Assembly and genetics of spore protective structures

Sporulation, Structure Assembly, and Germination in the Soil Bacterium Bacillus thuringiensis: Survival and Success in the Environment and the Insect Host

Bacillus thuringiensis (Bt) is a rod-shaped, Gram-positive soil bacterium that belongs to the phylum Firmicutes and the genus Bacillus. It is a spore-forming bacterium. During sporulation, it produces a wide range of crystalline proteins that are toxic to different orders of insects. Sporulation, structure assembly, and germination are essential stages in the cell cycle of B. thuringiensis. The majority of studies on these issues have focused on the model organism Bacillus subtilis, followed by Bacillus cereus and Bacillus anthracis. The machinery for sporulation and germination extrapolated to B. thuringiensis. However, in the light of recent findings concerning the role of the sporulation proteins (SPoVS), the germination receptors (Gr), and the cortical enzymes in Bt, the theory strengthened that conservation in sporulation, structure assembly, and germination programs drive the survival and success of B. thuringiensis in the environment and the insect host. In the present minireview, the latter pinpointed and reviewed.

Flow electrochemical inactivation of waterborne bacterial endospores

Waterborne pathogens have the risk of spreading waterborne diseases and even pandemics. Some Gram-positive bacteria can form endospores, the hardiest known life form that can withstand heat, radiation, and chemicals. Electrochemical inactivation may offer a promising solution, but is hindered by low inactivation efficiencies resulting from limitation of electrode/endospores interaction in terms of electrochemical reaction selectivity and mass transfer. Herein, these issues were addressed through modifying selectivity of active species formation using electroactive ceramic membrane with high oxygen evolution potential, improving mass transfer property by flow-through operation. In this way, inactivation (6.0-log) of Bacillus atrophaeus endospores was achieved. Theoretical and experimental results demonstrated synergistic inactivation to occur through fragmentation of coat via interfacial electron transfer and electro-produced transient radicals (•OH primarily, •Cl and Cl₂^•- secondarily), thereby increasing cell permeability to facilitate penetration of electro-produced persistent active chlorine for subsequent rupture of intracellular structures. Numbering-up electrode module strategy was proposed to scale up the system, achieving average 5.3-log inactivation of pathogenic Bacillus anthracis endospores for 30 days. This study demonstrates a proof-of-concept manner for effective inactivation of waterborne bacterial endospores, which may provide an appealing strategy for wide-range applications like water disinfection, bio-safety control and defense against biological warfare.

Stabilizing enzymes by immobilization on bacterial spores: A review of literature

The ever-increasing applications of enzymes are limited by the relatively poor performance in harsh processing conditions. As a result, there are constant innovations in immobilization protocols for improving biocatalyst activity and stability. Bacterial spores are cheap to generate and highly resistant to environmental stress. The spore core is sheathed by an inner membrane, the germ cell wall, the cortex, outer membrane, spore coat and in some species the exosporium. The spore surface is anion-rich, hydrophobic and contains several reactive groups capable of interacting and stabilizing enzyme molecules through electrostatic forces, hydrophobic interactions and covalent bonding. The probiotic nature of spores obtained from non-toxic bacterial species makes them suitable carriers for the enzyme immobilization, especially food-grade enzymes or those intended for therapeutic use. Immobilization on spores is by direct adsorption, covalent attachment or surface display during the sporulation phase. Hindrances to the immobilization on spore matrix include the production rates, operational instability, and reduced catalytic properties due to conformational changes in enzyme. This paper reviews bacterial spore as a heterofunctional support matrix gives reasons why probiotic bacillus spores are better options and the diverse technologies adopted for spore-enzyme immobilization. It further suggests directions for future use and discusses the commercialization prospects.

Petrobactin Protects against Oxidative Stress and Enhances Sporulation Efficiency in Bacillus anthracis Sterne

Bacillus anthracis causes the disease anthrax, which is transmitted via its dormant, spore phase. However, conversion from bacillus to spore is a complex, energetically costly process that requires many nutrients, including iron. B. anthracis requires the siderophore petrobactin to scavenge iron from host environments. We show that, in the Sterne strain, petrobactin is required for efficient sporulation, even when ample iron is available. The petrobactin biosynthesis operon is expressed during sporulation, and petrobactin is biosynthesized during growth in high-iron sporulation medium, but instead of being exported, the petrobactin remains intracellular to protect against oxidative stress and improve sporulation. It is also required for full growth and sporulation in blood (bovine), an essential step for anthrax transmission between mammalian hosts.

Bacillus anthracis is a Gram-positive bacillus that under conditions of environmental stress, such as low nutrients, can convert from a vegetative bacillus to a highly durable spore that enables long-term survival. The sporulation process is regulated by a sequential cascade of dedicated transcription factors but requires key nutrients to complete, one of which is iron. Iron acquisition by the iron-scavenging siderophore petrobactin is required for vegetative growth of B. anthracis under iron-depleted conditions and in the host. However, the extent to which petrobactin is involved in spore formation is unknown. This work shows that efficient in vitro sporulation of B. anthracis requires petrobactin, that the petrobactin biosynthesis operon (asbA to -F) is induced prior to sporulation, and that the siderophore itself associates with spores. Petrobactin is also required for oxidative stress protection during late-stage growth and for wild-type levels of sporulation in sporulation medium. Sporulation in bovine blood was found to be petrobactin dependent. Collectively, the in vitro contributions of petrobactin to sporulation as well as growth imply that petrobactin may be required for B. anthracis transmission via the spore during natural infections, in addition to its key known functions during active anthrax infections.

Progress in Spore Surface Display Technology towards Environment, Vaccine Development, and Biocatalysis

Spore surface display is the most desirable with enhanced effects, low cost, less time consuming and the most promising technology for environmental, medical, and industrial development. Spores have various applications in industry due to their ability to survive in harsh industrial processes including heat resistance, alkaline tolerance, chemical tolerance, easy recovery, and reusability. Yeast and bacteria, including gram-positive and -negative, are the most frequently used organisms for the display of various proteins (eukaryotic and prokaryotic), but unlike spores, they can rupture easily due to nutritive properties, susceptibility to heat, pH, and chemicals. Hence, spores are the best choice to avoid these problems, and they have various applications over nonspore formers due to amenability for laboratory purposes. Various strains of <i>Clostridium</i> and <i>Bacillus</i> are spore formers, but the most suitable choice for display is <i>Bacillus subtilis</i> because, according to the WHO, it is safe to humans and considered as “GRAS” (generally recognized as safe). This review focuses on the application of spore surface display towards industries, vaccine development, the environment, and peptide library construction, with cell surface display for enhanced protein expression and high enzymatic activity. Different vectors, coat proteins, and statistical analyses can be used for linker selection to obtain greater expression and high activity of the displayed protein.

Rhizoremediation of petroleum hydrocarbon, prospects and future

Oil refineries generate several tones of oily waste which is dumped in an open pit within the vicinity of oil field.

Sterilization of hydrogen peroxide resistant bacterial spores with stabilized chlorine dioxide

Bacillus pumilus SAFR-032 spores isolated from a clean room environment are known to exhibit enhanced resistance to peroxide, desiccation, UV radiation and chemical disinfection than other spore-forming bacteria. The survival of B. pumilus SAFR-032 spores to standard clean room sterilization practices requires development of more stringent disinfection agents. Here, we report the effects of a stabilized chlorine dioxide-based biocidal agent against spores of B. pumilus SAFR-032 and Bacillus subtilis ATCC 6051. Viability was determined via CFU measurement after exposure. Chlorine dioxide demonstrated efficacy towards sterilization of spores of B. pumilus SAFR-032 equivalent or better than exposure to hydrogen peroxide. These results indicate efficacy of chlorine dioxide delivered through a stabilized chlorine dioxide product as a means of sterilization of peroxide- and UV-resistant spores.

Water behavior in bacterial spores by deuterium NMR spectroscopy

Dormant bacterial spores are able to survive long periods of time without nutrients, withstand harsh environmental conditions, and germinate into metabolically active bacteria when conditions are favorable. Numerous factors influence this hardiness, including the spore structure and the presence of compounds to protect DNA from damage. It is known that the water content of the spore core plays a role in resistance to degradation, but the exact state of water inside the core is a subject of discussion. Two main theories present themselves: either the water in the spore core is mostly immobile and the core and its components are in a glassy state, or the core is a gel with mobile water around components which themselves have limited mobility. Using deuterium solid-state NMR experiments, we examine the nature of the water in the spore core. Our data show the presence of unbound water, bound water, and deuterated biomolecules that also contain labile deuterons. Deuterium–hydrogen exchange experiments show that most of these deuterons are inaccessible by external water. We believe that these unreachable deuterons are in a chemical bonding state that prevents exchange. Variable-temperature NMR results suggest that the spore core is more rigid than would be expected for a gel-like state. However, our rigid core interpretation may only apply to dried spores whereas a gel core may exist in aqueous suspension. Nonetheless, the gel core, if present, is inaccessible to external water.

Fluorescent and bioluminescent cell-based sensors: strategies for their preservation

Luminescent whole-cell biosensing systems have been developed for a variety of analytes of environmental, clinical, and biological interest. These analytical tools allow for sensitive, rapid, simple, and inexpensive quantitative detection of target analytes. Furthermore, they can be designed to be nonspecific, semispecific, or highly specific/selective. A notable feature of such sensing systems employing living cells is that they provide information on the analyte bioavailability and activity. These characteristics, along with their suitability to miniaturization, make cell-based sensors ideal for field applications. However, a major limitation to on-site use is their "shelf-life." To address this problem, various methods for preservation of sensing cells have been reported, including freeze-drying, immobilization in different types of matrices, and formation of spores. Among these, the use of spores emerged as a promising strategy for long-term storage of whole-cell sensing systems at room temperature as well as in extreme environmental conditions.

Potential use of inhibitors of bacteria spore germination in the prophylactic treatment of anthrax andClostridium difficile-associated disease

Spore germination is the first step in establishing Bacillus and Clostridium infections. Germination is triggered by the binding of small molecules by the resting spore. Subsequently, the activated spore secretes dipicolinic acid and calcium, the spore core is rehydrated and spore structures are degraded. Inhibition of any of the germination-related events will prevent development to the vegetative stage. Inhibition of spore germination has been studied intensively in the prevention of food spoilage. In this perspective, we propose that similar approaches could be used in the prophylactic control of Bacillus anthracis and Clostridium difficile infections. Inhibition of B. anthracis spore germination could protect military and first-line emergency personnel at high risk for anthrax exposure. Inhibition of C. difficile could prevent human C. difficile-associated disease during antibiotic treatment of immunocompromised patients.

The Geobacillus paradox: why is a thermophilic bacterial genus so prevalent on a mesophilic planet?

The genus Geobacillus comprises endospore-forming obligate thermophiles. These bacteria have been isolated from cool soils and even cold ocean sediments in anomalously high numbers, given that the ambient temperatures are significantly below their minimum requirement for growth. Geobacilli are active in environments such as hot plant composts, however, and examination of their genome sequences reveals that they are endowed with a battery of sensors, transporters and enzymes dedicated to hydrolysing plant polysaccharides. Although they appear to be relatively minor members of the plant biomass-degrading microbial community, Geobacillus bacteria have achieved a significant population with a worldwide distribution, probably in large part due to adaptive features of their spores. First, their morphology and resistance properties enable them to be mobilized in the atmosphere and transported long distances. Second, their longevity, which in theory may be extreme, enables them to lie quiescent but viable for long periods of time, accumulating gradually over time to achieve surprisingly high population densities.

A genome-wide transcriptional profiling of sporulating Bacillus subtilis strain lacking PrpE protein phosphatase

The sporulation process is a complex genetic developmental program leading to profound changes in global gene expression profile. In this work, we have applied genome-wide microarray approach for transcriptional profiling of Bacillus subtilis strain lacking a gene coding for PrpE protein phosphatase. This protein was previously shown to be involved in the regulation of germination of B. subtilis spores. Moreover, the deletion of prpE gene resulted in changing the resistance properties of spores. Our results provide genome-wide insight into the influence of this protein phosphatase on the physiology of B. subtilis cells. Although the precise role of PrpE in shaping the observed phenotype of ΔprpE mutant strain still remains beyond the understanding, our experiments brought observations of possible indirect implication of this protein in the regulation of cell motility and chemotaxis, as well as the development of competence. Surprisingly, prpE-deleted cells showed elevated level of general stress response, which turned out to be growth medium specific.

[Overview of study on Bacillus subtilis spores]

This review documents my research for the past 29 years in the work of bacterial sporulation. The Gram-positive bacterium Bacillus subtilis forms spores when conditions are unsuitable for growth. The mature spores remain for long periods of starvation and are resistant to harsh environment. This property is attributed mainly to the unique figures of spore's outer layers, spore coat. The protein composition of the spores was comprehensively analyzed by a combination of SDS-PAGE and LC-MS/MS. The total of 154 proteins were identified and 69 of them were novel. The expression of the genes encoding them was dependent on sporulation-specific sigma factors, σF, σE, σG and σK. The expression of a coat protein gene, cotS, was dependent on σK and GerE. CotE is essential for the assembly of CotS in the coat layer. Many coat genes were identified by reverse genetics and the regulation of the gene expression was studied in detail. Some cot genes are functioned in the resistance to heat and lysozyme, and some of the coat proteins are involved in the specificity of germinants. The yrbA is essential in spore development, yrbA deficient cells revealed abnormal figures of spore coat structure and changed the response to germinants. The location of 16 coat proteins was determined by the observation of fluorescence microscopy using fluorescence-labelled proteins. One protein was assigned to the cortex, nine to the inner coat, and four to the outer coat. In addition, CotZ and CgeA appeared in the outermost layer of the spore coat.

Genome Sequencing of Bacillus subtilis Strain XF-1 with High Efficiency in the Suppression of Plasmodiophora brassicae

The genome of the rhizobacterium Bacillus subtilis XF-1 is 4.06 Mb in size and harbors 3,853 coding sequences (CDS). Giant gene clusters were dedicated to the nonribosomal synthesis of antimicrobial lipopeptides and polyketides. Remarkably, XF-1 possesses a gene cluster involved in the synthesis of chitosanase that is related to the suppression of the pathogen Plasmodiophora brassicae.

Bacterial spore structures and their protective role in biocide resistance

The structure and chemical composition of bacterial spores differ considerably from those of vegetative cells. These differences largely account for the unique resistance properties of the spore to environmental stresses, including disinfectants and sterilants, resulting in the emergence of spore-forming bacteria such as Clostridium difficile as major hospital pathogens. Although there has been considerable work investigating the mechanisms of action of many sporicidal biocides against Bacillus subtilis spores, there is far less information available for other species and particularly for various Clostridia. This paucity of information represents a major gap in our knowledge given the importance of Clostridia as human pathogens. This review considers the main spore structures, highlighting their relevance to spore resistance properties and detailing their chemical composition, with a particular emphasis on the differences between various spore formers. Such information will be vital for the rational design and development of novel sporicidal chemistries with enhanced activity in the future.

Structural studies of AntD: an N-Acyltransferase involved in the biosynthesis of D-Anthrose

The unusual dideoxy sugar d-anthrose has been identified as an important component in the endospores of infectious agents such as Bacillus anthracis and Bacillus cereus. Specifically, it is the terminal sugar on the bacterium's exosporium, and it provides a point of interaction between the spore and the host. The biosynthesis of d-anthrose involves numerous steps starting from α-d-glucose 1-phosphate. Here we present a combined structural and functional investigation of AntD from B. cereus. This enzyme plays a key role in d-anthrose biosynthesis by catalyzing the acylation of the C-4″ amino group of dTDP-4-amino-4,6-dideoxyglucose using 3-hydroxy-3-methylbutyryl-CoA as the acyl donor. For this investigation, two ternary complexes of AntD were determined to 1.8 Å resolution: one in which the protein contained bound β-hydroxybutyryl-CoA and dTDP and the second with CoA and dTDP-4-amino-4,6-dideoxyglucose. On the basis of these high-resolution structures, it was shown that the side chain of Asp 94 lies within hydrogen bonding distance of the sugar C-4″ amino group, and the side chain of Ser 84 resides near the carbonyl oxygen of β-hydroxybutyryl-CoA. To test the roles of these residues in the catalytic mechanism of AntD, various site-directed mutant proteins were prepared and subjected to kinetic and structural analyses. The D94A and D94N mutant proteins demonstrated enzymatic activity, albeit with significantly reduced catalytic efficiencies. The S84A mutant protein showed an approximate 10-fold decrease in activity. Interestingly, the S84C and S84T mutant proteins were both active but demonstrated substrate inhibition. The three-dimensional structures of all of the mutant proteins were nearly identical to that of the wild-type enzyme, indicating that the changes in their kinetic parameters were not due to major conformational changes. Taken together, these data suggest that Asp 94 is important for substrate binding, but probably does not function as an enzymatic base, and that Ser 84 most likely plays a role in the formation of an oxyanion hole.

Gel-free proteomic identification of the Bacillus subtilis insoluble spore coat protein fraction

Species from the genus Bacillus have the ability to form endospores, dormant cellular forms that are able to survive heat and acid preservation techniques commonly used in the food industry. Resistance characteristics of spores towards various environmental stresses are in part attributed to their coat proteins. Previously, 70 proteins have been assigned to the spore coat of Bacillus subtilis using SDS-PAGE, 2-DE gel approaches, protein localization studies and genome-wide transcriptome studies. Here, we present a "gel-free" protocol that is capable of comprehensive B. subtilis spore coat protein extraction and addresses the insoluble coat fraction. Using LC-MS/MS we identified 55 proteins from the insoluble B. subtilis spore coat protein fraction, of which 21 are putative novel spore coat proteins not assigned to the spore coat until now. Identification of spore coat proteins from a B. subtilis food-spoilage isolate corroborated a generic and "applied" use of our protocol. To develop specific and sensitive spore detection and/or purification systems from food stuff or patient material, suitable protein targets can be derived from our proteomic approach. Finally, the protocol can be extended to study cross-linking among the spore coat proteins as well as for their quantification.

Testing nucleoside analogues as inhibitors of Bacillus anthracis spore germination in vitro and in macrophage cell culture

Bacillus anthracis, the etiological agent of anthrax, has a dormant stage in its life cycle known as the endospore. When conditions become favorable, spores germinate and transform into vegetative bacteria. In inhalational anthrax, the most fatal manifestation of the disease, spores enter the organism through the respiratory tract and germinate in phagosomes of alveolar macrophages. Germinated cells can then produce toxins and establish infection. Thus, germination is a crucial step for the initiation of pathogenesis. B. anthracis spore germination is activated by a wide variety of amino acids and purine nucleosides. Inosine and l-alanine are the two most potent nutrient germinants in vitro. Recent studies have shown that germination can be hindered by isomers or structural analogues of germinants. 6-Thioguanosine (6-TG), a guanosine analogue, is able to inhibit germination and prevent B. anthracis toxin-mediated necrosis in murine macrophages. In this study, we screened 46 different nucleoside analogues as activators or inhibitors of B. anthracis spore germination in vitro. These compounds were also tested for their ability to protect the macrophage cell line J774a.1 from B. anthracis cytotoxicity. Structure-activity relationship analysis of activators and inhibitors clarified the binding mechanisms of nucleosides to B. anthracis spores. In contrast, no structure-activity relationships were apparent for compounds that protected macrophages from B. anthracis-mediated killing. However, multiple inhibitors additively protected macrophages from B. anthracis.

Identifying experimental surrogates for Bacillus anthracis spores: a review

Bacillus anthracis, the causative agent of anthrax, is a proven biological weapon. In order to study this threat, a number of experimental surrogates have been used over the past 70 years. However, not all surrogates are appropriate for B. anthracis, especially when investigating transport, fate and survival. Although B. atrophaeus has been widely used as a B. anthracis surrogate, the two species do not always behave identically in transport and survival models. Therefore, we devised a scheme to identify a more appropriate surrogate for B. anthracis. Our selection criteria included risk of use (pathogenicity), phylogenetic relationship, morphology and comparative survivability when challenged with biocides. Although our knowledge of certain parameters remains incomplete, especially with regards to comparisons of spore longevity under natural conditions, we found that B. thuringiensis provided the best overall fit as a non-pathogenic surrogate for B. anthracis. Thus, we suggest focusing on this surrogate in future experiments of spore fate and transport modelling.

Identification of Bacillus anthracis spore component antigens conserved across diverse Bacillus cereus sensu lato strains

We sought to identify proteins in the Bacillus anthracis spore, conserved in other strains of the closely related Bacillus cereus group, that elicit an immune response in mammals. Two high throughput approaches were used. First, an in silico screening identified 200 conserved putative B. anthracis spore components. A total of 192 of those candidate genes were expressed and purified in vitro, 75 of which reacted with the rabbit immune sera generated against B. anthracis spores. The second approach was to screen for cross-reacting antigens in the spore proteome of 10 diverse B. cereus group strains. Two-dimensional electrophoresis resolved more than 200 protein spots in each spore preparation. About 72% of the protein spots were found in all the strains. 18 of these conserved proteins reacted against anti-B. anthracis spore rabbit immune sera, two of which (alanine racemase, Dal-1 and the methionine transporter, MetN) overlapped the set of proteins identified using the in silico screen. A conserved repeat domain protein (Crd) was the most immunoreactive protein found broadly across B. cereus sensu lato strains. We have established an approach for finding conserved targets across a species using population genomics and proteomics. The results of these screens suggest the possibility of a multiepitope antigen for broad host range diagnostics or therapeutics against Bacillus spore infection.

Expression of yeeK during Bacillus subtilis sporulation and localization of YeeK to the inner spore coat using fluorescence microscopy

The yeeK gene of Bacillus subtilis is predicted to encode a protein of 145 amino acids composed of 28% glycine, 23% histidine, and 12% tyrosine residues. Previous studies were unable to detect YeeK in wild-type spores; however, the 18-kDa YeeK polypeptide has been identified in yabG mutant spores. In this study, we analyze the expression and localization of YeeK to explore the relationship between YeeK and YabG. Northern hybridization analysis of wild-type RNA indicated that transcription of the yeeK gene, which was initiated 5 h after the onset of sporulation, was dependent on a SigK-containing RNA polymerase and the GerE protein. Genetic disruption of yeeK did not impair vegetative growth, development of resistant spores, or germination. Fluorescent microscopy of in-frame fusions of YeeK with green fluorescent protein (YeeK-GFP) and red fluorescent protein (YeeK-RFP) confirmed that YeeK assembles into the spore integument. CotE, SafA, and SpoVID were required for the proper localization of YeeK-GFP. Comparative analysis of YeeK-RFP and an in-frame GFP fusion of YabG indicated that YeeK colocalized with YabG in the spore coat. This is the first use of fluorescent proteins to show localization to different layers of the spore coat. Immunoblotting with anti-GFP antiserum indicated that YeeK-GFP was primarily synthesized as a 44-kDa molecule, which was then digested into a 29-kDa fragment that corresponded to the molecular size of GFP in wild-type spores. In contrast, a minimal amount of 44-kDa YeeK-GFP was digested in yabG mutant spores. Our findings demonstrate that YeeK is guided into the spore coat by CotE, SafA, and SpoVID. We conclude that YabG is directly or indirectly involved in the digestion of YeeK.

The transcriptional program underlying the physiology of clostridial sporulation

A detailed microarray analysis of transcription during sporulation of the strict anaerobe and endospore former Clostridium acetobutylicum is presented.

Background

Clostridia are ancient soil organisms of major importance to human and animal health and physiology, cellulose degradation, and the production of biofuels from renewable resources. Elucidation of their sporulation program is critical for understanding important clostridial programs pertaining to their physiology and their industrial or environmental applications.

Results

Using a sensitive DNA-microarray platform and 25 sampling timepoints, we reveal the genome-scale transcriptional basis of the Clostridium acetobutylicum sporulation program carried deep into stationary phase. A significant fraction of the genes displayed temporal expression in six distinct clusters of expression, which were analyzed with assistance from ontological classifications in order to illuminate all known physiological observations and differentiation stages of this industrial organism. The dynamic orchestration of all known sporulation sigma factors was investigated, whereby in addition to their transcriptional profiles, both in terms of intensity and differential expression, their activity was assessed by the average transcriptional patterns of putative canonical genes of their regulon. All sigma factors of unknown function were investigated by combining transcriptional data with predicted promoter binding motifs and antisense-RNA downregulation to provide a preliminary assessment of their roles in sporulation. Downregulation of two of these sigma factors, CAC1766 and CAP0167, affected the developmental process of sporulation and are apparently novel sporulation-related sigma factors.

Conclusion

This is the first detailed roadmap of clostridial sporulation, the most detailed transcriptional study ever reported for a strict anaerobe and endospore former, and the first reported holistic effort to illuminate cellular physiology and differentiation of a lesser known organism.

Fingerprinting species and strains of Bacilli spores by distinctive coat surface morphology

In this work, we applied high-resolution atomic force microscopy (AFM) to identify and characterize similarities and differences in the spore surface morphology of strains from four species of Bacilli: B. anthracis, B. cereus, B. pumilis, and B. subtilis. Common features of the examined spores in the dry state included ridges that spanned the long axis of each spore, and nanometer-scale fine rodlets that covered the entire spore surface. However, important differences in these features between species permitted them to be distinguished by AFM. Specifically, each species possessed significant variation in ridge architecture, and the rodlet width in B. anthracis was significantly less than that of the other species. To characterize similarities and differences within a species, we examined three B. subtilis strains. The ridge patterns among the three strains were largely the same; however, we detected significant differences in the ridge dimensions. Taken together, these experiments provide important information about natural variation in spore surface morphology, define structural features that can serve as species- and strain-specific signatures, and give insight into the dynamics of spore coat flexibility and its role during spore dormancy and germination.

A novel lipolytic enzyme, YcsK (LipC), located in the spore coat of Bacillus subtilis, is involved in spore germination

The predicted amino acid sequence of Bacillus subtilis ycsK exhibits similarity to the GDSL family of lipolytic enzymes. Northern blot analysis showed that ycsK mRNA was first detected from 4 h after the onset of sporulation and that transcription of ycsK was dependent on SigK and GerE. The fluorescence of the YcsK-green fluorescent protein fusion protein produced in sporulating cells was detectable in the mother cell but not in the forespore compartment under fluorescence microscopy, and the fusion protein was localized around the developing spores dependent on CotE, SafA, and SpoVID. Inactivation of the ycsK gene by insertion of an erythromycin resistance gene did not affect vegetative growth or spore resistance to heat, lysozyme, or chloroform. The germination of ycsK spores in a mixture of L-asparagine, D-glucose, D-fructose, and potassium chloride and LB medium was also the same as that of wild-type spores, but the mutant spores were defective in L-alanine-stimulated germination. In addition, zymogram analysis demonstrated that the YcsK protein heterologously expressed in Escherichia coli showed lipolytic activity. We therefore propose that ycsK should be renamed lipC. This is the first study of a bacterial spore germination-related lipase.

Morphogenesis of the Bacillus anthracis spore

Bacillus spp. and Clostridium spp. form a specialized cell type, called a spore, during a multistep differentiation process that is initiated in response to starvation. Spores are protected by a morphologically complex protein coat. The Bacillus anthracis coat is of particular interest because the spore is the infective particle of anthrax. We determined the roles of several B. anthracis orthologues of Bacillus subtilis coat protein genes in spore assembly and virulence. One of these, cotE, has a striking function in B. anthracis: it guides the assembly of the exosporium, an outer structure encasing B. anthracis but not B. subtilis spores. However, CotE has only a modest role in coat protein assembly, in contrast to the B. subtilis orthologue. cotE mutant spores are fully virulent in animal models, indicating that the exosporium is dispensable for infection, at least in the context of a cotE mutation. This has implications for both the pathophysiology of the disease and next-generation therapeutics. CotH, which directs the assembly of an important subset of coat proteins in B. subtilis, also directs coat protein deposition in B. anthracis. Additionally, however, in B. anthracis, CotH effects germination; in its absence, more spores germinate than in the wild type. We also found that SpoIVA has a critical role in directing the assembly of the coat and exosporium to an area around the forespore. This function is very similar to that of the B. subtilis orthologue, which directs the assembly of the coat to the forespore. These results show that while B. anthracis and B. subtilis rely on a core of conserved morphogenetic proteins to guide coat formation, these proteins may also be important for species-specific differences in coat morphology. We further hypothesize that variations in conserved morphogenetic coat proteins may play roles in taxonomic variation among species.

Expression of genes coding for GerA and GerK spore germination receptors is dependent on the protein phosphatase PrpE

The ability of Bacillus subtilis to form spores is a strategy for survival under unfavorable environmental conditions. It is equally crucial to break spore dormancy and return to vegetative growth at the appropriate time. Here we present data showing that the PrpE phosphatase is involved in the control of expression of genes coding for GerA receptors, which are necessary for L-alanine-induced spore germination. Moreover, PrpE is also involved in aspartic acid, glucose, fructose, and potassium (AGFK)-induced spore germination by controlling expression of genes coding for GerK receptors. In the absence of PrpE, the production of spores was essentially normal. However, L-alanine-induced spore germination and, to a lesser extent, the AGFK-induced pathway were abolished. In contrast, the germination pathway dependent on Ca2+-dipicolinate or dodecylamine remained intact. A protein phosphatase PrpE-green fluorescent protein fusion was localized to the prespore and to the dormant spore, consistent with a role in controlling expression of genes coding for GerA receptors. We propose that PrpE is an important element in a signal transduction pathway in Bacillus subtilis that controls the expression of genes coding for germination receptors.

Effect of mechanical abrasion on the viability, disruption and germination of spores of Bacillus subtilis

AIMS

To elucidate the factors influencing the sensitivity of Bacillus subtilis spores in killing and disrupting by mechanical abrasion, and the mechanism of stimulation of spore germination by abrasion.

METHODS AND RESULTS

Spores of B. subtilis strains were abraded by shaking with glass beads in liquid or the dry state, and spore killing, disruption and germination were determined. Dormant spores were more resistant to killing and disruption by abrasion than were growing cells or germinated spores. However, dormant spores of the wild-type strain with or without most coat proteins removed, spores of strains with mutations causing spore coat defects, spores lacking their large depot of dipicolinic acid (DPA) and spores with defects in the germination process exhibited essentially identical rates of killing and disruption by abrasion. When spores lacking all nutrient germinant receptors were enumerated by plating directly on nutrient medium, abrasion increased the plating efficiency of these spores before killing them. Spores lacking all nutrient receptors and either of the two redundant cortex-lytic enzymes behaved similarly in this regard, but the plating efficiency of spores lacking both cortex-lytic enzymes was not stimulated by abrasion.

CONCLUSIONS

Dormant spores are more resistant to killing and disruption by abrasion than are growing cells or germinated spores, and neither the complete coats nor DPA are important in spore resistance to such treatments. Germination is not essential for spore killing by abrasion, although abrasion can trigger spore germination by activation of either of the spore's cortex-lytic enzymes.

SIGNIFICANCE AND IMPACT OF THE STUDY

This work provides new insight into the mechanisms of the killing, disruption and germination of spores by abrasion and makes the surprising finding that at least much of the spore coat is not important in spore resistance to abrasion.

Differential susceptibility of macrophage cell lines to Bacillus anthracis–Vollum 1B

Bacillus anthracis (BA) is a spore forming bacterium and the causative agent of anthrax disease. Macrophages (Mphis) play a central role in anthrax disease. An important step in disease progression is the ability of BA to secrete lethal toxin (LeTx) that kills Mphis. LeTx is a heterodimer composed of protective antigen (PA) and lethal factor (LF). Researchers have shown that Mphi cell lines demonstrate differential susceptibility to purified LeTx; for example RAW264.7 and J774A.1 Mphis are sensitive to LeTx whereas IC-21 Mphis are resistant. Research has also suggested that exogenous factors, including other BA proteins, can influence the activity of LeTx. For this reason, the objective of the current work was to examine if RAW264.7, J774A.1, and IC-21 Mphis demonstrated differential susceptibility when cultured with a LeTx-producing strain of BA. Here, we co-cultured Mphis with LeTx+ Vollum 1B (V1B) spores for >15 h and assayed for Mphi cell death by morphology, trypan blue (TB) staining, neutral red (NR) activity, and lactate dehydrogenase (LDH) activity in the culture media. Following the addition of V1B spores, necrosis (approximately 50% mortality) was observed in RAW264.7 and J774A.1 Mphis at 7.5 and 10 h, respectively. By 15 h, both RAW264.7 and J774A.1 Mphis demonstrated 100% mortality. In contrast, IC-21 Mphis, under identical culture conditions, remained viable (98%) and activated throughout the course of the experiment (>24 h). The mechanism of RAW264.7 cell death appeared to involve LeTx because the V1B-induced cytotoxicity was dose-dependently reversed by the addition of anti-PA antibody to the culture media. These observations suggest there is differential susceptibility of Mphi cell lines to the LeTx+ V1B strain of BA. Further development of this in vitro model may be useful to further characterize the interactions between Mphis and BA spores.

On-chip cell lysis by local hydroxide generation

We present a novel method for on-chip cell lysis based on local hydroxide electro-generation. Hydroxide ions porate the cell membrane, leading to cell lysis. After lysis occurs, hydrogen ions, also generated on chip, react with excess hydroxide, creating a neutral pH lysate and eliminating the need for a wash step. Three different cell types are shown to be effectively lysed by this method: red blood cells, HeLa (human tumor line) and Chinese Hamster Ovary (CHO) cell lines. The release of cytoplasmic molecules from HeLa and CHO cells is demonstrated by monitoring the escape of a membrane impermeant dye from the cytoplasm. In the vicinity of the cathode, the hydroxide concentration is predicted by finite element simulations and shown to fit the lysis rates at different distances from the generating cathode. For flow-through experiments, a second device integrating a mechanical filter with hydroxide generation is fabricated and tested. The purpose of the filter is to trap whole cells and only allow lysate to pass through. The flow rate dependence of hydroxide concentration at the lysis filter is modeled and lysis efficiency is experimentally determined to be proportional to the hydroxide concentration for flow rates from 15 to 30 microl min(-1).

The bacillus spore coat

ABSTRACT Bacilli, which are abundant in the soil, form highly resistant dormant cell types, called spores, in response to starvation. The spore is organized into a series of concentrically arranged structures, each of which contribute in a different way to resistance against environmental stress. In certain bacteria, including Bacillus subtilis, the outermost of these structures is a multilayered protein shell, called the coat. The coat is both an armor plating and, almost certainly, possesses enzymatic activities, allowing it to have active roles as well. Assembly of the proteins comprising the coat is carefully controlled during spore assembly, resulting in a distinct pattern of layers, seen in cross section, and a discreet pattern of ridges on the surface. Although our understanding of spore coat composition and assembly is deepening, we still know little about the roles of the coat in interactions between spores and other organisms, particularly in the soil. Critical future directions for spore coat research include continued identification of the proteins that comprise the coat surface, characterization of the global chemical characteristics of this surface, and elucidation of how these features impact on other organisms in the soil.

The program of gene transcription for a single differentiating cell type during sporulation in Bacillus subtilis

Asymmetric division during sporulation by Bacillus subtilis generates a mother cell that undergoes a 5-h program of differentiation. The program is governed by a hierarchical cascade consisting of the transcription factors: σ^E, σ^K, GerE, GerR, and SpoIIID. The program consists of the activation and repression of 383 genes. The σ^E factor turns on 262 genes, including those for GerR and SpoIIID. These DNA-binding proteins downregulate almost half of the genes in the σ^E regulon. In addition, SpoIIID turns on ten genes, including genes involved in the appearance of σ^K_. Next, σ^K activates 75 additional genes, including that for GerE. This DNA-binding protein, in turn, represses half of the genes that had been activated by σ^K while switching on a final set of 36 genes. Evidence is presented that repression and activation contribute to proper morphogenesis. The program of gene expression is driven forward by its hierarchical organization and by the repressive effects of the DNA-binding proteins. The logic of the program is that of a linked series of feed-forward loops, which generate successive pulses of gene transcription. Similar regulatory circuits could be a common feature of other systems of cellular differentiation.

A comprehensive genomic analysis of sporulation in Bacillus subtilis reveals a coordinated program of gene activation and repression, which involves 383 genes

Compartmentalization of gene expression during Bacillus subtilis spore formation

Gene expression in members of the family Bacillaceae becomes compartmentalized after the distinctive, asymmetrically located sporulation division. It involves complete compartmentalization of the activities of sporulation-specific sigma factors, sigma(F) in the prespore and then sigma(E) in the mother cell, and then later, following engulfment, sigma(G) in the prespore and then sigma(K) in the mother cell. The coupling of the activation of sigma(F) to septation and sigma(G) to engulfment is clear; the mechanisms are not. The sigma factors provide the bare framework of compartment-specific gene expression. Within each sigma regulon are several temporal classes of genes, and for key regulators, timing is critical. There are also complex intercompartmental regulatory signals. The determinants for sigma(F) regulation are assembled before septation, but activation follows septation. Reversal of the anti-sigma(F) activity of SpoIIAB is critical. Only the origin-proximal 30% of a chromosome is present in the prespore when first formed; it takes approximately 15 min for the rest to be transferred. This transient genetic asymmetry is important for prespore-specific sigma(F) activation. Activation of sigma(E) requires sigma(F) activity and occurs by cleavage of a prosequence. It must occur rapidly to prevent the formation of a second septum. sigma(G) is formed only in the prespore. SpoIIAB can block sigma(G) activity, but SpoIIAB control does not explain why sigma(G) is activated only after engulfment. There is mother cell-specific excision of an insertion element in sigK and sigma(E)-directed transcription of sigK, which encodes pro-sigma(K). Activation requires removal of the prosequence following a sigma(G)-directed signal from the prespore.

Characterization of cyst cell formation in the purple photosynthetic bacterium Rhodospirillum centenum

Rhodospirillum centenum is an anoxygenic photosynthetic bacterium that is capable of differentiating into several cell types. When grown phototrophically in liquid, cells exhibit a vibrioid shape and have a single polar flagellum. When grown on a solid surface, R. centenum will differentiate into rod-shaped swarm cells that display numerous lateral flagella. Upon starvation for nutrients, R. centenum also forms desiccation-resistant cysts. In this study, it was determined that R. centenum has heat- and desiccation-resistance properties similar to other cyst-forming species. In addition, microscopic analyses of the morphological changes that occur during cyst cell development were performed. It was observed that R. centenum typically forms multi-celled clusters of cysts that contain from four to more than 10 cells per cluster. It was also determined that cell density has a minor effect on the percentage of cyst cells formed, with cell densities of 10(5)-10(7) cells per 5 micro l spot yielding the highest percentage of cyst cells. The striking similarities between the life cycle of R. centenum and the life cycle exhibited by Azospirillum spp. are discussed.

The IspA protease's involvement in the regulation of the sporulation process of Bacillus thuringiensis is revealed by proteomic analysis

We have observed that the process of sporulation of the ispA-deficient mutant was delayed under phase-contrast microscopy. The protein profiles of the ispA-deficient mutant have been analyzed using two-dimensional gel electrophoresis. The results of a proteomic analysis using MALDI-TOF MS indicated that a sporulation-associated protein, pro- [Formula: see text], was upregulated, while two other sporulation-associated proteins, SpoVD and SpoVR, were downregulated in the ispA-deficient mutant. It has been known that pro- [Formula: see text] is a precursor of [Formula: see text] and is required for gene expression related to the late stage of sporulation. Moreover, SpoVD and SpoVR are known to be involved in the formation of the spore cortex. Based on these observations, we propose that the delay in the sporulation process observed in the ispA-deficient mutant may be due to a failure of [Formula: see text] to signal sporulation. This phenomenon may be further enhanced by insufficient amount of SpoVD and SpoVR for cortex formation. In this study, we have revealed for the first time a possible pathway for the regulation of sporulation-associated proteins via IspA.

Formation and composition of the Bacillus anthracis endospore

The endospores of Bacillus anthracis are the infectious particles of anthrax. Spores are dormant bacterial morphotypes able to withstand harsh environments for decades, which contributes to their ability to be formulated and dispersed as a biological weapon. We monitored gene expression in B. anthracis during growth and sporulation using full genome DNA microarrays and matched the results against a comprehensive analysis of the mature anthrax spore proteome. A large portion (approximately 36%) of the B. anthracis genome is regulated in a growth phase-dependent manner, and this regulation is marked by five distinct waves of gene expression as cells proceed from exponential growth through sporulation. The identities of more than 750 proteins present in the spore were determined by multidimensional chromatography and tandem mass spectrometry. Comparison of data sets revealed that while the genes responsible for assembly and maturation of the spore are tightly regulated in discrete stages, many of the components ultimately found in the spore are expressed throughout and even before sporulation, suggesting that gene expression during sporulation may be mainly related to the physical construction of the spore, rather than synthesis of eventual spore content. The spore also contains an assortment of specialized, but not obviously related, metabolic and protective proteins. These findings contribute to our understanding of spore formation and function and will be useful in the detection, prevention, and early treatment of anthrax. This study also highlights the complementary nature of genomic and proteomic analyses and the benefits of combining these approaches in a single study.

Morphogenesis of bacillus spore surfaces

Spores produced by bacilli are encased in a proteinaceous multilayered coat and, in some species (including Bacillus anthracis), further surrounded by a glycoprotein-containing exosporium. To characterize bacillus spore surface morphology and to identify proteins that direct formation of coat surface features, we used atomic-force microscopy (AFM) to image the surfaces of wild-type and mutant spores of Bacillus subtilis, as well as the spore surfaces of Bacillus cereus 569 and the Sterne strain of Bacillus anthracis. This analysis revealed that the coat surfaces in these strains are populated by a series of bumps ranging between 7 and 40 nm in diameter, depending on the species. Furthermore, a series of ridges encircled the spore, most of which were oriented along the long axis of the spore. The structures of these ridges differ sufficiently between species to permit species-specific identification. We propose that ridges are formed early in spore formation, when the spore volume likely decreases, and that when the spore swells during germination the ridges unfold. AFM analysis of a set of B. subtilis coat protein gene mutants revealed three coat proteins with roles in coat surface morphology: CotA, CotB, and CotE. Our data indicate novel roles for CotA and CotB in ridge pattern formation. Taken together, these results are consistent with the view that the coat is not inert. Rather, the coat is a dynamic structure that accommodates changes in spore volume.

Bacterial outer membrane and cell wall penetration and cell destruction by polluting chemical agents and physical conditions

In the environment, bacteria and other microorganisms are subjected to a variety of constantly changing chemical and physical agencies. Chemical ones include antimicrobial compounds (both biocides and antibiotics), pollutants, drugs, cosmetic and pharmaceutical ingredients and pesticides. The physical agents include desiccation and drying, osmotic pressure, hydrostatic pressure, temperature and pH changes and radiations (ultraviolet, sunlight, ionizing). Bacteria must thus adapt to survive these inimicable conditions. Organisms such as bacterial spores usually survive, whereas other types of microorganisms may be much more susceptible. Depending on the type of organism, the bacterial cell wall, outer membrane or the spore outer layers may act as permeability barriers to the intracellular uptake of antibiotics and biocides. Some antibacterial agents interact with, and damage or modify, the outer components. Physical agencies are known to damage the cytoplasmic membrane or to produce alterations in DNA or proteins or enzymes. Nevertheless, significant damage to the cell wall or outer membrane may also occur. Four types of organisms are considered: cocci, mycobactria, Gram-negative bacteria and bacterial spores. The nature of the damage inflicted on, or in some cases prevented by, their outer cell layers is discussed for each type of organism.

The future challenges facing the development of new antimicrobial drugs

The emergence of resistance to antibacterial agents is a pressing concern for human health. New drugs to combat this problem are therefore in great demand, but as past experience indicates, the time for resistance to new drugs to develop is often short. Conventionally, antibacterial drugs have been developed on the basis of their ability to inhibit bacterial multiplication, and this remains at the core of most approaches to discover new antibacterial drugs. Here, we focus primarily on an alternative novel strategy for antibacterial drug development that could potentially alleviate the current situation of drug resistance--targeting non-multiplying latent bacteria, which prolong the duration of antimicrobial chemotherapy and so might increase the rate of development of resistance.