Flow-through partial-filling affinity capillary electrophoresis for the estimation of binding constants of ligands to receptors

Application of affinity capillary electrophoresis for charge heterogeneity profiling of biopharmaceuticals

Charge heterogeneity profiling is important for the quality control (QC) of biopharmaceuticals. Because of the increasing complexity of these therapeutic entities [1], the development of alternative analytical techniques is needed. In this work, flow-through partial-filling affinity capillary electrophoresis (FTPFACE) has been established as a method for the analysis of a mixture of two similar monoclonal antibodies (mAbs). The addition of a specific ligand results in the complexation of one mAb in the co-formulation, thus changing its migration time in the electric field. This allows the characterization of the charged variants of the non-shifted mAb without interferences. Adsorption of proteins to the inner capillary wall has been circumvented by rinsing with guanidine hydrochloride before each injection. The presented FTPFACE approach requires only very small amounts of ligands and provides complete comparability with a standard CZE of a single mAb.

Taking Advantage of Electric Field Induced Bacterial Aggregation for the Study of Interactions between Bacteria and Macromolecules by Capillary Electrophoresis

The quantification of interaction stoichiometry and binding constant between bacteria (or other microorganism) and (macro)molecules remains a challenging issue for which only a few adapted methods are available. In this paper, a new methodology was developed for the determination of the interaction stoichiometry and binding constant between bacteria and (macro)molecules. The originality of this work is to take advantage of the bacterial aggregation phenomenon to directly quantify the free ligand concentration in equilibrated bacteria-ligand mixtures using frontal analysis continuous capillary electrophoresis. The described methodology does not require any sample preparation such as filtration step or centrifugation. It was applied to the study of interactions between Erwinia carotovora and different generations of dendrigraft poly-L-lysines leading to quantitative information (i.e., stoichiometry and binding site constant). High stoichiometries in the order of 10(6)-10(7) were determined between nanometric dendrimer-like ligands and the rod-shaped micrometric bacteria. The effect of the dendrimer generation on the binding constant and the stoichiometry is discussed. Stoichiometries were compared with those obtained by replacing the bacteria by polystyrene microbeads to demonstrate the internalization of the ligands inside the bacteria and the increase of the specific surface via the formation of vesicles.

On-column ligand/receptor derivatization coupled to affinity capillary electrophoresis

The coupling of on-column derivatization of small molecules to affinity capillary electrophoresis (ACE) has only been realized during the past 5 yr. In this technique, multiple zones of reagent(s) and ligand or receptor are injected into the capillary column. Upon electrophoresis, zones of sample overlap, yielding product. Continued electrophoresis results in the product overlapping with receptor (or ligand, if the receptor was derivatized), thereby causing a shift in migration time of the compound in question. Subsequent Scatchard analysis using noninteracting standards realizes a binding constant. Herein, we describe the use of on-column-ligand and receptor derivatization coupled to partial-filling ACE (PFACE) to probe the binding of vancomycin (Van) from Streptomyces orientalis and teicoplanin (Teic) from Actinoplanes teicomyceticus to D-Ala-D-Ala terminus peptides.

Implementation of chemometric methodology in ACE: Predictive investigation of protein–ligand binding

An ACE predictive investigation of protein-ligand binding using a highly effective chemometric response surface design technique is presented. Here, K(d) was estimated using one noninteracting standard which relates to changes in the electrophoretic mobility of carbonic anhydrase B (CAB, EC 4.2.1.1) on complexation with the ligand 4-carboxybenzenesulfonamide (CBSA) present in the electrophoresis buffer. Experimental factors including injection time, capillary length, and applied voltage were selected and tested at three levels in a Box-Behnken design. Statistical analysis results were used to create a mathematical model for response surface prediction via contour and surface plots at a given target response (K(d) = 1.19x10(-6) M). As expected, there were a number of predicted solutions that reached our target response based on the significance of each factor at appropriate levels. The adequacy of the model was validated by experimental runs with the predicted model solution (capillary length = 47 cm, voltage = 11 kV, injection time = 0.01 min) presented in detail as an example.

On-column synthesis coupled to affinity capillary electrophoresis for the determination of binding constants of peptides to glycopeptide antibiotics

Binding constants of the glycopeptide antibiotics teicoplanin (Teic), ristocetin (Rist), and vancomycin (Van), and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column ligand and receptor synthesis coupled to affinity capillary electrophoresis (ACE) or partial filling ACE (PFACE). In the first technique, 9-fluorenylmethoxycarbonyl (Fmoc)-amino acid-D-Ala-D-Ala species are first synthesized using on-column techniques. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and buffer, respectively. Upon electrophoresis, the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the glycopeptide in the running buffer and the plug of Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Subsequent analysis of the change in the electrophoretic mobility (mu) or relative migration time ratio (RMTR) of the peptide relative to the non-interacting standards, as a function of the concentration of the antibiotic, yields a value for the binding constant. In the second technique, derivatives of the glycopeptides Teic and Rist are first synthesized on-column before analysis by ACE or PFACE. After the column has been partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides, a plug of buffer followed by two separate plugs of reagents are injected. The order of the reagent plugs containing the antibiotic and two non-interacting standards and the anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in RMTR of the new glycopeptide relative to the non-interacting standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant.

(Micellar) electrokinetic chromatography: an interesting solution for the liquid phase separation dilemma

High-performance liquid chromatography (HPLC) is a well-established method in modern analysis. The method is simple, very robust and is applicable to the majority of components to be analyzed in contrast to gas chromatography. Low efficiency and small peak capacity are sore points of HPLC when complex mixtures have to be separated. The reason for this dilemma is the small diffusion coefficient of the analytes in the liquid mobile phase compared to a gaseous phase. This review, complemented by exemplary calculated data and some latest results of our own research, illustrates the dilemma of liquid phase chromatography to achieve high efficiencies under reasonable conditions. It is shown that (micellar) electrokinetic chromatography, offering fast and efficient separations, is a very promising solution for this dilemma. Additional features of this method are possibilities of on-line analyte concentration, coupling to mass spectrometry and the easy change of selectivities by applying various separation additives. The pros and cons of electrokinetic chromatography are pointed out and some application examples are given.

Evaluation of molecule-microbe interactions with capillary electrophoresis: procedures, utility and restrictions

Understanding the interactions between molecules and living organisms is of paramount importance for the evaluation of pharmaceutical activity, chemical toxicity and all manner of microbiological studies. The capability of capillary electrophoresis (CE) in the evaluation of molecule-microbe interactions is examined in the present paper. The fundamental chemical concept of the binding or association constant for molecular systems measured in free solution is discussed for biological systems where microorganisms uptake or associate with molecules from their environment. The heterogeneity of the living organisms must be understood and accounted for including differences related to semantics such as concentration units and the nature of the associations between two entities and large differences in the size and number of microorganisms as compared to molecules. Finally, the added complexity and even inhomogeneity of a cell compared to most molecular systems must be considered and possibly controlled. The binding of specific molecules to viruses is discussed. CE can be utilized to quickly determine if a molecule binds very strongly or not at all to a cell (i.e., a binary yes/no answer). This could be useful for initial high-throughput screening purposes when using capillary arrays, for example. CE can be useful for determining unusual (large) molecule/microbe stoichiometries. Finally, CE can sometimes be used to determine the size of binding constants (K(RL)) within certain limits provided experimental conditions can be formulated that minimize problems of biological heterogeneity.

Use of bioaffinity interactions in electrokinetically controlled assays on microfabricated devices

In this contribution, the role of bioaffinity interactions on electrokinetically controlled microfabricated devices is reviewed. Interesting applications reported in the literature include enzymatic assays, where enzyme and enzyme inhibition kinetics were studied, often in combination with electrophoretic separation. Attention is paid towards developments that could lead to implementation of electrokinetically controlled microdevices in high-throughput screening. Furthermore, enzyme-facilitated detection in combination with electrophoretic separation on microdevices is discussed. Various types of immunoassays have been implemented on the microchip format. The selectivity of antibody-antigen interaction has been exploited for the detection of analytes in complex sample matrices as required, for example, in clinical chemistry. Binding kinetics as well as stoichiometry were studied in chip-based assays. Automated mixing protocols as well as the demonstration of a parallel immunoassay allow implementation of microdevices in high-throughput screening. Furthermore, demonstration of immunoassays on cheap polymeric microdevices opens the way towards the fabrication of disposable devices, a requirement for commercialization and therefore for application in routine analyses.

Recent advances in capillary electrophoresis of peptides

The article gives a comprehensive review on the recent developments in the applications of high-performance capillary electromigration methods, including zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography, to analysis, preparation and physicochemical characterization of peptides. The article presents new approaches to the theoretical description and experimental verification of electromigration behavior of peptides, and covers the methodological aspects of capillary electroseparations of peptides, such as strategy and rules for the rational selection of separation mode and experimental conditions, sample treatment, suppression of peptide adsorption to the inner capillary wall, new developments in individual separation modes and new designs of detection systems. Several types of applications of capillary electromigration methods to peptide analysis are presented: conventional qualitative and quantitative analysis for determination of purity, determination in biomatrices, monitoring of physical and chemical changes and enzymatic conversions, amino acid and sequence analysis and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of capillary electromigration techniques to provide important physicochemical characteristics of peptides are demonstrated.

On-column ligand synthesis coupled to partial-filling affinity capillary electrophoresis to estimate binding constants of ligands to a receptor

This paper describes a two-step procedure whereby on-column ligand synthesis and partial-filling affinity capillary electrophoresis (PFACE) are sequentially coupled to each other to determine the binding constants of 9-fluorenylmethoxy carbonyl (Fmoc)-amino acid-D-Ala-D-Ala species to vancomycin (Van) from Streptomyces orientalis. In this technique four separate plugs of sample are injected onto the capillary column and electrophoresed. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and running buffer, respectively. The fourth sample plug contains an increasing concentration of Van partially-filled onto the capillary column. Upon electrophoresis the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the plugs of Van and Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Analysis of the change in the relative migration time ratio of the Fmoc-amino acid-D-Ala-D-Ala peptide relative to the non-interacting standards, as a function of the concentration of Van, yields a value for the binding constant. These values agree well with those estimated using other binding and ACE techniques.

Methods for the determination of binding constants by capillary electrophoresis

Apparent equilibrium constants for molecular association (e.g., association constants, binding constants, dissociation constants, partition coefficients) can be determined with a variety of different capillary electrophoresis (CE) approaches. In many cases, the investigated association behavior is between a smaller molecule or ion (i.e., the solute, drug, or analyte of interest) and a larger entity (e.g., proteins, micelles, polymers, chiral selectors such as cyclodextrins, etc.). Each experimental approach has advantages and disadvantages. Frequently, it is the nature of the system being evaluated that determines the optimal experimental approach. Six different CE-based techniques for evaluating binding constants are reviewed. Examples of each method, and recent references on its use are given.

Recent advances in affinity capillary electrophoresis

Use of the specificity of (bio)interactions can effectively overcome the selectivity limitation faced in capillary electrophoresis (CE), and the resulting technique usually is referred to as affinity capillary electrophoresis (ACE). Despite the high selectivity of ACE, several important problems still need to be addressed. A major issue in all CE separations, including ACE, is the concentration detection limit. Using UV detection, this is usually in the order of 10(-6) M whereas laser-induced fluorescence (LIF) detection can provide detection limits down to the sub-10(-10) M range. However, a marked disadvantage of LIF is that labeling of the analytes is usually required, which might change the interaction behavior of the solutes under investigation. Additionally, labeling reactions at sub-10(-10) M concentration levels are certainly not trivial and often difficult to perform quantitatively. Alternative and universal detection approaches, particularly mass spectrometric (MS) detection, look very promising but (A) CE-MS techniques are still far from routine application. Important future progress in sensitive detection strategies is likely to increase the use of ACE in the future.