Electrode Arrays for Large-Scale Multiunit Recording

We developed a variety of 54-channel high-density silicon electrode arrays (polytrodes) designed to record from large numbers of neurons spanning millimeters of brain. In cat visual cortex, it was possible to make simultaneous recordings from >100 well-isolated neurons. Using standard clustering methods, polytrodes provide a quality of single-unit isolation that surpasses that attainable with tetrodes. Guidelines for successful in vivo recording and precise electrode positioning are described. We also describe a high-bandwidth continuous data-acquisition system designed specifically for polytrodes and an automated impedance meter for testing polytrode site integrity. Despite having smaller interconnect pitches than earlier silicon-based electrodes of this type, these polytrodes have negligible channel crosstalk, comparable reliability, and low site impedances and are capable of making high-fidelity multiunit recordings with minimal tissue damage. The relatively benign nature of planar electrode arrays is evident both histologically and in experiments where the polytrode was repeatedly advanced and retracted hundreds of microns over periods of many hours. It was possible to maintain stable recordings from active neurons adjacent to the polytrode without change in their absolute positions, neurophysiological or receptive field properties.

Evaluation of MEMS materials of construction for implantable medical devices

Medical devices based on microelectro-mechanical systems (MEMS) platforms are currently being proposed for a wide variety of implantable applications. However, biocompatibility data for typical MEMS materials of construction and processing, obtained from standard tests currently recognized by regulatory agencies, has not been published. Likewise, the effects of common sterilization techniques on MEMS material properties have not been reported. Medical device regulatory requirements dictate that materials that are biocompatibility tested be processed and sterilized in a manner equivalent to the final production device. Material, processing, and sterilization method can impact the final result. Six candidate materials for implantable MEMS devices, and one encapsulating material, were fabricated using typical MEMS processing techniques and sterilized. All seven materials were evaluated using a baseline battery of ISO 10993 physicochemical and biocompatibility tests. In addition, samples of these materials were evaluated using a scanning electron microscope (SEM) pre- and post-sterilization. While not addressing all facets of ISO 10993 testing, the biocompatibility and SEM data indicate few concerns about use of these materials in implant applications.

Instrumentation to evaluate neural signal recording properties of micromachined microelectrodes inserted in invertebrate nerve

The design and characterization of instrumentation for application in evaluating the neural signal recording properties of probe-type microelectrodes, micromachined from silicon, are reported. Key aspects include the close matching of gain and frequency response between channels (better than 1%), flexibility in signal conditioning options, the ability to operate with a wide range of (microelectrode) recording site dimensions (4 microm x 4 micrm to 50 microm x 50 microm), and hence impedances, and the facility to monitor and store instrumentation settings on computer along with the recorded signals. Noise levels ranged from 3.7 microV rms for a 50 microm site, to 11.7 microV rms for a microm site, measured in saline. Close matching between channels was required to enable comparisons between different sites and different probes to be made with confidence; however, the instrumentation could be readily applied to less demanding applications.