Differences in acromial morphology of shoulders in patients with degenerative and traumatic supraspinatus tendon tears

Association between acromion morphological parameters and rotator cuff tears in Somali population-a three-dimensional computed tomographic study

BACKGROUND

Previous research has established connections between the acromion index (AI), critical shoulder angle (CSA), acromiohumeral distance (AHD), and lateral acromion angle (LAA) with the incidence of rotator cuff tears (RCTs). Despite numerous international studies exploring the variability of shoulder joint morphology and parameters, research incorporating these parameters has yet to be conducted in Somalia. This study aims to analyze and describe the radiological parameters of acromion morphology in the Somali populations. Furthermore, to investigate the relationship of these parameters with rotator cuff tears within the Somali population.

METHODS

The data and physical examination of 188 patients who had a CT scan of the shoulder from 2018 to 2023 were retrospective analyses, including 107 patients (49 females, 58 males) with RCT and 81 patients (20 females, 61 males) with non-RCT. Using Three-dimensional computed tomography (3D-CT), parameters such as the AI, CSA, AHD, and LAA were compared between the RCT and non-RCT groups. Two independent assessors measured Each parameter from anterior views of the scapula. The inter- and intra-observer reliability was evaluated using the intraclass correlation coefficient (ICC). Additionally, the relationship between these parameters and the presence of rotator cuff tears was explored, and the predictive value of each parameter was assessed through receiver operating characteristic (ROC) analysis.

RESULTS

The results showed excellent intra- and inter-observer reliability, with all ICC values above 0.75. Among these, the CSA exhibited the greatest measurement stability, with an intra-observer ICC of 0.929 and an inter-observer ICC of 0.911. Significant positive correlations were identified between the AI, CSA, and the presence of RCTs, with CSA exhibiting the strongest correlation (r = 0.629; P < 0.001). Additionally, significant negative correlations were found between the presence of RCTs and both AHD (-0.247) and LAA (-0.338; P < 0.001 for both). The ROC analysis revealed that the CSA is the most effective parameter for identifying the presence of RCT (area under the ROC curve. 0.857).

CONCLUSION

The outcome of this study shows that AI, CSA, AHD, and LAA are independent factors associated with rotator cuff tears in the East African, particularly the Somali population. Specifically, larger AI, CSA, and smaller AHD and LAA are correlated with an increased likelihood of RCTs in this population. In patients with shoulder disease suspected of RCTs, using a 3D-CT scan to measure the CSA may be helpful, as it is the best predictor measurement.

CLINICAL TRIAL NUMBER

Not Applicable.

Acromial Tilt, Lateral Acromial Angle, and Acromiohumeral Interval as Risk Factors for Full-Thickness Supraspinatus Tendon Ruptures

Introduction The aim of this study was to investigate whether the morphology of the acromion and the inclination of the glenoid are associated with the risk of supraspinatus (SSP) tendon ruptures. Materials and methods A total of 106 patients were enrolled in this study between August 2012 and February 2014, including 55 symptomatic patients with an SSP tendon rupture (ruptured group) and 51 patients with an intact SSP (control group). MRI of the shoulder was performed for all patients in both groups. All MR images were analyzed by two blinded observers to measure the acromiohumeral interval (AHI), critical shoulder angle (CSA), acromial slope (AS), acromial tilt (AT), lateral acromial angle (LAA), acromion index (AI), and glenoid inclination (GI). Furthermore, both observers analyzed tendon integrity and quality on all MRIs in both groups. The results of the radiological examination concerning acromial and glenoidal morphology were compared between the control group with intact SSP tendons and the rupture group. Results Patients with an SSP tendon rupture had a narrower AHI (9.1 ± 1.4 mm vs. 7.8 ± 2.1 mm; p < 0.01), a greater AT (36.0 ± 5.4° vs. 39.7 ± 5.9°; p < 0.01), and a lower LAA (81.1 ± 7.2° vs. 76.2 ± 5.0°; p < 0.01). Patients with an AHI smaller than 8.2 mm (OR 1.88 [95% CI 1.2 to 2.7]; p < 0.01) or an AT greater than 36.5° (OR 3.56 [95% CI 1.57 to 8.01]; p = 0.03) or a LAA lower than 80.5° (OR 4.04 [95% CI 2.04 to 7.90]; p < 0.01) had higher risk for an SSP tendon rupture. No differences between either group were found in relation to the AS, CSA, AI, or glenoid inclination. Conclusions The results of this study showed that the AHI, LAA and AT correlated with SSP tendon rupture. It should be noted that the preoperative AHI less than 8.2 mm, AT greater than 36.5° or LAA less than 80.5° may be associated with SSP tendon ruptures.

The Critical Shoulder Angle as a Highly Specific Predictor of a Full-Thickness Rotator Cuff Tear: A Case-Control Study

BACKGROUND

The critical shoulder angle (CSA) has become an important topic of study in patients with rotator cuff tears (RCTs). However, there are conflicting data on whether the CSA can differentiate between patients with normal shoulder pathology and full-thickness RCTs on shoulder radiographs.

PURPOSE/HYPOTHESIS

The purpose of this study was to define the relationship between full-thickness RCTs and the CSA. It was hypothesized that patients with full-thickness RCTs would have an increased CSA compared with matched controls.

STUDY DESIGN

Cross-sectional study; Level of evidence, 3.

METHODS

This retrospective case-control study identified patients with magnetic resonance imaging scans showing full-thickness RCTs between 2009 and 2019. A 1 to 1 propensity score match was performed to identify a control group with normal rotator cuffs while controlling for baseline participant characteristics-including age, sex, body mass index, and tobacco use. A total cohort of 532 was identified, with 266 cases and 266 controls. Two independent observers measured CSAs on true anteroposterior shoulder radiographs.

RESULTS

There was no difference in baseline participant characteristics between the RCT and the non-RCT groups (P > .05). The mean CSA for the entire cohort was 33.6°± 4.2°. The CSA did not significantly vary by sex (P = .088) or tobacco usage (P = .16). The mean CSA for the RCT case group, 36.2°± 3.3°, was significantly different from the mean CSA for the control group, 30.9°± 3.3° (P < .0001). The receiver operating characteristic curve analysis produced an area under the curve of 0.88 (P < .0001). At CSAs ≥35°, there was a 67.7% sensitivity and 89.4% specificity for having a full-thickness RCT. Last, each degree of increase in the CSA increased the risk of having an associated RCT by 1.7 times (OR, 1.7 [95% CI, 1.551-1.852]; P < .0001).

CONCLUSION

Patients with RCTs had significantly higher CSAs compared with matched controls. Increased CSA was an independent risk factor for RCTs, with an odds ratio of 1.7 per degree. The CSA is an accurate test (area under the curve, 0.88) with good sensitivity (67.7%) and specificity (89.4%) at values ≥35°. The CSA is a simple, reproducible measurement that can assist in clinical decision-making regarding full-thickness RCTs.

The relationship between the shape of rotator cuff tears and shoulder anatomical parameters

BACKGROUND

The aim of this study is to investigate the potential relationship between shoulder anatomical parameters and the shape of rotator cuff tears (L-shaped, U-shaped, and crescent-shaped).

MATERIALS AND METHODS

The study included 160 (n:160) patients. Patients were divided into four groups: crescent type, u type and L type tears and control group. There were 40 cases in each group. The operated patients were divided into three groups based on the shape of the tears in arthroscopic images. Measurements of Critical Shoulder Angle (CSA), Greater Tuberosity Angle (GTA), Acromion Index (AI), Lateral Acromion Angle (LAA), and Humerus Footprint width (coronal width and sagittal width) were taken in each group and compared.

RESULTS

Patients were divided into four different groups: Crescent type group (n:40), L type group (n:40), U type group (n:40) and control group (n:40). Upon assessing the coronal and sagittal width measurements, The mean coranal width measurement of the L-type tear group was 12.62 ± 0.29 mm, which was significantly higher than all other groups (p < 0.05). The mean sagittal width of the L-type tear group was 34.95 ± 0.29 mm, which was significantly higher than all other groups (p < 0.05). When the groups were evaluated based on GTA, CSA, and AI data, the mean GTA measurement of the L-type tear group was 73.03 ± 0.95 degrees, which was significantly higher than all other groups (p < 0.05). The mean CSA measurement of the L-type tear group was 34.77 ± 0.66 degrees, which was significantly higher than all other groups (p < 0.05). The mean AI measurement of the L-type tear group was 0.77 ± 0.02, which was significantly higher than all other groups (p < 0.05). When the groups were evaluated based on LAA data, the mean LAA measurement of the L-type tear group was 76.98 ± 1.04 degrees, which was significantly lower than all other groups (p < 0.05).

CONCLUSION

In our study, especially in L-shaped tears, measurements of GTA, CSA, AI, LAA, coronal and sagittal width were found to be different compared to the control group. These results suggest that shoulder anatomy affects the mechanisms of rotator cuff tear formation and that these parameters play a more significant role in L-shaped tears.

Changes in the Lateral Acromion Angle in Rotator Cuff Tear Patients with Acromioplasty

BACKGROUND

Arthroscopic surgery has been established as an efficacious intervention for the treatment of rotator cuff tears. The primary aim of this study was to analyze the modifications in the lateral acromial angle (LAA) subsequent to rotator cuff repair surgery using single-row rivet fixation and double-row rivet fixation techniques. Furthermore, we sought to investigate the influence of LAA on the prognosis of rotator cuff repair surgery.

METHOD

This observational study retrospectively enrolled 105 patients diagnosed with degenerative rotator cuff tears who underwent arthroscopic rotator cuff repair between 2016 and 2019. Following the exclusion of two patients with subscapularis or superior labrum anterior and posterior (SLAP) tears, as well as three patients who were lost to follow-up, a cohort of 100 patients was included for clinical and imaging evaluation. Among these individuals, 50 were assigned to the double-row repair group, whereas the remaining 50 comprised the single-row repair group. Bilateral shoulder magnetic resonance imaging (MRI) scans were conducted no less than 24 months post-surgery. Experienced arthroscopic surgeons, blinded to the LAA measurements, assessed the rotator interval (RI) using a control MRI. Functional assessment was performed using the University of California, Los Angeles (UCLA) quick disability of the shoulder and arm, shoulder and hand (qDASH) score. The Wilcoxon signed-rank test for dependent samples was employed to compare data between the pre- and post-intervention groups. Pearson correlation coefficients were calculated to evaluate the relationship between different parameters.

RESULTS

The study population consisted of 73 female patients and 27 male patients, with a mean age of 58.32 ± 5.29 years and a mean follow-up duration of 25.88 ± 8.11 months. Preoperatively, the mean LAA was 75.81° ± 11.28°, RI was 4.78 ± 0.62, UCLA score was 17.54 ± 2.44, and qDASH score was 2.45 ± 0.25. The average tear size was 8.95 ± 2.11 mm. A statistically significant difference in LAA was observed between the preoperative and postoperative measurements, with the double-row repair group exhibiting a greater LAA than the single-row repair group. Finally, a significant correlation was identified between LAA, RI, and qDASH scores after a 24-month follow-up period.

CONCLUSION

According to our findings, the utilization of double-row rivet fixation has a greater LAA angle than single-row rivet fixation. Moreover, this preservation of LAA is significantly associated with the functional recovery of the shoulder joint.

Does Morphology of the Shoulder Joint Play a Role in the Etiology of Rotator Cuff Tear?

BACKGROUND

The etiology of rotator cuff tears (RCTs) have been investigated for years and many underlying causes have been identified. Shoulder joint morphology is one of the extrinsic causes of RCTs.

AIM

Morphometric measurements on MRI sections determined which parameters are an important indicator of RCT in patients with shoulder pain. The aim of this study was to determine the risk factors in the etiology of RCTs by evaluating the shoulder joint morphology with the help of previously defined radiological parameters.

METHOD

Between January 2019-December 2020, 408 patients (40-70 years old) who underwent shoulder MRI and met the criteria were included in the study. There were 202 patients in the RCT group and 206 patients in the control group. Acromion type, acromial index (AI), critical shoulder angle (CSA), acromiohumeral distance (AHD), lateral acromial angle (LAA), acromial angulation (AA), acromion-greater tuberosity impingement index (ATI), and glenoid version angle (GVA) were measured from the MRI images of the patients.

RESULTS

AI (0.64 vs. 0.60, p = 0.003) CSA (35.3° vs. 32.4°, p = 0.004), ATI (0.91 vs. 0.83, P < 0.001), and AA (13.6° vs. 11.9°, p = 0.011) values were higher in the RCT group than in the control group and the difference was significant. AHD (8.1 mm vs. 9.9 mm, P < 0.001), LAA (77.2° vs. 80.9°, p = 0.004) and GVA (-3.9° vs. -2.5°, P < 0.001) values were lower in the RCT group than in the control group, and again the difference was significant. According to the receiver operating characteristic curve analysis, the cutoff values were 0.623 for AI and 0.860 for ATI.

CONCLUSION

Acromion type, AI, CSA, AHD, LAA, AA, ATI, and GVA are suitable radiological parameters to evaluate shoulder joint morphology. High AI, CSA, AA, ATI, GVA and low AHD and LAA are risk factors for RCT.

Acromial Morphology Does Not Correlate with Age at Time of Rotator Cuff Tear: A Cross-Sectional Study

Background

The purpose of this study was to determine if scapular anatomy differs between younger and older patients with atraumatic full-thickness supraspinatus tears.

Methods

The critical shoulder angle, acromial index and lateral acromial angle were measured on standardized radiographs of two groups of patients who underwent arthroscopic repair of full-thickness degenerative supraspinatus tears. Group 1 included 61 patients under the age of 50 years while Group 2 included 45 patients over the age of 70 years. The mean critical shoulder angle, acromial index, and lateral acromial angle were then compared.

Results

There was no significant difference between groups for the critical shoulder angle (p = .433), acromial index (p = .881) or lateral acromial angle (p = .263). Interobserver reliability for critical shoulder angle, acromial index, and lateral acromial angle was nearly perfect (interclass correlation coefficient 0.996, 0.996, 0.998, respectively). No significant correlation existed between age and critical shoulder angle (p = .309), acromial index (p = .484) or lateral acromial angle (p = .685).

Discussion

While the critical shoulder angle and acromial index were found to be high and in the typical range for patients with rotator cuff tears in both groups, there were no significant differences in acromial morphology between Groups 1 and 2.

The Correlation between Various Shoulder Anatomical Indices on X-Ray and Subacromial Impingement and Morphology of Rotator Cuff Tears

OBJECTIVES

Rotator cuff injury caused by subacromial impingement presents different morphologies. This study aims to investigate the correlation between various shoulder anatomical indexes on X-ray with subacromial impingement and morphology of rotator cuff tears to facilitate surgical management.

METHOD

This retrospective study was carried out between January 2020 and May 2022. Patients who were diagnosed as sub-acromial impingement associated with rotator cuff tears (without tendon retraction) and received arthroscopic surgery were enrolled in this study. The radiographic indexes of acromial slope (AS), acromial tilt (AT), lateral acromial angle (LAA), acromial Index (AI), and sub-acromial distance (SAD) were measured on preoperative true AP view and outlet view. The location of rotator cuff tear (anterior, middle, posterior, medial, and lateral) and morphology of tear (horizontal, longitudinal, L-shaped, and irregular shaped) were evaluated by arthroscopy. Groups were set up due to different tear location and tear morphologies, by comparing the various radiographic indices between each group (one-way analysis of variance and t-test), the correlation between radiographic indices and tear characteristics was investigated.

RESULTS

We analyzed 92 shoulders from 92 patients with a mean age of 57.23 ± 8.45 years. The AS in anterior tear group (29.32 ± 6.91°) was significantly larger than that in middle tear group (18.41 ± 6.13°) (p = 0.000) and posterior tear group (24.01 ± 7.69°) (p = 0.041). The AS in posterior tear group (24.01 ± 7.69°) was significantly larger than that in middle tear group (18.41 ± 6.13°) (p = 0.029). The LAA in middle tear group (67.41 ± 6.54°) was significantly smaller than that in posterior group (72.74 ± 8.78°) (p = 0.046). The AS in longitudinal tear group (26.86 ± 8.41°) was significantly larger than that in horizontal tear group (22.05 ± 9.47°) (p = 0.035) and L-shaped group (21.56 ± 6.62°) (p = 0.032). The LAA in horizontal group (70.60 ± 6.50°) was significantly larger than that in L-shaped group (66.39 ± 7.31°) (p = 0.033). The AI in L-shaped tear group (0.832 ± 0.074) was significantly larger than that in horizontal tear group (0.780 ± 0.084) (p = 0.019) and irregular tear group (0.781 ± 0.068) (p = 0.047).

CONCLUSION

Acromion with a larger AS and a smaller LAA tend to cause anterior or posterior rotator cuff tears rather than middle tears in sub-acromial impingement. Meanwhile acromion with a larger AS tends to cause a longitudinal tear, a larger LAA tends to cause horizontal tears and a larger AI tends to cause L-shaped tears.

INFORMATIVE VALUE OF RADIOLOGICAL METHODS FOR DIAGNOSING SUBACROMIAL IMPINGEMENT SYNDROME

Up to 30% of the adult population suffers from impingement syndrome with severe pain. Detection of the disease in the early stages is difficult. Early diagnosis of the initial signs of degenerative changes in the subacromial space saves the patient from surgery and additional risk of postoperative complications. The aim of the study is to evaluate the informative value of radiation methods for diagnosing subacromial impingement syndrome based on the analysis of papers published by domestic and foreign authors, depending on etiopathogenetic factors and anatomical structure of the shoulder joint. Materials and methods. The authors analyzed Russian and foreign publications on anatomical, etiological, pathogenetic, clinical, diagnostic features of subacromial conflict syndrome from databases: e-library (https://www.elibrary.ru), Oxford Medicine Online (https://academic.oup.com /), PubMed (https://pubmed.ncbi.nlm.nih.gov/) and others. The applied research methods were analysis and synthesis, axiomatic method and abstraction. Results. The development of subacromial impingement syndrome was revealed to be due to the structural features of the shoulder joint, which differs from other joints in anatomical and functional complexity. At this, changes in the rotator cuff of the shoulder joint develop under the influence of various etiopathogenetic factors, which can be both external (a decrease in subacromial space, an increase in the volume of the coracoacromial arch, instability, overload of the shoulder joint) and internal (changes in vascularization, pathology of collagen fibers' microstructure, degeneration of the tendons in the rotator cuff, etc.) Currently there is no unified approach to the algorithm of radiation diagnosing the early signs of impingement syndrome and injuries to the rotator cuff of the shoulder joint. Although radiography is a simple and informative method to assess the condition of the shoulder joint, its sensitivity at an early stage of impingement syndrome is insufficient. Magnetic resonance imaging is highly informative and sensitive in the diagnosis of injuries to the rotator cuff of the shoulder joint, however, it has a number of limitations, such as the presence of some contraindications, its high cost, protracted examination time, etc. Ultrasound examination is currently considered the preferred method in the diagnosis of impingement syndrome due to its high informative value, speed of execution and the possibility of its repeatability. Conclusions. The analysis of the informative value of radiation diagnostics methods showed that in identifying the early signs of subacromial impingement syndrome, taking into account etiopathogenetic factors and the anatomical structure of the shoulder joint, the ultrasound method is optimal and preferable; for more complex and controversial cases, according to certain indications, they are the methods of X-ray computer and magnetic resonance imaging. In the absence of the possibility of using high-tech diagnostic methods, classical radiography of the shoulder joint is performed.

Evaluation of the prognostic value of the anatomical characteristics of the bony structures in the shoulder in bursal-sided partial-thickness rotator cuff tears

Background

In recent studies, individual scapular anatomy has been found to be related to degenerative full-thickness rotator cuff tears. However, research on the relationship between the anatomical characteristics of shoulder radiographs and bursal-sided partial-thickness rotator cuff tears (PTRCTs) is limited, and the risk factors for this pathology still need to be determined.

Methods

The bursal-sided PTRCTs group included 102 patients without a history of shoulder trauma who underwent arthroscopy between January 2021 and October 2022. A total of 102 demographically matched outpatients with intact rotator cuffs were selected as the control group. Radiographs were used to measure the lateral acromial angle (LAA), critical shoulder angle (CSA), greater tuberosity angle (GTA), β-angle, acromion index (AI), acromiohumeral distance (AHD), acromial tilt (AT), acromial slope (AS), acromial type, and acromial spur by two independent observers. Multivariate analyses of these data were used to identify potential risk factors for bursal-sided PTRCTs. Receiver operating characteristic (ROC) analysis was performed to assess the sensitivity and specificity of CSA, GTA, and AI for this type of pathology.

Result

The β-angle, AHD, AS and acromion type showed no difference between bursal-sided PTRCTs and controls (p = 0.009, 0.200, 0.747 and 0.078, respectively). CSA, GTA and AI were significantly higher in bursal-sided PTRCTs (p < 0.001). LAA, β-angle and AT were significantly lower in bursal-sided PTRCTs. Multivariate logistic regression analysis demonstrated significant correlations between the acromial spur (p = 0.024), GTA (p = 0.004), CSA (p = 0.003) and AI (p = 0.048) and bursal-sided PTRCTs. The areas under the ROC curves for AI, CSA, and GTA were 0.655 (95% CI 0.580-0.729), 0.714 (95% CI 0.644-0.784), and 0.695 (95% CI 0.622-0.767), respectively.

Conclusion

Acromial spur, GTA, CSA, and AI were independent risk factors for bursal-sided PTRCTs. Furthermore, CSA was the most powerful predictor of bursal-sided PTRCTs compared to GTA and AI.

Reliability and accuracy of the critical shoulder angle measured by anteroposterior radiographs: using digitally reconstructed radiograph from 3-dimensional computed tomography images

BACKGROUND

Accuracy of current standard radiographic measurement of the critical shoulder angle (CSA) is not well established. This study analyzed the reliability and accuracy of the CSA measurements obtained via anteroposterior (AP) radiographs, using a digitally reconstructed radiograph (true AP view) generated from a computed tomography image as the gold standard.

METHODS

The CSA was measured on the radiographs and true AP views of 88 consecutive patients who had undergone shoulder arthroscopy for rotator cuff tears. Intraobserver and interobserver reliabilities of the CSA, measured by 2 orthopedic surgeons, were evaluated, and the average deviation of the CSA between radiographs and true AP views was calculated. Moreover, we compared the deviation of CSA between standard AP films (types A1 and C1) and nonstandard AP films (other types) against the Suter-Henninger criteria.

RESULTS

Intraobserver and interobserver reliabilities were almost perfect on radiographs (0.96, 0.86) and true AP views (0.93, 0.85). The average deviation of CSA was 2.1° ± 1.6° for observer 1 and 2.2° ± 1.9° for observer 2. The percentage of cases with deviations of 2° or more when compared with the true AP view was 42% (37 of 88) for observer 1 and 53% (47 of 88) for observer 2. Only 22% (19 of 88) of films were standard AP films. The average deviation of CSA was not significantly different between standard and nonstandard AP films for observer 1 (standard 1.9° ± 1.3°; nonstandard 2.1° ± 1.7°; P = .76) and observer 2 (standard 1.6° ± 1.5°; nonstandard 2.4° ± 1.9°; P = .09).

CONCLUSION

The CSA measurements using radiography were highly congruent, but a large measurement deviation occurred between radiographs and true AP views. The clinical usefulness and role of CSA in diagnosis require careful consideration.

Acute, Traumatic Rotator Cuff Tears Have Smaller Critical Shoulder Angles Than Degenerative Tears

PURPOSE

To determine whether the critical shoulder angle (CSA) in acute, traumatic rotator cuff tears (RCTs) is consistent with the previously described CSA in chronic degenerative RCTs.

METHODS

We performed a multicenter retrospective analysis of 134 patients presenting to 5 surgeons fellowship trained in shoulder and elbow or sports. Preoperative imaging was used to measure the CSA and tear characteristics. Patients were included if they had acute, traumatic full-thickness RCTs documented on advanced imaging and had preoperative Grashey radiographs. Patients were excluded if they had any history of shoulder pain, injury, surgery, or treatment prior to the current episode; were overhead athletes; or had fatty infiltration greater than Goutallier grade 1 on imaging.

RESULTS

The mean CSA was 33.5° (standard deviation, 4.1°), and 60% of tears had a CSA of less than 35°, much below the mean of 38.0° and the threshold of greater than 35° in degenerative RCTs. The mean age was 58 years, and 70% of patients were men. Overall, 60% of tears involved the subscapularis, 49% of tears occurred in patients aged 60 years or older, and 18% of patients sustained a dislocation. Older age (β = 0.316, P = .003) and male sex (β = 5.532, P = .025) were predictive of tear size, and older age (β = 0.229, P = .011) and biceps avulsion (β = 8.822, P = .012) were predictive of tear retraction.

CONCLUSIONS

Acute, traumatic RCTs have CSAs that are 5° smaller than those of degenerative tears, and the majority (60%) have CSAs that are below the threshold consistent with degenerative RCTs. The majority of traumatic tears (60%) involve the subscapularis.

CLINICAL RELEVANCE

The study findings suggest that a traumatic tear is not simply the acute failure of a degenerative tendon and that it represents a distinct pathologic entity. These findings support current practice of treating traumatic RCTs differently than degenerative RCTs.

How much acromial bone should be removed to decrease the critical shoulder angle? A 3D CT acromioplasty planning study

BACKGROUND

A high critical shoulder angle (CSA) is associated with rotator cuff tear (RCT) and retear rate after repair. CSA reduced to less than 33° by acromioplasty is correlated with better clinical results and healing. But up to 24% of patients retain a CSA above 35° after acromioplasty. The objective of the study was to evaluate the use of 3D when planning acromioplasty and measure acromial bone removal volume dimensions.

METHODS

Computed tomography (CT) scans from 45 patients with RCT and CSA ≥ 38° were retrospectively included. A 33° CSA cutting plane was positioned. Acromion was divided into 5 mm slices and acromial bone resection measured on each slice.

RESULTS

Intra- and inter-observer reproducibility measurements were rated strong or very strong. Patients' mean preoperative CSA was 40° (38°, 49° ± 2.3°). Measurements of acromial resection were: anteroposterior length: 32.7 mm (20, 50 ± 7.4); inferior width: 7.6 mm (4.2, 19 ± 2.9); superior width: 4.1 mm (0, 16 ± 3.0); height: 6.1 mm (1.7, 6.7 ± 1.6); and cutting angle: 74° (46, 91 ± 8.0). Maximum width of acromial resection was located 10.6 mm (5, 17.5 ± 0.6) from the acromion's anterior edge and decreased gradually moving posteriorly. Preoperative CSA was linearly correlated with width (P < 0.0001, R = 84%) and length (P = 0.0001, R = 28%) of acromioplasty; the higher the CSA, the greater the width and length.

CONCLUSIONS

3D CT reconstructions are valid for planning a CSA decreasing acromioplasty. To reduce CSA to 33°, acromioplasty must be performed anterolaterally and resection is at least 2 cm long anteroposteriorly. For higher CSAs, acromioplasty may require lateral resection over 1 cm in width and up to 5 cm in length. To decrease the CSA efficiently, acromioplasty must be adapted to patient anatomy and 3D planning could be considered.

LEVEL OF EVIDENCE

IV.

A predictive model for the critical shoulder angle based on a three-dimensional analysis of scapular angular and linear morphometrics

BACKGROUND

The purpose of this study was to define the features of scapular morphology that are associated with changes in the critical shoulder angle (CSA) by developing the best predictive model for the CSA based on multiple potential explanatory variables, using a completely 3D assessment.

METHODS

3D meshes were created from CT DICOMs using InVesalius (Vers 3.1.1, RTI [Renato Archer Information Technology Centre], Brazil) and Meshmixer (3.4.35, Autodesk Inc., San Rafael, CA). The analysis included 17 potential angular, weighted linear and area measurements. The correlation of the explanatory variables with the CSA was investigated with the Pearson's correlation coefficient. Using multivariable linear regression, the approach for predictive model-building was leave-one-out cross-validation and best subset selection.

RESULTS

Fifty-three meshes were analysed. Glenoid inclination (GI) and coronal plane angulation of the acromion (CPAA) [Pearson's r: 0.535; -0.502] correlated best with CSA. The best model (adjusted R-squared value 0.67) for CSA prediction contained 10 explanatory variables including glenoid, scapular spine and acromial factors. CPAA and GI were the most important based on their distribution, estimate of coefficients and loss in predictive power if removed.

CONCLUSIONS

The relationship between scapular morphology and CSA is more complex than the concept of it being dictated solely by GI and acromial horizontal offset and includes glenoid, scapular spine and acromial factors of which CPAA and GI are most important. A further investigation in a closely defined cohort with rotator cuff tears is required before drawing any clinical conclusions about the role of surgical modification of scapular morphology.

LEVEL OF EVIDENCE

Level 4 retrospective observational cohort study with no comparison group.

Reliability of Bigliani's Classification using Magnetic Resonance Imaging for Determination of Acromial Morphology

Introduction

Bigliani classification is used for determination of acromial morphology, but poor inter-observer reliability has been reported on conventional radiographs. This study aims to assess inter- and intra-observer reliability using magnetic resonance imaging (MRI).

Materials and methods

Forty consecutive patients diagnosed with subacromial impingement syndrome were included to study. All subjects underwent standard shoulder MRI scan and acromial shape was evaluated by nine observers of different level of expertise (three attending surgeons, three senior orthopaedic residents and three radiologists). A second set of evaluation was performed in order to assess intra-observer reproducibility. Kappa (κ) coefficient analyses both for interobserver reliability and intra-observer reproducibility were then performed.

Results

Overall inter-observer agreement among nine observers was fair (κ=0.323). κ values for all 4 individual types ranged from 0.234 to 0.720 with highest agreement for type 4 and lowest agreement for type 3. Second evaluation did not result with an increase of inter-observer agreement (κ=0.338, fair). The κ coefficients for intra-observer reproducibility of nine observers ranged from 0.496 to 0.867. Overall intra-observer reproducibility was substantial. Comparison of inter- and intra-observer reliability among three groups showed no significant difference (p=0.92 and 0.22, respectively).

Conclusion

Results showed that MRI did not show superior reliability compared to conventional radiographs. Moreover, inter- and intra-observer agreement did not differ between observers of different level of expertise. Findings of present study suggest that despite a sophisticated imaging modality like MRI, Bigliani's classification apparently lacks accuracy and additional criteria, or different assessment methods are required to assess acromial morphology for clinical guidance.

Does the critical shoulder angle influence retear and functional outcome after arthroscopic rotator cuff repair? A systematic review and meta-analysis

PURPOSE

This systematic review and meta-analysis aimed to evaluate the correlation between increased critical shoulder angle (CSA) and higher retear rates and functional outcomes after arthroscopic rotator cuff repair (ARCR).

METHODS

PubMed, Embase, Web of Science, and Cochrane Library databases published before January 2022 were comprehensively searched. Two reviewers independently reviewed the titles and abstracts using the specified criteria. Studies were included if the authors clearly described the correlation between the CSA and rotator cuff repair. Data on patient characteristics, mean CSA, retear rate, and the functional score was pooled from the selected articles. A meta-analysis was performed using Review Manager (RevMan) 5.4.1 software, 2020 (Cochrane Collaboration, Copenhagen, Denmark).

RESULTS

Eleven articles involving 1449 patients from 7 countries were included. The ages of the patients ranged from 45 to 75 years. The follow-up period ranged from 6 to 96 months. The mean CSA was greater in the retear group than in the non-retear group after ARCR (mean difference 2.73°; 95% confidence interval [CI] 0.69-4.77) (p = 0.009). Three studies evaluated the association between increased CSA and the postoperative retear rate. All three studies showed a higher postoperative retear rate in patients with an increased CSA (odds ratio 5.35; 95% CI 2.02-14.15; p = 0.0007). No association was found between CSA and Constant-Murley (Constant), the University of California at Los Angeles (UCLA), or Visual Analog Scale (VAS) scores during the follow-up period of 24-96 months (p > 0.05).

CONCLUSIONS

This systematic review and meta-analysis showed that CSA correlates highly with rotator cuff retear after ARCR. In addition, the postoperative retear rate of the rotator cuff increased with increased CSA. CSA appeared to not affect worse functional outcomes in patients after ARCR.

Critical shoulder angle and failure of conservative treatment in patients with atraumatic full thickness rotator cuff tears

Background

Atraumatic full thickness rotator cuff tears (AFTRCT) are common lesions whose incidence increases with age. Physical therapy is an effective conservative treatment in these patients with a reported success rate near 85% within 12 weeks of treatment. The critical shoulder angle (CSA) is a radiographic metric that relates the glenoid inclination with the lateral extension of the acromion in the coronal plane. A larger CSA has been associated with higher incidence of AFTRCT and a higher re-tear rate after surgical treatment. However, no study has yet described an association between a larger CSA and failure of conservatory treatment in ARCT. The main objective of this study is to determine whether there is an association between CSA and failure of physical therapy in patients with AFTRCT.

Methods

We reviewed the imaging and clinical records of 48 patients (53 shoulders), 60% female, with a mean age of 63.2 years (95% CI ± 10.4 years); treated for AFTRCT who also underwent a true anteroposterior radiograph of the shoulder within a year of diagnosis of the tear. We recorded demographic (age, sex, type of work), clinical (comorbidities), and imaging data (CSA, size and location of the tear). We divided the patients into two groups according to success or failure of conservative treatment (indication for surgery), so 21 shoulders (39.6%) required surgery and were classified as failure of conservative treatment.

Univariate and multivariate analysis was performed to detect predictors of failure of conservative treatment.

Results

The median CSA was 35.5º with no differences between those with failure (median 35.5º, range 29º to 48.2º) and success of conservative treatment (median 35.45º, range 30.2º to 40.3º), p = 0.978.

The multivariate analysis showed a younger age in patients with failure of conservative treatment (56.14 ± 9.2 vs 67.8 ± 8.4, p < 0.001) and that male gender was also associated with failure of conservative treatment (57% of men required surgery vs 28% of women, p = 0.035).

Conclusions

It is still unclear if CSA does predict failure of conservative treatment. A lower age and male gender both could predicted failure of conservative treatment in AFTRCT. Further research is needed to better address this subject.

Acromial fractures following reverse shoulder arthroplasty: the role of the acromial morphology and a comparison of clinical outcomes

BACKGROUND

The purpose was to evaluate the relationship between acromial morphology and the location of acromial fractures following reverse shoulder arthroplasty and determine whether fracture location and displacement impact clinical outcomes.

METHODS

We performed a multicenter retrospective review of reverse shoulder arthroplasties complicated by acromial fractures. Radiographs were compared to determine the differences in acromial morphology, as well as fracture orientation and pattern, between patients with Levy type I (n = 17) and Levy type II (n = 25) fractures. Patients with a minimum of 2 years' follow-up were selected to examine the association between clinical outcomes and fracture location and displacement. Twenty-two patients were stratified based on whether they achieved the minimal clinically important difference (MCID) in the American Shoulder and Elbow Surgeons score (20 points). The groups were then compared regarding fracture location and displacement using measurements such as the acromiohumeral distance.

RESULTS

The Levy type I group had a higher acromial slope than the Levy type II group (127° vs. 117°, P < .001). Levy type I fractures had a transverse pattern occurring in the coronal plane, whereas Levy type II fractures had an oblique pattern occurring in the sagittal plane (P < .001). At final follow-up, 12 of 22 patients (55%) achieved the MCID. Those who did not achieve the MCID had more displaced fractures including a lower acromiohumeral distance (8 mm vs. 20 mm, P = .007). There was no difference in the distribution of Levy type I and type II fractures based on the MCID cutoff (P = .093).

CONCLUSION

An increased acromial slope is associated with transverse fractures in the Levy I region, whereas a lower acromial slope is associated with oblique fractures in the Levy II region. Overall, 55% of patients achieved the MCID at mid-term follow-up. The outcomes of those who did not achieve the MCID became worse postoperatively, and this was associated with increased fracture displacement.

Prediction of Bilaterality in Patients With 1 Posterosuperior Rotator Cuff Tear

BACKGROUND

In patients with a known unilateral posterosuperior rotator cuff tear (PSRCT), the ability to predict a contralateral PSRCT may assist in earlier diagnosis and improved patient outcomes.

PURPOSE

To determine factors associated with bilateral PSRCT and their most predictive combinations using a nonhospitalized general population.

STUDY DESIGN

Cross-sectional study; Level of evidence, 3.

METHODS

This study involved 736 individuals (n = 1472 shoulders) drawn from a rural cohort. PSRCT was diagnosed using magnetic resonance imaging. Symptoms of the contralateral shoulder were not considered. The demographic, physical, social, metabolic, and imaging factors, as well as comorbidities, were evaluated using logistic regression analysis. Cutoff values for the significantly associated variables obtained from multivariable logistic regression analysis were calculated using the receiver operating characteristic (ROC) curve. The areas under the ROC curve (AUCs) of the combinations of significantly associated variables were compared using the DeLong method to determine the combination most predictive of bilateral PSRCT. The likelihood ratio and the posttest probability for each of the combinations were assessed.

RESULTS

Age ≥61 years, manual labor, critical shoulder angle (CSA) ≥35°, retraction degree of Patte ≥ grade 2, biceps tendon injury, and metabolic syndrome were significantly associated with bilateral PSRCT in multivariable analysis (P < .001). The 1-by-1 combination of any 4 of the 6 associated factors significantly increased the AUC of any smaller combinations of those 6 factors (P < .001). The AUCs of the 4-somes were all similar (P ≥ .383) and were not significantly increased by further addition of identified associated factors (P ≥ .422). Any combination of 4 of the 6 associated factors was highly predictive of bilateral PSRCT, each having a minimum AUC of 0.70, a likelihood ratio of >10, and a minimum posttest probability of 80%.

CONCLUSION

Unilateral PSRCT, accompanied by any 4 of the variables of age ≥61 years, manual labor, CSA ≥35°, retraction degree of Patte ≥ grade 2, biceps tendon injury, and metabolic syndrome, is highly predictive of PSRCT in the other shoulder.

A prospective observational case control study investigating the coronal plane scapular morphological differences in full-thickness posterosuperior cuff tears and primary glenohumeral osteoarthritis

INTRODUCTION

The critical shoulder angle (CSA) is a surrogate marker of the coronal plane morphology of the scapula. CSA differences between scapulae could be due to differences in glenoid inclination (GI) or the location of the most lateral part of the acromion relative to the inferior glenoid, or both. An understanding of the hierarchy of the scapular morphological changes associated with glenohumeral osteoarthritis (GHOA) and rotator cuff (RC) tears would allow accurate biomechanical modeling.

METHODS

A prospective observational case control study was undertaken in which the GI, "nonglenoid"-CSA, acromial vertical offset index, acromial horizontal offset index, acromial horizontal-vertical offset index, and coronal plane angulation of the acromion (CPAA-m) were measured on high-quality radiographs to compare coronal plane scapular anatomy in: (1) patients with asymptomatic atraumatic full-thickness RC tears, (2) patients with symptomatic primary GHOA, and (3) a control group with no RC tear or GHOA treated for glenohumeral instability or symptomatic labral pathology. Intraobserver reliability of the measurements was performed.

RESULTS

In the GHOA group, the GI was lower (less superiorly inclined) than the RC tear group (difference between the means: -4.8°, 95% confidence interval [CI] [-8.8°, -0.9°], P = .014) and the control group (difference between the means: -7.9°, 95% CI [-11.8°, -3.9°], P = .000); there was no difference in the acromial measurements. In the RC tear group, the nonglenoid-CSA was higher (difference between the means: 7.7°, 95% CI [3.0°, 12.3°], P = .001), the acromial vertical offset index was lower (difference between the means: -0.13, 95% CI [-0.24, -0.01], P = .026), and the acromial horizontal-vertical offset index was higher (difference between the means: 0.15, 95% CI [0.01, 0.28], P = .030) than the control group; there was no difference in the acromial horizontal offset index or the GI. The CPAA-m was lower (greater coronal plane downslope of the acromion) in both GHOA (difference between the means: -9.6°, 95% CI [-18.6°, -0.5°], P = .036) and RC tears (difference between the means: -9.9°, 95% CI [-19.0°, -0.9°], P = .029) compared with the control group. The intraclass correlation coefficients for intraobserver reliability demonstrated excellent reliability for the measurements (all >0.900).

DISCUSSION

Scapulae associated with GHOA have lower GI, but no spatial differences in the location of the lateral acromion compared with a normal population. Scapulae associated with RC tears have a lower vertical offset of the lateral acromion, but no difference in horizontal offset or GI compared with a normal population. The downslope of the acromion in the coronal plane is greater (lower CPAA-m) in both RC tears and GHOA than the normal population.

A high acromion-greater tuberosity impingement index increases the risk of retear after arthroscopic rotator cuff repair

BACKGROUND

No evaluation has been done on the relationship of the acromion-greater tuberosity impingement index (ATI) with retear after arthroscopic rotator cuff repair (ARCR). Our purpose was to evaluate whether a higher ATI is associated with retear after ARCR.

METHODS

132 patients received ARCR and underwent MRI scan at a one year follow-up to assess tendon healing, and the findings were graded no retear (NR), partial-thickness retear (PR) or full-thickness retear (FR). The ATI, the critical shoulder angle (CSA), acromion index (AI) and lateral acromial angle (LAA) were measured with postoperative radiographs. Functional scores were obtained preoperatively and at a one year follow-up.

RESULTS

Postoperative Constant scores and ASES scores were significantly different between groups with inferior outcomes in the FR group (p < 0.05 for all). The UCLA score was significantly better in the NR group compared with the PR and FR groups (p < 0.05), and in the PR group compared with the FR group (p < 0.05). For ATI and CSA, the values of the PR and FR groups were larger than the NR group (p < 0.05 for all), but there were no significant differences between the PR and FR groups (p > 0.05 for all). No significant differences were observed with regard to the AI and LAA (p > 0.05, respectively). The repair integrity was positively related to the ATI (0.304, p < 0.05) and CSA (0.252, p < 0.05), but not related to the AI or LAA (p > 0.05 for both). ATI was not related to any functional scores (p > 0.05 for all).

CONCLUSION

This study revealed that the ATI was positively related to rotator cuff retear. Patients with retears had significantly greater ATIs after ARCR. Level of Evidence: III, case-control study.

Are there differences in arthroscopic and histological features between traumatic and degenerative rotator cuff tears in elderly patients? A prospective dual-center analysis

Background

Discriminating traumatic rotator cuff tears (RCTs) from degenerative RCTs is sometimes difficult in elderly patients because the prevalence of asymptomatic RCTs increases with age. Little intraoperative information is available on the characteristics of traumatic and degenerative RCTs in elderly patients. The purpose of this study was to compare the arthroscopic findings and histological changes of the coracoacromial ligament (CAL) between traumatic and degenerative RCTs in elderly patients.

Methods

Forty-two shoulders of 42 patients aged ≥ 65 years underwent arthroscopic rotator cuff repair. Nineteen patients had traumatic full-thickness RCTs (Group T), and 23 had degenerative full-thickness RCTs (Group D). The quality of the rotator cuff tissue and the condition of the long head of the biceps were examined. The grade of CAL was evaluated both arthroscopically and histologically. The stiffness of the musculotendinous unit was calculated by measuring the force and displacement using a tensiometer. The arthroscopic and histological findings of the two groups were compared.

Results

Although the mean tendon displacement was comparable, the stiffness was different between Group T and Group D (0.56 ± 0.31 and 1.09 ± 0.67 N/mm, respectively; p < 0.001). Both arthroscopic and histological analysis of the CAL showed that the degenerative changes in the CAL were milder in Group T than in Group D (p < 0.001 and p < 0.001, respectively). There was a moderate positive correlation between the arthroscopic findings of CAL degeneration and the histopathological changes in this ligament (r = 0.47, p = 0.002).

Conclusions

Traumatic RCTs were characterized by preserved elasticity of the musculotendinous unit and milder CAL degeneration compared with degenerative RCTs even in elderly patients.

Does isolated arthroscopic anterior acromioplasty modify critical shoulder angle?

INTRODUCTION

Critical shoulder angle (CSA)>35° correlates significantly with primary rotator cuff tear and re-tear after repair. Acromial axial orientation varies between individuals. The present study aimed to assess the impact of strictly anterior acromioplasty on CSA.

HYPOTHESIS

CSA is reduced by arthroscopic anterior acromioplasty.

MATERIAL AND METHODS

A single-center retrospective study included patients receiving isolated arthroscopic acromioplasty between January 2016 and December 2017. Exclusion criteria comprised history of surgery and fracture or dislocation of the shoulder. Pre- and post-operative AP shoulder radiographs were taken. The angle subtended by a line between the inferior and superior edges of the glenoid and a line between the inferior edge of the glenoid and the most lateral point on the acromion was measured.

RESULTS

One hundred and two patients were included: mean age, 50.5±10.1 years (range, 23-82 years). Mean CSA was 34.7±4.4° (range, 26-48°) preoperatively and 31.7±3.7° (range, 23-40°) postoperatively (p<0.001). In the group with CSA >35°, the decrease was significant: 34.4±3.2° (range, 28-40°) versus 38.9±2.8° (range, 36-48°) (p<0.001), with 64% CSA <35° after isolated anterior acromioplasty.

DISCUSSION

CSA was decreased by arthroscopic acromioplasty. However, in 36% of cases with preoperative CSA >35°, CSA was not normalized.

CONCLUSION

Anterior arthroscopic acromioplasty significantly reduced CSA in the overall population, and especially in case of high CSA.

LEVEL OF EVIDENCE

IV; retrospective study.

Are critical shoulder angle and acromion index correlated to the size of a rotator cuff tear

PURPOSE

Scapular morphology is an extrinsic factor playing role in rotator cuff tear (RCT) etiology. The objective of this study was to evaluate the relationship between critical shoulder angle (CSA) and acromion index (AI) with partial-bursal side and full thickness RCT and the size of the RCT.

HYPOTHESIS

The hypothesis was that CSA and AI would be greater in partial bursal-side RCT and full-thickness RCT patients and would increase with the size of the RCT.

METHODS

This retrospective study assessed 218 patients who had standard shoulder radiographs and magnetic resonance imaging. Patients were divided into three groups: intact rotator cuff (68), partial bursal-side RCT (34) and full-thickness RCT (116). In the second part, full-thickness RCT patients were divided into four groups according to RCT size; small (<1cm), medium (1-3cm), large (3-5cm) and massive (>5cm). AI and CSA measurements were evaluated from radiographs.

RESULTS

The mean CSA was 32.8̊ in control group, 34.3̊ in partial group and 36.9̊ in full-thickness group. The mean AI was 0.66, 0.68 and 0.72 respectively. Significant difference was found in AI and CSA between full thickness RCT and intact RC group (p<0.01), and partial RCT and full thickness RCT group (p<0.05) in paired comparisons. In full thickness RCT size groups the mean CSA was 34.2̊, 36.4̊, 39.0̊ and 40.8̊ and mean AI was 0.70, 0.71, 0.73 and 0.79 respectively. Significant difference was found between small-large, small-massive, medium-massive groups for CSA in paired comparisons and between small-massive, medium-massive groups for AI.

CONCLUSION

CSA and AI were significantly greater in full-thickness RCT patients and the size of the RCT increased with CSA and AI. The greater CSA and AI could be predictors for larger RCT.

LEVEL OF EVIDENCE

III; Cross-Sectional Design; Prognosis Study.

Are Knotted or Knotless Techniques Better for Reconstruction of Full-Thickness Tears of the Superior Portion of the Subscapularis Tendon? A Study in Cadavers

BACKGROUND

Knotted and knotless single-anchor reconstruction techniques are frequently performed to reconstruct full-thickness tears of the upper portion of subscapularis tendon. However, it is unclear whether one technique is superior to the other.

QUESTIONS/PURPOSES

(1) When comparing knotless and knotted single-anchor reconstruction techniques in full-thickness tears of the upper subscapularis tendon, is there a difference in stiffness under cyclic load? (2) Are there differences in cyclic gapping between knotless and knotted reconstructions? (3) Are there differences in the maximal stiffness, yield load, and ultimate load to failure? (4) What are the modes of failure of knotless and knotted reconstruction techniques?

METHODS

Eight matched pairs of human cadaveric shoulders were dissected, and a full-thickness tear of the subscapularis tendon (Grade 3 according to the Fox and Romeo classification) was created. The cadavers all were male specimens, with a median (range) age of 69 years (61 to 75). Before biomechanical evaluation, the specimens were randomized into two equal reconstruction groups: knotless single anchor and knotted single anchor. All surgical procedures were performed by a single orthopaedic surgeon who subspecializes in sports orthopedics and shoulder surgery. With a customized set up that was integrated in a dynamic material testing machine, the humeri were consecutively loaded from 10 N to 60 N, from 10 N to 100 N, and from 10 N to 180 N for 50 cycles. Furthermore, the gapping behavior of the tear was analyzed using a video tracking system. Finally, the stiffness, gapping, maximal stiffness, yield loads, and maximum failure loads of both reconstruction groups were statistically analyzed. Failure was defined as retearing of the reconstructed gap threshold due to rupture of the tendon and/or failure of the knots or anchors. After biomechanical testing, bone quality was measured at the footprint of the subscapularis using microCT in all specimens. Bone quality was equal between both groups. To detect a minimum 0.15-mm difference in gap formation between the two repair techniques (with a 5% level of significance; α = 0.05), eight matched pairs (n = 16 in total) were calculated as necessary to achieve a power of at least 90%.

RESULTS

The first study question can be answered as follows: for stiffness under cyclic load, there were no differences with the numbers available between the knotted and knotless groups at load stages of 10 N to 60 N (32.7 ± 3.5 N/mm versus 34.2 ± 5.6 N/mm, mean difference 1.5 N/mm [95% CI -6.43 to 3.33]; p = 0.55), 10 N to 100 N (45.0 ± 4.8 N/mm versus 45.2 ± 6.0 N/mm, mean difference 0.2 N/mm [95% CI -5.74 to 6.04]; p = 0.95), and 10 N to 180 N (58.2 ± 10.6 N/mm versus 55.2 ± 4.7 N/mm, mean difference 3 N/mm [95% CI -5.84 to 11.79]; p = 0.48). In relation to the second research question, the following results emerged: For cyclic gapping, there were no differences between the knotted and knotless groups at any load levels. The present study was able to show the following with regard to the third research question: Between knotted and knotless repairs, there were no differences in maximal load stiffness (45.3 ± 8.6 N/mm versus 43.5 ± 10.2 N/mm, mean difference 1.8 [95% CI -11.78 to 8.23]; p = 0.71), yield load (425.1 ± 251.4 N versus 379.0 ± 169.4 N, mean difference 46.1 [95% CI -276.02 to 183.72]; p = 0.67), and failure load (521.1 ± 266.2 N versus 475.8 ± 183.3 N, mean difference 45.3 [95% CI -290.42 to 199.79]; p = 0.69). Regarding the fourth question concerning the failure modes, in the knotted repairs, the anchor tore from the bone in 2 of 8, the suture tore from the tendon in 6 of 8, and no suture slipped from the eyelet; in the knotless repairs, the anchor tore from the bone in 2 of 8, the suture tore from the tendon in 3 of 8, and the threads slipped from the eyelet in 3 of 8.

CONCLUSION

With the numbers available, we found no differences between single-anchor knotless and knotted reconstruction techniques used to repair full-thickness tears of the upper portion of subscapularis tendon.

CLINICAL RELEVANCE

The reconstruction techniques we analyzed showed no differences in terms of their primary stability and biomechanical properties at the time of initial repair and with the numbers available. In view of these experimental results, it would be useful to conduct a clinical study in the future to verify the translationality of the experimental data of the present study.

High Critical Shoulder Angle Values Are Associated With Full-Thickness Posterosuperior Cuff Tears and Low Values With Primary Glenohumeral Osteoarthritis

PURPOSE

To compare critical shoulder angle (CSA) measurements using high-quality radiographs in the following groups: Group 1: symptomatic atraumatic full-thickness rotator cuff (RC) tears; Group 2: symptomatic primary glenohumeral osteoarthritis (GHOA); and Group 3: no RC tear or primary GHOA being treated for glenohumeral instability or symptomatic labral pathology (control group).

METHODS

A prospective observational case control study with 10 shoulders in each group was performed GHOA and full-thickness RC tears were diagnosed by radiographs and magnetic resonance imaging (MRI). For these three groups, the exclusion criteria were the following: Group 1) partial thickness RC tears, traumatic RC tears, isolated subscapularis tears, and advanced cuff tear arthropathy with erosion of the superior glenoid; Group 2) secondary causes of glenohumeral arthritis; coexistent full-thickness RC tear; and Group 3) glenoid bone lesions that may affect the CSA measurement. Only shoulders with adequate radiographic quality (Suter-Henninger type A and C) were eligible. A one-way ANOVA, followed by Tukey multiple pairwise-comparisons test, was performed to compare the groups. Interobserver and intraobserver reliability was assessed using Intraclass Correlation Coefficients (ICC).

RESULTS

Mean CSA values were 37.4° ± 4.7 (RC tear group), 28.9° ± 2.4 (GHOA group), and 32.8° ± 1.1 (control group). The CSA of the RC group was higher than the control group (P = .006) and the GHOA group (P = .000). The CSA of the GHOA group was lower than the control group (P = .027). Intraobserver and interobserver reliabilities for the CSA measurement were excellent (Observer 1 [ICC]: .986 [95% CI .970-.993]; Observer 2 [ICC]: .976[95% CI .951-.989]; and Observer 1v2: 0.968[95% CI .933-.985]).

CONCLUSIONS

There is a difference in the CSA between patients with symptomatic atraumatic full-thickness RC tears (4.6° higher than the control group), symptomatic GHOA (3.8° lower than the control group), and glenohumeral instability or labral pathology with no RC tear or GHOA.

LEVEL OF EVIDENCE

Level 2, prospective observational case control diagnostic study.

Critical shoulder angle (CSA): age and gender distribution in the general population

Objective

Anatomical parameters and pathologies that can affect the critical shoulder angle (CSA) are subjects of discussion. To date, we do not know if the CSA value changes in the different decades of life in a population characterized by the same ethnicity, nor if there are differences related to gender or side. This study hypothesizes that age and gender may affect the CSA.

Methods

Patients older than 15 years old affected by a shoulder trauma and who were discharged with a diagnosis of shoulder contusion were enrolled. A true AP view of the shoulder was obtained as well as data regarding age and gender of all participants. The CSA was measured by three authors, and interoperator reliability was assessed. Eight subcategories, according to decades of life, were considered. Finally, the studied population was divided into three subcategories according to CSA values (< 30°; 30–35°; ≥ 35°).

Results

The initial sample comprised 3587 shoulder X-rays. The interobserver reproducibility was high, with an intraclass correlation coefficient of 0.865 (95% CI 0.793–0.915).

Two thousand eight hundred seventy-three radiograms were excluded. The studied group comprised 714 patients [431 females, 283 males; mean age (SD): 47.2 (20.9) years, range: 11–93 years]. The mean CSA was 33.6° (range: 24–50°; SD: 3.9°). The mean CSA values in females and males were 33.7°and 33.5°, respectively. The mean CSA values of the right and left shoulders were 33.3° and 33.9°, respectively (p > 0.05). Linear regression analysis showed a CSA increase by 0.04° every year. The mean CSA in subjects aged between 15 and 19 years was significantly lower than all the other groups, except for patients older than 80 years.

No significant differences were found between CSA subcategories, gender, or side.

Conclusions

In the general population, the mean CSA value was 33.6°. No significant differences were found regarding the mean CSA value according to gender or side. A significant positive linear correlation between CSA and age was detected. In each decade of life, the CSA value, which is genetically determined, shows a large variability.

Level of evidence: IV.

Accuracy of Critical Shoulder Angle and Acromial Index for Predicting Supraspinatus Tendinopathy

Critical shoulder angle (CSA) is the angle between the superior and inferior bony margins of the glenoid and the most lateral border of the acromion. The acromial index (AI) is the distance from the glenoid plane to the acromial lateral border and is divided by the distance from the glenoid plane to the lateral aspect of the humeral head. Although both are used for predicting shoulder diseases, research on their accuracy in predicting supraspinatus tendinopathy in patients with shoulder pain is limited. Data were retrospectively collected from 308 patients with supraspinatus tendinopathy between January 2018 and December 2019. Simultaneously, we gathered the data of 300 patients with shoulder pain without supraspinatus tendinopathy, confirmed through ultrasound examination. Baseline demographic data, CSA, and AI were compared using the independent Student’s t test and Mann–Whitney U test. Categorical variables were analyzed using the chi-square test. A receiver operating characteristic curve (ROC) analysis was performed to investigate the accuracy of CSA and AI for predicting supraspinatus tendinopathy, and the optimal cut-off point was determined using the Youden index. No statistical differences were observed for age, sex, body mass index, evaluated side (dominant), diabetes mellitus, and hyperlipidemia between the groups. The supraspinatus tendinopathy group showed higher CSAs (p < 0.001) than did the non-supraspinatus tendinopathy group. For predicting supraspinatus tendinopathy, the area under the curve (AUC) of ROC curve of the CSA was 76.8%, revealing acceptable discrimination. The AUC of AI was 46.9%, revealing no discrimination. Moreover, when patients with shoulder pain had a CSA > 38.11°, the specificity and sensitivity of CSA in predicting supraspinatus tendinopathy were 71.0% and 71.8%, respectively. CSA could be considered an objective assessment tool to predict supraspinatus tendinopathy in patients with shoulder pain. AI revealed no discrimination in predicting supraspinatus tendinopathy in patients with shoulder pain.

The Influence of Critical Shoulder Angle in Secondary Rotator Cuff Failure After Shoulder Replacement: An Age- and Sex-Matched Case-Control Study

Introduction

Decreased or increased critical shoulder angles (CSA) are associated with osteoarthritis or rotator cuff failure respectively. Secondary cuff failure after shoulder arthroplasty is disabling and often requires additional surgery. The aim of this study was to investigate if the initial CSA correlated with cuff failure in the context of shoulder arthroplasty.

Methods

Patients from a tertiary referral centre were reviewed from 2011-2017. Those who underwent revision from hemiarthroplasty (HA) or anatomic total shoulder arthroplasty (TSA) to a reverse shoulder arthroplasty (RSA) following rotator cuff failure were compared to an age and sex-matched control group. The CSA was calculated from initial pre-operative radiographs.

Results

In this study, 16 patients with symptomatic cuff failure after anatomic TSA or HA requiring revision to RSA were compared to a control group of 16 age- and sex-matched patients showing no signs of symptomatic cuff failure. The median CSA in the study group was significantly greater than that of the control group (31.5^o, IQR = 29.8 - 36.1^o vs. 29.5^o, IQR = 27.6 - 30.4^o; p= 0.026).

Conclusion

The difference in CSA between those who required revision for secondary cuff failure than those who didn’t suggest that pre-operative measurement of CSA may help guide surgical planning in shoulder arthroplasty.

Is shoulder geometry important for rotator cuff tears?

PURPOSE

This study is aiming to evaluate some specific anatomic shoulder parameters such as the lateral acromial angle (LAA), acromial index (AI), coracohumeral distance (CHD) and critical shoulder angle (CSA) in rotator cuff tears.

METHODS

A total of 100 cases consisting of 50 patients with rotator cuff tears and 50 patients without rotator cuff tears, who underwent shoulder MRI (mangnetic resonance imaging) examination in Istanbul Medipol University Orthopedics and Traumatology Department, participated in this study. In this retrospective study, CCA, LAA, AI and CSA were evaluated in MRI in order to shed light on the theories of rotator cuff tears.

RESULTS

There was no significant difference (P ˃ .05) in acromial index and coracohumeral distance in the patient group. Lateral acromial angle and critical shoulder angle were significantly different in the patient group compared to the control group (P < .05). There was a weak negative correlation between CSA and CHD.

CONCLUSION

In our study, we found that patients with smaller LAA and higher CSA values in MRI images are prone to have rotator cuff tears. Further studies are needed in order to evaluate whether this association has predictive value.

Magnetic resonance imaging of deltoid muscle/tendon tears: a descriptive study

OBJECTIVE

To describe the MRI features of deltoid tears and to evaluate tear characteristics in patient groups based on history of trauma and rotator cuff tear (RCT).

MATERIALS AND METHODS

The records of patients who underwent shoulder MRI at our institution between July 2007 and June 2018 were retrospectively reviewed to identify deltoid tears, and patients were divided into groups based on history of recent trauma and presence of RCT. Images were reviewed to identify the location and size of the deltoid tear; the presence or absence of RCT, muscle atrophy, tendon retraction, humeral head subluxation, soft tissue edema, and additional pathologies were also noted. Medical records were reviewed for information about history of steroid injection, previous rotator cuff surgery, and treatments used.

RESULTS

Among 69 patients with deltoid tears (45 men; mean age, 65.2 years; range, 19-89 years), patients with RCTs and no trauma had the highest frequency of deltoid tears in the middle portion (p = 0.005). Only patients with RCTs had undergone steroid injection or rotator cuff surgery. Two patients had deltoid tear without RCT and without recent trauma; these patients demonstrated evidence of calcific tendinopathy and chronic subacromial-subdeltoid bursitis.

CONCLUSION

The middle (acromial) portion of the deltoid is more frequently affected in patients with RCTs than in those with trauma. Although deltoid tears are commonly associated with RCT, calcific tendinopathy and chronic bursitis may also be seen in patients with deltoid tears.

The association between acromial anatomy and articular-sided partial thickness of rotator cuff tears

Background

Acromial anatomy has been found to be correlated with degenerative full-thickness rotator cuff tears in current studies. However, research on the relationship between acromial anatomy and articular-sided partial thickness of rotator cuff tears (PTRCTs) is still lacking. The purpose of this study was to evaluate whether these imaging graphic parameters exhibit any association between acromial anatomy and degenerative articular-sided PTRCTs.

Methods

Between January 2016 and December 2018, a total of 91 patients without a history of trauma underwent arthroscopy as an articular-sided PTRCT group. In the control group, with age- and sex-matched patients, we selected 91 consecutive outpatient patients who underwent shoulder magnetic resonance imaging (MRI) because of shoulder pain and an MRI diagnosis of only synovial hyperplasia and effusion. MRI was used to measure the acromial type, acromiohumeral distance (AHD), lateral acromial angle (LAA), acromion index (AI), and critical shoulder angle (CSA) by 2 independent observers.

Results

The acromion type, AHD and LAA showed no difference between degenerative articular-sided PTRCTs and controls (P = 0.532, 0.277, and 0.108, respectively). AI and CSA were significantly higher in degenerative articular-sided PTRCTs (P = 0.002 and 0.003, respectively). A good correlation was found between AI and CSA to measurement(Pearson correlation coefficient = 0.631).

Conclusions

Our study revealed that higher AI and CSA were found in degenerative articular-sided PTRCTs. Acromial anatomy with a large acromial extension was associated with the occurrence of degenerative articular-sided PTRCTs.

Radiographic shoulder parameters and their relationship to outcomes following rotator cuff repair: a systematic review

BACKGROUND

Anatomic parameters, such as the critical shoulder angle and acromion index, have emerged as methods to quantify scapular anatomy and may contribute to rotator cuff pathology. The purpose of this paper is to investigate the published literature on influences of scapular morphology on the development of re-tears and patient-reported outcomes following rotator cuff repair.

METHODS

A systematic review of the Embase and PubMed databases was performed to identify published studies on the potential influence of scapular bony morphology and re-tear rates and patient-reported outcomes after rotator cuff repair. Studies were reviewed by two authors.

RESULTS

A total of 615 unique titles and 49 potentially relevant abstracts were reviewed, with eight published manuscripts identified for inclusion. Two of three papers reported no relationship between these acromion index and rotator cuff re-tear rate, while one paper found an increased re-tear rate. All three studies on critical shoulder angle found a significant association between critical shoulder angle and cuff re-tear rate. There was no clear relationship between any bony morphologic measurement and patient-reported outcomes after rotator cuff repair.

CONCLUSIONS

Rotator cuff re-tear rate appears to be significantly associated with the critical shoulder angle and glenoid inclination, while not clearly associated with acromial morphologic measurements.

Are any radiologic parameters independently associated with degenerative postero-superior rotator cuff tears?

BACKGROUND

Several radiologic parameters representing scapular morphology have been proposed as risk factors for degenerative posterosuperior rotator cuff tear (PSRCT). The causes of PSRCT are multifactorial; many reported risk factors are compound entities. However, no determination, made after adjustment with previously reported risk factors, of which radiologic parameters are independent risk factors for degenerative PSRCT, has been reported. Therefore, this study's purpose was to determine which radiologic parameters representing scapular morphology are independent risk factors for degenerative PSRCT in a general population after adjustment with previously suggested risk factors.

METHODS

This study involved 629 subjects (629 shoulders) drawn from a cohort of rural residents. PSRCT diagnoses were based on magnetic resonance imaging findings. Logistic regression analysis was used to determine the odds ratios and 95% confidence intervals for the following variables: sex, age, height, weight, waist circumference, dominant-side involvement, smoking, alcohol consumption, manual labor, diabetes, hypertension, metabolic syndrome, thyroid dysfunction, serum lipid profile, high-sensitivity C-reactive protein, and radiologic parameters. The evaluated radiologic parameters were the superior displacement of the humeral head (SDHH) and those representing the scapular morphology. The radiologic parameters representing the scapular morphology were lateral acromial angle, acromial slope, acromial tilt, acromial index, and critical shoulder angle (CSA). Univariate logistic regression analyses for all variables, as well as multivariable logistic regression analyses for variables with significant associations and clinical effect sizes in the univariate logistic regression analyses, were performed. In order to determine the cutoff value for significant radiologic parameters, each pair of candidate cutoff values was obtained as follows: 1 candidate, as the lowest significant ordinal value in a univariate analysis, and the other candidate, according to a receiver operating characteristic curve analysis. Then, the cutoff values were determined by selecting the value in each candidate pair that had the larger area under the receiver operating characteristic curve, using the DeLong test.

RESULTS

In the multivariable analyses, CSA was significantly associated with degenerative PSRCT after controlling for the following factors: age, waist circumference, dominant-side involvement, manual labor, diabetes, metabolic syndrome, hypo-high-density lipoproteinemia, and SDHH (P ≤ .033). CSA (odds ratio, 1.58 [95% confidence interval, 1.45-1.72]; P < .001) was the only significantly associated radiologic parameter among the studied radiologic parameters representing scapular morphology.

CONCLUSION

CSA (≥35°) is an independent associated factor for degenerative PSRCT after adjustment for the following suggested risk factors: age, waist circumference, dominant-side involvement, manual labor, diabetes, metabolic syndrome, hypo-high-density lipoproteinemia, and SDHH.

The critical shoulder angle does not change over time: a radiographic study

BACKGROUND

The anatomy of the scapula may predispose individuals to develop shoulder pathologies. The purpose of this study was to determine if the scapular anatomy, in particular the critical shoulder angle (CSA), changes over a long-term follow-up, or if it is a stable parameter. We hypothesized that increasing age would not influence the scapular morphology.

METHODS

We analyzed shoulder radiographs in our database from 2002 to 2019 to extract radiographs at an interval of at least 10 years. Radiographic analysis included measuring the CSA and assessing the acromion type according to Bigliani and Morrison, the posterior acromial height and the posterior acromial tilt.

RESULTS

A total of 41 patients (47 shoulders) with a mean age of 53 years (range, 15-76; standard deviation [SD], ±14) fulfilled the inclusion criteria. The mean interval between the 2 sets of radiographs was 12 years (range, 10-16; SD ±2).The mean CSA did not change significantly with 34° (range, 20-41; SD ±4) at the first and 34° (range, 19-44; SD ±5) (P = .597) at the second assessment. On the initial lateral radiographs ("Neer view"), there were 11 type 1 (24%), 32 type 2 (70%), and 3 type 3 (6%) acromia according to Bigliani and Morrison. At the second assessment, there were 16 type 1 (34%), 28 type 2 (60%), and 3 type 3 (7%). Between both sets of radiographs, 11 were different (23%), without a trend in the type of change being discernible. The posterior acromial height was stable with 19 mm (range, 2-36; SD ±8) at the first and 18 mm (range, 5-38; SD ±8) at the second assessment (P = .186). The posterior acromion tilt changed from 59° (range, 34-81; SD ±10) to 62° (range, 30-81; SD ±10) (P < .001). Among 6 cases with rotator cuff tears (RCTs) already at the first assessment, the CSA did not change significantly at 10 years' follow-up (P = .414). Among the 10 cases with new RCTs at the second assessment, the CSA did not change significantly at 10 years' follow-up from 34° (range, 25-41; SD ±5) to 35° (range, 24-44; SD ±6) (P = .510). In the group of 31 shoulders without RCT, the mean CSA at the first assessment of 34° (range, 28-41; SD ±3) stayed also stable with 34° (range, 28-40; SD ±3) (P = .796).

CONCLUSION

The CSA is an anatomical parameter of the scapula that does not change in size after closure of the physes.

The acromiohumeral distance in the MRI should not be used as a decision criterion to assess subacromial space width in shoulders with an intact rotator cuff

PURPOSE

The acromiohumeral distance is in practice often evaluated on MRI by radiologists and a reduction diagnosed as subacromial impingement. However, the acromiohumeral distance as indicator for a decentered glenohumeral joint is defined on a true AP radiograph with the patient standing or sitting. The present study therefore evaluated the influence of the patient position by comparing the acromiohumeral distance in both modalities in shoulders with an intact rotator cuff.

METHODS

On MRI images and true AP radiographs of patients > 20 and < 80 years with an intact rotator cuff the acromiohumeral distance was measured. The maximum cranio-caudal size of the glenoid was measured as a reference to allow a direct comparison of both modalities.

RESULTS

Two-hundred and thirty-four shoulders (mean patients age 45.8 ± 14.3 years) were included. The mean acromiohumeral distance/glenoid size ratio of all shoulders was significantly larger (P < 0.0001) on the MRI with 4.6 ± 1.0 in comparison to 4.1 ± 0.9 in the radiographs indicating a smaller acromiohumeral distance on the MRI. In absolute values, a mean acromiohumeral distance of 9.2 mm ± 1.8 on MRI in comparison to 10.4 mm ± 2.4 on the radiographs was calculated. Herewith, the acromiohumeral distance in the MRI was in the average 1.2 mm ± 2.1 (13%) smaller than the in corresponding radiographs (P < 0.0001).

CONCLUSION

The acromiohumeral distance is significantly smaller in the MRI in comparison to AP radiographs in shoulders with an intact rotator cuff and should not be used as a decision criterion on MRI to assess glenohumeral centering or subacromial space width.

LEVEL OF EVIDENCE

IV.

WITHDRAWN: Higher coracoacromial ligament thickness, critical shoulder angle and acromion index are associated with rotator cuff tears in patients who undergo arthroscopic rotator cuff repair

PURPOSE

To evaluate the effect of several shoulder anatomical parameters in the development of rotator cuff tear (RCT).

METHODS

Between 2014 and 2018, all consecutive patients who underwent arthroscopic rotator cuff repair due to full-thickness rotator cuff tear with a minimum 2-year follow-up were identified. Inclusion criteria were (1) age>18 years, (2) patients with degenerative RCT, (3) full-thickness RCTs, (4) patients underwent arthroscopic RCR due to unresponsive conservative treatment, (5) minimum 2-year follow-up period. Exclusion criteria were traumatic RCT, history of previous shoulder surgery, shoulder deformity, neurologic or neuromuscular dysfunction, glenohumeral and/or acromioclavicular joint arthritis, cuff-tear arthropathy, history of fracture around shoulder and inadequate or low-quality magnetic resonance images (MRI). Acromion index (AI), Critical shoulder angle (CSA), Coracoacromial ligament (CAL) thickness, Subacromial space (SS) width, Acromiohumeral distance (AHD), CAL/SS ratio, Lateral acromial angle (LAA) and glenoid version angle (GVA) parameters were measured on MRI. Intra- and interobserver reliability were measured. Regression analysis was used to evaluate the association between anatomical parameters and RCT development. Receiver operating curves (ROC) were created for independent risk factors. The correlation between measurement parameters were evaluated.

RESULTS

There were 1029 patients met the inclusion criteria. After exclusions, 437 patients were included. Age- and sex matched 437 patients without any shoulder pathologies were selected as control group. There was almost perfect intra- (ICC>0.85) and interobserver (ICC> 0.81) reliability regarding all measurement parameters. There was significant difference between RCT group and control group regarding AI (0.67±0.07 vs. 0.61±0.08, p<0.001), CSA (33.58±3.93 vs. 31.50±4.01, p<0.001), CAL thickness (1.81±0.64 vs. 1.53±0.50, p<0.001), CAL/SS ratio (0.29±0.14 vs. 0.23±0.10, p<0.001) and GVA (-16.69±6.69 vs. -15.37±5.95, p=0.002) parameters. AI (OR: 1.998, P<0.001), CAL thickness (OR: 2.801, p<0.000) and CSA (OR: 3.055, p<0.001) were found to be independently associated with the increased risk of RCT development. Area under curve (AUC) of the AI, CSA, and CAL thickness were 71.4%, 71.3%, and 70.2%, respectively. Cut-off values for AI, CSA, and CAL thickness were 0.62, 36.4° and 1.47 mm, respectively. There was significantly positive strong correlation between AI and CSA (p<0.001, r=0.814).

CONCLUSION

Higher AI, CSA and CAL thickness independently associated with full-thickness RCT development. In clinical practice, these parameters may be useful in the prediction of rotator cuff rupture.

The relationship between rotator cuff integrity and acromiohumeral distance following open and arthroscopic rotator cuff repair

Background: Acromiohumeral distance (AHD) has become both a diagnostic and prognostic parameter related to rotator cuff pathology which is always measured in a 2-dimensional plane. The purposes of this study were (1) to evaluate the regional AHD with MRI following open and arthroscopic rotator cuff repair and, (2) to investigate its association to the rotator cuff integrity following medium to large size rotator cuff repair with open and arthroscopic manner. Methods: A retrospective review of 112 patients who were treated for full-thickness medium to large size rotator cuff tears either by open repair (open group) or arthroscopic repair (arthroscopic group) was done. All patients included in the study are those with at least 12 and 18 months for the post-operative MRI and clinical follow-up. Propensity score matching was used to select controls matched for age, sex, body mass index, tear size, and affected site. There were 56 patients in each group with a mean age of 63.3 years (range, 50 to 77 years). The post-operative functional and radiologic outcomes for both groups were compared. AHD was measured at three regions of interest (ROI) with MRI and compared pre-and post-operatively. Results: AHD was significantly greater in the open group when measured at the anterior third of the lateral acromion border compare to the arthroscopic group (p = 0.005). The re-tear rate was affected by AHD at the anterior third of the lateral border of the acromion for the arthroscopic and open group (p = 0.021, p = 0.029). The AHD measured at the anterior and middle third of lateral acromion border were significantly greater in healed compared to the re-tear rotator cuff group (p = 0.019, p = 0.022). Conclusions: Open rotator cuff repair showed greater AHD at the anterior third of the lateral border of the acromion. Regional AHD measured at anterior third of the lateral border of acromion significantly associated with rotator cuff integrity following repair. Level of evidence: propensity-matched case-control (Level II)

Footprint size matters: wider coronal greater tuberosity width is associated with increased rates of healing after rotator cuff repair

Background

The purpose of this study was to determine whether greater tuberosity morphology (1) could be measured reliably on magnetic resonance imaging (MRI), (2) differed between patients with rotator cuff tears (RCTs) compared with those without tears or glenohumeral osteoarthritis, or (3) differed between patients with rotator cuff repairs (RCR) who healed and those that did not.

Methods

This is a retrospective comparative study. (1) We measured greater tuberosity width (coronal and sagittal), lateral offset, and angle on MRI corrected into the plane of the humerus. To determine reliability, these measurements were made by two observers and intraclass correlation coefficients were calculated. (2) We compared these measurements between patients with a full-thickness RCT and patients aged >50 years without evidence of a RCT or glenohumeral osteoarthritis. (3) We then compared these measurements between those patients with healed RCRs and those with evidence of retear on MRI. In this portion, we only included patients with both a preoperative and postoperative MRI at least 1 year from RCR. Postoperative MRIs were obtained to assess healing rates, not because of concern for failure. Those without tendon defects were considered healed.

Results

(1) In a validation cohort of 50 patients with MRI, all inter-rater intraclass correlation coefficients were greater than 0.75. (2) There were no differences between our RCT group of 110 patients and our comparison group of 100 patients in tuberosity coronal width, sagittal width, or lateral offset. The RCT group had a significantly smaller greater tuberosity angle (63 ± 4° vs 65 ± 5°, P = .003). (3) In our group of 110 RCRs, postoperative MRI scans were obtained at a mean follow-up of 23.6 ± 15.7 months showing 84 (76%) patients had healed RCRs. Larger coronal tuberosity width was associated with healing (1.3 ± 0.2 vs 1.2 ± 0.2 cm, P = .032), as was smaller tear width (P < .001), and retraction (P < .001). When coronal width was dichotomized, there was a significantly higher healing rate with a width over 1.2 cm (85 vs 66%, P = .02). No other greater tuberosity morphological characteristics were associated with RCR or postoperative healing.

Conclusion

RCTs do not appear to be associated with greater tuberosity morphology. Postoperative rotator cuff healing based on MRI is 76%. Higher rates of healing occur with a wider coronal tuberosity width (ie, rotator cuff tendon footprint). Consideration could be given to widening the footprint intraoperatively in an effort to improve healing rates although this remains to be validated.

Relationship between the morphology of the greater tuberosity and radiological and clinical outcomes after arthroscopic rotator cuff repair

Background

Degenerative greater tuberosity (GT) changes are often associated with rotator cuff tears. However, little is known about the impact of GT morphology on surgical outcomes. The aim of this study was to examine the relationship between clinical and radiological outcomes, after rotator cuff repair, and GT morphology.

Methods

We retrospectively investigated shoulders that underwent arthroscopic repair of nontraumatic full-thickness supra-/infraspinatus tears. The exclusion criteria were a lack of either radiographs or magnetic resonance images, revision surgery, partial repair, complications such as infection or dislocation, and follow-up < 2 years. GT morphology on radiographs was classified into 5 groups: normal, sclerosis, bone spur, roughness, and femoralization. The acromiohumeral interval (AHI) was measured on anteroposterior radiographs. Fatty degeneration of the cuff muscles was evaluated using the global fatty degeneration index (GFDI). Postoperative cuff integrity was classified using Sugaya's classification at 2 years after surgery. Clinical outcomes were assessed preoperatively and at postoperative 2 years with the Japanese Orthopaedic Association score and the University of California, Los Angeles shoulder rating scale.

Results

The study included 220 shoulders in 212 patients (104 men and 108 women), with a mean age of 66 years (range 43-85). The mean follow-up period was 28 months (range, 24-60 months). Seven shoulders (3.2%) were classified as normal, 65 (29.5%) as sclerosis, 55 (25.0%) as bone spur, 78 (34.5%) as roughness, and 15 (6.8%) as femoralization. The preoperative AHI, in the roughness and femoralization groups, was significantly smaller than that in the sclerosis (P < .01) and bone spur groups (P < .001). The roughness and femoralization groups had a greater number of large tears (P = .006). In the roughness and femoralization groups, mean GFDI was significantly higher than that in the sclerosis group (P < .001 for both). Repaired cuff integrity was not different between all groups, respectively. Both Japanese Orthopaedic Association and University of California, Los Angeles scores improved postoperatively from 73.3 to 95.6 points and 18.2 to 34.0 points (P < .001 for both), respectively, and there were no significant differences between all groups, respectively.

Conclusion

Roughness or femoralization of the GT was related to larger tears, with smaller AHI and higher GFDI. Repaired cuff integrity and clinical outcomes in shoulders with roughness or femoralization of the GT were not inferior to shoulders with the other types of GT morphologies in this study. Arthroscopic repair can be indicated for shoulders with advanced changes of the GT, if fatty degeneration of the cuff muscles is not severe.

Definition of the terms "acute" and "traumatic" in rotator cuff injuries: a systematic review and call for standardization in nomenclature

BACKGROUND

Although of high relevance for clinical decision making, there exists no consensus throughout the literature of the terms "acute" and "traumatic" used in the classification of rotator cuff tears. With differing definitions, the comparability of outcome studies may be limited. The aim was to provide a detailed systematic review of the definitions used in the literature and present a suggestion for a standardization in nomenclature based on the findings.

METHODS

Four different internet databases were searched in February 2020 using the terms ("acute" OR "traumatic" OR "trauma" OR "athlete" OR "young") AND ("rotator cuff tears" OR "rotator cuff tear" OR "rotator cuff" OR "rotator cuff rupture" OR "supraspinatus" OR "infraspinatus" OR "subscapularis" OR "teres minor"). Prospective, retrospective, cohort and case-control studies as well as case series were included. Systematic reviews, cadaveric or laboratory studies and studies on non-traumatic or non-acute rotator cuff tears were excluded.

RESULTS

The literature search conducted 10,349 articles of which 10,151 were excluded based on the title, 119 based on the abstract and 33 based on the manuscript. A total of 46 studies were finally included for review and subsequently analyzed. Overall, there exists no consensus neither on the term "acute" nor on "traumatic" in the context of rotator cuff tears in the literature. The time span for acute injuries ranged between 2 weeks and 6 months. For traumatic injuries, only 20% of the selected studies described a specific and adequate injury mechanism in combination with adequate imaging.

CONCLUSION

The term "acute" should be reserved for RCT showing muscle edema, wavelike appearance of the central part of the torn tendon and joint effusion, which typically requires adequate imaging within 2 weeks from trauma. Repair of acute tears should occur within 8 weeks from trauma to benefit from possibly superior biological healing capacities. The term "traumatic" should be used for a sudden onset of symptoms in a previously asymptomatic patient, triggered by an adequate trauma, e.g., a fall on the retroverted arm with an axial cranioventral force or a traumatic shoulder dislocation.

Neither critical shoulder angle nor acromion index were related with specific pathology 20 years later!

PURPOSE

The critical shoulder angle (CSA) and the acromion index (AI) are measurements of acromial shape reported as predictors of degenerative rotator cuff tears (RCT) and glenohumeral osteoarthritis (GH OA). Whether they are the cause or effect of shoulder pathologies is uncertain since pre-morbid radiographs most often are lacking. The main aim of this study was to investigate if CSA or AI were related to the development of RCT or GH OA after 20 years. A secondary aim was to investigate if the CSA and AI had changed over time.

METHODS

In the hospital archive, 273 preoperative plain shoulder radiographs were found of patients scheduled for elective surgery other than cuff repair and arthroplasty. Forty-five images fulfilled the strict criteria published by Suter and Henninger (2015) and were used to measure CSA and AI with two independent assessors. No patient had any sign of OA in the index radiographs or any information in the medical records indicating RCT. After a median of 20 (16-22) years, 30 of these patients were radiologically re-examined with bilateral true frontal views and ultrasound of the rotator cuff. There were 19 men (20 study shoulders) and 11 females (12 study shoulders).

RESULTS

Mean age at follow-up was 56 (32-78) years. There was no correlation between CSA (r = 0.02) (n.s) or AI (r = - 0.13) (n.s) in the primary radiographs and OA at follow-up. Nor was any correlation found between index CSA (r = 0.12) (n.s) or AI (r = - 0.13) (n.s) and RCT at follow-up. Mean difference in CSA was - 1.7 (- 10-3) degrees and mean AI difference was - 0.04 (- 0.13-0.09) between the first and the second radiographs, 20 years later. Bilaterally, mean CSA was 32 and AI 0.61 at follow-up.

CONCLUSION

In this study, no correlation between the CSA, AI and development of OA or RCT could be found. The mean CSA and AI decreased over a 20-year period but the difference was very small. No difference was found between the study shoulders and the contralaterals. These findings question previously reported etiological associations between scapular anatomy and the development of OA or RCT and thereby the use of these calculations as the basis of treatment.

LEVEL OF EVIDENCE

III.

The acromion-greater tuberosity impingement index: A new radiographic measurement and its association with rotator cuff pathology

PURPOSE

Several radiographic parameters describe humeral head coverage by the acromion. We describe a new radiographic measurement, the acromion-greater tuberosity impingement index (ATI), and its ability to predict rotator cuff pathology.

METHODS

The ATI was measured with magnetic resonance imaging (MRI) and X-ray analysis in 83 patients with rotator cuff pathology and 76 patients with acute rotator cuff tears. The lateral acromial angle (LAA), acromion type, the acromion index (AI) and the critical shoulder angle (CSA) were measured to assess their correlations with the ATI. Receiver operating characteristic (ROC) curves were used to predict degenerative rotator cuff pathology. The change in the ATI after acromion surgery was evaluated in both groups.

RESULTS

According to the ROC curves, the ATI is a good predictor of degenerative rotator cuff pathology on both X-ray (cut-off, 0.865) and MRI (cut-off, 0.965). Patients with degenerative rotator cuff pathology had a significantly higher average ATI compared to the trauma group (p = 0.001 for X-ray and MRI). The degenerative group had a significantly lower LAA (p = 0.001) and a higher ratio of type III acromion (p = 0.035) than the trauma group. The ATI on X-ray was negatively related to the LAA and positively related to the AI, the CSA and acromion type (each p < 0.05). The ATI on MRI was negatively related to the LAA and positively related to the AI and acromion type (each p <0.05). More patients in the degenerative group than the trauma group needed acromioplasty or acromion decompression (p < 0.05). The ATI on MRI was significantly lower after acromion surgery compared to before surgery in both groups (p < 0.05).

CONCLUSION

The ATI is a good predictor of degenerative supraspinatus tendon tears or subacromial impingement syndrome. The ATI on MRI is more accurate and can precisely guide acromion surgery.

Effect of arthroscopic acromioplasty on reducing critical shoulder angle: a protocol for a prospective randomized clinical trial

Background

The critical shoulder angle (CSA), which helps to predict patients who are at risk of rotator cuff tears (RCTs) with large degree and who are susceptible to osteoarthritis with low angle, has been identified as one of the most vital acromial parameters; anterolateral and lateral acromioplasties have been proven to be valid ways to reduce CSA. However, no study has compared the effect of different acromioplasties on the reduction of the large CSA (≥33°) clinically. Additionally, either anterolateral or lateral acromioplasty could not precisely correct large CSAs to a favorable range (30–33°) in each patient. Thus, we will propose a novel precise acromioplasty technique for the purpose of reducing CSA accurately and effectively, and compare the effectiveness of different acromioplasties on the reduction of the CSA.

Methods

A total of 60 RCT patients who have indications for arthroscopic rotator cuff repair and with pre-operative CSA ≥33° will be recruited in outpatient center of Sun Yat-sen Memorial Hospital. Eligible participants will be randomly allocated to Group A (anterolateral acromioplasty), Group B (lateral acromioplasty) or Group C (precise acromioplasty) via a random, computer-generated number system. Three surgical plans will be made for each participant respectively by one professional surgeon according to the results of randomization allocation. The post-operative CSA will be measured 2 days post-operation. Follow-up will be maintained at 3, 6, and 12 months after surgery including the visual analog scale score, the University of California at Los Angeles score, the Constant Shoulder Score and the American Shoulder and Elbow Surgeon Shoulder Assessment Form. Finally, all outcomes will be assessed by two researchers who are blinded to the recruitment and allocation.

Discussion

This is the first clinical trial to evaluate the impact of different acromioplasties on the reduction of the CSA. Additionally, this study will provide a new precise acromioplasty technique, which is a novel precision and individualized treatment to prevent degenerative RCTs by reducing the CSA.

Trial registration

ChiCTR2000032343. Registered on April 26th, 2020.

Feasibility of the acromion index as a reference of severity of stratified supraspinatus tendon injury: a secondary analysis

BACKGROUND

The acromion index (AI) is the acromial lateral extension above the head of the humerus. Some researchers have advocated that the AI indicates the severity of the tear size of the full-thickness supraspinatus tendon.

PURPOSE

To validate the reproducibility of the AI between shoulder magnetic resonance imaging (MRI) and standard X-ray and to verify whether the AI is a useful index for stratifying the severity of supraspinatus tendon injuries, as well as full-thickness tears.

MATERIAL AND METHODS

We enrolled 200 patients with impingement syndrome who were subsequently evaluated with standard X-ray of the shoulder in the anteroposterior view, as well as an MRI. We performed a pilot study to validate the reproducibility of the AI using standard X-ray and MRI, and to compare the AI between these imaging modalities. The severity of supraspinatus tendon injury was classified into four groups (0 = no evidence of injury, 1 = partial tear, 2 = full-thickness tear, and 3 = complete rupture) based on an official reading of the shoulder MRI. We compared the AIs of both modalities between the groups.

RESULTS

Intraclass correlation coefficients of the AIs between the two examiners were 0.819 for MRI and 0.808 for plain X-ray. The mean AI from standard X-ray was greater than that from MRI (P<0.0001). There was no statistical correlation between the AI and the severity of supraspinatus tendon injury.

CONCLUSION

Our findings indicate that the AI cannot be generally used as a predictive reference for the stratified severities of supraspinatus tendon injury.

Acromial morphology is not associated with rotator cuff tearing or repair healing

BACKGROUND

The purposes of this study were to determine whether acromial morphology (1) could be measured accurately on magnetic resonance images (MRIs) as compared to computed tomographs (CTs) as a gold standard, (2) could be measured reliably on MRIs, (3) differed between patients with rotator cuff tears (RCTs) and those without evidence of RCTs or glenohumeral osteoarthritis, and (4) differed between patients with rotator cuff repairs (RCRs) that healed and those that did not.

METHODS

This is a retrospective comparative study. We measured coronal, axial, and sagittal acromial tilt; acromial width, acromial anterior and posterior coverage, and glenoid version and inclination on MRI corrected into the plane of the glenoid. We determined accuracy by comparison with CT via intraclass correlation coefficients (ICCs). To determine reliability, these same measurements were made on MRI by 2 observers and ICCs calculated. We compared these measurements between patients with a full-thickness RCT and patients aged >50 years without evidence of an RCT or glenohumeral osteoarthritis. We then compared these measurements between those patients with healed RCRs and those with a retorn rotator cuff on MRI. In this portion, we only included patients with both a preoperative MRI and a postoperative MRI at least 1 year from RCR. Only those patients without tendon defects on postoperative MRIs were considered to be healed. In these patients, we also radiographically measured the critical shoulder angle.

RESULTS

In a validation cohort of 30 patients with MRI and CT, all ICCs were greater than 0.86. In these patients, the inter-rater ICCs of the MRI measurements were >0.53. In our RCT group of 110 patients, there was greater acromial width [mean difference (95% confidence interval) = 0.1 (0, 0.2) mm, P = .012] and significantly less sagittal acromial tilt [9° (5°-12°), P < .001] than in our comparison group of 107 patients. A total of 110 RCRs were included. Postoperative MRI scans were obtained at a mean follow-up of 24.2 ± 15.8 months, showing 84 patients (76%) had healed RCRs. Aside from acromial width, which was 0.2 mm different and thus did not have clinical significance, there was no association between healing and any of the measured morphologic characteristics. Patients with healed repairs had significantly smaller tears in terms of both width (P < .001) and retraction (P < .001).

CONCLUSION

Although the acromion is wider in RCTs, the difference of 0.1 mm likely has no clinical significance. The acromion is more steeply sloped from posteroinferior to anterosuperior in those with RCTs. These findings call into question subacromial impingement due to native acromial morphology as a cause of rotator cuff tearing. Acromial morphology, critical shoulder angle, and glenoid inclination were not associated with healing after RCR. This study does not support lateral acromioplasty.

A biomechanical confirmation of the relationship between critical shoulder angle (CSA) and articular joint loading

BACKGROUND

The critical shoulder angle (CSA) has been shown to be correlated with shoulder disease states. The biomechanical hypothesis to explain this correlation is that the CSA changes the shear and compressive forces on the shoulder. The objective of this study is to test this hypothesis by use of a validated computational shoulder model. Specifically, this study assesses the impact on glenohumeral biomechanics of modifying the CSA.

METHODS

An inverse dynamics 3-dimensional musculoskeletal model of the shoulder was used to quantify muscle forces and glenohumeral joint forces. The CSA was changed by altering the attachment point of the middle deltoid into a normal CSA (33°), a reduced CSA of 28°, and an increased CSA of 38°. Subject-specific kinematics of slow and fast speed abduction in the scapular plane and slow and fast forward flexion measured by a 3-dimensional motion capture system were used to quantify joint reaction shear and compressive forces.

RESULTS

Increasing the CSA results in increased superior-inferior forces (shearing forces; integrated over the range of motion; P < .05). Reducing CSA results in increased lateromedial (compressive) forces for both the maximum and integrated sum of the forces over the whole motion (P < .01).

DISCUSSION/CONCLUSION

Changes in the CSA modify glenohumeral joint biomechanics with increasing CSA producing higher shear forces that could contribute to rotator cuff overuse, whereas reducing the CSA results in higher compressive forces that contribute to joint wear.